hi all
i hope someone can help me
my phone g530fz not working and stuck at firmware upgrade encountered an issue.
at first my phone was stuck at samsung logo and when go to recovery ad try to wipe data it say invalid argument and failed
i download firmware and flash with odin and phone work good ,but there was pattern and i dont know it .
i try to wipe data with recovery but its show many red words failed ,invalid ............. and pattern still
so i think recovery is the problem . i download 2 recoveries and flash it with odin i think its custom and then phone dont boot to recovery again.
now phone stuck at firmware upgrade encountered an issue. i try to flash firmware but it fail odin say
<ID:0/048> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G530FZXXU1ANL7_CL317414_QB3379585_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G530FZXXU1ANL7_CL317414_QB3379585_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G530FZXXU1ANL7_CL317414_QB3379585_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXX_G530FZOXX1ANL4_CL327389_QB3452640_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/048> Odin engine v(ID:3.1005)..
<ID:0/048> File analysis..
<ID:0/048> SetupConnection..
<ID:0/048> Initialzation..
<ID:0/048> Set PIT file..
<ID:0/048> DO NOT TURN OFF TARGET!!
<ID:0/048> FAIL!
<ID:0/048>
<ID:0/048> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/048> Removed!!
its rom 4 files and try other rom and say same thing .
plz i need help
no one can help me ???
You need the pot file, my mother has a g530fz and it is dead now, i need for her phone the pit file, but nobody has it.
Sent from my SM-G901F using XDA Free mobile app
Related
What happened:
last night I was working late while reading WhatsApp groups messages from time to time. I noticed the battery reached ~30% then decided to charge the phone. Few minutes later, all of sudden Samsung logo appeared, I thought it was restarting but it keeps freezing on that screen.
What I noticed:
1. Few minutes before it died, I noticed the performance was poor.
I disabled "power saving" to unleash the processor and see what happen.
my S3 looked as if it was gaining some power then losing it. this is when I decided to leave it charging. I spent many years troubleshooting PCs, I'm new to PDAs but I felt that there's big thing happening and the phone will show that sooner or later!
2. I can't access recovery mode. Only download mode is accessible.
3. in download mode, product name is empty
What I did so far:
I'm trying to flash with stock I9300XXELLA, I have (bootloader, PDA, MODEM & CSC)
I used two different releases of Odin:
1. Odin v3.04 error
with (re-partition) selected:
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Can't open the specified file. (Line: 2564)
<ID:0/020> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
w/out (re-partition)
he error is (There is no PIT partition)
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020>
<ID:0/020> There is no PIT partition.
<ID:0/020> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
2. Odin v3.07 error
with (re-partition) selected:
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
w/out re-partition:
(There is no PIT partition)
Code:
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020>
<ID:0/020> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm newb to this, I appreciate your help.
try this.. i dont know if it ll work ...
download this file http://checkrom.com/threads/resurrec...%84%A2-v4.896/
get into odin and flash this file into your phone through the download mode ... if everything works it should boot into cwm recovery .. then wipe data\factory reset , wipe cache , wipe dalvik cache and reboot ... wait 15 mins and it should work!! Good Luck!
@galaxys3lover : I'm trying this now.
What I did so far:
after the PIT partition error. I downloaded the PIT file of 16GB SGS3.
Started flashing with Odin with re-partition selected. It stucks on "Get PIT mapping.."
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXELLA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAELLA_BTU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
I searched about the error on the fourms and found many members say it's better to use odin on windows XP, so I installed windows XP on VMware and tried flushing ,, however I still get the same error.
@galaxys3lover
not working, same errors. it looks like sudden death
I have same issue with two of SG3 devices, it's sucks
My nephew has the same issue, but he's not rooted.
Sent from my GT-I9300 using xda app-developers app
if flashing the stock ROM and pit file fails, the only option is to replace the motherboard. that's all there is to it
I only flashed this PDA file:
I9300XXEMA2
Where can I find the CSC and or pit files?
on sammobile
Had Same Exact problem, waiting for someone good reply... desperately.. tried every thing to do with odin no lock pit file error.. don't really want to go to service center.. waiting for some genius xda users guide
heloo sir i am new to this forum and my problem is that my samsung gt-b5512 stucks at white screen during booting when i press the power button
this happens due to wrong firmware flashing of another galaxy y model and after then when i flashed it with the right firmware files of b5512 this below message occurs .so sir please help me because i know you can
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_B5512JXLA1_REV00.tar.md5 is valid.
<OSM> PDA_B5512JPLA3_REV00.tar.md5 is valid.
<OSM> MODEM_B5512JXLA1_REV00.tar.md5 is valid.
<OSM> GT-B5512-MULTI-CSC-OJPLA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
viouseds was
please anybody help me
Hi,
This device has the android stock rom (don't know which version) and the stock recovery.
Tried to flash it via odin but no hope, always getting FAIL message. tried all versions of ODIN, even with PIT file, but same results.
Could it be a hadware issue (NAND defective ?).
Any help appreciated.
What caused the bootloop? What part of the flash is it failing on? Not knowing what version was on it before would probably be why you are having issues with reloading the original firmware. The firmware you load in Odin should be the same version or newer and from the correct region or carrier, if it is specific to one. Very unlikely it is a hardware issue.
es0tericcha0s said:
What caused the bootloop?
Click to expand...
Click to collapse
Don't know (device belongs to a friend, he said a virus caused the bootloop-not right IMO-)
es0tericcha0s said:
What part of the flash is it failing on?
Click to expand...
Click to collapse
Odin3 v1.83 - v3.04 :
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_Bootloader_XXKL1.tar.md5 is valid.
<OSM> GT-S5690_PDA_XXKL1.tar.md5 is valid.
<OSM> GT-S5690_Phone_XXKL1.tar.md5 is valid.
<OSM> GT-S5690_CSC_PROKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Set PIT file..
<ID:0/014> DO NOT TURN OFF TARGET!!
<ID:0/014> Complete(Write) operation failed.
<ID:0/014> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 v3.07 - v3.10:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_Bootloader_XXKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_PDA_XXKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_Phone_XXKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_CSC_PROKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Removed!!
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
es0tericcha0s said:
Not knowing what version was on it before would probably be why you are having issues with reloading the original firmware. The firmware you load in Odin should be the same version or newer and from the correct region or carrier, if it is specific to one. Very unlikely it is a hardware issue.
Click to expand...
Click to collapse
So I must try with every available firmware out there ?
Firmware used:
GT-S5690_XXKL1_XXKL1_PROKL1_home (Includes: (Bootloader, CSC, PDA, Phone) Files)
gt-s5690_xxld3_xxld3_neekk8_home (Includes: (CSC, PDA, Phone) Files)
gt-s5690_xxlg3_xxlg3_dbtlf1_home (Includes: (CSC, PDA, Phone) Files)
Stock Recovery:
E:failed to mount /data (Invalid argument)
-- Applying Multi-CSC --
Note: even a hard reset does nothing (obviously).
Any solutions guys
Just installed it, they should have waited another week & released December with it :/ haha
Do you have the US version?
Iradj said:
Do you have the US version?
Click to expand...
Click to collapse
Yes, I've got the N950U1 which is listed in the screenshot
Same here, downloading now.
Here's an article about the Verizon versions Camera update and its also included in the Unlocked version.
https://www.phonearena.com/news/Ver...s-and-security-improvements-included_id100180
xbmoyx said:
Here's an article about the Verizon versions Camera update and its also included in the Unlocked version.
https://www.phonearena.com/news/Ver...s-and-security-improvements-included_id100180
Click to expand...
Click to collapse
It's here too. For the unlocked one I bought from BestBuy and have a Verizon sim in it.
View attachment 4345232
Do you guys have the wifi calling option in settings with the unlocked firmware?
borijess said:
Do you guys have the wifi calling option in settings with the unlocked firmware?
Click to expand...
Click to collapse
I am not seeing it, only VoLTE
Still no update for the EU unlocked version (SM-N950F)
borijess said:
Do you guys have the wifi calling option in settings with the unlocked firmware?
Click to expand...
Click to collapse
It usually is under phone settings
Samsung has forgotten about Europe regarding the Note 8, seems they don`t realy care about 750.000.000 habitants appearently .......
borijess said:
Do you guys have the wifi calling option in settings with the unlocked firmware?
Click to expand...
Click to collapse
You'll see it with Sprint & T-Mobile SIM cards, but not AT&T or Verizon :/
Sent from my iPad Pro using Tapatalk
Can any one share the update package for unlocked verizon .zip file, in order to update from recovery or ADB.. i'm having issues flashing the whole rom:
SM-N950U1_N950U1UEU2BQK1_XAA , with the below log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Odd, my US unlocked Note 8 doesn't even tell me what build number I'm updating to LOL
Sent from my SM-N950U1 using Tapatalk
betovanbuuren said:
Can any one share the update package for unlocked verizon .zip file, in order to update from recovery or ADB.. i'm having issues flashing the whole rom:
SM-N950U1_N950U1UEU2BQK1_XAA , with the below log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You may have a bad download if all failed..I uploaded a link to my main thread
WinDroidGuy said:
Just installed it, they should have waited another week & released December with it :/ haha
Click to expand...
Click to collapse
Please amend your title with "USA"!
Thanks
myechophone said:
It usually is under phone settings
Click to expand...
Click to collapse
Nope.
Do you guys have option for VOLTE or Visual Voicemail?
xbmoyx said:
Nope.
Click to expand...
Click to collapse
Weird. I am running t-mobile and have the WiFi calling settings in phone settings
borijess said:
Do you guys have option for VOLTE or Visual Voicemail on ATT?
Click to expand...
Click to collapse
On ATT?
hey
ive been trying to put stock bk on my S7 but everytime i try i get stuck. can someone help me please.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G930FXXU3ESA3_CL14843133_QB21430938_REV00_user_low_ship_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G930FXXU3ESA1_CP11571482_CL14843133_QB21354641_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G930FXXU3ESA3_CL14843133_QB21430938_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_CSC_TEF_G930FTEF3ESA1_CL15134152_QB21409472_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin.lz4
<ID:0/005> NAND Write Start!!