I successfully installed CyanogenMod 12 on my LG LS990, but I'm having some problems involving the SIM card. My carrier is Cricket (or AT&T), and I am able to send and receive calls and text messages, as well as download and browse the internet. The speeds are very fast.
However, it gets wonky most of the time. On the notification menu for my G3 as well as the phone setting, it is still listed as Sprint. It will also turn off randomly and show an "R" at the top and will glitch out. On several occasions, a pop-up will show up and say something like "com.phone.android has stopped working" and the bars at the top will disappear all together. This seems to happen when I turn the display off or put it to sleep
On the mobile data settings,I have put data roaming on, LTE, CDMA roaming to automatic and "NV". I am not sure what most of these settings mean, but on the access points menu " cricket" is checked. I cannot change the NV setting to SIM.
I receive notifications from Cricket. Texting and Calling works completely fine. I'm wondering why it stops working for a while when I put the phone to sleep or why everything is listed as Spring when it isn't. Thanks.
Related
ive been using the phone for a few weeks now and it was fine until today, i cant connect to the internet via edge . ive tweaked with all the settings but nothing seems to work. everything else is fine . ie i can make calls and send text's but i cant connect to the internet. i checked under the status and it shows the mobile network state is disconnected. i have no clue as to wat this is since im new to android.
pls help!
Have you turned MOBILE DATA off via the power on/off menu .
jje
ive checked that too.
Go to Settings- Wireless and Network- Mobile Networks- Access Point Names and see if the APN is ticked or not or the correct APN is ticked.
everything is back to normal again,it connected to the internet, by itself . must be a random bug in the os
problem solved. peace
I have experienced the same thing with my phone, except that it shows "activated". After a while it just started working again.
I've had the phone for a couple of months now and everything has worked fine till now, a little bugs here and there but no issues. A few weeks back (on android 2.3.3) I was unable to make or receive calls, but surprisingly was able to make text messages. I tried everything, turning flight mode on/off; the phone on/off; etc. I was on the verge of contacting Samsung but then suddenly the thing started working once I came back home from the office.
There has been no problems till then but today suddenly (now on android 2.3.6) the outgoing calls no longer work, same for outgoing text message; but I still get incoming calls and messages.
Just to be sure that this wasn't a SIM or service issue, I tried changing SIM's (different SIM did not work on the phone) and used my SIM on different phone (where it worked).
Also 3G doesn't work as well, but connection here is spotty so I wouldn't trust that. The only message I see different on the 'About Phone' tab is 'Mobile State-Disconnected'. I have full signal strength and all that.
My thoughts are that it was, or rather is a phone specific issue and would appreciate someone else's thoughts on the matter. As to my problem I assume it will sort itself out in a little while.
FYI: Samsung Galaxy S2; Android 2.3.6; NOT rooted; Indian version; On Airtel Mobile Network.
Mobile network state disconnected.
Hi guys, I have the same problem with my network connection also my 3g does not work anymore, I`m play with some secret codes like a ##72786# on my epic 4g touch sprint phone flashed to metro pcs and now I have no 3G service. In the setting menu under network status say Sprint. How can I get my 3g back?. The mobile net. 3G is on and the wifi is off. I need to change the network to metro pcs in the status setting and how can do that? Thanks for your help and sorry for my bad English.
Yesterday, my phone was working fine. Today, I wake up and instead of showing H or E in my signal bar area, I just have the bars which are full.
I can send and receive texts, but no photos. No webpages are accessible, email won't sync etc. But I can still make and receive calls as well.
I'm running Neutrino V2.5. This morning I flashed the 36P radio (from 30P) in hopes that might help. Didn't change anything.
Not sure if any of this is needed but here it is anyway:
Signal Strength - 93dBm 10asu
Mobile Network Type - HSPA
Mobile Network State - Disconnected
Wifi is still working fine as well.
Any help is greatly appreciated!
Luke
I'm experiencing the same issue. Not sure what's going on. I went into settings to search for available networks and it's been "Searching" for like 15 minutes. Behind the "Searching" dialog I can see two options for AT&T and looks like one for T-Mobile. If I try to press back to cancel the search, it just takes me back to the last screen. I've also tried resetting APN. ugh.
Check the APNs configurations you might have to set them again.
I read over Atrix Dev that there's a weird bug in Neutrino ROM 2.5 that remove the APNs.
Settings -> Wireless & Networks -> Mobile Networks -> Access Point Names
Hope that helps
Here's the deal, I bought my Rezound in 2012 and flashed it to PagePlus Cellular using CDMA WS.
I've used it and it's been fine, running CM10 most of the time. I just bought a Evo 4G LTE and switched to that. So I RUU'd my Rezound, and it says a SIM card is required, etc.. but there are no signal bars.
I go into About Phone > Network >
and Operater name is "Unknown," signal strength is "0", service state is "out of service."
Now, the question is, is that normal? Does the phone need a sim card to connect to verizon towers?
I don't want to sell it while it's not working. I did call up Verizon and they said the ESN was clear for activation though.
So if I sell it and the new user puts in a SIM card, will it clear up all the signal issues? Or have I done the RUU incorrectly? [I did it a couple times because it didn't work the first time (the SD card method, then I did fastboot method)]
Thank you!
That is not normal behavior and you may need to do some more work before you sell it.
Make sure all related network settings are correct for Verizon instead of GSM under Settings > Mobile Network menu.
Try entering on the stock dialer *#*#4636#*#* to access the hidden testing menu as well for the phone radio and verify it is on CDMA. If that code doesn't work on the dialer try it via an app like "Hidden Menus" or even "Battery Monitor Widget" by 3C (click "Tests" icon > Phone information from main page of app.)
Background: I broke off of my Verizon contract six months in and used my phone as a WiFi-only device (VoIP and internet texting apps) for the longest time. While I typically hid my signal icon and ran the phone in Airplane mode with WiFi toggled back on, I would occasionally turn my radio on to resync time and date to the cellular network. With no SIM in it clearly was syncing off Verizon CDMA signal still; I simply wasn't fully activated on the network any longer.
I just made the StraightTalk AT&T SIM card plunge the past couple of weeks and did an NV edit in CDMA WS as well, all alright on GSM. I am on the stock global ICS ROM at the moment, one I know could sync time on CDMA before. However, I cannot get the phone to switch off of GSM even in the hidden testing menu, even without SIM in... Likely has to do with the NV edits I made, and perhaps that may be your case too.
You *could* repurpose the sale as a GSM enabled unit... If it was even set up and working well as such. But due to the current technical issues of getting GSM mobile data above 2G I'd suggest to get it fixed and working back on stock CDMA for the consumer's sake if you can. Again AFAIK It should pick up a CDMA signal even without active service or the Verizon LTE SIM in, did so for over a year lol.
PhantasmRezound said:
That is not normal behavior and you may need to do some more work before you sell it.
Make sure all related network settings are correct for Verizon instead of GSM under Settings > Mobile Network menu.
Try entering on the stock dialer *#*#4636#*#* to access the hidden testing menu as well for the phone radio and verify it is on CDMA. If that code doesn't work on the dialer try it via an app like "Hidden Menus" or even "Battery Monitor Widget" by 3C (click "Tests" icon > Phone information from main page of app.)
Background: I broke off of my Verizon contract six months in and used my phone as a WiFi-only device (VoIP and internet texting apps) for the longest time. While I typically hid my signal icon and ran the phone in Airplane mode with WiFi toggled back on, I would occasionally turn my radio on to resync time and date to the cellular network. With no SIM in it clearly was syncing off Verizon CDMA signal still; I simply wasn't fully activated on the network any longer.
I just made the StraightTalk AT&T SIM card plunge the past couple of weeks and did an NV edit in CDMA WS as well, all alright on GSM. I am on the stock global ICS ROM at the moment, one I know could sync time on CDMA before. However, I cannot get the phone to switch off of GSM even in the hidden testing menu, even without SIM in... Likely has to do with the NV edits I made, and perhaps that may be your case too.
You *could* repurpose the sale as a GSM enabled unit... If it was even set up and working well as such. But due to the current technical issues of getting GSM mobile data above 2G I'd suggest to get it fixed and working back on stock CDMA for the consumer's sake if you can. Again AFAIK It should pick up a CDMA signal even without active service or the Verizon LTE SIM in, did so for over a year lol.
Click to expand...
Click to collapse
in the mobile network, I have it set to "CDMA / LTE" but I tried "CDMA only" and "Global" but none worked.
*#*#4636#*#* didn't work in stock dialer, it just disappeared when I finished typing it.
then I downloaded Hidden Menu, found *#*#4636#*#* in the list, tapped it, and it did nothing. I did some other ones and they did do something. I found htc diag mode, the same one I used to program it originally. I clicked read, and the phone number and min were blank. so I went to the prl and tried flashing a verizon prl file, then rebooted, and still nothing.
I'm going to try to RUU again and hope that solves it.
Update
I RUU'ed again, but still no luck..
Can anyone confirm whether or not, say you got a Rezound out of the box never activated, would you need a SIM card to get the signal initiated? I'm thinking either that's the case and my phone just needs a sim card to jump start it, or my rezound is toast.
I am attempting to switch my Verizon GS4 handset to Straight Talk Wireless, but I can't do anything to change the APN settings. I restarted my phone multiple times with the ST SIM in the slot, but it continued to connect to Verizon's network. Some research later, I found that I needed to change the APN to Straight Talk, but I can't.
Only Verizon's LTE access shows up in the menu. There's a + button at the bottom, but it's greyed out, with either SIM (tried both as per this HTC One thread). Pressing the menu softbutton gives me the "reset to default" option, also greyed out and inoperable.
The phone is rooted, still running Jellybean 4.2 MK2 because once I rooted, the OTA updates would fail, and I was never brave enough to try Safestrap. I'm worried this might be part of the same break.
tparadox said:
I am attempting to switch my Verizon GS4 handset to Straight Talk Wireless, but I can't do anything to change the APN settings. I restarted my phone multiple times with the ST SIM in the slot, but it continued to connect to Verizon's network. Some research later, I found that I needed to change the APN to Straight Talk, but I can't.
Only Verizon's LTE access shows up in the menu. There's a + button at the bottom, but it's greyed out, with either SIM (tried both as per this HTC One thread). Pressing the menu softbutton gives me the "reset to default" option, also greyed out and inoperable.
The phone is rooted, still running Jellybean 4.2 MK2 because once I rooted, the OTA updates would fail, and I was never brave enough to try Safestrap. I'm worried this might be part of the same break.
Click to expand...
Click to collapse
In my experience, IT DOESN'T MATTER!!!
I do NOT mean that in any disrespectful way to you, but I DO mean it in a way against Verizon and Tmobile.
I have the same phone AND the same problem with service; however, I CAN add an APN. The catch is IT STILL CONNECTS TO VERIZON!!!
Now, my phone updated to the utter crap that is Lollipop, and I can no longer get my call-Verizon-voicemail-and-disconnect workaround to work as the connection is a lot more seamless and does not drop/fully disconnect after the call disconnects. Before, I'd goto my notifications and see "NO SERVICE" in the bottom of the slide down box with my VZW voicemail notification with it's 10 voicemails. Then, I'd do my workaround and everything would work (and, by everything, I mean text messaging as voice and data WERE working pre-workaround). But, like I said, now I can no longer do that (Lollipop SAYS it's connected to Tmobile off the bat (right after booting up); however, I CANNOT send text messages NO MATTER WHAT I DO!!!
It's completely aggravating and how Verizon can say they sell a phone "UNLOCKED" when their APN is in there with other APNs and GREYED OUT so you CANNOT REMOVE IT (which, as I've shown above, causes massive problems) and how Tmobile can say ON THEIR SWITCH WEBSITE that my VERIZON SAMSUNG GALAXY S4 *WILL* WORK on their network... it's all beyond me. It's deceptive/straight up lying marketing and the way Tblowbile always tells me they cannot support my phone and to buy a new phone WHEN THEIR OWN WEBSITE SAYS IT WILL WORK is 100% bait and switch and up for a class action lawsuit!
Update: it does appear my service with the ST SIM really is through my Straight Talk account now, despite what the APN settings show. I got my device activation text from ST. This makes sense, since Straight Talk is a virtual carrier buying airtime from the real networks like Verizon.
However, I don't have an LTE connection. I don't have any data connection, just voice and SMS. I'm not sure if that's a problem on my end or the carrier's, but getting the data I'm paying for is less of an emergency than not having any mobile communication.
Has anyone found a work around for this. On straight talk, I can get calls and even internet when set to global network. I cannot text either sms or mms. My APN setting completely grayed out. I can not add or change existing and tried an apn manager with no luck.
I suspect I'll have to flash a completely Verizon-less build to fix it, but I did have an ST representative call me to ask if everything was working and offer to try to help me fix it. I just didn't have time right then and they didn't call back when I asked them to.
Just my experience
Hey not sure if this will help anyone out but I'll add what I've experienced. I have a gs4 running hyperdrive and my data service from straight talk has cut out a couple times before. The first time I just waited, and it fixed itself after a day or two. Second time I called ST and they told me to restart my phone (like I hadn't done that 10 times already). Later that day, data randomly comes back. I noticed that the fix for me was to switch apn settings. Somehow my phone did it automatically. But now my data is MUCH slower than before. Straight talk seems to be a tricky company. You never really know what you'll get with them. Just other carriers' sloppy seconds. Cutouts also seem more common at the end of usage cycles. Seems a lot of people fix it by calling ST
Also, I can edit my APN. Not sure if it's because I'm on an aftermarket ROM or what. But now I'm on the hunt for an APN with better data speeds if possible.
Straight Talk APN
It took me 3 months of calling Straight Talk and telling them they needed to send the right APN settings to my phone, after they finally listened it took 2 minutes until I received a text saying they updated my APN settings. I had the exact same problem as you. I had voice and SMS but not data. And my APN settings were greyed also. Now it says
Verizon Internet
TFTWO.GW9.VZWENTP
You just have to get them to update the APN. Getting them to listen is the hardest part! I hope this helps!
I just got a P9000 today and after a quick setup of the device via wifi I proceeded to inset my sim card from the uk network 3/three.
Now my network shows up when doing a search, and in the SIM settings it shows 3 UK for all options, but only the calls option is greyed out, and I am unable to make any calls with the phone whatsoever.
I don't get the no network message error (except when I am in an area with no coverage i.e. in my house) .
I've tried the sim card in both slot 1 and 2 to no avail.
I get 3 showing up in the notification tray icon which toggles data, plus it shows 3/4g next to the signal strength bar when I'm somewhere that gets a mobile signal.
It even show the correct network in the SIM status within the about phone section of android settings with the correct IMEI number.
Does anyone have any idea on my issues and any potential fixes/test/things I can try in order to get calls working?
Seems like my problem solved itself and I can now make calls.
Don't know what was/is wrong but calls option is still greyed out, though I made 2 test calls this morning (to Landline and mobile) which worked, then later on I made a call of a few minutes which worked as well.