I posted in Chulri's thread but here will be better seen from anyone.
Device : A70IT , fw 2.1.08
Is anyone willing to try something I DID and seems to me to give my tablet significant speed increase. I want to check if it is real or just my imagination.
In my latest fw 2.1.08 installed, I flashed 2.1.08 initframs and 2.0.71 zimage (both from chulri files, first post . you know how to : flash kernel from developer menu at boot holding vol- button)
And I set the speed with SetCPU 2.1.1a to 1000mHz both min and max. Also in settings menu I choosed "Overdrive"
Please test and report.
Thanks
lagoskon said:
I posted in Chulri's thread but here will be better seen from anyone.
Device : A70IT , fw 2.1.08
Is anyone willing to try something I DID and seems to me to give my tablet significant speed increase. I want to check if it is real or just my imagination.
In my latest fw 2.1.08 installed, I flashed 2.1.08 initframs and 2.0.71 zimage (both from chulri files, first post . you know how to : flash kernel from developer menu at boot holding vol- button)
And I set the speed with SetCPU 2.1.1a to 1000mHz both min and max. Also in settings menu I choosed "Overdrive"
Please test and report.
Thanks
Click to expand...
Click to collapse
Of course it is real, since your tablet will run at maximum speed all the time instead of running at 1000mhz for heavily load task only like default (not count the overclock here). However, it will consume more battery and get hot faster.
If you don't care much about battery life, then it will do the trick.
Before the 2.0.71 zimage kernel I was running at full speed the 2.1.08 kernel. After the switch I noticed more speed gain. That's why I need confirmation from other users.
I have had my A70 set to 1000 min and 1200 max for months now, and I have seen a speed increase, and only a little extra battery drain.
lagoskon said:
I posted in Chulri's thread but here will be better seen from anyone.
Device : A70IT , fw 2.1.08
...
Click to expand...
Click to collapse
What kind of test you want to?
Have you try OverClock? Archos Gen8 can OC to 1.2GHz as well
hey guys.
i need help about usb otg.
when i connected flashdisk,sometime its work,but in a few minutes its remove,
i cann't connect again,.
can anybody help me?
i use ics remix rom v8.6
thank you
sorry for my bad english
I don't think Usb OTG compatible with ICS yet, I tied some ICS custom ROM but no luck
sikcool said:
I don't think Usb OTG compatible with ICS yet, I tied some ICS custom ROM but no luck
Click to expand...
Click to collapse
oh really?
so we must wait ics fix version?
okey sikcool,thanks for answers
We now have the RC4.1 of Ice Cream Sandwich 4.0.3 by Team ICSSGS (Previously known as Onecosmic’s Port) for Samsung Galaxy S GT I9000 (International), I9000b, Captivate & Vibrant. The major changes in this release are:
Changelog:
Blurryness Fixed
Wifi/Data Issue Resolved (Problem in RC4)
Implemented SIO, VR, Deadline I/O schedulers
SIO is now the default I/O scheduler
Google keyboard(Faster and comes from Google themselves)
Galaxy Nexus kernel splash, clean Google logo
Removed doubled busybox
Sharpened up bootanimation
ROM cleanup
Removed WiFix Manager cover up the wifi issues
Notable increase in speed \o/
Changed RIL code to CM one, cleaner code implementation
New updater script which to prevent issues when flashing
In browser, ‘Exit to car mode’ now fixed to ‘Find on Page’
Deep idle working with framework integration
100MHz now works
Application purchase from Android Market now possible
All video effects working flawlessly in Camera now!!
Pictures editing in Gallery works now
Screen flicker upon lock is now gone
Odexed optimisation
Battery Life eXtender
Slightly tweaked read ahead values
Sztupy’s USB OTG V5 (YES, Now connect external HDDs, Flash Drives or even your DSLRs to the phone via USB just as Galaxy S II)
WiFi fix for those with issues with wifi not working with screen off
Unstable voltages fixed
Facebook sync works now
USB Transfer Speed fixed
Back to AOSP Music
Your problem got solution
Just check latest ics remix v9.0
hitmedia said:
We now have the RC4.1 of Ice Cream Sandwich 4.0.3 by Team ICSSGS (Previously known as Onecosmic’s Port) for Samsung Galaxy S GT I9000 (International), I9000b, Captivate & Vibrant. The major changes in this release are:
Changelog:
Blurryness Fixed
Wifi/Data Issue Resolved (Problem in RC4)
Implemented SIO, VR, Deadline I/O schedulers
SIO is now the default I/O scheduler
Google keyboard(Faster and comes from Google themselves)
Galaxy Nexus kernel splash, clean Google logo
Removed doubled busybox
Sharpened up bootanimation
ROM cleanup
Removed WiFix Manager cover up the wifi issues
Notable increase in speed \o/
Changed RIL code to CM one, cleaner code implementation
New updater script which to prevent issues when flashing
In browser, ‘Exit to car mode’ now fixed to ‘Find on Page’
Deep idle working with framework integration
100MHz now works
Application purchase from Android Market now possible
All video effects working flawlessly in Camera now!!
Pictures editing in Gallery works now
Screen flicker upon lock is now gone
Odexed optimisation
Battery Life eXtender
Slightly tweaked read ahead values
Sztupy’s USB OTG V5 (YES, Now connect external HDDs, Flash Drives or even your DSLRs to the phone via USB just as Galaxy S II)
WiFi fix for those with issues with wifi not working with screen off
Unstable voltages fixed
Facebook sync works now
USB Transfer Speed fixed
Back to AOSP Music
Click to expand...
Click to collapse
thanks hitmedia,but i use sgs2 i9100,
but thanks for informations,
i'll check this ROM.maybe i can use for my dad sgs(i9000)
manoj971 said:
Just check latest ics remix v9.0
Click to expand...
Click to collapse
okey,now try to install v9.0
hope it's fix usb otg
thanks rolleyes
usb otg worked for me on 8.6, I transferred a 500 mb file from my phone to a pendrive
kryptoner said:
usb otg worked for me on 8.6, I transferred a 500 mb file from my phone to a pendrive
Click to expand...
Click to collapse
first i plug flashdisk,i open usb storage (with my files)
it's nothing.
so i unplug,then plug again,it's can connect,
i can copy files from flashdisk.
when finish,it's disconnected again and i cann't reconnect.
what do u thing?can u help me?
maybe it's need a trick?
It worked here only with root explorer, but device didn't hang out? Found no menu entry?
install ics remix rom v9.0
and now it's work.
usb otg,safely remove disk.
great job westcrip
thanks manoj971 and kryptoner
I installed the Build 34 of this ROM and flashed the sirkay kernel in my Neo V. I am having a strange issue with Wifi speed. It is not slow consistently but it downloads few KBs in good speed and then pauses for 2-3 minutes then downloads the next few KBs. I tried the suggestions in the ROM thread.
a. Search for /etc/tiwlan.ini but could not find a file like that
b. Changing channel from 11 to 1 in my Wifi router, but that also did not work out
c. Tried with the original Kernel same issue
I love this ROM especially with the customizations it offers compared to plain CM 9 with FXP. But due to this Wifi issue am not able to use this on daily basis. Am not able to post this on dev forum as am a N00B, anyone please help
Regards,
Ram
When i updated to ICS, i am also having this issue. now i am waiting and keep searching on every thread for a solution. Because even SONY also be silent on this WIFI issue !!! ...
Thanks for the response. I am not getting the issue with FXP 117 CM9 on default kernel, Wifi works as usual on that. In fact it is my daily use ROM for now.
Regards,
Ram
Please use search function:
http://forum.xda-developers.com/showthread.php?t=1629681&highlight=ics+wifi
http://forum.xda-developers.com/showthread.php?t=1608964&highlight=ics+wifi
http://forum.xda-developers.com/showthread.php?t=1619493&highlight=ics+wifi
http://forum.xda-developers.com/showthread.php?t=1620332&highlight=ics+wifi
http://forum.xda-developers.com/showthread.php?t=1583984&highlight=ics+wifi
http://forum.xda-developers.com/showthread.php?t=1559994&highlight=ics+wifi
http://forum.xda-developers.com/showthread.php?t=1526624&highlight=ics+wifi
[Q] MESA Kernel 2.6 - headset not recognized & settings-->applications freezing
Hello,
i'm using CM10 Nighlties builds for my Xperia Active ST17.
I've tried with some success and really better performance the MESA JB Kernel from an0nym0us_. This kernel is wonderful, and i really thanks the developper for his work.
But on my device, i encounter two annoying bugs :
1st : when i connect m headset (a Phillips Fidelio M1) this one is note recognized with the latest version of the Kernel (2.6) and works perfectly with the old version i'm using (v2.4) (also report here http://forum.xda-developers.com/showpost.php?p=35989938&postcount=1432, but no solution ?!)
2nd : when i try to use the Applications Settings, to see the property of an installed application for example, i encounter serious freezing or FC. I tought it was my SD card ('cause i'm using a 64Gb µSD Card) but everything works great appart that. (also report here : http://forum.xda-developers.com/showpost.php?p=35839687&postcount=1419 but no solution ?!)
Can you tell me what i'm doing wrong, if it's user errors or some bugs in the kernel ?
Thanks in adance.
Discussion thread for the Samsung Galaxy Player 3.6 (YP-GS1) running CyanogenMod 11
Also known as: Samsung Galaxy S WiFi 3.6
Development thread: http://forum.xda-developers.com/showthread.php?t=2657738
Hello XDA,
this the official discussion thread for users of the Samsung Galaxy Player 3.6 running CyanogenMod 11.
This thread is for holding the development thread clean.
What belongs here
Questions (& Answers)
Tips
Bug reporting
Discussing and talking
What not belongs here
Posts like: "YEAAAAAAH" or "Pls do tis for me and tis for mee thxk"
Asking for ETAs (Estimated Time of Arrival), like "When does the next update comes out?"
Rules
Don't flame anybody!
Don't spam!
Stay on topic!
Happy asking, answering and posting!
For the best CPU performance set the min. CPU frequency to 600 MHz in Settings/Performance/Proccessor, and activate 'Set on boot'
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
@Androthan is working on CM11 for the 4.2. Compiling just the kernel isn't enough, you'll need a device tree of the 4.2 made for CM11 and build a ROM with that.
Ca110 said:
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
Click to expand...
Click to collapse
Actually bluetooth isn't working, so I can't tell you.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
The kernel source for the 4.2 player, from my github account, are still under constructions and won't work.
And, of course, you don't need to compile it yourself.
I'll start with porting to 4.2 when the build for the 3.6 is a lot more stable.
BTW, the player 4.2 is off-topic here
Quentinga said:
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Click to expand...
Click to collapse
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Androthan said:
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Quentinga said:
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Click to expand...
Click to collapse
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Androthan said:
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Click to expand...
Click to collapse
I speak a lot, but I don't now how it's difficult because It's too hard for me =P
The bootanimation is kinda big for our screen. Maybe we can resize it?
Also, the home button in US version doesn't work.
Android 4.4.3
***Android 4.4.3 is out***
Google released the Android update 4.4.3. This update contains mostly bugfixes and improvements (Read more here: http://liliputing.com/2014/06/whats-new-android-4-4-3-kitkat.html) Don't expect any new features with this update. CyanogenMod is currently merging Android 4.4.3 into CyanogenMod 11, so we have to be patient. As soon as this is done, I'll update my local source code.
Expect Alpha 3 in the next 4 to 5 days.
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
I think CWM 5 is out for stock gingerbread rom one year ago : http://forum.xda-developers.com/showthread.php?t=2198234
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
Sorry but this isn't possible and will end in a soft brick.
Thanks @Quentinga & @Androthan, you saved me from making a stupidity
I keep an eye on this rom and will test soon.
Does music/video playback work on Alpha 2 ? (not able to use the sdcard space and Apollo crash everytime)
Phone feature is enable like in CM 7.2, or it's disable? (It is)
EDIT: (07/06/2014)
1) If the player is plugged in and switch it off, it will restart.
If, however, is not connected, then turns off simply.
2) In alpha2 there isn't the performance menu in option.
Any news with wifi module ? the awesome @zaclimon can't help you ?