I tried to install a new rom(cynogenmod 11 from xda forums) in my lenovo a6000 which i god a day before on my birthday. it had lollipop os and i installed TWRP recovery in it. but the instructions for installing rom said to clear data. dalvik, cache before installing and the twrp cleared cache and delvik cache but then it had been over 5 min and it still stated -"formatting data by mounting(bla... bla...) method". so i just reboot the phone by removing the battery and booted in the recovery again. i tried to clear them again but this time all of those three stated mounting problems while clearing. i went on installing the rom but it stuck too stating only these lines:-
1>no md5 checksum found.
2>skipping md5 checksum(bla.. bla...).
so i did the same mistake again and removed the battery to reboot but now it just shows the lenovo logo on bootup and nothing happens thereafter except frequent restarts. i tried to connect it to pc to load recovery via minimal adb and fastboot but the phone is just charging itself via usb cable and not connecting to the pc no matter i reinsert the battery.
i dont want to reach the service center or my dad will kill me for damaging a new phone. please if anyone can help then reply soon or i am gonna screwed.
Just press volume - & power key same time , now your phone is in boot loader mode now connect USB & flash twrp recovery through minimal adb method & restore your backup
Sent from my Lenovo A6000 using XDA Free mobile app
To be continued
Oh I somehow figures it out, I pressed all the keys I.e. volumeup + volumedown + power key even after the Lenovo powered by android logo and it suddenly booted into recovery. This method worked in my bq s37 I didnt expected it in this case. BTW thanks for your support and can u please help in in a new case related to same. The twrp recovery for a6000 lollipop is not installing cm11 properly. Every time I install using the same method as mentioned in a post of XDA. After installation it stops on the same screen:- Lenovo (powered by android) and after that no reboot just that screen forever till the battery dies. I even tried cleaning /system before installing cm11 ROM but still no progress. Please help!
You cannot install cm11 on top of stock Lollipop rom
Revert it back to kitkat flash recovery Then install cm11
Get it of one problem and the other awaits. Now when installing KitKat rom (the official one from techotally) it said unable to mount /data. I followed some tutorial which asked to write some codes from adb shell menu. One of the codes said something like -kill recovery, after what my recovery frooze. I restarted the phone by removing the battery but nothing is happening after that. I am trying to restart it in recovery or in bootloader or even normal restart. Everything in vain and nothing is shown on screen and not even boot logo or the lenovo powered by Android screen. But in my pc some drivers started installing out of which two were installed and two weren't please help.
Ahmad Tawfik said:
Follow this guide
QUOTE]
There is said that ensure the devise is connected as Qualcomm his 9008 drivers but for me windows iinstalls 9006 drivers and States failed to verify signature. I manually installed the 9008 drivers . the installed properly without error but in not cases m getting sahara error. Failed to download. Also my phone doesn't display anything, no display, no sound and no vibrating while powering on but the PC connats it as as Qualcomm hs..............
Click to expand...
Click to collapse
*in both the cases*
Ok I will help you
1- Download stock Lollipop firmware and place it in your sd and insert it in your phone
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S054_150915_WCAA.zip
2-hold volume down and power key and you will see fastboot under powered by Android
3- use fastboot to flash and boot into stock Lollipop recovery
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
http://www.mediafire.com/download/gcg2klu8fwam2sk/Recovery.img
4- in Stock recovery factory rest and wipe cache partition
5- apply update from Sd and select the stock Lollipop firmware the you placed on SDCard
6- Done your phone will boot to system successfully
If you want to install cm11 after fixing your phone
1-revert to kitkat stock firmware follow the guide (like the phone is bricked)
2- Install twrp recovery by fastboot
http://lenovo-forums.ru/index.php?app=core&module=attach§ion=attach&attach_id=36985
3- Install cm11 and enjoy
Note:
place the files you want to fastboot in the fastboot folder
Sent from my GT-I9300I using Tapatalk
You are not correctly getting it my friend. i said the phone doesnt boot at all no matter what key combinations are tried. it simply doesnt start. no display no vibration no sound nothing just the pc detects it as qualcomm hsusb.........
BTW in the mean time my father got to know about this condition. he scolded me but asked to fix it if i can before going to service center. i was just thinking what if they got to know that i rooted the phone? or installed custom recovery in it? anyway if i am to go to the service center the statement given by me will be that:- while updating via ota from kitkat to lollipop the battery died and this all happened. an yes i live in INDIA time zone=+5:30 GMT so tell me when i can find you online(time?) my friend so we can try fixing my phone also it will be help full if we become friends on facebook? so that we can chat live clearly and for as long as we want. so that i can ask you about any problem occouring in future directly without creating a forum in xda. so please buddy please....... .... .. .
The Boy Who Cried Wolf said:
You are not correctly getting it my friend. i said the phone doesnt boot at all no matter what key combinations are tried. it simply doesnt start. no display no vibration no sound nothing just the pc detects it as qualcomm hsusb.........
BTW in the mean time my father got to know about this condition. he scolded me but asked to fix it if i can before going to service center. i was just thinking what if they got to know that i rooted the phone? or installed custom recovery in it? anyway if i am to go to the service center the statement given by me will be that:- while updating via ota from kitkat to lollipop the battery died and this all happened. an yes i live in INDIA time zone=+5:30 GMT so tell me when i can find you online(time?) my friend so we can try fixing my phone also it will be help full if we become friends on facebook? so that we can chat live clearly and for as long as we want. so that i can ask you about any problem occouring in future directly without creating a forum in xda. so please buddy please....... .... .. .
Click to expand...
Click to collapse
My Facebook is [email protected]
I prefer hangout
[email protected]
Contact me any time and I will try to reply directly
Sent from my GT-I9300I using Tapatalk
After flashing the firmware link given by u , Ota will work or not ?
Sent from my Lenovo A6000 using XDA Free mobile app
amit1009000 said:
After flashing the firmware link given by u , Ota will work or not ?
Sent from my Lenovo A6000 using XDA Free mobile app
Click to expand...
Click to collapse
It will work and also this is the latest update
Sent from my GT-I9300I using Tapatalk
I know but only this update is not installing in my device 138mb , so i thinking to flash the full lolipop with this update by ur given link . can i do it ?
Sent from my Lenovo A6000 using XDA Free mobile app
amit1009000 said:
I know but only this update is not installing in my device 138mb , so i thinking to flash the full lolipop with this update by ur given link . can i do it ?
Sent from my Lenovo A6000 using XDA Free mobile app
Click to expand...
Click to collapse
Yes
Sent from my GT-I9300I using Tapatalk
Ahmad Tawfik said:
Ok I will help you
1- Download stock Lollipop firmware and place it in your sd and insert it in your phone
2-hold volume down and power key and you will see fastboot under powered by Android
3- use fastboot to flash and boot into stock Lollipop recovery
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
-- in Stock recovery factory rest and wipe cache partition
5- apply update from Sd and select the stock Lollipop firmware the you placed on SDCard
6- Done your phone will boot to system successfully
If you want to install cm11 after fixing your phone
1-revert to kitkat stock firmware follow the guide (like the phone is bricked)
2- Install twrp recovery by fastboot
http://lenovo-forums.ru/index.php?app=core&module=attach§ion=attach&attach_id=36985
3- Install cm11 and enjoy
Note:
place the files you want to fastboot in the fastboot folder
Sent from my GT-I9300I using Tapatalk
Click to expand...
Click to collapse
But why don't u understand that I can not boot in any mode the danm phone simply doesn't display anything no sound or vibrations and no change of mode too.just connected as quallcomm hsusb and nothing else and even with that and following the ways in the link provided before(boycracked unbrick a6000) I'm getting sahara download error.
Not Install
Dear
Ahmed
When I am try to install the zip its give an erro
phone does not switch to carrier can not install
status (101)
installation abbroat
Please help to install it.
amit1009000 said:
Dear
Ahmed
When I am try to install the zip its give an erro
phone does not switch to carrier can not install
status (101)
installation abbroat
Please help to install it.
Click to expand...
Click to collapse
You have to install it from stock recovery and to factory reset and wipe cache partition before installing the zip
Lenovo updates are very bad and may soft brick you phone
Sent from my GT-I9300I using Tapatalk
install
i tried with stock recovery but same problem.
So it seems I'm being ignored
Hey ahmed
Related
i cant boot my huawei u8180 into recovery
i rooted it by super one click
when i tried to flash recovery with rom manager premium it restarts then freeze in boot screen
tried to reset my phone from settings ,privacy it also reboot but freeze on boot
i dont know wt to do
PLZ HELP ME WITH THIS ISSUE
plz any one tell me anything i can do with this problem
i cant even reset my phone
plz reply
thanks guys , i solved my problem alone ,, and insalled cyanogenmod 7.2
everything is ok now
how do you solved your problem with huawei u8180? i have the same isue.
Sorry to bump an old thread
I'm having the exact same problem.
Rooted the 8180 with SuperOneClick, installed Rom Manager, from Rom Manager installed CWM 8160 version with sucess, and whenever trying to boot into recovery mod the phone just hangs while showing the hourglass icon.
I tried reflashing the CWM and it still hangs
Im still running the stock firmware/rom
Can you share how you solved this problem?
Hi, I had a similar issue and did a reboot in to the CWM by holding power, volume up and the "search button" (?) the right one any way. Then did a wipe/factory reset.
Norpan70 said:
Hi, I had a similar issue and did a reboot in to the CWM by holding power, volume up and the "search button" (?) the right one any way. Then did a wipe/factory reset.
Click to expand...
Click to collapse
So you could only boot into CWM by pressing power+volume+search? The regular way (power+volume) would lock up like it does to me, is that it?
Anyway I tried your key combination and it still freezes...
Codeman666 said:
Sorry to bump an old thread
I'm having the exact same problem.
Rooted the 8180 with SuperOneClick, installed Rom Manager, from Rom Manager installed CWM 8160 version with sucess, and whenever trying to boot into recovery mod the phone just hangs while showing the hourglass icon.
I tried reflashing the CWM and it still hangs
Im still running the stock firmware/rom
Can you share how you solved this problem?
Click to expand...
Click to collapse
Bug with rom manager, you should try flashing atleast 3 times and then try and go into recovery, happened to me also, just flash again through rom amanager.
Maeur1 said:
Bug with rom manager, you should try flashing atleast 3 times and then try and go into recovery, happened to me also, just flash again through rom amanager.
Click to expand...
Click to collapse
I already flashed about 5 times and still freezes
Hi,as for the fastboot instructions - I've found this to be a great help in getting adb and fastboot to work on my Win7 x64 installs,so you might want to give it a try. Also,I'm gonna upload in a bit the earlier recovery + recovery manager (if you want to try that before you play around with adb/fastboot) to flash it to your device + the device drivers.
Edit - The link for the file - http://ubuntuone.com/14mi7lUkJelsrNBr4z5Uy2 - 12.5 MB - contains the older recovery (you can still try to flash the newer one first if you want), 2 different driver packs and the aforementioned recovery manager.
bk109 said:
Hi,as for the fastboot instructions - I've found this to be a great help in getting adb and fastboot to work on my Win7 x64 installs,so you might want to give it a try. Also,I'm gonna upload in a bit the earlier recovery + recovery manager (if you want to try that before you play around with adb/fastboot) to flash it to your device + the device drivers.
Edit - The link for the file - http://ubuntuone.com/14mi7lUkJelsrNBr4z5Uy2 - 12.5 MB - contains the older recovery (you can still try to flash the newer one first if you want), 2 different driver packs and the aforementioned recovery manager.
Click to expand...
Click to collapse
Thank you! Im trying recovery manager as I type this, I find it curious it says "Currently installed recovery: unrecognized"
As for the driver, I already had it installed from when I rooted the phone.
EDIT: So I installed the up to date recovery (recovery-clockwork-5.0.2.8-u8160) with Recovery Manager, still unrecognized and still freezes after booting into recovery.
Installed the one you supplied (ClockworkMod-u8160-v0.1) and got the exact same results, unrecognized and freeze
Codeman666 said:
Thank you! Im trying recovery manager as I type this, I find it curious it says "Currently installed recovery: unrecognized"
As for the driver, I already had it installed from when I rooted the phone.
EDIT: So I installed the up to date recovery (recovery-clockwork-5.0.2.8-u8160) with Recovery Manager, still unrecognized and still freezes after booting into recovery.
Installed the one you supplied (ClockworkMod-u8160-v0.1) and got the exact same results, unrecognized and freeze
Click to expand...
Click to collapse
In that case you might want to try the doomsday option - fastboot (not really,hell - it's actually rather useful + if you follow that website you also get adb up and working too). As for the 'unrecognized' alert,I remember getting it too once upon a time,but I have to admit - I haven't used the app myself since when I made the jump from the stock 2.2.1 ROM to a custom froyo build,so I can't recall for the moment what I did to fix that error
bk109 said:
In that case you might want to try the doomsday option - fastboot (not really,hell - it's actually rather useful + if you follow that website you also get adb up and working too). As for the 'unrecognized' alert,I remember getting it too once upon a time,but I have to admit - I haven't used the app myself since when I made the jump from the stock 2.2.1 ROM to a custom froyo build,so I can't recall for the moment what I did to fix that error
Click to expand...
Click to collapse
Will do. Besides the fastboot recovery command what else do I need to do from the phone side?
Does fastboot display any feedback or log about the flashing/installation?
Codeman666 said:
Will do. Besides the fastboot recovery command what else do I need to do from the phone side?
Does fastboot display any feedback or log about the flashing/installation?
Click to expand...
Click to collapse
Nothing specific -you just have to reboot in fastboot mode (just restart the phone while pressing Power and Volume Down. Windows should chirp and install the drivers automagically - afterwards just use that command discussed earlier and it should flash your recovery without any additional prompts (it should only print out a confirmation of a successful flash) and you should have the CWM ready to go
Edit: I put my device into fastboot mode on a clean Windows install (a Win8 Consumer Preview) and it did autodetect and install the relevant driver without restarting itself
No luck... Now it's driver issues
When booting the phone with either the vol up or down pressed and pluging in the USB my PC isn't recognizing the driver, I used both drivers you sent me.
Initially it's detected as Android 1.0 device, upon fetching the drivers it gets named "Android Sooner Single ADB Interface".
As I refresh device manager it goes back to Android 1.0 with an exclamation mark.
I think it's a driver signature issue, I'll try again in a couple of hours in a different PC
edit:in debug mode I have no driver issues and I can even detect my phone with ADB
Finally!
Tried it in another computer, auto downloaded some ASUS adb driver and installed fine.
Flashed latest CWM recovery with fastboot and now I'm able to boot into CWM!
Thank you so much for your help!
Sry for bumping.
So, i had the same trouble with the drivers. But i just downloaded HiSuite directly from the Huawei Site and these fix my problem with drivers to use adb without troubles . Hope this help someone.
BTW, Thanks bk109!
It did helped me thx man
Sent from my U8180 using xda app-developers app
Hi,
I have been trying to flash CWM recovery using every possible means. I have tried MTK Uncle tool and have even tried SP Tool. both process completes and gives success report but when i restart the phone by pressing Vol UP button it enters into Factory Mode not recovery.
Reason i want to install CWM recovery is to get the phone nandroid backup and install some old ROM as the ROM which i have is 4.1.9 and has so many bugs in it. even it cant sync my google contacts and calender.
Please guide me why my phone is not getting recovery installed even after completing the whole process without any error and get OK report at the end as well but when first time it is asked to reboot into recovery it gives a blank screen and when we do that again after replacing the battery it enters into factory mode.
Details of Phone are
BB Chip : MT6575
MS Board : GT-i9300
Modem Ver: MAUI.11AMD.W11.50.SP.V20 2012/11/09 09:33
Built Time : 2013 / 02 / 18
UBoot Ver : 2010.06
Kernel Ver: 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #2 PREEMPT Tue Feb 19 09:27:09 CST 2013
Android Ver: 4.1.9
SW Ver: ALPS.ICS.MP.V2.6
Custom built Verno. : 1361175260
I say again i want to downgrade to some old version like 4.0.4 which has least number of bugs.
Thanx
rajafawadhameed said:
when i restart the phone by pressing Vol UP button it enters into Factory Mode not recovery.
Click to expand...
Click to collapse
Have you tried volumee down? Or maybe use rommanager to reboot in recovery?
pokexpert said:
Have you tried volumee down? Or maybe use rommanager to reboot in recovery?
Click to expand...
Click to collapse
Yes i have tried both. Rom Manager reboots me into a blank screen from which i have to come out by removing battery and by pressing volume down button it again gives me blank screen
This maybe happening due to the recovery not supporting your device. I have seen this issue around mainly with knock off/clone devices. As for bugs well even down grading may not fix the bugs.
That black screen is RECOVERY MODE
download recovery manager from play store and flash recovery.img
110% works on every device
Then try to reboot to recovery by same app or by rom manager.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
zelendel said:
This maybe happening due to the recovery not supporting your device. I have seen this issue around mainly with knock off/clone devices. As for bugs well even down grading may not fix the bugs.
Click to expand...
Click to collapse
Actually rest all is fine and the only bug is that i cant sync my google contact with this rom... my one friend and old model with 4.0.4 rom and it works fine thats why wanna try that
Moonguy75 said:
That black screen is RECOVERY MODE
download recovery manager from play store and flash recovery.img
110% works on every device
Then try to reboot to recovery by same app or by rom manager.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Tried recovery manager... on first installation it showed no recovery installed i tapped on flash CWM recovery a popup appeared displaying downloading recovery... but it remains on 0% and suddenly it vanished at 0% and a black popup appear saying recovery flashed but still not visible in recovery colomn... and even if i do reboot into recovery mode same blank screen with nothing visible and if i restart by removing batter and open recovery manager it again says no recovery installed
What about preloader.... if i flash some other preloader but offcourse compatible to my model will that make any difference ?
Download the apk below.
http://db.tt/C7rlqTu1
1.Click on recovery in app menu.
2.There click on install recovery.
wait for some time, while app search for all .img files on your sd card.
3.Then click on recovery image you want to install.
4.Let app install recovery when installing comes and then message will come
"current recovery: unrecognised"
5.Now click on reboot into recovery in app.
And you will be in recovery after some time.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Moonguy75 said:
Download the apk below.
http://db.tt/C7rlqTu1
1.Click on recovery in app menu.
2.There click on install recovery.
wait for some time, while app search for all .img files on your sd card.
3.Then click on recovery image you want to install.
4.Let app install recovery when installing comes and then message will come
"current recovery: unrecognised"
5.Now click on reboot into recovery in app.
And you will be in recovery after some time.
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Downloaded the app that you referred. installed that but its not running every time i tap on it, error appear like unfortunately recovery manager has stopped. i checked it on both while installing it on internal storage and external both sorry that i am bothering you so much. I have been using android for last 7 years now have used HTC Hero, HTC Desire, HTC HD2, HTC EVO 3D, Samsung Galaxy S3 original.... have rooted them all recovery installed custom roms, kernels and everything i have done... but this one has really made me helpless
OK last but not the least long but 100% working method is by doing through ADT android download tool
1) place recovery.img in your pc
2)install ADT
3)install all usb drivers of ur device
4)connect USB in download mode or in bootloader or while pressing the call key(press the key when u connect phone to pc while using flashtool)
LET THE PC INSTALL ALL ADB DRIVERS ETC...
5)open ADT in arm11 browse recovery.OMG
6) in erase tick ONLY RECOVERY
7) BEGAIN
8) WAIT FOR SECONDS IT WILL BE DONE.......
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Moonguy75 said:
OK last but not the least long but 100% working method is by doing through ADT android download tool
1) place recovery.img in your pc
2)install ADT
3)install all usb drivers of ur device
4)connect USB in download mode or in bootloader or while pressing the call key(press the key when u connect phone to pc while using flashtool)
LET THE PC INSTALL ALL ADB DRIVERS ETC...
5)open ADT in arm11 browse recovery.OMG
6) in erase tick ONLY RECOVERY
7) BEGAIN
8) WAIT FOR SECONDS IT WILL BE DONE.......
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Presently i have two type of drivers installed on my pc
1. when i plug in the phone in normal mode it detect it as MTK65xx Android phone drivers are installed
2. When i plug it in when completely switched off for use in SP Tool mode it has drivers USB V com installed
3. When i try to get into recovery and switch it on while pressing vol up button it gets into a blank screen when i plug it in in that mode it is detected again as MTK65xx android phone but i dont have any drivers for that.
is this mode mentioned in number 3 is bootloader or download mode ? and where can i find its drivers as i googled it but coudnt find anything on that
kindly also tell me some good and stable link for ADT
Link download...
http://www.mediafire.com/?d0edy5sx9e6ote8
Try in whatever mode in which it is successful in flashing with ADT..
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Moonguy75 said:
Link download...
http://www.mediafire.com/?d0edy5sx9e6ote8
Try in whatever mode in which it is successful in flashing with ADT..
"NEVER CALL YOURSELF NOOB BE A NEWBIE"
PM me if u need help
Sent from MOON......
Click to expand...
Click to collapse
Tried that as well... in all three modes but its just not working... process starts and then ends with status as fail.... i guess this cell is simply in no mood to get flashed with a new recovery thanx alot for your so much help
I have the same problem. please help I don't wanna lose hope
I Cant even find the suitable recovery img for my phone. Please if you can help it would amazing ans thanks so much
[/B][/B]
rajafawadhameed said:
Tried that as well... in all three modes but its just not working... process starts and then ends with status as fail.... i guess this cell is simply in no mood to get flashed with a new recovery thanx alot for your so much help
Click to expand...
Click to collapse
I own the same phone and have tried installing CWM on it through all possible ways! I think that newer phones with MT6575 no longer work with the Recovery img that we have been trying.
try this
i m using one...
on the black screen it seems stuck.. but press the home button u would get the recovery screen...enjoy
Hai there...
This is Rahul S Nair talking in behalf of Samsung Galaxy Grand Quattro development (qualcomm blooded device).. I m a dev working for this device for creating a cwm... I successfully found a suitable method to root it formely.. But when we reached to cwm level we found that the device is not at all taking custom recoveries .. even a moded stock recovery is not being showing up.. whenever custom recovery flashes it ll give a black screen and reboot... after a long investigation we figured that this device have a locked bootloader.. Is it possible for you to unlock this guy....
Sent from my GT-I8552 using XDA Premium 4 mobile app
Insufficient storage !!
Hey guys !! I need help quick .. I bought the same phone Samsung galaxy s3 (mt6575) the copy .. i tried every thing i rooted it but when i flash a rom from sp tools it says insufficient space on device , and ADT ends up with starting and direct to "Fail" i don't know why ? i searched the whole xda forum nobody else got this problem .. Please help me .. PM me or anything
Following up a guide to install CWM, I bricked my Huawei G610. It is on bootloop now. No Fastboot access too.
Any hardware key combination to re-install stock firmware including Recovery?
I recall few phones had a process to put ROM on SDcard and with special hardware key combinations, it used to re-flash fron SDcard.
Help will be appreciated.
sadnblueish said:
Following up a guide to install CWM, I bricked my Huawei G610. It is on bootloop now. No Fastboot access too.
Any hardware key combination to re-install stock firmware including Recovery?
I recall few phones had a process to put ROM on SDcard and with special hardware key combinations, it used to re-flash fron SDcard.
Help will be appreciated.
Click to expand...
Click to collapse
Check on need Rom G610 U20, Download ROM, unzip, theres a doc. file guide attached how to install..
Joe_Live said:
Check on need Rom G610 U20, Download ROM, unzip, theres a doc. file guide attached how to install..
Click to expand...
Click to collapse
Already followed that but it doesn't go to upgrade mode. Tried 2 SDcards so shouldn't be a bad SDcard issue.
If I plug the computer with Laptop, it detects phone but phone keeps rebooting hence I can't control the phone through SP Flash or ADB or other tools. Even in Fastboot mode, it restarts.
Same issue here
Any Luck with your device?
stuck in Bootloop
I faced the same problem after trying to flash TWRP recovery img. I used MobileUncle Tools to flash it. It asked Reboot in recovery, I pressed OK. and it never ran into recovery mode. Its stuck in bootloop now. Any way out? Have tried through ADB but fastboot doesn't work...
My problem was solved by Huawei. I claimed my warranty!
To solve this issue use sp flash tool without batry
Sent from my HUAWEI G610-U20 using Tapatalk
Help
thesumanthapa said:
I faced the same problem after trying to flash TWRP recovery img. I used MobileUncle Tools to flash it. It asked Reboot in recovery, I pressed OK. and it never ran into recovery mode. Its stuck in bootloop now. Any way out? Have tried through ADB but fastboot doesn't work...
Click to expand...
Click to collapse
I have encountered the same problem Is there any solution
sadnblueish said:
Already followed that but it doesn't go to upgrade mode. Tried 2 SDcards so shouldn't be a bad SDcard issue.
If I plug the computer with Laptop, it detects phone but phone keeps rebooting hence I can't control the phone through SP Flash or ADB or other tools. Even in Fastboot mode, it restarts.
Click to expand...
Click to collapse
hi I got the same problem today. can you tell me how did you resolve your issue long time ago.
thanks
Abbas
mobdanish said:
hi I got the same problem today. can you tell me how did you resolve your issue long time ago.
thanks
Abbas
Click to expand...
Click to collapse
Over 2 years now and I probably have changed 4 phones. Don't remember. But to help you. you may try this:
http://forum.gsmhosting.com/vbb/f810/huawei-g610-u20-bootloop-problem-1776731/
my phone isn't working, every time i open my phone it says "unfortunately, dev stopped working". and there are too many viruses that keeps on downloading. any idea how to fix this? huawei-g610-U20
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (master✱)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
i have updated my phone moto e to android L OTA manually and since then it worked really well but only few bugs were there .
later again i saw a 13mb file of bugs fix manually update which i have downloaded and installed in my phone which got bricked and this occurred :
My phone shows only one Motorola M logo image and while connecting to charger it shows only this image
Help me out to work my mobile as before it use to be !!
can any one help regarding this problem.
Srinivas0009 said:
i have updated my phone moto e to android L OTA manually and since then it worked really well but only few bugs were there .
later again i saw a 13mb file of bugs fix manually update which i have downloaded and installed in my phone which got bricked and this occurred :
My phone shows only one Motorola M logo image and while connecting to charger it shows only this image
Help me out to work my mobile as before it use to be !!
can any one help regarding this problem.
Click to expand...
Click to collapse
its because u have charger connected..take it out and boot up..
-Adarsh- said:
its because u have charger connected..take it out and boot up..
Click to expand...
Click to collapse
sorry but i couldnt start my phone !!! it shows me motorola M logo and doesnt go forward from it
Srinivas0009 said:
sorry but i couldnt start my phone !!! it shows me motorola M logo and doesnt go forward from it
Click to expand...
Click to collapse
Hard reset
Sent from my XT1022 using XDA Premium mobile app
Soft Brick
That's only a soft brick, the good thing is it turns on, if it was a hard brick you would have to do a blankflash of the bootloader, which as the device has only just been released it won't be available. Just a few things, because this is only a soft brick you may be able to sort it out. Be careful, when you're doing an OTA update be sure to have the stock recovery because if you have a custom recovery such as TWRP or CWM it won't install the update that's why when you have an OTA update it's best to flash the stock recovery so that it will be able to install Motorola's OTA update. If you haven't got the stock recovery img flashed on your device then you will need to. Download the stock recovery img, you can do it on one of the Moto Tool's that's floating around. Then enter your bootloader, fastboot mode by powering off the device and holding POWER + Volume down buttons together but don't let go until you see your bootloader. Make sure you have ADB and Fastboot drivers installed on your PC, download the recovery img for your device (stock one) save it to your desktop and then do the following. Locate your ADB and Fastboot driver folder and then open a command prompt window in your folder and type to following, without the apostrophes, 'fastboot devices' and if you see your device you're connected ready to flash. After that, type 'fastboot flash recovery recovery.img' and it will flash the stock recovery partition for your device. When you have done that you can boot into recovery, scroll with your volume buttons until you see 'recovery' click on it and you will see 'Wipe Factory' click that and it will revert your phone back to stock! Hopefully then your problem should be fixed, if not then you will need to wait for the Factory Images, or I think you are able to download them off Motorola's website, if not then you'll have to wait! Just remember in future to always make a backup of your current firmware, then if something like this does go wrong you always have something to fall back on if your device does get bricked!
Hope this helped you