Major credits again to @zachariahpope for the Lollipop build earlier tonight. Unfortunately getting it rooted from stock won't work. Which is why I proceeded to try the same method from my rooting guide to attempt root. And I am proud to say...I HAVE THE ROOTED LOLLIPOP SONY XPERIA Z3V!!!
And also, I have recovery as well.
If you're going to follow in the same footsteps, please PLEASE remember when you get the supersu file, grab the v2.49 as that is for LOLLIPOP.
@GigaSPX Make one of these in the development section too!!
well, looks like its time to flash
I thought this day would never come!!
Sent from my D6708 using Tapatalk
where is it? can I just root the phone when I Flash it back to stock root from there and not take the OTA and go straight to the pre-root for Lolipop?
GhostTrunks said:
where is it? can I just root the phone when I Flash it back to stock root from there and not take the OTA and go straight to the pre-root for Lolipop?
Click to expand...
Click to collapse
If you want root, you need to preroot. Otherwise, you won't have it at all.
Also this is an update: it seems it's still Verizon holding all of us by the edge about VoLTE. I tried activating it but it won't work. Still can't browse and call at the same time dammit.
Is this patched for Stagefright?
rooted lollipop for z3v ,,,,,,,,,, congrats
1linuxfreak said:
Is this patched for Stagefright?
Click to expand...
Click to collapse
Unfortunately... no.
GigaSPX said:
Unfortunately... no.
Click to expand...
Click to collapse
Giga, any success in actually using Advanced Calling? I can't seem to get it to work, even after "activating" it on the phone
srsaloom said:
Giga, any success in actually using Advanced Calling? I can't seem to get it to work, even after "activating" it on the phone
Click to expand...
Click to collapse
No, that's what I've been trying to tell a lot of people now. It's still all in the hands of the big red...
srsaloom said:
Giga, any success in actually using Advanced Calling? I can't seem to get it to work, even after "activating" it on the phone
Click to expand...
Click to collapse
You must also activate it from your vzw account.
GigaSPX said:
No, that's what I've been trying to tell a lot of people now. It's still all in the hands of the big red...
Click to expand...
Click to collapse
Figured so, just wasn't sure if I'd missed a memo somewhere along the way. Appreciate it!
Delebird said:
You must also activate it from your vzw account.
Click to expand...
Click to collapse
srsaloom said:
Figured so, just wasn't sure if I'd missed a memo somewhere along the way. Appreciate it!
Click to expand...
Click to collapse
Yeah, and can't activate it on the Verizon account when it won't let you to.
Has anyone tried installing Xposed? I can't flash to install.
GigaSPX said:
Has anyone tried installing Xposed? I can't flash to install.
Click to expand...
Click to collapse
Just installed it. v74-sdk21-arm . Gave me a little scare, as it hung on the Sony logo after rebooting. Also, upon that initial reboot, the lockscreen was vacant and couldn't get beyond what should've been there. Had to long-press power to bring up power menu and select reboot.
Following that, things seem to be working fine. Xposed Installer crashes if you click on xda support links in module pages, and the installation of xposed modules from within the Xposed installer can take significantly longer than it did on KK.
GigaSPX said:
No, that's what I've been trying to tell a lot of people now. It's still all in the hands of the big red...
Click to expand...
Click to collapse
Not sure if this helps, but, I jumped from this phone to the LG G4. We don't have much development but, some rooted users don't have advanced calling because they are rooted. I am a non-rooted user with advance calling. To add another variable to the equation, you have to have the My Verizon Mobile app installed and not disabled to at least initiate advanced calling. Some of the rooted users I think figured that out.
srsaloom said:
Just installed it. v74-sdk21-arm . Gave me a little scare, as it hung on the Sony logo after rebooting. Also, upon that initial reboot, the lockscreen was vacant and couldn't get beyond what should've been there. Had to long-press power to bring up power menu and select reboot.
Following that, things seem to be working fine. Xposed Installer crashes if you click on xda support links in module pages, and the installation of xposed modules from within the Xposed installer can take significantly longer than it did on KK.
Click to expand...
Click to collapse
Big thanks here. Fully updated now, and with this tip I'm running xposed as well.
Uninstalled old xposed first (may not have been necessary)
TWRP dirty flashed pre-rooted 5.0.2 zip from post 44 of that lollipop dev thread
After boot TWRP isntalled v74-sdk21-arm module
Installed xposed_installer.apk and added back my most used modules
-chromepie
-xtether (still working )
Didn't bother with xperiaxposed, not even sure if it's updated. Never really used it
Also, I like this boot animation, not that it's of any importance http://forum.xda-developers.com/z3/themes-apps/bootanimation-xperia-z3-t3079263
darker_slayer said:
Big thanks here. Fully updated now, and with this tip I'm running xposed as well.
Uninstalled old xposed first (may not have been necessary)
TWRP dirty flashed pre-rooted 5.0.2 zip from post 44 of that lollipop dev thread
After boot TWRP isntalled v74-sdk21-arm module
Installed xposed_installer.apk and added back my most used modules
-chromepie
-xtether (still working )
Didn't bother with xperiaxposed, not even sure if it's updated. Never really used it
Also, I like this boot animation, not that it's of any importance http://forum.xda-developers.com/z3/themes-apps/bootanimation-xperia-z3-t3079263
Click to expand...
Click to collapse
I did much the same but I did not uninstall xposed before I flashed and it wouldnt let me uninstall it after I upgraded to lollipop. But I flashed and installed the files above and it works great. Xperia Xposed works use v1.7 cause it's the only one that works.
Just wish there was a foolproof way to get rid of those useless small apps
darker_slayer said:
Just wish there was a foolproof way to get rid of those useless small apps
Click to expand...
Click to collapse
They're super useful to me, being all multitasking useful and all. loll
Related
Sprint Moto X [XT1056] Stock ROMS
By using any of these you agree that I am not responsible for ANYTHING that can or may happen to your phone
Click to expand...
Click to collapse
Like this guy said:
iKrYpToNiTe said:
Word to the wise if you don't know how to use RSDLite or Fastboot to restore your phone then leave this thread now please!
Click to expand...
Click to collapse
-----------------------------------------------------------------
KIT KAT 4.4.4
System Version: 212.44.28
Software update 08/2014
Code:
[B]DETAILED ENHANCEMENTS:[/B]
Android™ 4.4.4, KitKat® - Android 4.4.4, KitKat, is the latest release of the Android platform. This release includes several stability, framework and security fixes in addition to accuracy improvements to the power profile.
Camera - Improved image quality - Improved camera image quality including better consistency of exposure, more realistic flash coloring, improved photos in low light conditions using front camera.
Camera - Pause video recording - Added the ability to pause video recording with a convenient pause/resume button on the viewfinder.
Updated Phone dialer - Updated Phone dialer with a new graphical layout and colors to improve consistency and usability.
Motorola Alert application - New Motorola Alert application sends periodic alerts with your location to your selected contacts. Now available for download from the Google Play Store.
ROM LINK
212.44.28
md5: d1fb4c2259855abf74dfadbad5ccdbc2
FIRMWARE LINK
LINK
-----------------------------------------------------------------
BIG thanks to:
iKrYpToNiTe
chad.goodman
NineInchNails
Rizal Lovins
ibanez7
motofirmware.center
JustCMH
HOT-SPOT UNLOCK:
iKrYpToNiTe said:
All you have to do is add net.tethering.noprovisioning=true to your build.prop file and then you can remove or freeze the entitlement check app if you want to. Sprint model requires ro.mot.tether_dun_required to change from 1 to 0.
For people who don't want to mess with modifying their build.prop file or use xposed. I made an app which requires Root, that will run a setprop command to bypass the check until you reboot. If you want it to last after a reboot you can select apply of boot to run the command after every reboot. This was tested and confirmed by cvhovey thanks to him for testing it for me, since I have free tethering. This is my first app so I hope you Enjoy it! I want to say thanks to jcase's slapmymoto and the developer of adaway, I used their github sources as references when I couldn't get something working. Also androidicons for the icon template, and Poliva for setpropex, and jduck for getting setpropex working on KitKat.
Download Links
v1.2 http://www.androidfilehost.com/?fid=23501681358557764(v1.2 is signed with a different key than v1.0/v1.1 so it will display a msg box telling you this just click okay)
Click to expand...
Click to collapse
RECOVERY LINKS
CWM Advanced Edition- PhilZ Touch
TWRP
SUPERUSER LINKS
SuperSU
CWM Superuser (Koush)
DID YOU MAKE AN EXPENSIVE BRICK?
[HOW-TO] Resurrecting A Bricked Moto X
FEW WAYS TO GET BACK TO STOCK
Easy Guide to Restore Stock Firmware on Moto X using RSD Lite
Moto X Toolkit v1.4.3 [Backup/Restore,Drivers,Return to stock,Root,Bootani]
Script FlashFirmware (simple and safe method to flash firmware)
Getting a moto x back to stock on mac os x
BAD BATTERY DRAIN LATELY? TRY THIS
hardware reset of the processor and terminates all running commands
LEAVING THIS HERE IN CASE I FORGET HOW TO TAKE A DUMP
Code:
[B]dd if=/dev/block/platform/msm_sdcc.1/by-name/system of=/sdcard/System.img.ext4
dd if=/dev/block/platform/msm_sdcc.1/by-name/boot of=/sdcard/Boot.img[/B]
Thanks for this! Thanks soo much for the hard work!
FINALLY! The first rom for the Sprint variant :').... I Love you! haha.
They are both up. md5's should be posted right, they were manually entered. I'm carving pumpkins with the boys, so........hopefully all is good. If not, let me know and I'll attack it when able to.
AbstractXart said:
FINALLY! The first rom for the Sprint variant :').... I Love you! haha.
Click to expand...
Click to collapse
pfft, and mine was what?
looks good gokart
shabbypenguin said:
pfft, and mine was what?
looks good gokart
Click to expand...
Click to collapse
Just trying to get things going...lol. Didn't see anything for Sprint ver, must have missed yours? BTW....I seen a shabby looking penguin on a program to turn system.img into system files in the kithcen......is that you?
gokart2 said:
Just trying to get things going...lol. Didn't see anything for Sprint ver, must have missed yours? BTW....I seen a shabby looking penguin on a program to turn system.img into system files in the kithcen......is that you?
Click to expand...
Click to collapse
nah, the last big script i did for people was teh first nexus toolkit, nowadays i hop around trying to help out unloved devices (hence teh name of the team i made Official Unloved Devices Hit Squad ). people needed this anyways, my stock rom was based on the pre-ota camera fix apparently. i had considered getting this phone on republic wireless so i wanted to scope out how development was coming, saw nothing was going on and figured id help out .
shabbypenguin said:
pfft, and mine was what?
looks good gokart
Click to expand...
Click to collapse
Wha?! I never saw it Shabby. My bad, let me rephrase,
FINALLY! The second rom for the Sprint variant :').... I Love you! haha.
Hey guys, I just wanted to update and say it won't boot on the Verizon dev edition like the T-mobile rom will. It freezes for me on the Moto Earth boot animation. Noo! Well darn, I was wanting to try the sprint rom to see if I could get google wallet tap to pay working on my vzw dev phone since no one has figured out how to make tap to pay work on the non-sprint variants.
I booted the deodex version just fine on my vzw Dev edition. I wiped my data and wiped cached before flashing. I didn't try g wallet
Sent from my XT1060 using xda app-developers app
skiwong20 said:
I booted the deodex version just fine on my vzw Dev edition. I wiped my data and wiped cached before flashing. I didn't try g wallet
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
YES!!!! It worked!!! LOL. Anyway, have you/anyone noticed anything when trying to alter the stock boot.img? Seems like anything I tried (not a whole bunch really) with the kernel/boot.img made it non-bootable? Pretty much if it hits the bootloader unlocked screen and doesn't vibrate.....its a no go? Wondering if theres some type of checksum for the boot.img? Not too sure about wallet ATM. Don't really use it, and this is based off the OTA so....I'd assume it should be fine? I remember some stuff way back on this, may have to step back and see if there's something to utilize. This isn't my first rodeo.....but it's the first one I've entered.:laugh:
gokart2 said:
YES!!!! It worked!!! LOL. Anyway, have you/anyone noticed anything when trying to alter the stock boot.img? Seems like anything I tried (not a whole bunch really) with the kernel/boot.img made it non-bootable? Pretty much if it hits the bootloader unlocked screen and doesn't vibrate.....its a no go? Wondering if theres some type of checksum for the boot.img? Not too sure about wallet ATM. Don't really use it, and this is based off the OTA so....I'd assume it should be fine? I remember some stuff way back on this, may have to step back and see if there's something to utilize. This isn't my first rodeo.....but it's the first one I've entered.:laugh:
Click to expand...
Click to collapse
what command are you using to pack the boot.img?
skiwong20 said:
I booted the deodex version just fine on my vzw Dev edition. I wiped my data and wiped cached before flashing. I didn't try g wallet
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
Yeah I wipe three times before flashing and I wiped cache and dalvik again before booting. I wonder what the issue is. I downloaded the odex and not deodex but I don't see it being the difference between booting and freezing. Hmm. I'm back on the T-Mobile rom now. I'll have to try again with the deodex tomorrow
shabbypenguin said:
what command are you using to pack the boot.img?
Click to expand...
Click to collapse
Was just using the kitchen tool. Anytime I touched the boot.img it wouldn't boot up..... Or it would not vibrate at the splash screen, boot up, but not "see" user touches on the screen. Acted like the digitizer was totally off. Something I noticed is if it vibrates at the splash, it was good. No vibrate, definitely something would be wrong. Going to take my time with it next week.
jimmypop13 said:
Yeah I wipe three times before flashing and I wiped cache and dalvik again before booting. I wonder what the issue is. I downloaded the odex and not deodex but I don't see it being the difference between booting and freezing. Hmm. I'm back on the T-Mobile rom now. I'll have to try again with the deodex tomorrow
Click to expand...
Click to collapse
I recommend wiping system and data too and trying. Just make a backup first. And/or try using your normal boot.img instead of the one in the zip.
gokart2 said:
Was just using the kitchen tool. Anytime I touched the boot.img it wouldn't boot up..... Or it would not vibrate at the splash screen, boot up, but not "see" user touches on the screen. Acted like the digitizer was totally off. Something I noticed is if it vibrates at the splash, it was good. No vibrate, definitely something would be wrong. Going to take my time with it next week.
Click to expand...
Click to collapse
i take it then you arent packing the Device tree file to the boot.img.
http://pastebin.com/tSGxTmYq save this script, run it against stock boot.img. youll get a DTB.img, extract your boot.img, edit what you want in ramdisk or swap zimages. then use a modified mkbootimg to include the dtb file as part of it all
gokart2 said:
Was just using the kitchen tool. Anytime I touched the boot.img it wouldn't boot up..... Or it would not vibrate at the splash screen, boot up, but not "see" user touches on the screen. Acted like the digitizer was totally off. Something I noticed is if it vibrates at the splash, it was good. No vibrate, definitely something would be wrong. Going to take my time with it next week.
I recommend wiping system and data too and trying. Just make a backup first. And/or try using your normal boot.img instead of the one in the zip.
Click to expand...
Click to collapse
I got the sprint deodex rom booting on my vzw dev edition doing like you said. But sadly I found google wallet would not work. It just sat saying "finishing up a few things." So I guess unfortunately there is a hardware issue preventing wallet from working on the non-sprint variants. That sucks!!!
I don't understand why but I noticed between the t-mobile, verizon, and sprint roms that the signal bars are slightly different on every one. Sprint's seems to be stretched out a little more and have an extra bar or two. I hate all of them though because the grey has some funky white lines through it where the separations are instead of being solid grey. I don't know what was wrong with the stock android signal bars that none of the carriers wanted them
I have a question regarding safestrap, can I use it to unlock my bootloader and just flash this to my nand? I dont want to waste my space on rom slots :\
d4mi3n said:
I have a question regarding safestrap, can I use it to unlock my bootloader and just flash this to my nand? I dont want to waste my space on rom slots :\
Click to expand...
Click to collapse
Honestly have no clue about SS. I would have to say no. No sure what needs to be done for it to be SS flashable.
Added 4.4 links. Thank abiezer for letting me link to his deodex 4.4 build HERE!
I plan on adding the SPRINT specific firmwares, and more in due time.
It looks like there's a minor update available for the VZW LG G2, VS98025B. I just got the OTA notification on my phone.
http://www.verizonwireless.com/support/devices/knowledge_base_plain.html/98886
Ditto here, just finished the update.
getting error 0x1117008 after the update fails. Only rooted but otherwise still on stock. Any other option than doing a full restore?
hooligan5 said:
getting error 0x1117008 after the update fails.
Click to expand...
Click to collapse
I'm getting Error: 0x1111004. My phone is not even rooted or anything, sigh dumb verizon. My phone has been crashy ever since the first 4.4.2 update.
Factory reset didnt do sh!t, same error.
Anyone with root and/or custom recovery about to confirm if this will or will not break it?
gunit25 said:
Anyone with root and/or custom recovery about to confirm if this will or will not break it?
Click to expand...
Click to collapse
Stock with root (no custom recovery) updated without any issues, maintained root.
Rugenstat said:
Stock with root (no custom recovery) updated without any issues, maintained root.
Click to expand...
Click to collapse
I can confirm the same results on my rooted G2 as well.
What about the hacked mobile hotspot app? Change log mentions there's an updated hotspot app.
detonation said:
What about the hacked mobile hotspot app? Change log mentions there's an updated hotspot app.
Click to expand...
Click to collapse
Also the question I have VoLTE not worth losing Mobile hotspot.
I have 24A version.
Who could be upgrade via VZW Software Upgrade assist program on PC?
Actually i'm business trip on Japan. When I tried software update, I won't update by "This phone is already up to date" popup.
Also seems FOTA not support outside US
[Picture Link]
https://www.dropbox.com/s/n8c5txp6rizb8jb/vzw_24a.jpg?dl=0
*Update #1
I could be found 25B kdz file is not uploaded on LG CSMG server. Still 24A binary exist here.
http://csmg.lgmobile.com:9002/csmg/b2c/client/web_model_list.jsp?country=US
<model>LGVS980</model>
<swversion>VS98024A_11</swversion>
<buyer>VRZ</buyer>
Wait a 25B stock KDZ upload on CSMG server!!
I took the VS98025B update from a Stock VS98024A Rooted G2. I have SuperSU with survival mode checked. I kept root, and was able to make the hotspot work by pulling the modded hotspotprovision.apk and it's odex file from a 25A rom that had it modded.
Update: The hotspot mod has been posted in this thread. http://forum.xda-developers.com/showpost.php?p=55403859&postcount=300
Vexorg said:
I'm getting Error: 0x1111004. My phone is not even rooted or anything, sigh dumb verizon. My phone has been crashy ever since the first 4.4.2 update.
Factory reset didnt do sh!t, same error.
Click to expand...
Click to collapse
I'm getting the same error.
I thought it was my xposed mods, but after removing all of them it still gives me the same error. I'm just running stock rooted.
Woops
---------- Post added at 06:13 PM ---------- Previous post was at 06:12 PM ----------
ArcSyn said:
I'm getting the same error.
I thought it was my xposed mods, but after removing all of them it still gives me the same error. I'm just running stock rooted.
Click to expand...
Click to collapse
I never rooted or anything. I sent a help email to LG they said send the phone in. I was thinking about flashing to stock and trying to start over. Not even sure if it would help. Basically I think I have to root my phone to fix it lol, stupid.
Getting 0x1117008 error when I try to update, I don't think I've uninstalled any bloat, as far as I know the only things are xposed and root.. Just uninstalled xposed.. Still errors. Any ideas? I don't think there are any disabled apps
chucknorris101 said:
Getting 0x1117008 error when I try to update, I don't think I've uninstalled any bloat, as far as I know the only things are xposed and root.. Just uninstalled xposed.. Still errors. Any ideas? I don't think there are any disabled apps
Click to expand...
Click to collapse
Make sure to open Xposed and remove the framework. I pretty sure just uninstalling the app won't remove the files.
toopty said:
Make sure to open Xposed and remove the framework. I pretty sure just uninstalling the app won't remove the files.
Click to expand...
Click to collapse
Sorry I wasn't more clear, that is what I did, and reboot, but left the xposed app and wake lock terminator installed..
Not sure what might be missing
toopty said:
I took the VS98025B update from a Stock VS98024A Rooted G2. I have SuperSU with survival mode checked. I kept root, and was able to make the hotspot work by pulling the modded hotspotprovision.apk and it's odex file from a 25A rom that had it modded.
Update: The hotspot mod has been posted in this thread. http://forum.xda-developers.com/showpost.php?p=55403859&postcount=300
Click to expand...
Click to collapse
Does it a have ART under the "Select runtime" option in Developer options?
Sent from my XDABBEB VS98025A v2.0.0 with ART using XDA free mobile app
z3pp3lin said:
Does it a have ART under the "Select runtime" option in Developer options?
Sent from my XDABBEB VS98025A v2.0.0 with ART using XDA free mobile app
Click to expand...
Click to collapse
No it doesn't. I believe that is specific to the rom you a running.
toopty said:
No it doesn't. I believe that is specific to the rom you a running.
Click to expand...
Click to collapse
I figured that but just wanted to make sure. Thanks
Sent from my VS980 4G using XDA Free mobile app
Has anyone successfully upgraded using the vzw pc software? I get an error trying to install OTA. I must have uninstalled some bloat that Verizon considered crucial to have.
I just received a Android update in my notification menu. I am rooted and running a custom recovery (twrp). I know I cannot accept the update but I can't swipe it away. Anyone know how I can get the update removed from my notification menu?
Have you tried long pressing on the notification and disabling notifications?
I froze system update in ti backup I didn't have a pending update but I would try that
Is that file under. Com in tb?
jreink01 said:
Is that file under. Com in tb?
Click to expand...
Click to collapse
Here you go
kennwoodkenn said:
Here you go
Click to expand...
Click to collapse
Thanks for the thumbnail. I did find it in TB and froze it but I'm still getting the update notification in my notification pull down.
Did you restart the phone after
that may work
Don't know if this will work or not, but on the Galaxy S3 the way to stop getting nagged about an OTA was to edit build.prop and replace all references to the old ROM with the new one. So you could try making a backup of build.prop, then edit all references to ZV4 and change them to ZV6. Save the file, make sure permissions are set to rw-, r--, r-- (0644), and reboot.
I would strongly suggest making a nandroid backup first.
Here's how I have been doing it:
1. Download Autorun Manager
2. In settings under advanced enable view services
3. Go to Google Services Framework and disable update...see below.
At your own risk if you decide to try it, of course.
Sent from my LGLS990 using XDA Free mobile app
This is the recommended way. http://forum.xda-developers.com/showthread.php?p=57182591
If the update has already downloaded. Disabling the OTA still wont get rid the the notification. Easy way to get rid of it is long press it and go to app info. This will take you to Google Play Services. Simply uncheck show notifications and the system update in the pull down notifications will go away.
Just a temporary fix to get it out of the way. I reccommend just downloading a ZV6 rooted rom.
engine95 said:
This is the recommended way. http://forum.xda-developers.com/showthread.php?p=57182591
Click to expand...
Click to collapse
guys I mistakenly installed this update and now my phone is stuck in twrp where can I go to delete it or am I s.o.l please help
You will need to use LG Flash tool if you are stuck in TWRP.
LG Flash Tool How to Thread
A youtube video that might help
https://www.youtube.com/watch?v=1WgXuxDbmbc
im0rtalz said:
You will need to use LG Flash tool if you are stuck in TWRP.
LG Flash Tool How to Thread
A youtube video that might help
https://www.youtube.com/watch?v=1WgXuxDbmbc
Click to expand...
Click to collapse
thanks for this I'll have to wait until I'm near a computer or back home right now I'm vacationing in Florida
Try this first before doing the LG Flash
[Fix] Stuck in Custom Recovery
Thanks to acparker posts
randyrampage609 said:
thanks for this I'll have to wait until I'm near a computer or back home right now I'm vacationing in Florida
Click to expand...
Click to collapse
Downside: No Phone.
Upside: Nice weather!
From folks here in Chicago - no sympathy! :silly:
Good luck with the phone!
FractalSphere said:
Downside: No Phone.
Upside: Nice weather!
From folks here in Chicago - no sympathy! :silly:
Good luck with the phone!
Click to expand...
Click to collapse
Alls good now used a two command terminal combo from another thread that I'm trying to find
Sent from my LGLS990 using Tapatalk
---------- Post added at 11:15 PM ---------- Previous post was at 11:12 PM ----------
randyrampage609 said:
Alls good now used a two command terminal combo from another thread that I'm trying to find
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2916085
Without having to use a computer and lg flash tool
Sent from my LGLS990 using Tapatalk
Lucky you. Good find. Glad you got it sorted. Now you can relax.
I have a question that I wanted to ask before I go any further. I bought a G3 last week, rooted it and installed twrp recovery, and have done multiple backups.. Had a hardware defect so I had to exchange my phone for another new one. I received a system update just now so I was going to accept the OTA update since its not rooted, completely stock. My questions are will I be able to root and instally twrp after this update and once I install all my apps, and if rooting and installing twrp is successful, can I restore my backup that I did on my other phone, even though its a different phone? Its from the same carrier and same model phone. Thanks for your feedback.
jreink01 said:
I have a question that I wanted to ask before I go any further. I bought a G3 last week, rooted it and installed twrp recovery, and have done multiple backups.. Had a hardware defect so I had to exchange my phone for another new one. I received a system update just now so I was going to accept the OTA update since its not rooted, completely stock. My questions are will I be able to root and instally twrp after this update and once I install all my apps, and if rooting and installing twrp is successful, can I restore my backup that I did on my other phone, even though its a different phone? Its from the same carrier and same model phone. Thanks for your feedback.
Click to expand...
Click to collapse
Don't take OTA. Root it and TWRP it. Then flash STOCK ROM ZV6 Deodexed or Odexed, then you'll be up to date and keep root with TWRP.
Well I guess I've turned into that guy too...
I have a Verizon LG Optimus Exceed 2 (VS450PP) with some form of CWM recovery installed (I used a LG L70 ms323 version).
For some reason, recovery still boots into stock recovery, but when I chose the factory reset, I see a CWM logo for a fraction of a second..
I tried flashing Cyanogenmod 11, but stupid me, I didn't check if the boot.img was locked. (shoulda Bump'd it!).
Now I get a security error when booting, and recovery isn't working properly either.
I've searched high and low for the KDZ/TOT/DLL files for this phone and haven't found any yet, so I'm turning this over to you guys at XDA for help.
Please Help!
Thanks!
lmao if you think youre getting any help here
elisam98 said:
Well I guess I've turned into that guy too...
I have a Verizon LG Optimus Exceed 2 (VS450PP) with some form of CWM recovery installed (I used a LG L70 ms323 version).
For some reason, recovery still boots into stock recovery, but when I chose the factory reset, I see a CWM logo for a fraction of a second..
I tried flashing Cyanogenmod 11, but stupid me, I didn't check if the boot.img was locked. (shoulda Bump'd it!).
Now I get a security error when booting, and recovery isn't working properly either.
I've searched high and low for the KDZ/TOT/DLL files for this phone and haven't found any yet, so I'm turning this over to you guys at XDA for help.
Please Help!
Thanks!
Click to expand...
Click to collapse
Here you go: Link to VS450PP1_04.kdz
I'm having an awful time getting the w5c_twrp_bumped.img to actually do a backup on the Exceed 2. Worked like a dream on my Realm. I posted my dilemma a little further down the thread. Hopefully someone can come up with an answer...
Edit: Fixed the partition list in the recovery and it now works on the VS450PP in addition to the LS620. See post #33 in the thread linked above if interested.
So there's no working custom recovery for verizon exceed 2?
guest_2011 said:
So there's no working custom recovery for verizon exceed 2?
Click to expand...
Click to collapse
Yes there is : http://androidforums.com/index.php?posts/7080318
LG Exeed 2 TWRP 2.8.6
Sent from my LG-VS450PP using Tapatalk 2
fathergweedo said:
Yes there is : http://androidforums.com/index.php?posts/7080318
LG Exeed 2 TWRP 2.8.6
Sent from my LG-VS450PP using Tapatalk 2
Click to expand...
Click to collapse
installing. thanks.
But the bootloader is still locked so no custom roms for this phone ever, thanks to verizon?
guest_2011 said:
installing. thanks.
Click to expand...
Click to collapse
Thanks should go to the author over there, not me
But the bootloader is still locked so no custom roms for this phone ever, thanks to verizon?
Click to expand...
Click to collapse
Still possible by bumping a modified boot.img, but a debloated stock ROM is likely the most you will ever see. I had been working on one, but my time has been so very limited of late. Unfortunately, there's lot much love for sub $100 devices in the development community these days, and I don't possess the skill set for AOSP development myself (yet).
If you (or anyone) has the time to freeze some of the crap on an active one of these without breaking things, I'd love to hear about it. I could then create a debloated, deodexed, zip-aligned one to flash in TWRP.
fathergweedo said:
Thanks should go to the author over there, not me
Still possible by bumping a modified boot.img, but a debloated stock ROM is likely the most you will ever see. I had been working on one, but my time has been so very limited of late. Unfortunately, there's lot much love for sub $100 devices in the development community these days, and I don't possess the skill set for AOSP development myself (yet).
If you (or anyone) has the time to freeze some of the crap on an active one of these without breaking things, I'd love to hear about it. I could then create a debloated, deodexed, zip-aligned one to flash in TWRP.
Click to expand...
Click to collapse
This is one of those cheap phones that would benefit from love and support. Some things it does better than my GS3. I used Romtoolbox to delete non-system apps. Email, gmail, some google apps. Kept some verizon crap just in case. Not sure if safe to delete google talkback. Probably safe (http://www.androidcentral.com/what-google-talk-back). Possibly a few more apps/services can be deleted i can't think of right now. I have ~180MB free space with GPS and some other apps installed. 32GB SD FAT formatted for media, downloads, some gps maps. Never had luck with link2sd, don't want to swap internal<>external storage.
I was uninstalling apps with romtoolbox and accidentally deleted a home theme. Now the home screen blinks. Is there a way to flash stock? Rooted, TWRP installed. I used to do it with older LG phones but can't remember how i did emergency recovery.
guest_2011 said:
I was uninstalling apps with romtoolbox and accidentally deleted a home theme. Now the home screen blinks. Is there a way to flash stock? Rooted, TWRP installed. I used to do it with older LG phones but can't remember how i did emergency recovery.
Click to expand...
Click to collapse
Boot to your TWRP recovery and restore your latest working backup?
Pull Battery out
Put Battery back in
Hold Volume Down and Power until a white screen comes up
You should get 4 options
Use Volume Down to select Wipe Cache
Press Power Button
It should then go into TWRP
If you don't have a backup you can return to complete stock (wipes the phone) via the links in my posting over here.
fathergweedo said:
Boot to your TWRP recovery and restore your latest working backup?
Pull Battery out
Put Battery back in
Hold Volume Down and Power until a white screen comes up
You should get 4 options
Use Volume Down to select Wipe Cache
Press Power Button
It should then go into TWRP
If you don't have a backup you can return to complete stock (wipes the phone) via the links in my posting over here.
Click to expand...
Click to collapse
I've done accidental deletions with older phones but this time was different. I deleted my home screen theme while debloating. There's no LG emergency recovery tool, no KDZ on lg site. I dl elsewere and another custom lg tool from a forum. I could access settings and selected a new home screen theme. No need for recovery. I figured i can always dl a custom theme. Installed Nova launcher. Everything is good. I'll bookmark this page in case i screw up again. Thanks.
guest_2011 said:
I've done accidental deletions with older phones but this time was different. I deleted my home screen theme while debloating. There's no LG emergency recovery tool, no KDZ on lg site. I dl elsewere and another custom lg tool from a forum. I could access settings and selected a new home screen theme. No need for recovery. I figured i can always dl a custom theme. Installed Nova launcher. Everything is good. I'll bookmark this page in case i screw up again. Thanks.
Click to expand...
Click to collapse
The post has a link to the kdz. You might want to grab it in case they update it to something that you cannot root or install a custom recovery on. Wish I had one for the LG Transpyre before they updated it to 5.1.1. Just saying...
Sent from my XT907 using Tapatalk 2
fathergweedo said:
The post has a link to the kdz. You might want to grab it in case they update it to something that you cannot root or install a custom recovery on. Wish I had one for the LG Transpyre before they updated it to 5.1.1. Just saying...
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
I have 2 phones. Can i back up in TWRP and restore in the other phone? I've never done backups. Not a fan of backups in pc and phones.
Can QSLIDE be removed? I used to do it in L9 but i think i had to flash a zip file in recovery to get rid of it. Also quicknote needs to go.
guest_2011 said:
I have 2 phones. Can i back up in TWRP and restore in the other phone? I've never done backups. Not a fan of backups in pc and phones.
Can QSLIDE be removed? I used to do it in L9 but i think i had to flash a zip file in recovery to get rid of it. Also quicknote needs to go.
Click to expand...
Click to collapse
Wow. Never heard of QSLIDE, but if you don't backup, you can't play. Simple as that. Pay for TiB to (or whatever) freeze and test, or take your chances. I would NEVER delete stuff without any backup.
Sent from my XT907 using Tapatalk 2
I set up aquamail to see if this phone has notification light in home button. It does!!! very nice, unlike moto crap screen.
Amazing colors, so simple, so useful. Now whenever i need to know if i have messages i look at these phones instead of cheaporola screen.
I guess there's no hope for CM
fathergweedo said:
Here you go: Link to VS450PP1_04.kdz
I'm having an awful time getting the w5c_twrp_bumped.img to actually do a backup on the Exceed 2. Worked like a dream on my Realm. I posted my dilemma a little further down the thread. Hopefully someone can come up with an answer...
Edit: Fixed the partition list in the recovery and it now works on the VS450PP in addition to the LS620. See post #33 in the thread linked above if interested.
Click to expand...
Click to collapse
Can you repost KDZ pls? Link is dead.
guest_2011 said:
Can you repost KDZ pls? Link is dead.
Click to expand...
Click to collapse
Just verified link is good. Some have reported issues with Chrome and other browsers. Pulls fine with Firefox on my laptop and Lightning on my phone.
fathergweedo said:
Just verified link is good. Some have reported issues with Chrome and other browsers. Pulls fine with Firefox on my laptop and Lightning on my phone.
Click to expand...
Click to collapse
I use firefox, tried chrome, mobile firefox and stock cm13 browser, edge. Nothing works for me.
was able to get it here http://androidforums.com/threads/lg-exceed-2-resources.979449/
guest_2011 said:
I use firefox, tried chrome, mobile firefox and stock cm13 browser, edge. Nothing works for me.
was able to get it here http://androidforums.com/threads/lg-exceed-2-resources.979449/
Click to expand...
Click to collapse
I had *just* put this up for you on AFH and was about to link you to it. Thanks to myfishbear over there, I can remove it. No need to waste file space if available elsewhere. Nice that he put everything all in one place. :good:
fathergweedo said:
I had *just* put this up for you on AFH and was about to link you to it. Thanks to myfishbear over there, I can remove it. No need to waste file space if available elsewhere. Nice that he put everything all in one place. :good:
Click to expand...
Click to collapse
I was able to reflash, with errors in win10 for unknown reason, but kzd pushed through anyway and now i have a working phone again. Thanks.
Here's the link to his page just in case others have trouble
http://androidforums.com/threads/lg-exceed-2-resources.979449/
after a long wait for the firmware to be released of the S4 running OH7 , it still has not been released. However i decided to make it myself and now we finally have it. I have tested it on my S4 that came with OH7 build originally. So here you go guys, Firmware containing OH7 running lollipop 5.0.1 with stock kernel 3.4 of mon Sep. 7 2015.
little guide to help you install the firmware if you need it.
you will find the firmware link below that i have uploaded and as for odin you can just google it. now im sure you can use other versions of odin but always safest to be up-to-date.
you will need: OH7 firmware file (Download link at the bottom), odin 3.10.7, WinRar and USB data cable
steps:
1. put phone into download mode by holding the home+vol up+power keys at the same time.
2. plug your phone into your PC (be sure drivers for the phone are installed correctly)
3. open up your handy tool of Odin
4. open up the firmware file you have downloaded in Winrar and extract it, you will then be given an MD5 File containing the firmware
5. click on "AP" in odin and browse for the file (odin might not respond after that but be patient, it will)
6. after the program responds, double check that F. Reset time and Auto Reboot are the ONLY ones ticked/checked
7.Go ahead and hit start and sit back for a few minutes and let odin do its thing
8. after all goes well and in the top box says "PASS!" then your phone will reboot and be good as new.
Just a heads up that this firmware is meant and made for the prepaid variant of the Verizon S4. I wouldnt recommend trying it on the postpaid S4 for the postpaid firmware has negative effects on the prepaid variant so id assume it have the same outcome on postpaid variant. Also im not responsible like anyone else out there if you brick your phone by not following the steps correctly or flashing it incorrectly in some way. Just a disclaimer that everyone puts out on here. hope this helps everyone. enjoy!
If the link becomes a broken link, let me know and i will update. i just need to move the file from time to time due to high data traffic
Link Update
https://mega.nz/#!Uk412ZwR!IT_c5Lq6hxbs_CbDVJZKIEv9pAMony8vdUgvvVq0zuE
now that i have released the stock firmware of OH7, i am trying to Deodex this also but keep getting failed start ups. i used LBD 2.5 to try an deodex and followed the guide but i hear start up sound not even a second and it stops and it dont show the verizon logo. i used flashfire to flash the deodexed files. so that being said, could some actual dev, deodex this firmware for i cannot? id really appreciate it and id share the deodexed firmware on the thread as well with of course giving proper credit to whomever can deodex it. thanks!
bjf189 said:
now that i have released the stock firmware of OH7, i am trying to Deodex this also but keep getting failed start ups. i used LBD 2.5 to try an deodex and followed the guide but i hear start up sound not even a second and it stops and it dont show the verizon logo. i used flashfire to flash the deodexed files. so that being said, could some actual dev, deodex this firmware for i cannot? id really appreciate it and id share the deodexed firmware on the thread as well with of course giving proper credit to whomever can deodex it. thanks!
Click to expand...
Click to collapse
This needs to be maken into a rom first as well before deodexed but i can do both actually if you don't know how to build a rom.
Sent from my SM-G935V using Tapatalk
Well if you could do both, I'd really appreciate it. I can't even begin to understand how to extract an md5. So confusing. Plus gotta get it to work with flash fire. I tried other roms with flashfire and kept getting system not responding. So I always had to Odin back to stock and on the custom rom I never get even a boot animation. So I'm not sure what's up with it
stang5litre said:
This needs to be maken into a rom first as well before deodexed but i can do both actually if you don't know how to build a rom.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
What you think?
bjf189 said:
Well if you could do both, I'd really appreciate it. I can't even begin to understand how to extract an md5. So confusing. Plus gotta get it to work with flash fire. I tried other roms with flashfire and kept getting system not responding. So I always had to Odin back to stock and on the custom rom I never get even a boot animation. So I'm not sure what's up with it
Click to expand...
Click to collapse
Flash fire is horrible. Use v24 seems to be the best atm. I can do both. In the middle of mod'ing the s5 rom I made. But after I build it I would have you test it 1st before deodexing as you want to make sure it boots 1st before moving on.
Sent from my SM-G935V using Tapatalk
stang5litre said:
Flash fire is horrible. Use v24 seems to be the best atm. I can do both. In the middle of mod'ing the s5 rom I made. But after I build it I would have you test it 1st before deodexing as you want to make sure it boots 1st before moving on.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I think I tried your rom before. Your username was on a rom that I tried. It was non mdk which was said to use. I used flashfire beings I can't have safestrap on lollipop. It's all I could use to flash things thanks to a locked bootloader. But I'll try your suggestion and I can surely test what you put out for the s4. Just need an idea of what to use to flash things. And you talking version 24 of flashfire? Cause I already use that an got those outcomes. Also if it makes it any easier on you, could you just rebuild your ultranote5 rom for the prepaid variant? Whichever is easier for you. I loved the feature list that you had for it though I couldn't get it to get past the boot screen cause it would like freeze at the animation but at the same time there wasn't even an animation. Just a quick Samsung sound that doesn't even finish. Wish I knew more about rom development but it can get get complex I think.
bjf189 said:
now that i have released the stock firmware of OH7, i am trying to Deodex this also but keep getting failed start ups. i used LBD 2.5 to try an deodex and followed the guide but i hear start up sound not even a second and it stops and it dont show the verizon logo. i used flashfire to flash the deodexed files. so that being said, could some actual dev, deodex this firmware for i cannot? id really appreciate it and id share the deodexed firmware on the thread as well with of course giving proper credit to whomever can deodex it. thanks!
Click to expand...
Click to collapse
Not sure if it's still an issue or not, but I had similar problems before. Flashfire didn't seem to be finishing backups or flashes. I think I was using v18 or 19. Setting the screen timeout to 10 minutes fixed it, no problems after that and I just set it back when I'm done.
F1a5hP01ntX said:
Not sure if it's still an issue or not, but I had similar problems before. Flashfire didn't seem to be finishing backups or flashes. I think I was using v18 or 19. Setting the screen timeout to 10 minutes fixed it, no problems after that and I just set it back when I'm done.
Click to expand...
Click to collapse
My screen never shut off when I used flashfire. So I'm not sure. Could be something in flashfire being it was made for the s4. Not the prepaid variant. So maybe some code in it is different in the postpaid. Who knows
bjf189 said:
My screen never shut off when I used flashfire. So I'm not sure. Could be something in flashfire being it was made for the s4. Not the prepaid variant. So maybe some code in it is different in the postpaid. Who knows
Click to expand...
Click to collapse
Ah, not sure about that. I'm pretty sure my screen would shut off and then reboot shortly afterward as if it finished properly. I also just remembered that flashfire used to rearrange the order that the operations were added and would move the wipe toward the bottom of the list, usually after the flash. I would double check that the order is correct before starting if you haven't already. Those two were the only problems I had. Hope those tips help in some way.
F1a5hP01ntX said:
Ah, not sure about that. I'm pretty sure my screen would shut off and then reboot shortly afterward as if it finished properly. I also just remembered that flashfire used to rearrange the order that the operations were added and would move the wipe toward the bottom of the list, usually after the flash. I would double check that the order is correct before starting if you haven't already. Those two were the only problems I had. Hope those tips help in some way.
Click to expand...
Click to collapse
Well far as I know I'm using the up to date version which is .24. I haven't had the screen off issue or the rearranging problem. Flashfire showed what it was doing and what order it did it in. Everytime I used it, if the screen went black, it would say rebooting...after all was finished. So maybe the version you had was just buggy which the dev did say its a work in progress. Stuff like that, I'd be surprised if they got it to work perfectly with no bugs
stang5litre said:
Flash fire is horrible. Use v24 seems to be the best atm. I can do both. In the middle of mod'ing the s5 rom I made. But after I build it I would have you test it 1st before deodexing as you want to make sure it boots 1st before moving on.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I am more then willing to test any roms out as well. My new Galaxy S4 prepaid is only for tethering on my unlimited data, so I need a rom that I can install Xposed Framework on. Any rom that comes out and needs testing for OH7 based phones, I am onboard with.
TheXev said:
I am more then willing to test any roms out as well. My new Galaxy S4 prepaid is only for tethering on my unlimited data, so I need a rom that I can install Xposed Framework on. Any rom that comes out and needs testing for OH7 based phones, I am onboard with.
Click to expand...
Click to collapse
Well I am looking to install xposed as well but we gotta wait for the dev to have free time to rebuild a rom to the oh7. Well at least he has two people willing to test now for him. How did you get unlimited data with Verizon? They so stingy with data
Sorry been busy. Will build it tonight. Already deodexed. Just got to build it. If all you doing is using it for a hot spot why waste time building a rom for it. Dl a app and use your hot spot. I use foxfi on my s7 edge. Works np.
Let me know. Thought this was for people to actually use.
Sent from my SM-G935V using Tapatalk
---------- Post added at 09:15 AM ---------- Previous post was at 09:14 AM ----------
bjf189 said:
Well far as I know I'm using the up to date version which is .24. I haven't had the screen off issue or the rearranging problem. Flashfire showed what it was doing and what order it did it in. Everytime I used it, if the screen went black, it would say rebooting...after all was finished. So maybe the version you had was just buggy which the dev did say its a work in progress. Stuff like that, I'd be surprised if they got it to work perfectly with no bugs
Click to expand...
Click to collapse
Black screen means the order was incorrect and wipe was moved to the end.
Sent from my SM-G935V using Tapatalk
stang5litre said:
Sorry been busy. Will build it tonight. Already deodexed. Just got to build it. If all you doing is using it for a hot spot why waste time building a rom for it. Dl a app and use your hot spot. I use foxfi on my s7 edge. Works np.
Let me know. Thought this was for people to actually use.
Sent from my SM-G935V using Tapatalk
---------- Post added at 09:15 AM ---------- Previous post was at 09:14 AM ----------
Black screen means the order was incorrect and wipe was moved to the end.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I'm not looking to use it for the hotspot. I already can use it without any problems. I'm just wanting a custom rom/modded stock rom, I hate full stock and I love being deodexed. I'm sure more people will use your rom once they discover it.
If you believe that flashfire moved the order around, what can I do to stop that? The log in it says what it's doing and it says it's going in correct order so im not sure. Ive been using v24 which is latest I think
bjf189 said:
I'm not looking to use it for the hotspot. I already can use it without any problems. I'm just wanting a custom rom/modded stock rom, I hate full stock and I love being deodexed. I'm sure more people will use your rom once they discover it.
If you believe that flashfire moved the order around, what can I do to stop that? The log in it says what it's doing and it says it's going in correct order so im not sure. Ive been using v24 which is latest I think
Click to expand...
Click to collapse
Flash Fire moves it on its own right before you flash. You have to press and hold wipe and drag it to the top. It does this a lot. Pain in the arse. Ok I'll build it then just wasn't sure
Sent from my SM-G935V using Tapatalk
stang5litre said:
Flash Fire moves it on its own right before you flash. You have to press and hold wipe and drag it to the top. It does this a lot. Pain in the arse. Ok I'll build it then just wasn't sure
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I did that cause it put it at the bottom at default. I moved it to the top but still got same outcome. Maybe it's something to do with the kernel an bootloader bring different? That's my guess
bjf189 said:
I did that cause it put it at the bottom at default. I moved it to the top but still got same outcome. Maybe it's something to do with the kernel an bootloader bring different? That's my guess
Click to expand...
Click to collapse
What were you flashing?
Sent from my SM-G935V using Tapatalk
stang5litre said:
What were you flashing?
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Well I tried out your ultra note5 and non mdk one. I believe the ultra note wouldn't show the boot animation and cut off booting sound after a second then did nothing. The other one which was the non mdk one, didn't show boot animation but made the Samsung sound correctly but after booting into the system like ten minutes later of waiting, I get a pop up of system is not responding. If I ignore it an let it load another ten minutes or so, the setup wizard opens but if I hit wait or close on the system not responding box, it all closes and goes to black screen again and just repeats
bjf189 said:
Well I tried out your ultra note5 and non mdk one. I believe the ultra note wouldn't show the boot animation and cut off booting sound after a second then did nothing. The other one which was the non mdk one, didn't show boot animation but made the Samsung sound correctly but after booting into the system like ten minutes later of waiting, I get a pop up of system is not responding. If I ignore it an let it load another ten minutes or so, the setup wizard opens but if I hit wait or close on the system not responding box, it all closes and goes to black screen again and just repeats
Click to expand...
Click to collapse
Uploading stock rom for you to try....androidfilehost keeps losing connection.. You already built the rom from what i read a page back. So do you want me to just Upload the deodexd stuff for you to insert?
Sent from my SM-G935V using Tapatalk