Hello guys.. I would like to share with you LG G4 custom kernel for stock based roms. [H815] . Kernel is stock close, compiled from latest sources from LGE .
Compiled using aarch64-linux-android-4.9 toolchain
Kernel is for LG G4 [H815] device and your bootloader must be unlocked before flashing!
Bootloader unlock
5.1 - KERNEL-STOCK
v1.1 Initial Release
- init.d support
- permissive selinux
- exfat fs support
v1.2 Release
- added I/O Schedulers (bfq,fiops,zen,sio)
- bcmdhd:reduced rx wakelock
v1.3 Release
- improved stability and overall smoothness.
- ramdisk updates to support all lollipop stock based roms - 10x
- busybox auto install if not present
- KCAL post-processing driver @savoca
- compiled every TCP Congestion Algorithm into the kernel so now every user will be able to choose which one to use:
-bic
-reno
-cubic
-westwood
-vegas
-veno
-yeah
-illinois
-more information on github...
v1.4 Release
- No CPU and GPU overclocking yet
- Synapse support (install app from playstore)
- USB Fast charge
- Added state notifier driver @neobuddy89
- Added Adreno Idler @arter97
- Fixed GPU frequency scaling (180-600Mhz)
- Drivedroid support
- Updated touchscreen firware to L0L55P1_1_11
- Updates and fixes from google and CAF msm-3.10
- More information on github...
v1.5 Release
-Overclock A53/384-1632 A57/384-2016 (choose during aroma installation)
- USB mouse and keyboard support
- Fauxsound support(use faux123 app)
- updated zram driver from linux 4.1
- More information on github...
Version Information
Current version: 1.5
Status:Stable
6.0 - KERNEL - STOCK
v1.6 Release
- support all marshmallow stock based roms - 20x
- autoroot if your system is not already rooted
- busybox auto install if not present
- init.d support
- permissive selinux
- exfat fs support
- added I/O Schedulers (bfq,fiops,zen,sio)
- compiled every TCP Congestion Algorithm into the kernel so now every user will be able to choose which one to use:
-bic
-reno
-cubic
-westwood
-vegas
-veno
-yeah
-illinois
- KCAL post-processing driver @savoca
- USB Fast charge
- State notifier driver @neobuddy89
- Adreno Idler @arter97
- Added Impulse governor
- Fixed GPU frequency scaling (180-600Mhz)
- Drivedroid support
- Fauxsound support(use faux123 app)
- Overclock A53/384-1632 A57/384-2016 (choose during aroma installation)
- More information on github...
v1.7 Release
- latest CAF updates
- /dev/frandom support
- usb debugging fixed
- show cpu voltages via sysfs
- updated state notifier driver
- updated adreno idler driver
- updated impulse governor
- 27Mhz gpu sleep state frequency
- fauxsound works with kernel adiutor now
- less aggressive thermal throttling
v1.8 Release
- LGE 20d kernel source
- Latest CAF updates
- Zram backport (linux 4.1)
- Full crypto support
- Optimized cpufreq/governors
- A53/A57 clusters undervolted (-25mV)
- Reduced wlan timeout wakelock (current value 4/25%)
- Motorola's lmk,shed and power optimizations
- Disable thermal-engine hotplug and poll instead (50c) (flar2)
- Sound control V2 (faux123/flar2/cile381) (cleaned and adapted for G4)
- Kernel now use frandom as RNG
- 27Mhz GPU min freq (idle/sleep)
- Disabled PM fsync-added Dynamic fsync (faux123/Boefla)
- Disabled CRC control
- Tuned LGE lbfc/cancun for overclocking ability
- Removed autoroot option from kernel (either way kernel support system/less root)
To change the kernel values use Kernel Adiutor.
Version Information
Current version: 1.8
Status:Stable
Source:
Source
Toolchain
Credits:
- faux123
- savoca
- flar2
- arter97
- neobuddy89
- Dees-Troy
DOWNLOAD
_____________________________________________
*H815* *5.1 *
-Kernel v1.1
-Kernel v1.2
-Kernel v1.3
-Kernel v1.4
_____________________________________________
*H811* *5.1*
-Kernel v1.3
-Kernel v1.4
______________________________________________
*H815/H811 *5.1* UNI*
-Kernel v1.5
===============================================
*H815*6.0*
-Kernel v1.6
-Kernel v1.7
-Kernel v1.8
*SUPERXE KERNEL - H815*MM - 6.0.x - CM13 BASED ROMS*
V1.0
- Overclock A53/384-1632 A57/384-2016 (choose during aroma installation)
- KCAL post-processing driver @savoca
- Compiled every TCP Congestion Algorithm into the kernel so now every user will be able to choose which one to use:
- USB Fast charge
- Drivedroid support
- exfat fs
- CPU voltages via sysfs (ro)
- Motorola's lmk,shed and power optimizations
- Sound control V2 (faux123/flar2/cile381) (cleaned and adapted for G4)
- Disabled PM fsync-added Dynamic fsync (faux123/Boefla)
- Disabled CRC control
V.1.1
-New installation method (kernel now supports all CM based roms)
Version Information
Current version: 1.1
Status:Testing
DOWNLOAD
_____________________________________________
Kernel - CM13 - v1.0
Kernel - CM13 - v1.1
How to install:
- Download kernels
- Flash through custom recovery
- Done
*TWRP RECOVERY H815*MM-6.0.x*
- Built from android-6.0.1_r16 sources
- Flash through the existing recovery
-Enjoy
CHANGELOG for 2.8.7.0:
- Initial ground work for software drawn keyboard (_that)
- Fix handling of wiping internal storage on datamedia devices (xuefer)
- Allow DataManager to set and read values from the system properties (xuefer)
- Fix crash when taking screenshots on arm64 devices
- Fix error message after an ORS script completes (Dees_Troy)
- Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
- Add system read only option – more details below (Dees_Troy)
- Add resize2fs and GUI option to run resize2fs (Dees_Troy)
- Fix crash loop caused by empty lines in AOSP recovery command file (_that)
- Prevent duplicate page overlays such as multiple lock screens (mdmower)
*DOWNLOAD 2.8.7.0*
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHANGELOG for 3.0.0.0:
- Completely new theme - Much more modern and much nicer looking (by z31s1g)
- True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
- Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
- Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
- Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
- Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
- SuperSU prompt will no longer display if a Marshmallow ROM is installed
- Update exfat, exfat fuse, dosfstools (by mdmower)
- Update AOSP base to 6.0
- A huge laundry list of other minor fixes and tweaks
*DOWNLOAD 3.0.0.0*
CHANGELOG for 3.0.2-0:
- support new CM 13.0 pattern encryption (sultanqasim)
- fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
- libtar updated to latest upstream and fixes (jcadduono)
- fixes for loading custom themes (_that)
- TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
- translation updates – added Italian, Czech and Polish and significant updates to Dutch
- progress bar improvements – progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
- fix input box text display (Dees_Troy)
- Reboot option after zip install complete (bigbiff)
- Other mostly invisible bug fixes and improvements
*DOWNLOAD 3.0.2-0*
Beer? I'm always in the mood !
...
cile381 said:
Hello guys.. I would like to share with you custom kernel for LG G4 [H815] . Kernel is stock close, compiled from latest sources from LGE .
Compiled using aarch64-linux-android-4.9 toolchain
Kernel is for LG G4 [H815] device and your bootloader must be unlocked before flashing!
Bootloader unlock
Initial Release
- init.d support
- permissive selinux
-
Source
Toolchain
Click to expand...
Click to collapse
Great!!!thank you!!!
Inviato dal mio GT-I9300 utilizzando Tapatalk
Thank you for your work, but the init.d support, not support me
Kernel is work with exFat? Thanks for your hard work.
Gesendet von meinem LG-H815 mit Tapatalk
ang3lical said:
Thank you for your work, but the init.d support, not support me
View attachment 3489370
Click to expand...
Click to collapse
With me working ok. Otherwise, this application shows with me also same thing as for you...
A script for the test in the init.d folder something else
Waiting anyone else to confirm...
Thank you for continuing development for the g4!...btw any chance for a h811 version...if not thanks anyway for bringing more to the g4!
vietnam100 said:
Kernel is work with exFat? Thanks for your hard work.
Gesendet von meinem LG-H815 mit Tapatalk
Click to expand...
Click to collapse
Not for now...will take care of it ...
Now... I just need my bootloader to be able to be unlocked.
Keep up the good work!
New release!
Kernel now supports exfat fs :good:
cile381 said:
With me working ok. Otherwise, this application shows with me also same thing as for you...
A script for the test in the init.d folder something else
Waiting anyone else to confirm...
Click to expand...
Click to collapse
Ok thankss!!
Great!
Big Thx for your hard work!
Is it possible to add some governors like zzmove?
I see, that always all cores are online with the stock kernel and I think, if some of them will get off, while some are online, the battery saving will be much better.
Thanks for this kernel!
Is it compatible with Kcal app?
[email protected] said:
Great!
Big Thx for your hard work!
Is it possible to add some governors like zzmove?
I see, that always all cores are online with the stock kernel and I think, if some of them will get off, while some are online, the battery saving will be much better.
Click to expand...
Click to collapse
It would be perfect
https://github.com/777jon/cpufreq-governor-zzmoove
thank you for you hard work!
Added @savoca KCAL post-processing driver into kernel and works great :good:
how does the kernel perform?
performance and battery better, equal or worse?
Does this work with all software versions?
I'm H815 stock rooted, bootloader unlocked using 10c. I can use this no problem?
Next to the Governors, can u please add westwood as tcp algorithm?
Gesendet von meinem LG-H815 mit Tapatalk
El Presidente81 said:
Does this work with all software versions?
I'm H815 stock rooted, bootloader unlocked using 10c. I can use this no problem?
Click to expand...
Click to collapse
Yes, no problem at all.
Great, thank you.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Lightest Kernel for the Galaxy Note 2 Ever Made!!
INFOS ABOUT uNEAK ENGINE APP: Click Here!!
INFOS ABOUT uNEAK OTA UPDATER (included in uNEAK Engine): Click Here!!
INFOS ABOUT uNEAK WOLFSON AUDIO CONTROL (included in uNEAK Engine): Click Here!!
uNEAK Engine CODED BY SIMONE201
uNEAK ENGINE (free) ----->
--- uNEAK ENGINE Pro Key ----->
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU'RE USING MY KERNEL PLEASE ADD ONE OF THESE SMALL BANNERS INTO YOUR SIGNATURE!! THANKS IN ADVANCE!!
(by nrk_2k & zantekk)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- Based on Samsung official sources (updated to N8000u7), updated to 3.0.96
- Governors: PegasusQ (default), Ondemand, LulzactiveV2, Performance, Conservative (module), Lazy (module)
- Schedulers: BFQv6r2, Noop, SIO, VR (default)
- Using JRCU (++smoothness, ++responsiveness)
- XZ Compression only for KERNEL (--size)
- Fully compatible with: uNEAK ENGINE, MC Manager, Tegrak's Lulzactive app, Voltage Control, SetCPU, NSTools
- Fully compatible with 4.1.2 ROMs
- Fully compatible with 4.3 AOSP roms
- Fixed exynos-mem bug exploit (thx to Sammy)
- Fixed SDS death bug (thx to Sammy)
- Wolfson Audio Control (thx to AndiP for the implementation) ----> featured in uNEAK Engine
RAMDISK AND MISC:
- LED Fade support (thx to teamhacksung)
- Init.d Support :laugh:
- CIFS and FUSE built in the kernel (no modules)
- Android Logger (logcat) already enabled into the kernel
- Multi-Core Interface (renewed Tegrak's 2ndCore) -----> CLICK HERE for infos
- FSync Control Interface (thx to Ezekeel - featured into uNEAK Engine)
- TouchBooster Control (thx to franciscofranco)
- CM10.2 and derivates support (AOSP)
CPU/GPU:
- NO OC!!!! (200-1600Mhz)
- CPU Undervolt support (thx to netarchy, Entropy512 & AndreiLux)
- Complete control of freqs/voltages with Voltage Control/SetCPU/uNEAK
- GPU Overclock/Undervolt & Stepcount Interface (by gm & AndreiLux)
- Charging current interface support (original by gm, ported by me) ----> AC, USB, MISC and DOCK supported
MEMORY & PERFORMACES:
- ARM CPU Topology + Sched_MC (can be enabled via uNEAK Engine, disabled by default)
- SLQB Memory Allocator (better memory management)
- Improved memory management functions
- Allow CPU Unaligned access (++performaces)
- AFTR ARM Idle Mode (enable via uNEAK Engine) (++battery)
CONNECTIVITY TWEAKS:
- Stochastic Fair Blue NET Scheduler
- Veno TCP Congestion Control algorithm
- Proportional Rate Reduction for TCP
- Reduced debugging WiFi/BT
- TCP/IP Tweaks
- TCP buffer tweaks
OPTIMIZATIONS:
- exFAT OpenSource Drivers (Thx to Sammy) --> support for >32GB sdcards
- Heavily reduced debug system (logcat and last_kmsg support is still there) (++speed, --size)
- Heavily Optimised TouchBooster logic :good: ----> greatly improved smoothness
- SW Sync framework support
- Using Standalone Hotplug driver with non-hotplug governors (thx to gm)
- 3 CPU cores OFF when screen is locked (thx to arighi for original implementation) ----> with non-hotplug govs
- Upstream patches and fixes from Linux mainline kernel
- Compiled with Linaro GCC 4.7 (2013.08) + NEAK CFLAGS (heavily optimised) + Graphite Optimisations + O3 Optimisations
- Optimised EXT4 filesystem
- Generally optimised code (removed useless functions and variables, fixed warnings)
and many others...
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- uNEAK ENGINE APP (available for free - Check out Play Store)
- uNEAK OTA Updater (included into uNEAK Engine)
- uNEAK Wolfson Sound Control (included in uNEAK Engine)
- TouchWake (included in uNEAK Engine)
- Kernel LED Alerts (included in uNEAK Engine) -----> INFOS HERE (incoming)
- Multi-Core Interface (features also Multi-Core Manager App)
- NO COMPRESSION for Ramdisks
- FSync Control interface (thx to Ezekeel)
- Tweaked PegasusQ, Ondemand, lulzactive and lazy governors
- Tweaked BFQ, SIO and VR Schedulers for NAND devices
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
N7100 GSM RELEASES:
v2.2x SAMSUNG FWs & Derivates Zip: Click Here
v2.2x SAMSUNG FWs & Derivates TAR: Click Here
v2.2x CM10.2 (4.3) & Derivates Zip: Click Here
v2.2x CM10.2 (4.3) & Derivates TAR: Click Here
Click to expand...
Click to collapse
N7105/T889/I317 LTE RELEASES:
v2.2x SAMSUNG FWs & Derivates Zip: Click Here
v2.2x SAMSUNG FWs & Derivates TAR: Click Here
v2.2x CM10.2 (4.3) & Derivates Zip: Click Here
v2.2x CM10.2 (4.3) & Derivates TAR: Click Here
Click to expand...
Click to collapse
DON'T FORGET TO SUPPORT MY WORK WITH A SMALL DONATION! LINK IN MY SIGNATURE!!
uNEAK ENGINE APP DOWNLOAD LINK:
uNEAK ENGINE PRO KEY DOWNLOAD LINK:
OLD DOWNLOADS:
Check Here: http://code.google.com/p/neak-kernel-note2/downloads/list
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BUG TRACKER (write here your bug reports!!): Click Here
KNOWN BUGS:
- Charging LEDs may not work if led alerts and triggers are enabled (only AOSP)
- Kernel Version --> Unavailable (AOSP, not a problem actually)
Please don't report any of the known bugs, or your post will be deleted asap
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
v2.2x (AOSP&SAMMY):
KERNEL:
- Updated to Linux 3.0.96
- Added exFAT support (thx sammy for the opensource drivers)
- mmc: fix the workqueue overload battery waste
- cypress: report led status via sysfs
- smdk4412: max77693_haptic: move sysfs node
- max77693_haptic: disabling DEBUG flag
RAMDISKS:
- CM10.2 (Android 4.3) support (AOSP)
- NO MORE CM10.1/4.2.2 SUPPORT IN AOSP!!
Click to expand...
Click to collapse
Code:
v2.1x (AOSP&SAMMY):
- Updated to Linux 3.0.87
- Updated BFQ scheduler to BFQv6r2
- charge_current: ignore unstable power and margin options (thx to AndreiLux)
- bcmdhd: updated from I9500U2 sources
- touch_wake: version 1.1 (thx to Yank555)
- Updated AOSP ramdisks from latest cm nightly
- defconfig: enabled SELinux support (AOSP)
v2.0.2x (AOSP&SAMMY):
- Fixed LED notifications issues
- The default LED trigger is now "none" (aka Disabled), please use the app to configure the LED Alerts
v2.0.1x (AOSP&SAMMY):
- Updated to Linux 3.0.80
- Fixed CPU stuck at max frequency
v2.0x (AOSP&SAMMY):
- Updated to Linux 3.0.79
- Fixed WiFi issues (and tethering)
- VENO TCP congestion control algorithm
- misc: TouchWake --> featured in uNEAK Engine (from v2.0)
- misc: Kernel LED Alerts --> see above for infos, featured in uNEAK Engine (from v2.0)
- Enabled CONFIG_AIO
- Various sched patches (AndreiLux)
- Linaro O3 Optimisations
v1.9x (AOSP&SAMMY):
- Updated to Linux 3.0.74
- bcmdhd: wifi drivers from I9500 sources
- mms152_ts: fixing touchbooster bug which may cause being stuck at freq lock (thx to DerTeufel)
- backport: smp: patches from mainline 3.5
- ARM: decompressor: Enable unaligned memory access for v6 and above
- ea8061: Allow brightness to 300 cd
- Updated from latest sammy rom available
v1.8x (AOSP&SAMMY):
- Updated to Linux 3.0.71
- bcmdhd: wifi drivers from N8000U5 sources (common)
- wolfson_audio: fixed eq issues (+ misc fixes)
- wireless: backport from 3.4
- Upstream android patches
- fbearlysuspend: reduced msleep to 100ms
- drivers: mmc: disable CRC
- mali_r3p1: updated from Note8 sources
- Add frandom(/dev/frandom)
- More entropy tweaks
- timer: hrtimer: Don't check idle_cpu() before calling get_nohz_timer_target()
- sched: Create sched_select_non_idle_cpu() to give preferred CPU for power saving
- usb-gadget: Booting from g_file_storage in cdrom mode
- Updated Linaro toolchain to 2013.03
v1.7x (AOSP&SAMMY):
- Linux 3.0.67
- Updated Wolfson Sound to 1.6.0
- Mali R3P1 drivers (AOSP)
- Updated WiFi drivers (AOSP)
- power: fbearlysuspend draw delay (400ms) ---> fixes CRT on sammy roms
- rwsem: steal writing sem for better performance
- tmpfs: fix mempolicy object leaks
- No more support for CM10 (AOSP)
- Updated CM10.1 ramdisks
v1.6x (AOSP&SAMMY):
- Should solve all the battery drain issues (hopefully)
- Reverted some patch related to cpuidle and workqueue
- Dynamically adjust cpufreq_max_limit according to scaling_max (Yank555)
- Updates and refactorings of post-init tweaks (thx to dorimanx)
v1.5x (AOSP&SAMMY):
6th Release
v1.4x (AOSP&SAMMY):
5th Release
v1.3x (AOSP&SAMMY):
4th Release
v1.2x (AOSP&SAMMY):
3rd Release
v1.1x (AOSP&SAMMY):
2nd Release
v1.0x (AOSP&SAMMY):
1st Release
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SOURCE CODE (2 branches, dev & master): Click Here
Credits:
- Samsung (original sources)
- Hardcore (screen patches + some scripts)
- Gokhanmoral (patches + some scripts)
- netarchy (GPU OC/UV + conservative patch)
- Entropy512 (many fixes & patches)
- Tegrak (lulzactive + original 2nd core)
- Cattleprod (some fixes and patches)
- Linaro (arm topology + compiler)
- myfluxi (many patches!)
- DerTeufel (patches and misc)
- AndreiLux (patches and misc)
- franciscofranco (patches)
- Ezekeel (FSyncControl)
- AndiP (Boeffla Sound)
- Yank555 (patches & help)
- Reb0rn (amazing tester)
and many others that have helped or supported me!
by Simone201 :good::good:
XDA:DevDB Information
N.E.A.K. Kernel for Note 2, a Kernel for the Samsung Galaxy Note II
Contributors
simone201
Kernel Special Features: uNEAK Engine, Wolfson Audio Control, TouchWake, NEAK Smart Response, Amazing battery life
Version Information
Status: Stable
Current Stable Version: 2.2x
Stable Release Date: 2013-09-15
Created 2013-09-15
Last Updated 2013-11-03
One reserved (at least)
Will try this for fun for my build, seen your development on your git
Skickat från min GT-N7100 via Tapatalk 2
looking good will give this a try shame there is no overclock
strikerdj2011 said:
looking good will give this a try shame there is no overclock
Click to expand...
Click to collapse
you won't regret of no OC, it is kinda useless when a kernel is heavily optimised :good:
simone201 said:
you won't regret of no OC, it is kinda useless when a kernel is heavily optimised :good:
Click to expand...
Click to collapse
This. Have been following your work since galaxy s days. Roms then kernels. Good work mate and no need of oc when its note 2 coupled with simones tweaks
Awesome. Used your kernel on my old S2 i9100 :good:
One question: The .tar can be flashed with odin even if I don't have cwm installed?
darkchazz said:
Awesome. Used your kernel on my old S2 i9100 :good:
One question: The .tar can be flashed with odin even if I don't have cwm installed?
Click to expand...
Click to collapse
Yes it has to be flashed with odin
Looks promising. On my test list for tomorrow
Finally replaced the logos with Note2 modified ones, if someone has a good new logo to send me, well just contact me!
Want to see some feedbacks tho
Looks interesting. Now I just need to figure out what rom I should flash
/CK
exFAT support is broken... That's very bad...
take back what i said about the overclocking this is a fast kernel like really going to enjoy using this one great work
Sweeeeet!
Sent from my GT-N7100 using Tapatalk 2
The best kernel for I9100 is now available on my N7100 . Definitely going to give it a try. Glad to see good developers working on Note 2 !
j-a-c-k said:
exFAT support is broken... That's very bad...
Click to expand...
Click to collapse
I will never support exFAT sorry, this is because i want to use SLQB memory allocator, otherwise i should use SLUB for exFAT, but that's not what i want for NEAK
Just flashed it on....all i can say the best kernel for Note2.......awesome work guys + the tweak apps from Google Play it rocks
Strange I flashed this and my phone start lagging like crazy??? Do I need to uninstall set cpu???
Sent from my GT-N7100 using XDA Premium HD app
Jeshter2000 said:
Strange I flashed this and my phone start lagging like crazy??? Do I need to uninstall set cpu???
Sent from my GT-N7100 using XDA Premium HD app
Click to expand...
Click to collapse
Remove any apps that may control the cpu, also clean up your init.d folder please
Because this is IMPOSSIBLE
About FS
simone201 said:
I will never support exFAT sorry, this is because i want to use SLQB memory allocator, otherwise i should use SLUB for exFAT, but that's not what i want for NEAK
Click to expand...
Click to collapse
Then your kernel can mount microsd in ext4/3/2 or NTFS?
Thanks in advance & sorry for my English.
This kernel is ONLY for SAMMY4.3 / CM11 / OMNI / TEMASEK / SLIMKAT / CARBON !!!
Dualboot IS WORKING !!! (reboot to desired rom via stweaks dualboot tab or via @Derteufel1980 recovery)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Current version : [ 2.3.2 ] - (15/08/2014) {Downloads} {Changelog on post #2}
Features :
- Based on Samsung Update13 Sources & patched to latest sources drop (Update14)
- Updated to latest XXUGMK6 ramdisk
- Patched to latest Linux 3.0.101 (EOL)
- Compiled with linaro gcc 4.7.4 build 2014.04 (optimized for cortex-a9) (thx @Christopher83) :good:
- DUAL Sound-Engine : Audio enhancement and sound boosting for great headphone experience (Wolfson Sound Engine AND ScoobyDoo Sound Engine 1.1 selectable via STweaks)
- Touch-to-Wake support
- Configurable LED behavior + LED fading support
- MDNIE full control
- Cpu OC support (up to 1600Mhz)
- Cpu UV support
- Gpu OC support (up to 700Mhz)
- Gpu UV support
- Governors : Pegasusq [default] / Zzmoove 0.9beta / Lulzactiveq / SmartassV2 (Configurable via STweaks :good: )
- I/O Schedulers : Deadline - cfq[default] - noop - row - sio - vr - fifo - bfq
- Xpad support
- TriangleAway support
- USB OTG support
- Network filesystems support (nfs, cifs, sunrpc)
- Dynamic FSync 1.2 - Configurable via Stweaks (On by default)
- Asynchronous Fsync (thx @faux123)
- init.d support
- Custom bootanimation support (bootanimation.bin or bootanimation.zip to be placed in /data/local/)
- Increased values for SD ReadAhead - Configurable via Stweaks
- TCP congestion control (cubic[default]-wetswood-bic-hctp) configurable via STweaks
- Auto-root (updated to latest su and supersu with daemon autorun)
- NTFS automounting for USB sticks, mounted to /mnt/ntfs folder in Read Only mode
- ExFAT support
- Charge current for AC & USB raised (Configurable via STweaks) & ignore unstable power & ignore safety margin
- CRT-OFF support (Early Suspend) [Adjustable]
- Almost everything is configurable via simple and free STweaks (included in the kernel)
- MORE TO COME ...
Thanks :
- Gokhanmoral !!!
- @Yank555
- @DerTeufel1980
- Samsung : For the code source
- @arbi97, @davtse, @FadeFx, @habylab, @qtwrk, @rafaelpernil ¹ Abo3mood & my friend @romskii : my first and only beta testers (Beta team is now complete, no more additions)
- @qrashers for the Googy-Max Kernel logo & user / betatester signatures
- and last but not least, THE WONDERFUL XDA COMMUNITY !!!
Source : Up-to-date
https://github.com/googyanas/Googy-Max2-Kernel
Signature for users :
Official Mirror kindly maintained by @romskii (Roman Kunkel)
http://www.mediafire.com/folder/318p14e5j5821/Official_Release
XDA:DevDB Information
(15/08) Googy-Max2 Kernel 2.3.2 [CM CAMERA FIXED] (Linaro GCC 4.7.4), Kernel for the Samsung Galaxy S III I9300
Contributors
googy_anas, arbi97, davtse, FadeFx, habylab, qtwrk, rafaelpernil, romskii, Abo3mood (Beta team is now complete, no more additions)
Kernel Special Features:
Version Information
Status: Stable
Created 2013-11-08
Last Updated 2014-08-15
Q & A
a) how to install cm11 as 2ndrom via derteufel recovery ?
DOWNLOAD DERTEUFEL'S RECOVERY FROM ATTACHEMENT OR DOWNLOAD SECTION
1- Flash derteufel's recovery (get it from his thread) and reboot to recovery. Thx to @DerTeufel1980
1.a- (Optional) if you don't already have a 2ndrom filesystem then go to dualboot menu to create it (may take some time)
2- Go to flash zip menu then choose where your zip is (sdcard/sdcard1) and choose to flash ROM (not ZIP) to 2ndrom then choose your cm11 file
2.1- (Optional) go to flash zip menu then choose where your zip is (sdcard/sdcard1) and choose to flash ZIP (not ROM) to 2ndrom then choose your gapps file
3- REFLASH Googy-Max2 kernel as the recovery overwrites it every time a rom is flashed (to 1strom or 2ndrom)
4- In the main recovery menu, choose to reboot to 1st or 2nd rom, Googy-Max2 handles it
Changelog
Changelog :
[15/08] Version 2.3.2 :
- mm: cache louis fixes
- futex: fixes from Thomas Gleixner
- Fix CVE-2014-3153
- smdk4412: cypress-touchkey - add keydisabler (thx cyanogenmod)
- misc changes (fs, kernel, cache, net, uaccess, cpuidle, cpufreq, smp)
- Enable PM_HOTPLUG again
- disable ASYNC_FSYNC (causing lags)
- smdk4412: update mali driver
- Update to GT-I9300_JB_Opensource_Update14
- Update ZZMoove 0.9 beta3 (thx ZaneZam)
- some ramdisks updates
Codename of this version : "I'm still standing !!!"
[28/04] Version 2.3.1 :
- Back to standard Googy-Max2 mainline wwith proper cm camera fix !
- CM CAMERA IS WORKING FLAWLESSLY !!! :good: :good:
- mm: fix memory management & CM CAMERA FIX
Codename of this version : "Goodbye i9300, Hello i9505 Sorry guys !!!"
[25/04] Version 2.3.0 :
- Rebased on Samsung Update13 from scratch and re-implemented all features
- CM CAMERA IS WORKING FLAWLESSLY !!! :good: :good:
- PegasusQ is now stock and its tunables are removed from Stweaks
- bfq scheduler is removed
- ramfs: updated CarbonKK ramdisk to fix bootloop
- Stweaks: charge control: set min current to 400 and max to 1500 with 25 stepping
- ramfs: automatically replace CM video shutter sound with a softer one (to avoid the "boing" sound at the beginning of video playback)
Codename of this version : "I FELL IN LOVE WITH CYANOGENMOD ... AGAIN !!!"
[16/04] Version 2.2.2 :
- ramfs: fixed stweaks problem on slimkat-based roms
- included latest cyanogenmod kernel commits
- kernel: sched tweaks
- cpufreq: some tweaks from i9300i 3.4 source
[29/03] Version 2.2.1 :
- arm: back to standard memset (better stability + less camera crashes on cm11)
- ramfs: add slimkat-based roms support
- ramfs: updated all included ramdisks
- Stweaks: enable all GPU freqs for all GPU steps
- Stweaks: enable all CPU freqs for min & max scaling freq
- Included some modules into kernel to reduce its size
This 2.2.1 version is labelled "I just can't stop loving you ..."
[23/03] Version 2.2.0 :
- cpufreq: updated ZZMoove to 0.8 (thx @ZaneZam & @Yank555)
- STweaks: added new zzmoove tunables and implemented all its internal profiles (10 profiles)
- Pegasusq: re enabled EARLYSUSPEND_HOTPLUGLOCK
- Now FINALLY the kernel has reached maturity with the best experience ever (battery and performance wise)
[16/03] Version 2.1.9 :
- updated to linaro gcc 4.8.3 build 2014.03 optimized for cortex-a9 (thx @Christopher83)
- cpufreq: Manage only online cpus
- smp: backport patches from linux 3.5 for better hotplugging
- CPU hotplug & writeback: Don't call writeback_set_ratelimit() too often
- touchscreen: use AndiP's touchboost control (thx @andiP)
- dyn_fsync: do not disable do_fsync()
- fs: implement ASYNC_FSYNC port from htc by @faux123
- Stweaks: added GoogyQ tab
[10/03] Version 2.1.8 :
- ARM: implement flush_cache_louis
- LZO: Update to latest version
- Pegasusq: disable EARLYSUSPEND_HOTPLUGLOCK
- cpufreq: introduce GoogyQ governor (ported from faux123 intellidemand) and set as default (incredibly smooth and battery friendly !!!)
- Rom choice at boot is now working by simply touching the screen (3 seconds delay)
[05/03] Version 2.1.7 :
- CM11: Updated ramdisk to latest build 04/03 (added telephony-msim to bootclasspath)
- Some minor internal tweaks
[01/03] Version 2.1.6 :
- back to gcc linaro 4.7.3 (giving better results and stability)
- Dynamic fsync re-added and activated by default
- Lots of mm & internal changes for stability and performance
- logger: reduce reserved memory
- battery: ignore unstable power & ignore safety margin are now switchable via Stweaks
- cpufreq: tweaked governors and re-added smartassV2
- block: tweaked schedulers & added bfq (thx @andiP)
- camera: hopefully fixed camera occasional crash
- linux: back to standard kernel naming showing proper version number
- Fixed some occasional apps crash (like antutu x & megapolis ...)
- gpu: using simpler gpu control (thx @andiP)
- Stweaks: Added Min CPU Lock control to CPU tab
- Stweaks: Added "Apply" button to governors tabs
- Stweaks: Added ZRAM switch to Misc tab (on/off for sammy roms only)
- Stweaks: Fine tuned pegasusQ & GPU default values
OUF !
[15/02] Version 2.1.5 :
- Patched to latest samsung source drop XXUGML3 :good:
- using gcc linaro 4.8.3 2014.02 optimized for cortex-a9 (thx @Christopher83)
- Added configurable led behavior + led fading support (thx @AndreiLux)
- Added MDNIE full control (thx @AndreiLux & @DerTeufel1980)
- hdmi: fix sound output not working
- fix TriangleAway support (thx @DerTeufel1980)
- sched: reduced latency for better responsiveness
- cpufreq: reverted hack preventing max freq override (so expect some 1.5 & 1.6 ghz in stats, but it's soooo smooth)
- fsync: completely removed dynamic fsync
- tweaked lowmemorykiller & mm
- fixed problem of wifi not working on some roms
- Added Carbon rom support
- Updated ramdisks
[19/01] Version 2.1.4 :
- Re-patched from scratch to linux 3.0.101
- mm: lot of changes to match 3.0.101
- arm: L1 cache optimization 2/2 : use correct L1 cache shift (5->6)
- busfreq: back to stock slope usage (correct scaling)
- wireless: Fix a memory leak
- mm/page_io: prevent keeping duplicated compressed pages in memory
- mali: Disable state_tracking
- battery: raised max charge current to 1100 mA (for USB and wireless)
PS: please confirm that you feel the performance boost (or not) !!!
[09/01] Version 2.1.3 :
- Updated gcc to linaro 4.8.3 (12.2013) :good:
- block: Update row scheduler & blk-core
- block: tweak cfq, deadline, sio, vr & zen schedulers
- ScoobyDoo sound: fix engine not activated
- random-char: raise read from 64 to 256 and write from 128 to 512
- battery: ignore charger unstable power
- rwsem: implement RWSEM_XCHGADD & steal writing sem (for better performance)
- arm: L1 cache optimization
- mmc: TriangleAway support & disable CRC (for better performance)
- wireless: reduce wakelock timeout ( x/4 )
- Enable USB OTG support
- Disable ALL Samsung Rooting Restriction Features
- Updated omni & cm11 ramdisks
- sammy43: raise compcache size from 300 to 400 mb
[29/12] Version 2.1.2 :
- Fully merged Update13 changes
- CM: fix camera video recording (ported from Googy-Max (thx Gokhanmoral)) :good:
- CM: Fix some camera crash due to firmware date
- pegasusq: add prev_cpu_wall_delta
- sched: add time-based average load
- Re-enable Touchboost control (ported from Googy-Max (thx Gokhanmoral))
- mach-exynos: Correct min_uV & max_uV limits for proper voltage control
- block: Add Zen scheduler (thx Yank555)
- Stweaks: fixed the apk install and moved it from system partition to data
- Some minor tweaks
IMPORTANT: Built-in recovery can't handle new update scripts of cm based roms (error 7) so PLEASE use @DerTeufel1980 recovery (downloads and how-to available in his thread)
[22/12] Version 2.1.1 :
- Stweaks: Add vibration intensity control to misc tab
- Stweaks: Correct tweaked abb values
- Stweaks: Moved undervolted and tweaked CPU/GPU/ABB to "battery" profile to keep "balanced" profile as close to stock as possible
IMPORTANT: Built-in recovery can't handle new update scripts of cm based roms (error 7) so PLEASE use @DerTeufel1980 recovery (downloads and how-to available in his thread)
[21/12] Version 2.1.0 :
- Cypress: make touchkeys backlight work on sammy & cm11 & temasek/omni
- char: add frandom support (thx @Yank555)
- Stweaks: do not install STweaks_Googy-Max if STweaks is already installed
IMPORTANT: Built-in recovery can't handle new update scripts of cm based roms (error 7) so PLEASE use @DerTeufel1980 recovery (downloads and how-to available in his thread)
[21/12] Version 2.0.9 :
- Patched to Samsung Update13 :good:
- Cypress: make touchkeys backlight work on sammy & cm11
- CPU undervolting implementation ported from Googy-Max :good:
- ABB implementation ported from Googy-Max :good:
- GPU control implementation ported from Devil's kernel (thx @DerTeufel1980 & @Yank555)
- cm11: fix for some cases of front camera crash (cm)
- cm11: make vibrator configurable
- cm11: fix battery gauge problem
- fix loss of baseband on sammy4.3
- Stweaks: ABB tweaked +GPU & CPU are ALREADY UNDERVOLTED (and stable )
IMPORTANT: Built-in recovery can't handle new update scripts of cm based roms (error 7) so PLEASE use @DerTeufel1980 recovery (downloads and how-to available in his thread)
[15/12] Version 2.0.8 :
- FULLY WORKING DUAL BOOTING Sammy4.3 / CM11/ Omni / Temasek (with r3p2 mali support)
- Compiled with GCC Linaro 4.8.2 :good:
- Bring back dual sound engines (ScoobyDoo / Wolfson)
- Fix MTP for dualboot
- cm11 : fix network arrows not showing correctly
- busfreq: correct usage of cpu load slope
- touchkey backlight: little modification for dualboot support
- Some minor tweaks
- @DerTeufel1980 recovery support (reboot choice)
IMPORTANT: Built-in recovery can't handle new update scripts of cm based roms (error 7) so PLEASE use @DerTeufel1980 recovery (downloads and how-to available in his thread)
[23/11] Version 2.0.7 :
- FULLY WORKING DUAL BOOTING Sammy4.3 / Temasek 4.4 v5 and above (with r3p2 mali support)
- zram: back to stock
- some mali changes
- Replace Boeffla sound engine with Wolfson sound engine (& added stweaks tab)
- cpufreq: renamed pegasusq to pegasusqstock and implement Googy-Max tweaked pegasusq
- mach-midas: cpu throttle from 800 to 1000MHz when reaching max thermal limit (thx @brujo55 for the advise)
- Reverted a lot of changes which were causing lags
Important: Dual booting choice at startup isn't working ! Please use stweaks to choose your defaultrom or to reboot directly to the desired rom
ATTENTION : Dualboot isn't working for now ...
[18/11] Version 2.0.6a :
- stweaks: add wireless charge rate
- some performance tweak
[18/11] Version 2.0.6 :
- mm: some more changes
- Added cpu topology & various sched tweaks
- Fixed zram settings not applied
[17/11] Version 2.0.5 :
- Add TriangleAway support
- Optimize read speed of schedulers (cfq, deadline, sio, vr)
- Add j4fs support
- Some more changes from XXUGMJA kernel (mm, lmk, mmc)
- Enable Cleancache & disable CONFIG_SCHED_AUTOGROUP
- Add Xpad support
- Add network filesystems support (nfs, cifs, sunrpc)
- zram: disable debugging & zram_for_android
- Stweaks: Zram is now configurable BUT disabled by default (RAM management is way better without it)
[14/11] Version 2.0.4 :
- Updated to latest XXUGMJA ramdisk & GPU driver
- Cpu OC support (up to 1600Mhz)
- Updated gcc compiler to 4.7.4 2013.10
WakeUp lag IS gone and battery drain IS normal !!! (please confirm)
[13/11] Version 2.0.3 :
- Implement Touch to Wake
- busfreq: Disable BUSFREQ_INTERLOCK_CPUFREQ (fly fly baby )
- earlysuspend: Remove zram conditional optimize_comp
- mm: back to stock memory management
WakeUp lag seems to be gone same as battery drain !!! (please report anyway)
[10/11] Version 2.0.2 :
- Zram: back to stock zram 300MB (compcache)
- Activated Unaligned memory access & neon & hardfloat support
- Implement forced fast charge (thx Yank555)
- fs: Enable AIO
- sched_features: Disable GENTLE_FAIR_SLEEPERS & enable ARCH_POWER
- busfreq: Use cpu_load_slope correctly
- sys: Remove "Samsung Rooting Restriction Feature"
- ramdisk (sammy4.3): Various tweaks and corrections
- STweaks: Various tweaks and corrections
[08/11] Version 2.0.1 :
- Wireless: Disable multicast on suspend & Allow mac adress change
- ExFAT as external module and loaded at boot
- Permanent TRIM
- Reverted dual sound system and switched to Boeffla sound 1.6.4 (use Boeffla sound app for settings)
- Page-writeback interval: screen on 0ms off 500ms
- Removed "Samsung Rooting Restriction Feature"
- Auto-root is now disabled by default
- Hopefully fixed drain issue and deepsleep problem
[08/11] Version 2.0.0 :
- Updated to linux 3.0.101 (EOL)
- Set fbearlysuspend via sysfs (for CRT animations)
- Added governors : Add ondemand-smartassV2-zzmoove-lulzactiveq-hotplug
- Added IO schedulers : row-sio-vr-fifo
- Tcp congestion methods : westwood-htcp-bic
- Raised charging currents
- Sound engines : Scoobydoo & Wolfson
- Updated to latest XXUGMJ9 ramdisk
- Auto-root (updated to latest su and supersu with daemon autorun)
- Auto install of Stweaks 2.0 (Googy-Max edition)
Another one for me ...
Why have only 2 when I can have 3 for me ???
First will try n let u know
Thnx googy
Edit: tried 2.0.0. Was very good. Battery backup was fine!
Smooth working..
Very fast.. though I didn't tried stock 4 3 kernel yet!
Now trying 2.0.1 good work mate
I'm a big fan of ur kernels.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Deep sleep problem solved?
this will be an excellent piece of work for sure ..goonna try it
ROM Compatibility
Just to be clear what you title edit means. I understand that Dual Boot isn't working yet but is the kernel compatible with CM10.2 just now or is it only Sammy roms.
Cheers
thx googy
but dl link dont work! !
regards
edit: dident see the testing state - sorry
Woohoo, finally! But like someone pointed out earlier the link does not work
Sent from my GT-I9300 using Tapatalk
cant wait to download
Thank u ,
and waiting for the stable one with the DUAL BOOTING
though i couldn't download it from the link above ?! ....
Looking forward to downloading this - (link doesn't work)
repeated again sr.
Thanks googy one more time.!!!! Keep up the good work!!!
Waiting for dualboot ))
Come on guys... Stop spamming the Thread... We ALL know right now Dual Boot doesn't work properly so stop writting about waiting for it, if it's fixed Googy will let us ALL know.
Also the link works fine, you can see XDA DB but Googy hasn't pushed the zip file yet so nothing to download there yet...
Please we are all excited but don't spam the thread just wait and reply if you have any kind of issues .
Thank you
Is this going to be a Sammy ROM only Kernel thread or are you working on making this work on CM10.2 also?
Great work as always
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MeGaByTe KernelAttention
/*
I'm not a developer, im taking effort to put more choices of kernel for our community.
This kernel is tweaked for my own taste.
Please do not request for more features because i want to ensure the stability of the kernel first.
And thank you for using this kernel.
*/
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
- Compiled with latest Built with latest custom Uber 5.2
- Updated Kernel Base With CM
- Bioshock governer
- Mako hotplug
- MSM hotplug
- O3 flag
- graphite flag
- dev/frandom
- fiops IO schedulers
- vibration strength control ( sysfs set to /sys/vibrator/pwmvalue for compatibility with Trickster )
- Bricked hotplug
- Init.d Colour Calibration at bootup thanks to @Gustavo_s
- Faux Sound Control
- ZEN, SIO, FIOPS, VR IO schedulers
- Intelli Demand governor
- intelli Active governor
- Intelli Hotplug
- Intelli Thermal V2
- yankactive governor
- impluse governor
- smartmax governer
- adreno_idler driver
- enable zswap,frontswap ,vnswap
- usb fast charge added
- cpu voltage control added
- merged f2fs from motorola
- added Fsync from hTc
- added simple governer for gpu
- Enabled all kind Advance TCP
- MSM_Limiter by @neobuddy89 - More like a Swiss army knife! adds Per-Core Functionality!
- Linux 3.14 rc1 lockless ZRAM backported!
- crypto lib optimization
- ARM Cortex-A15 specific optimization
- exFAT support (for OTG)
- patches to reduce kernel latencies for network, fs
- selinux update
- VFAT, MM tweaks
- over 350+ patches!
- added core scheduler update
- backported 3.12+ kernel scheduler features
- fixed old cpufreq bug
- added LZ4 compression (faster than LZO)
- added various minor kernel bug fixes from CAF/kernel.org
- more accurate load calculations (better battery/performance)
- added mutex optimization (better multi-tasking)
- scheduler optimization (smoother multi-tasking)
- SELinux optimization (faster SELinux!)
- enabled XZ compression (reduce kernel size)
- UV control
- ARM unaligned access enabled
- updated LZO algorithms (used by many including crypto, zram/zcache etc)
- updated libraries with optimized kernel functions
- built-in snakecharmer (cpu limit from boot)
- optimized KSM
- oom updated to linux 3.14+
- lowmemorykiller optimization
- core sched optimization
- kswapd patch from mainline
- tuned kernel page_alloc for better multitasking
Pls Read This before flashing:
You need ROM's default kernel before flashing this as this kernel makes use of AnyKernel 2 by @osm0sis. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel) Credits to @attack11 for some part of install script.Read FAQ's and changelogs in 2nd post. THIS KERNEL COMES FINE TUNED OUT OF THE BOX.
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
PLS DON'T MIRROR THE LINKS
Recommended app:
Kernel Adiutor
I would like to say thanks to @Gustavo_s I used his kernel source as my base Thanks Mate @faux123 @RenderBroken @arter97
@franciscofranco @hurtsky for his commits
@Flashhhh @DC07 @zwliew @neobuddy89 @smartAgent47 for poster and many more ..last but not the least Cyanogen Team
XDA:DevDB Information
[Kernel][SM-4.9][CM/AOSP][5.1.X] MeGaBYTe_Kernel_r1 [Colour Calibration] [16/10/15], Kernel for the Moto X
Contributors
Megatron007
Source Code: https://github.com/Megatron007/ghost
Kernel Special Features:
Version Information
Status: Beta
Created 2015-10-16
Last Updated 2015-10-16
Download:
https://renderserver.net/browse?path=Megatron007/Megabyte/ghost
Looking for changelogs??
https://github.com/Megatron007/ghost/commits/mega-new Here they are!!!
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on all CM12/12.1 and AOSP roms. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
Changelogs -
7/11/15
MeGaByTe_Kernel_r4
-Fixed Colour calibration reset issue
- Compiled with Lz4 compression and thanks to @tycoo for lz4 updates
29/10/15
MeGaByTe_Kernel_r3(Based on faux kernel)
- MSM_Limiter by @neobuddy89 - More like a Swiss army knife! adds Per-Core Functionality!
- Linux 3.14 rc1 lockless ZRAM backported!
- crypto lib optimization
- ARM Cortex-A15 specific optimization
- exFAT support (for OTG)
- patches to reduce kernel latencies for network, fs
- selinux update
- VFAT, MM tweaks
- over 350+ patches!
- added core scheduler update
- backported 3.12+ kernel scheduler features
- fixed old cpufreq bug
- added LZ4 compression (faster than LZO)
- added various minor kernel bug fixes from CAF/kernel.org
- more accurate load calculations (better battery/performance)
- added mutex optimization (better multi-tasking)
- scheduler optimization (smoother multi-tasking)
- SELinux optimization (faster SELinux!)
- enabled XZ compression (reduce kernel size)
- UV control
- ARM unaligned access enabled
- updated LZO algorithms (used by many including crypto, zram/zcache etc)
- updated libraries with optimized kernel functions
- built-in snakecharmer (cpu limit from boot)
- optimized KSM
- oom updated to linux 3.14+
- lowmemorykiller optimization
- core sched optimization
- kswapd patch from mainline
- tuned kernel page_alloc for better multitasking
24/10/15
MeGaByTe_Kernel_r2
- Compiled using Uber 5.2
- Updated base from CM
- Bioshock governer
- Mako hotplug
- MSM hotplug
- O3 flag
- graphite flag
- dev/frandom
- fiops IO schedulers
- vibration strength control ( sysfs set to /sys/vibrator/pwmvalue for compatibility with Trickster )
- Bricked hotplug
16/10/15
MeGaByTe_Kernel_r1
- Compiled with latest Built with latest custom Sabermod 4.9
- Init.d Colour Calibration at bootup thanks to @Gustavo_s
- Faux Sound Control
- ZEN, SIO, FIOPS, VR IO schedulers
- Intelli Demand governor
- intelli Active governor
- Intelli Hotplug
- Intelli Thermal V2
- yankactive governor
- impluse governor
- smartmax governer
- adreno_idler driver
- enable zswap,frontswap ,vnswap
- touch improved
- usb fast charge added
- cpu voltage control added
- merged f2fs from motorola
- added Fsync from hTc
- added simple governer for gpu
- Enabled all kind Advance TCP
Cant wait to dig through your source and check it out! Looks good so far!. Keep it up.
RenderBroken said:
Cant wait to dig through your source and check it out! Looks good so far!. Keep it up.
Click to expand...
Click to collapse
Thanks a lot Need to Improve this kernel more and more in Future Releases
Can you make one for stock rom too if possible?:fingers-crossed:
DaRkRhiNe said:
Can you make one for stock rom too if possible?:fingers-crossed:
Click to expand...
Click to collapse
I dont use stock rom , So i dont
Download and flash, thanks @Megatron007 suport of ghost
@Megatron007 you rock bro'!
Thanks for the effort! I'm gonna probe right now!
The selinux is permissive?
julianenciso93 said:
The selinux is permissive?
Click to expand...
Click to collapse
Enforcing
@Megatron007 excuseme but i see in kernel adiutor with your RR ROM that the kernel doesn't have any customization that you recommended in you BLISSPOP ROM... that's ok? :/
Thanks for your support!
CsR0501 said:
@Megatron007 excuseme but i see in kernel adiutor with your RR ROM that the kernel doesn't have any customization that you recommended in you BLISSPOP ROM... that's ok? :/
Thanks for your support!
Click to expand...
Click to collapse
can u ellobrate it ? i didnt get it
@Megatron007 this is awesome kernel!! The colour calibration is perfect to screen burn-in, really really thanks bro is very smooth and battery is good!!
PD: i not touch nothing in kernel auditor
Megatron007 said:
can u ellobrate it ? i didnt get it
Click to expand...
Click to collapse
Excuse me... I don't speak (write) english very well
You commented a type of configuration for kernel in your BLISSPOP ROM thread (http://forum.xda-developers.com/showpost.php?p=63212087&postcount=41)... but in MeGaByTe kernel i don't see that configuration... Is this ok?
CsR0501 said:
Excuse me... I don't speak (write) english very well
You commented a type of configuration for kernel in your BLISSPOP ROM thread (http://forum.xda-developers.com/showpost.php?p=63212087&postcount=41)... but in MeGaByTe kernel i don't see that configuration... Is this ok?
Click to expand...
Click to collapse
Its there in this kernel too + extra governers and i/o
CsR0501 said:
Excuse me... I don't speak (write) english very well
You commented a type of configuration for kernel in your BLISSPOP ROM thread (http://forum.xda-developers.com/showpost.php?p=63212087&postcount=41)... but in MeGaByTe kernel i don't see that configuration... Is this ok?
Click to expand...
Click to collapse
kernel settings are already set as default, I have not touched anything and everything is going great
julianenciso93 said:
kernel settings are already set as default, I have not touched anything and everything is going great
Click to expand...
Click to collapse
After flashing i don't see any configuration in kernel adiutor... do you?
CsR0501 said:
After flashing i don't see any configuration in kernel adiutor... do you?
Click to expand...
Click to collapse
Send me ss of it
Megatron007 said:
Send me ss of it
Click to expand...
Click to collapse
Same happened to me. Re-flashed Blisspop ROM + Kernel as per OP instructions. There is nothing new within kernel auditor options, in fact very basic options and no color calibration script under init.d. TIA
Sent from my Moto XT1053 powered by Tapatalk
This kernel is for LG G4 H815 ONLY !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features :
GoogyMax Kernel for LG Firmwares
- Based on 20A LG MM Sources and synced with V20D source drop
- Updated ramdisk to V20D
- Patched to latest Linux 3.10.96
- Compiled with toolchain gcc Linaro 4.9.3
- Auto-root included
- Busybox included
- ExFAT support
- Dynamic FSync support
- SELinux set to permissive
- A lot of changes and tweaks for better performance & battery life
GoogyMax Kernel for CM13
- Based on latest cyanogenmod kernel sources
- Patched to latest Linux 3.10.96
- Compiled with toolchain gcc Linaro 4.9.3
- ExFAT support
- Dynamic FSync support
- SELinux set to permissive
- A lot of changes and tweaks for better performance & battery life
- MORE TO COME ...
Thanks :
The Beta Team : @FadeFx
- LG : For the code source
- Cyanogenmod : For the source code
- All the talented devs I cherry-picked their commits (Proper credits in my github)
- @qrashers for the Googy-Max Kernel logo & user / betatester signatures
- THE WONDERFUL XDA COMMUNITY !!!
Sources : https://github.com/googyanas/GoogyMax-G4
Signature for users :
Kernel for LG firmware - Downloads & Changelogs
GOOGYMAX KERNEL FOR LG Firmware
[14-FEB] Version 1.7 :
~ all details and credits in github ~
- fs: implement Dynamic FSync 2.0 (thx andip71)
- fs: disabled Async FSync
- various tweaks (mmc - thermal - devfreq - fs writeback)
[05-FEB] Version 1.6 :
~ all details and credits in github ~
- Patched to latest Linux 3.10.96
- cpufreq: cpuboost little tweak for more battery saving
To all GoogyMax kernel users: If you're tempted by disabling logd service to fix battery drain, you should know that it's not necessary with GoogyMax kernel as it was already disabled since some versions ago !
[29-JAN] Version 1.5 :
~ all details and credits in github ~
- fs: Asynchronous Fsync from HTC
- arm64: memory utilities optimization
- various patches to gain more smoothness (cpufreq, block, lowmemorykiller ...)
- Updated ramdisk to V20D
[25-JAN] Version 1.4a :
~ all details and credits in github ~
- Fixed and tested Bluetooth & FM Radio & Exfat
[24-JAN] Version 1.4 :
~ all details and credits in github ~
- WORKING NATIVE EXFAT SUPPORT :good: :good:
- Patched to latest Linux 3.10.95
- Completely disabled ZRAM, ZSMALLOC & SWAP
- random: boost entropy
- wireless: reduce wakelocks by /4
- gcc: tune flag for big.Little architecture
[22-JAN] Version 1.3 :
~ all details and credits in github ~
- Synced with LG v20d source drop :good: :good:
- Some patches to reduce lags & improve battery life (cpufreq, thermal)
- cpufreq: disable cpufreq_waver (removed anyway by v20d)
- devfreq: Use high priority workqueue
- arm64: add seccomp support
- arm64: add ARM64_ERRATUM_843419
- arm64: add support ARCH_SUPPORTS_ATOMIC_RMW
- mm: increase VM_MIN_READAHEAD from 16 to 32
[28-DEC] Version 1.2 :
~ all details and credits in github ~
- finally fixed MM lags and slowdowns ( + back to same battery life as with lollipop !!! ) :good: :good: :good:
- fs: hopefully fixed exFat support
NO MORE NEED TO DOWNGRADE TO LOLLIPOP !!! ( at least for me )
[24-DEC] Version 1.1 :
~ all details and credits in github ~
- block: update bfq to v7r8 and made it default scheduler
- fs: add exFat support
- sched: enable autogroup
- defconfig: disable ZRAM completely
- cpufreq: Introduce new relation for freq selection
- cpufreq: tune cpu & gpu target load values
- defconfig: include all tcp congestion modes
- defconfig: (experimental) enable display DFPS & VSYNC_SKIP
[14-DEC] Version 1.0 :
~ all details and credits in github ~
- Based on 20A LG MM Sources
- Patched to latest Linux 3.10.94
- Compiled with toolchain gcc Linaro 4.9.3
- Auto-root included
- Busybox included
- SELinux set to permissive
- A lot of changes and tweaks for better performance & battery life
PLEASE DO NOT MIRROR !!!
Kernel for CM13 - Downloads & Changelogs
GOOGYMAX KERNEL FOR CM13
[18-FEB] Version 1.7.1a :
~ all details and credits in github ~
- fixed flashlight button disappearing from notification drawer
[16-FEB] Version 1.7.1 :
~ all details and credits in github ~
- updates from lg v20d source (time - sched - soc - camera_v2 - leds - thermal - clk - hwmon - dts ...)
- some minor tweaks
[14-FEB] Version 1.7 :
~ all details and credits in github ~
- fs: implement Dynamic FSync 2.0 (thx andip71)
- fs: disabled Async FSync
- various tweaks (mmc - thermal - devfreq - fs writeback)
- updated ramdisk to 14feb build
[05-FEB] Version 1.6 :
~ all details and credits in github ~
- Based on latest cyanogenmod kernel sources
- Patched to Linux 3.10.96
- Synced with GoogyMax 1.6 (all patches and tweaks included)
PLEASE DO NOT MIRROR !!!
thanks . but flash how? twrp and that all? wipe something after? etc etc
shudoha said:
thanks . but flash how? twrp and that all? wipe something after? etc etc
Click to expand...
Click to collapse
It's a zip flashable via twrp. No wipe needed. Just flash and enjoy
Envoyé de mon LG-H815
Happy to see you here friend, excellent news!!! I will test it. Any project to make an AOSP kernel?
Thanks a lot
sayou94 said:
Happy to see you here friend, excellent news!!! I will test it. Any project to make an AOSP kernel?
Thanks a lot
Click to expand...
Click to collapse
We got there already? [emoji14] Surely aosp kernel will come but only when cm13 is mature enough.
Envoyé de mon LG-H815
googy_anas said:
We got there already? [emoji14] Surely aosp kernel will come but only when cm13 is mature enough.
Envoyé de mon LG-H815
Click to expand...
Click to collapse
Thanks friend, I want to flash AOSP rom but i need a solid custom kernel for it. I used your kernel for the note 4 and it was excellent!!!!
Hey googy: Noticed a bug with my external sd-card. Don't know how the phone is formatting the sd-card, but even formatting several times, it won't get recognized. Default kernel is fine. Guess, it will get formatted as exFAT and maybe you (currently) don't have exFAT included? Am I right?
Thanks anyways for your time and all the things in the past. I really appreciate your work.
P.S.: Don't mind my signature. I am on 20B .
Hey welcome here. I used your kernel on sgs3
:good: cheers
MickyFoley said:
Hey googy: Noticed a bug with my external sd-card. Don't know how the phone is formatting the sd-card, but even formatting several times, it won't get recognized. Default kernel is fine. Guess, it will get formatted as exFAT and maybe you (currently) don't have exFAT included? Am I right?
Thanks anyways for your time and all the things in the past. I really appreciate your work.
P.S.: Don't mind my signature. I am on 20B .
Click to expand...
Click to collapse
Thanks for taking the time to try the kernel.
Exfat isn't included yet but is planned for next release
Envoyé de mon LG-H815
Excuse me guys, please re-download 1.0 version as I just corrected a little problem affecting some modules loading (mainly bluetooth ...)
Another kernel wow thank you!
Future come faux sound support?.
Would this work on a Lollipop based ROM at all? Or does it have to be MM?
Adam86 said:
Would this work on a Lollipop based ROM at all? Or does it have to be MM?
Click to expand...
Click to collapse
Considering the sources are 20A which is MM, there's your answer
Trying it out but gives to much battery drain.
Will wait for a new release more optimized and with more features.
Keep the good work.
patalao said:
Trying it out but gives to much battery drain.
Will wait for a new release more optimized and with more features.
Keep the good work.
Click to expand...
Click to collapse
Sorry to hear that, but I am getting opposite results as my battery lasts noticeably longer with same usage.
Please check your init scripts or tweaks and consider checking after at least one charge cycle
Envoyé de mon LG-H815
I`m using Genisys 3.4 with superxe kernel,with no scripts and the only mods are greenify,powernap.
I just installed your kernel and wiped cache and dalvik.
But i`ll give it another try on your next update.
Thanks for bringing another kernel for our phones.
Actually @BySezerSimsek in Genisys Rom uses LS scripts. They are from L SPEED. I am using the same firmware.
I know, but I deleted them all
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my new X-Infinity Kernel for the 2015 Moto E LTE. It's based off the CyanogenMod kernel available on GitHub. Flash it using TWRP. Bug reports and contributions are welcome.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Governos
PERFORMANCE
POWERSAVE
USERSPACE
ONDEMAND
INTERACTIVE
CONSERVATIVE
IMPULSE
LIONFISH
I/O schedulers
NOOP
DEADLINE
ROW
CFQ
FIOPS
BFQ
ZEN
SIOPLUS
TRIPNDROID
Special Feactures
Double Tap Wake (DT2W) Add in the next build
More Feactures
Powered by Ubuntu 15.04 x86_64
LED notification support
Moderately undervolted
Updated to Linux 3.10.94
Synced with latest CodeAurora changes
Improved memory caching backported from Linux 3.15
Improved storage performance
Optimized ARM crypto routines
Updated f2fs and WiFi drivers
KCAL MDP5 colour control (by savoca)
Improved zRAM backported from Linux 4.1
Compiled with Linaro GCC 4.9 and optimized for Cortex A53
Stripped down and optimized configuration
Network speedup tweak
Reduce swappiness to 30
Optimized SLUB
Asynchronous I/O latency to a solid-state disk greatly increased
Disabled MMC CRC check
Compatible with Kernel Adiutor, Universal Kernel Manage and others
And More
X-Infinity For The Moto E 2015 LTE
Old versions
X-Infinity R03 For surnia
X-Infinity R02 For surnia
X-Infinity R01 For surnia
Installation Instructions
My suggested install procedure:
Boot into TWRP (make sure you have a suitable ROM installed)
Flash my kernel zip.
Reboot into Android.
@squid2
@casper1982 thanks for banner desing
@Tutodio thanks for testing
@Savoca
@faux123
@xperiafan13
@Flashhhh
@Christopher83
@eng.stk
Screenshots
XDA:DevDB Information
X-Infinity Kernel, Kernel for the Moto E 2015
Contributors
Carlos Arriaga
Source Code: https://github.com/KernelXInfinity/android_kernel_motorola_msm8916
Kernel Special Features:
Version Information
Status: Stable
Created 2016-01-08
Last Updated 2016-04-04
- changelog -
Code:
[B][SIZE="4"][COLOR="Purple"]X-Infinity R16 / 2016-04-4[/COLOR]
- Merged CM changes
- Added lionfish governor by squid2
- Added system wide power efficient workqueues
- sched/fair: Implement fast idling of CPUs when the system is partially loaded
- block: bfq: set IOPS mode by default with slice_idle set to 0
- lib/memcopy: use glibc version
- Optimized Square root algorithm
- Fixed low/poor call audio
- Security fix for CVE-2016-0728
- Optimize apply_slack() for size and speed --thanks to varunchitre15
- Enabled pipe flag
- Makefile : use std=gnu89
- block/deadline: tweaked for better performance
-Merged CM changes
- Added Impulse governor(fine tuned for osprey)
- arm/dt: msm8916: Schedule mmcqd on idle CPU
- arm/dts: msm8916: enable bam_dmax fast shutdown
- mmc: clk_scaling: set scale_down_in_low_wr_load to 1 by default for more performance
- Added toggle for crc check
- Optimized slub & zlib changes
- cpufreq: Ondemand: eliminate the deadband effect
- Cpufreq & devfreq patches
- Updated to Motorola Marshmallow sources
- Updates from CAF LA.BR.1.2.7_rb1.1
- Security and bug fixes from Linux 3.12.52
- Compatible with Marshmallow stock ROM
- More than a dozen CAF security fixes
- Miscellaneous bug fixes
- Somewhat smoother animations
- Added Intelliplug v4.0 by faux123
- Add Intelliactive & Bluactive governor
- block: Make CFQ default to IOPS mode on SSDs
- Added toggles to disable wlan wakelocks
- Makefile: optimize & cleanup
- Makefile: tell gcc optimizer to never introduce new data races
- Added Powersuspend v1.5 driver
- msm: mdss: add powersuspend hooks
- Dynamic Fsync 2.0 support for 3.10 kernels
- sched: enable HMP-aware task placement logic
- Disable more debug features
- Added adreno idler v1.1
- Merged updates from CM
- ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
- rcu: squashed updates from CAF
- Makefile: improve decompress performance during boot up process
[/SIZE][/B]
[B][SIZE="4"][COLOR="Purple"]X-Infinity R04 / 2016-01-27[/COLOR]
Add Governos
- Darkness
- zzmoove
- impulse
- intellidemand
Add Hotplugs
- Zen Decision
- ASMP
- MSM[/SIZE][/B]
[B][SIZE="4"][COLOR="Purple"]X-Infinity R03 / 2016-01-25[/COLOR]
Fixed low/poor call audio
Security fix for CVE-2016-0728
Add IOSHED thanks @Flashhhh
- ZEN
- SIO
- SIOPLUS
- TRIPNDROID
SELinux Update 3.10.95[/SIZE][/B]
[B][SIZE="4"][COLOR="Purple"]X-Infinity R02 / 2016-01-23[/COLOR]
merlin: test#1
osprey: test#1
surnia: Test #1
merlin: enable governors …
Optimize apply_slack() for size and speed --thanks to varunchitre15
Added frandom 3/3 …
Added frandom 2/3 …
Added frandom 1/3 …
Revert "Initial port fastchanger 3/5 "
Revert "Initial port fastchanger 2/5 "
Revert "Initial port fastchanger 1/5 "
Initial port fastchanger 3/5
Initial port fastchanger 2/5
Initial port fastchanger 1/5
fixed dt2w
Enabled pipe flag
Makefile : use std=gnu89
block/deadline: tweaked for better performance
merlin: add local version
Fix name
Enabled tcp fast open functionality
Reduce swappiness to 40
XZ: Optimize Sfck Compression 2/2
XZ: Optimize Sfck Compression 1/2
selinuxfs.c: SELinux permissive mode 2/2
hooks.c: SELinux permissive mode 1/2
merlin: enable DT2W
defconfig: new defconfig merlin
MARSHMALLOW ONLY
Updated to Motorola Marshmallow sources
Updates from CAF LA.BR.1.2.7_rb1.1
Security and bug fixes from Linux 3.12.52
Compatible with Marshmallow stock ROM
More than a dozen CAF security fixes
Miscellaneous bug fixes
Somewhat smoother animations
Experimental support for merlin[/SIZE][/B]
[B][SIZE="4"][COLOR="Purple"]X-Infinity R01 / 2016-01-08[/COLOR]
surnia: enable governors …
osprey: enable governors …
power: process: drecrease time to enter sleep
Reduced lag
Disabled MMC CRC check
VM_MAX_READAHEAD set to 1024 kbytes
Optimized SLUB
Asynchronous I/O latency to a solid-state disk greatly increased
Enabled Arch power and Disabled GFS
Dirty_ratio tweaks
Disabled noatime_and_nodiratime
kernel/sched/fair: reduce latency
Reduced_VFS_cache_pressure
Added some governors
Added some governors 6/8
Added some governors 5/8
Added some governors 4/8
Added some governors 3/8 …
Added some governors 2/8 …
Added some governors 1/8 …
Network speedup tweak
surnia: add local version
osprey: add local version
surnia: enable DT2W
osprey: enable DT2W
Starting port DT2W for osprey,surnia,merlin. 6/6
Starting port DT2W for osprey,surnia,merlin. 5/6
Starting port DT2W for osprey,surnia,merlin. 4/6
Starting port DT2W for osprey,surnia,merlin. 3/6
Starting port DT2W for osprey,surnia,merlin. 2/6
Starting port DT2W for osprey,surnia,merlin. 1/6 …
defconfig: new defconfig surnia
defconfig: new defconfig osprey
[URL="http://forum.xda-developers.com/moto-e-2015/orig-development/squid-kernel-moto-e-lte-2015-t3072209"]olds changes from squid kernel[/URL][/SIZE][/B]
- FOR CM13 ONLY!!!
- Updated to Linux 3.10.94
- Updated to LA.BR.1.1.3_rb1.41
- Updated zRAM
- Improved memory caching scheme from Linux 3.15
- Optimized memory allocation and management
- Optimized CPU scheduler
- Optimized performance event tracking
- Fixed some cpufreq races
- Minor bug fixes
- Patched Pronto CR-930533 vulnerability
- Fixed possible use-after-free in zRAM
- Updated to Linux 3.10.93
- Compiled with Linaro GCC 5.1
- Updated to Linux 3.10.92
- Updated to CAF LA.BR.1.1.3_rb1.36
- Updated to Moto Maxx 2 Kernel
- Security and stability improvements
- Fixed r10c SELinux regression on stock ROM
- Fixed encryption
- Patches for Android 6.0 compatibility
- Fixed move app to SD card issue
- Cleaned up DTBs to reduce size
- Added KCAL colour control (by savoca)
- Added optimized crypto routines for ARM
- Updated to Linux 3.10.90
- Optimized memory performance
- General cleanup and optimization
- Updated to lux kernel sources
- Updated to Linux 3.10.89
- Updated to LA.BR.1.1.3_rb1.32
- Small tweaks and optimizations
- Updated to Linux 3.10.88
- Updated to LA.BR.1.13_rb1.29
- Improved zRAM backported from Linux 4.1
- WiFi driver background scan changes
- Added adaptive low memory killer
- Included the WLAN NV patch I had posted earlier
- Downgraded WiFi driver to LA.BR.1.1.2_rb1.18
- This actually fixes the WiFi crashes :D
- Added LED notification support
- Updated WiFi driver to LA.BR.1.2.4_rb1.14
- Maybe this will fix bootloop issues for affected users
- Updated everything to LA.BR.1.1.3_rb1.25
- There were some interesting WLAN driver changes
- Maybe this will fix WiFi bootloop issue in r7c
- Updated WiFi driver to LA.BR.1.1.3_rb1.23
- Maybe it will fix DHCP issues with certain routers
- New universal flashing script
- Works on any surnia variant and ROM
- Updated to Linux 3.10.87
- Updated to Qualcomm LA.BR.1.1.3_rb1.24
- Updated to Motorola MMI-LPI23.72-9
- Added a few extra WiFi driver options
- Added CPU touch booster feature
- Rebased for use on 5.1 ROMS ONLY
- Updated to Qualcomm's LA.BR.1.1.3_rb1.21 release
- Updated to Linux 3.10.84
- Updated WiFi drivers
- Added my new and original Lionfish CPU governor
- Added Conservative CPU governor
- Added faux123's IntelliPlug CPU hotplug implementation
- Added BFQ IO scheduler
- Numerous bug fixes
- Updated to Linux 3.10.75
- Added FIOPS I/O scheduler
- Updated f2fs drivers backported from Linux 4.0
- Milder undervolt for improved stability and compatibility
- Uses full Boost Mobile ramdisk for CDMA variant
- Updated to Linux 3.10.74
- Milder undervolt to better support all devices
- Cleaned up defconfig and device tree
- Various minor bugfixes
- Fixed still picture taking with front-facing camera
- Initial public release
Reserved
Will we see this on the Otus ?
Just a fair warning to anyone who might get the idea to flash this on stock rom. DO NOT, I REPEAT, DO NOT TRY IT! You will lose your baseband! (I know because i was dumb and tried it, and had to flash factory firmware to fix it!)
KazuDante said:
Will we see this on the Otus ?
Click to expand...
Click to collapse
I do not think, I sold my otus and buy a surnia. but perhaps eventually otus.
hydroman202 said:
Just a fair warning to anyone who might get the idea to flash this on stock rom. DO NOT, I REPEAT, DO NOT TRY IT! You will lose your baseband! (I know because i was dumb and tried it, and had to flash factory firmware to fix it!)
Click to expand...
Click to collapse
No work on Stock LP, only works roms base CM13 or possibly AOSP-CAF
Carlos Arriaga said:
No work on Stock LP, only works roms base CM13 or possibly AOSP-CAF
Click to expand...
Click to collapse
I Actually switched to cm 13, It is a very nice kernel! Extremely smooth! Great Work!
hydroman202 said:
I Actually switched to cm 13, It is a very nice kernel! Extremely smooth! Great Work!
Click to expand...
Click to collapse
thank you for taking a chance.
Carlos Arriaga said:
thank you for taking a chance.
Click to expand...
Click to collapse
Your welcome. Thanks for making this!
Hey guys kernel work perfect in the AOSP-CAF by scritch.
I can also confirm that it works on caf 6.0 by @scritch007
Sent from my surnia using Tapatalk
For stock rom will be release?
hey one question where is the file of dt2w ? i cant see https://github.com/TecnoDV/android_...e/squid_marshmallow/drivers/input/touchscreen
dt2w when enable it and after rebooting, touchscreen do not respond anymore.
i'm on cm13
pixiebob said:
dt2w when enable it and after rebooting, touchscreen do not respond anymore.
Click to expand...
Click to collapse
I've had the issue, where the touch is forced on the recent button and screen was also unusable. Restarting fixed the problem.
Sent from my aosp_surnia using Tapatalk
rajit said:
hey one question where is the file of dt2w ? i cant see https://github.com/TecnoDV/android_...e/squid_marshmallow/drivers/input/touchscreen
Click to expand...
Click to collapse
my internet is slow, not yet upload the changes.
jamaniek said:
I've had the issue, where the touch is forced on the recent button and screen was also unusable. Restarting fixed the problem.
Sent from my aosp_surnia using Tapatalk
Click to expand...
Click to collapse
thanks i will try maybe later
Yea i just had one problem with touch not working correctly but after a force restart it have been working good and DT2W is really nice.
Im using CM13
Excellent work @CarlosArriaga