Hey guys! Unfortunately I bricked my new HTC Desire 626s while fiddling around with xposed for lollipop after successfully rooting the phone and installing cyanogen recovery. I think if I flash the stock rom on the phone through either adb or cyanogen recovery I can unbrick it, but I have been unsuccessful in finding this file on the internet. Would anyone care to give me a link or upload the stock firmware/rom of this phone? It would really help me out, thank you!
You have to make sure the firmware is the same version or newer than the one currently on the phone as well as which carrier or region the phone is from. Without that, can't provide the correct file to download.
es0tericcha0s said:
You have to make sure the firmware is the same version or newer than the one currently on the phone as well as which carrier or region the phone is from. Without that, can't provide the correct file to download.
Click to expand...
Click to collapse
Umm.. Okay so I guess I'll give you my phone's info? WAIT DOES THIS MEAN YOU CAN PROVIDE A DOWNLOAD!? IM SO EXCITED, UH OK HERE
- HTC Desire 626s
- Metro PCS USA
- Current firmware version : 1.06.1550.7
ANYTHING ELSE?? IF YOU CAN GIVE ME THAT DOWNLOAD LINK, MY MOM WONT KILL ME:crying::crying::crying: (she's really pissed :laugh Thank you btw!
Was just thinking about this...if you soft bricked after attempting to install Xposed, and nothing else, you should be able to get out of it by flashing the xposed uninstaller zip. If that does not work, stay tuned to this thread http://forum.xda-developers.com/desire-626/help/htc-desire-626s-root-recovery-t3169169 as there are some others at the end of the thread in a similar predicament. It does not appear that there is an official RUU yet for the Metro version, only the T-Mobile version, and they are not compatible. Just try the uninstaller zip first because that would be the easiest thing to try and should only take a couple of minutes.
es0tericcha0s said:
Was just thinking about this...if you soft bricked after attempting to install Xposed, and nothing else, you should be able to get out of it by flashing the xposed uninstaller zip. If that does not work, stay tuned to this thread http://forum.xda-developers.com/desire-626/help/htc-desire-626s-root-recovery-t3169169 as there are some others at the end of the thread in a similar predicament. It does not appear that there is an official RUU yet for the Metro version, only the T-Mobile version, and they are not compatible. Just try the uninstaller zip first because that would be the easiest thing to try and should only take a couple of minutes.
Click to expand...
Click to collapse
I tried this before my phone got ****ed and it worked:good:! If you can help me dude that'd be great. After uninstalling or changing some stuff in priv-app on my HTC Desire 626s, when I rebooted, it would just stay in a boot loop with the optimizing app message. Any ideas?
What did you uninstall? I would ask for those apps in that thread and use a flashable zip and install via TWRP. You might also try clearing caches and/or resetting the phone again. It DOES take a long time to optimize the apps after wiping stuff as well, so sometimes it is a matter of being patient.
This is why I ALWAYS recommend to freeze apps vs uninstalling. Uninstalling them does not get you any usable space back, so there is no benefit, but it can cause issues if you do need the apps, as you can see...
es0tericcha0s said:
What did you uninstall? I would ask for those apps in that thread and use a flashable zip and install via TWRP. You might also try clearing caches and/or resetting the phone again. It DOES take a long time to optimize the apps after wiping stuff as well, so sometimes it is a matter of being patient.
This is why I ALWAYS recommend to freeze apps vs uninstalling. Uninstalling them does not get you any usable space back, so there is no benefit, but it can cause issues if you do need the apps, as you can see...
Click to expand...
Click to collapse
I believe I uninstalled the dialer and its service in an attempt to replace them with the stock lollipop ones. How do you install TWRP on this phone? My mom has the same phone and its also rooted but hers actually works so I was thinking since TWRP has a nandroid backup setting, I could simply do a nandroid backup on hers and flash it on to mine to see if it will boot up. What do you think? And for the optimizing apps thing, it would finish optimizing, say starting apps, reboot and then optimize again and repeat. Thanks for the help btw, I really hope we can fix this.
You have to unlock the bootloader @ htcdev.com and use fastboot to install TWRP. And yes, that would work, as long as they are on the same software update. Know that when you unlock the bootloader, it will automatically wipe the phone, so make sure she has everything backed up to Google, the PC, etc.
es0tericcha0s said:
You have to unlock the bootloader @ htcdev.com and use fastboot to install TWRP. And yes, that would work, as long as they are on the same software update. Know that when you unlock the bootloader, it will automatically wipe the phone, so make sure she has everything backed up to Google, the PC, etc.
Click to expand...
Click to collapse
Do you have the TWRP recovery file for me to download?
I'm afraid I'm a bit confused... How did you install Xposed and the Uninstaller without a custom recovery? Upon further searching, there doesn't appear to be a version of TWRP for your phone that I could find. Just figured you already had one. You must be on Kit Kat and not Lollipop?
es0tericcha0s said:
I'm afraid I'm a bit confused... How did you install Xposed and the Uninstaller without a custom recovery? Upon further searching, there doesn't appear to be a version of TWRP for your phone that I could find. Just figured you already had one. You must be on Kit Kat and not Lollipop?
Click to expand...
Click to collapse
I installed Cyanogen recovery before flashing Xposed and the uninstaller. I thought you had the TWRP recovery img for my phone which is why I asked. I believe some developers are working on a Clockworkmod recovery for this phone which is basically the same thing as TWRP recovery, right? Anyways I guess I just have to wait until that comes out, but I was wondering if anyone who somehow got a hold of the stock rom could upload it for us to use. It would be really helpful
ClockWorkMod is the recovery that Cyanogen uses. That is able to perform nandroid backups as well.
You have to unlock the bootloader, then if you messed up your stock rom and you've updated it to something newer than what Samsung gives for a stock recoverable rom, you must first use the tmobile vers, let it fail, and then use metropcs vers.
If you messed up recovery or anything it will all go back to stock after flash.
Next just copy superuser zip file to phone, go to download mode and adb flash cyanogen recovery img. Then reboot to recovery, choose to flash update, and find the superuser. zip and flash it, voila.
https://www.mediafire.com/?8o6qtn7hlsec0zj,yqbbzb7divlcvvc
Kitkat, anyone?
Does anybody have a stock KitKat ROM for this device? I'd like to try to bypass the FRP, but am stuck on what must be either a marshmallow or lollipop ROM.
What carrier do you have?
I can send you a backup of the FRP.img for Marshmallow or for lollipop.
You can dd if= flash it to your device and you should be all good.
I am looking for any older roms for these devices too.
Seems like not too many people save the RUU and then HTC only releases the newest.
I got lollipop and marshmallow that's it.
But like i said we can fix the frp partition.
Issue is fixed
BigCountry907 said:
What carrier do you have?
I can send you a backup of the FRP.img for Marshmallow or for lollipop.
You can dd if= flash it to your device and you should be all good.
I am looking for any older roms for these devices too.
Seems like not too many people save the RUU and then HTC only releases the newest.
I got lollipop and marshmallow that's it.
But like i said we can fix the frp partition.
Click to expand...
Click to collapse
I ended up fixing it using some ADB commands as noted in the "Well, I may have found..." thread. It'll be nice to have this phone out of my life. The day I had to spend with it was two days too many.
Related
Hi All -
New to this phone obviously (RAZR MAXX). Trying to get a grasp on it, as it's way more complicated than HTC and Samsung phones. I've rooted and installed 100s of custom ROMs with those brands before. This is my 1st Motorola since the Motorola V120c if anyone is old enough to remember that dinosaur. On nTelos' network nonetheless.
I have some questions that I would like answered and I hope someone will do me the honor as the content is really sporadic.
What is Fastboot for this device, what does it do?
Safestrap & Bootstrap? What's the difference? Which is better?
Can I flash ROMS through CWM like I have in the past?
What purpose does RSD Lite serve other than to flash Fasboot files?
Why would I want to flash fastboot? (Redundant question I think)
Thanks to anyone that takes the time to help me out.
I rooted and flash the crap out of my last phone which was Samsung. This phone seems really complex. I'm really on my toes, don't want to brick my phone. But I do want to root to get rid of the bloatware and test out some roms. The stock OS is laggy at times.
Honestly I really like the Stock OS as is. It does seem laggy at times, but nothing worse than I've run into on HTC or Samsung phones.
HTC Sense UI was/is terrible since it's so bloated and Samsung couldn't make a GPS radio capable of locating a mall let alone provide directions to anywhere. Terrible phones.
So far this phone is awesome, really bought it for the battery life honestly.
I too would like to DELETE the garbage that Verizon has installed on this thing. In terms of bloat, Verizon takes it to a whole new level. Just wow.
I'm in the same boat. Only had the phone for 2 days so far. I've already rooted it, but haven't gone any farther. But in some of my reading, I thought I saw that removing the bloatware can cause OTA updates to not happen. Hopefully someone can shed some more light on that issue.
midas69 said:
I'm in the same boat. Only had the phone for 2 days so far. I've already rooted it, but haven't gone any farther. But in some of my reading, I thought I saw that removing the bloatware can cause OTA updates to not happen. Hopefully someone can shed some more light on that issue.
Click to expand...
Click to collapse
I rooted mine 5 mins after activating it haha. As far a bloat, just use titanium pro and freeze it. Very simple. I froze around 35 apps and haven't had any issues associated w it. Should an ota come I should be prompted still. Just unfreeze all apps. Accept ota, reroot. If it breaks root completly then eventually it will get root again. I actually Ind, e system to run very well but honestly have no idea how just stock runs as I froze these apps instantly. I did not safe strap or bootstrap but I had previous knowledge of things I should be able to freeze and not and I figured it out myself
I find this phone so easy. There YouTube videos on everything.
To Get bootstrap, all you need to do is press one button, this phone has to be the easiest I've been on. The only people that struggle are the desperate ones that cba to search the forums And YouTube
Ask us any Android Related Question @FeraLabsDevs on Twitter
IdowhatIwant said:
Hi All -
What is Fastboot for this device, what does it do?
Safestrap & Bootstrap? What's the difference? Which is better?
Can I flash ROMS through CWM like I have in the past?
What purpose does RSD Lite serve other than to flash Fasboot files?
Why would I want to flash fastboot? (Redundant question I think)
Thanks to anyone that takes the time to help me out.
Click to expand...
Click to collapse
- Fastboot: its just the stock bootloader, can flash moto updates/factory reset/wipe cache. it also lets you into AP fastboot, which is where u recover stock with rsd.
- Safestrap/bootstrap: bootstrap is currently our only way of CWM on the gsm phones, i understand safestrap is pretty much like dualbooting except its not(only its not completely compatible with gsm)
- can you flash with cwm: YES!
- another purpose for rsd: i have only used it for recovering after ics, so idk.
- why flash a fastboot image?: if you mess up badly or get a bootloop you can recover back to stock
midas69 said:
I'm in the same boat. Only had the phone for 2 days so far. I've already rooted it, but haven't gone any farther. But in some of my reading, I thought I saw that removing the bloatware can cause OTA updates to not happen. Hopefully someone can shed some more light on that issue.
Click to expand...
Click to collapse
removing bloatware will cause you to be unable to get ota's (freezing and then unfreezing with TiB before ota update works fine, as long as you don't uninstall).
but i think its enough to just flash a fastboot with rsd (fully return to stock), then you can get the ota
Look here:
aashrey99razr.wordpress.com
Helped me out a lot!
Gesendet von meinem XT910 mit Tapatalk
Addictd said:
removing bloatware will cause you to be unable to get ota's (freezing and then unfreezing with TiB before ota update works fine, as long as you don't uninstall).
but i think its enough to just flash a fastboot with rsd (fully return to stock), then you can get the ota
Click to expand...
Click to collapse
I'm afraid I deleted one app before I was aware of this. TiB shows that I made a backup of it, but doesn't give me the option to restore it. Guess I'm screwed.
hehe, probably not
did you make a cwm backup prior to uninstalling the app(s)?
then you could just restore that
if not the titanium backup file should be on your internal sdcard in /mnt/sdcard/TitaniumBackup as a gzipped .apk with a kinda cryptic filename
you could try ungzipping it and installing with a file explorer.
or you could just backup with cwm and flash the correct fastbootimage for your phone from here: http://forum.xda-developers.com/showthread.php?t=1362956
usind rsd lite
and that should do it
but why not just flash a fastboot and isntall arctic 3.0.5?
Addictd said:
hehe, probably not
did you make a cwm backup prior to uninstalling the app(s)?
then you could just restore that
Click to expand...
Click to collapse
Of course not, that would be too easy
if not the titanium backup file should be on your internal sdcard in /mnt/sdcard/TitaniumBackup as a gzipped .apk with a kinda cryptic filename
you could try ungzipping it and installing with a file explorer.
Click to expand...
Click to collapse
There is a file there, but it doesn't have an .apk. There's a gzip file, inside that is a tar file. In there are imbedded data directories, but no actual files.
or you could just backup with cwm and flash the correct fastbootimage for your phone from here: http://forum.xda-developers.com/showthread.php?t=1362956
usind rsd lite
and that should do it
Click to expand...
Click to collapse
Might take that route when the next update is ready.
But why not just flash a fastboot and isntall arctic 3.0.5?
Click to expand...
Click to collapse
Well, as I said, I only got the phone Saturday, and I work weekends.
But I've got an issue hooking up to my work email account. I was unable to get it working on my Touchpad using CM7 or CM9. I originally bought a Galaxy Nexus and had no luck with that either, thus I bought the Razr. I still can't get the native apps to work, but at least Touchdown semi-works (no Activesync). So I'm actually a little gun shy about trying new things.
Addictd said:
- Safestrap/bootstrap: bootstrap is currently our only way of CWM on the gsm phones, i understand safestrap is pretty much like dualbooting except its not(only its not completely compatible with gsm)
Click to expand...
Click to collapse
Does that mean that we can't use ROM Manager or do we just need to use Bootstrap to install CWM and than use ROM Manager like we otherwise would? I got used to that app on my old phone.
I got a GSM RAZR and I have just rooted, the root script pushed in my phone some app called Bionic Bootstrapper, which gives me options Bootstrap Recovery and Reboot Recovery, what does each of them do? I don't plan on changing ROMs for now, but I definitely need to be able to recover the system.
It appears there isn't any real root on this device since the bootloader is locked. Samsung and HTC devices have their BLs unlocked so it's easier to make a permanent Recovery that will persist on reboot. I'm speculating of course, so someone correct me if I'm wrong.
Reboot recovery should reboot the phone to a ClockworkMod style "DOS" menu that allows you to preform functions like Back up, install zip files or even a new ROM.
When I did it, it rebooted a triangle and exclamation point, with an android guy on it. I was worried at that point. I hit the power button and the Recovery loaded instantly. Not sure if that's normal, but it's quite shakey compared to other devices out there.
I love this phone, so don't me wrong. It's just going to take some getting used to.
i dont think all of rom managers functions will work :/
bootstrap recovery: installs recovery (you only have to do this once)
reboot recovery: reboots your phone into cwm
the thing is the bootloader is locked, so we cant put cwm into the stock fastboot.
there is however a little workaround made by J.Y.Daddy that starts cwm everytime you boot, but this is installed in your rom, not in the stock fastboot, so you have to reinstall it when you flash a new rom :/
onboot cwm link: http://forum.xda-developers.com/showthread.php?t=1385283
Addictd said:
i dont think all of rom managers functions will work :/
bootstrap recovery: installs recovery (you only have to do this once)
reboot recovery: reboots your phone into cwm
the thing is the bootloader is locked, so we cant put cwm into the stock fastboot.
there is however a little workaround made by J.Y.Daddy that starts cwm everytime you boot, but this is installed in your rom, not in the stock fastboot, so you have to reinstall it when you flash a new rom :/
onboot cwm link: http://forum.xda-developers.com/showthread.php?t=1385283
Click to expand...
Click to collapse
Is there some way to otherwise boot into CWM enviroment, some combination of keys or something like on other phones? Not much use for CWM if you brick your phone and can't boot into it. Also, is installed CWM not going to cause a problem for regular OTA updates and do we need to reinstall it afterwards?
From what I understood, Motorola has put some sort of recovery environment on this phone already, but I don't know what it can be used for.
And I have GSM version, bootloader is not locked, so I don't have to worry about that.
laserburn said:
Is there some way to otherwise boot into CWM enviroment, some combination of keys or something like on other phones?
Click to expand...
Click to collapse
there's a workaround by J.Y.Darry that makes it boot into cwm on every boot.
there is no keycombo for cwm booting. but you can boot into fastboot with both volumekeys + power
where you can go into stock "recovery" and AP fastboot
you will use AP fastboot in combination with RSD lite to flash back to stock if u mess up, there are also more options in fastboot, but i have never used them.
laserburn said:
Not much use for CWM if you brick your phone and can't boot into it. Also, is installed CWM not going to cause a problem for regular OTA updates and do we need to reinstall it afterwards?
Click to expand...
Click to collapse
you will use cwm to flash custom roms and make backups
then if you mess up and want to recover a backup you have to
- set phone in ap fastboot mode
- connect razr to computer
- use rsd lite(or an alternative flashtool) to flash the fastbootfile for your phone
- root and install bootstrapper
- reboot into cwm and restore backup
i dont think cwm in itself will cause any problems for OTA's. but if you install a custom rom its a different story
as long as you have the bootstrapper app installed on your phone, you should be able to bootstrap recovery and boot into cwm
laserburn said:
From what I understood, Motorola has put some sort of recovery environment on this phone already, but I don't know what it can be used for.
Click to expand...
Click to collapse
yes they have put a rudimentary recovery in it. but you can only use it to apply updates from sdcard (to manually download ota and install), wipe and factory reset. (someone correct me if i'm wrong here)
laserburn said:
And I have GSM version, bootloader is not locked, so I don't have to worry about that.
Click to expand...
Click to collapse
sorry to be the bringer of bad news. but i have gsm too. mine is locked, so i'm pretty solid your bl is too
troollolotorola -.-
Damn, how I miss my old phone where rooting was 1 click on the app and you could swap ROMs as easy as swapping socks.
How could I check if the bootloader is locked and what consequences does it have?
laserburn said:
Damn, how I miss my old phone where rooting was 1 click on the app and you could swap ROMs as easy as swapping socks.
How could I check if the bootloader is locked and what consequences does it have?
Click to expand...
Click to collapse
Yeah I agree with you. Rooting, flashing, CWM all 100 times easier on HTC and Samsung phones.
Don't get wrong though, I Love my RAZR Maxx, and the default OS is actually OK. Which is good because it seems that there is little to zero developement for the CDMA version of the droid RAZR/MAXX at the moment, if at all.
they're all over on the HTC/Sammy forums =D
laserburn said:
Damn, how I miss my old phone where rooting was 1 click on the app and you could swap ROMs as easy as swapping socks.
How could I check if the bootloader is locked and what consequences does it have?
Click to expand...
Click to collapse
if/when we get the BL unlocked this phone will be a dream
there is this utility made by mattlgrof u can use to check bl lock
http://forum.xda-developers.com/showthread.php?t=1486718
IdowhatIwant said:
Yeah I agree with you. Rooting, flashing, CWM all 100 times easier on HTC and Samsung phones.
Don't get wrong though, I Love my RAZR Maxx, and the default OS is actually OK. Which is good because it seems that there is little to zero developement for the CDMA version of the droid RAZR/MAXX at the moment, if at all.
they're all over on the HTC/Sammy forums =D
Click to expand...
Click to collapse
Ain't no agruing with that, but they don't make as sweet looking and solid phones i hope motorola pull their head out of their ass soon...
Development for the cdma version is found mostly on droidrzr.com (plenty of beta/alpha ICS and some GB roms) but they are missing some parts, so we have to wait till motorola release ics be4 they will be complete.
http://www.droidrzr.com/index.php/index
for all you non-cdma users out there, u should check out the cdma to gsm patch
http://www.droidrzr.com/index.php/topic/1233-cdma-port-cm9aokp-givesomelovetogsm/
Hello, recently I have rooted my phone using the toolkit. The current recovery I have is TWRP. I wanted the root in the first place to be able to use xposed. However, it wont work, Whenever I try to install the update or new version it force reboots my phone. Also I found out I cannot update my software! I tried unrooting using the unroot option on SU but it was only temporarily. I want a permanent unroot and back to stock.
Android version : 4.4.2
Software number : 1.12.502.18
I downloaded my stock image from http://forum.xda-developers.com/showthread.php?t=2701376 and the toolkit from http://forum.xda-developers.com/showthread.php?t=2699065
I tried to flash it using the toolkit but it gave me an error when I tried to flash it. I don't recall correctly but it said something about a remote error right when it was sending the image over. Honestly I do not want to do it again to see what it said in fear of bricking my phone. So I will try to be as detailed as possible.
When I downloaded the image it said something about the name not being the original one. When I first tried flashing the stock ROM with the original name when I download it"stock recovery 1.12.502 recovery.img" it (the toolkit) gave me an immediate error of not being able to select it. So I renamed it to "recovery.img". I tried again and it actually was in the process of flashing. THen the error showed up as said above. Someone please help me. Thank you.
Update
So i just downloaded a different image. I flashed it successfully! I am currently rebooting from the original recovery! Currently I am on the htc one loading screen. It's been a couple minutes, hopefully I did not brick it...
NOPE! I successfully returned to stock! ANother issue...I still have root access! How can remove SU? I tried the unroot option in the app but I am still rooted after reboot...
UNROOTED. Sadly SU won't delete...but at least I'm unrooted and can update now.
Sent from my HTC One_M8 using XDA Free mobile app
helpmeunrootmyphone said:
UNROOTED. Sadly SU won't delete...but at least I'm unrooted and can update now.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I don't know if the app is that big of a deal to you, but if it is, your options are...
1. Try factory reset in settings (may or may not work)
2. Reflash TWRP and flash the SuperSU.zip again than do a full unroot in settings.
3. Reflash TWRP and flash stock Sense ROM
Also, I made a guide in general which will help you fully return to stock. To begin the guide, you will need to be unlocked, rooted, and S-Off. That guide will help you hide the tampered and relocked banner.
If you don't care about the banners and the SuperSU app, it's probably not worth the effort and time.
Good luck.
Sent from my HTC One_M8 using Tapatalk
So you had an issue with Xposed, and you solution was to unroot? Wouldn't it have made more sense to troubleshoot the xposed problem? If you bothered to unlock the bootloader and root in the first place, IMO unrooting is a step backwards.
I'm also not a big fan of applying OTAs to a modded device. Yes, you cannot install official OTA updates on a modded phone. In particular, if stock recovery is not present, as its required for the OTA to install. If you want the latest software, just wait until the rooted version is posted in the Development section. Custom ROMs based on the 1.58 update started to be posted one day after the OTA started rolling out; and the stock rooted version was posted only 2 days after OTA release. For some people, getting it from here may even be faster than waiting for the OTA! That's pretty much how it goes. As long as there is developer interest in the device, you can rely on the latest software being available very quickly in the Development section.
The stock AT&T software is garbage anyway. I can't stand the amount of bloat, gimped features (WiFi hotspot) and other AT&T meddling. I don't understand why anyone would prefer this over other options. Software updates are always going to go to the international version first, anyway (AT&T is notorious for delaying updates for "testing"). What are you really getting with the 1.58 update? Extreme Power Savings mode, and a few other fixes? International M8 has had EPS mode for some time now.
---------- Post added at 09:31 AM ---------- Previous post was at 09:17 AM ----------
helpmeunrootmyphone said:
I downloaded my stock image from http://forum.xda-developers.com/showthread.php?t=2701376 and the toolkit from http://forum.xda-developers.com/showthread.php?t=2699065
I tried to flash it using the toolkit but it gave me an error when I tried to flash it. I don't recall correctly but it said something about a remote error right when it was sending the image over. Honestly I do not want to do it again to see what it said in fear of bricking my phone. So I will try to be as detailed as possible.
When I downloaded the image it said something about the name not being the original one. When I first tried flashing the stock ROM with the original name when I download it"stock recovery 1.12.502 recovery.img" it (the toolkit) gave me an immediate error of not being able to select it. So I renamed it to "recovery.img". I tried again and it actually was in the process of flashing. THen the error showed up as said above. Someone please help me.
Click to expand...
Click to collapse
Why do you need to use the toolkit at all, to flash recovery? Flashing recovery is a single fastboot command. Easy.
The toolkit adds unnecessary complication; and I've seen them cause errors when doing it "manually" works just fine. The toolkit might not be the problem in your case, but we would never know unless you try to do it manually.
If you really want to flash stock recovery (not my personal recommendation), I would start by wiping cache and flashing recovery with fastboot. I've seen maybe dozens of cases where issues with flashing a recovery was solved simply by wiping cache:
fastboot erase cache
fastboot flash recovery "filename.img"
I am having the same issue as above using the same build file from the link given in the other thread. However, whenever I am in Bootloader, the computer or terminal does not recognize my device.
1.12.502.18
Anytime I try to use the toolkit or manually through the command line, it gives me "unc paths are not supported" or "device not found". It is the same for both Bootloader and Recovery. My original problem was the person I bought it from had root on it so I decided to wipe the OS without backing up and now cannot get the Stock Recovery ROM or any other Custom ROM to install on the phone. I have also tried the SD card method and that brought up an error as well resulting in "failed."
Any help would be appreciated as the phone as it sits right now does not have any OS on it so it is stuck on the HTC Boot up screen.
Thanks in advance for those that can help.
Hello everyone!
I've been very happy with my rooted M9 for the last few months but now a system update message on my screen and I'm trying to figure out what to do about. I seem to recall when I rooted my phone that there could be complications if I install a system update on a rooted phone (like making a Nandroid Backup) but I'm finding scarce information on the topic. Does anyone here have some advice about this?
Rom...
http://forum.xda-developers.com/showthread.php?t=3083799
Firmware...
http://forum.xda-developers.com/showthread.php?t=3073355
Follow the second link above.
You will need to restore the factory system.img using TWRP (exFAT or NTFS for external USB as file is > 4GB).
This puts the modified system (root) back to stock so the update will run successfully.
Flash the original recovery for you system version too.
Then you can accept the OTA and then root the phone again.
Thanks for the responses! I'm still uncertain about a few things so tell me if I have this right.
First I need to restore the factory image. Is that a guy named OJM is talking about on this thread? (http://forum.xda-developers.com/sprint-one-m9/general/rooting-guide-t3073004)
To restore your clean system backup to accept OTAs, you must use fastboot. If you are S-ON, you must be in download mode.
-copy your clean system.emmc.win to your adb/fastboot folder on your pc
-boot into download mode
-use cmd fastboot flash system system.emmc.win
Click to expand...
Click to collapse
In that case, what is a system.emmc.win?
Then I flash the original recovery...what are you refering to when you say "original recovery"?
After that my phone should be locked again and I can go to that second link, download the latest firmware and flash it. And then I can unlock and root my phone again.
Edit: So it looks like someone has made a guide on how to get the OTA updates (if you use the right words in your search). It looks no one done anything with it since May so maybe it still works? http://forum.xda-developers.com/one-m9/general/best-unlocking-bootloader-rooting-guide-t3087354
I would just run the official RUU, it's a one shot process will take care of everything including the radios. Much easier than messing around, just make sure you are S-OFF before you do it. When it's done just flash the latest TWRP and install your rom you will be done.
Sim-X said:
I would just run the official RUU, it's a one shot process will take care of everything including the radios. Much easier than messing around, just make sure you are S-OFF before you do it. When it's done just flash the latest TWRP and install your rom you will be done.
Click to expand...
Click to collapse
That was what I ended up doing. Had few bumps on the way but I managed to get everything working. Thanks for the help everyone!
RUU
Sim-X said:
I would just run the official RUU, it's a one shot process will take care of everything including the radios. Much easier than messing around, just make sure you are S-OFF before you do it. When it's done just flash the latest TWRP and install your rom you will be done.
Click to expand...
Click to collapse
hi sim I have a question the only thing I got to make sure is that the phone is S-OFF and nothing will happen because I read that also the bootlooder had to be lock again so I'm not sure
I know there has been many threads giving explicit instructions on how to unlock bootloader, gain s-off, and install TWRP recovery. But I am having problems/questions that no one (at least of what I've read) has encountered. I will try and make this clear for y'all but bear with me. Before I start just let it be known that I DO HAVE my bootloader unlocked. I ended up going to a cell phone repair place and paying a small fee to get my bootloader unlocked.
1. Do I need to gain s-off to be able to root and install TWRP recovery?
I say this because the I have tried the has00n application to unlock bootloader, gain s-off, root, and install TWRP recovery, but I ran into problems with my computer recognizing my device. I had all the necessary files downloaded (at least to my knowledge) but it honestly just wouldn't recognize my device.
2. If I do not need to gain s-off to install TWRP recovery and install a custom ROM (I'm going to be installing Cyanogenmod), how do I go about doing that?
Honestly I'm so fed up with this that I just want to sell this phone and get another one, all I want to do is get Cyanogenmod on this phone but it's so immensely difficult.
Please help me! I have been trying to get this accomplished for so long but I feel like because this phone is older all the info about how to root and gain s-off is outdated.....
All of your help is greatly appreciated!!
You shouldn't need s-off for installing a custom rom. That's for tinkering with model id and scary stuff like that. I'm not sure what that tool is but I only know of one way to get s-off, and that's sunshine s-off.
As for rooting, when you install a custom rom via twrp or cwm, it will typically ask you if you'd like to root your phone AFTER installing the rom, but BEFORE you restart the first time. So the process should be:
Unlock
Install twrp or cwm
Wipe and factory reset
Install rom
Once completed, phone will prompt if you want to restart
Select YES to root on restart
And then wait for the phone to reboot! (it'll take a little while first time)
After the boot, it'll probably ask you to install superSU, which is the root manager app. If it doesn't, find it in the play store and you're set.
Sent from my HTC One_M8 using Tapatalk
shoe-jitsu said:
You shouldn't need s-off for installing a custom rom. That's for tinkering with model id and scary stuff like that. I'm not sure what that tool is but I only know of one way to get s-off, and that's sunshine s-off.
As for rooting, when you install a custom rom via twrp or cwm, it will typically ask you if you'd like to root your phone AFTER installing the rom, but BEFORE you restart the first time. So the process should be:
Unlock
Install twrp or cwm
Wipe and factory reset
Install rom
Once completed, phone will prompt if you want to restart
Select YES to root on restart
And then wait for the phone to reboot! (it'll take a little while first time)
After the boot, it'll probably ask you to install superSU, which is the root manager app. If it doesn't, find it in the play store and you're set.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply. So as of right now I am using the fastboot adb to control my phone from the command prompt on the computer, but there is a problem. When I try and flash the custom recovery (either TWRP or CWM) it says that the files are unrecognizable, so they're pretty much corrupted. I honestly don't know that to do. I know I can achieve root if I just get either one of these recoveries to flash but it seems that all the files for the htc one m8 TWRP and CWM are corrupted. What are you suggestions at this point? The fastboot iadb is working perfect I just need a non-corrupted recovery file and I'm searching around the internet withno luck of finding one. Is there one that you can attest to working? If so that would be amazing. Again, thanks for your help, hopefully we can get this sorted out!
Hmm, do you have the latest version of twrp? Sometimes older versions don't install, I would try to see what version of twrp htc one m8 users are using, I'm not by my computer right now so I'm not sure. I also know that twrp works better on htc one for some reason, I've never found a version of cwm that works on my htc one. Make sure you are using the proper install command to install it too, I think it's fastboot flash recovery FILENAME.IMG
If all else fails, all I can think of at this point is that you got a bad download or something ?
Sent from my HTC One_M8 using Tapatalk
shoe-jitsu said:
Hmm, do you have the latest version of twrp? Sometimes older versions don't install, I would try to see what version of twrp htc one m8 users are using, I'm not by my computer right now so I'm not sure. I also know that twrp works better on htc one for some reason, I've never found a version of cwm that works on my htc one. Make sure you are using the proper install command to install it too, I think it's fastboot flash recovery FILENAME.IMG
If all else fails, all I can think of at this point is that you got a bad download or something
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Yeah I've been trying to use the most current version of twrp and it didn't work. I ended up trying past versions and those didn't work either. The fastboot command i am using is the same as the one you stated. There's just a problem with the files. I'm beyond frustrated but really thank you for your help. When you're by your computer can you please send me the twrp version you have, it would be much appreciated.
flapjackSam said:
Yeah I've been trying to use the most current version of twrp and it didn't work. I ended up trying past versions and those didn't work either. The fastboot command i am using is the same as the one you stated. There's just a problem with the files. I'm beyond frustrated but really thank you for your help. When you're by your computer can you please send me the twrp version you have, it would be much appreciated.
Click to expand...
Click to collapse
Can you copy and paste your command window to this thread? It would help to see the exact error outputting. You can highlight and right click to copy anything from command window.
flapjackSam said:
Yeah I've been trying to use the most current version of twrp and it didn't work. I ended up trying past versions and those didn't work either.
Click to expand...
Click to collapse
Is the phone currently on Lollipop, or otherwise? You can't know what version TWRP is correct, without this info. Current TWRP (2.8.7.0) won't work if the phone is on older OS version. Vice versa, if the phone is currently on Lollipop, older versions of TWRP (I believe older than 2.8) won't work. You have to flash the specific TWRP version that matches your OS version. Guessing which TWRP version to flash is not the right way to go about this.
Also, you need to tell us the actual TWRP version number you got, and where you downloaded it from. I've seen quite a few instances where folks thought they had the "most recent" version, but in fact they weren't even close. Its always best to be specific as possible, and provide all the details when getting help here.
Additionally, go into Settings (or do getvar all), and tell us the software number. If you got the Stagefright patch, it might be screwing up install of TWRP as well.
flapjackSam said:
The fastboot command i am using is the same as the one you stated. There's just a problem with the files..
Click to expand...
Click to collapse
Again, just saying you used the "same" command isn't enough. A single wrong character, wrong file name, wrong path will cause the command to fail. As the previous response requested, please cut/paste, or better yet post a screenshot of your command prompt window, so we can see the exact command syntax, and the specific error message.
I can virtually guarantee that as long as you downloaded the file direct from the TWRP website, and tried downloading (and flashing) it more than once (to eliminate the possibility of corruption during file transfer); that the issue is almost certainly pilot error.
Somehow I'm a little frusrated. I've brought my phone since today. So it is currently on Lollipop. There is no Power in setting to uncheck Fastboot. Is there any way I can root my phone?
MistakenUtopia said:
Somehow I'm a little frusrated. I've brought my phone since today. So it is currently on Lollipop. There is no Power in setting to uncheck Fastboot. Is there any way I can root my phone?
Click to expand...
Click to collapse
Press and hold the power button until is hard reboots, then hold vol down as well. You should go to boot loader before the HTC screen pops up.
Back Up!
Just a reminder, after you install TWRP, boot into recovery (TWRP) and create a backup file saved to your SD card first before trying to install a new ROM!
Always can restore if things go wrong or you don't like it.
:fingers-crossed:
I'd like to keep this simple. I tried rooting and not a single tutorial on here has ended with root privileges for various reasons. I'm done with it. I flashed stock firmware in hopes of removing any trace of files that may have been altered during the various root tutorials I followed, but Samsung Pass says the device is still rooted.
What do I need to do to return to 100% stock?
noxarcana said:
I'd like to keep this simple. I tried rooting and not a single tutorial on here has ended with root privileges for various reasons. I'm done with it. I flashed stock firmware in hopes of removing any trace of files that may have been altered during the various root tutorials I followed, but Samsung Pass says the device is still rooted.
What do I need to do to return to 100% stock?
Click to expand...
Click to collapse
I assume you unlocked the bootloader. Try Relocking and flash the firmware again.
Weather that will work is anybodys guess.
Rooting is a pretty simple procedure I can't think of any reason it didn't work except user error.
This method works perfectly on T860.
***********************
https://forum-xda--developers-com.c...-to/root-guide-t860-root-twrp-method-t4095677
jhill110 said:
I assume you unlocked the bootloader. Try Relocking and flash the firmware again.
Weather that will work is anybodys guess.
Rooting is a pretty simple procedure I can't think of any reason it didn't work except user error.
Click to expand...
Click to collapse
Well, this isn't the first time I've rooted a device and I followed every step of every tutorial I found on here and, for some reason, it would not root. This is the first, and only, device I've had this much trouble with.
The tutorial for rooting without TWRP: I made the patched AP file and flashed it; however, I could not boot into recovery or download mode and it always stuck on the boot logo.
The tutorial for installing TWRP didn't have a link for the encryption disabler and the one I found did absolutely nothing and the folders in storage just showed as a string of numbers and letters.
Maybe, if someone could put together a full tutorial with the files being used within the tutorial, it would have worked.
noxarcana said:
Well, this isn't the first time I've rooted a device and I followed every step of every tutorial I found on here and, for some reason, it would not root. This is the first, and only, device I've had this much trouble with.
The tutorial for rooting without TWRP: I made the patched AP file and flashed it; however, I could not boot into recovery or download mode and it always stuck on the boot logo.
The tutorial for installing TWRP didn't have a link for the encryption disabler and the one I found did absolutely nothing and the folders in storage just showed as a string of numbers and letters.
Maybe, if someone could put together a full tutorial with the files being used within the tutorial, it would have worked.
Click to expand...
Click to collapse
Did you get the bootloader unlocked?
Unlocking the bootloader:
https://www.getdroidtips.com/how-to...to_Unlock_Bootloader_on_Samsung_Galaxy_Tab_S6
To get to download mode it's volume up and volume down then plug your pc into device. NOT POWER AND VOLUME DOWN. This can be a pain in the back side.
If you do it this way you'll get the option unlock / lock bootloader or go to bootloader mode.
If you follow the instructions perfectly and then follow the instructions for rooting it will work.
Move on to root.
ROOTING :
https://forum-xda--developers-com.c...-to/root-guide-t860-root-twrp-method-t4095677
AP SLOT = PATCHED FILE
BL SLOT = BL FILE
CP SLOT = CP FILE (T865) NOT T860... T860 HAS NO CP FILE
CSC SLOT =HOME CSC FILE
DON'T forget to setup WiFi before installing magisk manager. ^^^^^^^^^
Install TWRP.
TWRP :
https://forum-xda--developers-com.c...b-s6/development/recovery-twrp-3-3-1-t3975587
I hope this helps you out.
If you have anymore questions just ask.
Disable DM VERITY ENCRIPTION DISABLER
PATCHED ODIN
jhill110 said:
Did you get the bootloader unlocked?
Click to expand...
Click to collapse
Yep, bootloader unlock was easy. I'll give root another try with your steps in a couple of days when I'm off work. Sorry if I came across a bit aggressive in my previous posts; I have a tendency to do so even when I'm not frustrated.
This has been so frustrating to me because I know rooting is usually a simple process; as you said previously.
jhill110 said:
ROOTING :
https://forum-xda--developers-com.c...-to/root-guide-t860-root-twrp-method-t4095677
AP SLOT = PATCHED FILE
BL SLOT = BL FILE
CP SLOT = CP FILE (T865) NOT T860... T860 HAS NO CP FILE
CSC SLOT =HOME CSC FILE
DON'T forget to setup WiFi before installing magisk manager. ^^^^^^^^^
Click to expand...
Click to collapse
So, yea, I'm a bit late getting around to this. Sorry.
This is where things get hung up. Everything flashes just fine and I can even get into TWRP; however, when I try to boot the tablet i get the Galaxy Tab S6 screen, then the warning about the bootloader being unlocked, and back to the Galaxy Tab S6 screen but with a "unofficial software" warning....and repeat. It just boot loops and this is where I've since I started this thread.
Also, returning to stock doesn't completely remove root traces as I can't use Samsung Pass and I simply get a warning about the device seemingly being rooted even though it isn't.
If you installed TWRP, then you tripped Knox tripping Knox will permentally disable Samsung Pay as far as I'm aware. You'll never get it back, regardless of root or no root access.
Also, I'm not sure why you're installing TWRP AND trying to flash a Magisk patched OS. It's one or the other, you don't need to do both. Unless something has changed in Android 10?
If you're flashing TWRP, you just need to flash Magisk in TWRP(along with the other files!), no need to patch AP.
bartleby999 said:
If you installed TWRP, then you tripped Knox tripping Knox will permentally disable Samsung Pay as far as I'm aware. You'll never get it back, regardless of root or no root access.
Also, I'm not sure why you're installing TWRP AND trying to flash a Magisk patched OS. It's one or the other, you don't need to do both. Unless something has changed in Android 10?
If you're flashing TWRP, you just need to flash Magisk in TWRP(along with the other files!), no need to patch AP.
Click to expand...
Click to collapse
Not Samsung Pay, I couldn't care less about that, but Samsung Pass; I guess it looks for knox being tripped now too. That sucks, but I'll make do without it.
I was following the guides posted above. The root guide said to flash a Magisk patched OS and then there was a guide for installing TWRP. I never had this many issues or this much confusion with my 1st gen Tab S; maybe I just haven't kept as close of an eye on these things since I've been without a tablet for awhile before getting the Tab S6.
Anyway, for clarification, all I need to do is flash TWRP and then flash magisk from within TWRP? Or, just install the magisk apk after booting into Android?
noxarcana said:
Not Samsung Pay, I couldn't care less about that, but Samsung Pass; I guess it looks for knox being tripped now too. That sucks, but I'll make do without it.
I was following the guides posted above. The root guide said to flash a Magisk patched OS and then there was a guide for installing TWRP. I never had this many issues or this much confusion with my 1st gen Tab S; maybe I just haven't kept as close of an eye on these things since I've been without a tablet for awhile before getting the Tab S6.
Anyway, for clarification, all I need to do is flash TWRP and then flash magisk from within TWRP? Or, just install the magisk apk after booting into Android?
Click to expand...
Click to collapse
My bad for some reason I just read that as Samsung Pay. But yeah Samsung Pass also doesn't work with root, I'm not sure if that is permanent though as I've never used Samsung Pass, but did come across this thread https://forum.xda-developers.com/general/rooting-roms/samsung-pass-knox-tripped-devices-t3687977 it is possible to get some components of Knox to function again, (I have a working Secure Folder) so might be worth taking a look.
As for you question...
You should give this thread a good read... https://forum.xda-developers.com/galaxy-tab-s6/development/recovery-twrp-3-3-1-t3975587
Basic steps are... Unlock the bootloader and then boot into system and ensure it's unlocked in settings. You may need to connect to the web, I can't remember tbh
First you need to install TWRP, once that is done you need to reboot but YOU HAVE TO boot directly back into TWRP. You cannot boot into system, or TWRP will be overwritten by stock recovery and you'll need to start over again. Once TWRP is installed, boot into TWRP and format data then reboot recovery, flash Kernel then flash encryption disabler then unmount the system and flash Magisk 20.4 - Finally reboot to system.
I'd seriously and strongly suggest reading that TWRP thread to ensure things go smoothly.
bartleby999 said:
First you need to install TWRP, once that is done you need to reboot but YOU HAVE TO boot directly back into TWRP. You cannot boot into system, or TWRP will be overwritten by stock recovery and you'll need to start over again. Once TWRP is installed, boot into TWRP and format data then reboot recovery, flash Kernel then flash encryption disabler then unmount the system and flash Magisk 20.4 - Finally reboot to system.
I'd seriously and strongly suggest reading that TWRP thread to ensure things go smoothly.
Click to expand...
Click to collapse
I'll give those threads a thorough reading over tonight and tomorrow night while at work and then see if I can get this all sorted out Monday when I'm off. I remember Pass still working with root on the original Tab S so I'm hoping it hasn't changed.
Thanks for jumping in to try and help me with this. I'll update within a few days instead of months like my last update. ?
noxarcana said:
I'll give those threads a thorough reading over tonight and tomorrow night while at work and then see if I can get this all sorted out Monday when I'm off. I remember Pass still working with root on the original Tab S so I'm hoping it hasn't changed.
Thanks for jumping in to try and help me with this. I'll update within a few days instead of months like my last update. ?
Click to expand...
Click to collapse
It has definitely changed. Pass doesn't work on my Tab S6 and I'm rooted, I guess Knox is now integrated with alot of Samsung apps now. Not sure if it's possible or not to get it working again though, I've never bothered to research it as I don't need it for anything - But as I said, I got Secure Folder working again, so there's some hope for Pass I guess - That first thread I linked looked promising, but I only skimmed it, because frankly I'm not interested.
If you need anymore help, report back -I'll try my best. Also, the TWRP thread I linked is full of helpful people. :good:
bartleby999 said:
It has definitely changed. Pass doesn't work on my Tab S6 and I'm rooted, I guess Knox is now integrated with alot of Samsung apps now. Not sure if it's possible or not to get it working again though, I've never bothered to research it as I don't need it for anything - But as I said, I got Secure Folder working again, so there's some hope for Pass I guess - That first thread I linked looked promising, but I only skimmed it, because frankly I'm not interested.
If you need anymore help, report back -I'll try my best. Also, the TWRP thread I linked is full of helpful people. :good:
Click to expand...
Click to collapse
Perhaps I'm just not meant to have root with this device. Flashing that kernel causes Wifi not to work, but it does boot. Not flashing the kernel also booted, but I couldn't install Magisk Manager. Other than the bootloader still being unlocked, I'm back on stock firmware.
noxarcana said:
Perhaps I'm just not meant to have root with this device. Flashing that kernel causes Wifi not to work, but it does boot. Not flashing the kernel also booted, but I couldn't install Magisk Manager. Other than the bootloader still being unlocked, I'm back on stock firmware.
Click to expand...
Click to collapse
What firmware are you running?
I remember seeing something about one of the newer Kernels effecting WIFI on Android 10. Assume you're running that?
If that's the case, give the TWRP thread a browse - You maybe able to find an older version of the Kernel that'll work - As far as I'm aware, an older Kernel than what you currently installed will work, but a newer version than currently installed will possibly cause bootloop.
I can't help much with Android 10 specific stuff as I'm still running Android 9 because it's stable.
bartleby999 said:
What firmware are you running?
I remember seeing something about one of the newer Kernels effecting WIFI on Android 10. Assume you're running that?
If that's the case, give the TWRP thread a browse - You maybe able to find an older version of the Kernel that'll work - As far as I'm aware, an older Kernel than what you currently installed will work, but a newer version than currently installed will possibly cause bootloop.
I can't help much with Android 10 specific stuff as I'm still running Android 9 because it's stable.
Click to expand...
Click to collapse
I am definitely on the latest Android 10 update so I'll see if I can find an earlier version that will work. I'll see what I can find out on the TWRP thread.
noxarcana said:
I am definitely on the latest Android 10 update so I'll see if I can find an earlier version that will work. I'll see what I can find out on the TWRP thread.
Click to expand...
Click to collapse
If you can't find an older Kernel (I'm not sure there is one for Android 10), it may be the case that you'll need to wait for the Kernel to be updated.
bartleby999 said:
If you can't find an older Kernel (I'm not sure there is one for Android 10), it may be the case that you'll need to wait for the Kernel to be updated.
Click to expand...
Click to collapse
Yea, it looks like Samsung made some "wifi improvements" in OneUI 2.5 and that's causing some kernel issues preventing wifi from working. I think I could find a kernel fairly easily, but I think I'm just going to wait for a kernel update. If it never comes, I'll find an older kernel. Thanks for the help!