{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
***disclaimer***
While I make every effort to test these builds as much as possible, I am not responsible for anything that may happen to your device.
I ask that you do your part to know your device and know how to recover from problems before you flash!
If you are smart enough to download and flash software then you should be smart enough to assume all responsibility for modifying your device and take steps to ensure you have backups and a recovery plan in place.
I am not responsible for thermonuclear war or you bricking your device and smashing it against a wall after you made a hockey puck out of it.
ROM is built from current LS source and uses the CM Themes engine. I have another build using RRO Layers but frankly speaking RRO layers is sketchy at best IMHO and not yet ready for prime time without serious refinement. I built this as a hobby project because the SMT-900 has been sadly neglected by devs and because I'm a diehard LiquidSmooth fan. I hope you like it as much as I do. None of this would be possible without the time spent, hard work and dedication of the following devs:
chhaggerty for his device and vendor repos
crpalmer for the initial bring up work on all the tab family
The LiquidSmooth team
Cyanogenmod
SlimRoms
THANKS!
KNOWN ISSUES/BUGS
Let me know nothings perfect!
DOWNLOAD
link to download site:
LiquidSmooth v4.1 Tab Pro 12.2
INSTALLATION:
I recommend a full wipe AFTER YOU MAKE A NANDROID BACKUP OF YOUR CURRENT SETUP!! This ensures no leftovers get in the way and we all know where you started from! Updates can be done via standard reset wipe.
RECOVERY AND GAPPS:
I use and recommend TWRP RECOVERY and FLASHIFY [ROOT] from play store to update TWRP via .img files.
I like SLIMS GAPPS myself PA work well too..
SOURCE CODE:
Liquidsmooth-Github
Device Source
Vendor Source
Kernel Source
XDA:DevDB Information
Liquidsmooth v4.1 for Tab Pro 12.2 , ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
wargear
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Beta
Current Beta Version: ver-2
Beta Release Date: 2015-10-12
Created 2015-10-12
Last Updated 2015-10-12
Reserved
Reserved
I tried an alpha build of this about 6 months ago and I found it very impressive, notably with the built in Adiutor, with a 10% less footprint than CM. However, at the time I couldn't get my SD card to work, why I had to abandon. But, I will definitely try it now when it's up as a beta. I have really high hopes for the potential of this ROM./arc
It booted up smoothly, supersu and adiutor are pre-installed as system apps, proceeding installing Xposed and all my software (+4GB)...
Everything seems to run very smooth and the unit is very responsive. I will play around with adiutor a little, trying to find some optimal settings.
Thank you very much for bringing this up.
arcadia2uk said:
I tried an alpha build of this about 6 months ago and I found it very impressive, notably with the built in Adiutor, with a 10% less footprint than CM. However, at the time I couldn't get my SD card to work, why I had to abandon. But, I will definitely try it now when it's up as a beta. I have really high hopes for the potential of this ROM./arc
It booted up smoothly, supersu is included, but unfortunately Adiutor is gone, but proceeding in installing Xposed and all my software (+4GB).
Click to expand...
Click to collapse
So good to hear from you! I'll look forward to your comments and hope your installs proceed smoothly! Thanks! Hmm.. never occured to me about kernel auditor but it is there under settings/performance and seems ok... check and advise plz!
wargear said:
So good to hear from you! I'll look forward to your comments and hope your installs proceed smoothly! Thanks! Hmm.. never occured to me about kernel auditor but it is there under settings/performance and seems ok... check and advise plz!
Click to expand...
Click to collapse
My fault,I had forgotten it was a system app.
Rom is working great & it's flying! So far, everything I've tried works well.
Is there a way to fix the 3 second delay when waking the device?
nickster1 said:
Rom is working great & it's flying! So far, everything I've tried works well.
Is there a way to fix the 3 second delay when waking the device?
Click to expand...
Click to collapse
I was just wondering the same thing about the wake-up delay.
Also, the Kernel Adiutor seems limited to view settings, am I doing something wrong?
arcadia2uk said:
I was just wondering the same thing about the wake-up delay.
Also, the Kernel Adiutor seems limited to view settings, am I doing something wrong?
Click to expand...
Click to collapse
Kernel auditor seems to be working fine for me.
Update : I raised the minimum frequency to 300MHz & that helped the delay with waking the device.
nickster1 said:
Kernel auditor seems to be working fine for me.
Update : I raised the minimum frequency to 300MHz & that helped the delay with waking the device.
Click to expand...
Click to collapse
Maybe it's just a question that I don't know how to use it. Could you supply some detailed info of how to arrive to the settings? Thanks in advance/arc
arcadia2uk said:
Maybe it's just a question that I don't know how to use it. Could you supply some detailed info of how to arrive to the settings? Thanks in advance/arc
Click to expand...
Click to collapse
Sure, you just click the 3 line menu in the upper left, click on CPU, & three columns will appear. Touch where it says cpu minimum frequency in the left column & all frequencies will appear. Than you click the one you want to use. I hope this is what you're looking for. If not, let me know.
Great nickster, many thanks, I will try it once I'm back on the ROM, currently I'm trying out the SlimLP. What app are you using to tweak the CPU is that one?
arcadia2uk said:
Great nickster, many thanks, I will try it once I'm back on the ROM, currently I'm trying out the SlimLP. What app are you using to tweak the CPU is that one?
Click to expand...
Click to collapse
I saw you ask in the slim thread, so I let you know there.
nickster1 said:
Kernel auditor seems to be working fine for me.
Update : I raised the minimum frequency to 300MHz & that helped the delay with waking the device.
Click to expand...
Click to collapse
Great, I thought I tried that, but I might have messed something up. I really appreciate your input./arc
---------- Post added at 11:43 PM ---------- Previous post was at 11:41 PM ----------
nickster1 said:
Sure, you just click the 3 line menu in the upper left, click on CPU, & three columns will appear. Touch where it says cpu minimum frequency in the left column & all frequencies will appear. Than you click the one you want to use. I hope this is what you're looking for. If not, let me know.
Click to expand...
Click to collapse
I truly appreciate the info, the menu was hidden behind my floatification button./arc
@wargear
bug... advanced reboot does not work in developer options when selected
thanks for your work
toolhas4degrees said:
@wargear
bug... advanced reboot does not work in developer options when selected
thanks for your work
Click to expand...
Click to collapse
It works. You have to go to settings/LiquidSmooth/Interface/power menu & select the reboot menu in there.
Hows the battery life on this? I am currently on the CM 5.1.1 and it isn't so great (since 5.1).
Also, does one need to update the firmware before proceeding? I would assume so.
RedBullet said:
Hows the battery life on this? I am currently on the CM 5.1.1 and it isn't so great (since 5.1).
Also, does one need to update the firmware before proceeding? I would assume so.
Click to expand...
Click to collapse
I don't think it matters what firmware you're on actually. Battery life is the same as it is on cm which for me has been pretty good.
Can anyone confirm if Citrix Receiver works on this ROM?
Thanks
Sent from my SM-T900 using XDA Free mobile app
Tablet freezing
I have an app that is causing this ROM to freeze. It is Nascar's mobile Raceview app. The app is VERY graphic intensive in that it use GPS to track the position of 43 race cars on the track and display full color animation of the cars during a race. You can choose any one of the 43 cars and zoom in on its image and follow it and the cars close to it around the track. And you can also change to pont from which you are viewing the cars. Almost as if you had a drone with a tilt and zoom camera.
My question is, is there anything I can do in the settings to keep it from freezing? I've used the app on tablets with far less capacity than the Tab Pro without any problems. And i've used it with other ROMs on this tablet without problems.
Related
Team Horizon presents
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XenonHD is a custom firmware aka ROM for various Android devices. It is built from Android Open Source Project (AOSP) with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Base : Jelly Bean 4.3 JLS361 : FULL AOSP BASE FROM SOURCE.
It's Rockstable,Blazing fast.
and now Buttery Smooth too!
New XenonHD V10
Now with HALO
And Advanced settings
Download in post #2
Changelog in post #3
Team Horizon:
Adam80460
iceandfire
TheBr0ken
pr0xy man1Ac
pcarenza
T-Macgnolia
BULLDOZE
Black_Prince
Thanks to:
AOSP
Cyanogenmod
AOKP
Peter Alfonso
Daxxmax
CarbonDev
ParanoidAndroid
Source:
Github
Download:
XenonHD
http://www.xenonhd.com/downloads/roms/t0ltevzw/update-XenonHD-10-16-13-signed-t0ltevzw.zip
http://www.xenonhd.com/downloads/roms/t0ltevzw/update-XenonHD-10-16-13-signed-t0ltevzw.zip.md5sum
Gapps
http://goo.im/gapps/gapps-jb-20130813-signed.zip
Or
http://forum.xda-developers.com/showthread.php?t=2397942
Clean wipe is recommended!!!!!
Kernel source
Bugs
APN's must be wrong in the apn-config.xml. To get mobile data working read this post, thanks to kraziekc for posting the fix.
You have to go to Settings/Developer options/Root access and place a check mark beside apps and adb. This will be fixed in next version.
Bluetooth will not turn on but the fix is already in TeamHorizon github, I just need to sync and build when I get time.
If you go to Settings/Display/Brightness and select the settings icon on the slider it will FC. Again fix is already in TeamHorizon github.
Read Very Important
OTA
If you want to use the OTA function of this ROM you need to download the gapps-jb-20130301-signed.zip package and place it in the root of your internal sdcard. If you wish to use the 4.2.2_Gapps_No_PhotoSphere.zip or any other gapps package you must go to Settings/XenonHD updates. Then press the menu soft key and select Settings/Set GApps Package name and enter 4.2.2_Gapps_No_PhotoSphere.zip or what ever the name of the package you want to use is.
If you want to receive OTA notifications and have the OTA app auto flash the update you need to go to Settings/XenonHD updates. Then press the menu soft key and select Settings and place a check beside "Show Notifications" and Automatically Flash, see attached acreen shot.
Official XenonHD site:
http://www.xenonhd.com/
XenonHD Settings backup tool:
https://play.google.com/store/apps/d...om.xehd.backup
Please read this before asking dumb questions again and again:
http://forum.xda-developers.com/show....php?t=2075368
Join our community on Google+:
https://plus.google.com/communities/...22179967248992
==================================================
Important please read
I. Appreciation
There are many ways to show your support to us. You can:
Press the "Thanks" button.
Hit the donation button and help support the team
Wear our specially prepared banner
Share your opinion about my work and write some feedback in our threads.
Advertise our work to your friends, family, anyone who owns this device.
Rate our threads with 5 stars.
We appreciate all the support you give us, but we don't expect anything
Click to expand...
Click to collapse
II. Sharing
XDA-Developers.com is all about sharing. If you would like to use any part of our work, please feel free to do so but remember to do the following beforehand:
Inform - Please send us a PM or email telling us
Permission - Please, if you do not have permission from us, don't use it. Most of the time, we will allow you to, but if you don't get our permission first, we will report.
Credits - No one wants their work stolen. Please remember to give proper credits when using our work.
Click to expand...
Click to collapse
:
III. Support
If you have any issues or questions, please feel free to post them in the our threads. However, because all of us have social lives outside of XDA, your questions may not always be answered right away. Members who are more experienced in our work, please help out the ones who don't.
If you want to get the fastest and the best answer - ask the question in our threads instead of PM'ing us. Chances are, other users will be able to help you when Team Members don't have the time to.
Click to expand...
Click to collapse
IV. Updates
We are a busy team! Every Team Member has lives outside of XDA. You cannot expect us to sit in front of the computer all day and develop Android. Please do not ask for ETA's. The update will come when we release it. Sometimes, there is a good reason for why we have not released an update in a while. Please be patient with us, we will do as we promise. Updates will come.
Click to expand...
Click to collapse
V. Responsibilities
We are not responsible for your device! We do not guarantee that everything will work the way it's supposed to. Not every device is created equal, what might work on our devices may not work on yours or vice versa. Please be a responsible person when it comes to flashing. This is a mature site, don't act immaturely when your device becomes problematic. If you cry and blame us for "destroying" your device, we will laugh at you. Your device is your responsibility, act like it.
Thanks for choosing Team Horizon, we hope you enjoy our works as much as we enjoy working with them.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
http://www.xenonhd.com/blog.html
sweet rom,i run this on my wifes HTC rezound. she loves it.
just might have to give this a go on my note 2
ROM file name has t0lte in it instead of i605. Perhaps wrong file is linked?
NO F'N WAYYYYYY!
Xenon was my DD on my Gnex for majority of my time owning the device.
This oughta be a great rom...Downloading and flashing ASSSAP
Good to see the team here for the Note 2.
Thanks in advance for the great work.
Just when I thought I was set on a rom...
Been running since it was posted... And this ROM is f'n smooth and sips battery... downloaded all apps through play store and set up the ROM... One hour of 4g downloading and screen time and only lost 2% battery... If this is what I have to look forward to I have found my new DD
Sent from my SCH-I605 using Tapatalk 4 Beta
Nice to see ya got the thread up now t
Sent from my SCH-I605 using Tapatalk 4 Beta
I love that I can dual boot TW and Aosp. I can run whatever I want for aosp for fun on my secondary and my AllianceROM for the primary. Freakin awesome.
Keep the lookout for AllianceRom for Aosp (4.2.2). I will be building those for the Note 2 soon.
AngryManMLS said:
ROM file name has t0lte in it instead of i605. Perhaps wrong file is linked?
Click to expand...
Click to collapse
Sorry but when i first opened the thread i did put the wrong download link up but I fixed it not long after that. If you look it has t0ltevzw in the name wich is what the Verizon device is named. I promise this build was made strictly for the i605.
Ohh_Trenton said:
I love that I can dual boot TW and Aosp. I can run whatever I want for aosp for fun on my secondary and my AllianceROM for the primary. Freakin awesome.
Keep the lookout for AllianceRom for Aosp (4.2.2). I will be building those for the Note 2 soon.
Click to expand...
Click to collapse
You will find that when you build for the t0lte devices your bigest issue will be overlay errors in your device tree folders. Most spacificly the device/samsung/smdk4412-common and device/samsung/tolte folder. What overlay errors you get will depend on where you pill work tree you use and what source you are using to build with. But once you get those two folders sorted out you should be good. Make sure you have your init.local.rc setup correct our your camera will not work.. Last stay on top of the vendor/samsung proprietary files configuration. If it is not right GPS and other services will not work. Just trying to give you a heads up.
T-Macgnolia said:
Sorry but when i first opened the thread i did put the wrong download link up but I fixed it not long after that. If you look it has t0ltevzw in the name wich is what the Verizon device is named. I promise this build was made strictly for the i605.
You will find that when you build for the t0lte devices your bigest issue will be overlay errors in your device tree folders. Most spacificly the device/samsung/smdk4412-common and device/samsung/tolte folder. What overlay errors you get will depend on where you pill work tree you use and what source you are using to build with. But once you get those two folders sorted out you should be good. Make sure you have your init.local.rc setup correct our your camera will not work.. Last stay on top of the vendor/samsung proprietary files configuration. If it is not right GPS and other services will not work. Just trying to give you a heads up.
Click to expand...
Click to collapse
And that's why you're awesome! Don't know many devs who come right out and say that. By the way nice work you got here son! Thank you & Thank you again! :thumbup:
T-Macgnolia said:
Sorry but when i first opened the thread i did put the wrong download link up but I fixed it not long after that. If you look it has t0ltevzw in the name wich is what the Verizon device is named. I promise this build was made strictly for the i605.
Click to expand...
Click to collapse
Gotcha. I downloaded it within minutes of you starting the thread but didn't notice the file name issue (saying t0lte instead of t0ltevzw) until I nearly flashed it. I am grabbing the correct build right now but it probably won't be until later today until I get a chance to test drive it as I'm about to head off to work. :crying:
Great ROM, would recommend it. Once the reboot issue gets fixed it will be even better.
Sent from my Nexus 7 using Tapatalk 2
is there no power widget? or can i just not find it?
anyone else having issues with in call audio or speaker phone? can barely hear a thing on either.
Riztnack said:
anyone else having issues with in call audio or speaker phone? can barely hear a thing on either.
Click to expand...
Click to collapse
this is more of an AOSP issue...um, I may be mistaken but Plasma kernel has sound control which you can tinker with in Stweaks...give it a shot
I hate to be that guy but can anyone get a GPS lock on this ROM? I came directly from the illusion ROM and there I could get a lock in less than 5 seconds. This ROM couldn't get a lock at all. Just curious if this is my phone only.
FrankyFiggz27 said:
is there no power widget? or can i just not find it?
Click to expand...
Click to collapse
The power control widget is on the screen to the left of the main home screen as default if that is what your looking for. The advanced reboot options are on by default as well. As for a "power widget" we do not have a widget to control the power of the device as far as reboot or shut down.
Riztnack said:
anyone else having issues with in call audio or speaker phone? can barely hear a thing on either.
Click to expand...
Click to collapse
Sorry but this is a issue with this ROM, I have yet to figure out why though. There is some audio settings in Settings/Advanced that can help some.
ahjee said:
this is more of an AOSP issue...um, I may be mistaken but Plasma kernel has sound control which you can tinker with in Stweaks...give it a shot
Click to expand...
Click to collapse
Can you please link this kernel, I will test it and if it works i will add it as a work around for the sound issue, thanks in advance.
mimjun said:
I hate to be that guy but can anyone get a GPS lock on this ROM? I came directly from the illusion ROM and there I could get a lock in less than 5 seconds. This ROM couldn't get a lock at all. Just curious if this is my phone only.
Click to expand...
Click to collapse
Did you do a full wipe before you flashed? You should be getting a really fast lock on GPS. I usually get one within 2 to three seconds inside my house.
Yup, I clean flashed the ROM and no lock
I even tried formatting the internal but it gave me same results. Well, at least I know its something wrong with my phone.
For the audio problem I used the NEAK kernel along with the uNEAK engine app to blast my volumes all around. I used it for the illusion ROM but haven't tested it for this ROM. I don't see why it wouldn't work on this ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
smokenbiskits said:
So I love SlimRom, and all I really wanted to do was build it to go faster. Weeklies from Slim come out on Sundays, and I'll be realising my weeklies a few days later. I want to test stability before I give it to you. Anyways, I'm not responsible for what you do to your phone :angel: , and do a nandroid backup, because if you don't, you're stupid.
Click to expand...
Click to collapse
SlimFast is the project name and is based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
smokenbiskits said:
Thanks to Chet, Emmanuel, and the SlimRom team.
Future plans: build my own kernel, remove some apps, add some apps, clone to github
Here's a toolchain I built, based off Linaro 8.14 -o3, but I updated all the libraries to the newest ones:
GMP
Cloog
isl
mpc
mpfr
pkg-config
zlib
Dev-Host Toolchain
XDA-Toolchain
Click to expand...
Click to collapse
***INSTALLATION***
1. Factory Data reset
2. Wipe Cache/Dalvik
3. Format System/Data
4. Install SlimFast zip from Sdcard
5. Wipe Cache/Dalvik
6.Reboot device
7.boot back into recovery
8.Wipe Cache/Dalvik
9. Flash gapps
10.Wipe Cache/Dalvik
11. Reboot and Enjoy
**Notes**
DPI (lcd density) is set to 182 so everything may look tiny to y'all, can easily be changed with your favorite root explorer. navigate to system/build.prop and be sure to change permission to r/w before editing, make the edit to your liking save it and reboot...
***So you want to do a dirty flash?***
You could but i wouldn't recommend it and i wont give any support if you do. I like to treat flashing like sex, keep it clean and safe lol.
***DOWNLOADS***
SlimFast
PA Gapps
YourZgapps XS
Google Apps Slurms Edition for Android 4.4.x
***NOTE***
If your SD card isn't mounting like how it should do this edit all thanks to @vinman12
***Source Code***
Rom source soon to come, just waiting for it to get uploaded :good:
AD5GB's Kernel Source
***My Personal Thanks***
@smokenbiskits For allowing me to port his SlimFast rom.
@Kiltnar for allowing me to use his AOKP as base as well as kernel.
Contributors
smokenbiskits
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: SlimRom
Version Information
Status: Stable
Current Stable Version: Weekly 8.4
Stable Release Date: 2014-10-08
Created 2014-09-04
Last Updated 2014-10-08
EFF it!!! I'll just release it now for y'all crack flash addicts to enjoy lol
Me first..me first..pick me..!!
Oh..no line yet..lol. Thx for the new build. Will test as soon as I can download it. Thx again
---------- Post added at 11:54 PM ---------- Previous post was at 11:28 PM ----------
Well..since I hate media fire and can't see the stupid word to type and get the download. Guess I'll wait until I get home and use my laptop.
Media fire sucks.
Edit..didn't ask for password second time around..lol.
On a side note..like the gapps package links..some new ones I haven't tried. Thanks.
Gil81 said:
Me first..me first..pick me..!!
Oh..no line yet..lol. Thx for the new build. Will test as soon as I can download it. Thx again
---------- Post added at 11:54 PM ---------- Previous post was at 11:28 PM ----------
Well..since I hate media fire and can't see the stupid word to type and get the download. Guess I'll wait until I get home and use my laptop.
Media fire sucks.
Edit..didn't ask for password second time around..lol.
On a side note..like the gapps package links..some new ones I haven't tried. Thanks.
Click to expand...
Click to collapse
sorry bout that... MF can be a pita at times. personally ever since banks dropped support for his gapps I've been using slurms minimal gapps, IMHO its a great alternative for those like myself that just want minimal Google apps installed...
sent from my Liquid Smooth SGH-I717
At a glance...
Fast boot..which I've come to expect from almost all slim builds.
Been awhile since I used slim..forgot about the DPI difference. Might be worth noting in the op.
No theme support..again, been awhile..lol
Super Smooth transitions, fast responsive browser
I think I would run this as a daily..just from initial look. But I must have theme support and I would also have to change the DPI..but that would be easy enough.
All in all..nice build. I'll stick around and see how it develops..but for right now I'm going to give you're aokp a swing.:good:
Gil81 said:
At a glance...
Fast boot..which I've come to expect from almost all slim builds.
Been awhile since I used slim..forgot about the DPI difference. Might be worth noting in the op.
No theme support..again, been awhile..lol
Super Smooth transitions, fast responsive browser
I think I would run this as a daily..just from initial look. But I must have theme support and I would also have to change the DPI..but that would be easy enough.
All in all..nice build. I'll stick around and see how it develops..but for right now I'm going to give you're aokp a swing.:good:
Click to expand...
Click to collapse
I was thinking of changing the dpi from 182 to 210 but wasn't sure if users would want that, so I'll make a note of it in the op. thanks for the tip. i honestly don't think any slim builds will get theme engine, users have been requesting that for ages and hasn't happened.
what recovery and version is everyone using to flash this?
CUKIO34 said:
what recovery and version is everyone using to flash this?
Click to expand...
Click to collapse
I'm using twrp found in this post. http://forum.xda-developers.com/showpost.php?p=53240705&postcount=4
7.9 is now up, enjoy!
Gil81 said:
At a glance...
Fast boot..which I've come to expect from almost all slim builds.
Been awhile since I used slim..forgot about the DPI difference. Might be worth noting in the op.
No theme support..again, been awhile..lol
Super Smooth transitions, fast responsive browser
I think I would run this as a daily..just from initial look. But I must have theme support and I would also have to change the DPI..but that would be easy enough.
All in all..nice build. I'll stick around and see how it develops..but for right now I'm going to give you're aokp a swing.:good:
Click to expand...
Click to collapse
This is a very nice Rom and I plan on using as my daily. How could I go about changing the DPI? I will do research on this very topic, but figured I'd ask since you said it'd be simple. I would appreciate your help. Thanks, even though I know this isn't your rom.
dirtyalphaman said:
This is a very nice Rom and I plan on using as my daily. How could I go about changing the DPI? I will do research on this very topic, but figured I'd ask since you said it'd be simple. I would appreciate your help. Thanks, even though I know this isn't your rom.[/QUOT
there are apps on playstore that will change dpi
Click to expand...
Click to collapse
dirtyalphaman said:
This is a very nice Rom and I plan on using as my daily. How could I go about changing the DPI? I will do research on this very topic, but figured I'd ask since you said it'd be simple. I would appreciate your help. Thanks, even though I know this isn't your rom.
Click to expand...
Click to collapse
peterson65 said:
dirtyalphaman said:
This is a very nice Rom and I plan on using as my daily. How could I go about changing the DPI? I will do research on this very topic, but figured I'd ask since you said it'd be simple. I would appreciate your help. Thanks, even though I know this isn't your rom.[/QUOT
there are apps on playstore that will change dpi
Click to expand...
Click to collapse
+1 what peterson65 said. the way i do it is via "root explorer" (the app) navigate to system change permission to r/w open up build.prop and look for "ro.sf.lcd_density=182" and just change 182 to what ever like (320 is stock), save after making the edit and reboot to see it the change sticks.
Click to expand...
Click to collapse
Hey, I flashed this ROM today. Very nice looking and feeling, but I'm having one major issue. When I go to unlock my phone (hit the power button to turn the screen on), the screen doesn't turn on. The button is working. The capacitive buttons under the screen light up, but the actual screen doesn't turn on. I have to hit the power button 2-5 more times.
Anyone know what is up and how to fix it?
ct2020 said:
Hey, I flashed this ROM today. Very nice looking and feeling, but I'm having one major issue. When I go to unlock my phone (hit the power button to turn the screen on), the screen doesn't turn on. The button is working. The capacitive buttons under the screen light up, but the actual screen doesn't turn on. I have to hit the power button 2-5 more times.
Anyone know what is up and how to fix it?
Click to expand...
Click to collapse
raise your cpu speed or switch governor to wheatley. i haven't had to do either but sometimes i do got to push the power button two times...
dzee206 said:
raise your cpu speed or switch governor to wheatley. i haven't had to do either but sometimes i do got to push the power button two times...
Click to expand...
Click to collapse
Where are those option in this ROM? I can't seem to find them.
Also, why isn't Google Hangouts compatible with this?
ct2020 said:
Where are those option in this ROM? I can't seem to find them.
Also, why isn't Google Hangouts compatible with this?
Click to expand...
Click to collapse
you need to use an app to raise cpu speeds this rom doesn't have that feature built in, I'm using "setcpu". what do you mean not compatible? i just installed it fine, if you obtained it from gapps that might be why.
dzee206 said:
raise your cpu speed or switch governor to wheatley. i haven't had to do either but sometimes i do got to push the power button two times...
Click to expand...
Click to collapse
dzee206 said:
you need to use an app to raise cpu speeds this rom doesn't have that feature built in, I'm using "setcpu". what do you mean not compatible? i just installed it fine, if you obtained it from gapps that might be why.
Click to expand...
Click to collapse
Installing SetCPU now. I'll let you know if that works. For Hangouts, it wasn't in Gapps. I'm trying to get it from play store, but it says incompatible.
not sure why it would say that but try clearing play store data and try again.
sent from my Liquid Smooth SGH-I717
dzee206 said:
not sure why it would say that but try clearing play store data and try again.
sent from my Liquid Smooth SGH-I717
Click to expand...
Click to collapse
Cleared Store data. Same thing. Also tells me it's incompatible when I check from the desktop web Play Store.
Also, I don't seem to have root? I thought that any custom ROM would automatically have root access. What do I need to do to get Root so I can use SetCPU?
Thanks for all the help!
Thank you so much for continuing to build for our notes. Appreciate it very much! I love my note, and hate to give it up. . Be a few days before I'm able to load this, but when I do....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Exodus and our ROM are an open-source project coded by professional level developers with additional support from the community, focusing on improved versions of common features and improvements found in the open-source community while bringing new improvements and original coding with the highest standards.
Be rooted w/ a custom recovery
Download EXODUS Rom & Gapps for your device and move them to your phone
Reboot to Recovery
Wipe (Full wipe if coming from another Rom)**
Flash the Rom
Flash the Gapps**
Reboot to System
Setup and Reboot System
These directions are not necessary after the first install if you use the Exodus Updater, included in the ROM. It can notify you of updates, download, and install them for you automatically.
**This is automated if coming from a previous Exodus build (Dirty Flashing).
EXODUS - official: http://www.exodus-developers.net/exodus-5.1/
GApps: Any 5.1.x GApps of your choice
Rom source: https://github.com/TeamExodus
Gerrit: http://exodus-developers.net:8000
For additional support, info, and updates please join us in the official Google+ community:
https://plus.google.com/communities/106801227383087889476
Website:
http://www.exodus-developers.net/
Crowdin project:
Help us with translating to support your native language!
Thank you to all the members, contributors, and maintainers on the Exodus Team. Please
see our source for an unabridged list of contributions, authorship, and cherry-picks.
If you would like to thank us for our hard work or help support server costs you can do so here:
MartinRo (Server hosting)
Primedirective (Team Leader / Main developer)
Some videos created by savadam (all credits to him):
XDA:DevDB Information
TeamExodus, ROM for the HTC One (M8)
Contributors
phoenixita, Martin_Ro, PrimeDirective
ROM OS Version: 5.1.x Lollipop
Based On: CM
Version Information
Status: Testing
Created 2015-06-15
Last Updated 2015-06-26
ohh nice and fast!
Very smooth. Thanks been waiting on this.
Sent from my One M8 using Tapatalk
really love this rom. now gonna check the battery life. i saw that this rom supports xposed..has xposed been runninng for htc one m8 5.1.1? if yes, how can i install it?
Awesome rom you guys have here, can you guys merge in Sound Distortion Fix from CM found below (7 commits)
http://review.cyanogenmod.org/#/c/101062/
http://review.cyanogenmod.org/#/c/101063/
http://review.cyanogenmod.org/#/c/101064/
http://review.cyanogenmod.org/#/c/101065/
http://review.cyanogenmod.org/#/c/101066/
http://review.cyanogenmod.org/#/c/101067/
http://review.cyanogenmod.org/#/c/101118/
Kalyan_121 said:
really love this rom. now gonna check the battery life. i saw that this rom supports xposed..has xposed been runninng for htc one m8 5.1.1? if yes, how can i install it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3072979
Sent from my One M8 using Tapatalk
So far so good on my second day and don't feel the need to restore a backup. Thank you for the ROM
Sent from my One M8 using Tapatalk
Noticed an issue with using Nav rings shortcut for sound.
Ring/Silent makes a sound like it's working, but it actually doesn't.
Sprint M8 Converted HK 4.25.654.14
ROM is amazing so far, but one little annoying thing: DT2W works maybe half the time at best. The other half of the time, the phone doesn't respond at all, even if I tap it a few dozen times with varying speeds and locations on the screen. Contrasting that, DT2S works every single time, whether I do it from the status bar or with the Home key (I have it set double-tap on that too, since I really miss s2s on the navigation bar like is available on Sense kernels).
@phoenixita
Witch custom kernels can we run?
Just flashed the 5.1 Hypernova gpe
Sent from my One M8 using Tapatalk
jball said:
@phoenixita
Witch custom kernels can we run?
Just flashed the 5.1 Hypernova gpe
Sent from my One M8 using Tapatalk
Click to expand...
Click to collapse
Well, this uses the same kernel CM is using, so every kernel that works on cm based roms should be good!
Just want to thank you for the builds. This is my daily driver right now. The battery life is very nice so far.
Sent from my One M8 using XDA Forums Pro.
is anybody else having trouble with call quality? A lot of my callers can't hear me. Volume settings are fine
cquinn said:
is anybody else having trouble with call quality? A lot of my callers can't hear me. Volume settings are fine
Click to expand...
Click to collapse
I've been running this ROM for a week now. I haven't has any issues with callers not hearing me? Have you tried a clean flashed of the latest build? You didn't post much info bro. Its running super smooth on my end.
Sent from my One M8 using XDA Forums Pro.
I have posted this a couple place and have not got a response yet. Maybe u can help? With the new CM audio commits added I am getting a very faint popping sound coming from my speakers and continuously. I have attached a link to a screen recording with sound and you will have to run it up and listen closely but you can hear it right in the beginning and then again toward the end after I hit the home button. It does not do it when I run an RUU back to stock and never happened on any builds until these audio commits.
https://drive.google.com/file/d/0Bw-ARc6DtAVJX2QxbFJKdHg0dmc/view?usp=sharing
yung40oz84 said:
I have posted this a couple place and have not got a response yet. Maybe u can help? With the new CM audio commits added I am getting a very faint popping sound coming from my speakers and continuously. I have attached a link to a screen recording with sound and you will have to run it up and listen closely but you can hear it right in the beginning and then again toward the end after I hit the home button. It does not do it when I run an RUU back to stock and never happened on any builds until these audio commits.
https://drive.google.com/file/d/0Bw-ARc6DtAVJX2QxbFJKdHg0dmc/view?usp=sharing
Click to expand...
Click to collapse
I was having this issue as well. I turned off button sounds and it stopped.
Sent from my One M8 using XDA Forums Pro.
CPU
Sorry, i think i sent you a personal message by accident. I will write it here:
I've been using a kernel manager (Kernel Adiutor) and it seems that 2 of the 4 cores seem to always be off. Is there any way to re-enable them? And will Fast Charge be implemented into the rom? Awesome work!
- Roar
CPU continued
phoenixita said:
Roarmaster said:
I've been using a CPU manager (Kernel Adiutor) and I noticed that at all times, 2 of the 4 cores seem to always be parked. Is there any way to re-enable them? And will fast charge be included in the future? Awesome work!
Click to expand...
Click to collapse
All cores should be enabled.....for fast charge i don't think I should ask main dev maybe you need a custom kernel that let you enable all these settings.
Click to expand...
Click to collapse
I have made a clean reinstall and then downloaded cpu-z from the play store. Under the SoC tab, CPUs 0 & 4 are working fine and CPUs 2 & 3 are listed as "stopped". I cannot enable these cores whatsoever. I also cannot upload pictures or links yet due to my > 10 posts status. Is it possible for anyone else to confirm this?
on Update 2015-06-22.
- Roar
Roarmaster said:
I have made a clean reinstall and then downloaded cpu-z from the play store. Under the SoC tab, CPUs 0 & 4 are working fine and CPUs 2 & 3 are listed as "stopped". I cannot enable these cores whatsoever. I also cannot upload pictures or links yet due to my > 10 posts status. Is it possible for anyone else to confirm this?
on Update 2015-06-22.
- Roar
Click to expand...
Click to collapse
It may sound stupid but are you on battery saving mode?
phoenixita said:
It may sound stupid but are you on battery saving mode?
Click to expand...
Click to collapse
No I was not running battery saving mode. Even when I had set my governer to performance, it was still running on two cores. Well whatever was causing it seems to have been solved when I upgraded to version 2015-06-23 with OTA. Thanks for your concern.
-R
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SlimRoms is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
***disclaimer***
While I make every effort to test these builds as much as possible, I am not responsible for anything that may happen to your device.
I ask that you do your part to know your device and know how to recover from problems before you flash!
If you are smart enough to download and flash software then you should be smart enough to assume all responsibility for modifying your device and take steps to ensure you have backups and a recovery plan in place.
I am not responsible for thermonuclear war or you bricking your device and smashing it against a wall after you made a hockey puck out of it.
ROM is built from current SlimLP source and uses the RRO Layers engine. I have a different ROM build using CM Themes and posted this to provide users with a choice. I built this as a hobby project because the SMT-900 has been sadly neglected by devs and because I've always been impressed with SlimRoms features and reliability. I hope you like it as much as I do. None of this would be possible without the time spent, hard work and dedication of the following devs:
chhaggerty for his device and vendor repos
crpalmer for the initial bring up work on all the tab family
The SlimRoms Team
Cyanogenmod
Liquidsmooth
THANKS!
YOU WILL NEED TO DOWNLOAD THE BITSYKO LAYERS MANAGER FROM THE PLAYSTORE TO INSTALL LAYERS PACKAGES!
KNOWN ISSUES/BUGS
Let me know nothings perfect!
DOWNLOAD
link to download site:
SlimLP 5.11 Tab Pro 12.2
INSTALLATION:
I recommend a full wipe AFTER YOU MAKE A NANDROID BACKUP OF YOUR CURRENT SETUP!! This ensures no leftovers get in the way and we all know where you started from! Updates can be done via standard reset wipe.
RECOVERY AND GAPPS:
I use and recommend TWRP RECOVERY and FLASHIFY [ROOT] from play store to update TWRP via .img files.
I like SLIMS GAPPS myself PA work well too..
SOURCE CODE:
SlimRoms-Github
Device Source
Vendor Source
Kernel Source
XDA:DevDB Information
SlimLP 5.11 for Tab Pro 12.2 , ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
wargear
Source Code: http://www.github.com/slimroms
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Current Beta Version: ver-2
Beta Release Date: 2015-10-12
Created 2015-10-15
Last Updated 2015-10-15
Reserved
Reserved
bout time, was waiting for you to get this out:good:
one thing I noticed on 1st boot (screen took 15 sec to turn back on from lock screen) long delay
maybe want to attach a link to supersu for those who want root
even after flashing supersu and clocking min to min and max to max(in setcpu)
screen took 15 sec to turn back on from lock screen
min free values probably need to be adjusted?
toolhas4degrees said:
bout time, was waiting for you to get this out:good:
one thing I noticed on 1st boot (screen took 15 sec to turn back on from lock screen) long delay
maybe want to attach a link to supersu for those who want root
even after flashing supersu and clocking min to min and max to max(in setcpu)
screen took 15 sec to turn back on from lock screen
min free values probably need to be adjusted?
Click to expand...
Click to collapse
Thanks for the comments in testing! I did a clean install verified everything worked and went back to my other rom which I prefer as my daily. I'm doing a full setup now and app install and will make a backup so I can jump back to check issues. The builtin SU works fine for me although I too prefer SuperSU Pro will check things out.
Wow, another new toy. You make me believe it's Christmas. I will definitely try this out, tonight or tomorrow./arc
arcadia2uk said:
Wow, another new toy. You make me believe it's Christmas. I will definitely try this out, tonight or tomorrow./arc
Click to expand...
Click to collapse
ROFLMAO!!
Lets all hope that 6.0 isn't as problematic to build for as 5.1.1 just waiting for teams to finish merging code...
Oh man, I never thought I'd see this for our device! Thank you!
The Xposed-v75-sdk22-arm was the xposed version I finally got working with this ROM.
Is there a way to turn of the lockscreen altogether inside the ROM, or am I better off finding an xposed module for this?
I find both the Slim and Liquid smooth difficult to wake up, is there a screen sensitivity setting somewhere that I missed?
arcadia2uk said:
The Xposed-v75-sdk22-arm was the xposed version I finally got working with this ROM.
Is there a way to turn of the lockscreen altogether inside the ROM, or am I better off finding an xposed module for this?
I find both the Slim and Liquid smooth difficult to wake up, is there a screen sensitivity setting somewhere that I missed?
Click to expand...
Click to collapse
Bump the minimum frequency up for the wake delay & I think you can disable lockscreen in settings/security. Actually this doesn't fix it once the device is asleep for a while. It goes back to the wake delay. I'm also seeing a small amount of lag here and there. Sometimes when I'm looking through recents, it gets a little jittery. All in all though, it's a great first release.
nickster1 said:
Bump the minimum frequency up for the wake delay & I think you can disable lockscreen in settings/security. Actually this doesn't fix it once the device is asleep for a while. It goes back to the wake delay. I'm also seeing a small amount of lag here and there. Sometimes when I'm looking through recents, it gets a little jittery. All in all though, it's a great first release.
Click to expand...
Click to collapse
Thanks Nickster, disabling the lockscreen worked under settings/security/screen security/Screen lock/ then set it to "none"
What app are you using for bumping up the the min frequency for the wake delay?
arcadia2uk said:
Thanks Nickster, disabling the lockscreen worked under settings/security/screen security/Screen lock/ then set it to "none"
What app are you using for bumping up the the min frequency for the wake delay?
Click to expand...
Click to collapse
On this one I'm using fauxclock, but there are many great free apps in the playstore that would do the same thing. Kernel Auditor & Synapse are both free. Bumping the minimum cpu frequency will not help if the device goes back into a deep sleep though.
nickster1 said:
Bump the minimum frequency up for the wake delay & I think you can disable lockscreen in settings/security. Actually this doesn't fix it once the device is asleep for a while. It goes back to the wake delay. I'm also seeing a small amount of lag here and there. Sometimes when I'm looking through recents, it gets a little jittery. All in all though, it's a great first release.
Click to expand...
Click to collapse
Many thanks nickster, as an app & ROM junkie I have the faux apps, so I'll try playing around with it./arc
---------- Post added at 11:30 PM ---------- Previous post was at 11:09 PM ----------
wargear said:
ROFLMAO!!
Lets all hope that 6.0 isn't as problematic to build for as 5.1.1 just waiting for teams to finish merging code...
Click to expand...
Click to collapse
Maybe, with this speed you might even take on the OmniRom, and to have them all under your fingertips with the MultiROM, that Bonuzzz's tried porting on the KitKat at one time? This would be even more than Christmas, but anniversary at the same time I know I'm asking a lot, but I recently started to believe in Santa!!!
arcadia2uk said:
Many thanks nickster, as an app & ROM junkie I have the faux apps, so I'll try playing around with it./arc
---------- Post added at 11:30 PM ---------- Previous post was at 11:09 PM ----------
Maybe, with this speed you might even take on the OmniRom, and to have them all under your fingertips the MultiROM, that Bonuzzz's tried porting on the KitKat at one time? This would be even more than Christmas, but anniversary at the same time
Click to expand...
Click to collapse
LMAO!!
Jeez! You guys must think I have too much free time on my hands! LOL! Lemme get my truck rebuilt and back on the road first.... seriously, thanks everyone for the support and kind comments you guys make it worth the effort!
arcadia2uk said:
Many thanks nickster, as an app & ROM junkie I have the faux apps, so I'll try playing around with it./arc
---------- Post added at 11:30 PM ---------- Previous post was at 11:09 PM ----------
Maybe, with this speed you might even take on the OmniRom, and to have them all under your fingertips with the MultiROM, that Bonuzzz's tried porting on the KitKat at one time? This would be even more than Christmas, but anniversary at the same time I know I'm asking a lot, but I recently started to believe in Santa!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/software-hacking/tool-multirom-recovery-replacement-t3102395
has anyone tried this for multirom
Can anyone confirm if Citrix Receiver works on this ROM?
Thanks appreciate the hard work from the dev.
Sent from my SM-T900 using XDA Free mobile app
I'm so happy to read that another dev has found love for our Tab Pro 12.2. The wake up delay has happened to me after I have tried the Samsung 5.1 rom. Before I have been on @charggerty cm for months without the delay. When I restored back my cm backup the delay was there. Also after going back with Odin to previous Samsung stock and restored the cm backup afterwards the delay was there. Now I'm on stock rooted Samsung 5.1 because i cannot stand the delay. Could that have happened through bootloader upgrade? But i thought that Odin would flash the bootloader back?
Planet X said:
I'm so happy to read that another dev has found love for our Tab Pro 12.2. The wake up delay has happened to me after I have tried the Samsung 5.1 rom. Before I have been on @charggerty cm for months without the delay. When I restored back my cm backup the delay was there. Also after going back with Odin to previous Samsung stock and restored the cm backup afterwards the delay was there. Now I'm on stock rooted Samsung 5.1 because i cannot stand the delay. Could that have happened through bootloader upgrade? But i thought that Odin would flash the bootloader back?
Click to expand...
Click to collapse
What delay are you talking about?
Sent from my Note 3 running Jasmine 6.1 stock
midimench said:
What delay are you talking about?
Sent from my Note 3 running Jasmine 6.1 stock
Click to expand...
Click to collapse
If you upgrade to the 5.1.1 firmware, there is a delay when you hit the power button to turn the screen on after it's been sleeping for a while.
nickster1 said:
If you upgrade to the 5.1.1 firmware, there is a delay when you hit the power button to turn the screen on after it's been sleeping for a while.
Click to expand...
Click to collapse
I just wanted to reply and see that you already have given the right answer. It's indeed the wake up delay I was writing about @midimench.
---------- Post added at 07:41 AM ---------- Previous post was at 07:39 AM ----------
nickster1 said:
If you upgrade to the 5.1.1 firmware, there is a delay when you hit the power button to turn the screen on after it's been sleeping for a while.
Click to expand...
Click to collapse
That's right. Do you have an idea how to get rid of that?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub...
Disclaimer:
This is an unofficial release and is prone to changes that may/may not reflect in the future official release.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! These builds are experimental and can contain Bugs (as listed above). Make sure to do backups.
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
5) Please keep bugreports to this thread or Discord. Do NOT create a Jira ticket. This is still in early development so we don't accept any bugreports yet.
Download ROM
Twrp
Firmware,vendor(thanks to jerry)
INSTALLATION PROCEDURE:
Have an unlocked bootloader, and custom recovery installed/booted
(Not gonna be explained here, there'll be threads in this forum somewhere)
Reboot to recovery
Make sure your device is with RealmeUI firmware
Flash ROM zip
Flash Gapps
Format data (don't report anything bugs if you dirty flashed over another ROM)
I can't thank @karthick111 & @phhusson enough for their contribution on realme X2 Pro device.
Also thanks to @Sathish, @4j17h and tester @Nuaman
Device specific features:
* DC dimming (flicker free feature). check Settings -> Realme Settings
* SRGB Mode Check Settings -> Realme Settings
* Game mode (touch boost). check Settings -> Realme Settings
* Toggle for display hz (auto, forced 90hz). check Settings -> Realme Settings
* Ambient gestures (Pickup, handwave & pocket). check Settings -> Display -> Lockscreen display -> Ambient display
KNOWN ISSUES:
you tell if you found it.
kernel source
XDA:DevDB Information
Carbon, ROM for the Realme X2 Pro
Contributors
arunassain
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: C28
Version Information
Status: Stable
Stable Release Date: 2020-07-18
Created 2020-07-18
Last Updated 2020-09-19
Reserved
WOW thank you for releasing another option for us CN ROM users. Though I just install and checking LOS (Latest) after I check this will try this next as seeing that this is tagged as STABLE. and also waiting for other users to test and see. Kudos!
Any Screenshots?
Thanks for the smooth and stable stock Android experience.. Great job!
Only thing missing is face unlock. Can't find it in the settings. Not a big deal for me. ?
nattanarcilla said:
Thanks for the smooth and stable stock Android experience.. Great job!
Only thing missing is face unlock. Can't find it in the settings. Not a big deal for me. ?
Click to expand...
Click to collapse
Face unlock is taken down by almost all ROMs due to OEM DMCA
Hello, Does CarbonROM has LiveDisplay like lineageos has ?(Change the white point of the display )
I can't add outlook account. App keeps force closing.
Edit: It works after I restart the phone
Silly question?
I couldn't find up to date information on the main web site about the features and the enhancements of this ROM.
I need also to know whether it is based on other ROMs (besides the AOSP by Google).
Thanks in advance.
or965 said:
Hello, Does CarbonROM has LiveDisplay like lineageos has ?(Change the white point of the display )
Click to expand...
Click to collapse
No It doesn't have live display
I'm having random reboot and some apps force closing from time to time.. Don't know what is causing this issue. Anyone having the same problem?
nattanarcilla said:
I'm having random reboot and some apps force closing from time to time.. Don't know what is causing this issue. Anyone having the same problem?
Click to expand...
Click to collapse
I didn't face anything such but chromium based browsers crashes maybe it will be fixed by next build
Here is my 1 Week Review of the ROM:
Everything Works , except entire camera like RUI. FP works, I got my Banking App work unlike LOS with Magisk (20.3).
There are some slight issues: sorry I dont know how to send logcat or even to have it.
Random Reboots - turning Mobile Data + GPS 2 times already same scenario using a Food App. Also Changing Mobile Network Type. (There is a lot of options: I use LTE/TDSCDMA/GSM/WCDMA here in Philippines) Also got a random reboot testing all of the network type. Maybe there is a issue with Mobile Data? Not so sure.
Unlocking the phone via FP sometimes doesnt turns on the screen even I hear the unlocking sound. I have to press the power to turn off and unlock again.
AOD is not 100% active as most of the case I have to turn on the device ( i dont have any battery saving option turned on) and the screen is entire blank and not sure why is FP not responding that moments. Maybe you can look into it? or advise in case I have missed something.
Battery is great even I dont have to worry since I can charge this quickly. Games like Mobile Legends are great. havent test CODM but soon. (I realize that ML seems not locking 60FPS really as I got 59.1 - 59.9 this is clearly the ML's dev fault)
Nontheless I am Happy as I can enjoy the ROM . Kudos and more power! looking foward to test your new updates regarding this ROM.
PS. do we will have a performance update on this ROM? Cheers!
omnislice said:
Here is my 1 Week Review of the ROM:
Everything Works , except entire camera like RUI. FP works, I got my Banking App work unlike LOS with Magisk (20.3).
There are some slight issues: sorry I dont know how to send logcat or even to have it.
Random Reboots - turning Mobile Data + GPS 2 times already same scenario using a Food App. Also Changing Mobile Network Type. (There is a lot of options: I use LTE/TDSCDMA/GSM/WCDMA here in Philippines) Also got a random reboot testing all of the network type. Maybe there is a issue with Mobile Data? Not so sure.
Unlocking the phone via FP sometimes doesnt turns on the screen even I hear the unlocking sound. I have to press the power to turn off and unlock again.
AOD is not 100% active as most of the case I have to turn on the device ( i dont have any battery saving option turned on) and the screen is entire blank and not sure why is FP not responding that moments. Maybe you can look into it? or advise in case I have missed something.
Battery is great even I dont have to worry since I can charge this quickly. Games like Mobile Legends are great. havent test CODM but soon. (I realize that ML seems not locking 60FPS really as I got 59.1 - 59.9 this is clearly the ML's dev fault)
Nontheless I am Happy as I can enjoy the ROM . Kudos and more power! looking foward to test your new updates regarding this ROM.
PS. do we will have a performance update on this ROM? Cheers!
Click to expand...
Click to collapse
Random reboots for some people but I didn't face it well for me chromium based browsers crashes anyway I will try to fix it those , performance? same as other ROMs i guess
Specifically for CN version of X2 Pro ?
Will it work on IN/EU phones ?
RxShivamGamer said:
Specifically for CN version of X2 Pro ?
Will it work on IN/EU phones ?
Click to expand...
Click to collapse
I think they mean either "RMX1931" or "RMX1931CN".
---------- Post added at 04:28 PM ---------- Previous post was at 04:24 PM ----------
arunassain said:
Random reboots for some people but I didn't face it well for me chromium based browsers crashes anyway I will try to fix it those , performance? same as other ROMs i guess
Click to expand...
Click to collapse
Random reboots and FCs usually vanish with a totally clean install (no backup+restore, no dirty flashing).
Uqbar said:
I think they mean either "RMX1931" or "RMX1931CN".
Mine is "RMX1931EX" so I guess it's incompatible.
Btw thanks for the real quick reply.
Click to expand...
Click to collapse
RxShivamGamer said:
Specifically for CN version of X2 Pro ?
Will it work on IN/EU phones ?
Click to expand...
Click to collapse
It works for all
arunassain said:
It works for all
Click to expand...
Click to collapse
Then OP title should be "fixed"...
arunassain said:
It works for all
Click to expand...
Click to collapse
Really ??? That's cool !!!
Can you help me for one more thing ?
Selinux permissive or enforcing ?
Thanks