Hi all
Probably a dumb question but here it goes
I'm on Existenz Premium 3.5.0 (IMHO the best Z2 ROM in existence) and of course I want to move to 4.0.0.
Is it possible to just do the "usual" steps of:
- reboot in recovery
- install the 4.0.0 zip
- wipe dalvik and cache
- reboot
Or does this require a full wipe before installing the 4.0.0?
Thanks in advance for your help.
micheleamerica said:
Hi all
Probably a dumb question but here it goes
I'm on Existenz Premium 3.5.0 (IMHO the best Z2 ROM in existence) and of course I want to move to 4.0.0.
Is it possible to just do the "usual" steps of:
- reboot in recovery
- install the 4.0.0 zip
- wipe dalvik and cache
- reboot
Or does this require a full wipe before installing the 4.0.0?
Thanks in advance for your help.
Click to expand...
Click to collapse
niaboc79 said:
INSTALL INSTRUCTIONS
...
From eXistenZ Y v3.x.x:
Reboot in recovery.
Flash the rom.
Flash update if available.
...
Click to expand...
Click to collapse
Sent from my D6503 using Tapatalk
Related
Hello guys,
I have a (rather silly) question regarding mod installing on RR 3.0.9 - Let's say I installed the mod and want to remove it, what should I do? Do I have to re-flash the ROM?
The mods are from the RR website:
htt p:// ww w. resurrectionremix. com / index.php? action=tpmod;dl=cat216
Thanks,
DFN
douglasfneves said:
Hello guys,
I have a (rather silly) question regarding mod installing on RR 3.0.9 - Let's say I installed the mod and want to remove it, what should I do? Do I have to re-flash the ROM?
Thanks,
DFN
Click to expand...
Click to collapse
Yes, you reflash the Rom again and wipe both cache and dalvik cache.
douglasfneves said:
Hello guys,
I have a (rather silly) question regarding mod installing on RR 3.0.9 - Let's say I installed the mod and want to remove it, what should I do? Do I have to re-flash the ROM?
Thanks,
DFN
Click to expand...
Click to collapse
For Some u have the Default one's which can be flashed back to get the Original Settings
and for some i am afraid u have to flash back the rom for sure
I leave here the JB 4.1.2 Leak in a Deodexed version. (For testing)
- Don't use Preload.
- It's a complete ROM , not only app and framework.
- Busybox
DISCLAIMER 1:
I am not responsible in ANY way if this bricks your phone/ goes into bootloop. You, and YOU ONLY, is responsible for what happened to your phone.
To avoid problems with system size, the ROM don't have some apps like chaton or music_hub . If you need to install some of them you can install those after.
I removed some ringtones too.
Because that , is important to build a good preload version.
Installation:
Copy zip to SD Card
Download and install CWM 6.0.2.8
Do a Backup (You can use it to restore data if you want to wipe data/factoryreset in this step)
Format system from CWM to have a fresh installation.
Install zip from CWM
[Optional] wipe cache/dalvik-cache
If you don't format data or wipe data/factory reset, you will have your previous phone but deodexed.
Reboot
Download
Version 2.1 : 22/02/2013 : http://d-h.st/nVS To have root after flash the ROM, flash root.zip from Shaaan
Version 2 : 19/02/2013 : http://d-h.st/OF8
Version 1 : http://d-h.st/2zE
Credits:
01. Shaaan: CWM and a lot of things
02. Frappeti Deodexed ROM in Galaxy Advance
03. Exelter : His deodexed ROM.
If you want to enable the Ripple Effect from Kirillos flash this zip:
http://d-h.st/UUr
Credits to Kirillos
cbolumar said:
I leave here the JB 4.1.2 Leak in a Deodexed version. (For testing)
- Don't use Preload.
- It's a complete ROM , not only data and framework.
- Busybox and root included.
Click to expand...
Click to collapse
-Complete ROM? can u specify that a little more than just (not only data and framework)
-Preload?
-What is the difference between this Rom and Estelter's one?
mojito0 said:
-Complete ROM? can u specify that a little more than just (not only app and framework)
-Preload?
-What is the difference between this Rom and Estelter's one?
Click to expand...
Click to collapse
This is a complete ROM : app, lib,etc,xbin,framework,.....build.prop,.. You have a new system and because that, you can use it as base to build a custom ROM.
Estelter change the app and framework directories to deodex apps and jars but you need flash the others system directories with odin before.
Preload is a specific area Sansung use like a extension of the system partition. In GB we don't use that area. I remove some apps from /system/app and the system partition size is enough . I don't need at the moment the preload partition.
Can I flash this zip from GB??
loof13 said:
Can I flash this zip from GB??
Click to expand...
Click to collapse
Not. You must use Odin the first time because :
- You need to change the partitions map to JB
- Flash the JB modem, kernel, baseband, CSC, etc.
This ROM is a complete /system . It is the part of the ROM we change in the custom ROMS.
Maybe not the smartest question, but...
Can i change vold.stab and framework-res.apk inside your pack, so that i want to have both effect right after ROM installation (vold.stab already switched, so there could be some mess if i don't change it before flashing of the rom)?
judas1977 said:
Maybe not the smartest question, but...
Can i change vold.stab and framework-res.apk inside your pack, so that i want to have both effect right after ROM installation (vold.stab already switched, so there could be some mess if i don't change it before flashing of the rom)?
Click to expand...
Click to collapse
Yes , no problem.
What about flash counter ? It will rise up after flash ?
AW: [ROM] Deodexed XXMB2 without Preload
michal_ag said:
What about flash counter ? It will rise up after flash ?
Click to expand...
Click to collapse
It raise up if you use odin.
But you can reset counter
Sent from my GT-I8160 using xda app-developers app
michal_ag said:
What about flash counter ? It will rise up after flash ?[/QUOTE
Non because you use odin with stock ROM. After you flash this ROM using CWM. Your counter remain 0.
Click to expand...
Click to collapse
when you insert the headphones the sound is played outside speaker.. please fix this bug
Odp: [ROM] Deodexed XXMB2 without Preload
I confirm audio routing issue. I just thought that my phone is broken. Good to know that's rom's bug
Wysyłane z mojego GT-I8160 za pomocą Tapatalk 2
BUG Found: Video Recording does not work. I can take pictures though.
Version 2
I left version 2 in the first post. I think it resolve both bugs.
cbolumar said:
I left version 2 in the first post. I think it resolve both bugs.
Click to expand...
Click to collapse
yep the bugs are resolved but now the rom aren't rooted, and after flash the root by shaan supersu doesn't work.. are u any ideas?
slade9220 said:
yep the bugs are resolved but now the rom aren't rooted, and after flash the root by shaan supersu doesn't work.. are u any ideas?
Click to expand...
Click to collapse
OK , yesterday i didn't have time to fix it. I hope to fix it today.
R: [ROM] Deodexed XXMB2 without Preload
cbolumar said:
OK , yesterday i didn't have time to fix it. I hope to fix it today.
Click to expand...
Click to collapse
I ceck with adb and in the system/xbin the file 'su' is missing.. i hope this can help you, thanks for your work!
Inviato dal mio GT-I8160 con Tapatalk 2
Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.
cbolumar said:
Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.
Click to expand...
Click to collapse
check updater-script
cbolumar said:
Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.
Click to expand...
Click to collapse
Put the root files in the rom. But you need to set the correct permissions if you want it to work.
Sent from my Galaxy Ace 2 i8160
Hi everyone,
I have an unlocked Xperia Ray.
I am trying (in the last 2 days) to install Super Jelly Bean 5.5 Rom with no succes (yet)
the steps are:
1. flash stock firmware ST18i_4.1.B.0.587_1252-3693.ftf using Fasttool
2. root the device using http://forum.xda-developers.com/showthread.php?t=2118343
3. install CWM using SE_Extreme_Tweak_Installer_1.8
4. flash urushi_fusion_5.4.img Fasttool
5. wipe all data and install zip (Super Jelly Bean 5.5 Ray.zip and gapps-jb-20130624-sjb 4.1.2.zip)
no errors on install
after reboot it is starting a bootloop (never boots just shows Sony logo, no bootanimation)
tzontzonelro said:
Hi everyone,
I have an unlocked Xperia Ray.
I am trying (in the last 2 days) to install Super Jelly Bean 5.5 Rom with no succes (yet)
the steps are:
1. flash stock firmware ST18i_4.1.B.0.587_1252-3693.ftf using Fasttool
2. root the device using http://forum.xda-developers.com/showthread.php?t=2118343
3. install CWM using SE_Extreme_Tweak_Installer_1.8
4. flash urushi_fusion_5.4.img Fasttool
5. wipe all data and install zip (Super Jelly Bean 5.5 Ray.zip and gapps-jb-20130624-sjb 4.1.2.zip)
no errors on install
after reboot it is starting a bootloop (never boots just shows Sony logo, no bootanimation)
Click to expand...
Click to collapse
unlocked your bootloader?
karthi1 said:
unlocked your bootloader?
Click to expand...
Click to collapse
yes is unlocked
oh god
did u try any other kernel ????
---------- Post added at 09:35 PM ---------- Previous post was at 09:30 PM ----------
try these steps ,
after going into CWM recovery
Go to Mounts and storage > wipe cache , wipe Data & wipe system
Go to advanced > wipe Dalvik-cache
Now install from SD card......
karthi1 said:
oh god
did u try any other kernel ????
Click to expand...
Click to collapse
original kernel, fusion 5.4 (from zip and from another source) and 5.5
karthi1 said:
---------- Post added at 09:35 PM ---------- Previous post was at 09:30 PM ----------
Click to expand...
Click to collapse
karthi1 said:
try these steps ,
after going into CWM recovery
Go to Mounts and storage > wipe cache , wipe Data & wipe system
Go to advanced > wipe Dalvik-cache
Now install from SD card......
Click to expand...
Click to collapse
I followed this steps every time
tzontzonelro said:
original kernel, fusion 5.4 (from zip and from another source) and 5.5
I followed this steps every time
Click to expand...
Click to collapse
try 2.6 kernels or 3.x kernels.....
it may work.........
karthi1 said:
try 2.6 kernels or 3.x kernels.....
it may work.........
Click to expand...
Click to collapse
3.0.8-nAa-03_ST18.img not working
LuPuS_urushi_jBv9.1-full.img trying now
tzontzonelro said:
3.0.8-nAa-03_ST18.img not working
LuPuS_urushi_jBv9.1-full.img trying now
Click to expand...
Click to collapse
Hope it works............
karthi1 said:
Hope it works............
Click to expand...
Click to collapse
not working
tzontzonelro said:
not working
Click to expand...
Click to collapse
There can't be any problem with ROM < because thousands of people around world are using SJB>
Problem must be in the kernel.. is there any other kernel we didn't try???
Post Fastboot log (the bunch of text, which is shown in Flashtool or the fastboot window) of the kernel installation.
me too.
tzontzonelro said:
Hi everyone,
I have an unlocked Xperia Ray.
I am trying (in the last 2 days) to install Super Jelly Bean 5.5 Rom with no succes (yet)
the steps are:
1. flash stock firmware ST18i_4.1.B.0.587_1252-3693.ftf using Fasttool
2. root the device using http://forum.xda-developers.com/showthread.php?t=2118343
3. install CWM using SE_Extreme_Tweak_Installer_1.8
4. flash urushi_fusion_5.4.img Fasttool
5. wipe all data and install zip (Super Jelly Bean 5.5 Ray.zip and gapps-jb-20130624-sjb 4.1.2.zip)
no errors on install
after reboot it is starting a bootloop (never boots just shows Sony logo, no bootanimation)
Click to expand...
Click to collapse
supar jelly bean is also creating problem fr me 2. I did everything right but I only got boot screen for 40 minuts!!!!
nuts!!! can u belive it??
INFO:
What is super user mod ?
Some of the app from xperia zu .......etc .... Is not installing after moving into system with correct permission
after installing this mod will enable the user to use app with out any problem SUCH AS WIDGETS , WALKMAN, ETC FROM XPERIA ZU.....
NEDDED
ROOTED AND DEODEXED ICS .587 or .13 FIRMWARE.
INSTALLATION:
1. WIPE CACHE & DALVIK CACHE... FLASH THE ZIP... WIPE DALVIK CACHE ...
2.REBOOT AND INSTALL THE APP YOU WANT......ENJOY
DOWNLOAD
Amazing :thumbup::thumbup:
Thanks!!
nilimahona said:
INFO:
What is super user mod ?
Some of the app from xperia zu .......etc .... Is not installing after moving into system with correct permission
after installing this mod will enable the user to use app with out any problem SUCH AS WIDGETS , WALKMAN, ETC FROM XPERIA ZU.....
NEDDED
ROOTED AND DEODEXED ICS .587 or .13 FIRMWARE.
INSTALLATION:
1. WIPE CACHE & DALVIK CACHE... FLASH THE ZIP... WIPE DALVIK CACHE ...
2.REBOOT AND INSTALL THE APP YOU WANT......ENJOY
DOWNLOAD
Click to expand...
Click to collapse
Is your services.jar files is included with LED notification fixes???
Does this allow us to take any ZU/Z1 apps? I mean, we don't need to wait for someone to port to ICS first?
masteriori said:
Does this allow us to take any ZU/Z1 apps? I mean, we don't need to wait for someone to port to ICS first?
Click to expand...
Click to collapse
Is true, need port the apps first... ICS 4.0.4= Sdk 15, JB 4.2.2= Sdk 17, conclusion: The apps don't works with the Superuser mod... you need port xD
Ps: Prove with the ports for JB 4.1.2... maybe works xD
Hey guys Here I m Presenting Sony Cyber-Shot camera app
for all android devices.
.
* How to install : -
1) Download The zip.
2) Boot into Any Custom Recovery.
3) Wipe cache, Wipe Dalwik cache.
4) choose zip from SD card Select Cyber-Shot.zip
5) after flashing complete Reboot device
6) Enjoy
Download Cyber-shot zip
Click Here
Please Hit one thanks if you liked my work
is it support for JB device?
1. Can you please add some screenshots?
2. I don't think that this is the best place for your thread. Please ask a moderator to move your thread to Apps & Games section :good:
WongJW said:
is it support for JB device?
Click to expand...
Click to collapse
+1
Do you have some screenshots?? Thanks!!
Jatin Purav(i m hardwell) said:
Hey guys Here I m Presenting Sony Cyber-Shot camera app
for all android devices.
.
* How to install : -
1) Download The zip.
2) Boot into Any Custom Recovery.
3) Wipe cache, Wipe Dalwik cache.
4) choose zip from SD card Select Cyber-Shot.zip
5) after flashing complete Reboot device
6) Enjoy
Download Cyber-shot zip
Click Here
Please Hit one thanks if you liked my work
Click to expand...
Click to collapse
this my app port
see on this thread
http://forum.xda-developers.com/galaxy-s4/themes-apps/mod-cyber-shot-t2963997
EMINEM786 said:
this my app port
see on this thread
http://forum.xda-developers.com/galaxy-s4/themes-apps/mod-cyber-shot-t2963997
Click to expand...
Click to collapse
See The Date Of the thread created
What is Max mega pixel for cybershot zip???