Hello,
I recently got a used Galaxy S3 I9300. I wanted to install temasek's UNOFFICIAL CM12.1. I already installed CWM on my old Galaxy S2.
Now I got a ridiculous problem; I cannot get CWM or TWRP installed via Odin. This is what I did, in every detail:
a) Turn on USB Debugging (not even sure if necessary)
b) Started in DOWNLOAD-MODE by Voldown+Home+Power
b1) Funnily, it already confirms that I tried to install "Custom Binary Download" 4 times but otherwise is unimpressed. Current binary is still "Samsung Official".
b2) I connect via USB and start ODIN 3.10.7 in Admin mode.
b3) It recognizes the telephone, I have "Auto Reboot" and "F. Reset Time" selected, nothing else. Then I select the .tar I want (i tried "twrp-2.8.6.1-i9300.tar" and "CWM_6.0.4.7_Touch_GT-I9300.tar"), AP box is checked.
b4) I press start, Odin says that everything is fine and signals "Pass".
c) Now, when I start into recovery mode by Volup+Home+Power I still land in the default recovery. This is really annoying.
What am I doing wrong?
Thanks a lot in advance
Greetings
untrue
Related
Hello there,
Well, my Galaxy S 2, after uninstalling a program, got an error (black screen, need to restart...) and so doesn't start anymore (freezes at "Samsung Galaxy S II" screen) or enter in recovery mode (freezes with the robot on background, without letters). I have the download mode yet.
I tried to flash a rom with odin, but it freezes at "NAND write start" process (I've waited 30 min), and I have to abort disconecting the phone.
Could anyone help me?
Thanks
You get into the download mode. That's good. The flashing fails. That's not good.
We need more info to help you. The fact that you had some error and now cannot flash some firmware does not really help us. At least me...
Here are some questions I have:
What firmware did you try to flash?
What Operating System are you using?
Do you have KIES installed?
or
Where do you got the drivers from?
Did ODIN work in the past or did you never use it before?
Sent from my GT-I9100 using XDA App
Thank you for answering.
I've never flashed any firmware before on this phone (it has the original one). I tried to flash the stock XXKI1, using just the PDA field. So, Odin still at "NAND write start" part.
As I said, I had an error after uninstalling an app (launcher error), that I've forced to remove the battery. After that, the phone didn't start anymore (freeze at "Samsung Galaxy SII" screen), and I can't enter in recovery mode.
I don't have Kies installed (got the drivers separated).
Sorry that it took me so long to answer you.
If you still have the problem, I'll try my best to guide you through the process of restoring your device.
What do you want to install on your device?
-A stock rom
-A customrom based on TouchWiz
-CyanogenMod
-MIUI
Just let me know and I'll help you asap.
A stock rom...
Okay, where do you live? Or more accurate, what language do you want to use later?
Your first step is to get the "Heimdall Suite" up and running on your PC.
Download it from their homepage. Extract it somewhere where you can easily find it later. Then you'll need to install the drivers.
Put your phone into download-mode and plug it in. If they aren't installed yet, Windows will now start the installation. When completed, open the "drivers"-folder in the Heimdall folder. Run "zDiag" as administrator.
Enable the show all devices option and select either "Samsung USB composite device" or "Gadget serial" (depending on what's available in your dropdown-list). Install the driver and ignore the warning from Windows (install it anyway).
Now that everything is set up, your first step is to get the ".pit" file for your device. I'll check whether yours is valid. Open the Heimdall frontend as administrator and go into the last tab. Click on detect device and, if your device gets detected, click on print pit. If you get errors in the output, disconnect your phone, shut it down and enter download-mode again. Retry.
Please post the output here.
Sent from my GT-I9100 using XDA App
Dear Members help is needed!
The device was running 5.1.1 version and upgraded to 7.0 with FOTA.
Then the device start to stuck and restart until I got "SAMSUNG GALAXY S6 edge powered by android"
And stuck at this screen forever (NO BOOTLOOPS).
Things i tried:
1. Flash with ODIN same ROM version and downgrade versions (Didn't helped)
2. Smart Switch restore, it finished successfully but Didn't helped (Same screen)
3. TWRP ODIN and install custom ROM (Didn't helped)
4. no-verity-opt-encrypt-5.1 install (Didn't helped)
More Details:
1. Cannot turn off the device, just when i'm in TWRP and pressing POWER OFF
(WHEN USB CABLE IS CONNECTED TO DEVICE IT START AUTOMATICALLY!)
2. Device Manager recognize device as "SAMSUNG Mobile USB Modem" under Download Mode
3. TWRP is the only thing that working as recovery
(After installing Original ROM Recovery doesn't works)
4. When switching to ADB Sideload device manager recognize as SAMSUNG Android ADB interface.
5. When i'm in TWRP PC shows just Internal Storage.
Any other ideas to make this phone to work?
Hello,
I've Samsung Galaxy SM-J701F/DS and i did factory reset and started getting into panic mode. So, I tried to flash stock ROM through odin and I only selected AP and left other files like Bl, CP and CSC. Thus it took longer time without any result so, I closed the odin. Since then my phone only boots in download mode.
And while trying recovery or normal boot I get " Error Cannot Update Software ".
I used this ROM:
https://www.sammobile.com/firmwares/...-nxt/SM-J701F
And now my phone is showing as Samsung USB Modem while plugging in PC.
Hello androids, I have a big problem or a good challenge, depends on your optimism. I've been looking for and trying solutions for hours and hours, but I think I've come across a wall and I need your help:
Originally I wanted to root my s7 Edge / SM - G935F (OS Marshmallow 6.0.1) by following a tutorial using an autoroot ROM for this phone. I remember I had USB debugging and OEM unlock enabled. I also installed the USB / ADB drivers correctly.
I used Odin v3.11, since they recommended using it for this mobile and MM 6.0.1. According to Odin, the rom was installed successfully, but my phone entered a loop with the Samsung logo and "RECOVERY IS NOT SEANDROID ENFORCING". Something failed in the process and I decided to install a S7 Edge stock ROM in 8.0.0 from SAMMobile (this one) with Odin v3.13 using HOME_CSC so that I don't lose certain data
Unfortunately everything was going well until just at the end when "hidden.img" did not process correctly and resulted in FAIL. I've been since then stuck with this error:
"An Error has occurred while updating the device software. Use the Emergency Recovery in the Smart Switch PC Software."
It won't even turn off. From there I can only access the Download Mode and neither the Smart Switch or the ADB & Fastboot console won't detect the device. Odin does recognize the phone, but every time I try to install a rom, the log gets stuck in "SetupConnection ..".
I have tried a bunch of solutions such as removing the "hidden.img" from the package, reinstalling the drivers, changing the USB port, changing Odin's version, installing only the BL, etc., but nothing shows progress...
I'm sorry if during the process I managed to do some stupidity that I am not aware of. Other phones I have never had problems, but now I feel defeated and lost. I need a savior! :crying:
Any way to make Odin work, ADB detect my device or access a working bootload? Thanks in advance!
Hey all, hope everyone is having a great day (I'm not),
I own a SM-T510 Samsung Galaxy Tab A 10.1 WiFi.
It all started when I tried to flash Nexus and it worked partially, but I didn't gain access to my internal storage for some reason, so I reverted back to stock rom.
Then for some reason part of the nexus rom was still there, but I was afraid of damaging my device further.
For some reason, netflix wasn't working, so I tried to apply a software update to my device using Smart Switch.
The update didn't work and I was caught in a Nexus bootloop. I entered download mode and I tried flashing twrp using odin. I thought it worked until I realised that it wouldn't get past the teamwin screen.
I re-entered download mode and there it gave me an option to factory reset the device while locking the bootloader. This is where I screwed up as I thought what else could possibly happen to my device?
SO I locked my bootloader and whatever I did I couldn't get out of download mode. AND here I screwed up even more. I tried to flash the stock ROM again using odin as a last resort but it just wouldn't complete after 10 minutes, so I closed Odin and restarted my device and here I am, stuck in a screen that says, "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." Now obviously this wouldn't work because my device isn't even listed there. But to note, my device is recognised by Odin and my PC.
Note: I am an absolute noobie at rooting so be easy on me.
Note 2: adb and fastboot doesn't work for me for some reason, my powershell says, "The term 'fastboot' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again."
Thank you all for any help. I am at my wit's end.