Related
My phone was running at about 60% battery last night, and working fine. It was in my pocket and it vibrated. I was unable to turn it on or reboot it, even after removing the battery. I tried using the battery from my wife's S2 but still no luck. I tried connecting the power supply but it still wouldn't boot so I left it charging overnight.
This morning it alternately flashed a fully green battery and a fully black battery. If I press and hold the power button it starts the boot process - I get past the Samsung splash screen and see the first "Resurrection Remix" splash screen, but then it reverts to displaying the green battery.
Any ideas for how I can revive the phone??
itm said:
My phone was running at about 60% battery last night, and working fine. It was in my pocket and it vibrated. I was unable to turn it on or reboot it, even after removing the battery. I tried using the battery from my wife's S2 but still no luck. I tried connecting the power supply but it still wouldn't boot so I left it charging overnight.
This morning it alternately flashed a fully green battery and a fully black battery. If I press and hold the power button it starts the boot process - I get past the Samsung splash screen and see the first "Resurrection Remix" splash screen, but then it reverts to displaying the green battery.
Any ideas for how I can revive the phone??
Click to expand...
Click to collapse
Ok We cant say its bricked!! Because its booting up but not coming to homescreen rite? Are u able to get into recovery or download mode?? If ur able o then wipe the data cache and dalvik cache, reinstall the ROM again.. If Recovery doesnt shw up.. Then Use ODIN to flash original fw!! Even if u still couldn get it.. Order a USB JIG from Ebay and try getting into DOWNLOAD MODE!! Even after this its still working means ITS BRICKED !!
Start download mode and the flash a new stock firmware . And your phone isnt bricked .!
This is why I always make a backup.
If you can get into download mode you can fix it, if you can't it's a service centre job. Pretty simple really.
Try cleaning charging port..
Sent from my GT-I9100 using XDA
Uh oh...I managed to get into Recovery mode, did a factory reset and kicked off a re-install of the Resurrection Remix ROM from the external SD and it's hung at 50% (for 10 mins now) - at the "Extracting /system..." stage. I daren't interrupt it.
Any ideas???
Yes stop messing
1: If you dint have to save anything, wipe better to full wipe
Flash a stock Rom using Odin, than start again with custom roms.
OR
2: download your custom Rom again and flash, might be corrupt download.
atifsh said:
Yes stop messing
1: If you dint have to save anything, wipe better to full wipe
Flash a stock Rom using Odin, than start again with custom roms.
OR
2: download your custom Rom again and flash, might be corrupt download.
Click to expand...
Click to collapse
So it's OK to interrupt this ROM flash, even though it's stuck at 50%? Should I just hold the power button or remove the battery??
pull the battery
But I say flash stock Rom first, lengthy procedure I know, but safer
OK I decided to reflash RR 2.3, which had been running fine for a couple of weeks previously. Immediately after flashing (which worked OK) the boot process wouldn't complete - it got as far as the RR splash screen then died (screen blank, and needed a long press on the power button to restart).
This happened several times. Eventually I removed and replaced the battery and it finally booted.
Does this sound like a hardware problem? I've noticed that the phone often runs quite warm, but I don't know if that's normal.
You have to flash stock rom, only way to know if there is something wrong with your phone, run it for couple days.
Now to the heat issue, it is due to
1: modem
2: kernel
3: both
Hello. I'm new to the forum, and the issue that brought me here as had me fulling my hair out of the last three days.
I'll try my best to make this short as possible. I have (obviously) AT&T Lg Optimus G (E970) that was running 4.0.4. i rooted and unlocked it and flashed a cm 10.1 using TWRP. Yesterday tried to flash a zip for a transparent status bar mod. But the flash resulted in CM getting stuck on the splash screen. So i booted in TWRP recovery mode to restore from a recent backup. In the midst of wiping my rom and going to restore, i guess my phone died (which was weird because it had a substantial charge). Then it would no longer power on, and the only was i could get ANY response was by plugging it on the charger. All i get it the red indicator light. my phone will only turn on when plugged into the computer. from there the only two thing i can do is enter download mode and boot. and when i try to boot, i will get the lg logo for a moment and the the screen cuts out and goes back the the flashing red light.
so I trien the LGNPST method.
i downloaded the auto LGNPST and installed just fine. downloaded teenybin and lg stock bin. i've tried to flash both (put phone into download mode, select the dll and select the bin file). what happens is everything starts off fine, then when it gets to 67% the phone reboots, then goes back to the flashing red indicator light, and a message on LGNPST will pop up saying the phone has been disconnected, and to reconnect to continue. so i'll unplug the phone, plug it back in, and put it in download mode, and hit continue. LGNPST will say complete but the phone will still be just sitting in download mode. and if i unplug it, it's goes back to square one (red flashing indicator light)
EDIT: i was flashing the v11c stock bin. i just flashed the v20j bin and now we're boot looping while plugged in (lg logo for about 2 seconds, shut off, repeat) progress???
SO SO SORRY FOR THE LONG READ. Just trying to give as much info as possible hoping it helps.
My question is, is this a hard or a soft brick, and do i have any options left? after researching on here i'm hoping JTAG isn't my only option (I don't have the time or funds to go that route) and i saw someone mention taking it back to at&t, butIi don't think that would help me any since rooting the phone voids the warranty, correct?
I'd be eternally grateful for ANY advice. i'm at my wits end, and i've been google researching this for so long i'm starting not to even comprehend what i'm reading. PLEASE HELP!! And thank you so much in advance.
goplatinum said:
Hello. I'm new to the forum, and the issue that brought me here as had me fulling my hair out of the last three days.
I'll try my best to make this short as possible. I have (obviously) AT&T Lg Optimus G (E970) that was running 4.0.4. i rooted and unlocked it and flashed a cm 10.1 using TWRP. Yesterday tried to flash a zip for a transparent status bar mod. But the flash resulted in CM getting stuck on the splash screen. So i booted in TWRP recovery mode to restore from a recent backup. In the midst of wiping my rom and going to restore, i guess my phone died (which was weird because it had a substantial charge). Then it would no longer power on, and the only was i could get ANY response was by plugging it on the charger. All i get it the red indicator light. my phone will only turn on when plugged into the computer. from there the only two thing i can do is enter download mode and boot. and when i try to boot, i will get the lg logo for a moment and the the screen cuts out and goes back the the flashing red light.
so I trien the LGNPST method.
i downloaded the auto LGNPST and installed just fine. downloaded teenybin and lg stock bin. i've tried to flash both (put phone into download mode, select the dll and select the bin file). what happens is everything starts off fine, then when it gets to 67% the phone reboots, then goes back to the flashing red indicator light, and a message on LGNPST will pop up saying the phone has been disconnected, and to reconnect to continue. so i'll unplug the phone, plug it back in, and put it in download mode, and hit continue. LGNPST will say complete but the phone will still be just sitting in download mode. and if i unplug it, it's goes back to square one (red flashing indicator light)
EDIT: i was flashing the v11c stock bin. i just flashed the v20j bin and now we're boot looping while plugged in (lg logo for about 2 seconds, shut off, repeat) progress???
SO SO SORRY FOR THE LONG READ. Just trying to give as much info as possible hoping it helps.
My question is, is this a hard or a soft brick, and do i have any options left? after researching on here i'm hoping JTAG isn't my only option (I don't have the time or funds to go that route) and i saw someone mention taking it back to at&t, butIi don't think that would help me any since rooting the phone voids the warranty, correct?
I'd be eternally grateful for ANY advice. i'm at my wits end, and i've been google researching this for so long i'm starting not to even comprehend what i'm reading. PLEASE HELP!! And thank you so much in advance.
Click to expand...
Click to collapse
If it is hard bricked when connected to computer it will show up in device manager as QDUSB Device or something similar. You could try to do a factory reset with button combo, be sure phone is powered off then hold power and volume down until menu shows up.
You Can Also Try TeenyBin If Factory Reset Does Not Work
Regards,
acervenky,
XPT
thanks for the reply guys. it looks like my phone is showing up in the device manager under ports as "LGE AndroidNet USB Serial Port (COM3)" is that a good sign? i'm going to try flashing teenybin again.
goplatinum said:
thanks for the reply guys. it looks like my phone is showing up in the device manager under ports as "LGE AndroidNet USB Serial Port (COM3)" is that a good sign? i'm going to try flashing teenybin again.
Click to expand...
Click to collapse
Yes, you are not dead in the water. Proceed, young grasshopper.
Sent from my Optimus G using xda app-developers app
All the custom, unofficial 4.2.2 roms I found on XDA require that you be on the latest LG 4.1.2 OTA.
There are also links to stock rom and kernel so you don't have to mess with LGPT whatever. No need to do OTA etc, if you flash this.
http://forum.xda-developers.com/showthread.php?t=2219953
I also found TWRP to be far easier to install, which is installed by default I think with FreeGee. But you can find thread for the latest TWRP 2.6. TWRP makes flashing and wiping cache/dalvik super easy.
Ok, so i'm starting to think this is a battery issue as opposed to a hardware issue. i could still be wrong. I've flashed the stcok rom after stock rom. When i plug my phone into a computer usb port it LG logo boot loops (and this is the only way i can get to download mode), but when i plug it into the usb wall charger, i just get the red flashing light and no other response. when it's not plugged in i get nothing.It's still showing up as "LGE AndroidNet USB Serial Port" in my device manager and i can still get to dpownload mode just fine, so i know all isn't "according to what i've read and been told". So i'm running out of fixes. I did come accross a thread on here suggesting i unplug the battery and plug it back up. So i'll be getting the tools and praying that works.
I did also come across an interesting thread on another forum. They were saying how id you allowed your battery to drain all the way to true zero (which i think might be possible because my phone died in recovery mode), it wouldn't have enough juice to initiate and monitor the charging process. If this is the case, can the batter be brought back to life? a jump start or something (lol)? or will i have to just replace the battery?
THANK YOU SO MUCH FOR THE HELP SO FAR GUYS.
When you used lgnpst to go to 11c it boot looped because you tried to go backwards from cm. If you did a factory reset afterwards with button combo it should boot. Also can you get into recovery after flashing teenybin to do a reset and flash a ROM?
adfurgerson said:
When you used lgnpst to go to 11c it boot looped because you tried to go backwards from cm. If you did a factory reset afterwards with button combo it should boot. Also can you get into recovery after flashing teenybin to do a reset and flash a ROM?
Click to expand...
Click to collapse
i did a factory reset a few times, but it still never booted. and whenever i LGNPST, when it hits 67% the phone reboots and just starts bootlooping (if i flash a stock rom) if i LGNPST teenybin, at 67% the phone will shut off and the flashing red light will just come up. and after each a message will say phone was unplugged or lost connection. after both instances ill plug it back up and put it in download mode again to finish and it will complete, but the phone will just be sitting there in download mode. and if i reboot.... bootloop city.
i cam across this thread that seems to detail my issue perfectly. so i'm going to attempt a teenybin flash one more time to tryt to get recovery mode (havent been able to get it at all), and if that doesn't work i'm going to do a battery pull..
http://forum.xda-developers.com/showthread.php?t=2261803&highlight=battery
BATTERY UNPLUG WORK LIKE A CHARM. again, i followed the method [r.]GimP laid out here http://forum.xda-developers.com/showthread.php?p=43732147#post43732147
i was nervous because i've never opened my (or any other) phone before.
and thanks to the tot link provided by zymphad above, i'm now running jb 4.1.2
THANK YOU GUYS :highfive:
I found LG's camera lacking, but 4.2 has an update for that, plus the camera mod, much improved I think.
Running RootBox great now with 124mhz idle, GPU downclocked to 200 and CPU undervolted to 85, stable and cool. I don't 3d game on phones.
Glad you fixed it, I just hope someone makes a high capacity internal battery for us since taking it apart isn't that difficult.
Sent from my Optimus G using Tapatalk 4 Beta
Ok, so something seems to have gone very wrong with flashing my phone :S
I managed to get recovery working yesterday, and followed the steps in this thread, http://forum.xda-developers.com/xperia-z2/general/4-4-4-creating-rooted-update-package-t2933155 , to create a pre-rooted 5.0.2 image. I put it on the external SD card, booted into recovery and installed the flashable zip, then used flashtool to flash with the instructions (though I also cleared Appslog, Cache and Data to get a fresh install). This went fine and everything appeared to be ok. I then tried to get the Xposed Alpha installed, but after that whenever the phone was rebooting it just hung if trying to boot to Android. I tried re-flashing with Flashtool, but still got the same issue. Would boot fine the first time, but then any restart it would just hang and crash out. Tried clearing the cache from recovery, but no difference.
So today, I went into recovery, re-installed the flashable.zip, then powered off the phone and flashed using flashtool, just as I had yesterday. Now though, my phone wont boot. It shows the Sony logo, then a blank screen, then restarts. Even worse, it will no longer boot into recovery. I hold the volume down button when the LED shows, nothing. I try holding the volume down button all the way through several bootloops, nothing.
I've tried to re-flash using flashtool which goes through the process ok, I can hold the volume down button and connect the cable once its in the process of rebooting, and it goes through all the process fine. It then powers off as expected and I can just disconnect and power on the phone. But it's still stuck in the bootloop and I don't have TWRP recovery.
Is there anything I can do to get my Z2 working?
Update - Re ran flashtool, this time not excluding system, only Partition. It now gets a little further, going to "Powered by Android" and giving the purple wavy lines, but after a minute or so it just hangs and restarts again. And still no recovery sadly....
I think I've got it sorted...
Used Flashboot again to do a flash, excluding System and Partition. This time the phone does boot up normally. The downside being that my root was gone. Despite my flashing a pre-rooted image, it seemed to just put a stock image on. And my recovery is still mysteriously gone.
In the end, just to get things completely back to a stable/stock starting point for later on, I ran a repair from PC Companion. Seems I was in the none rooted position anyway so figured I'd get myself to a more certain position. At least this way I can wait for someone to come up with a root for 5.0.2 so I can root and get recovery back.
Hello, I have an HTC Amaze for over a year now. It was working fine, I rooted it CWM 5. and I installed Android revolution custom ROM. Until 2 weeks ago my battery was giving me some trouble, so i put away the phone for a bit, I bought a new battery then I notice the phone wasn't coming on. SO i charge for an entire day it still wasn't charging. I carried it to the shop. They said, that they don't know whats wrong with the phone.
I came home and decide am going to fix it my self i tried powering it into recovery mode, hard reset. screen is still blank, at lease that is what I thought. I look closely and then i notice the phone was in recovery mode but no lights were on in the screen. So normally I thought what anyone would of thought, the bulb in the screen or some kind of wiring went bad. The i tried wiping cache davlik install new new rom. Nothing worked. and this was defficult because I had to use a flash light to see on the screen. Lastly, i just click reboot and then the phone lights up perfectly and HTC logo comes up and then it blanks off again. So can anyone help? any advise
Sent from my HTC One using XDA Free mobile app
keronmat said:
Lastly, i just click reboot and then the phone lights up perfectly and HTC logo comes up and then it blanks off again. So can anyone help? any advise
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Find the way to install adb and communicate with the phone via adb and fastboot. If you can do that, you will be able to install anything necessary to get the phone working again.
First however, remove the battery, wait a few seconds, reinsert the battery and charge the phone overnight. Next day, try and start phone usual way--see what happens.
If NOTHING happens and you get a black screen, remove battery again for a few seconds, reinsert, and this time hold the power button in for AT LEAST 20 seconds.
See if that starts the phone.
If you get absolutely nothing again, find the "Unbricking Project" thread, but if you get any kind of screen, see if you can boot to recovery and restore anything. If you get a screen but can't do any kind of restore at all, find instructions for adb and fastboot I mentioned earlier, so you can install a new recovery and flash a new rom..
I did everything you said. Except I complete forget how to flash recovery and custom rom from my pc but when I type command in fastboot "adb devices" it was successful.
However, I charge the phone and I got into the recovery mode again and the wipe everything and then click backup and recovery. I rebooted the phone and it came on as if its a brand new HTC Amaze. I had the phone working i rejoice for a bit and then I realize I forget to put in my sim card. So i turn the phone off, put in the sim card. The same problem again. No led, no light in the screen, the phone atomatically boots into recovery mood.
One more thing. when booting into recovery mode. the phone doesn't go where I see the 3 android at the bottom and you see, fastboot, reset etc. It goes straight to cwm screen.
keronmat said:
One more thing. when booting into recovery mode. the phone doesn't go where I see the 3 android at the bottom and you see, fastboot, reset etc. It goes straight to cwm screen.
Click to expand...
Click to collapse
I think that is what you should see when you boot into recovery.
Do whatever you did before to get the phone lit up again, then change the display settings to maybe 3/4 brightness for instance. Reboot the phone normal reboot and see if it comes back with light.
If it does, maybe you are fixed enough to install the sim.
Do you possibly have a nandroid backup saved somewhere, you could put it back in the phone via recovery?
The phone is lit up again like you asked me to do. It was hard to see in recovery mode. But i used a flashlight to look on the screen of the AMAZE then i flash a new custom rom. After multiple tries I got it up. SO its up and the brightness is at its highest point. But I dont believe thats the problem. I just need to figure out how the light stays off when in recovery mood but comes on when booted normally. Its as though the recovery is broken. How do I fix it? if its broken
Hi:
I've read through several "bricked" threads and none of them had the symptom I have so I'm not sure.....
I was on IMNUT's Tweaked Remix (VRAMC3 0906 release) and it's been acting up so I thought I'd move up to a newer ROM (I had planned to go to lacoursiere18's 4.4.2 to start).
I first updated recovery from an old version of CWM to the last version of Philz.
I flashed IMNUT's unlocked VRAMC3 stock via Odin and it booted fine although I hadn't realized I needed to wipe it first so all my apps were there.
I then booted to recovery to see if Philz was still there and found it replaced by the stock recovery (I didn't realize that would happen but I suspected it might).
So, since I used the unlocked version I used stock recovery to flash Philz. The output went by very fast and all I really caught was something about a file check failed (3 lines in red about it) and then a bunch of lines and then the screen went blank.
Now the phone will not do anything - won't turn on, won't go to recovery, won't go to download mode.
I pulled the battery and no change. I was at 60% battery when I started so I connected the USB cable to charge it. The little battery symbol that comes up while charging when you tap the power button did not come up. I tried power on/recovery/download and still nothing.
Am I SOL?
it is sure sounding like it to me... I don't think i've ever had a phone not at least go into bootloader mode.. ( vol down, home and power)