RECOVERY FOR ACE 4 SM-G316HU
____CWM RECOVERY____
based on v.6.0.3.x
Installation 1 :
VIA TERMINAL EMULATOR (Just for rooted phone)
download file I've provided below.
move/save in extSdCard
open terminal emulator
Type
Code:
su (enter)
type
Code:
dd if =/recovery.img of =/storage/extSdCard/dev/block/platform/sprd-sdhci. 3/by-name/RECOVERY (enter)
wait until the process is complete, if it is. ..
type
Code:
reboot reovery (enter)
completed..
Installation 2 :
(Just for unrooted phone)
Download odin and extract
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until detected on odin
Add the recovery_vivalto5mve3g.tar.md5 file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Wait until the flashing process is complete
Link :
recovery for terminal emulator
recovery for odin
Source :- https://github.com/AndiNR/android_device_samsung_vivalto5mve3g
bug :
in recovery vol down not work ,, use home button for down
Let me know if you find it
Special thanks to : Allah SWT and Nabi Muhammad SAW
CREDITS :
cyanogenmod team
@CTXz for help
andii_nr
my mother phone for test
IF YOU WANNA RESHARE THIS RECOVERY, PLEASE FOLLOW THIS RULES :
DON'T USE SHORTENER LINK (i.e. adfly, adfoc, etc)
DONT REUPLOAD MY RECOVERY BEFORE ASKING PERMISSIONS
Do not forget to donate/hit thank If you like my work
reserved #1
May it work on a *316 ML?
Edit:
stuck on first logo...
zenug said:
May it work on a *316 ML?
Edit:
stuck on first logo...
Click to expand...
Click to collapse
I also had the same question, and I can't test it since the download button from Yandex Disk doesn't work.
Please re-upload the images somewhere else, e.g. in a NextCloud instance or Mega.nz
EDIT: This was in my GNU/Linux PC running Iceweasel (Firefox-based) and with some extensions like uBlock, NoScript (but enabled JS), Disconnect, and HTTPS everywhere
works on Galaxy Ace 4 Neo SM-G136ML
Related
ClockworkMod Recovery 5: you only need extract folder in your PC and run file run_me then your computer will auto run to CMD.Let wait it until sucess! Download here: https://hotfile.com/dl/236727058/345bb31/Recovery_5_for_a800s-AnDinh-CyanogenVietnam.zip.html
To update your ClockworkMod Recovery 6 then you need to extract folder to C drive in your PC (it's easy to work ). You need to do as this instruction:
Extract folder to C drive named is A800s then you open command line in your PC. Besides, you need to access to Fastboot Mode in A800S by hold 3 key Volume Up + Volume Down + Power together.This time, your A800S will appear Fastboot Mode. Return command line screen and enter: cd c:\A800S -> adb devices ->Fastboot flash recovery recovery6012.img
Download ClockworkMod Recovery 6 in here:
https://hotfile.com/dl/236727105/b0...a800s_6.0.1.2_AnDinh-CyanogenVietnam.zip.html
Wow! your clockworkmod recovery 6.0.1.2 installed! Good Luck!
Original: An Dinh
XDA-Developer User: CyanogenVietnam
Phone: +84-947799995
Mail: [email protected]
Skype: dinhphucan
MSN: dinhphucan
a800s
hellow brother
Hotfile.com not open in my country please send me a another site link.....
Hi
Any dev plz help.me
Am using mmx a35 bolt...how to.make it to boot in cwm.via hard.keys..it boots in stock even.after flashing cwm...quick.boot app helps to boot in cwm....plz explain about it
.i wanna know..whats wrong with.it
..its sc6820
Sent from my Micromax A35 using xda app-developers app
Credits : Prashanth Sadasivan
Credits : Prashanth Sadasivan
Credits : Prashanth Sadasivan
Here is it,guys! Clockwork Mod for Micromax A35.Only 1 Bug was found.Soon it will be rectified.
Device ; Micromax A35
Processor : Spectrum ***
Download Link for CWM recvery : Download it from here
Instuctions to Flash :
* Install the required packages like adb.
*Download Quickboot.apk and install it in your phone.
*Now Enable USB debugging in your phone by going to Settings->Development->USB Debugging (Skip this step if it is already enabled)
* Open Quickboot & click on Bootloader option.
*After sometime your phone will get stuck at the logo.
*Connect your phone to PC using USB cable.
*Now open the adb folder & inside that folder press & hold the Shift key + right click on blank space & choose Open Command Window Here.
*Now download the given img file,rename it to "recovery.img" and put it into the adb folder
*Now a black cmd window will open, there type fastboot devices
*This should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
*Now Type fastboot flash recovery recovery.img
*Within a sec the process will get over & it will install the CWM.
So Enjoy, you have successfully Install CWM Recovery.img on Micromax A35
Now you can check whether your CWM is working or not:-
Remove battery of your phone and reinsert.
Press Power and Volume Up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
Credits : Prashanth Sadasivan
No Dude It won't Redirect into Int CMW..
after installing the cmw..
ffabiomelo said:
credits : Prashanth sadasivan
credits : Prashanth sadasivan
credits : Prashanth sadasivan
here is it,guys! Clockwork mod for micromax a35.only 1 bug was found.soon it will be rectified.
Device ; micromax a35
processor : Spectrum ***
download link for cwm recvery : Download it from here
instuctions to flash :
* install the required packages like adb.
*download quickboot.apk and install it in your phone.
*now enable usb debugging in your phone by going to settings->development->usb debugging (skip this step if it is already enabled)
* open quickboot & click on bootloader option.
*after sometime your phone will get stuck at the logo.
*connect your phone to pc using usb cable.
*now open the adb folder & inside that folder press & hold the shift key + right click on blank space & choose open command window here.
*now download the given img file,rename it to "recovery.img" and put it into the adb folder
*now a black cmd window will open, there type fastboot devices
*this should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
*now type fastboot flash recovery recovery.img
*within a sec the process will get over & it will install the cwm.
So enjoy, you have successfully install cwm recovery.img on micromax a35
now you can check whether your cwm is working or not:-
remove battery of your phone and reinsert.
Press power and volume up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
Credits : Prashanth sadasivan
Click to expand...
Click to collapse
hahah
lollz
u dude dont know
i have fixed all bugs
and credits goes to me
akashujjainkar said:
hahah
lollz
u dude dont know
i have fixed all bugs
and credits goes to me
Click to expand...
Click to collapse
yah dude u made it
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
Samsung USB Drivers
Odin3 v3.07
KU1.9_SM-G318H_4.4.4.tar (recovery+cache)
Root include standalone KingoUser 1.9 apk.
Work on Android 4.4.4
Build: G318HXCU0AOE5
Kernel: 3.10.17-589709
Serial: KTU84P.G318HXCU0AOE8
hello,
can you post the steps in order to root the SM-G318H ?
thanks !
Hi, Where is the file?
I don't found...
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
hi i would like very much you could give me the KU1.9_SM-G318H_4.4.4.tar
because i seem unable to find it... =(
plz help the world!!!!! =)
thank you very much Mr. Madgik nop90
:good:
AutoROOT Galaxy Trend 2 Lite SM-G318H
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
thank's
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
I rooted my Trend 2 lite SM-G318H with Kingo root for Windows.
It took a long time, but succeeded fine.
Cheers.
Madgik nop90 said:
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
Click to expand...
Click to collapse
hi, do you think it will work for my Galaxy Ace 4 Neo G318H?
someone managed to do the root ? Samsung G318H trend lite 2?
the metode was described in post nr5 working on my sm g318h phone thank you
KU1.9_SM-G318H_4.4.4.tar
can someone send me this file ????? please so much
Don't really see the point as there are no roms out for this phone to install or am I missing something, can certain roms cooked for other Galaxy devices be installed?
I have a question
Madgik nop90 said:
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
Click to expand...
Click to collapse
You said: "Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA."
After doing the root, can I update my phone??????
If the answer of this question is no, can you post a link to another file that doesn't do that?
Can any one please help me root my samsung galaxy trend neo SM-G318H
BASEBAND VERSION SM-G318HXCU0AOG2
Root Samsung Galaxy Trend 2 lite - SM-G318H android version 4.4.4
ROOT for all Samsung SM-G318H android version 4.4.4 Phones.
WARNING: Warranty will definitely be void after rooting your phone !
You need an USB data cable, generally provided with phone pack.
Requirements before rooting process.
A - Enable usb debugging mode on your phone.
B - Check if trust from Unknown Sources is enabled on your phone.
C - Download Samsung USB Driver for Mobile Phones and install it.
D -When connecting your phone your PC must give some notification that you connected your phone.
Rooting
1 - Download Odin3 v3.10.6 latest version.
2 - Locate and Download SM-G318H_4.4.4cokbasit.org.tar (i can't submit a direct download link as Junior Member)
3 - Start (Run as Administrator) Odin3 v3.10.6.exe and click on the --> CP <-- button to select and load the downloaded tar file into Odin. Make No Mistake you must see the path of the downloaded tar file after the checked CP checkbox.
(Using an older version of Odin click on the --> PHONE <--button to select and load the downloaded tar file into Odin. Make a No Mistake you must see the path of the downloaded tar file after the checked PHONE checkbox)
4 -Boot your disconnected SM-G318H phone into Download Mode by pressing Volume down + home + Power together (long press until the boot screen appear). A warning message will flash, now press Volume Up key to proceed to Download Mode. Now connect your SM-G318H phone, in Odin you should see a highlighted COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. That means Odin has successfully detected your SM-G318H phone at a ID:COM Port if not the Case keep on trying, Or find a better tutorial about Odin flashing. Now quick proceed to installation Press Start.
5 - Once completed, you would see “PASS!” message in ID:COM.
6 - Your SM-G318H Phone should automatically reboot after completion And You have ROOT
Including SuperUser ase Root Access Manager for your SM-G318H phone.
download==> 4.4.4cokbasit.org.tar
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Tweak your Rooted SM-G318H to absolute top performance. I recommend the Ultimate Utility PowerToolbox a MustHave for android PowerUsers the All-In-One Toolbox containing a lot Powerful system utilities (google playstore). Warning don't apply risky changes that can seriously mash up (brick) your phone or resulting in a unstable frequently crashing system. Some changes can't be rolled back. So only apply risky changes with outstanding knowledge of the android system. Otherwise you have flash the (original) Stock firmware including the root tar for SM-G318H again and reinstall all your apps.
All-In-One Toolbox APK==> imoblife.toolbox.full-5.2.9.1.apk
Feedbacks and thanks are welcome
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help? ?
skullhack said:
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help?
Click to expand...
Click to collapse
Yes ROOT for every SM-G318H device! Unfortunately i still can't submit a direct download link for the SM-G318H_4.4.4cokbasit.org.tar File Essential for ROOT on SM-G318H devices. Follow the steps and you will have ROOT on your SM-G318H phone.
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Download from there.
Feedbacks and thanks are Welcome
Let me get the package. Will get back to you.
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
damulag1234 said:
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
Click to expand...
Click to collapse
Hi
Do Flash a New Rom of your Phone with Flashtools v 0.9.18.5
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Sajad Askari said:
Hi
Do Flash a New Rom of your Phone with Flashtools v 0.9.18.5
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Click to expand...
Click to collapse
my z2 is turned off and i cant open it to allow usb debugging sir,
what should I do? i think my z2 got brick
damulag1234 said:
my z2 is turned off and i cant open it to allow usb debugging sir,
what should I do? i think my z2 got brick
Click to expand...
Click to collapse
No problem
Just install Flashtools V 0.9.18.5
And install Your Drivers
And Do flash Your Rom
No need usb Debugging
Are You Can Flash Stock ROM?
sєňţ ғяom тнe ҡıňɢ ♔ Z2
Unless you've messed up the TA partition, our phones are pretty hard to brick. If you hold vol_up then plug in USB to your PC, it should boot into flash mode with a blue LED. That means you can use Flashtool to flash an FTF file to the phone, effectively factory program it.
Si_NZ said:
Unless you've messed up the TA partition, our phones are pretty hard to brick. If you hold vol_up then plug in USB to your PC, it should boot into flash mode with a blue LED. That means you can use Flashtool to flash an FTF file to the phone, effectively factory program it.
Click to expand...
Click to collapse
my z2 is turned off and i already flashed but i used a wrong firmware.
my z2 now is not opening or booting and it say The software update failed
what should i do?
damulag1234 said:
Good day
Permission to post
I was here to seek help on how to fix my sony xperia Z2
I was flashing my Z2 but accidentally I didn't notice that i click the wrong firmware
and my z2 is not booting. it said that failed to update the new system.
please help me I dont know what to do.
Click to expand...
Click to collapse
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://mega.nz/#!7942XJjI!9gurv7k3P...RTiDPeArhwjXsG XB9c
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/dow...41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img.html
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn...ew?usp=sharing
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Click to expand...
Click to collapse
i need the key to download can you provide it for me?
damulag1234 said:
i need the key to download can you provide it for me?
Click to expand...
Click to collapse
Ok, no problem but for which one?!
Mostafa Sherif said:
Ok, no problem but for which one?!
Click to expand...
Click to collapse
sir can you provide me all the needed files? the download links are not working. and the other needs key to be downloaded
damulag1234 said:
sir can you provide me all the needed files? the download links are not working. and the other needs key to be downloaded
Click to expand...
Click to collapse
Sorry for this problem,, but i have edited my post and provided you with a new alternative link (for Minimal ADB and Fastboot) see it again.
and i will check the other links now and if any another link is unavailable i will change it for you.
Mostafa Sherif said:
Ok, no problem but for which one?!
Click to expand...
Click to collapse
1. download link need key
2. download link is not working
3. downloaded
5.download link is not working
damulag1234 said:
1. download link need key
2. download link is not working
3. downloaded
5.download link is not working
Click to expand...
Click to collapse
Check now all the download links again,, it should works now normally
Tell me if there is any another thing
Sorry for that
Mostafa Sherif said:
Check now all the download links again,, it should works now normally
Tell me if there is any another thing
Sorry for that
Click to expand...
Click to collapse
how to use md5 file? do i just need to paste it?
damulag1234 said:
how to use md5 file? do i just need to paste it?
Click to expand...
Click to collapse
Where do you get these files?? i didn't tell you to use any md5 file. and there is no md5 file to use it and if you have found any md5 file just ignore it and continue doing these steps only.
Do the steps as i write it and your phone will boot again successfully
Mostafa Sherif said:
Where do you get these files?? i didn't tell you to use any md5 file. and there is no md5 file to use it and if you have found any md5 file just ignore it.
Do the steps as i write it and your phone will boot again successfully
Click to expand...
Click to collapse
the twrp file is an md5 file sir
damulag1234 said:
the twrp file is an md5 file sir
Click to expand...
Click to collapse
Download the twrp.img from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
After you download it you will see it's name is twrp-3.0.2-0-sirius.img
Then continue my steps normally and tell me if there is any problem
Mostafa Sherif said:
Hey, don't worry if you do these steps exactly then your phone will boot again normally and you can enter the recovery then flash any rom again and recover your phone from this brick
1- Download and install Minimal ADB and Fastboot from this link: https://www.androidfilehost.com/?fid=24521665358595410
2- Download and install Flashtool drivers from this link: http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4
Skip Step 2 if you already installed Flashtool Drivers that install with Flashtool if you have installed it.
3- Download the latest twrp recovery from this link: https://dl.twrp.me/sirius/twrp-3.0.2-0-sirius.img
4- Move the twrp recovery that you have downloaded in step 3 to this Path C:\Program Files\Minimal ADB and Fastboot
5- Download this kernel from this link: https://drive.google.com/file/d/0Bwn7bAJ-USZjZzg0Q2I2RWlWa1U/view?pref=2&pli=1
6- Extract it then you will find boot.img take this file and move it too to this Path C:\Program Files\Minimal ADB and Fastboot
7- put your phone in fastboot mode by this way >> (Power off your phone completely then wait for 10 second then press and hold the volume up then connect your phone to the computer with usb cable while you are pressing and holding the volume up then the led will change it's color to blue.. that is the fastboot mode)
8- Now go to the Minimal ADB and Fastboot folder in that path (C:\Program Files\Minimal ADB and Fastboot) Press shift button from keyboard then press right click form mouse while pressing the shift button you will find an option [Open command window here] Press it.
9- In the command window write this command exactly: fastboot flash recovery twrp-3.0.2-0-sirius.img
10- Then write this command after it: fastboot flash boot boot.img
11- After it flashed successfully reboot your phone by writing this command: fastboot reboot then unplug the usb from the phone
12- when the phone reboot and the sony logo appears keep pressing the volume up and down until the twrp recovery opens
13- Done
Through the recovery flash any custom or stock rom and your phone will boot normally
I wish that i had helped you if you want any thing just ask me and i will answer.
Click to expand...
Click to collapse
sir i cant understand the instruction on number 8 and 9
would you mind explaining it to me? thanks a lot
damulag1234 said:
sir i cant understand the instruction on number 8 and 9
would you mind explaining it to me? thanks a lot
Click to expand...
Click to collapse
No problem In step 8 first: Go to the path i told you in the description then press and hold shift button from keyboard and then press right click with mouse at any empty space in the folder,, a menu will pop up then you will find an option named (Open command window here) select it, then a command window will open.
I wish i had descriped it to you exactly and tell me if you successed to make it
If you do step 8 correctly then continue to step 9.. in step 9, you have to write the commands that i give it to you in the command window that have been opened in step 8.
The commands that i had bold it
Mostafa Sherif said:
No problem In step 8 first: Go to the path i told you in the description then press and hold shift button from keyboard and then press right click with mouse at any empty space in the folder,, a menu will pop up then you will find an option named (Open command window here) select it, then a command window will open.
I wish i had descriped it to you exactly and tell me if you successed to make it
If you do step 8 correctly then continue to step 9.. in step 9, you have to write the commands that i give it to you in the command window that have been opened in step 8.
The commands that i had bold it
Click to expand...
Click to collapse
i followed it what about the number 10? should i put it before i enter the command from number 9?
Hey Guy's let's help me how I can root my Samsung Galaxy A03s and how i can find the image of twrp in my phone.
Download Platform ADB & Fastboot.
Download The Latest Odin tool.
Download 7-Zip
Download "Bifrost" on your phone.
Download The Stock ROM of your SM-A037F using the Bifrost (make sure to know your device's Model & Region-Specific CSC).
Backup User Data (as your Phone will have to be reset... Multiple times)
... Now...
Step1: Decrypt the Stock ROM you downloaded with Bifrost in the Decrypt section of Bifrost.
Step2 : Move the firmware to your PC, keep two copies.
(p.s.: leave only the "AP" file on your phone.)
One copy will be the stock firmware backup incase of any mishaps.
The second copy of the firmware; Change the file extensions of all the extracted files to ".tar" with 7-Zip.
Step3 : On your phone, Using The latest Magisk APK, patch the entire "AP" file (should be about 5GB give it some time to work.). It will now be renamed by Magisk to something else.
Step4 : Move the patched "AP" to your PC. Then lauch Odin and input all the files in the following order;
BL. - Stock BL.
AP. - MAGISK-Patched AP.
CP. - Stock CP.
CSC. - Stock CSC. (DO NOT USE "HOME CSC").
Go to "Option" tab and Untick "Auto Reboot".
Step5 : Go to "Developer Settings" on your phone and enable OEM Unlocking.
Step6 : Plug-In your phone to your PC
Step7 : Power off;
Long-press: Volume Up + Volume Down Simultaneously.
Step8 : Wait till you see a prompt to disable Device Bootloader by Holding Volume Up; Proceed with holding on Volume Up to unlock the device Bootloader.
Step9 : It will Rest your device's, so quickly Setup your phone, turn on your data connection or WiFi.
Head to the "Developer Settings" to confirm the status of your bootloader.
Repeat Step6 & Step7.
Step10 : Tap once on Volume Up to enter Download Mode and Click Start On the Odin tool on your PC to flash the Rooted Firmware on your Galaxy A037F.
Step11 : Wait for it to finish its Download and then hold Volume down and power button.
Step12 : After Booting up, Power Off and Long Press Volume Up and Power Button to enter Recovery Mode.
Step13 : Perform a Factory Reset. And Reboot
Step14 : Install Latest Magisk APK and
Done!
I need help too
on a Galaxy a03s sm-a037u the system is as follows.
Android 11 / R / API 30
Baseband Version: A037USQS2AVD3
Linux Kernel Version: 4.19.127-23960189
Http User Agent: Dalvik/2.1.0 (Linux; U; Android 11; SM-A037U Build/RP1A.200720.012) hardware model MT6765V/CB
Needing to unlock bootloader, Enabled developer options and no oem unlock toggle,ran adb commands got,
( ro.oem_unlock_supported "1")
( sys.oem_unlock_ allowed "0")
( ro.boot.flash.locked "1")
( ro.boot.vbmeta.device_state "locked")
( ro.boot.verifiedbootstate "green")
( ro.boot.verifymode "enforcing")
Tried running Flashboot command
Flashboot unlock oem,returned error code remote unknown command. Dies anyone know who to unlock bootloader and root this device?
This is a33 forum device not a03s.
Zillion said:
This is a33 forum device not a03s.
Click to expand...
Click to collapse
Yea that's obvious was just hoping some one could help
Actually its the a03 thread. Read the title up top D!ck
Goosemidtn said:
Actually its the a03 thread. Read the title up top D!ck
Click to expand...
Click to collapse
Some moderator moved it to "Android Q&A, Help & Troubleshooting", try to be nice with people.