[ROM] CyanogenMod 13.0 Nightlies - Nexus 6 Android Development

Edit: I no longer own this phone. Information in the OP may be outdated and/or incorrect. Please go to the new thread at http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-nightlies-snapshots-t3363769
DISCLAIMER: I AM IN NO WAY RESPONSIBLE FOR ANY PROBLEMS ON YOUR DEVICES CAUSED BY FLASHING THESE BUILDS. THE UPSTREAM CODE AND BUILDING IS MAINTAINED BY THE CYANOGENMOD TEAM, NOT ME. I AM NOT ASSOCIATED WITH THEIR TEAM, I AM JUST THE THREAD OWNER.
It was a fun round of unofficial nightlies but the official upstream CM13 builder for shamu is active! Please use the new download links below to grab the official nightlies. Dirty flash seems to work fine if you go from my unofficial 11-29 build to the official 11-30 one. As mentioned in the first post, I will be ceasing my personal builds for now and leave it to the CM team.
Notes: CyanogenMod's stock kernel forces encryption of storage. Please download one of the third party kernels if you wish to avoid this. Also this thread assumes you have kept up to date with bootloaders and radio. At the time of writing, the latest is from the MRA58K release and can be downloaded here.
CyanogenMod 13.0 Nightlies: Download
Open GApps: Download (I recommend arm, 6.0, micro)
Changelog: CMX Changelog
Third party kernels:
Elite Kernel
Hells Core
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Nexus 6
Contributors
djh816
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-11-22
Last Updated 2015-12-06

There's already a thread
http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-0-android-6-0-t3231497

HipKat said:
There's already a thread
http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-0-android-6-0-t3231497
Click to expand...
Click to collapse
Correct, but not nightly and as far as I can tell albinoman887 is also making fixes which implies altering of upstream code. My thread intends to serve as a purely upstream source build.

djh816 said:
Correct, but not nightly and as far as I can tell albinoman887 is also making fixes which implies altering of upstream code. My thread intends to serve as a purely upstream source build.
Click to expand...
Click to collapse
I would like to say thank you, and I believe that this ROM deserves its own thread respectfully. Since there isn't much action from that other Alpha build and if you are truly building on a nightly basis then this is much appreciated and I look forward to testing.
Thanks!

HipKat said:
There's already a thread
http://forum.xda-developers.com/nexus-6/development/rom-cyanogenmod-13-0-android-6-0-t3231497
Click to expand...
Click to collapse
A Thread with Zero Support from the Thread OP and no Nightlys , its good to see this Thread with hopfully regular updates since I currently have working in the border guarding Work and never have time for building. But what i know from @djh816 updates come many times.

Tylog said:
A Thread with Zero Support from the Thread OP and no Nightlys , its good to see this Thread with hopfully regular updates since I currently have bodybuilding in the border guarding Work and never have time for building. But what i know from @djh816 updates come many times.
Click to expand...
Click to collapse
Thanks for the support and glad to build it. Just to make sure credit is given where due, any bug fixes will be made only by the CyanogenMod team and/or any git contributors. Not sure if you'll get much support from me either but I'll certainly be glad to give any tips I find. For example, if this one specific bug rears its ugly head again, you may need to rename the SetupWizard apk inside /system/app-priv/ as that has been constantly force closing for me prior to today's build.

djh816 said:
Thanks for the support and glad to build it. Just to make sure credit is given where due, any bug fixes will be made only by the CyanogenMod team and/or any git contributors. Not sure if you'll get much support from me either but I'll certainly be glad to give any tips I find. For example, if this one specific bug rears its ugly head again, you may need to rename the SetupWizard apk inside /system/app-priv/ as that has been constantly force closing for me prior to today's build.
Click to expand...
Click to collapse
MAybe test other Gapps, i had this isues with a few cm 13 builds in combination with banks gapps , i like Banks gapps but for now not with CM13 . No support for me no problem , only 1 builds in 3 Weeks in this early stage is a problem , thats what i mean . I have at the moment zero time , i am one day in the week at home and thats time for my son and my wife

Thanks for the builds. I tried (unsuccessfully) to build my own, so this helps out a lot!

nightlies has not started yet.. looking forward..

Awesome! Thanks!
Sent from my Nexus 6 using Tapatalk

Can anyone confirm that you can write to system on this build???? Wasn't working on a build from 11.20.
Sent from my Nexus 6 using Tapatalk

mexiken said:
Can anyone confirm that you can write to system on this build???? Wasn't working on a build from 11.20.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Still is not working.. I'd love to know of a fix, if any...

mexiken said:
Can anyone confirm that you can write to system on this build???? Wasn't working on a build from 11.20.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I modified build.prop just fine.
---------- Post added at 03:10 AM ---------- Previous post was at 03:08 AM ----------
Thanks OP, for bringing this to us. Seems pretty good for such an early build. I just barely flashed it but seems great so far.

Does ad away work on this build? It wouldn't work on the previous build.

Is security disable on the ROM?

cz829x18 said:
Does ad away work on this build? It wouldn't work on the previous build.
Click to expand...
Click to collapse
Doesn't seem to just yet. As others have mentioned, no /system writing just yet.
evolishesh said:
Is security disable on the ROM?
Click to expand...
Click to collapse
Doesn't seem like it, I've tried "adb shell" with "su" after but still drops me to a "$" shell rather than "#"

Will you be adding any features or will this be more of a slim to stock cm13 builds? Also thanks for your contributions

nighthawk626 said:
Will you be adding any features or will this be more of a slim to stock cm13 builds? Also thanks for your contributions
Click to expand...
Click to collapse
No features added whatsoever If they add it upstream (included in CM) it'll be here, otherwise no. Absolutely stock. Consider me a third party buildbot slave

Very nice ROM. Just to let everyone know I just finished flashing with the Open GApps Pico and it's working fine. I know, it's bad form to use something that's not recommended.
One quick question, do we get any notification that the new nightly is ready to flash or do we just check the download site?

dlbarron said:
Very nice ROM. Just to let everyone know I just finished flashing with the Open GApps Pico and it's working fine. I know, it's bad form to use something that's not recommended.
One quick question, do we get any notification that the new nightly is ready to flash or do we just check the download site?
Click to expand...
Click to collapse
For now just the download site. I may setup something similar to the pushbullet feed Chroma has if people are interested but haven't spent the time to do it yet. New 11-23 build is up now though
Edit: Woot, looks like they fixed the system rw mounting. Hm but my test file disappeared on reboot.. maybe not yet

Related

[rom] [ktu84m] [4.4.3] aosp 2014.06.11

No fancy bells or whistles here. Just pure AOSP except for binaries added and also modified to prevent installation of stock recovery overwriting your current recovery. Rotation,Wifi, 3G/LTE, GSM, phone calls, everything works great. Let me know if you come across any issues. I will update this every few days. Build times aren't too bad, it only took me around 2 hours so I can't really complain.
Link: Build date June 11th 2014
http://www.mediafire.com/download/9ro6r4ojr8297bc/aosp_hammerhead-2014.06.11.zip
SuperSU:
http://download.chainfire.eu/supersu
GAPPS:
BaNkS GAPPS - http://forum.xda-developers.com/google-nexus-5/themes-apps/gapps-t2012857
PA GAPPS - http://forum.xda-developers.com/showthread.php?t=2397942
Changes to the AOSP tree can be found here:
https://android-review.googlesource.com/#/q/status:merged,n,z
Have fun!
:good:
Thanks:
@the.emilio, @Pizza_Dox, @jorgen2009, @Gnome, CM, Omni, PA, Slim
DUDE! Perfect, sweet, im set, this is 100% what i want! Im gonna use this build from now on, , thanks!
Glad you got it going!!
Sent from my AOSP on HammerHead using Tapatalk
Thank you very much for this!. Will further updates be delta?
Runs smoothly.
Yes, it takes forever for GPS to lock on. A fix for this would make this ROM a daily driver.
Sent from my Nexus 5 dude
There is nothing like full aosp with art and GPU rendering enabled as well as elemental kernel!
Sent from my Nexus 5 using Tapatalk
@madquack GPS fix: https://github.com/TheGNOMEProject/...mmit/28e4371a3ddc396238de0f9035c3ebde54df1862
As I said on @the.emilio's thread there's alot of useful stuff on my git that you guys can use, since its almost stock AOSP, all those stuff I already encountered before and I've fixed it. Just check it out if you have any issues.
Cheers.
So this means new build?
Location using WiFI/Mobile Networks is working perfectly now! New build uploaded! Thanks @Gnome, guess I'll be reading up on your Github a lot now!
madquack said:
Location using WiFI/Mobile Networks is working perfectly now! New build uploaded! Thanks @Gnome, guess I'll be reading up on your Github a lot now!
Click to expand...
Click to collapse
Nice to here you got it working... Anyways, is restore working on this ROM?
Sent from my Nexus 5 using Tapatalk
Thank you!! This ROM is perfect and bone stock vanilla, just like I was looking for.
Gnome said:
@madquack GPS fix: https://github.com/TheGNOMEProject/...mmit/28e4371a3ddc396238de0f9035c3ebde54df1862
As I said on @the.emilio's thread there's alot of useful stuff on my git that you guys can use, since its almost stock AOSP, all those stuff I already encountered before and I've fixed it. Just check it out if you have any issues.
Cheers.
Click to expand...
Click to collapse
Is there a zip for the fix... I'm not sure how to execute that?
Sent from my Nexus 5 dude
rahsaanabdul said:
Is there a zip for the fix... I'm not sure how to execute that?
Sent from my Nexus 5 dude
Click to expand...
Click to collapse
The fix is in the code. The new build has it included.
madquack said:
No fancy bells or whistles here. Just pure AOSP untouched except for binaries added and also modified to prevent installation of stock recovery overwriting your current recovery. Rotation,Wifi, 3G/LTE, GSM, phone calls, everything works great. Let me know if you come across any issues. I will update this every few days. Build times aren't too bad, it only took me around 2 hours so I can't really complain. I intend to keep this completely stock.
Link: Build date June 10th 2014
https://www.mediafire.com/?tbai4m1sfec9l11
SuperSU:
http://download.chainfire.eu/supersu
GAPPS:
BaNkS GAPPS - http://forum.xda-developers.com/google-nexus-5/themes-apps/gapps-t2012857
PA GAPPS - http://forum.xda-developers.com/showthread.php?t=2397942
Changes to the AOSP tree can be found here:
https://android-review.googlesource.com/#/q/status:merged,n,z
Have fun!
:good:
Thanks:
@the.emilio, @Pizza_Dox, @jorgen2009, @Gnome
Click to expand...
Click to collapse
Is there a reason why i can't update prl/profile am I missing something?
hacksome said:
The fix is in the code. The new build has it included.
Click to expand...
Click to collapse
Thanks a mill!
Sent from my Nexus 5 dude
New build in OP, added these commits for functionality nothing crazy, please let me know what works or what doesn't work.
Thanks again to @Gnome and @the.emilio
Backup/Restore:
https://github.com/TheGNOMEProject/...mmit/90ad44a3d2928b167399f4cd17c8482d23b9cf02
Change recents holo blue to white:
https://github.com/TheGNOMEProject/...mmit/628ceb1afa35ddd109b460b104a490d9406e2ff2
Update GPS for AOSP:
https://github.com/TheGNOMEProject/...mmit/28e4371a3ddc396238de0f9035c3ebde54df1862
Fix FC when trying to adjust radio band via *#*#4636#*#* dialer code:
https://github.com/SlimRoms/package...54cc95f#diff-c63e5076abde89dc91a7243dc0143b4c
I don't have sprint so it's kind of hard for me to test so if any of y'all Sprint guys could kindly report back and let me know what works, that'd be sweet!
No issues. Install went smooth, and all seems working with the 6-10 build.
I'm not really seeing any major difference between 4.4.2 and 4.4.3; I'm guessing most of it is "under the hood" (security and bugs).
Launcher3 gave me some initial fits, but it did under 4.4.2 as well. It works OK, but Google certainly isn't prioritizing it. Is Trebuchet any better?
Thank you for all of your hard work on this. And please keep it pure AOSP, with only bug and security fixes!
Yo quack, any chance you could post the md5's with your builds. I have a weird thing about not wanting to flash anything without checking first.
Anyway thanks for this. I'm one of those sprint guys, I'm gonna be flashing and getting back to you on that.
madquack said:
New build in OP, added these commits for functionality nothing crazy, please let me know what works or what doesn't work.
Thanks again to @Gnome and @the.emilio
Backup/Restore:
https://github.com/TheGNOMEProject/...mmit/90ad44a3d2928b167399f4cd17c8482d23b9cf02
Change recents holo blue to white:
https://github.com/TheGNOMEProject/...mmit/628ceb1afa35ddd109b460b104a490d9406e2ff2
Update GPS for AOSP:
https://github.com/TheGNOMEProject/...mmit/28e4371a3ddc396238de0f9035c3ebde54df1862
Fix FC when trying to adjust radio band via *#*#4636#*#* dialer code:
https://github.com/SlimRoms/package...54cc95f#diff-c63e5076abde89dc91a7243dc0143b4c
I don't have sprint so it's kind of hard for me to test so if any of y'all Sprint guys could kindly report back and let me know what works, that'd be sweet!
Click to expand...
Click to collapse
Damn, and I just installed
Flashed. I'm on sprint and no go with data. After flashing the sprint.zip that I've used with most stock aosp builds, all is well.

[6.0.1 marshmallow][UNOFFICAL] CyanogenMod 13.0 for SM-G860P

As always, you are responsible for your device. Use common sense and make backups
I am just a compiler not a developer but i try to find fixes when I can. That doesnt mean everything will get fixed.
In case anybody wants a pure cm13.0 for the kltesprsports, here it is. Was built from cm13.0 sources, 6.0.1
***Thanks***
CyanogenMod Team
@miked63017 be sure to hit this guys thanks button
Any and all testers of my work!
* Do NOT expect daily builds. I'll build when I'm free.
* Do NOT use this unofficial build and ask for support at the official threads.
* Do NOT be rude.
* Respect all users
Installation
flash(odin) unoffical twrp from here = https://androidfilehost.com/user/?w=settings-dev-files&flid=52449
wipe everything except sd card
install cm13.0 from here = https://www.androidfilehost.com/?w=files&flid=52450 new builds will be here when updated!!!!!!!
install gapps from here = http://opengapps.org/?api=6.0&variant=nano reccomend the aroma
XDA:DevDB Information
[6.0.1 marshmallow][UNOFFICAL] CyanogenMod 13.0 for SM-G860P, ROM for the Sprint Samsung Galaxy S 5 sport
Contributors
1991mustang50, miked63017
Source Code: https://github.com/1991mustang50/android_device_samsung_kltesprsports
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: working with issues
Know issues:
Nfc not working
Camera must turn on HDR in camera settings
And you tell me up in bug reports
Created 2016-03-21
Last Updated 2016-03-20
Reserved
Reserved
Works! Thanks for the hard work!
Sent from my SM-G860P using Tapatalk
1991mustang50 said:
As always, you are responsible for your device. Use common sense and make backups
In case anybody wants a pure cm13.0 for the kltesprsports, here it is. Was built from cm13.0 sources, 6.0.1
***Thanks***
CyanogenMod Team @miked63017 be sure to hit this guys thanks button
Any and all testers of my work!
* Do NOT expect daily builds. I'll build when I'm free.
* Do NOT use this unofficial build and ask for support at the official threads.
* Do NOT be rude.
* Respect all users
Installation
flash(odin) unoffical twrp from here = https://androidfilehost.com/user/?w=settings-dev-files&flid=52449
wipe everything except sd card
install cm13.0 from here = https://www.androidfilehost.com/?w=files&flid=52450
install gapps from here = http://opengapps.org/?api=6.0&variant=nano reccomend the aroma
XDA:DevDB Information
[6.0.1 marshmallow][UNOFFICAL] CyanogenMod 13.0 for SM-G860P, ROM for the Sprint Samsung Galaxy S 5
Contributors
1991mustang50, miked63017
Source Code: https://github.com/1991mustang50/android_device_samsung_kltesprsports
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-03-21
Last Updated 2016-03-20
Click to expand...
Click to collapse
Thank you so much for the hard work and answering my previous questions. I'll definitely be flashing this and reporting back tomorrow. Question: if I'm on the latest cm12 build currently, can i just flash the new TWRP through Odin over the CWM recovery for the Sport? Or is it required to flash back to the stock firmware?
g4_e said:
Thank you so much for the hard work and answering my previous questions. I'll definitely be flashing this and reporting back tomorrow. Question: if I'm on the latest cm12 build currently, can i just flash the new TWRP through Odin over the CWM recovery for the Sport? Or is it required to flash back to the stock firmware?
Click to expand...
Click to collapse
Just flash twrp through odin
1991mustang50 said:
Just flash twrp through odin
Click to expand...
Click to collapse
OK. Thank you very much for the quick replies. I'll flash tomorrow when I get back from school. :thumbup:
Been working great all day. Haven't hit any bugs and doze is really helping battery life! Thanks again @1991mustang50 for this and TWRP. Will say that TWRP is slow to take a stock backup (not as slow as the CWM we had prior), but it may be because TouchWiz is so heavy. Either way, thanks again. I know the guys that still use this phone daily really appreciate it and so do us that just use it as a toy now!
Good job @1991mustang50, it's a shame I had already given up on the phone and sold it
victor1g said:
Good job @1991mustang50, it's a shame I had already given up on the phone and sold it
Click to expand...
Click to collapse
How much did you get for it, if you don't mind me asking?
New build up same link in op just pulled cm changes!
1991mustang50 said:
New build up same link in op just pulled cm changes!
Click to expand...
Click to collapse
Any chance on making a build for the regular boost mobile one? The one on Mike's is giving me too many issues when it comes to bootloops
atcq28 said:
Any chance on making a build for the regular boost mobile one? The one on Mike's is giving me too many issues when it comes to bootloops
Click to expand...
Click to collapse
I started a build before i left for work if no problems i have new build up for kltespr!
Chief_Nodnarb said:
How much did you get for it, if you don't mind me asking?
Click to expand...
Click to collapse
I sold it for $100 to a cousin. It was in a rough condition around the edges and had call quality issues
Having issues getting data or cell service - I can see sprint under network operators, but haven't been able to get the phone connected. Is anyone else having the same issue and/or found a workaround?
I've flashed TWRP and the ROM and I have to say that so far there have been very few issues. TWRP makes backups very quickly compared to the previous CWM. The ROM has calls, data, SMS, and MMS working perfectly. One minor issue is that if you go into settings and click on carrier settings it will not recognize the SIM card and it will continuously crash the phone application until you reboot. It's a minor issue with an easy fix so dont worry too much about it. I tested Bluetooth which isn't in very good shape. Listening to music from my phone on a wireless headset was constantly cutting out. However I understand it's a beta build and Bluetooth shouldn't be a very big problem for me as I can just use the headphone jack. This next problem I don't think is specifically tied to the ROM however I would like if anyone can give me any ideas for. Basically write access on the external SD is not working as usual but all of the previous fixes you could use aren't working anymore. Any ideas or fix for marshmallow? Overall, the ROM is in great condition for such a new release. Doze works beautifully and battery life is even better than the previous CM12.1 build. I'll be using the ROM more to see if I can tell you about any other issues I may encounter. Thanks so much for the great ROM and TWRP. I'll be looking forward to future builds.
bigfatdude said:
Having issues getting data or cell service - I can see sprint under network operators, but haven't been able to get the phone connected. Is anyone else having the same issue and/or found a workaround?
Click to expand...
Click to collapse
I am not sure why you have this problem others seem ok. If you go back to cm12.1 do u get it back?
atcq28 said:
Any chance on making a build for the regular boost mobile one? The one on Mike's is giving me too many issues when it comes to bootloops
Click to expand...
Click to collapse
Havent forgot i did set up repo for kltespr to build twrp like i am doing forkltesprsports
1991mustang50 said:
Havent forgot i did set up repo for kltespr to build twrp like i am doing forkltesprsports
Click to expand...
Click to collapse
Sweet! Can't wait to try it out
1991mustang50 said:
Havent forgot i did set up repo for kltespr to build twrp like i am doing forkltesprsports
Click to expand...
Click to collapse
That was post to say i didnt setup the repo for kltespr to build twrp which my build enviroment is set up to. So running new build for kltespr now. Should be posted in the morning

[ROM] LineageOS 15.1 unofficial

Hi guys,
as LineageOS 15.1 is just around the corner and I had a few spare CPU cycles, here's the current build which I did as a 'code of honor'-member. Just flash with TWRP as usual, add gapps (stock are too big) and optionally root.
Watch out as the whole rom might still lack a few features.
Sources are on https://github.com/LineageOS
Credits to anyone who worked on them including intel for their buggy CPUs enabling me to build.
Build date: 2018-03-02
Download: https://go.stargazer.at/bacon
FAQs.:
Q: What patches did you include?
A: None. Pure LineageOS as it would come from the build server
Q: So this IS the official LineageOS rom?
A: In theory it's the same thing, but I am NOT a linageos developer
Q: What Gapps package did you use?
A: Nano. Stock is too big as it wouldn't fit on /system
Q: Support?
A: None officially. But ask - maybe someone has an idea.
Q: What works?
A: Phone rings, I'm able to answer and do calls, BT works, Wifi... annoying texts already arriving. I assume it's working.
Q: Bugs?
A: You tell.
Q: Is it complete?
A: I doubt it. Some translations are still missing. Keep in mind it's an early version of lineageOS
Q: Why did you build it?
A: Because I did not want to wait for the official release and live on the edge.
Q: Why does a girl build roms?
A: Short answer: because I can.
is the camera working? apparently that is the reason why the official build have been delayed
borzowsky said:
is the camera working? apparently that is the reason why the official build have been delayed
Click to expand...
Click to collapse
Honestly, I did not check yet as camera is not one of my basic needs. Will do so as soon as I get home.
If it does not work yet, I do not intend to fix too much stuff as I want to stay on the official sources. If there's a patch to cherrypick from gerrit, it's something we may talk about.
Camera does not work yet, but as far as I can see there are a few things in review to be submitted. Stay tuned as I will be building the rom again as soon as those changes are merged. In the meanwhile I may do some tinkering on my local build.
References:
https://review.lineageos.org/c/206914/
Long live bacon
cb5264 said:
Camera does not work yet...
Click to expand...
Click to collapse
I noticed that your build has SELinux enforcing but this may be why the camera isn't working; something that still needs fixing.
cb5264 said:
Camera does not work yet, but as far as I can see there are a few things in review to be submitted. Stay tuned as I will be building the rom again as soon as those changes are merged. In the meanwhile I may do some tinkering on my local build.
References:
https://review.lineageos.org/c/206914/
Click to expand...
Click to collapse
I've been keeping tabs on this every day and no one has touched it for weeks [emoji24] hopefully they just have code they're working on offline and just have to upload it and merge. Waiting is killing me though. Good to know it's getting close but probably will still wait since I'll probably do a full wipe once it's ready and don't want to do it twice.
Sent from my Nexus 7 using Tapatalk
remedya said:
I noticed that your build has SELinux enforcing but this may be why the camera isn't working; something that still needs fixing.
Click to expand...
Click to collapse
I doubt that it's SELinux. Looking at the logcat the problem root seems to be the HAL and that we should use the CAF stack. Besides that some clocks seem to be out of sync (mainly front camera). If it would be SELinux, logcat/dmesg would show.
Download doesnt work
I will fix it as I compile the next version.
cb5264 said:
Camera does not work yet, but as far as I can see there are a few things in review to be submitted. Stay tuned as I will be building the rom again as soon as those changes are merged. In the meanwhile I may do some tinkering on my local build.
References:
https://review.lineageos.org/c/206914/
Click to expand...
Click to collapse
Some changes on 19 March.
Download link fixed btw
remedya said:
Some changes on 19 March.
Click to expand...
Click to collapse
Are these the changes needed to fulfill the LineageOS Device Support Requirement/camera recorder?
cb5264 said:
Download link fixed btw
Click to expand...
Click to collapse
Error 7
---------- Post added at 08:37 PM ---------- Previous post was at 08:19 PM ----------
Lol and now the download link is gone. Just stop. Wait for the official there is clearly a reason why its not been officially released yet.
First look at Build 2003 is really fine. Thanks for your hard work, Lady
Cam seems "two steps from hell" ...
https://review.lineageos.org/#/q/project:LineageOS/android_device_oneplus_bacon
interesting enough ?
The_Voice_70 said:
First look at Build 2003 is really fine. Thanks for your hard work, Lady
Cam seems "two steps from hell" ...
https://review.lineageos.org/#/q/project:LineageOS/android_device_oneplus_bacon
interesting enough ?
Click to expand...
Click to collapse
You had no problems flashing?
It's happening!
Sent from my A0001 using Tapatalk
TbagBaggins said:
You had no problems flashing?
Click to expand...
Click to collapse
Nope. No Problems.
The_Voice_70 said:
Nope. No Problems.
Click to expand...
Click to collapse
Im getting error 7. No other rom gives me error 7. Download link works on and off have tried installing twice same error.
Use latest official TWRP 3.2.1.0. No Problems with it. Error 7 seams to be old Recovery.

ROM Lineage 15.1 Unofficial Oreo

ROM Lineage 15.1 unofficial. Built with latest GCC+ compiler.
All credits go to Lineage team.
Download Link
https://www.androidfilehost.com/?fid=818070582850505463
XDA:DevDB Information
Lineage 15.1 Unofficial, ROM for the Nexus 6
Contributors
Rondeau79
Source Code: https://github.com/LineageOS/android
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked bootloader ,latest TWRP
Version Information
Status: Stable
Created 2018-04-03
Last Updated 2018-04-03
Or you just use the official version here:
https://download.lineageos.org/shamu
does it force encrypt the phone?
mahir555 said:
does it force encrypt the phone?
Click to expand...
Click to collapse
Yes (as every official version), but you can flash the FED-Patcher to disable it. Just flash it right after LOS.
Maybe Magisk will do the trick too.
Render issue upon booting
After the booting finishes and lock screen appears, there is a pop-up saying vendor image not up to date..i understood that it wants me to install the last available factory image from google site but I was not able to successfully do it..help please!
aradhya10 said:
After the booting finishes and lock screen appears, there is a pop-up saying vendor image not up to date..i understood that it wants me to install the last available factory image from google site but I was not able to successfully do it..help please!
Click to expand...
Click to collapse
It's just a pop up. Shamu does not have a vendor image.
Go forward, it will work
gothy.gothy said:
It's just a pop up. Shamu does not have a vendor image.
Go forward, it will work
Click to expand...
Click to collapse
Except there is exclamation point notification in upper L hand corner which says "You might be a victim of software counterfeiting" and no way to cancel it.
HueyT said:
Except there is exclamation point notification in upper L hand corner which says "You might be a victim of software counterfeiting" and no way to cancel it.
Click to expand...
Click to collapse
In terminal adb/ recovery or app shell terminal:
Setprop persist.lineage.nofool true
That will fix that annoying notification.
toto-w said:
Or you just use the official version here:
https://download.lineageos.org/shamu
Click to expand...
Click to collapse
April fool's joke is terrible.
TheGreatess1223 said:
April fool's joke is terrible.
Click to expand...
Click to collapse
The official build is dated April 2nd, did the Lineage team REALLY still make an April fool's day build? Lol
H4X0R46 said:
The official build is dated April 2nd, did the Lineage team REALLY still make an April fool's day build? Lol
Click to expand...
Click to collapse
yes. yes they did. the dirty rat bastards
H4X0R46 said:
The official build is dated April 2nd, did the Lineage team REALLY still make an April fool's day build? Lol
Click to expand...
Click to collapse
Yes and have not released a updated yet. Lol
There is the 4/12/18 15.1 version available.
Sent from my Nexus 6 using Tapatalk
@Rondeau79
Now that we have official builds I think this thread doesn't make much sense anymore.
Can you please delete it?
@Rondeau79
Unfortunately, you currently seem to be the Rodney Dangerfield of XDA for Shamu. For those unfamiliar, Rodney Dangerfield is a comedian who is known for the catchphrase, "I get no respect." First with DU and now with LOS, you are asked to discontinue your threads and builds.
Just for the record, I'm not criticizing you, or DU and LOS! I understand the situation and reasoning behind why these requests were made.
I've used some of your builds on both my Hammerhead and Shamu. I have a great appreciation for those who build roms for those who cannot. So, I thank you for both your effort and sharing your work. Most recently, I used your Omni Nougat build and it was solid. From what I've read on Omni's G+, they are never going to make Shamu official for Oreo. So, maybe Omni would be a good rom for you to build unofficially.
Omni has always been a pretty innovative rom, I think there would be decent interest here in the Shamu community. Anyway, just a thought.
Thanks,
Mike T
webdroidmt said:
@Rondeau79
Unfortunately, you currently seem to be the Rodney Dangerfield of XDA for Shamu. For those unfamiliar, Rodney Dangerfield is a comedian who is known for the catchphrase, "I get no respect." First with DU and now with LOS, you are asked to discontinue your threads and builds.
Just for the record, I'm not criticizing you, or DU and LOS! I understand the situation and reasoning behind why these requests were made.
I've used some of your builds on both my Hammerhead and Shamu. I have a great appreciation for those who build roms for those who cannot. So, I thank you for both your effort and sharing your work. Most recently, I used your Omni Nougat build and it was solid. From what I've read on Omni's G+, they are never going to make Shamu official for Oreo. So, maybe Omni would be a good rom for you to build unofficially.
Omni has always been a pretty innovative rom, I think there would be decent interest here in the Shamu community. Anyway, just a thought.
Thanks,
Mike T
Click to expand...
Click to collapse
I know who Rodney Dangerfield is/was. I can build ROM's fairly well, it took 2 years for me on and off to get CM built. I first started rooting and flashing with a low end Metro PCS phone and I finally got my hands on Hammerhead. I have flashed hundreds of different ROM's and kernels over the years. Back in the days at another forum I used to see official and unofficial builds all the time. If people have an issue with my builds then why is everything so called open source. I guess the old school grassroots base of custom ROM's allure is over. I the problem I face is no one will help me with the programing part of github and what it takes to work out the coding. To any device maintainer that could lend a a helping hand that would be great. I will leave this thread open for a few more days.
@Elektroschmock I really didn't think it would have been such an issue. I get it takes a lot of work to do this, but how is anyone supposed to learn anything without trying it themselves. If I have offended anyone then I apologise.
I personally love UNOFFICIAL builds and don't see any harm especially since OFFICIAL builds can be just as unpredictable and/or unavailable
Rondeau79 said:
I know who Rodney Dangerfield is/was. I can build ROM's fairly well, it took 2 years for me on and off to get CM built. I first started rooting and flashing with a low end Metro PCS phone and I finally got my hands on Hammerhead. I have flashed hundreds of different ROM's and kernels over the years. Back in the days at another forum I used to see official and unofficial builds all the time. If people have an issue with my builds then why is everything so called open source. I guess the old school grassroots base of custom ROM's allure is over. I the problem I face is no one will help me with the programing part of github and what it takes to work out the coding. To any device maintainer that could lend a a helping hand that would be great. I will leave this thread open for a few more days.
@Elektroschmock I really didn't think it would have been such an issue. I get it takes a lot of work to do this, but how is anyone supposed to learn anything without trying it themselves. If I have offended anyone then I apologise.
Click to expand...
Click to collapse
It's only because this is confusing users. I get so many logs from users thinking they use lineage but they're using some custom, inofficial homebrew build.
toto-w said:
Yes (as every official version), but you can flash the FED-Patcher to disable it. Just flash it right after LOS.
Maybe Magisk will do the trick too.
Click to expand...
Click to collapse
Does the fadpatcher survice lineage updates or do i need to apply it each and every time?
DDQW said:
Does the fadpatcher survice lineage updates or do i need to apply it each and every time?
Click to expand...
Click to collapse
In the meantime I found out that Magisk modifies the force encryption flag too and Magisk survives OTA updates.

[ROM][BETA][UNOFFICIAL] Lineage 16.0 Bacon with FrancoKernel[9.0.0][13MAR2019]

Built for fun, will maintain until LOS officially supports?
Also it is BETA, so expect bugs maybe.
I'm skipping 90% of words here because if you are here I assume you know what you are doing. And you can either Google, use the search button, or ask.
This is a private work of mine, that I use normally on my spare device. Supported as is.
Disclaimer:
Not responsible for any injuries you do to yourself or your device being damaged caused by this ROM.
Known issues:
Initial Setup for Google is buggy, keep hitting back and retrying works.
INSTRUCTIONS
Clean Flash
Download The ROM & GApps (pick latest one in drive, I use opengapps)
Wipe: System, Data, Dalvik, Cache
Flash ROM + GApps
Reboot & Enjoy
Dirty Flash
Download the ROM
Wipe: Dalvik and Cache
Flash ROM (+Magisk if rooted previously or if want root)
Reboot & Enjoy
Download Folder Link:
https://drive.google.com/open?id=1GIhp9B0rg5Z8lHDz5RIzm-gX4U_XbTHK
Device and Kernel Source:
https://github.com/LineageOS/android_device_oneplus_bacon
https://github.com/KiDwayne/bacon
Contact and Join the group!
https://discord.gg/zB3ubnj
Credits to:
LineageOS Team
@franciscofranco
Join My Discord for discussions!
https://discord.gg/zB3ubnj
Changelog for 07FEB build:
Notification LED works! (Thanks to @dar2q) (might require clean flash to work, do tell)
Updated to Febuary Security!
How stable is LOS16.0 for bacon if this is build straight from source? I saw initial device list in gerrit and still don't see bacon there, maybe it's still too buggy? Can't test it now because I'm away from home
LTMendarynas7 said:
How stable is LOS16.0 for bacon if this is build straight from source? I saw initial device list in gerrit and still don't see bacon there, maybe it's still too buggy? Can't test it now because I'm away from home
Click to expand...
Click to collapse
Other than Setup Wizard being a little buggy God knows why, I use it for Youtube and some work related stuff at home. Pretty fine I guess? I also maintain Oneplus2, I would say Pie is already quite stable.
KiD3991 said:
Other than Setup Wizard being a little buggy God knows why, I use it for Youtube and some work related stuff at home. Pretty fine I guess? I also maintain Oneplus2, I would say Pie is already quite stable.
Click to expand...
Click to collapse
Good to know, still impressed that bacon survived 6 major android versions from kitkat to pie..maybe somebody will support it when Q hits us..who knows. btw ty for shearing unofficial build
Thanks for sharing and all the efforts... Can you please confirm that NFC works on this build (tag reading, GPay, etc.)? aptX support? Ant+ support?
mixmax_dp said:
Thanks for sharing and all the efforts... Can you please confirm that NFC works on this build (tag reading, GPay, etc.)? aptX support? Ant+ support?
Click to expand...
Click to collapse
NFC works. APTx I am not sure as I don't use that. My cheapo bluetooth device doesnt support it themselves.
Great job!
Thanks for the build man, keep up the good work! Just wanted to ask, is SELinux enforcing on this build? Thanks!
I don't want to be that guy but where are the links to the sources you used?
Hey there, thanks for this build! Out of curiosity, did you compile it using TheMuppets' proprietary blobs?
CedArctic said:
Thanks for the build man, keep up the good work! Just wanted to ask, is SELinux enforcing on this build? Thanks!
Click to expand...
Click to collapse
yes it is. As it is basically pure los.
eiwarmer said:
I don't want to be that guy but where are the links to the sources you used?
Click to expand...
Click to collapse
Updated! Thanks for the heads up!
Tomoms said:
Hey there, thanks for this build! Out of curiosity, did you compile it using TheMuppets' proprietary blobs?
Click to expand...
Click to collapse
Yeah, is there something I should know. D:
KiD3991 said:
Yeah, is there something I should know. D:
Click to expand...
Click to collapse
Not at all, don't worry! I'm building LineageOS 16 for the first time today and I've just learnt that, instead of pulling the proprietary files from a pre-existing build running on my phone (as the LineageOS wiki suggests), many use TheMuppets' repos. So I've decided to try, and I asked you because I wanted to know if you used them and faced any issues or not.
Tomoms said:
Not at all, don't worry! I'm building LineageOS 16 for the first time today and I've just learnt that, instead of pulling the proprietary files from a pre-existing build running on my phone (as the LineageOS wiki suggests), many use TheMuppets' repos. So I've decided to try, and I asked you because I wanted to know if you used them and faced any issues or not.
Click to expand...
Click to collapse
The day I knew TheMuppets. Never went back. Hahaha
KiD3991 said:
yes it is. As it is basically pure los.
Click to expand...
Click to collapse
wow.. downloading bro thanks
Does your build LED notification light work or not?
Cuz I also build los 16 from source yesterday, but LED not working..
I started build my personal los16 since January,it never got booted until 20th Jan the maintainer push tons of commit.
Sent from my OnePlus3T using XDA Labs
Goog job @KiD3991,
This is not my daily driver but, so far so smooth, I appreciate the work
Leicxan said:
Does your build LED notification light work or not?
Cuz I also build los 16 from source yesterday, but LED not working..
I started build my personal los16 since January,it never got booted until 20th Jan the maintainer push tons of commit.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
The LED's not working on my personal builds as well, however it works if I boot with permissive SELinux (set via the kernel cmdline) using this zip.
I'm pretty sure the culprit is this commit: https://github.com/LineageOS/androi...mmit/b1a798b50807a6c8b27658eeab323dc6a795f184
Thank you for the build, very solid, good battery life, daily driver material. Led not working, using black theme, however notification is white, setup wizard is buggy as stated, but everything on it is pretty awesome! Thanks again! If you could add screenshot function on to buttons, that would be lovely.
As of now I think SELinux I will let it stay Enforced, unless the LED is requested more. Will start a poll I guess?

Categories

Resources