Hello,
I bought this product : .aliexpress.com/item/Original-Xiaomi-Redmi-Note-2-TD-TDD-Mobile-Phone-MTK6795-Octa-Core-5-5-1920X1080P-2GB/32463256279.html?spm=2114.01020208.3.1.OUID3w&ws_ab_test=searchweb201556_1_79_78_77_80,searchweb201644_5,searchweb201560_6[/url]
After few days I put developer room via mi PC manager( C: xiaomi/downloads/gucci/rom/5.11 ......) but my sound was not good.
I found on youtube video to root phone cwm or twrp some like that, I bricked my phone soft. After I try via minimal fastboot and put my phone in fastboot mode and put on MI pc manager to flash room but in middle of transfer computer show blue screen and transfer interrupted.
Now my phone turn on show Mi logo and restart, I can not enter in fastboot mode (vol down plus power btn)
I instal vcom driver preloader try 2 computer, every usb port- Sp flash tool not show red line- and after I put out cable show broom error 1013 or 2005 (i have original usb Mi cable and also try other usb cable.
I try to found test points but not have.
Please help me.
Thank in advance.
blagotan said:
Hello,
I bought this product : .aliexpress.com/item/Original-Xiaomi-Redmi-Note-2-TD-TDD-Mobile-Phone-MTK6795-Octa-Core-5-5-1920X1080P-2GB/32463256279.html?spm=2114.01020208.3.1.OUID3w&ws_ab_test=searchweb201556_1_79_78_77_80,searchweb201644_5,searchweb201560_6[/url]
After few days I put developer room via mi PC manager( C: xiaomi/downloads/gucci/rom/5.11 ......) but my sound was not good.
I found on youtube video to root phone cwm or twrp some like that, I bricked my phone soft. After I try via minimal fastboot and put my phone in fastboot mode and put on MI pc manager to flash room but in middle of transfer computer show blue screen and transfer interrupted.
Now my phone turn on show Mi logo and restart, I can not enter in fastboot mode (vol down plus power btn)
I instal vcom driver preloader try 2 computer, every usb port- Sp flash tool not show red line- and after I put out cable show broom error 1013 or 2005 (i have original usb Mi cable and also try other usb cable.
I try to found test points but not have.
Please help me.
Thank in advance.
Click to expand...
Click to collapse
Wrong preloader drivers, I guess.
Have a look at the alcatel drivers posted somewhere, those work for me.
blagotan said:
Hello,
I bought this product : .aliexpress.com/item/Original-Xiaomi-Redmi-Note-2-TD-TDD-Mobile-Phone-MTK6795-Octa-Core-5-5-1920X1080P-2GB/32463256279.html?spm=2114.01020208.3.1.OUID3w&ws_ab_test=searchweb201556_1_79_78_77_80,searchweb201644_5,searchweb201560_6[/url]
After few days I put developer room via mi PC manager( C: xiaomi/downloads/gucci/rom/5.11 ......) but my sound was not good.
I found on youtube video to root phone cwm or twrp some like that, I bricked my phone soft. After I try via minimal fastboot and put my phone in fastboot mode and put on MI pc manager to flash room but in middle of transfer computer show blue screen and transfer interrupted.
Now my phone turn on show Mi logo and restart, I can not enter in fastboot mode (vol down plus power btn)
I instal vcom driver preloader try 2 computer, every usb port- Sp flash tool not show red line- and after I put out cable show broom error 1013 or 2005 (i have original usb Mi cable and also try other usb cable.
I try to found test points but not have.
Please help me.
Thank in advance.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Redmi note 2 rom was hermes not gucci. Miflash can detected your phone? If can, then quit miflash and run windroid and selected redmi note 2. Read post #11 on this thread: http://forum.xda-developers.com/redmi-note-2/help/redmi-note-2-downgrade-upgrade-problem-t3243079. Hope it help.
Sent from my 2014817 using Tapatalk
Related
After restoring a TWRP backup, my phone did not boot. Whenever I connect it to a computer the notification light blinks red and Windows 64Bits does not list it the device manager. I have tried both EDL methods, pressing vol + and - and connecting to USB or Testpoint method. I don't see the MIUI logo and I cannot even enter fastboot mode. The only method that gives a "sign" is the testpoint but it lists my phone as: Unknown USB device (Device descriptor request failed)
Any ideas???
Thank you!
I think you have problem with windows, I recommended you to install windows 10 pro x64 and you have no problem with drivers. Have you disabled driver signature verification ? But you try this bellow.
First have you unlocked bootloader ? If bootloader unlocked you can boot phone into fastboot & flash with fastboot. Shutdown phone by hold power button for 10 seconds and fast hold volume down then push usb cable into phone. If first method not working, try reconnect battery and usb cable then hold volume down and connect usb to phone. On phone appear you have entered in fastboot mode. Use fastboot rom to flash via fastboot. Other method is try to disconnect battery and usb cable and connect again, try hold volume up and down and connect usb, also try test point method . If not working it's problem with windows and drivers, what version of windows are you using ? Take care with test point pin's to not damage.
arnes_king said:
I think you have problem with windows, I recommended you to install windows 10 pro x64 and you have no problem with drivers. Have you disabled driver signature verification ? But you try this bellow.
First have you unlocked bootloader ? If bootloader unlocked you can boot phone into fastboot & flash with fastboot. Shutdown phone by hold power button for 10 seconds and fast hold volume down then push usb cable into phone. If first method not working, try reconnect battery and usb cable then hold volume down and connect usb to phone. On phone appear you have entered in fastboot mode. Use fastboot rom to flash via fastboot. Other method is try to disconnect battery and usb cable and connect again, try hold volume up and down and connect usb, also try test point method . If not working it's problem with windows and drivers, what version of windows are you using ? Take care with test point pin's to not damage.
Click to expand...
Click to collapse
Thank you for replying. I have windows 10 x64 installed. I have disabled driver signature verification. The bootloader was unlocked via official manner. I cannot boot into fastboot. The phone is just dead. No response at all. I have successfully done the test point before but my phone was showing the MIU logo and entering fastboot. Now, the phone is just dead. The only sign of life it gives is when I connect it to the computer or charger. The light blinks red.
I try cm 13 and I restore MIUI via twrp then i got this problem.
i try this method " en.miui.com/thread-245347-1-1 " and i can flash MIUI rom via miflash but when press power button the phone wont turn on or vibrate. please help.
sorry for my english.
Test point must work, try to uninstall drivers from windows. First disconnect usb from phone, disconnect battery and usb cable and recoonect.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect usb cable and does test point. If not working you have problem with drivers 99.9%. Try on another pc.
Follow this guide
http://en.miui.com/thread-274589-1-1.html
Device- karbonn titanium octane plus, rebrands - nibiru mars one H1, walton primo v1
i will try to be as informative as possible.
I found my phone off in my pocket, tried to turn it on but freezes on boot/logo screen for some seconds and displays some random horizontal lines on over the logo screen like it crashed or something.
also charging logo screen(screen before the charging animation screen appears) shows some lines and reboots again to charging logo screen and do not shows charging animation.
i was using stock ROM , I thought i would flash stock ROM again using TWRP(installed earlier) but recovery is not opening.
So I tried connecting to my laptop.
In the past, I've used SP flash tool to flash recoveries, it worked fine.
drivers are fine.
now it rarely detects "MediaTek preloader usb vcom port" like it should be, but mostly it detects "MTK usb port" which is useless and don't works.
flashing works only when "MediaTek preloader usb vcom port" is detected and don't work when "MTK usb port".
when "MTK usb port" is detected, SP flash tool just detects, doesn't do anything and after some seconds shows error "S_DL_GET_DRAM_SETTING_FAIL" and solution "Please check your image to matches with your phone which is to be downloaded." please do not focus here as device should have detected as "MediaTek preloader usb vcom port".
when it rarely detects "MediaTek preloader usb vcom port", the flashing process starts but strucks in the middle and fails.
drivers installed in laptop are correct .
what should i do now ???
any other tools can i use ?
I think u have to install again drivers and vcom driver.Did u try format and download option in spflash tool??
luvchandu said:
I think u have to install again drivers and vcom driver.Did u try format and download option in spflash tool??
Click to expand...
Click to collapse
yes, tried format+download option
at the time of this main post i got this error
https://drive.google.com/file/d/0B13R3B9-w5DYTXpLS0xoLV8xMW8/view?usp=sharing
i tried today and got this error
https://drive.google.com/open?id=0B13R3B9-w5DYNEUtX05HR3V1OVk
i have installed these drivers
https://drive.google.com/open?id=0B13R3B9-w5DYR0RyN2Y4a0xoUjA
Download rom again and try
luvchandu said:
Download rom again and try
Click to expand...
Click to collapse
ROM is good, theres no problem with it.
did u saw those images ??
problem is phone is not detected as it should be, ot should be detected as MTK vcom or preloader or something other than simple USB port.
Drivers are installed correctly.
it gives different error different times like in previous images i had post.
Bro i have googled the errors and i found that it is compatibility issue.What is your rom version tell me. I will send you the download link.
---------- Post added at 04:04 AM ---------- Previous post was at 04:01 AM ----------
Bro i have googled the errors and i found that it is compatibility issue.What is your mobiles rom version tell me.It is given on the back side of the phone,remove the battery and check. I will send you the download link.
luvchandu said:
Bro i have googled the errors and i found that it is compatibility issue.What is your mobiles rom version tell me.It is given on the back side of the phone,remove the battery and check. I will send you the download link.
Click to expand...
Click to collapse
here is shot of phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks, but i have the correct ROM. see
downloaded from https://firmwarefile.com/karbonn-titanium-octane-plus
My phone is now bricked because I tried to flash the stock ROM(4.4.2) to my phone(6.0.1). At the time, I didn't know that you must format the phone before I guess, "downgrading" it. After I searched on google that I should format it, I went to SP Flash Tool to format it, and the phone got formatted. Now, all I need to do is to flash the stock ROM right? So I did flash the stock ROM to my phone, made sure that VCOM drivers are installed, using the latest version of SP Flash Tool. BUT, when I connected the phone to my laptop(through USB), the laptop detected it, when I press the Download button on the SP Flash Tool it's just at 0%. I tried to use the Firmware upgrade but still, stuck at 0%. I tried it on another PC and still, no luck. What do I do??? PLEASE HELP. I have until afternoon to fix it on my own because I'll give it to the local mobile repair shop.
BTW, the phone is still charging as I'm writing this thread
First of all install the drivers to your pc
Then, enable usb debugging in developer options in settings
Then, connect your phone
Now check whether pc recognize your phone if yes
Then, power off your phone
Now find the scatter file in sp flash tool and then click on download button
After it connect your switched off phone to pc with a usb cable
You will see that sp flash tool will recognize your device and start formatting and then downloading....
All this process will takes only 4-5 minutes at most.
shashank_4412 said:
First of all install the drivers to your pc
Then, enable usb debugging in developer options in settings
Then, connect your phone
Now check whether pc recognize your phone if yes
Then, power off your phone
Now find the scatter file in sp flash tool and then click on download button
After it connect your switched off phone to pc with a usb cable
You will see that sp flash tool will recognize your device and start formatting and then downloading....
All this process will takes only 4-5 minutes at most.
Click to expand...
Click to collapse
I can't turn on USB Debugging nor access my phone it is bricked and I can't fix it because SP Flash Tool won't recognize the phone and start
AjTheKid said:
I can't turn on USB Debugging nor access my phone it is bricked and I can't fix it because SP Flash Tool won't recognize the phone and start
Click to expand...
Click to collapse
I fixed mine by connecting the test point
You must open your phone and connect ground (any wire to ground) and find the preloader testpoint
Mine was the second test point near the volume control and power button next to the sim or black cable under the orange plastic covering the connector
I dont have the picture but i can give you an example (not s860 but similar)
WARNING: FOR PEOPLE WHO KNOW WHAT THEY ARE DOING!
BE CAREFUL OR YOUR PHONE WILL BE DEAD!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(not actual photo)
Those are test points, find a wire (any electrical wire) screw it to the screw that's holding the motherboard (for ground) and try each one of the test point, be careful not to connect the wire to vcc,vcharge or any 4.xx pins (if you were checking using a multimeter)
Here's a video for disassembling the phone : https://www.youtube.com/watch?v=Ry37RjmnZRo
And here's for reference : http://forum.gsmhosting.com/vbb/f672/lenovo-a850-dead-boot-how-easy-jtag-1868940/index2.html
http://forum.gsmhosting.com/vbb/f958/a850-lenovo-dead-while-flashing-1888753/
After you find the test point, the phone will be detected by the computer as vcom or something, quickly install the mtk65xx driver (if you haven't install yet) and flash the stock rom using sp flash.
Best of luck.
Hello everyone I hope I'm doing this right.
I have a bricked lenovo, first I was trying to recover the modem path (flashed by mistake and lose the efs and imei data). I used first lenovo smart assistance, it recover well the phone but none modem fix, then I tried to recover using qfil tool and now I got my device bricked, it just turn on the led into a red light when I plugged in. My pc just recognised as a Qualcomm HS USB QDLOADER 9008.
I hope anyone can help me, I'll be very grateful.
Greetings and have a nice day!
Enviado desde mi hi6210sft mediante Tapatalk
Turbonanox said:
Hello everyone I hope I'm doing this right.
I have a bricked lenovo, first I was trying to recover the modem path (flashed by mistake and lose the efs and imei data). I used first lenovo smart assistance, it recover well the phone but none modem fix, then I tried to recover using qfil tool and now I got my device bricked, it just turn on the led into a red light when I plugged in. My pc just recognised as a Qualcomm HS USB QDLOADER 9008.
I hope anyone can help me, I'll be very grateful.
Greetings and have a nice day!
Enviado desde mi hi6210sft mediante Tapatalk
Click to expand...
Click to collapse
I got the same problem, i flashed my phone with QFIL, after, got a hard brick My lenovo vibe k5 a6020l37, any solution?
Log QFIL when try flashing a rom:
Sahara Version: 0.
Start Sending Programmer
Download Fail Unable to download Flash Programmer using Sahara protocol
Download Fail: Sahara FailSahara Fail
Finish Download.
My phone is reconize in the PC like "qualcomm hs-usb qdloader 9008 " in the devices
just turn on the led into a red light when I plugged in. My pc just recognised as a Qualcomm HS USB QDLOADER 9008. same here bro, just the red light
TrapitoZkaa said:
I got the same problem, i flashed my phone with QFIL, after, got a hard brick My lenovo vibe k5 a6020l37, any solution?
Log QFIL when try flashing a rom:
Sahara Version: 0.
Start Sending Programmer
Download Fail Unable to download Flash Programmer using Sahara protocol
Download Fail: Sahara FailSahara Fail
Finish Download.
My phone is reconize in the PC like "qualcomm hs-usb qdloader 9008 " in the devices
just turn on the led into a red light when I plugged in. My pc just recognised as a Qualcomm HS USB QDLOADER 9008. same here bro, just the red light
Click to expand...
Click to collapse
I hope some kind soul can help us with this problem [emoji20]
Enviado desde mi hi6210sft mediante Tapatalk
I got the same problem
Kimerian666 said:
I got the same problem
Click to expand...
Click to collapse
Did you solve this?
Enviado desde mi C6906 mediante Tapatalk
Please, help us.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi C6906 mediante Tapatalk
Anyone solved this problem?
I have not bricked mine, but I do have problems unlocking my stock Lenovo Vibe K5. Perhaps someone can give a suggestion.
1. I installed ADB on my mac
2. Enabled USB Debugging and OEM Unlock in Developer options
3. Executed adb devices => works and shows device as "device"
4. Executed adb reboot bootloader => the phone reboots but shows only a white screen with the Lenovo logo and a text Powerkey long press can reboot phone
5. Executed fastboot flash recovery twrp-k5-3.0.3-n3_shreps.img => Shows sending 'Recovery' OKAY and finished
6. Executed adb reboot bootloader => still the white logo screen
I would expect to see a bootloader options screen (after 4 already actually)
Ah seems to be possible now to type adb reboot recovery and get into the recovery menu!
mschipperheyn said:
I have not bricked mine, but I do have problems unlocking my stock Lenovo Vibe K5. Perhaps someone can give a suggestion.
1. I installed ADB on my mac
2. Enabled USB Debugging and OEM Unlock in Developer options
3. Executed adb devices => works and shows device as "device"
4. Executed adb reboot bootloader => the phone reboots but shows only a white screen with the Lenovo logo and a text Powerkey long press can reboot phone
5. Executed fastboot flash recovery twrp-k5-3.0.3-n3_shreps.img => Shows sending 'Recovery' OKAY and finished
6. Executed adb reboot bootloader => still the white logo screen
I would expect to see a bootloader options screen (after 4 already actually)
Ah seems to be possible now to type adb reboot recovery and get into the recovery menu!
Click to expand...
Click to collapse
This does not work because we can't access the phone in order to enabled USB Debugging and OEM Unlock
Hi,
I am experiencing issues with my Poco M4 Pro 4G and trying to unlock the bootloader. What I am currently doing is the following;
I enabled developer options, enabled usb debugging and OEM unlocking. I went to unlock status hit agree and hit pair and have waited 7 days for the timer to run out
I shut down the phone and then enter fastboot by holding the volume down button and the power button at the same time.
I downloaded the mi flash unlock tool from here and I logged in using the same account as on the phone, and got up to this screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I then connect the phone which currently has the fastboot logo on to the computer but the button stays grey.
The following is what I have done;
I have installed adb tools. When the phone is booted and is connected to my computer I can see it via "adb devices" in CMD as admin. I can even send it to fastboot mode by "adb reboot fastboot"
I have installed the qualcomm drivers but I am unsure if they are the correct ones.
I have tried with different cables.
I have tried with different PCs.
The computer that I am using mainly to try and unlock the bootloader is a laptop and the specs are as follows;
Model: GP72 2QE Leopard Pro
Intel Core i7 5700HQ
16GB RAM
The other systems that I have tried are almost identifically specced both are AMD based on X570 Mobo and a Ryzen 7 3700X
There does seem to be a known problem with the Mi Unlock tool not being able to communicate properly with the system drivers. There are some tips for getting it working on this thread:
https://forum.xda-developers.com/t/...ol-cannot-detect-phone.3663139/#post-73566526
If that post doesn't solve the problem then try reading through the later posts in that thread.
Sorry for the late reply, I did the suggestion and it worked! Thank you for the help.
My goal was to flash the indonsian rom of the device onto and I had a bit of a problem last night I ended up sending it into a bootloop because the connection wasn't stable from the computer to the phone, I just woke up today and tried it again on a different computer and a brand new cable and the connection wasn't cutting out at all. I put it in fastboot and succesfulyl flashed it. I can't thank you enough for the help.
I just need to know if I need to close this thread or something now that my issue is complete. I'm new around here so I don't know if I shoudl do that.
The Spike Man said:
I just need to know if I need to close this thread or something now that my issue is complete. I'm new around here so I don't know if I shoudl do that.
Click to expand...
Click to collapse
No need, your experience may be shared by others in which case it will be useful to have somewhere to talk about it
The Spike Man said:
Hi,
I am experiencing issues with my Poco M4 Pro 4G and trying to unlock the bootloader. What I am currently doing is the following;
I enabled developer options, enabled usb debugging and OEM unlocking. I went to unlock status hit agree and hit pair and have waited 7 days for the timer to run out
I shut down the phone and then enter fastboot by holding the volume down button and the power button at the same time.
I downloaded the mi flash unlock tool from here and I logged in using the same account as on the phone, and got up to this screen.
View attachment 5681651
I then connect the phone which currently has the fastboot logo on to the computer but the button stays grey.
The following is what I have done;
I have installed adb tools. When the phone is booted and is connected to my computer I can see it via "adb devices" in CMD as admin. I can even send it to fastboot mode by "adb reboot fastboot"
I have installed the qualcomm drivers but I am unsure if they are the correct ones.
I have tried with different cables.
I have tried with different PCs.
The computer that I am using mainly to try and unlock the bootloader is a laptop and the specs are as follows;
Model: GP72 2QE Leopard Pro
Intel Core i7 5700HQ
16GB RAM
The other systems that I have tried are almost identifically specced both are AMD based on X570 Mobo and a Ryzen 7 3700X
Click to expand...
Click to collapse
Are u sure m4 pro 4g is qualcom ?
Thought is mediatek
aariss said:
Are u sure m4 pro 4g is qualcom ?
Thought is mediatek
Click to expand...
Click to collapse
It is mediatek.