Tablet Specs:
Name: Q88 Plus HD 7"
Codename: Q8H_HD (astar_y3)
Motherboard: Q8H-V1.5 20150129 (this is VERY important in order to find a working firmware!)
CPU: AllWinner A33
Storage: 4GB
RAM: 512MB
Screen: 7" 1024x600
Hi everyone.
I rooted this tablet... Everything was going fine until i changed the DPI and tablet crashed...
So i flashed with Phoenix Card (The flash tool) a wrong firmware and now I can't find the right one... I found a pseudo-working firmware but resolution is wrong (800x480) so the screen is buggy.
I searched a lot and I have found a firmware (It's on YaDisk but XDA doesn't let me post the link) that looks suitable for the tablet BUT... It's the only one that the tool doesn't flash! :crying:
Please... Can you help me in order to find a working firmware for my tablet? Thank you in advance!
Nobody can help me?
Up... If I buy a new one... Can I extract the firmware?
Mario1996 said:
Tablet Specs:
Name: Q88 Plus HD 7"
Codename: Q8H_HD (astar_y3)
Motherboard: Q8H-V1.5 20150129 (this is VERY important in order to find a working firmware!)
CPU: AllWinner A33
Storage: 4GB
RAM: 512MB
Screen: 7" 1024x600
Hi everyone.
I rooted this tablet... Everything was going fine until i changed the DPI and tablet crashed...
So i flashed with Phoenix Card (The flash tool) a wrong firmware and now I can't find the right one... I found a pseudo-working firmware but resolution is wrong (800x480) so the screen is buggy.
I searched a lot and I have found a firmware (It's on YaDisk but XDA doesn't let me post the link) that looks suitable for the tablet BUT... It's the only one that the tool doesn't flash! :crying:
Please... Can you help me in order to find a working firmware for my tablet? Thank you in advance!
Click to expand...
Click to collapse
Hey I also bought the same tab from tinydeal and root it, I tried to put Sony libs etc but it crashed, would be so good if someone has the firmware
And yeah if you buy new same tab then u can extract the firmware and make an impact of it, haha I also flashed a firmware and screen was buggy bcz of 800x480
By the way can you share the firmware you found with private message?
I can test and flash on mine if it does
---------- Post added 05-12-2015 at 12:00 AM ---------- Previous post was 04-12-2015 at 11:37 PM ----------
https://yadi.sk/d/tCD-IyTRY4KRi
U mean this firmware?
dontbelive said:
Hey I also bought the same tab from tinydeal and root it, I tried to put Sony libs etc but it crashed, would be so good if someone has the firmware
And yeah if you buy new same tab then u can extract the firmware and make an impact of it, haha I also flashed a firmware and screen was buggy bcz of 800x480
By the way can you share the firmware you found with private message?
I can test and flash on mine if it does
---------- Post added 05-12-2015 at 12:00 AM ---------- Previous post was 04-12-2015 at 11:37 PM ----------
https://yadi.sk/d/tCD-IyTRY4KRi
U mean this firmware?
Click to expand...
Click to collapse
That firmware is the only one that doesn't flash... Yes, that firmware should bring back to glory our tablet.
If I find again the link of the wrong resolution fw I'll post it here... But also if you find something please share it with me here
Mario1996 said:
That firmware is the only one that doesn't flash... Yes, that firmware should bring back to glory our tablet.
If I find again the link of the wrong resolution fw I'll post it here... But also if you find something please share it with me here
Click to expand...
Click to collapse
Okay will do it
Finally I found a working screen firmware!
http://d.wintouch.cc/software/Q75S/Q75SA51119_1024X600.img
Please, can you test it? On my tablet the touchscreen works but has a wrong offset... Can you test it and provide me a feedback? Just to know if it's an hardware or a firmware related issue
Mario1996 said:
Finally I found a working screen firmware!
http://d.wintouch.cc/software/Q75S/Q75SA51119_1024X600.img
Please, can you test it? On my tablet the touchscreen works but has a wrong offset... Can you test it and provide me a feedback? Just to know if it's an hardware or a firmware related issue
Click to expand...
Click to collapse
I will flash after showeeeer thaaaaanks Hahaha I'm curious now if it works or not
EDIT: i tested and i have same problem as u mentioned the screen offset is wrong also the camera orientation is wrong , its a software problem , but its at least nice to know you found a working software with working screen resolution thanks i will do a research now
Mario1996 said:
Finally I found a working screen firmware!
http://d.wintouch.cc/software/Q75S/Q75SA51119_1024X600.img
Please, can you test it? On my tablet the touchscreen works but has a wrong offset... Can you test it and provide me a feedback? Just to know if it's an hardware or a firmware related issue
Click to expand...
Click to collapse
great NEWS for you buddy i found a fully working firmware compatible with our tablets here is the link download and extract it after u extract delete the chinese letters and flash with phoenixsuite hope it will work for yyou haha it will take a while , first it will be full black it will boot after boot complete it will automatically reboot by it self and it will boot completly normal DDD hahahaa im so happy it working A33 7 Inch 1024x600 q8h v1.5
Please can I have the pw for this file?
densysltd said:
Please can I have the pw for this file?
Click to expand...
Click to collapse
There is no need for password, just click and press download, I don't need any password
Big Thanks!
Why is the filename So very different to what i expect?
Q88 Plus HD A33 7" Firmware ---> Y88Xplus-HT-PH-V1-AL-20150829
Is this the correct firmware?
BigJonMX said:
Why is the filename So very different to what i expect?
Q88 Plus HD A33 7" Firmware ---> Y88Xplus-HT-PH-V1-AL-20150829
Is this the correct firmware?
Click to expand...
Click to collapse
I'm sorry, it's very different... You can't use this one.
it works
Mario1996 said:
I'm sorry, it's very different... You can't use this one.
Click to expand...
Click to collapse
I used this firmware. everything works.
As its for Allwinner A33 (q8h-hd) than it doesn't matter what the brand name is
Ok, I'm happy for you!
Hey guys! i have the same tablet, trying to get working firmware :/ resolution seems to be 1024x600, since it's using the whole screen when updating.
But, when i try to update to this firmware it goes almost half way, and doesn't move from there. i really need one.. :/ can you guys help me? All i know about my tablet:
It's 1024x600, original firmware astar_y3-eng 4.4.2 KVT49L 20151112 test-keys (can't find anywhere), and it is A33 and Q8H tab.
kempoo_ said:
Hey guys! i have the same tablet, trying to get working firmware :/ resolution seems to be 1024x600, since it's using the whole screen when updating.
But, when i try to update to this firmware it goes almost half way, and doesn't move from there. i really need one.. :/ can you guys help me? All i know about my tablet:
It's 1024x600, original firmware astar_y3-eng 4.4.2 KVT49L 20151112 test-keys (can't find anywhere), and it is A33 and Q8H tab.
Click to expand...
Click to collapse
This one will Bring it Back
https://www.amazon.com/clouddrive/s...ncoding=UTF8&mgh=1&ref_=cd_ph_share_link_copy
only camera not working
DIRAR11 said:
This one will Bring it Back
only camera not working
Click to expand...
Click to collapse
Thanks!!
it works
Mario1996 said:
Tablet Specs:
Name: Q88 Plus HD 7"
Codename: Q8H_HD (astar_y3)
Motherboard: Q8H-V1.5 20150129 (this is VERY important in order to find a working firmware!)
CPU: AllWinner A33
Storage: 4GB
RAM: 512MB
Screen: 7" 1024x600
Hi everyone.
I rooted this tablet... Everything was going fine until i changed the DPI and tablet crashed...
So i flashed with Phoenix Card (The flash tool) a wrong firmware and now I can't find the right one... I found a pseudo-working firmware but resolution is wrong (800x480) so the screen is buggy.
I searched a lot and I have found a firmware (It's on YaDisk but XDA doesn't let me post the link) that looks suitable for the tablet BUT... It's the only one that the tool doesn't flash! :crying:
Please... Can you help me in order to find a working firmware for my tablet? Thank you in advance!
Click to expand...
Click to collapse
Hi
I know it has been some time, but can you locate the firmware you refer to above as "pseudo-working, but resolution is wrong (800x480)".
I have a tablet (ZYQ Qtab 704) with the same chip/board specifications, except it is 800x480 resolution, and I have been unable to find the correct firmware.
Any help is appreciated.
Cheers
Edit - see update on next page.
Related
Hey guys, I have Nextbook Premium 8SE, I had download Fineless - Bob ROM (Sorry ROM Link is not allowed me to write until my 10 pots), followed the instructions and flash my Next8P12 to make it rooted and google play enabled, but after first boot it don't fulfil all the display, it seems like a 6 inch display. My tab has 8inch screen, in the website of the manufacture is 800x600 resolution.
Experts!!! Please help!!! Please Suggest me what to do? How can I recover my tab screen back?
Does anyone have Rockchip 2918 dump ROM??
regards
Same issue here, any ideas?
asaddotcom said:
Hey guys, I have Nextbook Premium 8SE, I had download Fineless - Bob ROM (Sorry ROM Link is not allowed me to write until my 10 pots), followed the instructions and flash my Next8P12 to make it rooted and google play enabled, but after first boot it don't fulfil all the display, it seems like a 6 inch display. My tab has 8inch screen, in the website of the manufacture is 800x600 resolution.
Experts!!! Please help!!! Please Suggest me what to do? How can I recover my tab screen back?
Does anyone have Rockchip 2918 dump ROM??
regards
Click to expand...
Click to collapse
hard_next said:
Same issue here, any ideas?
Click to expand...
Click to collapse
no one replied till long as i submitted my query, and still i didn't get the solution, my tab is still injured..
no one yet has a solution for this problem
I have the same problem and can not solve urgently needed help.
hey guys, i have a cnm touchpad 7dc, brought it from argos,
my problem is that last week when i turn on the tablet it stuck on the boot screen, i tried hard reset but i stuck on boot again, then i decided to flash it, i downloaded the moded firmware from ZAKEHH BLOG
CNM TOUCHPAD 7DC
ANDROID-JB-4.1.1 BASED:
Stock firmware with root enabled
i flashed it using Rockchip batch tool v 1.7
flash went okay, but after flashing was done my tablet didnt boot, not even in recovery mod, i flashed it again but same,
i tried the cnm website to download firmware from there but the website seems to be down, n\
Now im stuck with it and i reallyyy need help!!! )=
PLease help
Anyone?
xain1568 said:
hey guys, i have a cnm touchpad 7dc, brought it from argos,
my problem is that last week when i turn on the tablet it stuck on the boot screen, i tried hard reset but i stuck on boot again, then i decided to flash it, i downloaded the moded firmware from ZAKEHH BLOG
CNM TOUCHPAD 7DC
ANDROID-JB-4.1.1 BASED:
Stock firmware with root enabled
i flashed it using Rockchip batch tool v 1.7
flash went okay, but after flashing was done my tablet didnt boot, not even in recovery mod, i flashed it again but same,
i tried the cnm website to download firmware from there but the website seems to be down, n\
Now im stuck with it and i reallyyy need help!!! )=
Click to expand...
Click to collapse
Did you try to find firmware with bord Id
Search on Google (how to find chinese tablet firmware with board Id
waheem said:
Did you try to find firmware with bord Id
Search on Google (how to find chinese tablet firmware with board Id
Click to expand...
Click to collapse
"w7 rk3066 mb v5.1"
this is the board id i guess. I don't think there is any firmware with this board id yet. =/
there is also one thin i want to tell. when i flashed my tablet with mk808 b finless rom whic was for android tv stick, the tablet turned on with a white screen. and some guys had the sme problem with 9dc tablet and they fixed it. they were discussing here on xda but no one comes online now.
xain1568 said:
"w7 rk3066 mb v5.1"
this is the board id i guess. I don't think there is any firmware with this board id yet. =/
Click to expand...
Click to collapse
Where you find this I'd
Did you decompile your tab?
Because it is inside motherboard
I found a working firmware.
waheem said:
Where you find this I'd
Did you decompile your tab?
Because it is inside motherboard
Click to expand...
Click to collapse
Hey thank you very much for your help. You gave me the idea of board I'd. The board I'd was correct I found it on the board.
Actually I couldn't find a firmware with that board I'd with V5.1 I found one firmware for board I'd with v5.2 I gave it a shot and it worked!. Thankyou very much for your responses and help. I've got a working tab after almost 1 and half year. Many thanks. =)
xain1568 said:
Hey thank you very much for your help. You gave me the idea of board I'd. The board I'd was correct I found it on the board.
Actually I couldn't find a firmware with that board I'd with V5.1 I found one firmware for board I'd with v5.2 I gave it a shot and it worked!. Thankyou very much for your responses and help. I've got a working tab after almost 1 and half year. Many thanks. =)
Click to expand...
Click to collapse
Good to help you Just press thank button
I have the exact same problem
xain1568 said:
Hey thank you very much for your help. You gave me the idea of board I'd. The board I'd was correct I found it on the board.
Actually I couldn't find a firmware with that board I'd with V5.1 I found one firmware for board I'd with v5.2 I gave it a shot and it worked!. Thankyou very much for your responses and help. I've got a working tab after almost 1 and half year. Many thanks. =)
Click to expand...
Click to collapse
HI Mate,
Appreciate it's an ancient thread but you are my last hope. I have a CNM 7DC and I've been searching the net for quite some time but was unable to find the firmware for this tablet. It's an old device and all the links with information / firmware have expired. If you still have the firmware you found would you be able to make it available for me?
Thanks.
Lojo
lojo83 said:
I have the exact same problem
HI Mate,
Appreciate it's an ancient thread but you are my last hope. I have a CNM 7DC and I've been searching the net for quite some time but was unable to find the firmware for this tablet. It's an old device and all the links with information / firmware have expired. If you still have the firmware you found would you be able to make it available for me?
Thanks.
Lojo
Click to expand...
Click to collapse
did you find it?
Good day!
I wounder if anybody can help me here...
Few weeks ago I got a 9.7 inch tablet what is looks like E-ceros revolution tablet but not real one... (China copy without any description on the back lid).
It was very laggy so I decided to write tweaked rooted firmware for E-ceros revolution tablet. All specs where the same:
RK3188 CPU 1,6GHZ; Mali 400 GPU; 9.7 inch... All details(book photos and other) attached...
After I flashed the firmware("Ceros Revolution CT9716 Android 4.4.2 KitKat custom root firmware" or after failure the Q9white_update_FT5406_20130806.img) using RKAndoidtool 1.7. I figured out that forgot to make the backup of entire device, when tablet rebooted I see black screen(with back light) and computer show as usb device connected... But no image on screen...
Complete disaster it is a new tablet, never used and bricked...
I found that after firmware flash using adb shell I get root mode but not for long(for about 2 min., later tablet getting disconnected by it self) and after reboot no more root mode... Need reflash again...
In root mode I succeeded to get some logs(adb dmesg) and data about the tablet. (see .txt file attached)
Can anyone help me in such situation? I can donate some money if succeeded...
P.S: To make sure that it is rk3188 device I opened tablet and checked the chip on board...
septera said:
Good day!
I wounder if anybody can help me here...
Few weeks ago I got a 9.7 inch tablet what is looks like E-ceros revolution tablet but not real one... (China copy without any description on the back lid).
It was very laggy so I decided to write tweaked rooted firmware for E-ceros revolution tablet. All specs where the same:
RK3188 CPU 1,6GHZ; Mali 400 GPU; 9.7 inch... All details(book photos and other) attached...
After I flashed the firmware("Ceros Revolution CT9716 Android 4.4.2 KitKat custom root firmware" or after failure the Q9white_update_FT5406_20130806.img) using RKAndoidtool 1.7. I figured out that forgot to make the backup of entire device, when tablet rebooted I see black screen(with back light) and computer show as usb device connected... But no image on screen...
Complete disaster it is a new tablet, never used and bricked...
I found that after firmware flash using adb shell I get root mode but not for long(for about 2 min., later tablet getting disconnected by it self) and after reboot no more root mode... Need reflash again...
In root mode I succeeded to get some logs(adb dmesg) and data about the tablet. (see .txt file attached)
Can anyone help me in such situation? I can donate some money if succeeded...
P.S: To make sure that it is rk3188 device I opened tablet and checked the chip on board...
Click to expand...
Click to collapse
Hi,
I have a firmware for a tablet like yours (i dont know if its a Revolution clone - Memup Elite 9716). Maybe you will be able to try the firmware at least.
I can't upload it now, but I'll probably tomorrow.
bernardstef said:
Hi,
I have a firmware for a tablet like yours (i dont know if its a Revolution clone - Memup Elite 9716). Maybe you will be able to try the firmware at least.
I can't upload it now, but I'll probably tomorrow.
Click to expand...
Click to collapse
I'll be very thankful and can donate some money if it fits... Already tried about 7 different kernels and firmwares from similar tablets... No luck.... May be yours one works...
Will be waiting for the answer....
septera said:
I'll be very thankful and can donate some money if it fits... Already tried about 7 different kernels and firmwares from similar tablets... No luck.... May be yours one works...
Will be waiting for the answer....
Click to expand...
Click to collapse
Dull ! I forgot about this post I made ... Sorry
My tablet is a Memup brand:
http://www.cdiscount.com/informatiq...9716-quad-core/f-10798010212-spelite9716.html
I flashed a "OMA" ROM on it (4.4.2 I think), and I have the original rom at home and I guess I can (slowly!) upload it on a server.
Is it the same as yours ? - no money needed, lol . But if I can help you recover this tablet it would be great.
Maybe you could try this ROM, the one I flashed:
https://www.dealabs.com/url/?e=AGfyxEyWcavcqyVJeRhZp7d5F8Z0KrLcgoS1mbga6vPZ1aLCP38R53nhHk/SlqhM
A procedure is included in English, in this file. I followed those and it's working.
I think that your tablet isn't bricked, as it's detected by your computer.
Some steps requires bootloader mode : https://download.chinavasion.com/download/Others/ceros_rev_firmware_install_9470.pdf
bernardstef said:
Dull ! I forgot about this post I made ... Sorry
My tablet is a Memup brand:
I flashed a "OMA" ROM on it (4.4.2 I think), and I have the original rom at home and I guess I can (slowly!) upload it on a server.
Is it the same as yours ? - no money needed, lol . But if I can help you recover this tablet it would be great.
Maybe you could try this ROM, the one I flashed:
A procedure is included in English, in this file. I followed those and it's working.
I think that your tablet isn't bricked, as it's detected by your computer.
Some steps requires bootloader mode :
Click to expand...
Click to collapse
Thank you. Had no time to write earlier... Sorry... , But problem already solved i n here:
arctablet.com/blog/forum/firmware-flashing-on-rockchip-based-devices/e-ceros-revolution-clone-rk3188-need-working-firmware/page-2/
Got the original firmware from seller and Oma helped me with custom build.
Anyway thank you for the trying to help me
septera said:
Thank you. Had no time to write earlier... Sorry... , But problem already solved i n here:
arctablet.com/blog/forum/firmware-flashing-on-rockchip-based-devices/e-ceros-revolution-clone-rk3188-need-working-firmware/page-2/
Got the original firmware from seller and Oma helped me with custom build.
Anyway thank you for the trying to help me
Click to expand...
Click to collapse
Nice !
This tablet is great with 4.4.2 on it
Cheers !
Hey guys.I have a Irulu eXpro 7" 4.4.2 tablet with 2 cameras micro sd slot quad-core A33 with A23 processer with
SN: XA791XSL1509253A#1244.Right now this tablet is in a bootloop with corrupted OS.I looked all over the net for a firmware but was unable to find one. its is a 1024*600 resolution tab.I was wondering if there are any firmware that will work for this tab.
It doesnt have the be exact for the tab not the stock rom,or the the original firmware.Just one that will work with it.I already tried a trimeo tab firmware but it didnt work.I tried a another A33 firmware but no sucess.OK so heres how I bricked my tablet.I used some app called kingroot not kingoroot to root.Then I used rom toolbox apps not rom manager.Then I downloaded this file
: http://forum.xda-developers.com/atta...9&d=1341405306
I then extracted it then went to rom toolbox app clicked on flash,recovery then I pressed Flash.It said success.So I went back to my
launcher,clciked settings,Backup and Reset
Clicked on boot into recovery it said Shutting Down then it restarted.And it looked like this
And it just stays there forever.I went on the irulu website but counldnt find the firmware.I emailed them they couldnt help.
I tried tons of diffrent andriod fourms and sites.Still nothing.I heard that i could get the firmware by opening up the tablet
and getting the board id but i scared i might break or crack it.Its a 16gb tablet with 400-500 mb ram.I cant connect it to my pc
because its not showing up in device manager.Please if you have any kind of firmware that will work for this device please post it here.I cant find any firmware anywhere.I really need this tab back because Its fast and has good storage.It has andriod 4.4.2 kitkat on it.Brand new.So if you have any firmware please post it here.Thank you very much
help
Same here... Firmware would be much appreciated
Sent from my XT1575 using XDA Free mobile app
Same here i'am not the only one!!! is great jejejejej
[email protected] said:
Same here i'am not the only one!!! is great jejejejej
Click to expand...
Click to collapse
Thanks but this might take years
heres download link
https://cloud.mail.ru/public/2c9440...920--TZX723Q2-A23-8089-20141223(from DEV).rar
boyam99 said:
heres download link
https://cloud.mail.ru/public/2c9440...920--TZX723Q2-A23-8089-20141223(from DEV).rar
Click to expand...
Click to collapse
Would this work for my irulu x7
SN: ax767jg1412011e
Keep in mind my volume buttons DO NOT work while in recovery.
I also get the com.android.phone error every second and it pops back up right after I click Okay.
I have few questions regarding Allwinner H616 OR H313 boards?
1) Does anyone have rooted firmware for Allwinner H616/4/32/Android 10 or H313/2/16/Android 10 ? If yes, plz share it.
2) Does Allwinner support rotation? If you have this support in firmware, plz let me know.
3) I could not find any setting in X96Q or X96 Mate to change device resolution to 720P (not even in display setting,AUTO also does not work for me).
4) Is there any way to change boot logo and boot video in these devices?
this was posted a little while back in the T95 thread (allwinner h616)
T95 Allwinner H616 TV Box
Just thought I would post regarding this box. Not much information on it. I bought on a whim without realising the one thing I wanted was missing (Bluetooth). However the box has grown on me. Its powered by the new Allwinner H616 Chip. However...
forum.xda-developers.com
the person who posted it is a decent guy, I'd talk to him to confirm the partition sizes and suitability.
Did you manage to get anything for H313?
2n2u said:
Did you manage to get anything for H313?
Click to expand...
Click to collapse
No
techplugger said:
No
Click to expand...
Click to collapse
I've used this one: https://forum.xda-developers.com/t/x96q-allwinner-h313.4151997/#post-84321427