Sharing my work.
- Colored Statusbar Icons (Wifi, Data, Flight Mode, 5-Signal)
- Updated Vibrate, Silence Mode, Bluetooth and lock screen Camera.
- Gauge Battery with 1 % steps implemented
Base LGSystemUI from:
Genisys Rom MM 20x
Imperium Rom MM 20xx
Just Flash with TWRP.
Enjoy.
Download Link:
http://d-h.st/PfVt 3.2 Base 20B (815)
http://d-h.st/ZurC 3.4/3.5 Base 20B (815)
http://d-h.st/bZsr 3.4/3.5 Base V2 20B (added 4g+ data indicator) (815)
http://d-h.st/XzPI 3.6 Base 20C (815)
http://d-h.st/wjfx 3.7 Base 20D (815)
http://d-h.st/ugQJ 3.7.1 Base 20i (811)
http://d-h.st/3Unq 3.7.1 Base 20i with some adjustments for TMUS LTE+ (811)
http://d-h.st/Sz1E 3.8 Base 20E (815)
http://d-h.st/wb3W 4.2 Base 20F (815)
http://d-h.st/Ifv7 4.3 Base 20H (815)
http://d-h.st/P6he v6.0 Imperium base. 20H (used the version with no statusbar buttons as base) (815)
http://d-h.st/H0Ig v7.0 Imperium base. 20i (used the version with no statusbar buttons as base) (815)
http://d-h.st/53Tb 4.7 Base 20j (815)
http://d-h.st/Eg1J 4.8 Base 20j (815)
http://d-h.st/KB7Z v8.0 Imperium base. 20L (used the version with no statusbar buttons as base) (815)
http://d-h.st/4RtP v9.0 Imperium base. 20H Base. With No StatBar buttons (815)
http://d-h.st/vc3i v10.0 Imperium base. 20J Base. With No StatBar buttons (815)
http://d-h.st/FecX v11.0 Imperium. 20K Base. With No StatBar buttons (815)
https://dailyuploads.net/m8mqgfoihdz0 v12.0 Imperium. 20G Base. With No StatBar buttons (815)
https://dailyuploads.net/p2hur7vkmuvj v13.0 Imperium. 20L Base. With No StatBar buttons (815)
https://dailyuploads.net/6w7fxnpcutrz
v14.0 Imperium. 20P Base. With No StatBar buttons (815)
See attachment for some details...
does this works with lollipop 5.1?
It is MM base. I dont think it will work. You can try. But take a full bu.
any version for genesys 3.5 ?
nabil427 said:
any version for genesys 3.5 ?
Click to expand...
Click to collapse
3.4 has the same base as 3.5. So it works without any issues. You can flash the 3.4 without any problems.
this work on 3.5 thanx man
As SezerSzimek is uploading (even though from yesterday ) 3.6 Genisys based on 20C, is there any chance to update? Please!!!
phsnake said:
As SezerSzimek is uploading (even though from yesterday ) 3.6 Genisys based on 20C, is there any chance to update? Please!!!
Click to expand...
Click to collapse
Of course. As soon as 20c is available. I am also waiting
Yep I'm desperately waiting too, refreshing every 5-10min , hopefully the reboot bug will be fixed.
20c base is up!
THX, just downloaded & installed - waiting for boot (I wiped dalvik & cache) it will be long 10 mins
phsnake said:
THX, just downloaded & installed - waiting for boot (I wiped dalvik & cache) it will be long 10 mins
Click to expand...
Click to collapse
Let me know the results. It should be fine.
Yes it's fine - as it was with previous version, as it is on imgs you posted THX
20D is up!
Is there any way to go back to stock? Besides a full backup or re-flash?
rick09 said:
Is there any way to go back to stock? Besides a full backup or re-flash?
Click to expand...
Click to collapse
Of course. I will create one back to stock zip today...
orhtun01 said:
Of course. I will create one back to stock zip today...
Click to expand...
Click to collapse
Awesome! Not that I'm in a big hurry to go back to stock but I'd like the option. One thing that's bugging me is the battery percentage text keeps disappearing. I can barely read the one of the actual battery graph. Lowered DPI to 540 so it's very small.
I can use Gravity Box to get the percentage to stick but I don't like using 2 separate mods on the same thing. Seems excessive, and could lead to issues.
rick09 said:
Awesome! Not that I'm in a big hurry to go back to stock but I'd like the option. One thing that's bugging me is the battery percentage text keeps disappearing. I can barely read the one of the actual battery graph. Lowered DPI to 540 so it's very small.
I can use Gravity Box to get the percentage to stick but I don't like using 2 separate mods on the same thing. Seems excessive, and could lead to issues.
Click to expand...
Click to collapse
No Problem. Here you go...
http://d-h.st/fDvp
This should go back to stock. V20D.
orhtun01 said:
No Problem. Here you go...
http://d-h.st/fDvp
This should go back to stock. V20D.
Click to expand...
Click to collapse
Haha, you're probably going to hate me! Any chance you could make this to work with the H811 Marshmallow base? Now that Genisys released the H811 version I switched to that since that is closer to stock rom for me. I do like your mod though. I asked for a way to revert to stock but never ended up using it. I just couldn't let go of the colored icons!,
rick09 said:
Haha, you're probably going to hate me! Any chance you could make this to work with the H811 Marshmallow base? Now that Genisys released the H811 version I switched to that since that is closer to stock rom for me. I do like your mod though. I asked for a way to revert to stock but never ended up using it. I just couldn't let go of the colored icons!,
Click to expand...
Click to collapse
I did not try the 811 version yet. Does it work well on the h815 with patch? Let me see.... Hahaha... There is no reason to hate you. We just share our stuff. Enjoy your weekend.
Related
Here's another thread, since I was so kindly contacted the first time (not) about a 'placeholder'.
A few things to note before downloading and flashing this ROM.
-You MUST be on an updated bootloader for this to boot. If you're not, it will NOT boot.
-This coincides with the above, but you need to also be on a 4.4 compatible recovery such as TWRP or Philz CWM.
-I have removed Knox so I suppose this is no longer a Stock Rooted, but more like Stockish Rooted.
[size=+4]DOWNLOAD HERE[/size]
FULL ROM:
Odex:
Sprint Touchwiz KitKat 4.4.4 N900PVPUDNH7
MD5: 9dca3db2e06c3b073d7f090083f772ca
DeOdex:
Sprint Touchwiz KitKat 4.4.4 N900PVPUDNH7
MD5: bbec8cbb6668338e00ae70dfdd6ac617
[size=+4]WiFi problems?[/size]
Try this:
Due to "securestorage" being set to true in build.prop, changes to the ROM or kernel that aren't reflected in the ss_id file in /system/etc/secure_storage/.system.bin.wpa_supplicant/ can cause issues with WiFi among other things. You can set this to false yourself, or simply flash the zip file below.
Download: Set Secure Storage to False
For those that prefer to do it manually, simply change this line ro.securestorage.support=true to false in /system/build.prop.
OLD 4.4.2 NC5(D):
FULL ROM:
Odex:
Sprint Touchwiz KitKat 4.4.2 N900PVPUCNC5
MD5: 03a3a1b2b543d541932e0d4ef6c3caea
DeOdex:
Sprint Touchwiz KitKat 4.4.2 N900PVPUCNC5
MD5: 058cee54902b04b5826aabe65cd98d41
Odex:
Sprint Touchwiz KitKat 4.4.2 N900PVPUCNC5D
MD5: e1bca95547f41283f166c24cadd252d4
DeOdex:
Sprint Touchwiz KitKat 4.4.2 N900PVPUCNC5D
MD5: 096180c7c7676b05912f9d0dada9c267
OLD 4.4.2 NAB(D):
Odex:
Sprint Touchwiz KitKat 4.4.2 N900PVPUCNAB
MD5: 688f0c6d56f217bdaae31a76b8b85084
DeOdex:
Sprint Touchwiz KitKat 4.4.2 N900PVPUCNAB
MD5: 06b79ab13cf9e246eb255de14ccd94fb
Odex:
Sprint Touchwiz KitKat 4.4.2 N900PVPUCNABD | Mirror
MD5: 894465a36c40a7a1e978da6bf0e7bc06
DeOdex:
Sprint Touchwiz KitKat 4.4.2 N900PVPUCNABD | Mirror
MD5: 7d0749d2362d872ca8db7c524d25bf40
OLD 4.3: Incompatible if you have updated to 4.4.x.
FULL ROM:
Odex:
Sprint Touchwiz Jelly Bean 4.3 N900PVPUBMJ4
MD5: f4ec3674585be68c70fd5fc6c8e794f8
DeOdex:
Sprint Touchwiz Jelly Bean 4.3 N900PVPUBMJ4
MD5: 2ad70b4e12fcca2fc63e924a0f1f3dce
[size=+4]MODs and Addons[/size]
Remove KNOX:
For those who keep getting the shielded icon message about an application making changes to your phone blah blah blah, removing Knox will solve that.
Download: Remove KNOX
Odex:
Sprint Touchwiz Jelly Bean 4.3 N900PVPUBMI5 | AFH Mirror
MD5: 7DB07CC726BFF870083D6AF79C5BAC3A
DeOdex:
Sprint Touchwiz Jelly Bean 4.3 N900PVPUBMI5 | AFH Mirror
MD5: 5b5ebef2070d3daf0b047aa0094135de
Changelog:
9/15/14: Updated to 4.4.4 KitKat (NH7)
3/31/14: Updated to 4.4.2 KitKat (NC5[D] options) and fixed knox removal
2/20/14: Updated to 4.4.2 KitKat (NAB[D] options)
11/6/13: Added Remove KNOX addon.
11/5/13: Uploaded full ROM with fixes.
11/4/13: Fixed WiFi password re-enter and other bugs.
10/27/13: Update to MJ4
10/6/13: Initial Release
Thanks
Sent from my SM-N900P using XDA Premium 4 mobile app
Is there still an issue using TB and Knox? Just curious, thanks
Sent from my high priced pay phone across the street from the liquor store.
tandxcstar1 said:
Is there still an issue using TB and Knox? Just curious, thanks
Sent from my high priced pay phone across the street from the liquor store.
Click to expand...
Click to collapse
Yup, the TB team will have to provide a workaround. Or maybe If we can set selinux to permissive without having to have a custom kernel or something.
The workaround found here works too, just kind of annoying to have to do all the time.
Stock Bugs?
Will this have the StockROM bugs aswell? the Developer option (transition animation) and Camera bug (front facing camera beauty mode).
Thanks for the ROM!:good:
freeza said:
Yup, the TB team will have to provide a workaround. Or maybe If we can set selinux to permissive without having to have a custom kernel or something.
The workaround found here works too, just kind of annoying to have to do all the time.
Click to expand...
Click to collapse
Ya I agree on the annoying part. I was just having wishful thinking and hoping on a ROM level it could be worked around. Then I was thinking hellllo its security embedded in the phone like the NSA is to the Govt. Just wish it wasn't around lol. Thanks for the Deodexed!:good:
tandxcstar1 said:
Ya I agree on the annoying part. I was just having wishful thinking and hoping on a ROM level it could be worked around. Then I was thinking hellllo its security embedded in the phone like the NSA is to the Govt. Just wish it wasn't around lol. Thanks for the Deodexed!:good:
Click to expand...
Click to collapse
haha, well i mean... I won't say it's impossible to do ROM side, but since this is only a Stock ROM, I didn't change anything. Now that this is uploaded, I can start tinkering with the ROM and figure things out!
drewiskee said:
Will this have the StockROM bugs aswell? the Developer option (transition animation) and Camera bug (front facing camera beauty mode).
Thanks for the ROM!:good:
Click to expand...
Click to collapse
I assume so. Since nothing is changed from stock besides the DeOdex part. But I will be ripping this thing apart now.
Why must goo.im have 43kbs downloads?
asacado said:
Why must goo.im have 43kbs downloads?
Click to expand...
Click to collapse
lol ya I am in the same boat. However I did DL the Odex version in record time lol.
tandxcstar1 said:
lol ya I am in the same boat. However I did DL the Odex version in record time lol.
Click to expand...
Click to collapse
Dunno, but I am stuck downloading it offa verizon 4g (gotta love unlimited data). Getting spikes between 17kbs to 127. Looking upwards of an hour to get this first rom. But great note that I am rooted and TWRP'd. Now to rom and get rid of bloatware.
Speaking of which, wtb debloated odexed rom. That would honestly set my ship until jedi or any other developers look towards us.
Is the N900PVPUBMI5 firmware included or do I have to install it separately?
Does these Roms ([ROMv2|StockRooted] 10/6/13 Sprint TouchWiz Jelly Bean 4.3 (N900PVPUBMI5) Odex/DeOdex) included the N900PVPUBMI5 firmware?
jamice4u said:
Does these Roms ([ROMv2|StockRooted] 10/6/13 Sprint TouchWiz Jelly Bean 4.3 (N900PVPUBMI5) Odex/DeOdex) included the N900PVPUBMI5 firmware?
Click to expand...
Click to collapse
yes
I'll be posting a separate flashable for the firmware. For those who are still on MI3 and haven't received an update notification because of root status or what have you.
I'm uploading the AFH mirrors right now.
Bootloop. What should I do?
time to start theming!
thanks freeza!
talktojer said:
Bootloop. What should I do?
Click to expand...
Click to collapse
What were your flashing steps? Did you make sure the MD5 matched?
I test flashed both of them with success.
freeza said:
What were your flashing steps? Did you make sure the MD5 matched?
I test flashed both of them with success.
Click to expand...
Click to collapse
I just flashed as zip file from OUDHS CWM Recovery SM-N900P 1.0.3.6
I did not check the md5, but I'm downloading the other zip file this time, see if that works.
---------- Post added at 11:42 PM ---------- Previous post was at 11:37 PM ----------
checked md5 on odex file, and it matched...flashed it twice.
---------- Post added 7th October 2013 at 12:00 AM ---------- Previous post was 6th October 2013 at 11:42 PM ----------
talktojer said:
I just flashed as zip file from OUDHS CWM Recovery SM-N900P 1.0.3.6
I did not check the md5, but I'm downloading the other zip file this time, see if that works.
---------- Post added at 11:42 PM ---------- Previous post was at 11:37 PM ----------
checked md5 on odex file, and it matched...flashed it twice.
Click to expand...
Click to collapse
Same deal with the deodexed file...md5 matches on both. what should I do? Any suggestions?
freeza said:
What were your flashing steps? Did you make sure the MD5 matched?
I test flashed both of them with success.
Click to expand...
Click to collapse
Freeza, if you'll debloat it as well, I'll buy you a case of the finest beer a quickee mart can supply!
freeza said:
What were your flashing steps? Did you make sure the MD5 matched?
I test flashed both of them with success.
Click to expand...
Click to collapse
What I've done so far is flash over team win recovery, and flashed this from there. now instead of bootlooping. I'm getting to the yellow Sprint logo, and it's stopping there.
pulsing blue light.
Same with odex and deodex.
talktojer said:
What I've done so far is flash over team win recovery, and flashed this from there. now instead of bootlooping. I'm getting to the yellow Sprint logo, and it's stopping there.
pulsing blue light.
Same with odex and deodex.
Click to expand...
Click to collapse
Are the MD5's matching? Also is the size of the file 1.3gbs? I had a download stop and fail causing that kind of issue.
I need your help to keep my service running, because i work alone. Earns no revenue. If you are in a position to help me, please do consider making a donation to me.
SpArTaXx RoM 2.0
The Smoothest --- The Fastest --- No Battery Drain
Simply The Best Than Ever
All Variants of G3 Phones
With Init.d Support --- Fully Deodexed --- Tweaked --- Debloated
SpArTaXx RoM 2.0
<*>Added Call Recording</*>
<*>LG Voice Mate</*>
<*>Fixed strange text at booot for D855 variant</*>
<*>Added G4 Lg Health</*>
<*>Fixed LG Cover</*>
<*>Fixed D851 Bluetooth FC</*>
<*>Fixed Calendar Sync</*>
<*>Added TAction</*>
<*>Fixed QuickCircle</*>
<*>Fixed QRemote</*>
<*>Fixed SmartWeather (wipe data first)</*>
<*>Added Gabriel Kernel 0.6 for G3 apps on D855 thanks to @mostafaz</*>
<*>Added Navel Kernel 2.1 for G4 apps on D855 thanks to @engine95</*>
Essential Mod to make this Rom as fast as possible
[/LIST]
SpArTaXx RoM 1.2
For all variants of G3 Phones
Bases on V20P
Aroma Options (Sharpering , variants , G4 or G3 Apps, CCT Mod , Volume Booster)
Fixed big icons screen
Debloated
Deodexed
Zipaligned
Network , Ram , Battery , Touch , ADBlock Tweaks ( Rom Flys Believe in me)
Tinted navbar and statusbar
30 Navbar DPI
Stock SystemUI
Root Browser
Essential Mod to make this Rom as fast as possible
PLEASE DON'T MIRROR LINKS!!!
THANKSPAYPAL DONATION :laugh:
DONATE ME
Thanks for donations to @Subsonic44 15$ , @Derrel 10€ , @fabricatedhero 10$ , i don't know 2€
XDA:DevDB Information
[F400/L/S/K/D855/0/1/2][Based on 20P]SpArTaXx RoM 2.0[The Smoothest - The Fastest], ROM for the LG G3
Contributors
savergiggio
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: 31/05/2015
Stable Release Date: 2015-05-31
Created 2015-06-01
Last Updated 2015-06-09
Installation Guide
Installation
[*]Install a Rom based on V20P
[*]Download SpArTaXx Rom
[*]Format Data, System, Factory Reset , Cache and Davilk
[*]Flash SpArTaXx RoM
[*]Don't worry about message symlink error at the end just rebbot
Very Important , if you want to install g3 apps on g4 from zip rom you must do a full wipe
DOWNLOAD LINKS REMOVED FOR XDA RULES VIOLATIONS
Google+ Community to stay tune
Why did you start an entire new thread? It would've been more convenient to add this to the original Spartaxx thread...
D33PO said:
Why did you start an entire new thread? It would've been more convenient to add this to the original Spartaxx thread...
Click to expand...
Click to collapse
Yes bro i know , but the previous thread was very crowd and confusion.... Sorry
Thank you for hearing and accepting our requests, @savergiggio, this proves that you are a great developer. I will test this rom as soon as possible and let you know. Have a good day
Download Link
Download Link?
Kairos- said:
Thank you for hearing and accepting our requests, @savergiggio, this proves that you are a great developer. I will test this rom as soon as possible and let you know. Have a good day
Click to expand...
Click to collapse
xsbxhome said:
Download Link?
Click to expand...
Click to collapse
Thks for support guys , download link soon i'm uploading the rom....
Join in Google+ community look for SpArTaXx RoM lg g3
Thanks for listening to our feedback and implementing it... Will download and try it as soon as it is up
BTW, is it useful to use L speed mod or u use already most of the tweaks?
jochem86 said:
Thanks for listening to our feedback and implementing it... Will download and try it as soon as it is up
BTW, is it useful to use L speed mod or u use already most of the tweaks?
Click to expand...
Click to collapse
No don't use it , you don't need it
huhuhu.and i just finished downloading v1 and v1.1...so this is different right? :'(
bdw.on this rom, no need nitrox? only the cttmod and fpsunlock?
When you say all Variants do you mean it also includes support for the Cat.6 G3???
savergiggio, I would post an alert in the other ROM thread, so people stop downloading and flashing.
chacho_2me said:
huhuhu.and i just finished downloading v1 and v1.1...so this is different right? :'(
bdw.on this rom, no need nitrox? only the cttmod and fpsunlock?
Click to expand...
Click to collapse
I use almost the same but I use L speed mod instead of nitrox.
Will try first without L speed and then with to see any difference
plguzman said:
savergiggio, I would post an alert in the other ROM thread, so people stop downloading and flashing.
Click to expand...
Click to collapse
Yes thks
ojpd said:
When you say all Variants do you mean it also includes support for the Cat.6 G3???
Click to expand...
Click to collapse
Yes of course
jochem86 said:
I use almost the same but I use L speed mod instead of nitrox.
Will try first without L speed and then with to see any difference
Click to expand...
Click to collapse
Ok try
chacho_2me said:
huhuhu.and i just finished downloading v1 and v1.1...so this is different right? :'(
bdw.on this rom, no need nitrox? only the cttmod and fpsunlock?
Click to expand...
Click to collapse
Hahha sorry bro ... No don't need nitrox
savergiggio said:
Hahha sorry bro ... No don't need nitrox
Click to expand...
Click to collapse
only ctt mod and fpsunlock?
no worries dude...will just wait for v2 and download again
antutu is pretty weak
but battery life is amazing.
I'm pretty sure it doesn't take over 3 hours to upload a 900mb-1.3gb rom ?
v1.1 + Update very stable and good battery on 4G. Trying v1.2... do we need to do a Full Wipe for v1.2??
Please could you include the Call Recorder as well.
how much % left to upload?
do u use stock kernal in this rom?
ROM Info
Tekcafe Rom VS98549A: - Full stock UX4
- Marshmallow 6.0 VS985 49A- LGE build 17/10/2016
- Patch Security Android: 01/10/2016
- Updated new kernel from www.opensource.lge.com
- Fixed quadrooter vulnerabillities.
- Added Miniview
- Knockcode 3 tap
- Updated Xposed v86 in Aroma
- Updated SuperSU V2.78 in Aroma
- Add ViPER4Android FX Audio Mod in Aroma
- Call Recorder in Aroma
- Navibar 32 dpi in Aroma
Aroma Installer
Custom Google apps removing
Custom Xposed v86
Custom ViPER4Android FX Audio Mod
Custom Call Recorder
....
Contributors
Truongthevinh.
Source Code: opensource.lge.com
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: VS98549A
Stable Release Date: 2016-11-26
Download Here Please, Do not share mirror link or direct link[/B]
Link: Tekcafe VS98549A (Fshare)
Mirror Link: Tekcafe VS98549A
Old version
Video TEKCAFE ROM VS98549A
https://www.youtube.com/watch?v=3FxIk7x-CaE&index=3&list=PLP4s10nYXP7EnVAQfRbrbHJn25KqWYQDi
Credits
- @Cloudyfa
- @revo89
- @Chainfire
- XDA
Paypal Donate
Donations help A LOT during development, I can continue to developing your favorite rom
CHANGELOG
SUPPORT
None of the mirrors work
KittySparkles said:
None of the mirrors work
Click to expand...
Click to collapse
Try the links after you click on the video, click where it says show more.
KittySparkles said:
None of the mirrors work
Click to expand...
Click to collapse
Multiple Link in below this video
@Truongthevinh. I have been running this rom almost since you posted it, so far no problems. I had to flash the 24B and 35B bootstacks to get data to work. I cleaned flashed, setup rom, and then flashed the bootstacks. Also tried the 3.5 rom but since I am on Verizon I stuck with this 1. Thanks for all the effort.
Any screen shots? Does this have ux5.0? Interested in trying. How's the battery compared to android 7.1. Crdroid ROM has amazing battery life.
rippedwarrior69 said:
Any screen shots? Does this have ux5.0? Interested in trying. How's the battery compared to android 7.1. Crdroid ROM has amazing battery life.
Click to expand...
Click to collapse
Re: UX5.0, read the thread title ?
Screenshots are in the video.
I new it said ux4.0 I really enjoy 5.0. I like n&n ROM but data won't work correct and fulmics 4g works, but not 3g. Tekcafe ROM for all variants data won't work at all. So I thought I try this out. Is this similar to 47a.
rippedwarrior69 said:
I new it said ux4.0 I really enjoy 5.0. I like n&n ROM but data won't work correct and fulmics 4g works, but not 3g. Tekcafe ROM for all variants data won't work at all. So I thought I try this out. Is this similar to 47a.
Click to expand...
Click to collapse
Yes it is basically stock LG Verizon update, not much different from stock 48A. Could be debloated a bit more. Had to flash 35B bootstack after rom setup. So far so good, nothing fancy. Bat life seams the same as stock.
Lock screen settings doesnt work
Running pretty smooth. Signal seems to be stronger.
One issue though: None of the options in lock screen settings work ( e.g., swipe effect, wallpaper, shorcuts etc). Lock screen settings force closes.
I see something bizarre though. Under screen swipe effect I see "password visibility is disabled by server policy". Also, below weather animation option, I have an option called "Pin must be fewer than %d digits" and the description says "password must be fewer than %d characters. Under "lock time" and above "power key instant locks" I have an option called "pin must be at least %d digits"
rohitece06 said:
Running pretty smooth. Signal seems to be stronger.
One issue though: None of the options in lock screen settings work ( e.g., swipe effect, wallpaper, shorcuts etc). Lock screen settings force closes.
I see something bizarre though. Under screen swipe effect I see "password visibility is disabled by server policy". Also, below weather animation option, I have an option called "Pin must be fewer than %d digits" and the description says "password must be fewer than %d characters. Under "lock time" and above "power key instant locks" I have an option called "pin must be at least %d digits"
Click to expand...
Click to collapse
Say man, I was just having the same problem. I tried using Titanium to clear Lockscreen data, deleted some stuff from internal memory/preload and neither helped. I'm thinking it's broken. Do you have xposed installed? I do. I tried upgrading to v87 and the latest apk also. No luck. Other than that, I'm liking the rom. I haven't been on it long enough to know what kind of battery life I'll be getting but the screenlock not working is a nuisance. The stock wallpaper sucks IMO. Thanks for listening.
rob0809 said:
Say man, I was just having the same problem. I tried using Titanium to clear Lockscreen data, deleted some stuff from internal memory/preload and neither helped. I'm thinking it's broken. Do you have xposed installed? I do. I tried upgrading to v87 and the latest apk also. No luck. Other than that, I'm liking the rom. I haven't been on it long enough to know what kind of battery life I'll be getting but the screenlock not working is a nuisance. The stock wallpaper sucks IMO. Thanks for listening.
Click to expand...
Click to collapse
I was able to fix this by selecting a photo as my wallpaper and checking the box to set as lock screen wallpaper also. After that, I was able to change it to whatever I wanted using the lock screen menu in settings.
LOG: Lock screen settings FC
@truongthevinh
Here is log capture of lock screen settings FC. Go to line 725 to see the null-pointer exception.
Gonna check this out after work today. Thanks for the work.
Kickin it on my VS985
Someone Plz Fix the Lock Screen Issue.
Same Issue With My LG G3 VS985, Always Shows stopped working when i try to change Lock Screen,
Thank You.
DCG Mechanics said:
Someone Plz Fix the Lock Screen Issue.
Same Issue With My LG G3 VS985, Always Shows stopped working when i try to change Lock Screen,
Thank You.
Click to expand...
Click to collapse
Screen lock problem: extract 48A KDZ or 47A KDZ
System/app/LGLockScreenSetting and LGLockScreenSetting_Provuder to replace and Modify permissions
my English is not very good. I hope it could help you
zandouxianshidian said:
Screen lock problem: extract 48A KDZ or 47A KDZ
System/app/LGLockScreenSetting and LGLockScreenSetting_Provuder to replace and Modify permissions
my English is not very good. I hope it could help you
Click to expand...
Click to collapse
I Have This KDZ File :- VS98547A_01_0314_ARB01
how to open this file ? i tried 7zip but it is unable to open .
thanx for help.
DCG Mechanics said:
I Have This KDZ File :- VS98547A_01_0314_ARB01
how to open this file ? i tried 7zip but it is unable to open .
thanx for help.
Click to expand...
Click to collapse
WindowsLGFirmwareExtract v1.2.5.0, found on XDA.
Or take the file from the system.img in @xdabbeb 's 47A firmware ROM in this section.
Introduction
This is a stock-based rom I initially created for myself, now I'm sharing it because it can be handy also to some other people.
I only made some small modifications and added some useful features from our devs
Click to expand...
Click to collapse
Features
based on latest NPN25.137-67 firmware
deodexed
zipaligned
debloated (removed some gapps, you can download them from play store)
rooted with magisk
battery percentage mod (on the left of the battery)
3MinitClock (customisable clock mod in statusbar)
removed ime switcher on navbar
tinted navbar (where the app allows it)
all rotations enabled
@defcomg mods for camera (less aggressive sharpening | noise reduction)
led support (thanks to @vache)
debug usb icon and notification removed
cool navbar icons
Click to expand...
Click to collapse
Installation instructions
Reboot in recovery
Wipe data, cache and dalvik
Install zip
Reboot
To have root you must update magisk app (currently not available in play store)
Click to expand...
Click to collapse
Issues
Moto Action "flip to mute" is not working
MagiskHide and modules not working properly
Click to expand...
Click to collapse
Changelog
Last changlog:
Code:
Stoneware v.67 - 05/06/2017
[NOTE] Initial build
Old changlogs:
Code:
Empty
Click to expand...
Click to collapse
Downloads
Download
Stoneware v.67 [675 MB]
Mods
[VRT]Remove custom battery percentage
[VRT]Remove clock from statusbar
Right stock clock in statusbar + battery percentage
[VRT]Right custom clock in statusbar
[VRT]Left custom clock in statusbar
[VRT]Center custom clock in statusbar
Disable dynamic navbar
Disable led
Click to expand...
Click to collapse
Thanks To/Credits
@vache
@defcomg
@GtrCraft
@SuperR for his kitchen
@gharrington for 3MinitClock
@Erhany for battery %
@Ticklefish
@motomotomotoG
@RXS MoonBreakers
@sharan.nyn
Click to expand...
Click to collapse
XDA:DevDB Information
Stoneware, ROM for the Moto G5 Plus
Contributors
eskamhl
ROM OS Version: 7.x Nougat
Based On: Stock firmware
Version Information
Status: Stable
Created 2017-06-04
Last Updated 2017-06-04
Reserved
Thank you
Sent from my Moto G (5) Plus using Tapatalk
eskamhl said:
Introduction
Features
Installation instructions
Changelog
Downloads
Thanks To/Credits
XDA:DevDB Information
Stoneware, ROM for the Moto G5 Plus
Contributors
eskamhl
ROM OS Version: 7.x Nougat
Based On: Stock firmware
Version Information
Status: Stable
Created 2017-06-04
Last Updated 2017-06-04
Click to expand...
Click to collapse
screenshots please.
can u add dolby atmos by default
and also good camera like google camera or lenovo snap it which has features like blur etc.
and also add substratum theme manager by default
and how is the camera quality
vinay7 said:
screenshots please.
can u add dolby atmos by default
and also good camera like google camera or lenovo snap it which has features like blur etc.
and also add substratum theme manager by default
and how is the camera quality
Click to expand...
Click to collapse
Lots of thread for Atmos installation already .
Including it in rom deprives other users of flexibility .
Not recommended for XT1687 retus correct?
eskamhl said:
Introduction
Features
Installation instructions
Changelog
Downloads
Thanks To/Credits
XDA:DevDB Information
Stoneware, ROM for the Moto G5 Plus
Contributors
eskamhl
ROM OS Version: 7.x Nougat
Based On: Stock firmware
Version Information
Status: Stable
Created 2017-06-04
Last Updated 2017-06-04
Click to expand...
Click to collapse
include supersu. works fine with me
vinay7 said:
screenshots please.
can u add dolby atmos by default
and also good camera like google camera or lenovo snap it which has features like blur etc.
and also add substratum theme manager by default
and how is the camera quality
Click to expand...
Click to collapse
You can find some screenshots in "Screenshots" menu, as always at the top of a devdb thread.
Everyone has his hown preference about audio mods and in addition I'm not using any of them so I don't think I'll include one of those
The same is valid for substratum ( not everyone is using it, and I'm not ) and camera.
The camera quality is a little bit better than stock firmware thanks to defcomg and his modified libs.
aki_007 said:
Lots of thread for Atmos installation already .
Including it in rom deprives other users of flexibility .
Click to expand...
Click to collapse
I agree
atrac17 said:
Not recommended for XT1687 retus correct?
Click to expand...
Click to collapse
Honestly I don't know, but since it's from retin firmware and I'm using it on a xt1685 device I would give it a try.
Make a nandroid backup before doing anything, in particular oem partition ( the installer touches /system /boot and /oem partitions, nothing more )
eswarvf said:
include supersu. works fine with me
Click to expand...
Click to collapse
There's Magisk already, it has more options than supersu at this moment
eskamhl said:
Honestly I don't know, but since it's from retin firmware and I'm using it on a xt1685 device I would give it a try.
Make a nandroid backup before doing anything, in particular oem partition ( the installer touches /system /boot and /oem partitions, nothing more )
Click to expand...
Click to collapse
I already did a nandroid and have it up and running ?. Few questions, how do I disable the battery percentage mod and center clock mod? I already disabled 3MinitClock.
These are just features I don't use and disable the icons with ui tuner. Also, the LED support is for notifications when the screen is off only? Is there anyway to enable it while the screen is on?
I checked your thread for the mods to see if there was a way to remove them as well. Are they built into the system ui?
Thanks for this!
Does Moto Display work with this rom? I've been waiting very patiently for a debloated stock rom!
atrac17 said:
I already did a nandroid and have it up and running . Few questions, how do I disable the battery percentage mod and center clock mod? I already disabled 3MinitClock.
These are just features I don't use and disable the icons with ui tuner. Also, the LED support is for notifications when the screen is off only? Is there anyway to enable it while the screen is on?
I checked your thread for the mods to see if there was a way to remove them as well. Are they built into the system ui?
Thanks for this!
Click to expand...
Click to collapse
For the battery percentage mod I have to make at least a VRTheme, will do it tomorrow.
About the clock you can put a "space" in 3MinitClock app and it should be fine
Edit: I just noticed there's an option to hide clock inside 3MinitClock app, it's just a matter of fixing the bug described here below.
roygbiv859 said:
Does Moto Display work with this rom? I've been waiting very patiently for a debloated stock rom!
Click to expand...
Click to collapse
Works as in stock rom :good:
Hello and thanks for the stock rom! Looks like this is going to become my daily!
Only problem I've noticed so far is the 3minit clock mod.. After changing it to right align, it is fine until you pull down the status bar and snap it back, then you have two clocks! One in the middle, one on the right
Justin933 said:
Hello and thanks for the stock rom! Looks like this is going to become my daily!
Only problem I've noticed so far is the 3minit clock mod.. After changing it to right align, it is fine until you pull down the status bar and snap it back, then you have two clocks! One in the middle, one on the right
Click to expand...
Click to collapse
Temp fix I just set the clock to center align and I only have one clock now.
Justin933 said:
Temp fix I just set the clock to center align and I only have one clock now.
Click to expand...
Click to collapse
You're definitely right [emoji15]
There are some problems with the clock positioned at the center, this evening I'll look at the code ( I'm using the centered clock, I just checked it was moving correctly and nothing more ).
In addition I have to admit there are some issues with magisk, I'm not even passing basic integrity.
It seems like magisk is mounted in ro mode, uninstalling a reinstalling did not fix the problem so I think we must wait a patched/custom kernel.
Thanks a lot for this rom its my daily driver, however I wanted to know whether its possible to remove the battery percentage besides the battery icon ? http://cloud.tapatalk.com/s/59354a69e4f20/_20170605_174058.JPG
Sent from my Moto G (5) Plus using Tapatalk
pls check the wifi and cmera
eswarvf said:
include supersu. works fine with me
Click to expand...
Click to collapse
pls check the camera and wifi..
eskamhl said:
You're definitely right [emoji15]
There are some problems with the clock positioned at the center, this evening I'll look at the code ( I'm using the centered clock, I just checked it was moving correctly and nothing more ).
In addition I have to admit there are some issues with magisk, I'm not even passing basic integrity.
It seems like magisk is mounted in ro mode, uninstalling a reinstalling did not fix the problem so I think we must wait a patched/custom kernel.
Click to expand...
Click to collapse
I gave this a try since I really like debloated stock ROMs. Couldn't get the status bar clock to stay how I'd set it, then tried hiding it but it would reappear anyway, and same after disabling it as though some part of it was burned-in to the set up. Also the fonts couldn't match the bolder font style of the status bar and it looked too dim/faint.
Magisk, as you're saying too now, was the real game-stopper because even though it said I'm rooted I was still getting ads despite using AdAway. Tried another fresh install (wiped, reinstalled ROM) this time not updating Magisk Manager (uninstalled it) then trying SU 2.82 which seemed to work much better rooting-wise, but then had the camera & wifi issues because the .67 kernel isn't modified yet.
So I had to go back to my .33 backup but hope you'll keep at this when we get a patched kernel for the upgraded versions. I love the boot animation which really fits the ROM name and perfectly matches the black Moto boot logo I'm using. Could you possibly please extract that so we can use it on our old set ups, or if available separately provide a link? Again, many thanks for your efforts on this.
Dahenjo said:
I gave this a try since I really like debloated stock ROMs. Couldn't get the status bar clock to stay how I'd set it, then tried hiding it but it would reappear anyway, and same after disabling it as though some part of it was burned-in to the set up. Also the fonts couldn't match the bolder font style of the status bar and it looked too dim/faint.
Magisk, as you're saying too now, was the real game-stopper because even though it said I'm rooted I was still getting ads despite using AdAway. Tried another fresh install (wiped, reinstalled ROM) this time not updating Magisk Manager (uninstalled it) then trying SU 2.82 which seemed to work much better rooting-wise, but then had the camera & wifi issues because the .67 kernel isn't modified yet.
So I had to go back to my .33 backup but hope you'll keep at this when we get a patched kernel for the upgraded versions. I love the boot animation which really fits the ROM name and perfectly matches the black Moto boot logo I'm using. Could you possibly please extract that so we can use it on our old set ups, or if available separately provide a link? Again, many thanks for your efforts on this.
Click to expand...
Click to collapse
Just extract it from the ROM zip. Which u have downloaded from /system/media. There will be boot animation.zip. Copy this and paste it in your current ROM. Set correct permissions.(644). That's it!
sharan.nyn said:
Just extract it from the ROM zip. Which u have downloaded from /system/media. There will be boot animation.zip. Copy this and paste it in your current ROM. Set correct permissions.(644). That's it!
Click to expand...
Click to collapse
Thanks, I wasn't sure if it needed other file(s) than just the bootanimation.zip, but it worked fine. I guess this new one is called 'PiTwistedGeometry'.
@eskamhl I've switched over to .35 temporarily. For Magisk, it isn't working properly for several features. This ROM is really sweet. I also noticed the clock issue, but since I'm removing it, the "space" feature did work. I also had double battery % on lockscreen.
Introduction
This is a stock based De-bloated ROM made solely to the purpose of removing bloatware and enjoying a smooth experience... This is inspired from Stoneware by @eskamhl with but less mods
Click to expand...
Click to collapse
Features
Debloated
Deodexed
used mod by @defcomg to improve camera performance
Zip-aligned to improve performance
Click to expand...
Click to collapse
Download
Download Version 2 with November Patch
Download V1
Credits
@vache
@eskamhl
@Alihasan
@Gtrcraft
@defcomg
Click to expand...
Click to collapse
Feel free to hit the thanks button it keeps me motivated :good::good:
XDA:DevDB Information
[ROM][7.0][Stock] Debloated November Patch, ROM for the Moto G5 Plus
Contributors
sandy108, sandy108
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Stock
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2017-06-11
Created 2017-06-10
Last Updated 2018-01-24
Hello and thank you! I see this is the India version, will it work on 64gb US version?
.67?
Many thanks for making this. It's running fine on my US variant, has March security update so must be based on v.67. It's very debloated (love it!) and not rooted so we can choose what we want. I'm using SuperSU 2.82 with V4 extended kernel, have all my apps set up & working with no errors or problems at all, and it's plenty fast & responsive. Haven't explored every little thing yet, and will need time to see how battery life is, but so far this seems great.
EDIT: having camera error on V4 which isn't meant for .67, so using ElementalX v2.00 kernel & all is working fine.
I have to say that this is amazing because it has a notification LED that doesn't require the phone to be plugged into a charger. Thanks for this ROM
Running flawlessly on 64GB US version; XT1687
Flashable throught TWRP?
Athus said:
Hello and thank you! I see this is the India version, will it work on 64gb US version?
Click to expand...
Click to collapse
I think so.. just flash and let me know make sure to take a nandroid backup please
bornlivedie said:
.67?
Click to expand...
Click to collapse
Yes look at the screenshots
Dahenjo said:
Many thanks for making this. It's running fine on my US variant, has March security update so must be based on v.67. It's very debloated (love it!) and not rooted so we can choose what we want. I'm using SuperSU 2.82 with V4 extended kernel, have all my apps set up & working with no errors or problems at all, and it's plenty fast & responsive. Haven't explored every little thing yet, and will need time to see how battery life is, but so far this seems great.
Click to expand...
Click to collapse
Looks like this is made exactly for the likes you .. glad to here you like... Be sure to hit the thanks button
sticktornado said:
I have to say that this is amazing because it has a notification LED that doesn't require the phone to be plugged into a charger. Thanks for this ROM
Running flawlessly on 64GB US version; XT1687
Click to expand...
Click to collapse
Glad to hear you guys like it.. Make sure to hit ur the thanks button
MOTOGrandMASTER said:
Flashable throught TWRP?
Click to expand...
Click to collapse
Yes !... Obviously
Flashed it and some stuff works versus the Stoneware version. But A.R.I.S.E isn't installing properly at all; some Magisk modules also didn't work and most Moto gestures not working either. ? Not sure why A.R.I.S.E won't work...
Dirty flashed here!!! Working great in 2GB RAM Brazilian Variant!!! Thanks to fix the navbar when i on keyboard on One Button Nav !! I seeing the apps oppening even faster on this Stock!! Using ElementalX Kernel and SuperSU 2.82 , God bless you!!! :victory: :laugh:
Cannot install busybox on this rom. Any idea why?
Anyone get magisk hide to work.
Sent from my Moto G (5) Plus using Tapatalk
twcobra said:
Anyone get magisk hide to work.
Sent from my Moto G (5) Plus using Tapatalk
Click to expand...
Click to collapse
Nope
Dahenjo said:
Many thanks for making this. It's running fine on my US variant, has March security update so must be based on v.67. It's very debloated (love it!) and not rooted so we can choose what we want. I'm using SuperSU 2.82 with V4 extended kernel, have all my apps set up & working with no errors or problems at all, and it's plenty fast & responsive. Haven't explored every little thing yet, and will need time to see how battery life is, but so far this seems great.
Click to expand...
Click to collapse
V4 extended kernel?? It is not yet supported for v67. Camera and WiFi would be broken for u.
sharan.nyn said:
V4 extended kernel?? It is not yet supported for v67. Camera and WiFi would be broken for u.
Click to expand...
Click to collapse
I forgot about that at first, but amazingly it seemed to work fine including wifi & camera. I've since changed to EX 2.00 kernel but can't really see any difference so far (but only one day).
EDIT: checked V4 again (had backup) and now camera doesn't work (restart error) but wifi still does, thought camera worked before but maybe forgot to check. Anyway, don't use V4 with this .67 ROM.
Don't know if this might be related, but I'm not using the modified boot or wlan_custom anymore for rooting, just install SuperSU followed by one of the extended kernels, and in that order or wifi will be broken.
Dahenjo said:
Don't know if this might be related, but I'm not using the modified boot or wlan_custom anymore for rooting, just install SuperSU followed by one of the extended kernels, and in that order or wifi will be broken.
Click to expand...
Click to collapse
Just the latest version of SuperSU from the dev's website download?
critofur said:
Just the latest version of SuperSU from the dev's website download?
Click to expand...
Click to collapse
I'm currently using this one from 5/28:
https://download.chainfire.eu/1113/SuperSU/UPDATE-SuperSU-v2.82-20170528234214.zip