what will happen if i give max nd min both frequency to 1.6ghz by overclocking on zd kernel??
Maybe the ans is it will work like 1.6 ghz.
But when i do it any kernel controler as zd,thunderzap,trickstar,franco my phone just work on 1ghz only nd in deep sleep when in no use.
Some1 help me out please?
how to get the best outta it??
I am using this kernel but I can't enable swap.
vampirechamp said:
I am using this kernel but I can't enable swap.
Click to expand...
Click to collapse
Maybe this kernel doesn't support swap
BatDroid said:
what will happen if i give max nd min both frequency to 1.6ghz by overclocking on zd kernel??
Maybe the ans is it will work like 1.6 ghz.
But when i do it any kernel controler as zd,thunderzap,trickstar,franco my phone just work on 1ghz only nd in deep sleep when in no use.
Some1 help me out please?
how to get the best outta it??
Click to expand...
Click to collapse
Having the same problem.....found any solution?
Sansky12 said:
Having the same problem.....found any solution?
Click to expand...
Click to collapse
ya..
flash r10 kernel by psych.half
BatDroid said:
ya..
flash r10 kernel by psych.half
Click to expand...
Click to collapse
But in the thread it says its for cm11...and im on stock.
Also i wanna share something:
I managed to clock the kernel on 1600mhz....
But then when i checked states..all the time kernel remained on 1000mhz. see attachment. Also the cpu always showed offline...and that's funny as our phone got only 1 core and if that too becomes offline...how the hell will then our phone be working?
Then i reverted back to stock kernel....and there too cpu0 was seen offline....is that even possible?
Hope this helps you in figuring out the problem.:fingers-crossed:
Sansky12 said:
But in the thread it says its for cm11...and im on stock.
Click to expand...
Click to collapse
r10 is for all roms
flash it using a cwm recovery
Sansky12 said:
Also i wanna share something:
I managed to clock the kernel on 1600mhz....
But then when i checked states..all the time kernel remained on 1000mhz. see attachment. Also the cpu always showed offline...and that's funny as our phone got only 1 core and if that too becomes offline...how the hell will then our phone be working?
Then i reverted back to stock kernel....and there too cpu0 was seen offline....is that even possible?
Hope this helps you in figuring out the problem.:fingers-crossed:
Click to expand...
Click to collapse
that's a broken cpu_freq driver.
Working one is here
In the r10 thread i saw something about enabling/disabling camera.....could you explain it please..?
Sansky12 said:
In the r10 thread i saw something about enabling/disabling camera.....could you explain it please..?
Click to expand...
Click to collapse
disabling memory allocation for cam gives u a little more free memory.
Not necessary
BatDroid said:
that's a broken cpu_freq driver.
Working one is here
Click to expand...
Click to collapse
The download link's broken.....in the thread...can u provide another?....i'm using uc mini
Sansky12 said:
The download link's broken.....in the thread...can u provide another?....i'm using uc mini
Click to expand...
Click to collapse
disable speedMode or use a browser(ucb) js enabled
That kernel didn't boot my device....
although there was boot sound but there wasn't any boot animation.....just a black screen....and It just stuck in that black screen.....
I've moved on to cm11 ....irritated by stock.....
thanks for your suggestions anyway
Sansky12 said:
That kernel didn't boot my device....
although there was boot sound but there wasn't any boot animation.....just a black screen....and It just stuck in that black screen.....
I've moved on to cm11 ....irritated by stock.....
thanks for your suggestions anyway
Click to expand...
Click to collapse
don't flash this kernel on older firmwares
Related
Hi everyone,
I already install Devoid.Franco and his kernel, but i dont know if this kernel has the Touch Fix like Mik_os' kernel touch fix.
I read all the initial post from franco but i cant find any information about it.
thx
it does have the touch fix. but some ppl have problems with tht kernel.
its for u to make the choice
ccdreadcc said:
it does have the touch fix. but some ppl have problems with tht kernel.
its for u to make the choice
Click to expand...
Click to collapse
Thx for your answer but which kernel has the best soluction for the touch bug? some times i still feeling the touch bug.
weird... wats ur overclock value?
im using franokernel v15 and its smooth as butter. absolutely no lags...
ccdreadcc said:
weird... wats ur overclock value?
im using franokernel v15 and its smooth as butter. absolutely no lags...
Click to expand...
Click to collapse
I am using SetCpu and it say 600 mhz, I thought Devoid.Franco was 729, i download No-Frills and set it to 480/729 with SMARTASS, im gonna see what happens now.
thx
interactive 480/768 is also good
ccdreadcc said:
interactive 480/768 is also good
Click to expand...
Click to collapse
Tried it on my optimus one....Screen goes off. Not stable Got stock 2.2.2
Removed....
Hello, unlocked the bootloader!
But when I connect in fastboot blue light is lit but there is nothing to me!
Am I doing something wrong?
thank you
Want to test out this kernel!
I come from x10 mini, but the mode of Flash seems to be different!
Try fastboot -i 0xfce flash boot boot.img; did you installed the fastboot driver?
Sent from my SK17i using XDA App
hi kamarush
thank you for your working
i have wifi issue so i cant connect to any wifi network so please help me and thanks alot
with my regards
abd-hamdan said:
hi kamarush
thank you for your working
i have wifi issue so i cant connect to any wifi network so please help me and thanks alot
with my regards
Click to expand...
Click to collapse
Install in cwm the wlan_smultron_signed.zip
kamarush said:
Install in cwm the wlan_smultron_signed.zip
Click to expand...
Click to collapse
i install it but no response
im not interested in custom kernel at the moment, but im curious, to those who succesfully flashed the kernel, can you overclock up to 2ghz using setcpu?
Seriously it does!
Confidence, tests can tell!
KRsH i also installed the update zip but when i open my wifi and try to connect it stucks at Obtaining Ip adress and then it goes from the beginning
zousoum96 said:
KRsH i also installed the update zip but when i open my wifi and try to connect it stucks at Obtaining Ip adress and then it goes from the beginning
Click to expand...
Click to collapse
We're investigating now the problem
I've posted the fixed kernel and wlan modules.
Please test it.
works perfectly for me!
Works for me too but there is no overclock and it isnt prerooted
zousoum96 said:
Works for me too but there is no overclock and it isnt prerooted
Click to expand...
Click to collapse
??
Use setcpu.
zousoum96 said:
Works for me too but there is no overclock and it isnt prerooted
Click to expand...
Click to collapse
Hello, I've been testing this and I can tell you that it works perfectly!
Can I use all the data as described in the first post!
Note: You should also ensure that you have an ST15 and an SK17 not!
you need to OC setcpu!
Everything works fine. Sorry for the overclock misinformation i thought it was preoverclocked ar 2Ghz.
2251 quadrant.. not bad for this little sucker
http://imageshack.us/photo/my-images/832/screenshot201111202148.jpg
ondemand 122.88mhz<---->1708.8mhz
2ghz <-freeze. think 1800mhz is max on my device
-- update --
Changelog:
V2.0
- Added cpu governors
Lagfree
Brazilianwax
Smoothass
- Support for voice call recording
- Added I/O Scheduler
sio
- Tiny RCU
- SLQB memory allocator
is there any possible of flashing this kernal without unlocking bootloader and fast reboot
but i rooted phone and installed cwm on phone..........
Shivatink said:
is there any possible of flashing this kernal without unlocking bootloader and fast reboot
but i rooted phone and installed cwm on phone..........
Click to expand...
Click to collapse
No friend, no way!
Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Wow nice one may i request a GPU overclock please?
snoory said:
Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Click to expand...
Click to collapse
thx, but what is the trick for reaching recovery?
snoory said:
Here's my first costom kernel img. For all the brave out there
May suffer from increased battery drain. Feedback welcome. Not there yet: alternative governors.
Click to expand...
Click to collapse
Thanks...
Just test it out, my Quadrant raise from 14xx (1.4GHz) to 15xx (1.6GHz) not bad..
FYI, I'm on MIUI v4 ALPHA 1 SEMC
its not include recovery. only kernel
sirkay said:
its not include recovery. only kernel
Click to expand...
Click to collapse
is it any tutorial for flashing recovery after kernel?or how to merge?
funiewski said:
is it any tutorial for flashing recovery after kernel?or how to merge?
Click to expand...
Click to collapse
here tutorial by idareyoutoclickthis
How to install CWM
Download this then extract
Make sure you enabled USB debugging, and also you need to set Screen timeout to 10 minutes so you don't miss the superuser promt
Run install-cwm1.cmd from the folder
Follow screen on screen instruction, reboot.
Click to expand...
Click to collapse
to merge you need bootimgtools
does it have some kind of side effect when we clock the phone until 1.6 Ghz??
i've flashed this kernel...it is good that the game run smoother with it...
but then i feel like this is like too fast until the animation seems to be a bit weird...
didn't check yet for the battery drain...
i've used the sirkay kernel and it saved me a lot of battery time...
albagani said:
does it have some kind of side effect when we clock the phone until 1.6 Ghz??
i've flashed this kernel...it is good that the game run smoother with it...
but then i feel like this is like too fast until the animation seems to be a bit weird...
didn't check yet for the battery drain...
i've used the sirkay kernel and it saved me a lot of battery time...
Click to expand...
Click to collapse
it depends. sometime your phone will start warm bcos your engine running beyond its normal speed. all machine have their own capabilities.
for me, normally will set speed between 1.2ghz to 1.4ghz. but i prefer 1.2ghz, dont wana force it to much
btw, its not my kernel. i added some script into ramdisk and compiled with other(s) kernel. thats all
unlocked bootloader is a must right?
Right.
Sent from my Xperia Ray using xda app-developers app
Hi
I have xperia neo L
I bought it 2 months ago
I have to charge it 2 times a day
Is the problem with the phone or the battery and what should I do?
HEY!
armenian black eye said:
Hi
I have xperia neo L
I bought it 2 months ago
I have to charge it 2 times a day
Is the problem with the phone or the battery and what should I do?
Click to expand...
Click to collapse
What Kernel,Rom u using?
what r u ur OC settings?
and btw hav u tried different kernels and RoMs?
Important-
Be really carefull when overclocking(as mentioned in many places)
cause ur battery will have more strain.
and because of that u will lose a lot of Ions/cells(science thing )
and that will decrease ur battery life very badly.
My EXPERIENCE
Please Click 'Thanks' If I helped
my kernel version is
3.6.32.9-perf
[email protected] #1
Click to expand...
Click to collapse
I don't know which rom I am using but it just looks like this one
[rom]arconium ics 5.0 port [neo/ l/v ] 2 november
Click to expand...
Click to collapse
and no i haven't tried to different kernels or roms yet
and for OC settings i don't know if this is what u talking about
Max: 1024MHz
Min : 245MHz
armenian black eye said:
my kernel version is
I don't know which rom I am using but it just looks like this one
and no i haven't tried to different kernels or roms yet
and for OC settings i don't know if this is what u talking about
Max: 1024MHz
Min : 245MHz
Click to expand...
Click to collapse
do this things
install wakelock detector to see which app is causing wakelocks and draining battery
change the governor to smartassh3 if your kernel supports it
in your post it's your kernel version not the name of the kernel
avinashrocks1990 said:
do this things
install wakelock detector to see which app is causing wakelocks and draining battery
change the governor to smartassh3 if your kernel supports it
in your post it's your kernel version not the name of the kernel
Click to expand...
Click to collapse
every thing is normal in the wakelock detector
and the kernel doesn't support this governer
??
armenian black eye said:
my kernel version is
I don't know which rom I am using but it just looks like this one
and no i haven't tried to different kernels or roms yet
and for OC settings i don't know if this is what u talking about
Max: 1024MHz
Min : 245MHz
Click to expand...
Click to collapse
ur clock speeds are fine,
i suggest u try ROMs like Ultimate HD,Revolution ICS ,etc
if uve unlocked bootloader . u can try even more Roms and kernels.
and again, if uve unlocked - try suave kernel , fusion kernel,etc
and ya u should try wakelock
or
just simply see battery usage in settings(if u dint see)
and keep an eye on the governor u select
Please Click 'Thanks' if i helped
You should try following:
1. Changing CPU governor (e.g. switch to ondemand from performance, or to powersave, sometimes those default governors can be buggy, so try alternative like smartass)
2. Remove widgets from homescreen that you don't use, especially weather widget.
3. Turn off sync when you don't need it.
4. Change your brightness. If it is on max set it to half or automatic, you can turn it completely off, but then screen is unusable on daylight (my experience)
5. Turn off wifi or data when you don't use it.
You can also do some tweaking in easier way using Pimp My ROM from Play Store. If that still doesn't help, try different kernel.
armenian black eye said:
every thing is normal in the wakelock detector
and the kernel doesn't support this governer
??
Click to expand...
Click to collapse
then only two things left
your battery needs calibration
or
your battery's life is over
srik9999 said:
ur clock speeds are fine,
i suggest u try ROMs like Ultimate HD,Revolution ICS ,etc
if uve unlocked bootloader . u can try even more Roms and kernels.
and again, if uve unlocked - try suave kernel , fusion kernel,etc
and ya u should try wakelock
or
just simply see battery usage in settings(if u dint see)
and keep an eye on the governor u select
Please Click 'Thanks' if i helped
Click to expand...
Click to collapse
i installed revolution ics rom but the mobile wouldn't turn on
It gives me the sony logo the reboot again
What should i do?
armenian black eye said:
i installed revolution ics rom but the mobile wouldn't turn on
It gives me the sony logo the reboot again
What should i do?
Click to expand...
Click to collapse
if you are neo user flash neo v ftf to increase system partition before installing huge custom roms ..... otherwise bootloops
deccen90 said:
if you are neo user flash neo v ftf to increase system partition before installing huge custom roms ..... otherwise bootloops
Click to expand...
Click to collapse
i am neo l user
What is boot loop
armenian black eye said:
i am neo l user
What is boot loop
Click to expand...
Click to collapse
Stuck at Sony logo or ROM logo..
full wipe before installing new ROM and also use compatible kernel
deccen90 said:
Stuck at Sony logo or ROM logo..
full wipe before installing new ROM and also use compatible kernel
Click to expand...
Click to collapse
so now i just have to install a compatible kernel?
armenian black eye said:
so now i just have to install a compatible kernel?
Click to expand...
Click to collapse
yes
you should always install a cmpatible kernel
always read op before flashing anything
avinashrocks1990 said:
then only two things left
your battery needs calibration
or
your battery's life is over
Click to expand...
Click to collapse
There is no such thing as 'battery calibration'!!! it's a myth, placebo, or whatever You call it, and You, avinash, should know it
zadrozny91 said:
There is no such thing as 'battery calibration'!!! it's a myth, placebo, or whatever You call it, and You, avinash, should know it
Click to expand...
Click to collapse
i know it but i don't know why some people report that it works
i know battery stats are reset at full charge
but i think manually resetting may help if automatic resetting is not working for some reason
and in the end what's the harm in trying
Is there a kernel for OC on stock rom ?
Or at least without the OC, but with tweaks.
MEGAX91 said:
Is there a kernel for OC on stock rom ?
Or at least without the OC, but with tweaks.
Click to expand...
Click to collapse
This should be in the Q & A section
I don't think that too many people are worried about OC the device as it is quire fast. One of krabappel's kernel has OC abilities I think, but not sure if it will boot a stock rom...
EDIT:
It is only for custom 4.4 roms
MEGAX91 said:
Is there a kernel for OC on stock rom ?
Or at least without the OC, but with tweaks.
Click to expand...
Click to collapse
I've always been keen to OC' my devices. However like Blue said, I've never felt the need to clock the Ultra higher. You could try apps from the playstore that modify the kernel at a source level. ummm I think tegrak does that?
https://play.google.com/store/apps/details?id=com.tegrak.overclock
hamdogg said:
I've always been keen to OC' my devices. However like Blue said, I've never felt the need to clock the Ultra higher. You could try apps from the playstore that modify the kernel at a source level. ummm I think tegrak does that?
https://play.google.com/store/apps/details?id=com.tegrak.overclock
Click to expand...
Click to collapse
Will they stop a locked BL from booting?
blueether said:
Will they stop a locked BL from booting?
Click to expand...
Click to collapse
hmmm... good point. In theory it should stuff up a locked bootLoader... Never tried it on a Sony device.
hamdogg said:
I've always been keen to OC' my devices. However like Blue said, I've never felt the need to clock the Ultra higher. You could try apps from the playstore that modify the kernel at a source level. ummm I think tegrak does that?
https://play.google.com/store/apps/details?id=com.tegrak.overclock
Click to expand...
Click to collapse
Well, I want to OC mine for sure..you know when you OC once, there is no turning back no need for a reason..you just gotta do it
:laugh:
BTW Tegrak does not work with our device...at least not with the sony stock kernels.
shaolin95 said:
Well, I want to OC mine for sure..you know when you OC once, there is no turning back no need for a reason..you just gotta do it
:laugh:
BTW Tegrak does not work with our device...at least not with the sony stock kernels.
Click to expand...
Click to collapse
Exactly ، Tegrak does not work with stock kernel.
i wonder why there is no custom kernel for stock rom !!!