[ROM] [Unofficial] [Stable] [6.0.1] CyanogenMod 13.0 for trltespr - Sprint Galaxy Note 4 Original Android Development

Disclaimer
This ROM is constantly under development, and the file(s) provided are a snapshot at a particular point in time. There are no guarantees that they will work. On the other hand, it's quite possible that the file(s) here may make your phone explode, make your boy/girlfriend leave for another country, cause you immense financial loss or other horrible things. The CyanogenMod team and I are not responsible for any of it.
***THIS ROM ONLY WORKS WITH OK1 OR PREVIOUS BOOTLOADERS/MODEMS***
Reporting Bugs
This thread is for development discussion of this ROM only. If you have encountered a bug, please try to reproduce it with a CLEAN FLASH without any other apps/data (unless specifically needed to reproduce the bug).
Valid bug reports will contain the items below as a minimum:
Steps to reproduce error
Phone firmware (Baseband) - (i.e. NK2, OB7, OG5) - You can find this by going to Settings->About phone and looking for Baseband version
Version of CyanogenMod (i.e. 2015XXXX-UNOFFICIAL)
Filename / version of gapps used if the issue may be related to gapps
Logcat - CatLog is a good Android app to save logs with. You can attach to your XDA post if you desire or use a service like PasteBin.
Installation Instructions
MAKE SURE YOU ARE ON OG5 OR GREATER BASEBAND!!!!
Use TWRP!
Do a nandroid! What happens when the ROM doesn't work?? You'll be stuck, that's what!
Factory Reset if this is your first flash of CyanogenMod 13.0! (Wipe Cache/Dalvik/Data)
Install the latest nightly ROM ZIP file!
Install your favorite gapps (Slim Marshmallow Gapps is the only version I consider at this point in testing)
What Works / Doesn't
Working: Mobile Data
Working: WiFi
Working: Camera / Camcorder
Working: Calls / SMS / MMS
Working: GPS
Working: Bluetooth
Working: External SD, including formatting
Working: S-Pen
[*]Not Working: Bluetooth (Voice Calls) -- Needs more testing and more logs (fixed in 01/22/16 build)
[*]Not Working: APN Access (even if you make an Activity shortcut) (fixed in 02/04/16 build)
[*]Not Working: Exfat formatted external SD cards (fixed in 12/16/15 build)
Not Tested: Anything not mentioned above.
Found Bugs
Camera takes a long time to launch the first time each boot (before asking for location permissions, if first time)
Camcorder crashes if you use UHD 4k resolution -- 1080p works fine.
Browser crashes when downloading files -- use Chrome instead or edit Browser's permissions to allow "Storage".
Brightness gets wonky - when you let the phone dim, it may not go back to normal brightness. Press power to turn off screen and press again to fix the brightness and turn screen back on. Seems to be resolved by turning off Ambient Display / Daydream.
Automatic time zones may not work properly. You can force a timezone in Settings->Date and Time
Sometimes calls will show up as "Unknown" in the call log.
Cannot use WiFi Hotspot in 5GHz Mode
Camera freezes when you use the flash -- use alternate camera from Play Store
Download
AFH
Sources
Device Tree
Common Tree
Kernel
To compile, you will need a proper build environment. You will also need a stock OG5 or OK1 ROM to extract the proprietary files from. These builds also use the Adreno blobs from "shamu" (here). The shamu blobs Adreno blobs replace any blobs from the OG5/OK1 ROM.
THIS THREAD IS NOT FOR BUILD ENVIRONMENT OR COMPILING DISCUSSIONS
Please be aware that cm-13.0 is in a HUGE state of flux. You should NOT depend on this as your primary ROM. I cannot guarantee that everything (or anything) will work.
If you cannot post a helpful message or a detailed bug report, please do not post at all.
XDA:DevDB Information
CyanogenMod 13.0 for trltespr, ROM for the Sprint Samsung Galaxy Note 4
Contributors
nivron, drcrimzon, fattire
Source Code: https://github.com/fat-tire/android_kernel_samsung_trlte/tree/cm-13.0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: OG5 or Greater Baseband
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-12-03
Last Updated 2016-02-25

Changelogs
Below are changelogs for the different versions of the ROM available for download on AFH. Please re-read the original post, as the Working/Not Working/Known Issues section relates to the MOST RECENT version of the ROM.
06/21/16 - Probable Final Build
Upstream CM features and bug fixes
05/24/16
Includes "Gello" Browser instead of AOSP Browser
Specific ISO options in Camera are now selectable
Updated CPU/Architecture Variants for Build
Upstream CM features and bug fixes
05/18/16
Upstream CM features and bug fixes
05/05/16
Upstream CM features and bug fixes
04/12/16
Upstream CM features and bug fixes
03/21/16 - EXPERIMENTAL BUILD
Upstream CM features and bug fixes
Misc common updates to get closer to my branch
03/08/16 - EXPERIMENTAL BUILD
Upstream bug fixes and features
Updated time_daemon (fix time/date resets?) Credit: @placiano and @Pafcholini
SELINUX Enforcing
Back to Fat Tire's common repo (which I contribute to)
Charging Rapidly will now show if >= 750mA
Vibrator Intensity configurable via Settings->Display
03/01/16 - EXPERIMENTAL BUILD
Fingerprint Scanner (a bit tricky to use, but it works) - Credit: Ljzyal
Added sensorhub service - Credit: raymanfx, fattire
02/25/16 - EXPERIMENTAL BUILD
Upstream bug fixes and features
Less GPS Debugging in Logs
Removed init system prop generator
Removed trlteusc (because of above change)
Shimmed libqc-opt.so
Switched build to clang
Switched back to CM PowerHAL
Added hardware-backed graphics for Recents
Removed qcmediaplayer
Removed tcmiface
Stopped mpdecision from spamming the logs
Removed ZeroLemon fix (Battery Capacity Testing)
02/09/16
Upstream bug fixes
Fixed accidental touch input while in call
02/04/16
Upstream bug fixes
CM - Fresh installs won't default to 24-hour time or a particular date format.
CM - Live Lockscreen (currently cannot disable properly, will be fixed in future build)
APN Settings are now available/editable
Useless "Carrier Settings" option removed.
01/27/16
Bluetooth - Corrected to a more proper fix.
Upstream bug fixes
01/22/16
Upstream bug fixes
Forgot to add the ZeroLemon battery fix (AGAIN), should be back next build
01/14/16
New Camera App
Removal of Busybox in favor of Toybox (upstream AOSP change)
Upstream CM Changes
Forgot to add the ZeroLemon battery fix, should be back next build
01/04/16
Upstream CM Changes
12/16/15
Upstream CM Changes
Exfat external SD cards now are usable
12/10/15
Upstream CM Changes
ZeroLemon Fuel Gauge Fix (by TheLoneWolf20)
12/09/15
Upstream AOSP/CAF Changes
Upstream CyanogenMod Changes
Fixed Button Remapping (Recents Button Now Available for Mapping)
Re-Enabled Stylus Gestures
Added Updated Offmode Charging (Now With Icon!)
One of the upstream AOSP changes is related to DHCP on WiFi. Certain DHCP servers use non-standard UDP ports when they offer addresses. The prior build that was posted would not interpret these properly, and you would lose WiFi connectivity within a minute or so of connecting. This is now fixed.
12/03/15
Initial Version

6.0 is here!!
Thank u so much dude!!!

I'll fix in a bit but the OP says to get Slim Lollipop gapps. That was from me copying the old thread. Use the Marshmallow gapps, obviously!
Sent from my SM-N910P using Tapatalk

Thank you!

Please always review the current status of the ROM before posting any potential bugs. I'm also curious to see if our issue sending texts is fixed - the one that requires switching the network types.
Sent from my SM-N910P using Tapatalk

Superb. Great work nivs.

Getting folder not found in mega, it worked from the office about an hour ago but not anymore.

Won't download on my phone or pc link might be dead ?

Mega site is asking for decryption key ...

I'm uploading to AFH now, will update OP when complete with link.
See OP for AFH link.

Thanks ?

Does it have mobile Hotspot?

Nice work, keep it up!
I have tested and can confirm Hotspot is working.
Also can confirm Xposed Frameworks works without issue on this build as well, just make sure you get xposed-v78-sdk23-arm.

crazycori said:
Nice work, keep it up!
I have tested and can confirm Hotspot is working.
Also can confirm Xposed Frameworks works without issue on this build as well, just make sure you get xposed-v78-sdk23-arm.
Click to expand...
Click to collapse
Sms work without fix?

xyojimbox said:
Sms work without fix?
Click to expand...
Click to collapse
Yeah, I was able to send SMS and MMS without issues right after install.

drcrimzon said:
I'm uploading to AFH now, will update OP when complete with link.
See OP for AFH link.
Click to expand...
Click to collapse
Got it, it worked, thanks a billion! Loving MM

Thanks for the AFH upload! Silly MEGA.
I'm going to work on this a bit more today and try to get some of the bugs worked out. Future uploads will probably be AFH only.
drcrimzon said:
I'm uploading to AFH now, will update OP when complete with link.
See OP for AFH link.
Click to expand...
Click to collapse
Sent from my SM-N910P using Tapatalk

Does or when will this include the zero lemom mod if not does anyone know a kernel I can flash onto this that includes it? Also is this a nightly update?

Just a warning for any newb's, as it states:
•Not Working: Exfat formatted external SD cards
Anyone installs this ROM and has this type of filesystem with your EXTSdcard may very well have issues with your SD card and the ROM thinking it is corrupted and try to FIX (meaning it will format the disk). DO NOT DO THIS or you will lose your SDCard.
You may also have issues after you play with CM13 and go back to other ROMs with not being able to read the SDcard (thinking it is corrupted and not readable, this is NOT true, it is still there). I got around this by wiping device, and using CM12.1 (latest), copying all of my SDCard to my PC, then formatting the SCDard back to a universally readable filesystem.

Related

[ROM][UNOFFICIAL] NCyanogenMod 11 for L7II

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
All bug reports that don't meet this conditions will be ignored:
You have the kernel provided in the zip file
You made a clean flash and didn't restore anything
You made a detailed review of the problem
You provide a logcat in a .txt file (Search internet)
You provide dmesg or last_kmsg if it is a kernel panic (Search internet)
What's working :
Booting
RIL and Mobile Data
Dual-Sim
Storages (Internal and External)
Notification Led
Flashlight
Sound
Wi-Fi
Bluetooth
GPS
Tethering (BT, Wi-Fi, USB)
Sensors
Video playback
Camera
Browser
What's not working :
NFC (causes instability)
Fm Radio
Cpu Governors SmartassV2 and H3 causing instability
Other stuff that is not here
I DO NOT RECOMMEND USING CM CAMERA (it can stuck and you need to restart); USE OpenCamera INSTEAD!!!
Care with volume. Lower until no cracking sound is present
Instructions :
Reboot to the latest TWRP/CWM/Philz
Make a full wipe (/system, /data, /cache, /dalvik-cache, /internal storage)
Flash the CM11 zip
Flash the four_button.zip (if you have dual)
Make factory reset
Reboot to system
Flash Gapps (if you want) => you need to test which work. Flash pico please or you will have crashes. You need to test this. FLASH ONLY AFTER FIRST BOOT
You can also flash Gapps before booting (after CM11) but if you know how to skip initialization screen (the clockwise press trick). If you don't know what I am talking about, don't ask use the flash after first boot method.
You will not have a setup wizard because I am using INIT to set device model. Please use settings to set up your stuff.
Downloads :
ROM:
cm-11-20160306-UNOFFICIAL-vee7-RC3.zip
md5: 95b61238767d250a06891461ef4a7882
four_button.:
four_button_RC3.zip
md5: 0c03597aa15338f1362c26d44f52d5d6
Credits :
@Dazzozo
@luca020400
@skyinfo
@weritos
@Caio99BR
@Kra1o5
@fonz93
TeamHackLg
CyanogenMod
Xda for this nice home
Donators (BIG THANKS!!!) :
@vlmaxx
The source code is entirely available here: https://github.com/Cyanogenmod11-vee7
XDA:DevDB Information
NCyanogenMod 11, ROM for the LG Optimus L7 II
Contributors
neutrondev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod 11
Version Information
Status: Beta
Created 2015-06-12
Last Updated 2015-06-12
Reserved
Changelog:
RC3(06-03-2016)
Fm needs to much work and I don't have time; reverted that
reverted overclock causes problems
removed kernel stuff that caused instability
visual performance should be better now
removed hwcomposer
removed vsync ( we don't support that )
added headphones image when headphone is plugged
added the flashlight thing in drop-down menu
fixed blue video in camera
RC2(27-02-2016)
Initial commits for FM radio
Kernel changes:
fixed memory leaks in ext4
improved ext4 speed
added frontswap
limited max readahead to 1MB
improved response of the UI
added sio, sioplus, bfq, fiops, row I/O
changed default I/O to sio (best for our device)
dynamic read-ahead support
3 times faster integer SQRT operation
frandom entropy (way faster then urandom)
removed useless 320 KHz freq from CPU (more aggressive scaling, to be more responsive)
overclocked to 1036 GHz
Enabled ZCACHE
Enabled ZRAM
RC1 (26-02-2016)
reworked device tree, kernel tree entirely
now all is united under vee7
baseband search to set version
camera now compiled from source (focus while in video mode works); the restriction is still clear. no pause on videos
speed should be improved
battery drain should be gone
dual sim most likely fixed (needs confirmation)
enabled ZRAM
enabled ZCHACE
Beta 2 (19-06-2015)
[fixed] Browser
[fixed] Camera
[fixed] GPS, was not locking right
[observed] Battery drain
Beta 1 (12-06-2015) -> not public
[fixed] entire sound
[fixed] browser crash
[added] dual-sim support
[updated] RIL area
Alpha 2 (11-06-2015) -> not public
[fixed] internal storage
[fixed] part of sound
[fixed] flashlight
[working on] camera
Alpha 1 (08-06-2015) -> not public
Initial bringup
Reserved
Frequently asked questions (FAQ) and Instructions:
QUESTIONS AND ANSWERS:
1. How to enable Developer Option?
Go to Settings->About phone->Build number->Tap on it 7 times.
2. How to enable USB Debugging?
After you enable Developer Option go to Settings->Developer options->Check USB debugging.
3. How to enable Reboot recovery from the reboot menu?
Go to Settings->Developer options->Check Advanced reboot.
4. How to disable Home key unlock (it is enabled by default)?
Go to Settings->Buttons->Uncheck Home button wake.
5. Do you want faster UI?
Go to Settings->Developer options->Scroll down to DRAWING->Set Transition animation scale and Animation duration scale and (Optional: Windows animation scale) to Animation scale .5x
You are reworking it from source or it's werito's port just edited?
tomcis147 said:
You are reworking it from source or it's werito's port just edited?
Click to expand...
Click to collapse
As I said this is my last project. It contains my source.
Finally
Good work
Thank you for this final effort. And thank you for the TWRP 2.8.6.0(doesn't flip the screen on reboot anymore).
I'll be sure to try your CM11 rom once I'm out of university for the summer.
This is amazing. Been waiting for CM11 all my life. Good luck in this and in all your future projects neutrondev!
Sent from my [email protected] by neutrondev using XDA Free mobile app
neutrondev said:
As I said this is my last project. It contains my source.
Click to expand...
Click to collapse
I wish there will not be a battery drain the battery is more stable than the cm10.2. Hahahha. Good Luck with this sir.
What you mean with "not working browser" ?
luca020400 said:
What you mean with "not working browser" ?
Click to expand...
Click to collapse
Probly web view framework is not working that renders websites
luca020400 said:
What you mean with "not working browser" ?
Click to expand...
Click to collapse
I am using chromium webview not classic and genlock has some problems. It is a genlock problem that is also related to webview when I will have time I will investigate it
By the way, and it came to me just now, is it possible for you to include the following options?
- turn on/off the annoying "safe headset volume" message
- turn on/off camera shutter sound
- turn on/off heptic feedback(vibration on unlock/hold home key/input pin code when turning the device on)
- custom power off and restart option: reboot/reboot to recovery/reboot to boodloader
Those would be very comfortable for most of us, if not for everyone. Currently on the purified stock v2(KK 4.4.2) i have to use:
- GravityBox(Xposed) for headset volume message and custom restart options
- Open Camera(from play store) because it has an option to mute shutter sound
- Spare Parts to remove heptic feedback(although you can uninstall the app and still have heptic feedback disabled)
My whole point is to have the above mentioned options native to the ROM itself without using third party apps/frameworks.
shhnedo said:
By the way, and it came to me just now, is it possible for you to include the following options?
- turn on/off the annoying "safe headset volume" message
- turn on/off camera shutter sound
- turn on/off heptic feedback(vibration on unlock/hold home key/input pin code when turning the device on)
- custom power off and restart option: reboot/reboot to recovery/reboot to boodloader
Those would be very comfortable for most of us, if not for everyone. Currently on the purified stock v2(KK 4.4.2) i have to use:
- GravityBox(Xposed) for headset volume message and custom restart options
- Open Camera(from play store) because it has an option to mute shutter sound
- Spare Parts to remove heptic feedback(although you can uninstall the app and still have heptic feedback disabled)
My whole point is to have the above mentioned options native to the ROM itself without using third party apps/frameworks.
Click to expand...
Click to collapse
Haptic feedback in stock KitKat need to edit build.prop, in CyanogenMod you can enable and disable in sound settings and lock screen settings. Advanced restart mode in developer options (I think only CyanogenMod, not sure stock roms)
Sent from my p710 using XDA Free mobile app
What are the main differences between this build and @weritos one? In what way it's expected to be better?
doubt
When can we download ?
Wesley Silva said:
When can we download ?
Click to expand...
Click to collapse
You will see when, don't ask for eta.
Build will arrive soon. The thing is that I want to use Chromium Webview (it is new starting from kitkat). Before kitkat classic webview was used. I can use an external classic but I want to update the stuff to work with Chromium one.
Well just some updates. Found time to work today. Camera got fully fixed (Resume now works). I adverted GPS working. Well trying to get a signal it could not lock. That is also fixed now. I just switched to Classic Web View since exams are comming and I see no problems. We can count browser also fixed. Maybe tomorrow is a good day to release an RC already. Will test until then. Peace out.
neutrondev said:
Well just some updates. Found time to work today. Camera got fully fixed (Resume now works). I adverted GPS working. Well trying to get a signal it could not lock. That is also fixed now. I just switched to Classic Web View since exams are comming and I see no problems. We can count browser also fixed. Maybe tomorrow is a good day to release an RC already. Will test until then. Peace out.
Click to expand...
Click to collapse
What exactly are nightly builds? I searched a lot but still not sure how that will work with this rom. Sorry if I'm too dumb and thanks in advance!
Edit: And another question, no battery drain at the moment? (Is not listed in known issues so I guess is fixed or never wasn't there)
Sent from my p710 using XDA Free mobile app

[EOL][ROM][6.0.1] Unofficial CyanogenMod 13.0 for N7105

[ROM][6.0.1] Unofficial CyanogenMod 13 N7105
NOTICE: Support for this ROM has ended, as I can no longer work on this. Take a look at the other Marshmallow ROMs out there.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working
Graphics
RIL
Wifi
Bluetooth
Sensors
Vibration
Camera
Video Playback
NFC
Audio
Doze
GPS
Ambient Display
Not working/Unknown
Camera occasionally stops working. Reboot to fix or download mediaserver killer and run it.
Data occasionally doesn't work after reboot. Turn airplane mode on and off.
Download
Latest build: 11.03.2016
Older builds: Archive
Gapps: Open Gapps
Installation
Read the FAQ to familiarize yourself with any issues that may come up
Make sure you're using the latest TWRP version (3.0.0)
Download the latest build
If using F2FS, read the F2FS section first
Factory reset in TWRP (Very important! Do not skip)
Flash CM13
Flash Gapps
Reboot
Take a look at the post-install steps. They could fix some errors
For updates, it's OK to dirty flash. If you experience any issues however, it is recommended that you clean flash.
Post-install
Make sure YouTube is really working by playing a video
Enable development settings and enable ADB
If you flashed the Stock gapps package, download this and extract it to /system/app
F2FS
F2FS has been enabled. However, you should not use it unless you know what you are doing. I am not responsible for any data loss or damage that occurs. That being said, it should be OK to use.
YOUR EXISTING DATA WILL BE LOST IF FOLLOWING THESE INSTRUCTIONS. BACK IT UP!
Download this for /data and this for /cache
Flash them in TWRP
Reboot to recovery
Follow the rest of the ROM flashing instructions
Changelog
Changelog: -- 11.03.2016
Synced with CM
Back to my custom repos
Experimental incoming calls fix
Doze reenabled
Accelerometer sensor update
New implementation of Ambient Display: You can now wave your hand to A) show notifications or B) turn on the screen to unlock
Latest kernel updates
Changelog: -- 04.03.2016
Synced with CM
Using upstream smdk4412-common and t0lte repo
Latest kernel updates (supposedly fixes the rotation issues)
Changelog: -- 28.02.2016
Synced with CM
SELinux back to permissive (still causing issues in enforcing)
Changelog: -- 16.02.2016
Synced with CM
F2FS support enabled
Changelog: -- 15.02.2016
Moved Snap building to smdk4412-common
Allow flashlight to have wakelock
Downclock more aggressively (better battery life)
Fix Wifi disconnecting when sleeping
Base for F2FS
Changelog: -- 13.02.2016
Experimental Bluetooth patch
Additional SELinux fixes
Changelog: -- 11.02.2016
Synced with CM
SELinux back to permissive (No more bootloops)
Active Display enabled
Additional Doze stuff
Changelog: -- 08.02.2016
Synced with CM
Removed CM12 chroot hack
Switched to CM's method (with a few minor changes)
SELinux is now enforcing
Changelog: -- 05.02.2016
Synced with CM
Latest security release
Applied latest upstream kernel and system/core changes
Changelog: -- 28.01.2016
Synced with CM
Experimental patch for in call volume
Changelog: -- 25.01.2016
Synced with CM
Switch to BFQ
Boot with noop for faster boot
Changelog: -- 24.01.2016
Synced with CM
Switch to Samsung HAL
Add Snap overlay
Changelog: -- 23.01.2016
Synced with CM
Enabled Doze
Changelog: -- 22.01.2016
Synced with CM
Set SELinux to permissive on stock kernel (should fix the bootloop issues)
Update SELinux policies
Apply additional Netflix patch
Allow ADB on stock kernel
Cleaned up radio access families
Changelog: -- 21.01.2016
Synced with CM (fixes the missing QS tiles)
Fix broken camera
Fix YouTube
Changelog: -- 20.01.2016
Synced with CM
Remove camera2
Test fix for Youtube
Fixed kernel
Changelog: -- 19.01.2016
Synced with CM
Added test code to see if it can stop RIL from crashing
Thanks To/Credits
* CyanogenMod team
* p-an (For the original i9305 RIL code)
* ivan_meler (YouTube and Netflix patches)
XDA:DevDB Information
CyanogenMod 13.0 for N7105, ROM for the Samsung Galaxy Note II
Contributors
PoisonNinja
Source Code: https://github.com/PoisonNinja
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-03-11
Created 2016-01-20
Last Updated 2016-03-23
Reserved
FAQ:
Root
Enable Developer settings and enable root. You can also flash SuperSU (Beta version) in TWRP, but you'll have to flash it every time you upgrade.
Now on Tap
By default, press and hold the Menu button for Now on Tap. To change it, open Buttons in settings and change the action for the button you want to "Search Assistant"
Wifi Issues
Go to developer settings and turn on "Use Legacy DHCP Client". No longer needed
Reserved
Reporting Bugs
When reporting an issue, please provide the following information:
Device (N7105, i317, 889, etc.)
Build Date (Keep in mind the one in About may not be accurate)
Kernel Build Date
Logcat when the issue occur (http://forum.xda-developers.com/showthread.php?t=1726238)
If it's a random reboot, also provide the following information:
Kernel logs. Run "adb shell su -c cat /proc/last_kmsg > /sdcard/Download/kernel.txt" and grab kernel.txt from the Download folder on your phone
Building CyanogenMod
Follow the instructions https://wiki.cyanogenmod.org/w/Build_for_t0lte until the "Get Prebuilt Apps"
Skip that step and do the next one
Edit roomservice.xml in .repo/local_manifests/ and remove the lines with android_device_samsung_smdk4412-common, android_device_samsung_t0lte, and android_kernel_samsung_smdk4412. It should look like this.
Edit blobs.xml in .repo/local_manifests (create it if it doesn't exist). Edit it so it looks like this.
repo sync --force-sync
Delete any folders if you need to in order to resolve sync errors
Turn on caching
source build/envsetup.sh
brunch t0lte
New build is up.
Build2 is booting up just fine. Will be grabbing all my apps and testing this for the day! Thanks @PoisonNinja!
xxjabberwockxx said:
Build2 is booting up just fine. Will be grabbing all my apps and testing this for the day! Thanks @PoisonNinja!
Click to expand...
Click to collapse
No problem. Remember that Camera won't work. I'll fix it later tonight. Videos also won't work, so if a video tries to play, it will freeze. Just exit the app, and you'll be fine.
Roger that PN...So far, strange thing is that it's not restoring my apps. Poop. Gonna have to download everything manually.
xxjabberwockxx said:
Roger that PN...So far, strange thing is that it's not restoring my apps. Poop. Gonna have to download everything manually.
Click to expand...
Click to collapse
What are you using to restore? Are there any errors? I successfully restored using Titanium Backup.
PoisonNinja said:
What are you using to restore? Are there any errors? I successfully restored using Titanium Backup.
Click to expand...
Click to collapse
oh i was talking about the auto restore google play does... maybe its just the transition from L to M.
New Build
New build is up.
Changes:
Fixed missing QS tiles (CM issue)
Fixed broken camera
Fixed video playback (Not Netflix though)
Synced with latest CM sources
If you want video to work, you MUST factory reset and flash again. Sorry about that.
Also, I'm looking for people to test Netflix for me. I suspect I may need more patches, but I don't have a Netflix account to test.
Downloading and testing. 20160121 right?
gathithow said:
Downloading and testing. 20160121 right?
Click to expand...
Click to collapse
Yup. Be warned, I haven't tested this build with Agni. Flashing it may break YouTube, but I doubt it.
PoisonNinja said:
Yup. Be warned, I haven't tested this build with Agni. Flashing it may break YouTube, but I doubt it.
Click to expand...
Click to collapse
Is necessary flash the boot.img?
gathithow said:
Is necessary flash the boot.img?
Click to expand...
Click to collapse
No. Do not flash the boot.img, as it is from a old build. Link is removed from the main post.
Everything works perfectly ... Thank you for the joy you gave me to have the new version of Android.
diogocpr said:
Everything works perfectly ... Thank you for the joy you gave me to have the new version of Android.
Click to expand...
Click to collapse
No problem.
PS: Agni is confirmed working with the latest build. It doesn't break anything.
I'm unable to boot on the latest build on a i317. I just get a bootloop.
jooprzol said:
I'm unable to boot on the latest build on a i317. I just get a bootloop.
Click to expand...
Click to collapse
Have you clean flashed? Try flashing Agni kernel.
PoisonNinja said:
Have you clean flashed? Try flashing Agni kernel.
Click to expand...
Click to collapse
Yeah, clean flashed. Tried with and without gapps, bootloop both times.
Boots up fine with the Agni kernel.
jooprzol said:
Yeah, clean flashed. Tried with and without gapps, bootloop both times.
Boots up fine with the Agni kernel.
Click to expand...
Click to collapse
Interesting. That should have been fixed with the latest build. Let me know if there's anything else wrong.

[ROM][6.0.1][AOSP][OPTIMIZED] UltimateROM [Stable][FINAL #2][21.08.2018]

The Prehistory of UltimateROM
About a month ago I decided to set out to improve the performance of my phone with a more optimized build. I had already begun building OmniROM 5.1.1 with a some set of optimizations based on the work of OptiPop Team, and shortly after some the major issues on Marshmallow on our devices were resolved, this idea to create an ultimatively optimized AOSP-based ROM has born.
Why Should You Use UltimateROM? What makes it different?!
Honestly, I don't necessarily care, how many users or downloads my ROM has. Most importantly, and what I do care about is people liking and enjoying their phone; if you try UltimateROM and you like it, great! I'm glad you enjoy it. If you don't, maybe leave some feedback on how I can improve it, and go try something else in the meantime. If you'd like to know, what I've done that makes this ROM unique, here is a list:
Highly optimized. similar to Linaro(and in many ways, better than), build, resulting in a smoother Android
Compeletely developed in the open, everything I do is right on my GitHub for anybody to use and improve upon.
A unique kernel which attempts to balance features, stability, and of course, performance
Almost the sources, excluding apps, the SystemUI and some more, are based on CyanogenMod ones, which means there are more fixes and support for our legacy devices (even though CyanogenMod itself doesn't really support any devices like our, anyway google doesn't even do that minimal support as CM Team does)
Disabled SELinux. Looking backward on how many issues SELinux was causing and still causing for people that use it on MM, it seems to me a ridiculuos how google promotes and implements it everywhere, without any proof of improving anything rather than making worse.
Current Information
Everything I do with UltimateROM I always test personally on my phone, but anyway...
Code:
#include <disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modifications, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Please also note that currently I don't test installation with the Gapps. So far installation is only tested as dualboot ROM - though, the uploaded build is an usual one, - please let me know if the uploaded build has issues with booting, even though normally this should not happen.
What's working:
RIL (phone/SMS/3G)
Video (playback & recording)
Audio (playback & recording)
Wi-fi
Bluetooth
Camera (Front and rear)
2D/3D HW Acceleration
USB, MTP, ADB
all native tethers (Wifi/BT/USB)
external storage
What's not
Formatting SDcard as adoptable storage will screw it up (don't format / encrypt)
MTP bug with doubled folders in sdcard root folder
ROM features:
Dark Marshmallow Theme
long volume press to skip track
PA Pie control
SlimRecents / improved AOSP recents
Re-added task manager
Navigation Bar
System UI tuner
expanded desktop
storages are swapped by default
extended reboot menu
customizable button backlight settings
Viper4Android FX
superuser embedded
Download
UltimateROM
Installation
Before installation, make sure that you have enough free space on partition /system. AT LEAST 540 Mb is required for this build if installing WITHOUT any Gapps. If you don't have enough space, follow repartition manual. (at your own responsibility for any kind of possible damage. Be sure to measure twice and cut once!). There is a CWM ReParted zip that was tested by @Culateralligator.
wipe cache
make sure you're using TWRP 2.8.6.0. All the below is only tested on this recovery. Philz is not supported by this ROM and not planned to in the near future. Note that TWRP from the linked topic requires preinstalled chrono kernel.
install ROM first
install latest chrono kernel
install gapps (optional), if you do so, make sure you are not running of space on /system ( about GApps )
Sources:
https://github.com/UltimateROM/android_manifest
Thank Yous
SergeyL - many-many thanks for an initial set of patches, device tree and TWRP 3.0.0.0! Also thanks for helping me implementing some features to this ROM.
JDCTeam, BenzoROM - thanks for great cherry-picks!
MWisBest - this project was heavily inspired by his FML (Fork My Life) ROM
OptiPop - an initial set of optimizations that the currently used by me is based upon
@Meticulus - thanks for his great contributions on our devices!
@AGONTUK - thanks for an initial Marshmallow bring up!
@nieltg - Sources for Galaxy Ace 2 device
@golden-guy - thanks for great cherry-picks !
@TeamCanjica - vendor and hardware sources
@Unjustified Dev - Audio fixes
Google
CyanogenMod
AOKP
SlimROMs
EuphoriaOS
OmniROM
AOSPA
Viper4AndRroid Team
And many other devs, I could forget (please write me if I did so).
Special Thanks
@shaqman89 - for providing the build server
@S.AMU - for providing FTP server
XDA:DevDB Information
UltimateROM, ROM for the Samsung Galaxy Ace II
Contributors
ChronoMonochrome, SergeyL, JDCTeam, OptiPop Team, BenzoROM, OmniROM, AOKP, CyanogenMod, SlimRoms, AOSPA, Temasek.
Source Code: https://github.com/UltimateROM
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock 4.1.2 ROM or up + kitkat-compatible recovery
Based On: AOSP, CyanogenMod
Version Information
Status: Stable
Created 2016-03-20
Last Updated 2018-08-20
Changelogs
Changelog
20.08.2018 - build #13
sources update
switch to opensource sensors
switch more device libs to open source base
unified codina / janice build
02.12.2017 - build #12
fixed native moving apps to SDcard
APP2SD and similar apps now should work correctly *
fixed second incoming call not to crash rild (not tested, needs confirmation), thanks to @SergeyL
small RIL fixes
NOTE: installation method was updated. Flash latest chrono kernel build after this ROM install.
02.04.2017 - build #11
kernel updated to r5.0
sdcard mount fixes
integrated an unofficial build of the Xposed framework
ported the utility mtools *
* for repairing the broken sdcard label you can move the file /system/bin/mtools to /system/xbin folder, then type in the terminal emulator mlabel/i]. It will show the current sdcard label and will prompt to type the new one.
27.02.2017 - build #10
updated sources to 6.0.1_r78
added an initial support of the PowerHAL *
ported some changes from Resurrection Remix 7.1.1 build (thanks to SergeyL for patches)
updated kernel to r5.x.x (mostly updates from google android-3.4 kernel)
changed recovery to TWRP 3.x.x
unstable MySQL optimizations are reverted
changed buttons backlight mode - backlight is only enabled when buttons are pressed
experimental change scheduling policy of the surfaceflinger to FIFO
maybe, something yet
* at the moment there's no support of changing the PowerHAL profiles from the Settings, however, you can change profile in a file /system/etc/init.d/999powerhal
Proceed installation of this build only with data wipe.
20.09.2016 - build #9
Fully switched to an opensource RIL! Many thanks to Meticulus for finding the working RIL sources and fixing it, also I'd like to thank millosr and mickybart from Nozomi (Xperia S) forum for fixing the crash when performing a call and providing patches for debugging the proprietary libril!
More libs now are built from source - credit goes to Meticulus
Added sdcardfs support (requires at least build r4.8 of Chrono Kernel)
Added home key press to accept the incoming call and power key press to end the active call features from CyanogenMod - thanks to SergeyL for helping with finding those patches
Changed LowMemoryKiller tunables to the more aggressive + increased zram size to 400Mb - multitasking should be (hopefully) better
Changed Dynamic governor tunables to be more aggressive
Various minor fixes that improves the stability of ROM
We've also finally got rid of all shim (i.e. interposed) libraries that were needed in order for some features (camera, GPS etc) to work
30.05.2016 - build #8
updated wifi autoconnection fix (fixed the battery stats)
fixed SystemUI FC when switching USB mode via status bar notification
fixed GSM / WCDMA preferred / WCDMA Only switching
fixed soft reboot when switching 2G/3G with an enabled mobile data
added Pie Control from Paranoid Android
added SlimRecents
updated AOSP recents implementation ("clear all" button doesn't properly work, so don't enable it or use SlimRecents)
added task manager
allowed disabling of brighness slider disabling
revert AOSP camera to 5.1.1 (fixed the photo cropping issue)
added FAT images mounting via UMS support (use
sys.config.opt_sd0device=full_path_to_the_image.img build.prop setting to override the device mounted as Sdcard0 or sys.config.opt_sd1device for Sdcard1)
26.05.2016 - build #7
Work around wifi autoconnection issue
Fixed video encoding issue by some apps (instagram video upload etc) - thanks to Meticulus for the original patch
Added LockClock back
Added option to show the weather in the status bar
Various small improvements, tweaks etc.
23.05.2016 - build #6
More ROM modules compiled with GCC instead of Clang (GCC supports more optimizations)
Almost ROM modules compiled with Link Time Optimizations
Enabled graphite optimizations for more ROM modules
Added autovectorization optimization on per-modular base
More modules built in ARM mode
Allowed disabling of FC notification
Added time-context custom header images feature
Added customization of the carrier label
Added SystemUI tuner
Added display autorotation setting
19.05.2016 - build #5
updated kernel to r4.4.1
added and enabled by default UMS (USB Mass Storage) mode
re-added some default AOSP optimizations
added navigation bar
added battery level icon customization setting
added long back press to kill app feature
remove 3 secs delay in Superuser before to give the app permissions
added feature of disabling mediascaner at boot
added Sqilte performance improvements
disabled an unnecessary debug
another fixes / improvements
fixed graphical glitches in some apps caused by new UMP lib
resized bootanication (thanks Lemu @ 4pda.ru)
fixed init.d scripts
added aggresive Dynamic governor settings
13.05.2016 - build #4
cleaned up the default google optimizations, removed unnecessary flags
disabled forcible ARM mode optimization - until I revisit this again
added performance settings from OmniROM
added CM Filemanager
added a few more opensource code to libUMP, replacing calls to old library
fxed up an inadeqate CPU time consumption caused by logd process
6.05.2016 - build #3
updated sources to 6.0.1_r30
kernel update to r4.3.1
switched to GCC 5.3 toolchain by UBER
enabled graphite, fast math, loop nest, unsafe loop and some more optimizations
entire build is compiled in ARM mode
switched to opensource RIL libraries (based on CyanogenMod repos)
UMP (Unified Memory Provider) library now is mostly opensource - based upon CM sources
Attempt to fix storage permission issues in some apps such as browser - not tested
fixup for RIL java code - thanks to @SergeyL
disabled scrolling cache
SQLite code optimizations
Reduced various delays
many other fixes and improvements - thanks to SergeyL for patches
20.03.2016 - build #2
fixed APN editor crash
added removed fonts back
removed Gallery, Calendar and PrintSpooler
Viper4Android driver post-install (no need to install manually anymore)
Fixed busybox related issues
20.03.2016 - build #1
initial release
Miscellaneous
reserved
Take some time to try this ROM, and now there are some issues
1.there are lost 4 opentype fonts (compared with Sergeyl's CM13)(JP,KR,SC,TC-Regular),so Simplified Chinese display likes XXX
2.V4A needs to works with busybox, lol...
But ROM works smooth
fim5646 said:
Take some time to try this ROM, and now there are some issues
1.there are lost 4 opentype fonts (compared with Sergeyl's CM13)(JP,KR,SC,TC-Regular),so Simplified Chinese display likes XXX
Click to expand...
Click to collapse
These are removed, because of overly sized ROM. Are these fonts only that support these languages? If so, I'll of course re-add them. I was comparing this ROM to my OmniROM and haven't found these fonts, so I thought they can be safely removed.
2.V4A needs to works with busybox, lol...
Click to expand...
Click to collapse
I guess, it's common 6.0.x problem, as busybox has got partially replaced by toolbox and toybox from AOSP, thus making some apps confused.
ChronoMonochrome said:
These are removed, because of overly sized ROM. Are these fonts only that support these languages? If so, I'll of course re-add them. I was comparing this ROM to my OmniROM and haven't found these fonts, so I thought they can be safely removed.
Click to expand...
Click to collapse
Yeah,these 4 fonts only support Janpanese,Korean,Simplified Chinese and Traditional Chinese,(lastest outdated AOSP 6.0 has same problem...)Maybe OmniROM has different font files
ChronoMonochrome said:
I guess, it's common 6.0.x problem, as busybox has got partially replaced by toolbox and toybox from AOSP, thus making some apps confused.
Click to expand...
Click to collapse
Yeah....
Is there any way to fix sdcard problem?
And thanks for this awesome rom.
Fake2Dead said:
Is there any way to fix sdcard problem?
Click to expand...
Click to collapse
What problem exactly?
What GApps should we install, these modified by SergeyL? open_gapps-arm-6.0-pico-20160204.zip
https://yadi.sk/d/HX0CiHNnoGiC5
Culateralligator said:
What GApps should we install, these modified by SergeyL? open_gapps-arm-6.0-pico-20160204.zip
https://yadi.sk/d/HX0CiHNnoGiC5
Click to expand...
Click to collapse
GApps aren't personally tested by me, but I guess, you'll need those provided by SergeyL else keyboard will crash.
ChronoMonochrome said:
What problem exactly?
Click to expand...
Click to collapse
phone says sandisk sd card is corrupted. I tried to format from phone but it didn't work. Also i can't use my camera without external sdcard. And why extsdcard is sdcard0
"Sorry for my english if a have a fault"
Fake2Dead said:
phone says sandisk sd card is corrupted. I tried to format from phone but it didn't work. Also i can't use my camera without external sdcard. And why extsdcard is sdcard0
"Sorry for my english if a have a fault"
Click to expand...
Click to collapse
Did you format your sdcard as adoptable(internal) storage? This is something you actually shouldn't do and it's explicitly mentioned in the issues list as it doesn't work properly on our devices. SDcard should normally work without formatting (in case of M - which also performs encrypting of it), thanks to @SergeyL work. Now you have to format sdcard from Windows / *nix / whatever other OS; if even this won't help, we'll probably need a volunteer to test it. Personally for me sdcard works, but you may want to try SergeyL's CM13 to see if it's working there.
WiFi is unstable, lost connection from time to time, Web Browser is crashing. And any of gapps do not work - do not fit in system. Yes, i readed first post, i have orginally partitioned internal card and do not want touch it. SergeyL's CM13 work with smallest gapps
ChronoMonochrome said:
Did you format your sdcard as adoptable(internal) storage? This is something you actually shouldn't do and it's explicitly mentioned in the issues list as it doesn't work properly on our devices. SDcard should normally work without formatting (in case of M - which also performs encrypting of it), thanks to @SergeyL work. Now you have to format sdcard from Windows / *nix / whatever other OS; if even this won't help, we'll probably need a volunteer to test it. Personally for me sdcard works, but you may want to try SergeyL's CM13 to see if it's working there.
Click to expand...
Click to collapse
Thank you so much for help. I tried to format from windows(exfat) and it worked!
Edit: Don't try to format sdcard as fat32 it didn't worked on me
Pastorious said:
WiFi is unstable, lost connection from time to time, Web Browser is crashing. And any of gapps do not work - do not fit in system. Yes, i readed first post, i have orginally partitioned internal card and do not want touch it. SergeyL's CM13 work with smallest gapps
Click to expand...
Click to collapse
I can confirm Web Browser is unstable.
I haven't those WiFi problems yet, but I'm testing for little time.
What do you mean with smallest GApps?
I've tried no repartition + SergeyL GApps and I get ERROR CODE 70 -not enough system space-.
Culateralligator said:
I
What do you mean with smallest GApps?
Click to expand...
Click to collapse
I found somewhere gapps ~45MB, still too big for install, i have no idea how install Play shop
New build is 20.03.2016(#2) UP!
Changelog
fixed APN editor crash
added removed fonts back
removed Gallery, Calendar and PrintSpooler to free up some space
Viper4Android driver post-install (no need to install manually anymore)
Fixed busybox related issues
Might fix GApps not being fitted on /system issue in the future, but I'll need a volunteer to test the new partition scheme. If anyone knows how to modify CWM repartition scheme zip and create a new one with ~700-750Mb on /system, it would be even much great, because right now I have absolutely no time for this.
Enjoy!
Something weird... I've connected phone to PC 5-6 times.
Last 2 times appears sdcard1 with 1,09GB (real internal sd).
However, I have access to files of real external sd. But when I try to paste a file, it says I have no space for it.
Succesfully installed gapps removed printspooler webbrowser gallery calendar clock and 1 more thing and i found 48 mb gapps
Culateralligator said:
Something weird... I've connected phone to PC 5-6 times.
Last 2 times appears sdcard1 with 1,09GB (real internal sd).
However, I have access to files of real external sd. But when I try to paste a file, it says I have no space for it.
Click to expand...
Click to collapse
Indeed, it seems that I have misapplied one fix to the vold binary. Does this issue also appear on CM13?
P.s. it's possible that vold from CM13 will also work, because UltimateROM use same sources as CM. Can anyone try replacing /system/bin/vold and check if it helps?

[ROM][SM-P605][7.1.2] Unofficial LineageOS/CyanogenMod 14.1 for lt03lte (20.03.2021)

This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!
LineageOS/CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS/CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (GApps). LineageOS/CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
How to flash:
-Be sure you are on 5.1.1 Bootloader and Modem (Flash 5.1.1 firmware via Odin) !
-Flash TWRP (version 3.0.0-0 or newer recommended)
-Make Nandroid backup (optional)
-Wipe > Advanced Wipe > select data, system, ART/Dalvik Cache, Cache, Internal Storage > Swipe
-Install > select Lineage14.1 Zip > Swipe, optional: flash GAPPS, SU Addon (before rebooting!)
-Reboot
Please read full OP before posting or flashing anything. Please don't report any bugs, if you use Xposed, any mod or modified the system.​
Please report no issues, if you
using the official builds (or others than mine)
flashed Xposed
or modified the system
What is working
Everything
No major issues/bugs
Download
Other Builds
GAPPS​
Notes:
- If SIM is not detected/RIL not working, flash 5.1.1 firmware again!
- Enable root: flash SU Addon, Settings > About tablet > tap 5x at build number. Settings > Developer options > Root Access
- just ignore E: Unknown Command errors in TWRP
- Flash GAPPS before reboot first time after flash!
- If using MTP/PTP shows no files, please tap one more at transfer files in notifications
- If something not listed ist not working, please test it also with SELinux permissive (setenforce 0 via Terminal Emulator/ADB Shell or use SELinuxModeChanger)
Changelog:
20210320: Synced sources
20200913: Synced sources, added midi support, disabled 5 GHz AP
20200318: Synced sources
20200124: Synced sources, a few kernel changes
20191101: Synced sources, small changes
20190801: Synced sources, slightly higher volume on speaker and Headset, small changes
20190303: Synced sources,smaller changes
20181226: Synced sources, changed SEPolicy, updated HID driver, small changes
Older
--Lineage--
20181217: Synced sources
20181029: Synced sources, small changes
20180816: Synced sources
20180618: Synced sources (Security Patch Level 2018-05-05), switched to 2048 heap/hwui memory map, sepolicy
20180524: Security Patch Level 2018-05-05
20180424: Synced sources
20180326: Synced sources, small things
20180307: Synced sources, kernel security patches, a few things
20180124: Synced sources, removed libsecril and legacy sd symlink, kernel updates
20171205: Synced sources, RIL changes, implemented stylus gestures
20171026: Synced sources, fixed magnet cover, switched to source built CAF ril, some kernel changes
20170925: Synced sources, fixed camera, kernel updates, sepolicy updates
20170829: Synced sources, switched to msm8974-common kernel (with some changes for our device), CLOCK_BOOTTIME_ALARM support, some smaller changes (Note: Please flash boot.img from post #643 to fix camera!)
20170803: Fixed MpDecision
20170802: Synced sources, only activate button light if they are pressed, added missing low latency record (-->for Skype etc.), updated init and sepolicy, some small improvements and changes
20170723: Synced sources, grant proper unix permissions for netmgrd and rmt_storage, updated sepolicy and init, smaller changes
20170703: Synced sources, removed buggy timekeep (fixes wifi problem), RIL updated (fixes Autotimezone), disabled live display per default, some minor changes
20170626: Synced sources, switched to Sony Timekeep (experimental), added SamsungDoze, enabled sdcardfs, enabled CIFS/NFS, mac access fixed, some kernel changes
20170614: Synced sources (Android 7.1.2_r17), quiet "KERNEL IS NOT SEANDROID ENFORCING"
20170604: Synced sources, fixed a bunch of kernel leaks
20170518: Synced sources, Only expose su when daemon is running
20170507: Synced sources (android-7.1.2_r8, Jelly...), correct keylayout config, enabled volume wake settings, added missing liblight defines, fixed prefered network setting, fixed rotation problem
20170422: Synced sources (Android 7.1.2), F2FS support, changed keylayout again, some kernel changes, IR changes from Lineage, dex preopt (not prerooted, flash SU Addon)
20170320: Synced sources, prerooted again, enabled Miracast/WiDi overlay, added missing SEPolicys for s-pen third party apps
20170301 #2 : Fixed tethering/hotspot (not prerooted, flash SU Addon)
20170301 #1: Synced sources, improved macloader related stuff (not prerooted, flash SU Addon)
20170203: Synces sources, fixed telehony fc after Nandroid restore, enhanced off charging mode
20170126: Synces sources, enabled Blur, a few kernel changes
20170114: Synced sources (Android 7.1.1_r9)
20170104: Synced sources, removed some deprecated stuff (dhcpcd entries, legacy symlinks)
20161231: Synced sources, Bluetooth disabled per default, unknown sources enabled per default
20161227: Synced sources, first Lineage build
--CyanogenMod--
20161215: Synced sources (Android 7.1.1_r6), disable notification LED for now (until I find a better solution), switched to common IR/lights HAL, last build from CyanogenMod Sources
20161207: Synced sources (Android 7.1.1), reduced power consumption, add missing SELinux rule
20161202: Synced sources, fixed magnetic cover, fixed VOIP mic
20161128: Synced sources, fixed off charging Mode, changed keylayout: Menu button: menu, longpressmenu: splitscreen view, doubletaphome: recent Apps
20161115: Synced sources, fixed camcorder, mapped longpressmenu as menu
20161110: Synced sources, Setup Wizard fixed, updated SEPolicy
20163010: first xda release, sync with cm 14.1 sources
Credit: LineageOS/CyanogenMod Team, Maintainer and Valera1978
Kevin F. Haggerty, Paul Keith
Sources:
Device
Kernel
Kernel since 20170829
Vendor
XDA:DevDB Information
Unofficial LineageOS (CyanogenMod) 14.1 for SM-P605, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
davidmueller13
Source Code: http://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 5.1.1 bootloader and modem
Based On: LineageOS
Version Information
Status: Stable
Created 2016-10-30
Last Updated 2020-09-17
FAQ - Frequently Asked Questions
FAQ
Please read before posting anything!
Will this work/can you make it work on P600/P601?
Short answer: No! Only SM-P605 is supported.
But there are other projects for your device. For P600 (n1awifi) you can just download the latest official nightly.
Can you add xy feature?
It is and will stay a build straight from LineageOS sources, not a fork, so no. And also afaik there is no feature request way for LineageOS atm.
My SIM card is not recognized. What can I do?
As RIL blobs are from 5.1.1 firmware package, you need to be on modem from 5.1.1 firmware. The easiest way: just get an firmware package from Sammobile, Updato... and flash it via Odin. If it's still not working after that, do the same again (sometimes this is necessary).
Something is not working (correctly) / I found a bug? What should I do?
Make sure there are no potential courses for that issue like installed Xposed or system modifications. Also look, if it's listed in the OP or somebody already mentioned it. If not, just post about it and all information about it you have (circumstances, steps to reproduce it...).
Of course only for my builds you found in that thread, not for other/offical builds.
Amazing work!
Running your 10-27 build since yesterday night and working great so far on my T-Mobile P-607T.
Only thing noticed so far are that can not change the battery style and display battery % on the statusbar.
That's purely cosmetic, the build is fast and stable. Weather location service works, have not tested GPS
nav yet.
Setup wizard worked for me on the 10-27 build.
Will download and test this build.
Thanks for keep supporting the Note 10.1 2014.
Thanks
Thanks for making this sweet build. Everything works well on my P607-TM except for the fact that it thinks the SIM card is not inserted. I came from a aosp 6.0.1 build and did an advanced format of everything except for external SD card. I tried formatting a few times and reinstalling a few times with no luck.
iandy1 said:
Only thing noticed so far are that can not change the battery style and display battery % on the statusbar..
Click to expand...
Click to collapse
Yes, some stuff for that is not fully ported and implemented yet.
iandy1 said:
Setup wizard worked for me on the 10-27 build.
Click to expand...
Click to collapse
Thats the SetupWizard App, that comes with GAPPS. I had to remove the CyanogenMod SetupWizard, because of a FC while Wifi Setup. (I think, it uses the deprecated SETUP_WIFI_NETWORK.)
temijun said:
except for the fact that it thinks the SIM card is not inserted. I came from a aosp 6.0.1 build and did an advanced format of everything except for external SD card. I tried formatting a few times and reinstalling a few times with no luck.
Click to expand...
Click to collapse
Make sure, you are on the latest modem (e.g. by flashing latest firmware).
Also an LogCat would be useful (How to do this).
Yeah you're absolutely right about the radio firmware once I upgraded baseband from P607TUVUBOI2 to P607TUVSBPH1 and reflash everything works as expected! thanks again for this awesome rom!
davidmueller13 said:
Yes, some stuff for that is not fully ported and implemented yet.
Thats the SetupWizard App, that comes with GAPPS. I had to remove the CyanogenMod SetupWizard, because of a FC while Wifi Setup. (I think, it uses the deprecated SETUP_WIFI_NETWORK.)
Make sure, you are on the latest modem (e.g. by flashing latest firmware).
Also an LogCat would be useful (How to do this).
Click to expand...
Click to collapse
firmware is very smooth, but
- Sometimes crash settings app
- Does not work the microphone during a call through Skype
Does this version fix the bug that I saw with rotation?
Edit. Isn't a bug. Settings disabled rotation for certain orientation by default. Need fix by changing in settings.
it cant read my sim
Does it support exfat or ntfs file system with write rights?
great rom..sometimes a little bit stuttering, but finally great to have 7.1
how do you use your stylus? do u have a special app for that?
Thank you again
ameenkhaled said:
it cant read my sim
Click to expand...
Click to collapse
I flashed back to the default TMobile P607TUVUBOI2 firmware and then did an internal update to P607TUVSBPH1 which updated the radio baseband. This solved the missing SIM issue for me.
Hooray! One more of my devices could hop on CM14.x! I think imma start building myself starting next month...
Are MTP and ADB connections working too? Those aren't present in official CM13 nightlies and are the most irritating I found in them.
Sent from Google Nexus 6P @ CM13
AndyYan said:
Are MTP and ADB connections working too? Those aren't present in official CM13 nightlies and are the most irritating I found in them.
Click to expand...
Click to collapse
Yes, they work.
In the CM13 Nighlys the kernel driver for MTP is failing. If you want to fix/add some things to your CM13 Builds:
Fix camera failing while SELinux Enforcing: http://review.cyanogenmod.org/#/c/165576/
Fix MTP-driver: https://github.com/davidmueller13/k...mmit/4785cabeb9047e8d9e5e19e3f3f5c4f4e3a59ceb
enable adoptable storage: https://github.com/davidmueller13/d...mmit/5ed5e71080c366e3e35ee23f032b86da74db2dba
And if you want to build CM14, it's important that you know that i use the common graphic binaries:
https://github.com/TheMuppets/proprietary_vendor_qcom_binaries
temijun said:
I flashed back to the default TMobile P607TUVUBOI2 firmware and then did an internal update to P607TUVSBPH1 which updated the radio baseband. This solved the missing SIM issue for me.
Click to expand...
Click to collapse
Does PH1 update the baseband? I extracted modem.bin from PH1 tar and flashed, and later flashed the whole PH1 package from Odin, but baseband stays at OI2...
Sent from Google Nexus 6P @ CM13
---------- Post added at 05:38 PM ---------- Previous post was at 05:37 PM ----------
davidmueller13 said:
Yes, they work.
In the CM13 Nighlys the kernel driver for MTP is failing. If you want to fix/add some things to your CM13 Builds:
Fix camera failing while SELinux Enforcing: http://review.cyanogenmod.org/#/c/165576/
Fix MTP-driver: https://github.com/davidmueller13/k...mmit/4785cabeb9047e8d9e5e19e3f3f5c4f4e3a59ceb
enable adoptable storage: https://github.com/davidmueller13/d...mmit/5ed5e71080c366e3e35ee23f032b86da74db2dba
And if you want to build CM14, it's important that you know that i use the common graphic binaries:
https://github.com/TheMuppets/proprietary_vendor_qcom_binaries
Click to expand...
Click to collapse
Do the patches works for TWRP too? Last I recalled TWRP also doesn't have ADB/MTP, if those could fix it I might consider syncing TWRP and do a patched build...
Sent from Google Nexus 6P @ CM13
AndyYan said:
Do the patches works for TWRP too? Last I recalled TWRP also doesn't have ADB/MTP, if those could fix it I might consider syncing TWRP and do a patched build...
Click to expand...
Click to collapse
I think, it's the same issue. If you want to build TWRP you should use a OmniROM source tree (i change the device tree for that a bit :https://github.com/davidmueller13/device_lt03lte_nougat/tree/omni ).
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Cirno5 said:
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Yes, that is normal. I don't know how to fix it myself without gravitybox. That option won't work because 7.0/7.1 has no xposed support yet.
Sent from my LG-H850 using XDA-Developers mobile app
Cirno5 said:
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Manually edit the .kl file in /system/usr/keylayout (can't remember which, but should be obvious).
Sent from Google Nexus 6P @ CM13
Cirno5 said:
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Change in sec_touchscreen.kl in system/usr/keylayout "APP_SWITCH VIRTUAL" to "MENU VIRTUAL".
I think, i will change it in the next build and set the app switch to "long press home" and disable "double tap home".
Good news for camcorder: I fixed recording, but we have to wait for some changes in CM14.1. But at least it works for our device finally in CM13.

[CLOSED][ROM][10.0][UNOFFICIAL] LineageOS-17.1 [begonia/begoniain]

About LineageOS
LineageOS is a free, community-built, aftermarket firmware distribution of Android 10.0 (Ten) which is designed to increase performance and reliability over stock Android for your device. All the source code for LineageOS is available in the LineageOS GitHub repo and if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website
Downloads Links
begonia | begoniain
Google Applications (optional) :
OpenGapps (Use packages for ARM64, Android 10.0, Nano)
Information: Flash the GApps before the first boot. If not, a clean flash is recommended.
Flashing and updating
LineageOS clean install :
- Boot into the LineageOS recovery.
- Format data and install the latest LineageOS build
- Install OpenGAPPS package, if you want GAPPS otherwise skip this step
- Wipe Dalvik/Cache and Reboot into System
About the builds
- Device Side Sources are on official org
Issues and reports
- Report issues only if you use the ROM kernel
- If an additional mod is installed, make sure it's unrelated, and mention it
- Make sure the issue wasn't discussed earlier in the threads
- Share a log of the error and steps to reproduce it
You can also join and help me debug your issues in the following Telegram Group: https://t.me/xiaomi_begonia | Not required but donations are welcome: Paypal
XDA:DevDB Information
LineageOS-17.1, ROM for the Redmi Note 8 Pro
Contributors
TheImpulson
Source Code: https://github.com/LineageOS/android_kernel_xiaomi_mt6785
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 17.1
Stable Release Date: 2020-08-11
Created 2020-03-26
Last Updated 2020-08-12
Current Bugs include:
The camera doesn't have full resolutions support yet
SELinux is Permissive
Don't report bugs related:
to CTS failures (LineageOS does not tamper with CTS results)
with Magisk (It sets a number of props on boot like changing build type to the user resulting in broken adb root etc)
with Custom Kernel, MODs (Report that to MOD maintainer)
with non-recommended vendor or builds (Use what is told in instructions)
Reserved
Reserved
Amazing to see this around. Thanks for your hard work. Will probably play around with this for a while
This rom willl be good for daily driver?
L1nx99 said:
This rom willl be good for daily driver?
Click to expand...
Click to collapse
Please, it's just 3 posts above, read. See BUGS and decide if this can be a daily driver for you.
For ME, when Wifi is fixed, it will be a daily driver. And I will wait patientily until then, helping the dev whenever I can testing releases.
wifi working fine
Reserved !
Is USB tethering work?
when NFC will be working ?
Is it even possible for NFC to make it to working?
Ask it another time in the same page please. If it was possible it would've been done already. Probably working on it, figuring out how to do it or just busy with other stuff. Be patient and be glad that some of these devs are working in this device.
korbielow said:
when NFC will be working ?
Click to expand...
Click to collapse
Asking for ETA is against XDA forum rules and disrespectful to the developer.
It will be done when it's done. If you can't wait, use stock.
I must downgrade Android 10 to 9,to be able to flash this ROM,or any other?
tze_vitamin said:
I must downgrade Android 10 to 9,to be able to flash this ROM,or any other?
Click to expand...
Click to collapse
If you are on MIUI 11 - Android 10, you WILL need to downgrade to Android 9! This method will not work if you're on Android 10. Use MiFlashPro or fastboot to flash all partitions to a compatible MIUI 10 or 11 Android 9 build.
copypasta from megathread.
L1nx99 said:
This rom willl be good for daily driver?
Click to expand...
Click to collapse
L1nx99 said:
Is USB tethering work?
Click to expand...
Click to collapse
korbielow said:
when NFC will be working ?
Click to expand...
Click to collapse
Pushed a new update on GitHub Releases. Here is the changelog:
- Updated safe media volume warning level
- Hided sRGB toggle in developer options
- Fixed Ambient display and enabled Always on Display
- Fixed brightness issues by importing overlays from Google Pixel (marlin)
- Added Trust Hal, see it in Privacy Settings
- Enable option for full-screen aspect ratio
- Added notch overlay, this makes center clock and network speed indicator unavailable as they are unsupported with notched devices
- Added led notification and battery led customization options, see it in Notifications settings
- Turned on WiFi MAC randomization
- Hex-edited MTK RIL lib to fix incoming calls
- Upstreamed kernel to v4.14.158
The hotspot is also working, however, it's buggy. You need to remove SIM cards to make it work. That will be fixed in future builds (hopefully).
TheImpulson said:
Pushed a new update on GitHub Releases. Here is the changelog:
- Updated safe media volume warning level
- Hided sRGB toggle in developer options
- Fixed Ambient display and enabled Always on Display
- Fixed brightness issues by importing overlays from Google Pixel (marlin)
- Added Trust Hal, see it in Privacy Settings
- Enable option for full-screen aspect ratio
- Added notch overlay, this makes center clock and network speed indicator unavailable as they are unsupported with notched devices
- Added led notification and battery led customization options, see it in Notifications settings
- Turned on WiFi MAC randomization
- Hex-edited MTK RIL lib to fix incoming calls
- Upstreamed kernel to v4.14.158
The hotspot is also working, however, it's buggy. You need to remove SIM cards to make it work. That will be fixed in future builds (hopefully).
Click to expand...
Click to collapse
Thank you for the update!
video bug in instagram,whatsapp,facebook etc

Categories

Resources