Steps to flash:
NOTE : Use only one sim in first boot.
1. Download rom,supersu and gapps.
2.Save it in internal storage . (UNMOUNT SYSTEM AND CACHE VIA TWRP THEN ONLY START FLASHING PROCESSES)
3. Flash rom,then gapps and then supersu in one GO .First boot itsef(VERY IMPORTANT STEP) OR else gapps wont work (Added Fix below if gapps still dont work)
4.Wipe dalvik and cache reboot enjoy.First boot takes time
REMEMBER FIRST BOOT TAKE SOME TIME. AROUND 15MIN. IT WILL BE IN BOOTANIMATION. SO DONT WORRY
NOTE : (Remove gapps flashing in 3rd step for this FIX)
For those having trouble booting into the rom after flashing, or adding one or more google accounts there is a workaround that I found here on the Meizu forums.
Basically you just need to follow all of the steps in the OP. However, do not flash Gapps!! After booting into the system and completing the initial setup, open App Center, search for the app Google Installer, open the apps history, and download one of the older versions that is 30+mb (the newer versions are about 2-3mb). Install Google Installer, open it, then install Gapps from there. Then you should be able add your google account/s.
Thanks @chr0nic_flashr
Note for stuck in login for some users :
1--- If you get stuck after flashing gapps then reboot to twrp.
2--- Mount system partition.
3--- go to filemangaer in TWRP. goto location system/privapp
4--- find the folder setup wizard. Delete it reboot system. you wont be in stuck anymore
:Note
1. This ROM include the 3 way slider,Laser Auto Focus,Hydrogen Camera and Fingerprint
2. This ROM is base on Hydrogen OS 1.2,it contain some of the original(Hydrogen OS) feature. (Fingerprint security inbuild in ROM now so no need to flash Hydrogenos before flashing flyme)
CHANGELOG :
4.5.4.3R_20151220: (Version 3) (LATEST)
1.GPS signal lost when using navigation apps.(Fixed)
2.Added material design.
3.ROM is now support DPI customization.(Root is necessary)
4.Upgrade to 4.5.4.3R
5.SIM card selection problem.(Fixed)
NOTE :When you are using Fingerprint to unlock,if you use PIN to unlock your phone instead,it may cause the home key become not sensitive.
12-JANUARY-2016 (Upstream in Flymeos Code)
4.5.4.4R_20160112:
1. Upgrade to the latest 4.5.4.4R Flyme Codes
Please select the latest 4.5.4.4R complete package ,
4.5.4.3 user can choose to upgrade OTA package
Known Bug:
None For Now.If you find. report
About the 3 way slider:
Unlike the CM or Hydrogen OS,it don't have a GUI clearly state the mode.
Up side is silent
Middle side is vibrate
Down side is all
Download Link:
ROM
h[STRIKE]ttp://pan.baidu.com/s/1KboOu[/STRIKE] (old) (version 1)
18-DECEMBER-2015
http://pan.baidu.com/s/1KboOu (version2)
https://drive.google.com/file/d/0BzMzLuBx4Rx2MjBFZmdKSnNpUUk/view?pref=2&pli=1 (mirror v2 google drive)
22-DECEMBER-2015
https://mega.nz/#!HV12mSIQ!jm0rjJoy-0PpJ-Spyi28ewHc4PchN5B001GxfaEv5U0
https://drive.google.com/file/d/0B0gLY7vcXplzb1V3ZEt5Q2YtOXM/view
12-JANUARY-2016
Full Rom : http://pan.baidu.com/s/1o6S9tto
(Not Tested) Incremental Update : http://pan.baidu.com/s/1KboOu
Google Drive Mirrors
Full ROM :
https://drive.google.com/file/d/0B0gLY7vcXplzRXFCY1gwOTFoQ3M/view?usp=sharing
OTA :
20151220--->20160112
https://drive.google.com/file/d/0B0gLY7vcXplzRTNPRm5FUm0xR3c/view?usp=sharing
GAPPS :
https://drive.google.com/file/d/0BwhIwerYs3cdbVVpMXRhbVoycDA/view?pref=2&pli=1
Video Review
https://www.youtube.com/watch?v=wvaIteeV0iI
Thanks @tonisauffa
SOME SCREENShOTS
I'm downloading this OS but that server is extremely slow in the US, thanks for sharing mate
dark_topo said:
I'm downloading this OS but that server is extremely slow in the US, thanks for sharing mate
Click to expand...
Click to collapse
Yes baidu i slow everywhere
please mirror it to google drive if possible.so it can help many
And dont forget flash and use h20s 1.2. use fimgerprint reader and then go to recovery wipe everything and then flash fymeos for fp TO WORK
Downloading at 200 kb/sec. Says 1 hour to complete. I can upload to mirror when it's done. Is that ok?
jjbro007 said:
Yes baidu i slow everywhere
please mirror it to google drive if possible.so it can help many
And dont forget flash and use h20s 1.2. use fimgerprint reader and then go to recovery wipe everything and then flash fymeos for fp TO WORK
Click to expand...
Click to collapse
I'll provide you a Google drive link in some time.. Can you please tell me would this work with DualBoot patcher??
Edit I can't get the file downloaded..
Says 25 minutes. I have 1 gbps up so it should take no time to upload to google drive.
EDIT: Just slowed down a ton. Didn't seem to stop but went from 200kb/sec for the first 40 minutes to 40 kb/sec. Might take longer than expected.
Guess I should reply instead of edit so post refreshes.
Google drive mirror link in post above this one.
Bsanborn said:
Says 25 minutes. I have 1 gbps up so it should take no time to upload to google drive.
EDIT: Just slowed down a ton. Didn't seem to stop but went from 200kb/sec for the first 40 minutes to 40 kb/sec. Might take longer than expected.
Left and came back. MD5 matches. Here's mirror: https://drive.google.com/file/d/0B8ZjpnCJKuXzWlBnMFMzbHJWRkk/view
Click to expand...
Click to collapse
Thanks for thiss.. Btw can u xplain how to flash rom with working fp .. In simple lang
neelsolanki said:
Thanks for thiss.. Btw can u xplain how to flash rom with working fp .. In simple lang
Click to expand...
Click to collapse
No idea. I just hosted the mirror, don't plan on flashing it. I'm holding out for CM13.
neelsolanki said:
Thanks for thiss.. Btw can u xplain how to flash rom with working fp .. In simple lang
Click to expand...
Click to collapse
I think u forgot to remove security in link bro
---------- Post added at 08:13 AM ---------- Previous post was at 08:13 AM ----------
Bsanborn said:
No idea. I just hosted the mirror, don't plan on flashing it. I'm holding out for CM13.
Click to expand...
Click to collapse
I think u forgt to remove security from gd link
neelsolanki said:
I think u forgot to remove security in link bro
---------- Post added at 08:13 AM ---------- Previous post was at 08:13 AM ----------
I think u forgt to remove security from gd link
Click to expand...
Click to collapse
Says anyone with a link can view. Are you getting an error?
---------- Post added at 01:23 AM ---------- Previous post was at 12:33 AM ----------
Bsanborn said:
Says anyone with a link can view. Are you getting an error?
Click to expand...
Click to collapse
Here, this one should work: https://drive.google.com/folderview?id=0B8ZjpnCJKuXzS2Fma193X0E0MG8&usp=sharing
neelsolanki said:
Thanks for thiss.. Btw can u xplain how to flash rom with working fp .. In simple lang
Click to expand...
Click to collapse
actually FP working is easy.
1--- First flash h20s 1.2 . boot it. Then u must save you fingerprint and password or pattern in that rom .(You cant change pass or pattern after you boot into fymeos)
2--- got to recovery. wipe system,data,cache and dalvik. Then flash flymeos. boot it. Do go to security section. You will get wrong password error.
Now Try. If any error come and ask
Hope i help You.If i help please Hit the Thanks Button
Mehul.S said:
I'll provide you a Google drive link in some time.. Can you please tell me would this work with DualBoot patcher??
Edit I can't get the file downloaded..
Click to expand...
Click to collapse
Actually with dualboot it must work. but u must be running H20s as primary. i will comfirm it later. But from logic it must work.
and also if you use in dualboot you wont be able to use the security section in rom (I mean you wont be able to change password in flymeos)
Getting GSM network disconnect, lag (more than on OOS), had to remove SetupWizzard apk from system/app to get device in homescreen. Overall nice rom, but i would not use it as daily driver. FP, LA working fine.
acmerw said:
Getting GSM network disconnect, lag (more than on OOS), had to remove SetupWizzard apk from system/app to get device in homescreen. Overall nice rom, but i would not use it as daily driver. FP, LA working fine.
Click to expand...
Click to collapse
Hope you have no read OP. you must not use dual sim while booting. lag wont be ther if you did everything properly. btw home button lag will be there if you need FP scanner. Anyway fix will come soon . An try a custom kernel.report if working. use AK v23 oos version. AK v21 oos will be better
for me no sim network..nor any notification tone for whats app ?? tried through wifi
jjbro007 said:
Hope you have no read OP. you must not use dual sim while booting. lag wont be ther if you did everything properly. btw home button lag will be there if you need FP scanner. Anyway fix will come soon . An try a custom kernel.report if working. use AK v23 oos version. AK v21 oos will be better
Click to expand...
Click to collapse
I'm using single sim, still lags as hell. On H2OS custom kernel breaks camera functionality.
acmerw said:
I'm using single sim, still lags as hell. On H2OS custom kernel breaks camera functionality.
Click to expand...
Click to collapse
Ok i am finding the reason behind it. $g users in chinese site said about lag. 2g have no lag i guess. change to 2g and try.
Related
CM12 with Cellular Data Fix - Android 5.0 - Unofficial Port - Redmi Note 4G
Firstly, this is not a flashable zip from receovery. This is a fully working ROM from TWRP backup. I tried to make it flashable zip but somehow didnt succeed and also didnt get time to work further. I will do it when I get little free time.
Instructions:
1. MUST HAVE TWRP RECOVERY ON YOUR DEVICE
2. Download the ROM on your computer and extract it.
3. Copy the extracted ROM to your sd card > TWRP > Backup folder
4. Wipe system, data, cache and dalvik cache
5. Restore > Select the copied ROM backup from SD card.
This includes GAPPS as well. Other addons you can flash as you want from other sources. As per my usage can be used as daily driver if you want change from MIUI and want to see lollipop in your Redmi Note 4G.
Data FIX:
I have included a script that needs to be executed when you toggle/enable mobile data.
1.) Toggle/enable mobile data
2.) After a min hit the "Data on: widget in home screen. You will get an IP address and data must work flawlessly!
If you get Invalid IP address, hold on for a min and hit data on widget again until you get IP address. Network takes few seconds to assign IP.
Note: If you do not want widget on home screen, you have to go to gscript and run the data on script when you toggle mobile data.
If you use another launcher, just add widget of gscript to home screen, it will ask for the script, point it to gscript.
If anyone can make it as flashable zip, you are most welcome. Please upload and give me link to add to this first post.
Download: http://1drv.ms/1aPxvin
Any updates and additions are most welcome. Please post your views after trying this.
Credits: To the original developer. I just ported it.
So, camera and mobile data problems fixed?
how about camera and mobile data network??i think that's a big problem in cm 12 for now..
Its weird nowadays. That the common bugs hasn't being solved, but, some blokes kept posting new "ROMS" even though its not new. Just being ignorance, or just want to post things in XDA forum.
Mayoz said:
how about camera and mobile data network??i think that's a big problem in cm 12 for now..
Click to expand...
Click to collapse
Jamil69 said:
So, camera and mobile data problems fixed?
Click to expand...
Click to collapse
joeffery.sylvester said:
Its weird nowadays. That the common bugs hasn't being solved, but, some blokes kept posting new "ROMS" even though its not new. Just being ignorance, or just want to post things in XDA forum.
Click to expand...
Click to collapse
Assuming that OP wrote "This is a FULLY Working Rom" in the red lines, I think it should work. Anyway camera is just google camera, might try using another camera app. The biggest problem is Mobile Data connection.
if someone tested..please replay..
Just tested this ROM..after I restored it..it show 3g mobile connection.. but I just can't connect to any website LOL and camera force close..now I'm back to mokee ROM and I think this ROM isn't ready yet for daily use.
Question About Porting...
RedMi Note, Officially Arrives To JB...
How Did LP Boot?
And If It Not Costs Much Time...
Can You Explain Me How To Port-It To My Device (A Little Help, Not A Complete Guide )?
The Chinese developer just release a new update to cm12 ...data connection working but not stable..and camera still not working
sks93 said:
The Chinese developer just release a new update to cm12 ...data connection working but not stable..and camera still not working
Click to expand...
Click to collapse
Nice! But, is he provide any download link? Checked his weibo, but, he didn't provide new link. Hopefully, he will manage to fix it.
joeffery.sylvester said:
Nice! But, is he provide any download link? Checked his weibo, but, he didn't provide new link. Hopefully, he will manage to fix it.
Click to expand...
Click to collapse
I think he only provide download when he thinks that the ROM is ready for daily usage and all function is working
Got work around for data!
after spending some good amount of time I managed to get a work around for mobile data(both 2g and 3G) that's working well. I'll upload my rom tomorrow.
data fix work around rom uploaded
shining_sk said:
after spending some good amount of time I managed to get a work around for mobile data(both 2g and 3G) that's working well. I'll upload my rom tomorrow.
Click to expand...
Click to collapse
Upadated link in OP with data fix work around.
shining_sk said:
Upadated link in OP with data fix work around.
Click to expand...
Click to collapse
There is a main thread about flashable CM12 with working Data but camera still not working..
official dior?
what works and what doesnt?
can OP specify those? TQ
edwardng said:
what works and what doesnt?
can OP specify those? TQ
Click to expand...
Click to collapse
The latest version has everything working except for camera.
Does it support xposed installer?
This is an old post, please, refer to this one for new updates, this is here only for historical purposes
http://forum.xda-developers.com/note-4/snapdragon-dev/unofficial-cm13-0-910f-g-t3280529
Quite a few people asked for test driving CM13.0/marshmellow. However since a lot of stuff was broken, we felt it didnt make much sense to put a flashable ROM out there. But a lot of progress has been made and the basic functionality (more or less) seems to work now, so I thought let's open a thread where people can dump their unofficial Cm13.0 versions for others to try.
If you want a stable version, use the official Cm12.1: http://forum.xda-developers.com/note-4/orig-development/official-cm12-910f-910g-t3046965
This thread will be active untill we feel it's stable enough to make it official.
XDA:DevDB Information
Unofficial CM13.0 910F/G, ROM for the Samsung Galaxy Note 4
Contributors
gekkehenkie11, fattire
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2015-11-07
Last Updated 2015-11-07
Notes:
1) Make sure you are on COI3 bootloader and modem
Installation instructions:
1) You'll probably want to backup your exisiting installation with TWRP
2) Do a full factory reset
3) Flash this ROM:https://mega.nz/#!LcYkjDgA!e_wG4Cn0hoLeZOy6hHsSUeuOfKuPcxsY-QXnngP7F7o
4) Flash these blobs https://mega.nz/#!CFxUBDxb!QET17v0B-1ana-VQ_EnGzH7RnUZ-vyCHGaGVdV6Ih6M
5) Flash these gapps: https://www.androidfilehost.com/?fid=24052804347844834
If other people upload a ROM, you most likely do NOT have to flash blobs. I just have it seperately but in my next ROM it will probably be included too. So if somebody posts a ROM, all you need is that ROM and gapps.
If you want to build it yourself, @fattire wrote this wonderful tutorial: http://forum.xda-developers.com/not...-910f-910g-t3046965/post63488099#post63488099
Other notes:
* You guys might want to try the Marshmellow multi window mode ! Enable it in the developer options. Once enabled, go to the recent apps and press the symbol next to the X for windows you want.
* You'll probably want to enable MTP over USB by default, also in developer options
* Enable root also, again, via developer options.
Known bugs/problems
* Finger print scanner is not up yet (we'll give it a shot soon)
* I've seen some battery drains, not sure if they still persist, I expect they do.
* NFC not working
* Probably a lot more
KEEP IN MIND THAT THIS IS STILL HIGHLY EXPERIMENTAL AND NOT MEANT TO BE A DAILY DRIVER FOR THE AVERAGE USER AT THIS POINT
*reserved*
I can't wait to test it, thank you both
Thanks gekke. Just not blobs to DL but Gapps .
BTW, while installing myself, I got a FC error regarding the play services. After a reboot it worked fine though. Keep in mind that this still is far from stable But I'm using it as a daily driver myself already
Great to have this!!!
itskapil said:
Great to have this!!!
Click to expand...
Click to collapse
Enjoy ! And dont forget to try the Marshmellow multi window mode, see 1st post
Just found that screen won't turn off during call, otherwise is great
Downloading now, thanks @gekkehenkie11
Did I just mentioned how awesome this is, great job
can't flash cm13. It just restarts TWRP. N910f.
Motawa88 said:
can't flash cm13. It just restarts TWRP. N910f.
Click to expand...
Click to collapse
You did do a factory reset as described in the first post?
Wow cm13 is so so awesome, super-fast , couldnt get mobile data and apn settings crashed on 910G (COH4) ,Patiently waiting for it.
. Anyhow thanks for the awesome work guys ??
gekkehenkie11 said:
You did do a factory reset as described in the first post?
Click to expand...
Click to collapse
of course. It says no md5, skipping and then crash/reboot TWRP.
or do i have to do a complete restore via odin(with stock rom)?
Motawa88 said:
of course. It says no md5, skipping and then crash/reboot TWRP.
or do i have to do a complete restore via odin(with stock rom)?
Click to expand...
Click to collapse
I think when it complains about md5 that either it wasn't downloaded correctly or wasn't copied correctly to your phone
Motawa88 said:
of course. It says no md5, skipping and then crash/reboot TWRP.
or do i have to do a complete restore via odin(with stock rom)?
Click to expand...
Click to collapse
Maybe a corrupted download , because it flashes just fine here on TWRP
Senthil360 said:
Maybe a corrupted download , because it flashes just fine here on TWRP
Click to expand...
Click to collapse
It worked after recopying it.
---------- Post added at 09:41 PM ---------- Previous post was at 09:29 PM ----------
what about Google Now on Tap? long pressing home just opens recents.
I think there is some battery drain caused by the cellular network always trying to find LTE, since you're not in LTE area and can't select wcdma/gsm only
---------- Post added at 08:56 PM ---------- Previous post was at 08:41 PM ----------
Motawa88 said:
It worked after recopying it.
---------- Post added at 09:41 PM ---------- Previous post was at 09:29 PM ----------
what about Google Now on Tap? long pressing home just opens recents.
Click to expand...
Click to collapse
I think now on tap is not working yet
Won't work on the N910W8 model. Error executing updater binary. FYI for those that wanted to try this with that model.
mikimadm3 said:
I think there is some battery drain caused by the cellular network always trying to find LTE, since you're not in LTE area and can't select wcdma/gsm
Click to expand...
Click to collapse
Cellular standby drains battery, something not good there indeed.
So This is first Miui Dev Rom based on Marshmallow...
All Thanks to original DEV THOR TIGER.... and Kuma sir for cm13
In latest Build google keyboard added. And now No more chinese apps
Whats Working..
1. Ril
2. wifi
3. camera
4. Bluetooth
5. LTE and VoLTE
6. LED
7.GPS(not tried)
8.Sensors
9. Audio
10. Video recording
11. Camera
Whats not working
1. network signal not showing. But Some Users are getting Sim Loaded.
2. Video calling on VoLte
3. Swapping Data sim card gives reboot. And then it gets bootloop. Then go to recovery and just dirty flash the MIUI MM 2 rom zip again and it will get fine.
you tell more
DOWNLOADS
MIUI Marshmallow THIRD
MINIMAL A-Gapps
How to flash
1. Download Miui_MM_3_Redmi2.zip and a-gapps package.
2. Reboot to twrp recovery
3. make backup of current rom
4. Now wipe data, cache, system and dalvik cache
5. now flash Miui_MM_3_Redmi2.zip and a-gapps
6. when flashing completes reboot to system
7. wait till rom boots, and it will take some time to load miui 8 setup.
Note. It shows no sim card...but dont worry it is fine. Sims are loaded properly ...
for Volte and data you need to set APN in setting.
Note2- Only for porters. If anyone is trying porting and editing chinese rom...and you want to delete chinese apps...you only need to delete superSU zip in rom. Chinese devs are containing their chinese app in SuperSu zip.
SOURCES
1. Kernel Source--https://github.com/CyanogenMod/android_kernel_wingtech_msm8916 (BlackHawk Kernel)
2. Vendors--https://github.com/TheMuppets/proprietary_vendor_wingtech
Credits:
@ketut.kumajaya, Thor Tiger, Me
If someone is missed...just tell me i will add.:fingers-crossed....:fingers-crossed:
Congratulations to your work. Is it supporting multiwindow like cm13
Wow miui skin in cm thanks to your innovative idea
Thread Updated with Download link......
Keyboard Not Showing
Keyboard is not working/showing on First Setup. Im using Spanish. Thanks in advance.
ShainaGlowy said:
Keyboard is not working/showing on First Setup. Im using Spanish. Thanks in advance.
Click to expand...
Click to collapse
oh srry i forgot to mention....keyboard is removed because it was chinese and i didnt added any other keyboard to reduce rom size....
you can skip skip setup...and then install any keyboard apk from backup and then enable it ....
it will work fine...
thank you for reminding me....
saurabh1234 said:
oh srry i forgot to mention....keyboard is removed because it was chinese and i didnt added any other keyboard to reduce rom size....
you can skip skip setup...and then install any keyboard apk from backup and then enable it ....
it will work fine...
thank you for reminding me....
Click to expand...
Click to collapse
I cant skip setup because in my previous miui rom i was signed in....so it asks me to type in my password stating this device was signed in using an account.
Im in love with this rom it was kind of my dream...please help
aishik2015 said:
I cant skip setup because in my previous miui rom i was signed in....so it asks me to type in my password stating this device was signed in using an account.
Im in love with this rom it was kind of my dream...please help
Click to expand...
Click to collapse
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
saurabh1234 said:
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
Click to expand...
Click to collapse
Thank you for your fast response sir.
I will try it.
You might want to add this to the notes too for other people who might have the same problem
saurabh1234 said:
i was also signed in..but i didnt get this and i skipped setup.
Now go in this below link and download Google keyboard for arm device.
Dont download arm64 .....
and then flash it...it should work...
http://forum.xda-developers.com/mot...-updated-emoji-installer-android-6-0-t3265785
Click to expand...
Click to collapse
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
aishik2015 said:
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
Click to expand...
Click to collapse
ok...i will do something...
now i am travelling...
till then can you try one thing...
restore your old miui backup and turn off find device...
use that miui for 10-30 min with data ON
then flash this rom...
and then check is it saying same...
aishik2015 said:
It didn't work.
Force closing.
Can't use your rom.
Sad me :'(
Click to expand...
Click to collapse
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
based on kuma kernel or jerrica ?
saurabh1234 said:
ok...i will do something...
now i am travelling...
till then can you try one thing...
restore your old miui backup and turn off find device...
use that miui for 10-30 min with data ON
then flash this rom...
and then check is it saying same...
Click to expand...
Click to collapse
Will I dirty flash this ROM or after wiping ?
---------- Post added at 10:37 AM ---------- Previous post was at 10:36 AM ----------
saurabh1234 said:
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
Click to expand...
Click to collapse
I tried this in the beginning it didn't work
saurabh1234 said:
try this one also....
http://forum.xda-developers.com/mot...peria-keyboard-6-7-0-90-lastest-cm12-t3222712
Click to expand...
Click to collapse
Do something please.
aishik2015 said:
Do something please.
Click to expand...
Click to collapse
i m on vacation..u need to wait for 10-15 days
zieruchan said:
based on kuma kernel or jerrica ?
Click to expand...
Click to collapse
kuma
ROM Looks great. But have some doubt
1) is this based on lollipop firmware?
2) does this make worse experience in 1gb ram phone? Like miui LP ROM.
I hope that network indication is fixed soon...thx
@saurabh1234 I wanna know a few thing before going to see it in action.
1. Is original MIUI framework is included in this ROM? Means will it support MIUI themes?
2. What is the structure of the zip? Does it contain separate data and system image along with all the loaders like MIUI or just the system.img like most other CM ROMs?
3. What about OTA and update stuff?
iamsubhranil said:
@saurabh1234 I wanna know a few thing before going to see it in action.
1. Is original MIUI framework is included in this ROM? Means will it support MIUI themes?
2. What is the structure of the zip? Does it contain separate data and system image along with all the loaders like MIUI or just the system.img like most other CM ROMs?
3. What about OTA and update stuff?
Click to expand...
Click to collapse
1. yes miui themes working... I tried only 2-5 themes...
2. It is a dirty port taking cm13 as base. So it is not containing data and system seperate images or .dat file...
It is having file system same as KK rom zip files.
3. Ota will not work.
Hello you all developers how are you.
Recently I was using Oppo F1S That device had a battery daring problem I sold that out.Now I am using Redmi Note 4.
But I found ColorOS 3.0 is aowsome look like iOS so I request you to best developers in the world to port ColorOS 3.0 for RN 4.
Ahhm someone already using this check it out.
But we need world's best developers checked OS.
It is in Chinese I can't get what is it
Check it out
Web:::
http://www.miui.com/forum.php?mod=v...ilter=typeid&typeid=5935&typeid=5935&mobile=2
Abubakar Wander said:
Hello you all developers how are you.
Recently I was using Oppo F1S That device had a battery daring problem I sold that out.Now I am using Redmi Note 4.
But I found ColorOS 3.0 is aowsome look like iOS so I request you to best developers in the world to port ColorOS 3.0 for RN 4.
Ahhm someone already using this check it out.
But we need world's best developers checked OS.
It is in Chinese I can't get what is it
Check it out
Web:::
http://www.miui.com/forum.php?mod=v...ilter=typeid&typeid=5935&typeid=5935&mobile=2
Click to expand...
Click to collapse
Lol.... What a post...??
---------- Post added at 07:57 PM ---------- Previous post was at 07:49 PM ----------
Here u go. Website translated in English...
https://translate.googleusercontent...bile=2&usg=ALkJrhjIi8G2SUvWNPxtHzbDD0QRyL25rA
Can someone mirror it to google driver or something?
If that's the same zip, which has been released on xda (Thread closed for now), do not install it as ColorOS Installation makes some of sensors to fail. So, better stick to Miui or flash a custom Rom or whatever you want, but do not install colorOS.
This ROM is for (mido), your mobile phone is MediaTek or Qualcomm 625? If you are MediaTek you can not install this ROM!
I am from MIUI China Forum
i download and install but stuck on Oppo boot logo i have 4GB Mido version any onle please help or any developer please make it
or all.
here is mirror link https://www.mediafire.com/?ejqhwc5njgaa2ai
For me sensor is working no issue at all
You need to format data after install the rom to not make your phone bootloop
Tested on my phone mido 3 gb
akino553 said:
For me sensor is working no issue at all
You need to format data after install the rom to not make your phone bootloop
Tested on my phone mido 3 gb
Click to expand...
Click to collapse
working only 3gb version my friend have it its working on his mobile but not my
i install properly
anyone try on 4GB version
rashmi0733 said:
working only 3gb version my friend have it its working on his mobile but not my
i install properly
anyone try on 4GB version
Click to expand...
Click to collapse
had a quick testing... everything is working no major bugs...
some highlights-
RIL
VoLTE
Google apps supported(u just need to install google play services one time)
camera is awesome
great battery backup
very less bloatware (can b removed easily)
hope it helped
plz give a thumps up if helpful....
No volte ?
how to get Google play services?
Otherwise no problem.
Anybody has any solutions?
drmuruga said:
how to get Google play services?
Click to expand...
Click to collapse
Download and install OpenGAPPs "pico". Make sure you download the installer for the correct Android version.
nicks.1106 said:
had a quick testing... everything is working no major bugs...
some highlights-
RIL
VoLTE
Google apps supported(u just need to install google play services one time)
camera is awesome
great battery backup
very less bloatware (can b removed easily)
hope it helped
plz give a thumps up if helpful....
Click to expand...
Click to collapse
Plz help give download link I will downloaded from MediaFire it's stucks on opposite boot logo
I can flash color os as secondary in multirom, everything work well, but volte didn't work.
drmuruga said:
I can flash color os as secondary in multirom, everything work well, but volte didn't work.
Click to expand...
Click to collapse
U have to activate volte in setting->call
drmuruga said:
No volte ?
how to get Google play services?
Otherwise no problem.
Anybody has any solutions?
Click to expand...
Click to collapse
Volte is there buddy...u just need to activate it...
And install Google play services apk file...that's it
Sahil132 said:
Plz help give download link I will downloaded from MediaFire it's stucks on opposite boot logo
Click to expand...
Click to collapse
Follow these steps to successfully flash the ROM...
nicks.1106 said:
U have to activate volte in setting->call
Click to expand...
Click to collapse
Thanks a lot.
---------- Post added at 08:14 PM ---------- Previous post was at 08:14 PM ----------
nicks.1106 said:
Volte is there buddy...u just need to activate it...
And install Google play services apk file...that's it
Click to expand...
Click to collapse
Thanks a lot.
Installation Step By ""nicks.1106""
1.wipe everything (system, cache,data)
2.flash cm13 firmware
3.flash cm13( do not boot)
4.flash color os
5.(optional) if u r facing sensor bugs then flash the sensor fix zip...
6.thats it
Note:- i formated my data(intern memory) before so that I can remove password on booting... sometimes this causes bootloop...
So if u have this password on boot, then better backup ur important stuff and format ur internal memory...
Link Sensor Fix https://www.mediafire.com/?7uyfg885efc7h25
wow! color os without google is very nice experience. i can use facebook, whatsup ,chrome etc also. any possibility to register in oppo ?
flash miui 8.2 firmware, flash color os as secondary in multirom (quark os is primary) ,reboot,im not format data( but first time when i flash as primary ,formatted data also ).No google services. Backup account is only needed.
Do i really have to install cm13 first? Im aware of failing sensors but i just wanna try it out
Android 10 is here!
Took a while, but here's Lineage 17.1 builds, based on Android 10.
Everything should work AFAIK, but let me know if something doesn't.
If you run into problems installing Gapps, you might need an updated
TWRP build. It needed a change to support the new system-as-root
in Android 10. If the official TWRP builds doesn't have it yet, there's
links below of some builds I did.
For root, use Magisk: https://forum.xda-developers.com/apps/magisk
If you are doing backups of 17.1 with TWRP, and wants to restore one of these backups,
you need to flash this right after restoring, or otherwise the boot will hang: http://www.mediafire.com/file/a454nnpp8l7afbr/fix_rootfs_label.zip/file (Needed only for older TWRP, and not for the one linked to below)
Download:
GT-I9190: https://www.mediafire.com/file/ewdbbg757ujbc3r/lineage-17.1-20220816-UNOFFICIAL-serrano3gxx.zip/file
GT-I9192: https://www.mediafire.com/file/a0ya2fdcf0drjt1/lineage-17.1-20220817-UNOFFICIAL-serranodsdd.zip/file
GT-I9195: https://www.mediafire.com/file/3ky5...7.1-20220816-UNOFFICIAL-serranoltexx.zip/file
SPH-L520: https://www.mediafire.com/file/l0le....1-20220817-UNOFFICIAL-serranoltespr.zip/file
SCH-R890: https://www.mediafire.com/file/cqxl....1-20220817-UNOFFICIAL-serranolteusc.zip/file
Recovery (TWRP):
GT-I9190: https://www.mediafire.com/file/e42oml5716ekvk7/twrp-3.6.2_9-0-serrano3gxx.img/file
GT-I9192: https://www.mediafire.com/file/2plk5azmfxwsm5z/twrp-3.6.2_9-0-serranodsdd.img/file
GT-I9195: https://www.mediafire.com/file/wtsopyh3rmfoatf/twrp-3.6.2_9-0-serranoltexx.img/file
SPH-L520: https://www.mediafire.com/file/iw68mr671fgftnb/twrp-3.6.2_9-0-serranoltespr.img/file
SCH-R890: https://www.mediafire.com/file/417w6vp0m338fb0/twrp-3.6.2_9-0-serranolteusc.img/file
Link to all builds:
GT-I9190: http://www.mediafire.com/folder/4kjlyp6v2lfnh/lineage-17.1
GT-I9192: http://www.mediafire.com/folder/hw7l5hqe0fv1m/lineage-17.1
GT-I9195: http://www.mediafire.com/folder/3911mczazsvdt/lineage-17.1
Download Gapps: https://opengapps.org/?api=10.0&variant=pico
Sources:
https://github.com/LineageOS/android_kernel_samsung_msm8930-common
https://github.com/LineageOS/android_device_samsung_msm8930-common
https://github.com/LineageOS/android_device_samsung_serrano-common
https://github.com/LineageOS/android_device_samsung_serrano3gxx
https://github.com/LineageOS/android_device_samsung_serranodsdd
https://github.com/LineageOS/android_device_samsung_serranoltexx
https://github.com/arco/android_device_samsung_serranoltespr
https://github.com/arco/android_device_samsung_serranolteusc
Cellular not working on the 9192? Upgrade your baseband: https://forum.xda-developers.com/t/modem-odin-stopped-samsung-galaxy-s4-mini-duos-i9192.2768593/
Thanks arco <3
Thanks :good: arne everything working on I9192
Arslan140 said:
Thanks :good: arne everything working on I9192
Click to expand...
Click to collapse
Is it working for you???? because i try but failed... Recovery img dont work....he stoped and no recovery no boot rom...
khatir bahri said:
Is it working for you???? because i try but failed... Recovery img dont work....he stoped and no recovery no boot rom...
Click to expand...
Click to collapse
Both Rom and Recovery Works for me on my I9192
Maybe your download get corrupt
Root is not working though as arne said
i tried to patched boot.img for magisk but it did not work either
little things that i notice So far
1st when creating QR code or Scan QR code for wifi(Android 10 feature) Settings Got Crash
2nd conditions/Summaries that shown on the top section of the settings like turn on mobile data,your phone is on silent..etc There is no way to dismiss that on previous versions you can swype to dissmiss that
Everything seem to be working well in here
And here is some screenshots for ya
And another thing I installed the rom and the gapos with the latest official TWRP and not Arco's one
Hello,
thanks for your work.
Sadly there are some ugly and heavy bugs, escpecially regarding some hardware
related things.
Bluetooth Audio stutters and cause the whole system ui to get laggy and also
some force closes can happen. Audio streaming is not possible.
Wifi Direct is not working anymore.
Memory leaks appear.
And so on..
After some hours of intensive and frustrating testing i went back to stock rom
where i never encounter such issues.
Im using the phone at home without any simcard just for audio streaming from
my nas to my hometheatre-system.
Best regards.
Dear arco68 ! What about magisk ?
---------- Post added at 12:26 PM ---------- Previous post was at 11:54 AM ----------
It is not possible to send sms directly from the app ,you have to choose a sim to send sms in the "Network and Internet" settings"
Arslan140 said:
1st when creating QR code or Scan QR code for wifi(Android 10 feature) Settings Got Crash
Click to expand...
Click to collapse
Will be fixed in next build.
Jaroslav.100 said:
Dear arco68 ! What about magisk ?
Click to expand...
Click to collapse
Google magisk and system-as-root. It's not a straight forward thing in Android 10, due to the bootimage is not containing a real ramdisk anymore. As far as I could figure out, you have to patch the recoveryimage, and boot to recovery in order for magisk to load. When booting this patched recoveryimage, magisk will boot into the normal system unless you keep the hardware keys pressed all until recovery is loaded. It's all a bit messy, and I could not get this to work though. If anyones gonna mess with this, be sure you have backups, in case normal boot gets broken.
It is not possible to send sms directly from the app ,you have to choose a sim to send sms in the "Network and Internet" settings"
Click to expand...
Click to collapse
Dual SIM? Probably some stuff are not implemented yet for this.
Thank you arco, we will wait for your updates !
@arco68 is our devices can install the GSI roms or nah ?
Ala Ghanmi said:
@arco68 is our devices can install the GSI roms or nah ?
Click to expand...
Click to collapse
No
Ala Ghanmi said:
And another thing I installed the rom and the gapos with the latest official TWRP and not Arco's one
Click to expand...
Click to collapse
I've also got it right first time on my GT-I9195 with the official TWRP 3.3.1-0
Diresh said:
No
Click to expand...
Click to collapse
Okay get it
---------- Post added at 08:22 AM ---------- Previous post was at 08:21 AM ----------
Claudio4780 said:
I've also got it right first time on my GT-I9195 with the official TWRP 3.3.1-0
Click to expand...
Click to collapse
That's nice
Is network is working fine for both sim , because previously linage os 16 have issue
omgitsavinash said:
Is network is working fine for both sim , because previously linage os 16 have issue
Click to expand...
Click to collapse
Both Sims are working fine
I installed this ROM on my test device. It all works very well. The only problem I noticed was like @franticfreddy said, the Bluetooth audio doesn't work right.