Your device is corrupt. It can't be trusted and may not work properly - Nexus 6P General

Your device is corrupt. It can’t be
trusted and may not work properly.
Visit this link on another device:
go.co/ABH
Problem:
This is the ultimate warning, and you likely don’t want to see this message show up on your screen. Shall this appear, it would mean your device is not safe to use, not trusted and/r corrupted. The OS could still work, but there’s high chances you will encounter performance and security issues.
Consequence:
Before your device begins to start it will be shown:
Android system
There’s an internal problem with your device. Contact your manufacturer for details nexus 6p
Also:
The camera may be no longer properly work
Fixxed:
fastboot flash bootloader bootloader-angler-angler-xx.xxx.img
fastboot reboot-bootloader
fastboot flash radio radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash recovery recovery.img
fastboot flash boot boot.img
mfastboot flash system system.img
reboot bootloader
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot reboot-bootloader
fastboot reboot-bootloader
fastboot flash vendor vendor.img
Important:
fastboot flashing lock_critical
Enjoy!

---

@tlip
A couple of notes. You should never advise anyone to flash the userdata.img, it'll result in the minimum commercially available storage size (32gb) being allocated to the device regardless of the actual storage size. So flashing userdata is only compatible with 32gb devices. The correct way to wipe/format the userdata is with this command:
Code:
fastboot format userdata
Also, bootloader reboots are only required after flashing the bootloader and the radio, so the sequence should be like this:
Code:
fastboot flash bootloader bootloader-angler-angler-xx.xxx.img
fastboot reboot-bootloader
fastboot flash radio radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash vendor vendor.img
fastboot format userdata
fastboot reboot
And one more thing, you need to take more care when typing these instructions, you made a few errors, I'll highlight them:
Code:
fastboot flash bootloader bootloader-angler-angler-xx.xxx.img
fastboot reboot-bootloader
fastboot flash radio radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash recovery recovery.img
fastboot flash boot boot.img
[Color=red]m[/color]fastboot flash system system.img [Color=blue](extra m at beginning of command)[/color]
[Color=red]reboot bootloader[/color] [Color=blue](missing "fastboot" prefix, and hyphen between reboot and bootloader (fastboot reboot-bootloader))[/color]
fastboot flash cache cache.img
[Color=red]fastboot flash userdata userdata.img[/color] [color=blue](incorrect command as outlined above)[/color]
[Color=red]fastboot reboot-bootloader[/color] [Color=blue](unnecessary)[/color]
[Color=red]fastboot reboot-bootloader[/color] [Color=blue](another one?)[/color]
fastboot flash vendor vendor.img

---

I have that message when rebooting. Is this something I should be concerned about? My ignorance had me believing this was a standard screen for all unlocked bootloaders.

---

sandfreak said:
I have that message when rebooting. Is this something I should be concerned about? My ignorance had me believing this was a standard screen for all unlocked bootloaders.
Click to expand...
Click to collapse
Yes its a standard thing when you unlock b/l, I have it too. I think its just a security measure by Google. Relock b/l and the message should go.
Also you can just lock it with fastboot flashing lock, no need for the critical step unless you unlocked the b/l in the same way. Critical is only if you want to flash a custom bootloader, I believe.
EDIT: This info only applies for "Bootloader MAY BE Corrupt" and not "IS Corrupt". Different situation from the OP

---

Thanked @Heisenberg
Please OP, you give instructions that you expect people to follow and if they type in the wrong info could be fatal...

---

Seriously, this thread needs closed asap. All the above info( besides Heisenberg) is careless in itself, let alone posting it for others. Stop....just stop. Smh

---

Heisenberg said:
@tlip
A couple of notes. You should never advise anyone to flash the userdata.img, it'll result in the minimum commercially available storage size (32gb) being allocated to the device regardless of the actual storage size. So flashing userdata is only compatible with 32gb devices. The correct way to wipe/format the userdata is with this command:
Click to expand...
Click to collapse
I have for sure made this mistake before... One lesson learned the hard way

---

Dissmeister said:
Yes its a standard thing when you unlock b/l, I have it too. I think its just a security measure by Google. Relock b/l and the message should go.
Also you can just lock it with fastboot flashing lock, no need for the critical step unless you unlocked the b/l in the same way. Critical is only if you want to flash a custom bootloader, I believe.
Click to expand...
Click to collapse
I was under the impression that it was a bad idea to re-lock the BL after flashing. Something about not being able to flash stock images anymore? Whats the official word on this?

---

CNLiberal said:
I was under the impression that it was a bad idea to re-lock the BL after flashing. Something about not being able to flash stock images anymore? Whats the official word on this?
Click to expand...
Click to collapse
That's exactly right, locking the bootloader means you can't flash anything to the device.

---

CNLiberal said:
I was under the impression that it was a bad idea to re-lock the BL after flashing. Something about not being able to flash stock images anymore? Whats the official word on this?
Click to expand...
Click to collapse
Your post made me google this and I did find some people who did have issues like that, though they mention they cant unlock again. If this is what you're talking about, I'd say its a device specific issue; technically as far as Nexus (or correct flashing protocol) is concerned, you should be able to unlock and re-lock as you see fit. As Heisenberg mentioned, you cant flash anything on a locked b/l in the first place.
Personally I've never seen a reason to relock b/l after unlock but it depends on your circumstances.

---

Dissmeister said:
Yes its a standard thing when you unlock b/l, I have it too. I think its just a security measure by Google. Relock b/l and the message should go.
Also you can just lock it with fastboot flashing lock, no need for the critical step unless you unlocked the b/l in the same way. Critical is only if you want to flash a custom bootloader, I believe.
Click to expand...
Click to collapse
Actually if it says your bootloader may be corrupt which is normal. If it says your bootloader is corrupt that's bad. It can say Two different things. He said the second one

---

dontbeweakvato said:
Actually if it says your bootloader may be corrupt which is normal. If it says your bootloader is corrupt that's bad. It can say Two different things. He said the second one
Click to expand...
Click to collapse
That is one hell of a silly mistake. You're right, I apologize for not seeing that earlier. Will fix my previous reply so others dont get the wrong info from it. Thanks for that :good:

---

Dissmeister said:
Your post made me google this and I did find some people who did have issues like that, though they mention they cant unlock again. If this is what you're talking about, I'd say its a device specific issue; technically as far as Nexus (or correct flashing protocol) is concerned, you should be able to unlock and re-lock as you see fit. As Heisenberg mentioned, you cant flash anything on a locked b/l in the first place.
Personally I've never seen a reason to relock b/l after unlock but it depends on your circumstances.
Click to expand...
Click to collapse
The way I understood it, after I re-lock then need to unlock again, the phone will force a wipe. The old app Unlock Bootloder would lock and unlock in Android. You wouldn't have to reboot. I guess the developer believes that the new 6P can't perform this same function due to the nature of new locking/unlocking.

---

Hi Heisenberg,
as being rather new to the topic of unlocking and stuff that means, that I have to follow this (your) sequence for not running into that issue?
Does this hold true also for already having this problem, though?
Cheers, Rovaine

---

Rovaine said:
Hi Heisenberg,
as being rather new to the topic of unlocking and stuff that means, that I have to follow this (your) sequence for not running into that issue?
Does this hold true also for already having this problem, though?
Cheers, Rovaine
Click to expand...
Click to collapse
This "guide" is very poorly written, don't follow the instructions here. If you need instructions you can visit my guide here:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
As long as you're careful and follow my instructions properly you shouldn't haven't this problem.

---

Heisenberg said:
This "guide" is very poorly written, don't follow the instructions here. If you need instructions you can visit my guide here:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
As long as you're careful and follow my instructions properly you shouldn't haven't this problem.
Click to expand...
Click to collapse
Actually, I've tried to follow your guide to the point, but did -obviously- something wrong, hence this issue.
You've got any advice for starting all over -propperly- for getting rid of this issue?

---

I had this issue too after having "dirty flashed" Android 6.0.1 over Android 6.0.
I flashed system.img and boot.img, as usual through fastboot and never had any problems on "older" devices.
On my Nexus 6P I got this error too and the camera did not work. Having checked the logs I found the error.
You need to flash vendor.img too in order to fix it. You don´t have to relock your bootloader.

---

Gorgtech said:
I had this issue too after having "dirty flashed" Android 6.0.1 over Android 6.0.
I flashed system.img and boot.img, as usual through fastboot and never had any problems on "older" devices.
On my Nexus 6P I got this error too and the camera did not work. Having checked the logs I found the error.
You need to flash vendor.img too in order to fix it. You don´t have to relock your bootloader.
Click to expand...
Click to collapse
Just for getting it straight...
Initial situation:
Rooted device, latest Cyanoge installed, showing the described issue
How to solve:
Get angler-xxxxxx-factory-xxxxxxxx, unzip ...
"fastboot flash vendor C:\angler\images\vendor.img"
Gratulation issue solved?
Or do I have to get back to a certain state, like factory image fully restored or alike, of my device?

---

Exactly, you need the latest Factory Image for the Nexus 6P. Extract all content and only flash the vendor.img through fastboot.
Rovaine said:
Just for getting it straight...
Initial situation:
Rooted device, latest Cyanoge installed, showing the described issue
How to solve:
Get angler-xxxxxx-factory-xxxxxxxx, unzip ...
"fastboot flash vendor C:\angler\images\vendor.img"
Gratulation issue solved?
Or do I have to get back to a certain state, like factory image fully restored or alike, of my device?
Click to expand...
Click to collapse

---

Rovaine said:
Actually, I've tried to follow your guide to the point, but did -obviously- something wrong, hence this issue.
You've got any advice for starting all over -propperly- for getting rid of this issue?
Click to expand...
Click to collapse
Flash the factory images, instructions are in my guide.