Hello xda developers, i am new to this forum. Even tho i've used couple of guides from here i wasn't registered. So here is the thing:
My phone is the AT&T variant and is currently running GPe android 6.0 with OTA updates. When i was on sense 6/7 (i dunno) and 5.0.2 lollipop ( being rooted, unlocked, s-off) i was not experiencing any kind of casualties. When i proceeded to install the GPe, everything was perfect. But then i happen to open the camera app (Google's) and it starts making the buzzing noise and cant focus at all. my first thought was, maybe is the camera app. So i installed the latest version of htc one m8 camera and saw that it had the same issues. I'm starting to consider that this is a hardware problem. A friend told me to re-install everything as it was before this happend. Considering doing it but first i would like to ask you guya your opinion.
P.S: the front camera is just fine. The problem is on the rear one.
Change software (back to Sense) to eliminate the possibility that its a software issue.
Much easier than trying to eliminate the possibility of a hardware issue. Only way to do that, would be to replace the camera module.
Besides, if it worked fine on Sense, than suddenly doesn't work on GPE, its pretty suspicious.
It looks like it is a Hardware problem. Went back to sense and still the same problem.
I'm starting to think that this issue might have been triggered by the overheat during the software installation and it's many consecutives updates. It really did overheat a lot.
But anyways, i guess ill send it to someone to check just in case its not just the camera. It also happens to make the same static/buzz sound when i open the flashlight alone.
angel21612 said:
It looks like it is a Hardware problem. Went back to sense and still the same problem.
Click to expand...
Click to collapse
How did you go back to Sense? I'd suggest full RUU to stock, before concluding its not a software issue.
angel21612 said:
I'm starting to think that this issue might have been triggered by the overheat during the software installation and it's many consecutives updates. It really did overheat a lot.
Click to expand...
Click to collapse
What does that mean "overheat a lot"? Folks often think the phone is overheating, when its not even close. It would probably have to burn you to hold it, before it did any actual harm to the electronics. Temps of over 60C (140F) are probably needed to do any damage.
The phone has safeguards that shut it down, well before temps that would cause permanent damage.
Well first of all, i didn't find a full RUU to stock. I used a custom rom. Do you mind leaving a link below so i can download the RUU?
my phones CID and MID are changed too, did it so i could go GPe. i didnt write down anywhere what my old MID and CID. Im just saying because i dont know if it would affect the instalattion process of an official RUU of sense to stock.
And about the heating topic, i don't know if the phone activates those security measures in case of overheating when you're flashing a rom or downloading/installing the updates you get via OTA. I installed the 5.0.1 lollipop (maowdroid's guide from youtube to convert htc one m8 to GPe) so, i had to go through like 3 updates downloads/install and the phone really got hot and never shutdown.
angel21612 said:
Well first of all, i didn't find a full RUU to stock. I used a custom rom. Do you mind leaving a link below so i can download the RUU?
Click to expand...
Click to collapse
Go to the AT&T M8 General section. You'll find my Index thread sticky at the top of that forum section, and in that thread you will find links to every AT&T M8 RUU.
angel21612 said:
my phones CID and MID are changed too, did it so i could go GPe. i didnt write down anywhere what my old MID and CID. Im just saying because i dont know if it would affect the instalattion process of an official RUU of sense to stock.
Click to expand...
Click to collapse
Wrong CID and/or MID will cause the RUU to fail (although SuperCID is fine). Finding the proper CID and MID is not hard, if you just search around the forums.
You can also try the current GPE RUU (and why didn't you just run that in the first place, instead of all the updates?). But my gut tells me to return to true AT&T stock for your device.
angel21612 said:
And about the heating topic, i don't know if the phone activates those security measures in case of overheating when you're flashing a rom or downloading/installing the updates you get via OTA.
Click to expand...
Click to collapse
I see no reason why it wouldn't. Its a basic safety measure, so its probably enforced at all times the phone is powered on. HTC engineers are plenty smart enough to know that updates cause heat.
---------- Post added at 09:26 AM ---------- Previous post was at 09:21 AM ----------
angel21612 said:
i had to go through like 3 updates downloads/install and the phone really got hot and never shutdown.
Click to expand...
Click to collapse
Again, saying the phone "really got hot" is not at all quantitative, and means little. Folks say stuff like this a lot on this forum; and when prompted for more info, its almost always the case that the phone was not even close to any excessive temperature. These devices get warm when under CPU load, all computer devices do. They are designed to tolerate a significant amount of heat, shutoff long before any damage is done, and heat damage is unlikely. As mentioned, it probably would have gotten too hot for you to even hold, before it can cause any actual hardware damage.
I'll be looking forward for a stock sense RUU but there's just something that i don't understand. How come, everyone who fallowed the guide to convert to GPe with OTA updates haven't experienced that problem? And if they do, im sure they were just a few. That's why i think i am more convinced that it could be a hardware issue.
angel21612 said:
I'll be looking forward for a stock sense RUU but there's just something that i don't understand. How come, everyone who fallowed the guide to convert to GPe with OTA updates haven't experienced that problem? And if they do, im sure they were just a few. That's why i think i am more convinced that it could be a hardware issue.
Click to expand...
Click to collapse
Things often don't install correctly when patching by OTA. Especially since user data is retained, and as you mentioned multiple OTA updates. Folks frequently complain about random bugs after OTA updates. Sometimes, these are cleared by doing a factory reset, sometimes not.
RUU is a much cleaner install, and completely wipes/re-writes every single partition (around 41 of them).
Which again, makes me wonder why you did an RUU to an older version GPE, than 3 OTAs; instead of just RUU to Marshmallow GPE.
That's an interesting fact i didn't know. Very good point.
Well, in the end it was not a software problem.
**** me.
I'm facing the same problem right now
same here, phone buzzes/vibrates when torch is activated?? any ideas??
Related
I read a reply in a thread which explained that the current ICS leak runs the CPU full speed, instead of scaling it, whenever the screen is on. This was the member's explanation for why some people notice their phones running hotter than on GB.
Is this true? And to the extent that it is true, is it true of the preceding leaks as well? I guess what I'm wondering is whether this is something that HTC might be hoping to resolve before going live with an OTA.
cpurick said:
I read a reply in a thread which explained that the current ICS leak runs the CPU full speed, instead of scaling it, whenever the screen is on. This was the member's explanation for why some people notice their phones running hotter than on GB.
Is this true? And to the extent that it is true, is it true of the preceding leaks as well? I guess what I'm wondering is whether this is something that HTC might be hoping to resolve before going live with an OTA.
Click to expand...
Click to collapse
Your guess is as good as mine and I too read that same reply. I've been trying to figure this out since the leak came out. Some people aren't having any problems and some people are having all sorts of problems. I haven't been in the Rezound thread long but I'm not new to flashing and I've been going back on forth on doing the leak or waiting for either the source for kernel help or the official ota. I was thinking maybe it was "noob" mistakes but from alot of the posts it seems that experienced flashers are having problems as well. Scott has a kernel thread in the Dev section if you wish to follow that, if you aren't already. I know that all phones are created equal and there are some built better than others. So far I've been pretty fortunate in my phones. I've never had to take a phone in for repair that I didn't eff up myself.... Obviously, I'd like to think by the time we get the official ota all things will be resolved but you never know. When I had my Evo 3D it took the latest ota to solve alot of battery issues that we had. I know I don't answer your question but I too have similar ones myself. Be well.
The current leak/kernel that is having problems is part of a release candidate, we can only hope HTC resolves it before the update is finalized. I wouldn't be surprised if another leak/release candidate shows up in the near future, each one has fixed more issues found in the earlier leaks.
jjwalter--
If I was in your shoes I would not take the leak. My phone is worse than bricked.
I can put the .11 GB kernel back on the phone with my old software, but the WIFI doesn't seem to work with the ICS radio firmware, and the thing's running hotter than ever.
I had no heat or battery life issues on the current GB -- all my problems began when I flashed the .22 leak. And as long as I'm stuck with these radios I don't think they'll get better. Your mileage may vary, but if it was up to me I wouldn't get in that car again.
cpurick said:
djwalter--
If I was in your shoes I would not take the leak. My phone is worse than bricked.
I can put the .11 GB kernel back on the phone with my old software, but the WIFI doesn't seem to work with the ICS radio firmware, and the thing's running hotter than ever.
I had no heat or battery life issues on the current GB -- all my problems began when I flashed the .22 leak. And as long as I'm stuck with these radios I don't think they'll get better. Your mileage may vary, but if it was up to me I wouldn't get in that car again.
Click to expand...
Click to collapse
Thanks for the heads up. From past flashing experience I have never seen a leak with a radio and firmware update. It's usually just a rom. With a leak this close I'm sure the ota isn't too far off and I'll just keep hanging around and root and flash once that drops. Thanks again.
I know if I were HTC/Verizon/ATT/Motorola... I'd be leaking any new builds right here on XDA. You couldn't find a better group of knowledgeable testers anywhere. In my mind, these leaks are on purpose, and I'd also guess there will be future releases that fix the issues the group here has found.
im running the latest leaked version and i have no heat problems whatsoever. i play hd games, on youtube for hours, etc...hottest its gotten was 120 degrees thats it. im running stock. as far as im concerned GB is dead to me
My phone doesn't get hot playing games on the leak, but you put that mofo to stream some music and it about burns through my pants in class, and then half my extended battery is gone. It is definately due to the scaling issue
Yea I see a lot of people saying they have heat and reboot issue but they are the same people asking newb questions if ya wipe everything, check the md5, flash the ruu, and do it right you will not have problems 99% of the time. Don't be afraid to update just because a couple user experience problems its not like some guy in his mom's basement made this leak its a leak from google got out god knows how but still built with their algorithm, software, and knowledgeable engineers. I would update sense 3.6 is way better than 3.5 and ics has a lot more backup options and a better user experience. I recommend you do just make sure to do a backup before you do so you can revert back if need be.
Sent from my ADR6425LVW using XDA
What are the across the board issues with ics at the moment on the rezound? I'm thinking about coming from the bionic/thunderbolt, no Ril and hardware acceleration, etc.
1454 said:
What are the across the board issues with ics at the moment on the rezound? I'm thinking about coming from the bionic/thunderbolt, no Ril and hardware acceleration, etc.
Click to expand...
Click to collapse
There aren't any for me. Runs perfectly on my phone. Everything works the way it should.
a.mcdear said:
There aren't any for me. Runs perfectly on my phone. Everything works the way it should.
Click to expand...
Click to collapse
Yep, I'm with ^ Everything is running top notch for me as well.
What are the bluetooth issues mentioned in the ics rom threads? I saw it said there was one known issue, but didn't specify.
I've heard this came out a couple months ago, but my phone as yet to update on its own. When I try and check for an update, it says there are no updates to be found. And when I check my phone, my current software is 3.14.605.12. Anybody know how I can upgrade to the latest? Ever since I upgraded to ICS, my phone has been nothing but trouble for me, and I'm hoping if I upgrade to the latest that some of these problems might go away. Any help would be much appreciated. Thanks!
HTC Rezound
Completely Stock / No mods
Android 4.0.3
Software 3.14.605.12
Verizon / USA
fcukthenet said:
I've heard this came out a couple months ago, but my phone as yet to update on its own. When I try and check for an update, it says there are no updates to be found. And when I check my phone, my current software is 3.14.605.12. Anybody know how I can upgrade to the latest? Ever since I upgraded to ICS, my phone has been nothing but trouble for me, and I'm hoping if I upgrade to the latest that some of these problems might go away. Any help would be much appreciated. Thanks!
HTC Rezound
Completely Stock / No mods
Android 4.0.3
Software 3.14.605.12
Verizon / USA
Click to expand...
Click to collapse
Here is the link to the global update: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/ Lucky for you, since you haven't unlocked you bootloader or done anything otherwise, you can flash this in your bootloader and get the update with no problem.
Two notes on flashing that...first it's unofficial, so flashing it might risk your ability to get OTA's in the future. Second, it will wipe your data, apps, and internal storage. However, with those two caveats, it will work just fine.
I appreciate the input guys. However, both of you state I need to "flash" to do this - which looks to me (as stated above) it's an unofficial method of getting this update. I'm curious, is there a way I can do this a legit way? How come my phone did not take the update, while others did? How can I force my phone to update? I'd like to keep my phone as stock as possible and not do any modding to it.
If I really have no other options, then I guess flashing is my best bet. And considering the last phone I had that I took any time to mod was the first-gen iPhone, I have no clue what any of this lingo means - but I guess that's what Google is for. However if any of you have a quick link in mind you could post that might help me or at least point me in the right direction, it'd be appreciated. I looked at the link posted above to the actual ROM file and it has some simple install instructions, however I'm not sure if that's all I need to do considering I'm still fully stock. Thanks again guys for all your help.
fcukthenet said:
I appreciate the input guys. However, both of you state I need to "flash" to do this - which looks to me (as stated above) it's an unofficial method of getting this update. I'm curious, is there a way I can do this a legit way? How come my phone did not take the update, while others did? How can I force my phone to update? I'd like to keep my phone as stock as possible and not do any modding to it.
If I really have no other options, then I guess flashing is my best bet. And considering the last phone I had that I took any time to mod was the first-gen iPhone, I have no clue what any of this lingo means - but I guess that's what Google is for. However if any of you have a quick link in mind you could post that might help me or at least point me in the right direction, it'd be appreciated. I looked at the link posted above to the actual ROM file and it has some simple install instructions, however I'm not sure if that's all I need to do considering I'm still fully stock. Thanks again guys for all your help.
Click to expand...
Click to collapse
your phone is up to date! like they said above and the global is unofficial, therefore putting the global ruu on your phone would be the latest!
fcukthenet said:
I've heard this came out a couple months ago, but my phone as yet to update on its own. When I try and check for an update, it says there are no updates to be found. And when I check my phone, my current software is 3.14.605.12. Anybody know how I can upgrade to the latest? Ever since I upgraded to ICS, my phone has been nothing but trouble for me, and I'm hoping if I upgrade to the latest that some of these problems might go away. Any help would be much appreciated. Thanks!
HTC Rezound
Completely Stock / No mods
Android 4.0.3
Software 3.14.605.12
Verizon / USA
Click to expand...
Click to collapse
Run the 4.03.605.2 RUU. Let it boot 1 time, then wipe and install shrike's CounterShrike CM9 ROM. It's seriously a great ROM and super smooth in comparison to stock. Basically, what this phone should have been from day 1.
abrego47 said:
your phone is up to date! like they said above and the global is unofficial, therefore putting the global ruu on your phone would be the latest!
Click to expand...
Click to collapse
My apologies, but I don't quite understand. You're saying my phone is up to date with the 3.14.x.x software, and the 4.03.x.x that I'm looking for is actually some "custom" ROM and unofficial?
fcukthenet said:
My apologies, but I don't quite understand. My phone is up to date with the 3.14.x.x software, and the 4.03.x.x that I'm looking for is actually some "custom" ROM and unofficial?
Click to expand...
Click to collapse
think of it like getting a Blu-Ray Movie Early. They say when the Blu-ray should be released but some guys who know people can get an Early Copy but modify it to make it Better than its original Release. And this is all totally legal.
funnyangrykid said:
think of it like getting a Blu-Ray Movie Early. They say when the Blu-ray should be released but some guys who know people can get an Early Copy but modify it to make it Better than its original Release. And this is all totally legal.
Click to expand...
Click to collapse
So this 4.03.x.x is just not out yet? I've been seeing news articles of them reporting on it as far back as August. Has it just not rolled out to every phone yet? If not, then I will continue to wait. I just thought my phone was messed up and wouldn't take the update.
fcukthenet said:
So this 4.03.x.x is just not out yet? I've been seeing news articles of them reporting on it as far back as August. Has it just not rolled out to every phone yet? If not, then I will continue to wait. I just thought my phone was messed up and wouldn't take the update.
Click to expand...
Click to collapse
But waiting on Verizon to Roll out the Update will take a loooonng time. but Sites have the Latest (Unofficial)Build. Unofficial is kind of like Alpha, and Beta. Unofficial is inbetween Alpha n Beta.
It basically gives u global function so if your not going to other countries don't even worry about it. I promise if u take the time to figure everything out and flash it you won't be able to tell a difference. Just skip it
Sent from my ADR6425LVW using xda app-developers app
fcukthenet said:
So this 4.03.x.x is just not out yet? I've been seeing news articles of them reporting on it as far back as August. Has it just not rolled out to every phone yet? If not, then I will continue to wait. I just thought my phone was messed up and wouldn't take the update.
Click to expand...
Click to collapse
A few people got 4.03.605.1 a week or two after the 3.14.605.12 OTA, but they never mass rolled it out. I know of one person on XDA who got it as an OTA. 4.03.605.2 surfaced a few days later on Android Police, but I haven't heard of anyone getting it as an OTA, and there hasn't been a peep out of Verizon on it.
shrike1978 said:
A few people got 4.03.605.1 a week or two after the 3.14.605.12 OTA, but they never mass rolled it out. I know of one person on XDA who got it as an OTA. 4.03.605.2 surfaced a few days later on Android Police, but I haven't heard of anyone getting it as an OTA, and there hasn't been a peep out of Verizon on it.
Click to expand...
Click to collapse
Awesome, just what I needed to know. I will just be patient then. Thanks!
Yep, basically the only reason why the global update ever made it to light is because the manufacturers like HTC like to "splash test" on a few customers, let them report back bugs and what not, at this point if there aren't any bugs or the bugs that are present are workable, they will release the update in mass to the rest of the public.
Basically, a splash tester knew what they were doing, whipped together that nice little "flashable" ruu package and released it for the rest of us to hack up for our own uses. Usually, we look forward to these little splash test releases because they do contain newer bug fixes, but they also contain new kernels, libs and other useful things we need to continue making roms like aosp or sense 4 work better
I'd say if you want it, go ahead and flash it. Its just not official as they say because it did not arrive onto your phone via ota update directly from htc and verizon. Although it is an official build built by htc.
Hi all. I am running 4.1.1 and have become aware my stock-rooted android version is at risk because of this latest "bug that affects SSL security. I like the "stock with goodies" rom that I have and want to keep everything the same as it is now. I read that you can flash an update file, but am concerned with the known issues this may cause. I cannot find any other custom rom that I like enough to want to switch to.
Android version: 4.1.1, Htc Sense 4+, Software version 3.16.651.3 710RD, HTC SDK API level 4.63, Baseband (Radio) 1.13.11.0830, Hboot 1.12 2222
TWRP version is 2.4.1.0
I want to stay rooted and be able to wifi tether without issues. Other roms I had issues with wifi tether among other things so Ive liked and stuck to this rom.
What would you do?
Moved to Q&A
write.artie said:
Hi all. I am running 4.1.1 and have become aware my stock-rooted android version is at risk because of this latest "bug that affects SSL security. I like the "stock with goodies" rom that I have and want to keep everything the same as it is now. I read that you can flash an update file, but am concerned with the known issues this may cause. I cannot find any other custom rom that I like enough to want to switch to.
Android version: 4.1.1, Htc Sense 4+, Software version 3.16.651.3 710RD, HTC SDK API level 4.63, Baseband (Radio) 1.13.11.0830, Hboot 1.12 2222
TWRP version is 2.4.1.0
I want to stay rooted and be able to wifi tether without issues. Other roms I had issues with wifi tether among other things so Ive liked and stuck to this rom.
What would you do?
Click to expand...
Click to collapse
Before I give my input...what update file are you referring to? Was it an update file released from HTC, or from Google? Is it the 4.3 update that's been the latest rave around here (which is awesome, for the record)? Are you comfortable using Sense 5.0 (or 5.5)?
Sorry for all of the questions. While I can easily tell you that I would update, you don't seem very interested in doing so. Therefore, I need to know what you want, and you will get my educated answer.
My goal is to not be vulnerable to this SSL bug. I have not tried sense 5.0 or 5.5. Apparently google released a file to update to 4.3.
aarsyl said:
Before I give my input...what update file are you referring to? Was it an update file released from HTC, or from Google? Is it the 4.3 update that's been the latest rave around here (which is awesome, for the record)? Are you comfortable using Sense 5.0 (or 5.5)?
Sorry for all of the questions. While I can easily tell you that I would update, you don't seem very interested in doing so. Therefore, I need to know what you want, and you will get my educated answer.
Click to expand...
Click to collapse
koolcat7 said:
My goal is to not be vulnerable to this SSL bug. I have not tried sense 5.0 or 5.5. Apparently google released a file to update to 4.3.
Click to expand...
Click to collapse
I'm in the same boat running a 4.1.1-based ROM ... MeanBean ... that I would like to keep, too, because I like it a lot. I'm not in a hurry to change because I do no financial transactions on my phone, plus I have a complicating factor in that my Sprint device has been flashed to run on Page Plus, the Verizon MVNO, and I'm concerned that making a really drastic change like to 4.3 or 4.4 will break the flash and force me to get that redone (although the person I bought the phone from tested it and flash survived a factory reset in TWRP, so I'm feeling pretty good that wiping it's not going to be an issue).
I've done a Titanium Backup of my user apps and used TWRP to create a nandroid ... I'm a noob but I'm learning ... and I've downloaded Yankees 2450's Y14 Aroma 4.1.2-based app to my SD card and I'm planning to flash it at some point, "when I get around to it," as much to get in on the ROM fun as out of any concern over HeartBleed (although I won't deny that some concern exists). Maybe that's one you should consider, the reviews in the development section seem pretty solid, and again it doesn't seem like it would be a massive change, that's why I'm going with it.
Thanks for your input. Im looking at that thread now
where 4.1.2 aroma roms are. There are quite a few versions.... not sure which would be best to try.
aarsyl said:
Before I give my input...what update file are you referring to? Was it an update file released from HTC, or from Google? Is it the 4.3 update that's been the latest rave around here (which is awesome, for the record)? Are you comfortable using Sense 5.0 (or 5.5)?
Sorry for all of the questions. While I can easily tell you that I would update, you don't seem very interested in doing so. Therefore, I need to know what you want, and you will get my educated answer.
Click to expand...
Click to collapse
prw94 said:
I'm in the same boat running a 4.1.1-based ROM ... MeanBean ... that I would like to keep, too, because I like it a lot. I'm not in a hurry to change because I do no financial transactions on my phone, plus I have a complicating factor in that my Sprint device has been flashed to run on Page Plus, the Verizon MVNO, and I'm concerned that making a really drastic change like to 4.3 or 4.4 will break the flash and force me to get that redone (although the person I bought the phone from tested it and flash survived a factory reset in TWRP, so I'm feeling pretty good that wiping it's not going to be an issue).
I've done a Titanium Backup of my user apps and used TWRP to create a nandroid ... I'm a noob but I'm learning ... and I've downloaded Yankees 2450's Y14 Aroma 4.1.2-based app to my SD card and I'm planning to flash it at some point, "when I get around to it," as much to get in on the ROM fun as out of any concern over HeartBleed (although I won't deny that some concern exists). Maybe that's one you should consider, the reviews in the development section seem pretty solid, and again it doesn't seem like it would be a massive change, that's why I'm going with it.
Click to expand...
Click to collapse
koolcat7 said:
Thanks for your input. Im looking at that thread now
where 4.1.2 aroma roms are. There are quite a few versions.... not sure which would be best to try.
Click to expand...
Click to collapse
I downloaded the Y14 build which is the latest. I think 4.1.2 has the vulnerability but the actual HeartBleed bug hasn't been engaged as in 4.1.1.
Ah, i just downloaded the Y14 as well, but if theres still vulnerability there im not sure id feel okay with that.
prw94 said:
I downloaded the Y14 build which is the latest. I think 4.1.2 has the vulnerability but the actual HeartBleed bug hasn't been engaged as in 4.1.1.
Click to expand...
Click to collapse
koolcat7 said:
Ah, i just downloaded the Y14 as well, but if theres still vulnerability there im not sure id feel okay with that.
Click to expand...
Click to collapse
Well the Hisense Sero 7 tablet I'm using to post (running 4.2.1) "has the vulnerability," but it's safe because HeartBleed isn't enabled. It's only enabled on 4.1.1 from everything I've heard.
Im going to give it a go now, and flash Y14.
prw94 said:
Well the Hisense Sero 7 tablet I'm using to post (running 4.2.1) "has the vulnerability," but it's safe because HeartBleed isn't enabled. It's only enabled on 4.1.1 from everything I've heard.
Click to expand...
Click to collapse
koolcat7 said:
Im going to give it a go now, and flash Y14.
Click to expand...
Click to collapse
Let me know how it works for you, I need to go ahead and flash mine, as noted I'm concerned about HeartBleed but not over panicking based in my usage.
So do you think this version 4.1.2 will ever have that ssl bug enabled? Im flashed and already having issues, only 1x signal and profile wont update =/
Activate this device does nothing as well. Even in WiFi settings, ALL networks show full bars, when i know many are very far away. Looks like im going back to my nandroid backup and decide what to do when i find more info. ALSO, 4G LTE did connect, but kept going away every 10 seconds or so, back to 1x which is not normal.
prw94 said:
Let me know how it works for you, I need to go ahead and flash mine, as noted I'm concerned about HeartBleed but not over panicking based in my usage.
Click to expand...
Click to collapse
koolcat7 said:
So do you think this version 4.1.2 will ever have that ssl bug enabled? Im flashed and already having issues, only 1x signal and profile wont update =/
Activate this device does nothing as well. Even in WiFi settings, ALL networks show full bars, when i know many are very far away. Looks like im going back to my nandroid backup and decide what to do when i find more info. ALSO, 4G LTE did connect, but kept going away every 10 seconds or so, back to 1x which is not normal.
Click to expand...
Click to collapse
No, HeartBleed will not be enabled in anything save 4.1.1. You need to read up about the origin of this thing and the mechanism by how it is or isn't a threat.
Your only option is to go to a custom ROM that is not 4.1.1 based, or wait on HTC to issue the update for the stock ROM that they've promised, but have given no ETA for (and I wouldn't hold my breath).
I don't know if you have enough posts here to post on the development board ... that's another reason I've held off doing anything, although I'm getting close thanks to this thread ... but the developer of that ROM is very responsive to people with issues, and as I said the thing is very popular and seems pretty bulletproof from the response.
I promise I'm not his PR person, have never spoken to him, just found that ROM when I was looking for something that would be the least drastic change from what I'm running now, because of being flashed to Page Plus (which only gives me 3G, but I knew that going in). 4.3, you have to do more than just wipe and flash because of the partitions changes.
When I think about it, I don't see how changing the partitions on the phone will affect the functionality of the phone while using Page Plus. Maybe I'm looking at it incorrectly, but I don't reactivate my phone with Sprint every time that I flash a new rom, root it, change partitions, or anything at all. I could be wrong, though, for I have never flashed my phone to any other service.
aarsyl said:
When I think about it, I don't see how changing the partitions on the phone will affect the functionality of the phone while using Page Plus. Maybe I'm looking at it incorrectly, but I don't reactivate my phone with Sprint every time that I flash a new rom, root it, change partitions, or anything at all. I could be wrong, though, for I have never flashed my phone to any other service.
Click to expand...
Click to collapse
I really don't know, thus my hesitance in my own situation. Had a "recommend a ROM thread locked because I was unaware that wasn't kosher, so I went back to the boards (which can be a daunting experience for a noob) and found that particular ROM and I've also downloaded CM10 stable.
Am basically just acclimating myself to this stuff (phone was rooted, running MeanBean and flashed to PP when I bought it, have never done any of this), learning how to use Titanium and TWRP to make backups, etc.
I''d be lying if I said HeartBleed wasn't a concern to me, but I'm not as panicked as the OP about it. I know I need to probably change, although I'm quite happy as is with MeanBean. Biggest priority aside from security is not having to spend $50 or so to get the phone reflashed to PP.
4.1.1 has three digits the ones that matter are the first two. 4.1.2 may still be vulnerable to heart bleed. As for flashing to page plus you can do that on your own for free there are guides for how to do this all over. The best bet for every one running below 4.3 is to update to a Rom that is 4.3+ also with that update comes many fixes for the most common phone issue one might have while running below 4.3. There are 3 fully functioning roms currently available for the evo running on the updated partitions. Sense 5.5 by chubbz and I captain's stock Rom. And vins viper 4.0 with sense 5.5. Now with all this knowledge I've given you go explore, test the waters jump in. And always remember to post a question Rom related after at least 1 hour of thread searching Google and running the basics of Rom flashing. Wipe caches, dalvik if all else factory reset.
Sent from my EVO using Tapatalk
Thanks for the advice. I have searched threads, as noted I have been practicing to test the waters ... I have a Titanium Backup of my apps and a Nandroid of current system with MeanBean on my SD card so I'm comfortable with that. I think I'm pretty clear on wiping the phone ... although I thought the factory reset took care of everything, do you still need to wipe caches/dalvik after that? Searching the threads is where I picked up on the 4.1.2 ROM which seems to be pretty bulletproof stable, and as far as I know HeartBleed isn't enabled in 4.1.2. I was basically looking at that as an intermediate step, again just to dip my foot in the pool of ROM flashing before attempting anything more elaborate. The instructions for going to 4.3 are a bit more complicated than wipe, flash, reboot, and I'd prefer to learn to swim a little better before jumping off the high board. Same with the Page Plus flashing. I'm sure I could eventually figure out how to do it myself, problem is I use my phone pretty much perpetually for work and can't afford to have it out of service for a millisecond, so it's worth the cost to me to get it done right first time, although I'd rather not break the flash in the first place. I've gotten some advice from folks who do such flashing that 4.3 will break it, every time.
Sinistertensai said:
4.1.1 has three digits the ones that matter are the first two. 4.1.2 may still be vulnerable to heart bleed. As for flashing to page plus you can do that on your own for free there are guides for how to do this all over. The best bet for every one running below 4.3 is to update to a Rom that is 4.3+ also with that update comes many fixes for the most common phone issue one might have while running below 4.3. There are 3 fully functioning roms currently available for the evo running on the updated partitions. Sense 5.5 by chubbz and I captain's stock Rom. And vins viper 4.0 with sense 5.5. Now with all this knowledge I've given you go explore, test the waters jump in. And always remember to post a question Rom related after at least 1 hour of thread searching Google and running the basics of Rom flashing. Wipe caches, dalvik if all else factory reset.
Sent from my EVO using Tapatalk
Click to expand...
Click to collapse
So, I talked to a friend of mine who knows alot about alot... and he assured me that you will only be susceptible to heartbleed attacks on open or public wifi spots. So this bug does not affect anything over 3G/4G, which puts most of my concerns at risk. So don't be too worried if you don't constantly connect to open wifi networks you cannot completely trust. In conclusion, im not too concerned anymore and am going to leave the android version alone.
prw94 said:
Thanks for the advice. I have searched threads, as noted I have been practicing to test the waters ... I have a Titanium Backup of my apps and a Nandroid of current system with MeanBean on my SD card so I'm comfortable with that. I think I'm pretty clear on wiping the phone ... although I thought the factory reset took care of everything, do you still need to wipe caches/dalvik after that? Searching the threads is where I picked up on the 4.1.2 ROM which seems to be pretty bulletproof stable, and as far as I know HeartBleed isn't enabled in 4.1.2. I was basically looking at that as an intermediate step, again just to dip my foot in the pool of ROM flashing before attempting anything more elaborate. The instructions for going to 4.3 are a bit more complicated than wipe, flash, reboot, and I'd prefer to learn to swim a little better before jumping off the high board. Same with the Page Plus flashing. I'm sure I could eventually figure out how to do it myself, problem is I use my phone pretty much perpetually for work and can't afford to have it out of service for a millisecond, so it's worth the cost to me to get it done right first time, although I'd rather not break the flash in the first place. I've gotten some advice from folks who do such flashing that 4.3 will break it, every time.
Click to expand...
Click to collapse
koolcat7 said:
So, I talked to a friend of mine who knows alot about alot... and he assured me that you will only be susceptible to heartbleed attacks on open or public wifi spots. So this bug does not affect anything over 3G/4G, which puts most of my concerns at risk. So don't be too worried if you don't constantly connect to open wifi networks you cannot completely trust. In conclusion, im not too concerned anymore and am going to leave the android version alone.
Click to expand...
Click to collapse
OK good luck, still going to update mine as soon as I make the final call on which one to try. Decisions, decisions ...
Is there any real compelling reason to install the B148 update? The camera already seems fine to me without the update. It's operating smoothly and I get great battery life. Why do it?
GT1873 said:
Is there any real compelling reason to install the B148 update? The camera already seems fine to me without the update. It's operating smoothly and I get great battery life. Why do it?
Click to expand...
Click to collapse
If there is another update that isn't a major one (KK? fingers crossed) then it might require being updated to B148 first. Just a guess. It is a stretch to think we'll get another update to this phone though but we can't rule it out now that Huawei has come through with this minor update. It might be that since they mentioned a 4.4 KK update is coming when the phone came out that this update we just got would be a test run for the whole process. That's thinking optimistically. Realistically, I have no idea but would be happy if we continued to get updates (any at all) on our HAM2's.
Low light photography . Usually when you take a pic in low light it tends to darken the background too much . This update helps in that department . Plus , these updates provide an overall better stability to the system , the "misc. fixes" (No detailed description) they put at the end of the description should not be overlooked . They test the device thoroughly at their office and made the small needed changes . Even though you might not think it's a lot . Always better to stay updated . If it wasn't necessary nor improved the experience they would not have pushed the update out at all . My two cents . Update !
Well I was going to put in my 2 cents but you two said it all. If you made it all the way to the XDA website and was able to register and post something onto form your more then capable of upgrading to the new SYSTEM UPDATE. Plenty of people went ahead of you already and another thread was created for that. Everyone is having success with the B418 update.
The camera was rubbish in low light, and now it runs much smoother. Not iPhone or Android flagship smooth, but good enough.
And again, everyone else said pretty much all there is to say!
superbass311 said:
Well I was going to put in my 2 cents but you two said it all. If you made it all the way to the XDA website and was able to register and post something onto form your more then capable of upgrading to the new SYSTEM UPDATE. Plenty of people went ahead of you already and another thread was created for that. Everyone is having success with the B418 update.
Click to expand...
Click to collapse
My question wasn't "how" to do it, it was "why". What is there to gain?
GT1873 said:
My question wasn't "how" to do it, it was "why". What is there to gain?
Click to expand...
Click to collapse
Why upgrade from any software? What was wrong with Android 4.1? it runs everything. The manufacturer of the phone put in the money to update and push out the update for a reason. Not spyware. My phone has the update and i just hit the 48 hour mark and I still have 18%
Is B148 really an "upgrade"? Have any impactful improvements been noted?
If I hadn't rooted my phone I would install the update. But considering the lengthy process due to my root, I'm going to wait for the KitKat update.
Sent from my MT2L03 using XDA Free mobile app
Gir357 said:
If I hadn't rooted my phone I would install the update. But considering the lengthy process due to my root, I'm going to wait for the KitKat update.
Sent from my MT2L03 using XDA Free mobile app
Click to expand...
Click to collapse
Pretty much what I'm thinking, too.
It's not that bad, plus you gain a lot of experience during the process!
I can't say I see any differences but I know I am up to date.
Damn right u get a lot of experience, I had never rooted a phone; I always thought it was too confusing and was afraid of bricking but now I'm rooted and running some modules couldn't be any happier
Sent from my MT2L03
Update
I know I can't prove it but I just want it to be posted that before when I was on System Software B126 MightyText did not work when the screen was off. Even when I had it on protected apps and wifi on when the screen is off while charging. I had to keep my screen awake while I was using the app. Now after the update B148 I no longer have to do that. I was also having some problems with dropbox syncing when my phone is off and that is also fixed. So the "other fixes" in the system update. The stuff that they didn't mention is the reason why you should update. Actually since I have had the update my phone has been running very smooth. Everything just works when you click it.. Weirddd....
I just bought a used VS985 24B 5.0.1. Every so often it just doesn't boot. Pushing buttons does nothing. If I pull the battery, it boots normally, and behaves normally for a while. Then it happens again. I have read lots of folks have similar problems with their G3s, but couldn't find any saying they have solved the problem. Any ideas?
dweezle said:
I just bought a used VS985 24B 5.0.1. Every so often it just doesn't boot. Pushing buttons does nothing. If I pull the battery, it boots normally, and behaves normally for a while. Then it happens again. I have read lots of folks have similar problems with their G3s, but couldn't find any saying they have solved the problem. Any ideas?
Click to expand...
Click to collapse
If you prefer stock, rather than AOSP, you could KDZ back to a completely factory clean state and do any updates you're prompted for at that point....otherwise get on over to an AOSP build - much better imho. Not perfect by any means, but much cleaner and such
dweezle said:
I just bought a used VS985 24B 5.0.1. Every so often it just doesn't boot. Pushing buttons does nothing. If I pull the battery, it boots normally, and behaves normally for a while. Then it happens again. I have read lots of folks have similar problems with their G3s, but couldn't find any saying they have solved the problem. Any ideas?
Click to expand...
Click to collapse
i agree with ohlin, but would defiantly flash a stock img first, regardless, to clean things up first.
you dont know what the previous user may have done to the device. best to make it like new first.
btw, i really havent seen anyone mention this issue in any notable quantity.
bweN diorD said:
i agree with ohlin, but would defiantly flash a stock img first, regardless, to clean things up first.
you dont know what the previous user may have done to the device. best to make it like new first.
btw, i really havent seen anyone mention this issue in any notable quantity.
Click to expand...
Click to collapse
There are more but here are two links to groups of people with this problem on the LG G3
http://forum.xda-developers.com/lg-g3/help/att-lg3-wont-completely-unresponsive-t2843714
http://forums.androidcentral.com/ask-question/427785-lg-g3-will-not-turn-charge.html
I have not been able to find a stock image of 5.0.1. I suppose I could use an earlier KK image and then take the OTA. It may be easier to just pull the battery when it happens. It happens every couple of days. I've spent time getting this phone set up in the way that works best for me. I hate the thought of doing it all over again.
dweezle said:
There are more but here are two links to groups of people with this problem on the LG G3
http://forum.xda-developers.com/lg-g3/help/att-lg3-wont-completely-unresponsive-t2843714
http://forums.androidcentral.com/ask-question/427785-lg-g3-will-not-turn-charge.html
I have not been able to find a stock image of 5.0.1. I suppose I could use an earlier KK image and then take the OTA. It may be easier to just pull the battery when it happens. It happens every couple of days. I've spent time getting this phone set up in the way that works best for me. I hate the thought of doing it all over again.
Click to expand...
Click to collapse
not to downplay your links, but the majority of the complaints are fairly old. a couple dozen occurrences out of the, conservatively, tens of thousands sold, is pretty minor.
its been my experience, and i dint notice it mentioned in those threads, many times most of these freak occurrences not confirmed bugs, can be fixed with a clean flash. i have seen it done countless times.
is it guaranteed to fix the issue? no, but its really the best, and only possible solution to your issue.
there are links to factory img's in various threads in the general forum, including the most recent build.
whats an hour or so to re-setup the phone, when there is a decent chance it could be fixed? i wouldnt use someone's phone without clean flashing it anyways, you never know what they might have had on there, and factory resetting doesnt make it like new.
You make a good point. Maybe not what I hoped to hear, but sensible