[ROM] [5.1.1] Flyme OS 4.5.4.5R for redmi2 - Xiaomi Redmi 2 ROMs, Kernels, Recoveries, & Other

Flyme OS 4.5.4.5R - 20 January 2015
Please read me!!
If you do not read the installation instructions, I will ignore your post if you had issue installing because you did not follow them.
I am not responsible if your SD Card breaks, phone blows up or you die for some random reason. You are taking liability for flashing this ROM
Click to expand...
Click to collapse
How to install :
1.go to recovery (TWRP,Philz touch highly recommended)
2.wipe , or Factory reset
3.Flash ROM
4.Reboot
5.Done
ROM download
https://goo.gl/ECSCzD
Recovery download
https://goo.gl/cDJQXI
Source Code: https://github.com/FlymeOS
XDA DevDB Information
[ROM][5.1.1]Flyme OS 4.5.4.5R, ROM for the redmi2
Contributors
@ketut.kumajaya, @balika011, @zwliew, @nick37332001, @liu-aromer
Google, AOSP, Cyanogen, CyanogenMod community, Flyme
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: cm12.1
Version Information
Current: Beta
Version: 4.5.4.5R
Stable Release Date: 2016-01-20
Created 2015-12-21
Last Updated 2015-01-20
ScreenShots

zip file corrupt -_-

FortoszoneID said:
zip file corrupt -_-
Click to expand...
Click to collapse
What does it metioned or could not flash in TWRP?

Autines said:
What does it metioned or could not flash in TWRP?
Click to expand...
Click to collapse
I flashed on TWRP 2.8.7.0 Materialised by kumajaya and when flashing it will say "zip file corrupt"

FortoszoneID said:
I flashed on TWRP 2.8.7.0 Materialised by kumajaya and when flashing it will say "zip file corrupt"
Click to expand...
Click to collapse
No problem here. I upload again and you may try. BTW, the rom could not be flashed by TWRP built by kumajaya(I do no know the reason). You could use CWM or the TWRP in my google drive.

any bug there?

fadhlanisatria said:
any bug there?
Click to expand...
Click to collapse
It is good for daily use. It's based on cm12.1 by kumajaya.

thanks

please tell me how to go to recovery mode in this rom

naveenkumarph said:
please tell me how to go to recovery mode in this rom
Click to expand...
Click to collapse
The same way you flash the rom. If you have flashed the recovery, just power off and press three buttons at the same time, then free buttons until you feel the vibration.

liu-aromer said:
thanks
Click to expand...
Click to collapse
Are you mushroom? (Liu zhipeng)

yes
---------- Post added at 03:10 AM ---------- Previous post was at 03:10 AM ----------
Autines said:
Are you mushroom? (Liu zhipeng)
Click to expand...
Click to collapse
yes:victory:

Not able to flash this in my redmi 2 prime. The following error shows up in twrp:
mount: failed to mount /dev/block/bootdevice/by-name/system at .system:
Device or resource busy
symlink: some symlinks failed
E:Error executing updater binary in zip '/external_sd/flyme_autines_4.5.4.3R.zip
I tried using the twrp that you have uploaded in your drive also.

nitheeshas said:
not able to flash this in my redmi 2 prime. The following error shows up in twrp:
Mount: Failed to mount /dev/block/bootdevice/by-name/system at .system:
Device or resource busy
symlink: Some symlinks failed
e:error executing updater binary in zip '/external_sd/flyme_autines_4.5.4.3r.zip
i tried using the twrp that you have uploaded in your drive also.
Click to expand...
Click to collapse
你可以直接用k大的

Maybe you could use twrp built by kumajaya. I tried in my 2014813 but failed.
Redmi 2

Zip eror, tried to flash but error dude...
Sent from my 2014817 using Tapatalk

haroen88 said:
Zip eror, tried to flash but error dude...
Sent from my 2014817 using Tapatalk
Click to expand...
Click to collapse
Md5checksum missmatch,, file error..
Sent from my 2014817 using Tapatalk

haroen88 said:
Md5checksum missmatch,, file error..
Sent from my 2014817 using Tapatalk
Click to expand...
Click to collapse
Here is the md5 in my hard disk: ced8cec3bda20b78e5b879be8507f6c8
You may check md5 of download file. I have already upload twice. :angel:

Autines said:
Here is the md5 in my hard disk: ced8cec3bda20b78e5b879be8507f6c8
You may check md5 of download file. I have already upload twice. :angel:
Click to expand...
Click to collapse
Oke thanks, will try .. [emoji106]
Sent from my 2014817 using Tapatalk

Still no luck. Tried many times, with redownload. Error extracting files from ZIP in TWRP.

Related

[ROM][PORT][4.2.2] Paranoid Android 3.15 For Xperia Sola[Initial Release]

This is a port for Paranoid Android For Xperia Sola
Visit original thread over here http://forum.xda-developers.com/showthread.php?t=2097090
This ROM is currently in development and does not boot but we are working to fix it
Installation
Flash kernel (any JB)
Boot into CMW
Wipe all data/factory reset
Install ROM
Install Gapps
Wipe Dalvik Cache
Reboot
Internal Changelog
Initial Release
If you find any bugs let me know
This rom may be unstable as it is still work in progress
Download Link
v1.6
http://thefilebay.com/7rp/Paranoid_Android_3.15_For_Xperia_Sola.zip
Gapps
http://goo.im/gapps/gapps-jb-20130301-signed.zip
Thanks
FXP
Paranoid Android
TheDarkDefender
installation aborted status 7
Tried Again But stuck at boot animation.
SuperX002 said:
installation aborted status 7
Tried Again But stuck at boot animation.
Click to expand...
Click to collapse
Which kernel did you flash
urhacked said:
Which kernel did you flash
Click to expand...
Click to collapse
Mujeni JB
SuperX002 said:
Mujeni JB
Click to expand...
Click to collapse
Try flashing the kernel provided in the zip
Thanks.
Do you have know bug (same as cm 10.1 -> bluetooth, cam ? )
ad86 said:
Thanks.
Do you have know bug (same as cm 10.1 -> bluetooth, cam ? )
Click to expand...
Click to collapse
They both work fine for me
urhacked said:
They both work fine for me
Click to expand...
Click to collapse
Ok I download it
Is it smooth ?
ad86 said:
Ok I download it
Is it smooth ?
Click to expand...
Click to collapse
It is for me
Let me know if it is not fast for you and i will speed it up
urhacked said:
It is for me
Let me know if it is not fast for you and i will speed it up
Click to expand...
Click to collapse
Ok I will test it at home You should post some screenshots
eh? bluetooth works? ok will try
Sent from risahikari
Yup bluetooth works for me
Stuck at bootanimation
Also the rom gave a Status 7 error
Gagan91 said:
Stuck at bootanimation
Also the rom gave a Status 7 error
Click to expand...
Click to collapse
You have to flash the kernel provided in the zip
i did flash the kernel that came with the ROM
Gagan91 said:
i did flash the kernel that came with the ROM
Click to expand...
Click to collapse
Try this unzip the rom go to META-INF/com/google/android/ and replace the update binary file with the on provided below then zip the rom and try then
Download Link
http://www.sendspace.com/file/qzldhd
urhacked said:
Try flashing the kernel provided in the zip
Click to expand...
Click to collapse
Still same
urhacked said:
Try this unzip the rom go to META-INF/com/google/android/ and replace the update binary file with the on provided below then zip the rom and try then
Download Link
http://www.sendspace.com/file/qzldhd
Click to expand...
Click to collapse
Trying that :good::good:
Edit :
Installing update..
script aborted (no error message): ERROR in /sdcard/Parandroid Android 3.15 -port pepper.zip
(Status 7)
Installation aborted
This time the error pops at the very start
Try with the original zip again and if error come please post screenshot
Try with some other kernel to
BTW do you have an unlocked bootloader
urhacked said:
Try with the original zip again and if error come please post screenshot
Try with some other kernel to
BTW do you have an unlocked bootloader
Click to expand...
Click to collapse
With the original zip it gets stuck to bootanimation
And YES i do have bootloader unlocked
Trying a clean install this time
Flashing .54 stock then the kernel and hope it works this time :good:
---------- Post added at 10:33 PM ---------- Previous post was at 10:15 PM ----------
EDIT : No good.,, still stuck to boot animation after clean install

[RECOVERY][slteskt/lgt/ktt][EXYNOS] TWRP 2.8.6.0 (2015-04-20)

TWRP 2.8.6.0 For SLTESKT/KTT/LGT
(Exynos Modem 303)
ChangeLogs:
- initial release
- version up
Bugs:
- x
Installation:
Copy img file into sdcard root
Run terminal emulator
$ su
# dd if=/sdcard/TWRP-*.img of=/dev/block/mmcblk0p10
Download:
ARM
Enter recovery using Power+VolUP+Home is work.
Thanks to @modpunk​
XDA:DevDB Information
TWRP for slteskt/sltektt/sltelgt, ROM for the Samsung Galaxy Alpha
Contributors
qkdxorjs1002, modpunk
Source Code:
https://github.com/qkdxorjs1002/android_device_samsung_slteskt
https://github.com/qkdxorjs1002/android_kernel_samsung_slteskt
https://github.com/qkdxorjs1002/proprietary_vendor_samsung_slteskt
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-12-31
Last Updated 2015-04-21
850m
Work in 850m?
klau77 said:
Work in 850m?
Click to expand...
Click to collapse
Yeah, this recovery is for exynos based alpha.
850m
where to download?
klau77 said:
where to download?
Click to expand...
Click to collapse
Open your eyes
Thank you
Sent from my SM-G850S using XDA Free mobile app
kmsi said:
Thank you
Sent from my SM-G850S using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for this. Any plans to release TWRP for Snapdragon Alpha as well?
Is it suitable for SM-G850F?
Could you provide us with an Odin flash-able tar ? Would be much appreciated
GreySephiroth said:
Could you provide us with an Odin flash-able tar ? Would be much appreciated
Click to expand...
Click to collapse
Just rename file to recovery.img and compress file to tar file.
qkdxorjs1002 said:
Just rename file to recovery.img and compress file to tar file.
Click to expand...
Click to collapse
Oh, sry, didn't know it was that simple
Btw, if I would provide you with a boot.img or recovery.img dump from the new 5.0.2 850F firmware, could you compile a recovery for the new firmware ?
Please complete for new firmware 5.0.2 lollipop.....kitkat is dead
SM-G850w compatible?
Will this work on my Canadian (sm-g850w) Alpha? Thanks
Backup not working on 5.0.2 stok roms
pls make a update,I like to try some theme & twicks but without working back up
will be too much time losing
I'm curious and interested in the kernel in your files section.
Any changelog/features list ?
Thank you
hensk said:
Backup not working on 5.0.2 stok roms
pls make a update,I like to try some theme & twicks but without working back up
will be too much time losing
Click to expand...
Click to collapse
sorry,this recovery works perfect with Alpha 850F,i have old recovery 2.8.1.1
but after flashing 2860 recovery all OK
hensk said:
sorry,this recovery works perfect with Alpha 850F,i have old recovery 2.8.1.1
but after flashing 2860 recovery all OK
Click to expand...
Click to collapse
So the 2860 recovery works with 5.0.2?
yup fabulous, I already make my backup on 5.0.2 rom
alpha 850F
ayamgoreng said:
I'm curious and interested in the kernel in your files section.
Any changelog/features list ?
Thank you
Click to expand...
Click to collapse
That Kernel is not compatible with G850F.
Only for Exynos Modem Built-in Devices
Here flashable zip for twrp 2.8.6.0 i created from OP, thanks to him.
MEDIAFIRE

flyme 6 6.0 27 07 2017

rom:https://forum.xda-developers.com/honor-4x/development/rom-flyme-6-honor4-4xcherryby-136fei-t3635376
adaptation zip https://mega.nz/#!YNJ22IJK!3FB6hEhQ32GPj34goJg1fcz010XNMMSkYbztTZPEEFQ
flash open gaaps pico 6.0 after first boot
navbar http://www8.zippyshare.com/v/qfU1lluo/file.html
first flash failed unmount all in twrp and mount and reflash flashing done
thanks @136fei
install whit this recovery and no fails installation https://mega.nz/#!BZtE1bzZ!rlzdHNpf6Xs4t00o-GjHJbTUnE4s9aaNmsv1TutLLy8
adapted by me
i adapt the rest of the rom only kernel chinese developers lock the kernel for other devices
full rom https://mega.nz/#!cYISHCgB!fm0xuSaze6MTxfwzKnMJQjceEggpH1izdlPFRwszzGE
patch framework https://mega.nz/#!4V4BiRYR!qMiEqRY6EyYaC_Z-4XuX4iGr2E8aSPmk9vXj90ndjkI
make your magic @mparus xd
luistro said:
full rom https://mega.nz/#!cYISHCgB!fm0xuSaze6MTxfwzKnMJQjceEggpH1izdlPFRwszzGE
patch framework https://mega.nz/#!4V4BiRYR!qMiEqRY6EyYaC_Z-4XuX4iGr2E8aSPmk9vXj90ndjkI
make your magic @mparus xd
Click to expand...
Click to collapse
Can i install this rom for g760 Now ?
Sent from my G760-L01 using Tapatalk
no for now mising patch kernel @mparus
rom uploaded and working first post
luistro said:
rom uploaded and working first post
Click to expand...
Click to collapse
I get error 7 in twrp when i try to install
Sent from my G760-L01 using Tapatalk
sajadzare said:
I get error 7 in twrp when i try to install
Sent from my G760-L01 using Tapatalk
Click to expand...
Click to collapse
Intall whith twrp omni v2
What version of xposed is supported?
Sent from my unknown using Tapatalk
Browse flyme tools is xposed for flyme roms
136fei 有更新,求更新
thank you its good
update no chinese apps
flash open gapps pico 6.0 after first boot
is this rom stable?. thanks
Where's double tap to wake up screen?
salehi.com said:
Where's double tap to wake up screen?
Click to expand...
Click to collapse
aditional settings volume up to wake
luistro said:
rom:https://forum.xda-developers.com/honor-4x/development/rom-flyme-6-honor4-4xcherryby-136fei-t3635376
adaptation zip https://mega.nz/#!YNJ22IJK!3FB6hEhQ32GPj34goJg1fcz010XNMMSkYbztTZPEEFQ
flash open gaaps pico 6.0 after first boot
navbar http://www8.zippyshare.com/v/qfU1lluo/file.html
first flash failed unmount all in twrp and mount and reflash flashing done
thanks @136fei
install whit this recovery and no fails installation https://mega.nz/#!BZtE1bzZ!rlzdHNpf6Xs4t00o-GjHJbTUnE4s9aaNmsv1TutLLy8
adapted by me
Click to expand...
Click to collapse
How can I install the Chinese version of G 7?
---------- Post added at 05:35 AM ---------- Previous post was at 04:57 AM ----------
luistro said:
rom:https://forum.xda-developers.com/honor-4x/development/rom-flyme-6-honor4-4xcherryby-136fei-t3635376
adaptation zip https://mega.nz/#!YNJ22IJK!3FB6hEhQ32GPj34goJg1fcz010XNMMSkYbztTZPEEFQ
flash open gaaps pico 6.0 after first boot
navbar http://www8.zippyshare.com/v/qfU1lluo/file.html
first flash failed unmount all in twrp and mount and reflash flashing done
thanks @136fei
install whit this recovery and no fails installation https://mega.nz/#!BZtE1bzZ!rlzdHNpf6Xs4t00o-GjHJbTUnE4s9aaNmsv1TutLLy8
adapted by me
Click to expand...
Click to collapse
What do you need to brush in? What is the order of brush-in? Do I need to clear the data partition? Do I need to clear the system partition?

Error 255 on every rom installation

When i try to install every rom using twrp getting :
checking for MD5 file...
Skipping MD5 check: no Md5 file found
"Updater process ended with ERROR:255
Error installing zip file '/sdcard/...zip"
already tried to re-download or download the same but from different source, same thing happen.
Phone: sony z2 d6503 android 6.0.1 root with supersu build: 23.5.A.0.570
Can you cancell the thread
i found what is the problem, sorry can you close this thread
nonloso0 said:
i found what is the problem, sorry can you close this thread
Click to expand...
Click to collapse
I have the same problem, how do you fix it?
MasterMind1623 said:
I have the same problem, how do you fix it?
Click to expand...
Click to collapse
Mount/data untick in recovery. Or if your rom in sdcard, move to ex-sdcard.
how im having the same issue can u show me some pictures please thank you
ERROR: 255 every time upon aosip .zip twrp install
3's&7's said:
ERROR: 255 every time upon aosip .zip twrp install
Click to expand...
Click to collapse
. The problem is with the custom recovery. Just use the lates version of the custom recovery. If you try to install lineage os 15.1 which is based on android 8.1 then it can't be done using twrp below 3.1.x as the lower versions were not developed keeping android oreo in mind. Hope this helps.
Update twrp and try
Rishikesh G Kulkarni said:
. The problem is with the custom recovery. Just use the lates version of the custom recovery. If you try to install lineage os 15.1 which is based on android 8.1 then it can't be done using twrp below 3.1.x as the lower versions were not developed keeping android oreo in mind. Hope this helps.
Click to expand...
Click to collapse
Still can't

[ROM] [PORT] Collections Mi A1 ROMs for Mi5X [2018-04-11] [Oreo] [ROOTED]

PORT AOKP OREO From MiA1 With Magisk 16.0 23-03 :
Link
Thanks to @ravinder0003
PORT RR 6.0 From MiA1 With Magisk 16.0 04-11 :
Link
Thanks to @mountaser halak
PORT Android One Beta 13-03 From MiA1 With Magisk 16.0 :
(no needed Gapps)
Download link :
MEGA
How to install:
- Unlock your bootloader
- Flash A1 Oreo Firmware
- Flash Oreo TWRP modded
- Wipe Data/Cache/Dalvik/System
- Flash ROM zip through TWRP
- Flash Gapps pico 8.1
- Reboot to System
Known issues:
- You tell me.
XDA:DevDB Information
AOSP Oreo for Mi5X , ROM for the Xiaomi Mi 5X, ROM for the Xiaomi Mi 5X
Contributors
mbppereira, Alex12, ravinder0003
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP oreo by Alex12, FIRMWARE Mi A1 OREO
Based On: AOKP
Version Information
Status: Beta
Created 2018-03-11
Last Updated 2018-04-11
Change log:
RR 6.0 04-04:
https://raw.githubusercontent.com/Tissot-Development/RR-OTA/master/changelog.txt
AOKP OREO 03-23:
- Jack problem solved (Mi 5X)
- Magisk Incluided
- Added Xiaomi Doze
- Fixed Live Display
- Added Dt2w
- Rebased on new sources from Xiaomi
Help me
it does not boot. Stand at the Mi logo
levietnamm said:
it does not boot. Stand at the Mi logo
Click to expand...
Click to collapse
same problem
Have you tried this "Go to recovery then after you flashed it, go to "Advanced" then tap on "Terminal". Write "a1to5x" and press Enter. Wait until it finishes. Make proper wipes and reboot."
AncientLord said:
Have you tried this "Go to recovery then after you flashed it, go to "Advanced" then tap on "Terminal". Write "a1to5x" and press Enter. Wait until it finishes. Make proper wipes and reboot."
Click to expand...
Click to collapse
It didn't help. At the end I wipe cache and dalvik cache
yes it boot.... just intall the modded oreo twrp, install rom, gapps and magisk... playing now
Same problem as well
---------- Post added at 03:53 PM ---------- Previous post was at 03:52 PM ----------
adioph said:
yes it boot.... just intall the modded oreo twrp, install rom, gapps and magisk... playing now
Click to expand...
Click to collapse
Which gapps package did you use ?!
all works, but voice input replaced the normal keyboard and I can not access in my google account (stock gapps)
I made full wipe, flashed the rom type a1to5x in terminal and then made wipe cache and dalvik cache but when try to flash the gapps an error appears that the gapps doesn't match the rom
jdki666 said:
I made full wipe, flashed the rom type a1to5x in terminal and then made wipe cache and dalvik cache but when try to flash the gapps an error appears that the gapps doesn't match the rom
Click to expand...
Click to collapse
My phone running the oreo update 8.0.0 with the oreo moded twrp
@mbppereira
Thank you for your great work.
I am not sure that if this rom can work well with this recovery.
If not, would you please port it for Mi5X?
vangame said:
@mbppereira
Thank you for your great work.
I am not sure that if this rom can work well with this recovery.
If not, would you please port it for Mi5X?
Click to expand...
Click to collapse
Here
https://androidfilehost.com/?fid=673956719939826760
mbppereira said:
Here
https://androidfilehost.com/?fid=673956719939826760
Click to expand...
Click to collapse
Oh, so fantastic, thank you very much.
Hope you post a new thread and add some information.
Do this rom port from the latest build[08/03/2018]?
vangame said:
@mbppereira
Thank you for your great work.
I am not sure that if this rom can work well with this recovery.
If not, would you please port it for Mi5X?
Click to expand...
Click to collapse
Are you extracting payload.bin or someone with the A1 sent you the dumped system.img and boot.img?
Aex12 said:
Are you extracting payload.bin or someone with the A1 sent you the dumped system.img and boot.img?
Click to expand...
Click to collapse
I'm extracting with a Python Script.
Do you want help me fix the jack problem ? I have no idea how fix it.
vangame said:
Oh, so fantastic, thank you very much.
Hope you post a new thread and add some information.
Do this rom port from the latest build[08/03/2018]?
Click to expand...
Click to collapse
Yes
Finally it work thanks you for the fantastic work
Aex12 said:
Are you extracting payload.bin or someone with the A1 sent you the dumped system.img and boot.img?
Click to expand...
Click to collapse
@Aex12, do you have tools to extract payload.bin to system.img?
@alex12 The script is here:
https://drive.google.com/open?id=1fB4r68tj7zQKCooyopYux8cQzGPxDKno
comand: ./payload_dumper.py payload.bin

Categories

Resources