My moto e is not starting not charging after the battery is completely to 0%
i removed and placed but also no use
not starting/charging
no boot logo and no battery charging logo
plz tell me what to do???
never shown display
.When I connect charger to it to my laptop, white led blinks for 1 second.. It shown qhsusb_bulk device. I updated its driver successfully with Qualcomm HS-USB QLoader 9008.
I am very sorry to say but your phone is hard bricked. You must have tried downgrading/upgrading firmware in a fatal pathway. Only thing you can do is getting your motherboard replaced.
nilanko said:
I am very sorry to say but your phone is hard bricked. You must have tried downgrading/upgrading firmware in a fatal pathway. Only thing you can do is getting your motherboard replaced.
Click to expand...
Click to collapse
sir plz tell me how to do it ...?
Go to service centre for a new motherboard!
vsaik1999 said:
My moto e is not starting not charging after the battery is completely to 0%
i removed and placed but also no use
not starting/charging
no boot logo and no battery charging logo
plz tell me what to do???
never shown display
.When I connect charger to it to my laptop, white led blinks for 1 second.. It shown qhsusb_bulk device. I updated its driver successfully with Qualcomm HS-USB QLoader 9008.
Click to expand...
Click to collapse
sir how to downgrading/upgrading firmware without entering into fastboot mode
hi!
vsaik1999 said:
sir how to downgrading/upgrading firmware without entering into fastboot mode
Click to expand...
Click to collapse
there's one post here, need jflash drivers (box) and flash with USB
i don't you how to but i did it in a nokia...
vsaik1999 said:
sir how to downgrading/upgrading firmware without entering into fastboot mode
Click to expand...
Click to collapse
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
marianoasis said:
there's one post here, need jflash drivers (box) and flash with USB
i don't you how to but i did it in a nokia...
Click to expand...
Click to collapse
It does not work. Unbricking Moto E is not possible
nilanko said:
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
It does not work. Unbricking Moto E is not possible
Click to expand...
Click to collapse
sir it is not "on"ing and it not going into fastboot also
vsaik1999 said:
sir it is not "on"ing and it not going into fastboot also
Click to expand...
Click to collapse
It won't because its hard bricked. U need a new motherboard.
nilanko said:
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
It does not work. Unbricking Moto E is not possible
Click to expand...
Click to collapse
It is possible. Search for the thread by Lucas Eugene for unbricking moto e.
Hit Thanks if I Helped!!!
PoseidonKing said:
It is possible. Search for the thread by Lucas Eugene for unbricking moto e.
Hit Thanks if I Helped!!!
Click to expand...
Click to collapse
I followed his guide and after that, my computer stopped detecting my phone completely, not even that "bulk" thing anymore. It was totally dead.
Actually I don't think you phone is bricked because the same thing is happening to me too but I kepp on removing and disconnecting till the phone starts boot animation so not a brick by the way did you flash any roms?? Cause I'm running mm rom BTW this problem recently started with me so I'm looking for better suggestion s
What did you do to your phone before this happened?
This event occurred when my phone was completely at 0%.
The solution was to just keep it charging overnight like plugged in.
May or may not work for you.
Related
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
leocadenas said:
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
Click to expand...
Click to collapse
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Amogh Thambi said:
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Click to expand...
Click to collapse
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
gsstudios said:
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
Click to expand...
Click to collapse
Okay. Thanks a lot! I guess I have to change it's motherboard!
Amogh Thambi said:
Okay. Thanks a lot! I guess I have to change it's motherboard!
Click to expand...
Click to collapse
yep, that's one way to solve it.
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
leocadenas said:
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
Click to expand...
Click to collapse
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Amogh Thambi said:
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Click to expand...
Click to collapse
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
warrior1208 said:
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
Click to expand...
Click to collapse
When i flashed boot.img the battery was almost full.... After it failed to flash... I rebooted to see if everything was okay... But Boom! After i pressed reboot to recovery the phone turned off and died..... Also in the repair shop, we tried booting up with electric source but still no luck! First Weird and Bad experience with samsung
Amogh Thambi said:
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Click to expand...
Click to collapse
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
jaysan2 said:
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
Click to expand...
Click to collapse
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Amogh Thambi said:
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Click to expand...
Click to collapse
hi, as i have seen your posts you have written that you do have tried jig, and no results. try to take out battery and connect the jig and put the battery, i believe this the last chance you might have through jig. Or just jtag it for 25$ it is not that expensive, let me know what happens with jig.
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
I am having exactly same issue with my Moto E XT1022
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Hi, I am having exactly the same issue with Moto E 1st Gen. I just want to if you were ever able to revive your mobile? Please do reply.
MusaddiqueAli said:
Hi, I am having exactly the same issue with Moto E 1st Gen. I just want to if you were ever able to revive your mobile? Please do reply.
Click to expand...
Click to collapse
No..Failed to make it work..
Okay. Thanks for the swift reply.
coder0000 said:
No..Failed to make it work..
Click to expand...
Click to collapse
But by the way, did you try the QFIL method.
MusaddiqueAli said:
But by the way, did you try the QFIL method.
Click to expand...
Click to collapse
Yes you can revive your phone through QFIL. I had. Lenovo a6000 plus and in case of hard brick (when you can't access recovery or fastboot), you can still revive your phone through the Diagnostics port. You need to have a ROW firmware file in my case. I don't have a link for your device. You have to search that for yourselves. But, I just want to give you some hope.
In case, you want to see how this works, you can see the 2nd method. Other methods might work too. CHECK OUT THIS LINK.
Okay. Thanks for the reply......
sasukay said:
Yes you can revive your phone through QFIL. I had. Lenovo a6000 plus and in case of hard brick (when you can't access recovery or fastboot), you can still revive your phone through the Diagnostics port. You need to have a ROW firmware file in my case. I don't have a link for your device. You have to search that for yourselves. But, I just want to give you some hope.
In case, you want to see how this works, you can see the 2nd method. Other methods might work too. CHECK OUT THIS LINK.
Click to expand...
Click to collapse
And, and about the ROW Firmware that you mentioned, I came to know that ROW is mostly in the case of Lenovo mobiles, whereas in case of Moto E, I didn't find anything with ROW firmware.
But, I would like to know that the ROW Firmware that you mentioned, is it in .zip file format or something else?
MusaddiqueAli said:
And, and about the ROW Firmware that you mentioned, I came to know that ROW is mostly in the case of Lenovo mobiles, whereas in case of Moto E, I didn't find anything with ROW firmware.
But, I would like to know that the ROW Firmware that you mentioned, is it in .zip file format or something else?
Click to expand...
Click to collapse
For me the format was .row only. I checked google for it and it's not so for others I guess. I've scoured some links for you, which might help, I'm not sure though. Specially, the firmware files, I don't know if these are what you need. But, you can have a look and atleast try unbricking your device. Good luck!
1) MOTO FIRMWARE FILES
2) Tutorial 1 (I would prefer this).
3) Tutorial 2
Thnaks.
sasukay said:
For me the format was .row only. I checked google for it and it's not so for others I guess. I've scoured some links for you, which might help, I'm not sure though. Specially, the firmware files, I don't know if these are what you need. But, you can have a look and atleast try unbricking your device. Good luck!
1) MOTO FIRMWARE FILES
2) Tutorial 1 (I would prefer this).
3) Tutorial 2
Click to expand...
Click to collapse
:good: Thank you very much for the links. I'll try those files. Hope it works.
One thing I am confident about now after my recent research online and here in XDA is that, my phone can be unbricked (whether QFIL method or otherwise) however severe the problem is.
MusaddiqueAli said:
:good: Thank you very much for the links. I'll try those files. Hope it works.
One thing I am confident about now after my recent research online and here in XDA is that, my phone can be unbricked (whether QFIL method or otherwise) however severe the problem is.
Click to expand...
Click to collapse
Plz Let me know if you succeed..
Please help Me.... I'm having the same problem.. Anyone found out the solution?
Can qfil be used?
If qfil can be used, please give me link for the. MBN, rawprogram0.xml and patch file for moto e xt1022
FIX suggestion
If anyone has another working Moto E then we just need to extract the internal backup which can be used to unbrick our phones. I'm trying from past 2 weeks to find a user with working moto e but couldn't find one..
If found please contact me..
Thank you.
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Am also having similar kind of problems with my Moto E, apart from the notification light blink once when long press the power button. In my case, notification light is blinking only when connected to charger.
Waiting for your problems to be resolved [emoji41]
Sent from my Lenovo P2a42 using Tapatalk
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Mine was also the same case , Downgraded to KitKat from lollipop received an OTA and bang! I got bricked!
My device gets detected as QUALCOMM HS-QDLOADER 9008 in COM ports which is also known as EMERGENCY DOWNLOAD MODE. I have rescued many phones from this incl. Nokia Lumia Devices(9006 and 9008)through Care Suite, Xiaomi devices but their Firmware allows them to flash from Emergency Download Mode.
But Motorola Has only released the FASTBOOT FIRMWARE which doesnt provide the way to Load FW in EDL mode, blank-flash files are leaked for the Moto G which does the same thing! But Blank-Flash are not available for Moto E which can resue you from Emergency DL mode . I tried using different tools like QPST an all but no luck.
The Solution till now is through JTAG/ATF recovery only which writes the eMMC through JTAG interface and RESTORES THE BOOT. It needs a specialised HW and can be done by a Mobile Technician for a small amount. This is the only solution i found though it was 1 yr ago
Hello guys, it looks like this forum is still alive (unlike my phone lol) so let me explain what happened to my D620r.
Firstly - my friend bricked the phone during bootloader unlock process (xD rip) now the phone shows up as QDLoader 9008 yesterday it was like "QHSUSB_BULK" or something like this but after installing some drivers its QDLoader now lol xD (sometimes QDLoader disappears from device manager AND SHOWS UP AS http://imgur.com/a/qJSzE then i have to click the testpoint again)
BASICALLY
I'VE TRIED DOING THIS https://forum.xda-developers.com/showthread.php?t=2582142
nothing happened
and btw all partitions disappeared now there's only QDLoader in Device Manager that's all
Try this:
https://forum.xda-developers.com/g2-mini/general/guide-unbrick-bricked-wrong-aboot-img-t3128896
Nope, screen dont even light up when i connect the phone (one case was when i connected phone without battery then screen was lighting up but now there's nothing) btw im trying this right now https://forum.xda-developers.com/g2-mini/help/lg-g2-minid620r-hard-brick-recovery-t3543466 but i dont really know how to use this emmc software download app
You can follow the procedure in post #2 of the thread I linked.
not working
EMMC Software download app detects phone as "COM2 Phone in download mode"
pls halp
Kaszke said:
pls halp
Click to expand...
Click to collapse
Try to use the lg flash tool 2014 while using the downloadmode key combination. If the phone gets detect, you can flash a firmware, that is present somewhere in the internet (there are a lot).
doesnt work, pls halp again
Kaszke said:
doesnt work, pls halp again
Click to expand...
Click to collapse
If you need help, explain us your probem and tell us what you did before to solve it.
Read first post?
@ref
Simple QHSUSBBULK, I failed at flashing bootloader i think i flashed G2 one instead of G2 Mini
Kaszke said:
@ref
Simple QHSUSBBULK, I failed at flashing bootloader i think i flashed G2 one instead of G2 Mini
Click to expand...
Click to collapse
Then try again with the one for the g2m
How can i reinstall it without any adb and things?
Kaszke said:
How can i reinstall it without any adb and things?
Click to expand...
Click to collapse
I'm pretty sure you can't.
So why u tell me to do that XD
Kaszke said:
So why u tell me to do that XD
Click to expand...
Click to collapse
How did you flash the bootloader of the G2?
Do that again but with the bootloader of the g2m.
In the case you need adb:
https://forum.xda-developers.com/showthread.php?t=2317790
So my phone just got stuck while normal usage. Tried restarting and the phone began boot looping.
Did plenty of research and finally decided to flash. Tried to flash using mi flash in fastboot mode but failed then google search made me realise my bootloader was locked. Did more research and decided to flash using test point EDL method.
Things went pretty well and the flash (miui v8) and the process became successful and when I powered my device the phone went back to boot loop again.
Tried flashing again and the result was the same.
It would be really helpful if somebody could actually help clear the issue. Did pretty much everything I could do as a newbie to flashing.
thank you!
There are 2 varients of rn4 one is mediatek(note 4x) and the other is Snapdragon so check if u flashed right firmware
thisbearisdrunk said:
There are 2 varients of rn4 one is mediatek(note 4x) and the other is Snapdragon so check if u flashed right firmware
Click to expand...
Click to collapse
No, I have flashed the correct file(Mido) and the flashing process went quite well but the problem still exists.
M i L i N said:
No, I have flashed the correct file(Mido) and the flashing process went quite well but the problem still exists.
Click to expand...
Click to collapse
How is ur phone being recognised in mi flash tool?
A serial number appears or something else like "com_port" appears?
thisbearisdrunk said:
How is ur phone being recognised in mi flash tool?
A serial number appears or something else like "com_port" appears?
Click to expand...
Click to collapse
It's recognised as COM4 the first time I tried then sometimes when I connect it shows COM3.
M i L i N said:
It's recognised as COM4 the first time I tried then sometimes when I connect it shows COM3.
Click to expand...
Click to collapse
If it recognises ur phone like that then flashing does nothing to ur phone so the only way is to go into edl mode and then flashing
https://forum.xda-developers.com/re...ool-redmi-note-4-edl-mode-o-removing-t3684024
Use this tool to go into edl mode and then flash
This thread can help ,because i bricked my phone once without unlocking the bootloader and the miflashtool recognised my phone like how it recognised urs and this thread saved my phone
Good luck
can someone please help hard bricked brand new moto edge nothing will do anything no matter what try black screen. i'll pay someone to help please!! thanks
ThirteenSeasons said:
can someone please help hard bricked brand new moto edge nothing will do anything no matter what try black screen. i'll pay someone to help please!! thanks
Click to expand...
Click to collapse
If you have a pc, see if it's in EDL Mode
Is my device in EDL Mode?
sd_shadow said:
If you have a pc, see if it's in EDL Mode
Is my device in EDL Mode?
Click to expand...
Click to collapse
it is so how do i fix please???!!1 i'll legit pay you whatever want lol
sd_shadow said:
If you have a pc, see if it's in EDL Mode
Is my device in EDL Mode?
Click to expand...
Click to collapse
it is how do i fix
ThirteenSeasons said:
it is so how do i fix please???!!1 i'll legit pay you whatever want lol
Click to expand...
Click to collapse
??
ThirteenSeasons said:
it is how do i fix
Click to expand...
Click to collapse
You have 2 possible options
1. You can wait several days for the battery to die, then connect to a wall charger.
It may boot normally, this is the safest thing to try.
2. Use a blankflash there is one available for XT2061(burton) devices
https://mirrors.lolinet.com/firmware/moto/burton/blankflash/
download the blankflash, unzip it and
run the blank-flash.bat
If the blankflash works, the device will reboot, you may need to reflash firmware with fastboot or LMSA
sd_shadow said:
You have 2 possible options
1. You can wait several days for the battery to die, then connect to a wall charger.
It may boot normally, this is the safest thing to try.
2. Use a blankflash there is one available for XT2061(burton) devices
https://mirrors.lolinet.com/firmware/moto/burton/blankflash/
download the blankflash, unzip it and
run the blank-flash.bat
If the blankflash works, the device will reboot, you may need to reflash firmware with fastboot or LMSA
Click to expand...
Click to collapse
I accidently flashed moto g power into it when it's edge +... What if neither of those fix it? It's been unplugged for days. Idk if the bttrys dead cause no screen... Do you think fixable ?
ThirteenSeasons said:
I accidently flashed moto g power into it when it's edge +... What if neither of those fix it? It's been unplugged for days. Idk if the bttrys dead cause no screen... Do you think fixable ?
Click to expand...
Click to collapse
Ok, that's info you should have shared first.
Letting the battery die won't help.
Your only option is blank flash, but no guarantee that it'll work.