Wonder if anyone ca help me please. I had Temasek.s 10.1 version installed om my phone.
I grew tired of f it and desidet to install Omega v34 instead, wich is an excellent ROM from my own experience.
However; This time when in installed it I found my self in a kind of boot loop.. You know the "Android walking robot"n who appears when waiting for the system to boot. My problem is that it never get pass this "robot" and never get to the system. I font knoew what to do, simce I cant get in ti CWM or any other means to rescue the day. Any other able to helt me with this? I kinda scared my phone are bricket or something. Please kind people og the community; Helt me !
Sounds like you need to reflash doing a proper clean installation
slaphead20 said:
Sounds like you need to reflash doing a proper clean installation
Click to expand...
Click to collapse
Thanks for you response. But I dont know how to reflash because I never get pass the "Omega walking Android robot" There is no way I can get to Clockworkmod for instanse. Help me, anyone?
I am so super-scared my phone is bricket by now...
You will find all you need in the rollup sticky at the top of the general thread, don't worry you haven't wrecked your phone.
You need to download Odin onto your pc
Download a stock Rom
Boot into download mode (volume down/power/home)
Flash Rom
As I said, full instructions can be found in the sticky
Hello all,
I have tried many things before asking for help, but nothing worked so far.
Here is the story:
I was on ICS 4.0.4, with default ROM coming from carrier.
I wanted to install CM9.1,
spent countless hours doing all backup and reading tutorial.
Tried finally yesterday and it was stuck doing "wiping data". Left it for 20min+ and nothing.
After restarting it, it is now stuck on the boot logo.
I couldn't enter anymore CWM or stock recovery (up+home+power), but could enter Download mode.
So I tried a couple of things I have read on the forum, like installing Siyah-s2-v5.0.1.tar through Odin 3.04 but I still cannot enter recovery mode.
I've read (too late) about the mmc brick bug (couldn't find anyone speaking about it in any tutorial until I reached this point... nothing on CM wiki or in other tuto... classic!).
I hope I'm not in this case though as I can still go to DL mode, and the phones having the brick bug are completely dead (blank screen or no DL mode), as per http://forum.xda-developers.com/showthread.php?t=1756242
I managed to finally get CWM working only by using GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar from Odin, then tried to install CM9.1 from SD card but after reboot it is stuck on the blue cyanogenmod animation boot screen and nothing happens.
Tried also to restore from CWM my nandroid backup, but during the restore it seems to hang then restart by itself, and then I'm back to Galaxy S boot logo (the animated one with the big S).
And after this I have lost again access to recovery mode.
I can't go back to stock and I can't install CM... I was not expecting such issues, it all seemed pretty basic on paper.
I'm really stressed and don't know what to do
Flash a stock rom in Odin (download mode), re-root your phone/flash a kernel with CWM, restore your backup ?
Hi,
thanks for answering,
I have tried to locate such a rom, but I'm not sure which one... is there a specific one to try ? could you point me to it please ?
so far I have tried I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but no luck
you also say "re-root", at the time I used this method:
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel - xda-developers
http://forum.xda-developers.com/showthread.php?t=1501719
Do I need root to install Siyah kernel from Odin ?
I'm trying one from sammobile... let's hope :/
The bad thing is I had no Yellow triangle at the beginning since I'm stuck in this boot loop or no boot to be precise.
Now that I have tried different things to fix it, it is still not working and I have my flash counter = 10.
I cannot even go back to the shop, is there a way to reset it knowing I cannot even reach the OS, I have only DL mode or CWM...
Use a stock rom for your region/carrier (or any stock rom from any region really), it doesn't really matter as I presume you'll be restoring a backup and/or going back to a custom rom anyway won't you ?
Samfirmware & AndroidFirmwares.net have lots of stock roms.
No, you don't need root to flash an Odin version of Siyah. So yes, you can flash that after you've got stock up & running to root your phone rather than re-rooting your phone by flashing a CFRoot kernel or using another root method. Just make sure the version of Siyah you're going to flash matches up with the stock rom you've got on (I.E if you flash a GB stock rom use GB Siyah, ICS stock = use ICS Siyah, etc, etc).
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Don't worry about the flash counter. That's the least of your problems while your phone is borked Worry about it when it's fixed. There's nothing you can do about the triangle while your phone is cactus.
When you've got it up & running again, use Triangle Away.
But first things first.
---------- Post added at 04:02 AM ---------- Previous post was at 03:59 AM ----------
You're welcome.
Um, no. Absolutely not. Nothing personal, but if I did that for every person who's asked me for 'hands on' help since I've been here, I'd have spent my time doing nothing else. I don't do 'personal' with people from XDA (which is why I have PM's blocked except for mods).
Besides, you're going to learn much more fixing this yourself. I've given you a stack of information thus far, ball is in your court. Every answer to every question you could possibly ask is on this site. It just sometimes takes a bit of work/reading on your part to find it.
megosu said:
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Click to expand...
Click to collapse
ok I understand.. it is just I have literally spent more than 8 hours on it and had not make any progress at all (even worse I cannot return it to the shop because of the yellow triangle).
I appreciate your help, it gives me a bit of hope but I'm in a very bad situation and I feel I have read and do so much already with no success at all.
I will try your option of restoring the one from Sammobile, I have tried other before without any luck, maybe this one will do... (5min left to DL it).
thanks again for your support
I know where you're coming from. The first flash I tried when I got my phone in 2011 borked because I was careless, and it took me a bit over a day to get the right info/files/etc to get it fixed. I know it's frustrating/tiring/annoying & you're wondering at the start whether you can even fix it. But as long as you've got download mode 99 times out of 100 you can save it.
And as I said, it's good experience; once you've fixed it, you'll be able to handle anything that comes up in future
Let us know how you go. I'm going to bed shortly, but I'm sure someone else will step up & help if you have any further problems.
You're welcome Happy to point you in the right direction.
I have flashed the rom, the exact same one as I had before everything happened...
if it helps, I flashed it from Odin 3.04 as PDA.
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5
I'm now back to the Samsung GALAXY S2 GT-I9100 logo and nothing happens.
I cannot use recovery mode,
I can use DL mode (it shows 11 counts and current binary as Samsung official.)
update:
I left the phone on the first logo for about 5min and it moved to the next Samsung Galaxy S2 logo, with the big animated S.
I'm waiting but nothing else is happening.
I'm still desperate to fix it.
One thing which can be relevant, whenever I try to wipe or format /data from CWM, my phone is restarting after a few minutes or is saying it cannot be done.
I can format /cache and /system.
Could it be the root cause ? Any way of fixing it ?
Thank you
update: I cannot mount /data from CWM, it says Error mounting /data!
is it the brick bug ? :|
Easy now....your device is still good.
Those animations should take like 1-2 mins when you flash a rom.
Now, you are completly sure that you are actually flashing the right ROM for your device model?
If so, just keep flashing stock roms until you're up and running again, so you can start from scrap.
I tried, the issue is as soon as I flash a stock rom (through Odin), then I can't get into stock recovery mode anymore, I have to flash GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar to get back the recovery mode.
I tried to flash several times, I think it is down to the fact I cannot mount or format /data.
Which is why I'm wondering if it is the famous brick bug.
My device is GT-I9100 and I took the stock rom from sammobile:
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 which is ICS 4.0.4 (that I had before trying to move to CM9.1 and having all this mess in my hands.)
flash this:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/.
you are on siyah kernel right?
what you wanna do know is to get to whatever rom your flashing, forget about cmw for now.
this also might help:
http://forum.xda-developers.com/showthread.php?t=1457458
So it is not lost yet ? Not the brick bug ?
just to be sure:
you want me to install through Odin: Siyah-s2-v5.0.1-CWM.zip
then going back to DL mode
I flash through Odin: I9100XXLSJ_I9100OXXLS1_OXX.zip (coming from your link).
anything I'm missing (even if it seems obvious, please let me know as I'm maybe missing something important)
?
I still cannot do Factory reset... is it a problem ?
I dunno what kernel you are using, If stock 4.0.4 kernel you should flash siyah first (safe kernel, no brick bug), and then countinue flashing the ROM. Check out the brick bug thread in general SII forum for directions if you want.
BTW, Odin recognizes your phone right? Check it out, you'll get a huge long breath.
BTW 2: you don't have any kies applications running in your pc.....am I right? if so, CLOSE THEM ALL!
I did had stock 4.0.4 kernel when I first tried to follow CM9.1 wiki, and I did a factory reset through CWM... which is why I think I might have bricked it...
I have checked the brick bug thread (too late it seems...) but so far I can't be sure if I'm in this case or not as they say they can't even reach DL mode, and I can.
Odin recognizes my phone, yes, but anything I flash is stuck on the animated logo.
I do not have Kies installed, just installed the drivers.
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good:
Hi,
i recently installed CM on my samsung s3 using the installer. All went all. Until after about 2 weeks, the phone was not charging correctly. So i went into the settings and performed a factory reset. No i had not installed or used clockworks to back up my phone. This left my phone in an unusaul state, where there was no home screen, i could not access my apps, although i could access the quick settings tab. Moving on....i followed a guide to try and restore my phones orginal rom using odin. According to odin all was successful, however my phone was stuck in a boot loop and so would not continue into phone. i read up and saw if i installed clockwork i could wipe cache and this might help the phone. so i installed clockwork using odin again. however when i try and access clockwork through the recovery mode, it only loads into odin mode? so i am unable to load clockwork as well i think. I am very new and this and i know i have probably made many mistakes but we learn through our mistakes. So my question is: Could someone please help me get my phone back to its orginal state!? Thankyou very much for anyone that can offer their time and help,
Nick
This May Help You
nick140795 said:
Hi,
i recently installed CM on my samsung s3 using the installer. All went all. Until after about 2 weeks, the phone was not charging correctly. So i went into the settings and performed a factory reset. No i had not installed or used clockworks to back up my phone. This left my phone in an unusaul state, where there was no home screen, i could not access my apps, although i could access the quick settings tab. Moving on....i followed a guide to try and restore my phones orginal rom using odin. According to odin all was successful, however my phone was stuck in a boot loop and so would not continue into phone. i read up and saw if i installed clockwork i could wipe cache and this might help the phone. so i installed clockwork using odin again. however when i try and access clockwork through the recovery mode, it only loads into odin mode? so i am unable to load clockwork as well i think. I am very new and this and i know i have probably made many mistakes but we learn through our mistakes. So my question is: Could someone please help me get my phone back to its orginal state!? Thankyou very much for anyone that can offer their time and help,
Nick
Click to expand...
Click to collapse
This link may help you. fix-s3-to-factory-unroot-stock-recovery-t2323847. Do it at your on risk.
Dear community,
To flash my phone, I followed this post: http://forum.xda-developers.com/showthread.php?t=2118645
So I installed CWM Recovery, I rebooted into recovery, I did a backup of the phone, I wiped the phone and I installed the ROM provided. Unfortunately, my phone isn't working anymore (I think it is soft bricked as the start screen does pop up).
Loading the recovery however, did not work either.
What did I do wrong? How can I go back to my old Gingerbread OS or the CM 9.1?
Help would greatly be appreciated!
Edit: So right now I'm trying to follow the unbrick tutorial here: http://forum.xda-developers.com/showthread.php?t=1551156
But does anyone have help for flashing the phone again? What did I forget?
Vinnni
unbrick
So, I tried to unbrick it but it seems to not be working with the tutorial here, so I used this:
youtube com/watch?v=ELeDUwa9c34
So far, so good. Unbricked the phone now. But how do I flash it? I really want to get rid of my Gingerbread...