Related
Hi all, I hope you guys can help as I'm coming up blank here after days of trying to fix this.
First, yes I read this thread and a few people were reporting the same problem but the solution was always to flash a stock firmware with odin.
Right now my wife's phone is stuck in a boot loop, she doesn't do anything out of the ordinary with it, I rooted it when she first got it 3 months ago and then flashed a stock kernel to get rid of the yellow triangle and it has worked perfectly until last week when she told me it was stuck at the galaxy s2 logo. No problem I though, I'll just flash a stock rom with odin and all will be well.
Well it didn't work out that way, I've flashed the original firmware, an ICS leak, Villainrom 1.1 and XXKI3 multiple times, with and without pit file + re-partition. I've flashed the old bootloader and I've tried a few custom kernels as well, and multiple combinations of the above. Nothing is getting it past the boot loop. The only result I've had that is any different to how I started is with an ICS build I got a screen saying kernel panic upload (or something like that, I don't have that rom flashed at the moment). When I connect at this time odin recognises the phone so I guess it's in download mode.
I can't get into recovery mode so I can't do a factory reset, when I press vol-up, home and power I get a blank screen for a moment followed by the same boot loop. I can get into download mode and odin is reporting successful on every flash. When I flash a custom rom or kernel I get the yellow triangle, it goes away when I flash a stock rom or kernel.
According to my wife just before the crash android market reported updates available and she installed them. I don't know if that's related or not but she says when she went back to the phone it had hung so she turned off the phone, upon turning it on it was stuck in boot (the big animated purple S part of the boot) so she removed the battery and since then it doesn't get past the initial galaxy S2 screen, sometimes, depending on which kernel it's on, the galaxy screen goes blank for a second or two and then the logo comes back.
I've really tried everything I can think to try, warranty isn't really an option as I'm in Saudi Arabia and I've been told it will take 3 months to get the phone back, also I can't easily access a jig, I'd have to make one and I'm not too confident in my ability to do that.
If anyone has any ideas at this point please help, I can't think of anything else I can do here.
tl;dr random boot loop, tried flashing everything I can find, no recovery mode but download mode works fine, help!
davegene said:
If anyone has any ideas at this point please help, I can't think of anything else I can do here.
Click to expand...
Click to collapse
Flash a full wipe firmware and see if that helps, if you need one there is a link at the bottom of my insecure kernel thread.
Thanks Odia,
I just flashed the firmware at the bottom of your thread, I9100XWKE7_CL215725_REV02_user_low. Tried it twice for good measure.
Unfortunately nothing has changed on the phone, still can't get into recovery or past the galaxy s2 logo.
davegene said:
Thanks Odia,
I just flashed the firmware at the bottom of your thread, I9100XWKE7_CL215725_REV02_user_low. Tried it twice for good measure.
Unfortunately nothing has changed on the phone, still can't get into recovery or past the galaxy s2 logo.
Click to expand...
Click to collapse
Have you tried with repartition and update bootloader ticked?
I didn't tick either of those this time but I have ticked repartition with a different firmware that came with a pit file. Do I need a pit file or can I tick repartition without it?
Sent from my GT-I9100 using XDA App
davegene said:
I didn't tick either of those this time but I have ticked repartition with a different firmware that came with a pit file. Do I need a pit file or can I tick repartition without it?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
You need a pit file, use the 1 from the other firmware.
Ok, I just tried XWKE7 again with a pit file with re-partition ticked. Also tried flashing the old bootloader again with update bootloader ticked.
No change I'm afraid.
davegene said:
Ok, I just tried XWKE7 again with a pit file with re-partition ticked. Also tried flashing the old bootloader again with update bootloader ticked.
No change I'm afraid.
Click to expand...
Click to collapse
Most strange, look like your off to service
That's most unfortunate, I'm in Saudi Arabia and they have quoted 3 months to get the phone back under warranty although in reality I'd be lucky to get it back at all.
Are my options really exhausted or is there anything extreme I can try?
I ended up making a jig and took it for warranty repair and they were able to do it locally, it only took a few days.
The curious thing is even though I repartitioned several times using two different pit files the sdcard partition was still intact.
I'm pretty sure I was doing it right and the yellow triangle was coming and going as I was flashing stock and custom kernels so the flashes were taking.
I don't speak Arabic so I couldn't ask how they fixed it but what do you think was the problem? I was very surprised to find the data intact, it even had the same stock ROM that I flashed before I took it for service still installed.
Anyway thanks for your help in this thread odia.
Sent from my GT-I9100 using xda premium
I'd love to know what they did.
Sent from my GT-I9100 using XDA App
ok, I need some help here..
was running rooted ics roms for weeks now, and was trying to go to the new cm 9 nightly today.
I was using twrp for recovery, and it would not flash that way, so I went back to cwm recovery.
Then, I tried to flash h0tw1r3's version of cm9 first, then I would flash the new cm 9 nightly; never got to that point..
After flashing that, i went into a boot loop, so i want back to cwm, and tried to wipe, and flash it again, but I got locked up in cwm, with no menus at all..
Well, I decided to just Odin back to factory, which didn't work; both rooted stock GB, and unrooted stock GB...I am not a veteran of odin,and, since I am on a mac, I ran it in a virtual machine, the same way I originally did it when I got the phone months ago. It goes through all the steps that make it look like it worked, but, once the phone reboots, I get the first and second "samsung" screens, but then the screen just stays black, and nothing happens..
I can get into download mode, and, flash via odin, and it says "success", and looks like it should work, but it doesn't...
Can anyone suggest something else to try, or, maybe the proper .tar file to try?
I think my phone is probably still on an ICS leak, and that might be the problem. but, obviously, I can't get it to boot, no matter what I flash through Odin..
Thanks so much to anyone who can help..I am hoping I don't have a brick,which I don't think I have, since I can get into download mode with no problems...
EDIT: Got it to work with a stoick tar from Dar8!!
Good job
thanks..
wase4711 said:
thanks..
Click to expand...
Click to collapse
cool beans...can ya put solved in the title sir...thx
bigjoe2675 said:
cool beans...can ya put solved in the title sir...thx
Click to expand...
Click to collapse
done...thanks for reminding me!
So, this all started last year when i wanted to disable updates. For the life of me, i cant remember what i did but there have been no updates. Recently, I have been getting the OTA notification to update. So i did that and when it installs it gives an error at 26%. My phone is rooted and has USB debugging on so i put it in download mode and tried to use ODIN to update it with both the stock firmware and KitKat. they both failed. Today, I tried to do it again but added the file to BL instead of AP in ODIN. Now my phone gives the "Firmware upgrade encountered an issue" screen. I tried to use Kies to fix it but it doesnt connect when this screen is up. When i restart the phone in download mode, then my computer detects the device.
I have a ATT gs4 model SGH-I337
Please HELP!
tbsrules2 said:
So, this all started last year when i wanted to disable updates. For the life of me, i cant remember what i did but there have been no updates. Recently, I have been getting the OTA notification to update. So i did that and when it installs it gives an error at 26%. My phone is rooted and has USB debugging on so i put it in download mode and tried to use ODIN to update it with both the stock firmware and KitKat. they both failed. Today, I tried to do it again but added the file to BL instead of AP in ODIN. Now my phone gives the "Firmware upgrade encountered an issue" screen. I tried to use Kies to fix it but it doesnt connect when this screen is up. When i restart the phone in download mode, then my computer detects the device.
I have a ATT gs4 model SGH-I337
Please HELP!
Click to expand...
Click to collapse
flash a stock rom and then fastboot flash your stock recovery, then update your phone the update should be triggered in the stock recovery,with a custom recovery, it won't work
the only other easy way around this besides doing what I said is to look for a firmware thread for your device and flash the firmware as a op who has tested it states.
toolhas4degrees said:
flash a stock rom and then fastboot flash your stock recovery, then update your phone the update should be triggered in the stock recovery,with a custom recovery, it won't work
Click to expand...
Click to collapse
Thank you so much for your help! When i try to do this, i get an error. I received this error before as well when trying do this with both the update and the one that came stock. Please see attached image.
tbsrules2 said:
Thank you so much for your help! When i try to do this, i get an error. I received this error before as well when trying do this with both the update and the one that came stock. Please see attached image.
Click to expand...
Click to collapse
try this http://www.androidrootz.com/p/galaxy-s4-stock-firmwares.html
then use your previous unlock/root method after upgrading
toolhas4degrees said:
try this http://www.androidrootz.com/p/galaxy-s4-stock-firmwares.html
then use your previous unlock/root method after upgrading
Click to expand...
Click to collapse
So i did that but still got an error. I think that one of the reasons why it was messing up before is an issue with Kies blocking the port from opening. So i closed that out per the below thread.
http://forum.xda-developers.com/showthread.php?t=1622790
But it started and the status bar on my phone is now blue (which is what how this bigger issue started before) I found this other link that kind of fits whats going on. Should i just follow the PIT instructions from here and of course just restart my phone again?
http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
tbsrules2 said:
So i did that but still got an error. I think that one of the reasons why it was messing up before is an issue with Kies blocking the port from opening. So i closed that out per the below thread.
http://forum.xda-developers.com/showthread.php?t=1622790
But it started and the status bar on my phone is now blue (which is what how this bigger issue started before) I found this other link that kind of fits whats going on. Should i just follow the PIT instructions from here and of course just restart my phone again?
http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
Click to expand...
Click to collapse
I think you may want to pm the developer of kies to solve your issue, since I don't have your device, that's about as much help as I can be.
toolhas4degrees said:
I think you may want to pm the developer of kies to solve your issue, since I don't have your device, that's about as much help as I can be.
Click to expand...
Click to collapse
UPDATE: so my phone is actually booting now since i re-partitioned it. As i am trying to update to the latest firmware i am still getting an error.
What update were you on before you started? And there's a newer update or 2 past NB1 now.
Sent from my One using XDA Premium 4 mobile app
es0tericcha0s said:
What update were you on before you started? And there's a newer update or 2 past NB1 now.
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Im pretty sure i was at 4.3. So everything was working and then i found a random article saying that with the ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 update, you have to put in the PIT file again. So i did that and now my phone turns on and says custom, but then shuts off. I can go into download mode and recovery. I tried to factory reset everything but to no avail.
tbsrules2 said:
Im pretty sure i was at 4.3. So everything was working and then i found a random article saying that with the ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 update, you have to put in the PIT file again. So i did that and now my phone turns on and says custom, but then shuts off. I can go into download mode and recovery. I tried to factory reset everything but to no avail.
Click to expand...
Click to collapse
Hmm, the pit might be why you're having issues. Most updates don't need the separate pit file. If it's needed, it's often packaged in the main tar file. I would just redo the Odin flash without pit and factory reset afterwards.
es0tericcha0s said:
Hmm, the pit might be why you're having issues. Most updates don't need the separate pit file. If it's needed, it's often packaged in the main tar file. I would just redo the Odin flash without pit and factory reset afterwards.
Click to expand...
Click to collapse
When i try to do this, it says "Fail" is there a way that I can contact you directly?
Ill give whoever helps me with this $10 tonight via paypal
tbsrules2 said:
When i try to do this, it says "Fail" is there a way that I can contact you directly?
Ill give whoever helps me with this $10 tonight via paypal
Click to expand...
Click to collapse
What step does it fail at?
My contact info is in my signature.
es0tericcha0s said:
What step does it fail at?
My contact info is in my signature.
Click to expand...
Click to collapse
I private messaged you
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im guessing you wiped device and if you go into recovery and try to reboot system it will tell you no os installed if that is the case you can plug device into computer and still use twrp as file manager thats if you had a backup stored on desktop or drag a CM zip to device .
other method of course would be to enter download mode and use odin to flash stock firmware for your device not sure if you have t399 or the N varient lastest beening OH2/OH3 you can find that in my filehost i have stock odin zips to flash.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Koohara947 said:
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Click to expand...
Click to collapse
Which stock rom did you use?
_PAG_ said:
Which stock rom did you use?
Click to expand...
Click to collapse
I used the download from this guide by ShabbyPenguin: http://androidforums.com/threads/guide-restore-your-galaxy-light-to-stock-mja.846767/
Hey guys...I did the same thing but my t399 must have lost battery charge because when I picked it back up, it was dead...I plugged in and it started flashing the Samsung screen slowly at me. It would not reboot. I did get download and twrp to show up and start to atleast work enough to flash and Odin again...I used Shabby's kernel source and it is still doing the same thing after flashing through Odin. Still stuck on Samsung screen slowly flashing and recovery shows no operating system. I'm about to put it back in a drawer but I feel it's so close that I had to ask for help. I flashed shabby work to root and recovery. I flashed twrp 2.7 and the cm12 beta rom. Then back to shabby guide to get it to recognize, it did..kind of..but still boot looped. Flashed 3 times... No changes. Can anyone help or is it time for a staircase? hA!
Oh yes .. I don't think the battery is bad.. I checked it with a meter and it reads voltage. It does get pretty hot while I'm working on it though and my pc shows its charged at 100% but the phone doesn't show that...it stays in like dead mode. Nit recognizing again. Anybody have suggestions? In recovery it also indicated it can not locate most of my files in read after I flash.. what am I doing wrong.
sgh-399n bootloop
It's taken me 2 months to cry for help. I'm not a complete noobie, but I'm completely exhausted. First of all, one morning I woke up and I thought that somehow my battery was dead. It wasn't. Eventually, I found it in a bootloop. This phone was working fine, running a "Tiger_Lilly" ROM the night before. I've tried everything using Odin, adb and fastboot (I'm not sure how to get the phone in fastboot mode and also, before using Odin, TWRP wouldn't mount/data.) I'm stumped. Would appreciate some help, thank you.
HELP...!!!
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Fidelacho16 said:
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Click to expand...
Click to collapse
What was you using prior to it bootlooping and what rom was installed have you modifed anything else such as partions etc...
also list your method and link rom your trying. just wondering if its the lastest version for device. while in odin also make sure Auto Reboot” and “F. Reset Time is only selected and what version of odin are you using?
If your unable to flash any rom thru odin then there must be a major problem else where until we can narrow it down no one can assist you.
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Fidelacho16 said:
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Click to expand...
Click to collapse
Ok try this version of odin 3.0.7 which i added as attachment also i linked my firmware OH3 as you stated your device is t399n i know sammobile takes long to download so this may be faster for you Link HERE
as stated previously make sure only thing selected is Auto Reboot” and “F. Reset Time and add tar file into PDA.
I await your reply if fails i send you adb fastboot etc may be able to grab some logs see whats happening
im using cm12 archidroid 3.5.14 and decided to update to 3.5.15 version last night. but the update didnt went well, something went wrong and i got 'recursive' error, and it started to boot loops.
i tried so many solutions, i odin this and that and nothing worked. i downloaded cwm 6.0.0.47 i think, and managed to install the AD rom, but now im stuck at languange selection, i cant select anything because screen support isnt working
what do i do now?
Samsung S3 i9300
You did "odin this and that"? That's never a good idea. Just saying...
I would try to flash latest AD again but with a proper up-to-date recovery e.g. latest TWRP after making a nandroid backup.
Hawaiihemd said:
You did "odin this and that"? That's never a good idea. Just saying...
I would try to flash latest AD again but with a proper up-to-date recovery e.g. latest TWRP after making a nandroid backup.
Click to expand...
Click to collapse
thanks for the reply Hawaiihemd
i downloaded the stock firmware of i9300 and odin that .tar.md5. Now it just stuck at samsung logo
I would try to flash latest AD again but with a proper up-to-date recovery
Click to expand...
Click to collapse
how do i do that? where do i get latest uptodate recovery? at least point me to right directions thanks so much
ricvai7 said:
thanks for the reply Hawaiihemd
i downloaded the stock firmware of i9300 and odin that .tar.md5. Now it just stuck at samsung logo
how do i do that? where do i get latest uptodate recovery? at least point me to right directions thanks so much
Click to expand...
Click to collapse
Well then, if you already flashed stock rom via odin, your data is already gone. Make sure your phone is working on stock first now. Please be aware that the first boot after each rom flash might take up to 15 min or so because the cache has to be built at first boot!
You can find the link to TWRP recovery in my signature (see My Gadgets). I suggest your read the tutorials that are linked there also for more information.
thanks again, glad to hear there's still hope. i will do as you advised.
So, in order to get stock firmware flashed and running, can i use twrp-2.8.6.1-i9300.tar from your signature?
1st i odin the twrp-2.8.6.1-i9300.tar, and then reboot into download mode, and odin firmware stock?
in that order? i havent done this in a long time, i've been using AD for so long without any problem, i dont really exactly remember how. i just concern about the touch screen not functioning, i really hope no hardware failures. i never experience anything like this, even in recovery mode, the touch screen doesnt work, i had to flash entire process using up/down and power button
right now i havent done anything since the last attempt ( flashed stock rom, and stuck at samsung logo )
currently., im charging the battery, will try get it up and running after the battery is full
thanks mate
ricvai7 said:
thanks again, glad to hear there's still hope. i will do as you advised.
So, in order to get stock firmware flashed and running, can i use twrp-2.8.6.1-i9300.tar from your signature?
1st i odin the twrp-2.8.6.1-i9300.tar, and then reboot into download mode, and odin firmware stock?
in that order? i havent done this in a long time, i've been using AD for so long without any problem, i dont really exactly remember how. i just concern about the touch screen not functioning, i really hope no hardware failures. i never experience anything like this, even in recovery mode, the touch screen doesnt work, i had to flash entire process using up/down and power button
right now i havent done anything since the last attempt ( flashed stock rom, and stuck at samsung logo )
currently., im charging the battery, will try get it up and running after the battery is full
thanks mate
Click to expand...
Click to collapse
i've managed to odin stock rom. everything is ok now
the problem remain is no touch screen. how can i fix it?
FYI i sent my phone to replaced the screen 4-5 days ago , but everything was ok, no problem until i failed flashed rom it started to lose touch screen. how can i fix this?
thanks !
ricvai7 said:
i've managed to odin stock rom. everything is ok now
the problem remain is no touch screen. how can i fix it?
FYI i sent my phone to replaced the screen 4-5 days ago , but everything was ok, no problem until i failed flashed rom it started to lose touch screen. how can i fix this?
thanks !
Click to expand...
Click to collapse
i havent solved the problem with touch screen. can anybody help?