You can root your HTC desire 816g mt6582 (not the octa-core version) manually by flashing a recovery and then using the flashable SuperSU zip file.
This process worked for my device and I am not responsible for any harm caused by this process to your device.
Requirements:
1. Android SDK or minimalistic ADB & Fastboot
2. Recovery image
3. SuperSU package
4. Patience
Download CWM recovery from the link given below:
https://drive.google.com/file/d/0B4bhG1oL3GeKZ3ZBMW53bW9NWUE/view?usp=sharing
Download SuperSu package and place it in root folder of SD card. (Not in Internal memory as CWM recovery for this device doesn't access internal memory for now.)
https://download.chainfire.eu/696/supersu/
Installation Steps:
1. Connect device in debugging mode to your PC/system with adb and fastboot tools.
2. Use the below command to boot into fastboot mode:
adb reboot bootloader
3. Use the below command to flash the downloaded recovery image to device:
fastboot flash recovery Name_of_recovery_file
4. After flashing recovery you have to use the hardware keys to boot into recovery.
5. Use the volume buttons to navigate in recovery and power button to select an option.
6. Select option "Install from SD Card"
7. Select the SuperSu package in SD card.
8. Confirm the installation.
9. If the installation is successful reboot your device and you should see the SuperSu app in the device's App Drawer.
Download link for minimal adb and fastboot
https://www.androidfilehost.com/?fid=24052804347803384
N.B.
If you only want to install custom recovery then follow installation instructions till step 5 and reboot.
Install Recovery for only one boot
Some users may not want to install custom recovery over stock but have to use custom recovery for flashing. They can change the command in Step 3 to this new command and proceed.
fastboot boot recovery Name_of_recovery_file
Please go through the steps carefully before proceeding.
All the best.
Proceed with caution and only if you know the risks of anything going wrong.
Sam63 said:
You can root your HTC desire 816g mt6582 (not the octa-core version) manually by flashing a recovery and then using the flashable SuperSU zip file.
This process worked for my device and I am not responsible for any harm caused by this process to your device.
Requirements:
1. Android SDK or minimalistic ADB & Fastboot
2. Recovery image
3. SuperSU package
4. Patience
Download CWM recovery from the link given below:
https://drive.google.com/file/d/0B4bhG1oL3GeKZ3ZBMW53bW9NWUE/view?usp=sharing
Download SuperSu package and place it in root folder of SD card. (Not in Internal memory as CWM recovery for this device doesn't access internal memory for now.)
https://download.chainfire.eu/696/supersu/
Installation Steps:
1. Connect device in debugging mode to your PC/system with adb and fastboot tools.
2. Use the below command to boot into fastboot mode:
adb reboot bootloader
3. Use the below command to flash the downloaded recovery image to device:
fastboot flash recovery Name_of_recovery_file
4. After flashing recovery you have to use the hardware keys to boot into recovery.
5. Use the volume buttons to navigate in recovery and power button to select an option.
6. Select option "Install from SD Card"
7. Select the SuperSu package in SD card.
8. Confirm the installation.
9. If the installation is successful reboot your device and you should see the SuperSu app in the device's App Drawer.
Download link for minimal adb and fastboot
https://www.androidfilehost.com/?fid=24052804347803384
N.B.
If you only want to install custom recovery then follow installation instructions till step 5 and reboot.
Install Recovery for only one boot
Some users may not want to install custom recovery over stock but have to use custom recovery for flashing. They can change the command in Step 3 to this new command and proceed.
fastboot boot recovery Name_of_recovery_file
Please go through the steps carefully before proceeding.
All the best.
Proceed with caution and only if you know the risks of anything going wrong.
Click to expand...
Click to collapse
Hello bro I want help please my device desire 816G dual 8692 I flashed twrp recovery but seems not good recovery (not fully working) and now I wiped system and no os I'
In my phone. I want please any good recovery as flash.zip to replace with currently one because not able to flash Roms and don't know how to flash any recovery without os in my phone :crying:
Use sp flash tools
medo sator said:
Hello bro I want help please my device desire 816G dual 8692 I flashed twrp recovery but seems not good recovery (not fully working) and now I wiped system and no os I'
In my phone. I want please any good recovery as flash.zip to replace with currently one because not able to flash Roms and don't know how to flash any recovery without os in my phone :crying:
Click to expand...
Click to collapse
You will have to use sp flash tools and flash your stock rom first. This is a mediatek device and I have not been able to flash recoveries through zip file but i use mtk tools. You can find a bugless twrp for your device ie:htc desire 816g mt6592 octacore version. The link is given below:
http://forum.xda-developers.com/desire-816/development/twrp-3-0-recovery-htc-816g-dual-sim-t3310931
not loading the recovery image
it is showing
error: cannot load HTC-Desire-816G-Dual-Sim_MT6582_CWM_recovery
\\
what to do plkz help- me
hey i need help in adb its showing partition 'recovery' does not support flash.
What should i do?
Related
My phone is rooted and i was modifying something in the system file then i accidentally deleted the entire system file of my phone.. My phone turned off after ive deleted and when i tried to turn it on it is stuck on boot..or the logo of my phone.. Can anyone help me recover the system file of my phone or the operating system i may say.. I have tried the android system recovery 3e and wipe/factory set my phone but still stuck on boot..im using cherry mobile flare 2.1 running on android jellybean 4.1:crying:
dexterrio14 said:
My phone is rooted and i was modifying something in the system file then i accidentally deleted the entire system file of my phone.. My phone turned off after ive deleted and when i tried to turn it on it is stuck on boot..or the logo of my phone.. Can anyone help me recover the system file of my phone or the operating system i may say.. I have tried the android system recovery 3e and wipe/factory set my phone but still stuck on boot..im using cherry mobile flare 2.1 running on android jellybean 4.1:crying:
Click to expand...
Click to collapse
you have to flash the same rom with a custom recovery you kill you android
emanuelrv said:
you have to flash the same rom with a custom recovery you kill you android
Click to expand...
Click to collapse
. Could you please tell me in details what steps should i do in order to flash the same rom.. Thanks..i really needed to get my phone back:crying:
Follow this, should work
dexterrio14 said:
My phone is rooted and i was modifying something in the system file then i accidentally deleted the entire system file of my phone.. My phone turned off after ive deleted and when i tried to turn it on it is stuck on boot..or the logo of my phone.. Can anyone help me recover the system file of my phone or the operating system i may say.. I have tried the android system recovery 3e and wipe/factory set my phone but still stuck on boot..im using cherry mobile flare 2.1 running on android jellybean 4.1:crying:
Click to expand...
Click to collapse
1. Turn off your phone.
2. Boot your phone in Recovery Mode (Volume Up + Power Button).
3. Install the zip file in the following link. h ttp: // ww w.m ediafire. com/download/sh541l2u2e78vl6/CWM6.0.27.z ip (DELETE ALL SPACES )
4.Reboot into the custom recovery you have just installed.
5.Go to toggle signature verification and check if it is enabled or disabled. If it is enabled, you HAVE TO disable it.
6. Select ROM.zip from your phone memory and flash it.
7.If you do not have the rom on your phone(The same ROM of which you deleted the system folder), then mount the usb storage from recovery with your phone connected to the PC. Transfer files to the usb storage or phone storage, which ever is convenient.
8.Boot into Recovery and flash the ROM.
9.Reboot phone and WAIT.
Let me know if that works :good:
System file delete on Your Root Phone
Am follow same condition as you, but bro you need to add new rom on its.your phone is rooted as well so you are able to add new rom on your handset, other wise you go to mobile care center they will flash ur handset and ur set will ok. :laugh:
Mobile Care Center ? Noo
MrJaswal said:
Am follow same condition as you, but bro you need to add new rom on its.your phone is rooted as well so you are able to add new rom on your handset, other wise you go to mobile care center they will flash ur handset and ur set will ok. :laugh:
Click to expand...
Click to collapse
Mr.Jaswal, if he really had to go to the mobile care center, he wouldn't be participating the XDA Forums. People go to the mobile care center only when their phone is hard bricked, and i do not think that is the case here. I'm sure the problem can be solved.
Reflash stock ROM again.You will get your system back.
Sent from my Xperia Arc using XDA Free mobile app
Shreyas_Singh said:
1. Turn off your phone.
2. Boot your phone in Recovery Mode (Volume Up + Power Button).
3. Install the zip file in the following link. h ttp: // ww w.m ediafire. com/download/sh541l2u2e78vl6/CWM6.0.27.z ip (DELETE ALL SPACES )
4.Reboot into the custom recovery you have just installed.
5.Go to toggle signature verification and check if it is enabled or disabled. If it is enabled, you HAVE TO disable it.
6. Select ROM.zip from your phone memory and flash it.
7.If you do not have the rom on your phone(The same ROM of which you deleted the system folder), then mount the usb storage from recovery with your phone connected to the PC. Transfer files to the usb storage or phone storage, which ever is convenient.
8.Boot into Recovery and flash the ROM.
9.Reboot phone and WAIT.
Let me know if that works :good:
Click to expand...
Click to collapse
I dont have a stock rom for my phone..can i try to flash a new rom for my phone with the same version of my os.. Will it work?
dexterrio14 said:
I dont have a stock rom for my phone..can i try to flash a new rom for my phone with the same version of my os.. Will it work?
Click to expand...
Click to collapse
Yes you can, as long as your phone is rooted.But make sure you use a custom recovery and not the stock recovery .Meaning,you have to flash another recovery like CWM Recovery. And please disable signature verification. Let me know what happens Reset to factory settings and do a full wipe before doing anything else though
Shreyas_Singh said:
Flash the same custom ROM you were using before. But make sure you use a custom recovery and not the stock recovery IF you get an error while flashing. And please disable signature verification. Let me know what happens
Click to expand...
Click to collapse
how can i access custom recovery mod?....i can access stock recovery but not custom recovery.. should i install the cwm.zip file first to access custom recovery mod?
CustomRom
dexterrio14 said:
how can i access custom recovery mod?....i can access stock recovery but not custom recovery.. should i install the cwm.zip file first to access custom recovery mod?
Click to expand...
Click to collapse
Yes, install the CWM.zip via stock recovery first. Find the right version for your phone.This one:
h ttp://ww w.mediafire.com/download/sh5 41l2u2e78vl6/CWM6.0. 27.z ip (Delete the spaces and use link)
After you have done that, you can flash a custom rom like this one:
h ttp://w ww.mediafire.co m/download/cxec9dz9be86icc/DarkBoid+ROM+by+Santo_Rock.zi p(Delete spaces in link)
Let me know the satus after that :good:
REMEMBER: Disable signature verification from the recovery menu of the CWM recovery
Shreyas_Singh said:
Yes, install the CWM.zip via stock recovery first. Find the right version for your phone.This one:
h ttp://ww w.mediafire.com/download/sh5 41l2u2e78vl6/CWM6.0. 27.z ip (Delete the spaces and use link)
After you have done that, you can flash a custom rom like this one:
h ttp://w ww.mediafire.co m/download/cxec9dz9be86icc/DarkBoid+ROM+by+Santo_Rock.zi p(Delete spaces in link)
Let me know the satus after that :good:
REMEMBER: Disable signature verification from the recovery menu of the CWM recovery
Click to expand...
Click to collapse
for instance i have successfully installed the cwm.zip file via stock recovery.. If i long press the volume up +power will it be still in stock recovery or in clockworkmod recovery already?
dexterrio14 said:
for instance i have successfully installed the cwm.zip file via stock recovery.. If i long press the volume up +power will it be still in stock recovery or in clockworkmod recovery already?
Click to expand...
Click to collapse
If that's the way your phone goes into recovery , then it will go into the custom recovery. You will not have the stock recovery. You won't need it
Shreyas_Singh said:
If that's the way your phone goes into recovery , then it will go into the custom recovery. You will not have the stock recovery. You won't need it
Click to expand...
Click to collapse
it say's installation aborted when i was flashing the cwm.zip file in stock recovery:crying:
dexterrio14 said:
it say's installation aborted when i was flashing the cwm.zip file in stock recovery:crying:
Click to expand...
Click to collapse
Did you disable signature verification? Do that and try. If that doesn't work either you can use fastboot to install recovery, which will 100%.
Follow these steps :
1.USB drivers for your phone must be installed on a computer.
2.Android SDK must be installed on your computer.
3.Your phone must be connected to your computer via USB.
4.The ADB and Fastboot drivers must be pasted into the folder where Android SDK is installed.
5.Navigate to the Android SDK folder,press shift and Right Click, select the Open Command Window here option.
6.Then type the following after your phone is recognized by cmd.In most cases it is.(Type this command to start fastboot : "adb reboot bootloader" and then "fastboot devices")
7.After that type the following : fastboot devices
And then : fastboot flash recovery FILE.ZIP
8.And you are done Open your custom recovery with the key combination used to open your stock recovery.
Let me know if it worked.
Shreyas_Singh said:
Did you disable signature verification? Do that and try. If that doesn't work either you can use fastboot to install recovery, which will 100%.
Follow these steps :
1.USB drivers for your phone must be installed on a computer.
2.Android SDK must be installed on your computer.
3.Your phone must be connected to your computer via USB.
4.The ADB and Fastboot drivers must be pasted into the folder where Android SDK is installed.
5.Navigate to the Android SDK folder,press shift and Right Click, select the Open Command Window here option.
6.Then type the following after your phone is recognized by cmd.In most cases it is.(Type this command to start fastboot : "adb reboot bootloader" and then "fastboot devices")
7.After that type the following : fastboot devices
And then : fastboot flash recovery FILE.ZIP
8.And you are done Open your custom recovery with the key combination used to open your stock recovery.
Let me know if it worked.
Click to expand...
Click to collapse
Do i need to download the adb and Fastboot Drivers? Or is it already inside the file of Android Sdk but it must be installed first..
Shreyas_Singh said:
Did you disable signature verification? Do that and try. If that doesn't work either you can use fastboot to install recovery, which will 100%.
Follow these steps :
1.USB drivers for your phone must be installed on a computer.
2.Android SDK must be installed on your computer.
3.Your phone must be connected to your computer via USB.
4.The ADB and Fastboot drivers must be pasted into the folder where Android SDK is installed.
5.Navigate to the Android SDK folder,press shift and Right Click, select the Open Command Window here option.
6.Then type the following after your phone is recognized by cmd.In most cases it is.(Type this command to start fastboot : "adb reboot bootloader" and then "fastboot devices")
7.After that type the following : fastboot devices
And then : fastboot flash recovery FILE.ZIP
8.And you are done Open your custom recovery with the key combination used to open your stock recovery.
Let me know if it worked.
Click to expand...
Click to collapse
In the command: fastboot flash recovery FILE.ZIP...is it really FILE.ZIP that i will input or CWM.Zip or TWRP.Zip?
dexterrio14 said:
In the command: fastboot flash recovery FILE.ZIP...is it really FILE.ZIP that i will input or CWM.Zip or TWRP.Zip?
Click to expand...
Click to collapse
CWM.zip is what you will input. The name of the CWM.zip should match the command. Or you will need to change the zip file name to CWM.zip if it is named something else
Shreyas_Singh said:
CWM.zip is what you will input. The name of the CWM.zip should match the command. Or you will need to change the zip file name to CWM.zip if it is named something else
Click to expand...
Click to collapse
After the command: fastboot flash recovery CWM.zip.. Should i reboot my phone? ..or just turn it off and make the key combinition to access the stock recovery..or custom recovery if successful
dexterrio14 said:
After the command: fastboot flash recovery CWM.zip.. Should i reboot my phone? ..or just turn it off and make the key combinition to access the stock recovery..or custom recovery if successful
Click to expand...
Click to collapse
by the way ..how can i disable signature verification?
Today i was finding the method to root My friend's Micromax Canvas 4 A210, i downloaded the many files and drivers for rooting but unable to do so, then i tried SP Tool too, but unable to flash recovery, the problem is with the drivers, Then i found that this device has fastboot mode, we just need a custom recovery for rooting any android phone then just install superuser or supersu via that custom recovery. then i boot this device is fastboot and flash the custom cwm recovery. so i just want to share this with all of you, because i didn't found this method anywhere.
Files Required:
1. Fastboot
2. CWM Recovery for canvas 4 (should be *.img format )
3. Superuser/Supersu zip
Google them and you will find them.
Steps:
1. Reboot the device in the fastboot mode.
2. Connect the device with PC
3. Copy the recovery.img in the fastboot folder.
4. The press SHIFT and right click in the folder and select open command prompt.
5. Now check whether PC is recognize the device or not by executing command :
Code:
Fastboot devices
6. Above command will show you the fastboot devices connected to the pc.
7. Now flash the recovery, by command:
Code:
Fastboot flash recovery Name_of_recovery.img
8. Now reboot the device in the recovery mode and install supersu.zip / superuser.zip via recovery.
below is the video i created, might be a little blurry.
https://www.youtube.com/LapoLdLSHN0
HELP
I think i flashed wrong twrp recovery on my micromax canvas 4 A210. Now the phone boots up but i cant access the storage, neither internal sd card nor external. The sim is also not getting detected. Please help.
How can I lock the phone back after unlocking bootloader, rooting, installing Xposed?
Wipe installed custom ROM (System+data+cache+dalvik).
**Internal storage optional (You may have to flash TWRP again though).
Install MIUI recovery ROM pack through TWRP. Run MIUI initial setup. Reboot to fastboot and flash stock recovery, you can find stock recovery in MIUI forums. After that check for successful flash and successful system boot. Only then run the fastboot command to lock the bootloader :
fastboot oem lock
**Do not lock with TWRP. You'll hard brick your phone
***After flashing MIUI in TWRP flash lazyflasher or your device will be stuck
If you don't understand the complications in this method please ignore it, am sure there are some easier ways using MiFlash. Check MIUI forum for relocking and recovering to MIUI. If you wanna come back to the world of custom ROMs and Mods XDA is the place.
ArK96 said:
Wipe installed custom ROM (System+data+cache+dalvik).
**Internal storage optional (You may have to flash TWRP again though).
Install MIUI recovery ROM pack through TWRP. Run MIUI initial setup. Reboot to fastboot and flash stock recovery, you can find stock recovery in MIUI forums. After that check for successful flash and successful system boot. Only then run the fastboot command to lock the bootloader :
fastboot oem lock
**Do not lock with TWRP. You'll hard brick your phone.
Click to expand...
Click to collapse
Thank You
BTW If you have the time could you write this more in steps like for a noob. If not it still kicks a$$ and thanks for reply
First you need to get rid of your current ROM and it's data. For that boot into TWRP and select wipe, in the list of partitions displayed select :
•System
•Data
•Cache
•Dalvikand confirm wipe. This step removes the ROM and data associated with it. Now the only thing you can access is TWRP and fastboot.
Also during wipe you can also select to wipe Internal Storage partition but after you do this you may lose TWRP also at the next boot. Now your phone can only boot into fastboot mode. So if you did wipe your internal storage also flash TWRP again from fastboot. If you ask how..:
•Download TWRP recovery from here
•Copy the downloaded file to any folder on your PC.
•Install ADB and fastboot drivers on your PC if you haven't.
•Reboot phone into fastboot mode(Power + Volume down) and connect to PC.
•Go to folder where your placed the TWRP image file.
•Open command prompt in that folder (Shift+right click mouse, open command window here)
•Type the following commands without the quotes :
" fastboot flash recovery twrp-3.2.1-0-mido.IMG "
•Now try rebooting into TWRP (Power + Volume Up). If you followed the steps right you should be able to.Remember this step is only if you decide to wipe internal storage also else it is completely not necessary.
OK now that you are left with a phone that only has TWRP we need a ROM to boot into, in your case you want a MIUI ROM. Download latest stable MIUI recovery ROM pack from MIUI website or just google if your having trouble finding it. For MIUI ROMs to successfully boot on a custom recovery you need to flash an additional zip called lazyflasher else your phone will be stuck at the MI logo. I'll attach the zip below. Okay so now since you have the required files copy them to your phone's internal storage.
Boot into TWRP and install the MIUI ROM zip first and the Lazyflasher zip after that. Reboot into system and phone should enter MIUI initial setup in some minutes(be patient MIUI initial boot can be long). Finish the setup.
Now you need to flash the latest stock recovery of your phone. I don't have it with me now so a simple google search will do the work. The procedure for flashing the recovery is the same as flashing TWRP which I have mentioned above. The only change you have do in the fastboot command line is the file name of your stock recovery.
After flashing check for successful boot, only then proceed with the relocking procedure as follows:
•Boot phone into fastboot mode
•Connect to PC
•Open Command prompt
•Type this fastboot command without the quotes :
" fastboot oem lock"•Once done reboot your phone.
Now you must have a relocked phone.
**Never relock your phone with any custom mods like custom recovery, custom ROM or even a MIUI which is rooted. Also be on 100% stock configuration before relocking device. Failing to do so will result in a hard brick.
***ATTACHED FILES ARE NOT MY WORK. CREDITS GO TO THEIR RESPECTIVE CREATORS.
This TWRP & TWRP Installer is Unofficial.
Official TWRP Can find on following link : https://forum.xda-developers.com/one-power/how-to/official-twrp-motorola-one-power-t3848354
NOTE:- Decryption support available now for TWRP in Fastboot mode only (TWRP installer currently not support for decryption)
Credit & Thanks
@erfanoabdi for bringing officeal TWRP for MOTO one Power
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Warning:-
I am not responsible for bricked devices.
Your warranty will void now. Do it at your own Risk.
Requirement:-
1. Unlock Bootloader Link By @rushiranpise :- https://forum.xda-developers.com/one-power/how-to/guide-motorola-one-power-unlock-relock-t3858797
2. Minimal adb & fastboot install on pc :- https://forum.xda-developers.com/showthread.php?t=2317790
Note: - As google introduce the partation AB for android one devices so there is no recovery partation sepereatly .
We need to patch recovery into Boot.img.
Guide:-
1. Download Twrp recovery.img & TWRP Installer. keep TWRP_recovery.img in adb folder and copy twrp insatller to sd card of phone
2. go to settings/about phone/build number (tap build no for 7 time now developer option available in settings)
3. go to developer option turn on usb debugging .
4. then go to pc download and extract and copy adb fastboot driver folder in Drive C. (or install form net.)
5. Go in fastboot folder which is copied to C. press and hold shift key on your key board and click right key on your mouse . it will show option open cmd here or open power shell window here.
6. Click it, A cmd window will open. or you can open CMD in pc as admin and use cd cmd to adb minimul folder.
type "adb devices" - it show some no of your device in cmd window on pc if not just revoke adb from your phone developer setting and give permission from your phone screen)
type "adb reboot bootloader" your phone reboot in bootloader mode.
Now Type in CMD :-1. fastboot devices (a device no. will show in cmd window on pc) if not means fastboot not installed properly reinstall it.
2. fastboot boot TWRP_recovery.img (phone will boot in twrp temporary)
(Now if you want to read your internal storage in twrp then you need to wipe by select format data option at bottem right of twrp. Beware it will erase all data from your phone ) if you not want then skip this
3. select install option and select sd card from select storage option from twrp.
4. select twrp installer which you copied into sd card and install.
Done TWRP now installed into boot. reboot to recovery and then reboot to system.
Note:- you need to flash this installer after every rom flashing or boot flashing to patch boot again because now twrp is inside the boot itself
New Link TWRP3.3.1 (update)- https://drive.google.com/open?id=1iRpOyUA-FleNwiWO7Rmu5kEeWjgmDBox (decryption support)
Link TWRP3.3.0 (update)- https://drive.google.com/open?id=1k5nZ3AfAd8GEkbPN3ntPj7c922VbqqfZ (decryption support)
As in TWRP 3.3.0 there is no need of twrp installer zip, in advance function of twrp there is option to install ramdisk into boot. this option is available but not working for us . it is installing but stuck on teamwin logo so use only as boot in twrp don't install it.
OLD LINKS : TWRP Installer :-https://drive.google.com/open?id=1mTlm2DRrIfOTeSpB4YnVLKCVcKtPjgF7
TWRP recovery :-https://drive.google.com/open?id=1xzg-TpDOska_w9aExyKVflKBCA8TRD6O
TWRP Decryption Supported Recovery:- https://drive.google.com/open?id=1iYOk0OdddPuylfl0TRI73d9zSYigllwV
How to Take Nandroid Backup and Restore (Only for Decryption support twrp)
1. boot into twrp via fastboot and enter your pin or password to decrypt.
2. Most important - go to backup and unselect oem and system and vendor. (there are two system and vendor unselect one and only select system image and vendor image to take backup)
3. now select storage where to take backup either internal or external or usb otg.
4. take backup.
5. For restore select restore and do.
6. step 2 is most improtant never use these partition to take backup or restore.
Note:- if after restore phone not boot properly or any issue don't panic restore stock rom(which backup you have) & boot and do process again to resotre. always better to restore only boot, system image and vendor image and data only.
Version-4
added all official support in this
Removed MTP & fix bugs for wiping partition
Removed Toybox & included busybox
advance versoin then official TWRP(Compiled with PIE source)
Decryption Working now (Not in installer)
thx.
I get this error, someone knows how to solve it ?
colorist said:
thx.
Click to expand...
Click to collapse
HTML:
PS C:\Program Files (x86)\Minimal ADB and Fastboot> .\fastboot boot TWRP_recovery.img
downloading 'boot.img'...
OKAY [ 0.615s]
booting...
FAILED (remote failure)
finished. total time: 1.522s
I have my bootloader unlocked , and I'm trying to install TWRP in my moto one
I get this error, someone knows how to solve it ?
angelogiuseppe said:
HTML:
PS C:\Program Files (x86)\Minimal ADB and Fastboot> .\fastboot boot TWRP_recovery.img
downloading 'boot.img'...
OKAY [ 0.615s]
booting...
FAILED (remote failure)
finished. total time: 1.522s
I have my bootloader unlocked , and I'm trying to install TWRP in my moto one
I get this error, someone knows how to solve it ?
Click to expand...
Click to collapse
same here, any help ???
Amaterasus said:
same here, any help ???
Click to expand...
Click to collapse
try transferring the .img file to sd card first and then try the same command
maybe it will help
you can try these methods too:
i) check if the bootloader is getting lock again
ii) you've turned on oem unlocking in develeper options
iii) check the partiton isn't corrupted
and if these does not help you try factory resetting your device.
good luck
we have to flash installer after boot into recovery?
ZeroVirus said:
we have to flash installer after boot into recovery?
Click to expand...
Click to collapse
yes bro
and you'll have to flash it everytime you install a custom rom
---------- Post added at 05:27 PM ---------- Previous post was at 05:24 PM ----------
Amaterasus said:
same here, any help ???
Click to expand...
Click to collapse
if you are still getting this error
I find a way to get through it
just enter the command and press enter without connecting your phone
it will show that its waiting for device
then get into the bootloader by holding down power and volume down button
then connect the phone to pc
it should do the work
Does the latest twrp 3.3.0 works with the flash command or I can only boot it?
I am currently using the old version with the twrp installer.
Wanted to know if the latest twrp is working with flashing recovery partition.
Plz port multi rom twrp for one power
Not working
nerdfail said:
Does the latest twrp 3.3.0 works with the flash command or I can only boot it?
I am currently using the old version with the twrp installer.
Wanted to know if the latest twrp is working with flashing recovery partition.
Click to expand...
Click to collapse
Yes same question here ??
P30 Note?
Hello,
will it work with Motorola P30 Note (XT1942-1)? Basically the same phone, but without LTE B20.
TWRP not decrypt internal memory.
Hi sir.
I am using TWRP recovery 3.2.3 on my Motorola one Power.
I am facing problem internal memory are showing incrypted.
How can I fix this.?
I also used it new updates. They are not working.
When I flashed this twrp-3.3.1-1-chef.img internal file was decrypt but twrp shows devices unrooted.
Can you help me out sir.
I'm trying to install twrp latest version 3.6 plus but after boot it's not open stuck at the twrp logo after reboot
Hello, I'm kind of new at this (this is my first post) so be gentle
So, the last few days I've been trying to install a new rom on my phone (Redmi Note 4X) and the problems started with the model. I only seem to find Redmi Note 4 roms, and as I've come to find, mine is supposed to be the mido one (correct me if I'm wrong though). I have unlocked the bootloader, I have installed and enabled the fastboot on my phone, so the next step was to install the latest TWRP.
There came more problems; I tried doing this through the app and it just wouln't flash it. So I found a guide on how to root my phone and install a new recovery through adb and I followed it. It didn't work. I couldn't find the right twrp version for my phone. When I finally did realise my phone needed mido, I found the latest from the TWRP website. It wouldn't load through adb again. I found a thread about a fixed mido version, which finally worked for me. But my brother who was helping me, and isn't as much of a noob as I am (he has flashed rom and recoveries many times on his Nexus 5X), decided that I necessarily need the latest twrp if I'm going to flash a new rom, so he flashed the new twrp through the old one, and soft bricked my phone (I think). So I'm searching for a guide to unbrick it. (Which I can't seem to find to work at least).
To conclude;
I have unlocked my bootloader
I have access to the fastboot
I tried to flash a recovery
I failed many times, but I managed it
I flashed the latest twrp and bricked my phone
I don't have access to the recovery
My phone is still on a bootloop
I am not sure about which phone model I have
Help!
Thanks in advance.
1. Just check your phone model on its box. If its Snapdragon version (Mido), then just install it via fastboot. (code: fastboot flash recovery twrp-midoxx.img). If you are success, then try to reboot to recovery (fastboot boot twrpmido-xx.img). After booted, then you just manage to rom.zip you want to install. If you don't have it, then download it before from your PC and push it to your phone. Or just enable Mtp checklis from TWRP n copy that file to your internal phone/sdcard. Wipe all/factory reset except internal storage. Then you dan install rom.zip normally. N reboot. (Note: if you are on MIUI and wanted to always stay on it, just flash the file called lazyflasher.zip. n' wipe cache n art cache only then reboot). Flashing custom recovery on stock MIUI Will manage the device Going to bootloop)
2. If you have mediatek version (nikel), searching the fastboot Rom from miui website and flash it normally via fastboot. (SP Flash tool)
Warning: flash the wrong rom file into wrong phone Will make your device brick. So becarefull n knowing what model/code name you have.
Dyt199412syam said:
1. Just check your phone model on its box. If its Snapdragon version (Mido), then just install it via fastboot. (code: fastboot flash recovery twrp-midoxx.img). If you are success, then try to reboot to recovery (fastboot boot twrpmido-xx.img). After booted, then you just manage to rom.zip you want to install. If you don't have it, then download it before from your PC and push it to your phone. Or just enable Mtp checklis from TWRP n copy that file to your internal phone/sdcard. Wipe all/factory reset except internal storage. Then you dan install rom.zip normally. N reboot. (Note: if you are on MIUI and wanted to always stay on it, just flash the file called lazyflasher.zip. n' wipe cache n art cache only then reboot). Flashing custom recovery on stock MIUI Will manage the device Going to bootloop)
2. If you have mediatek version (nikel), searching the fastboot Rom from miui website and flash it normally via fastboot. (SP Flash tool)
Warning: flash the wrong rom file into wrong phone Will make your device brick. So becarefull n knowing what model/code name you have.
Click to expand...
Click to collapse
Hello and thanks for the reply. I have the snapdragon version, but all I'm asking is how am I supposed to flash the lazyflasher without accessing the recovery? Through adb?
fionik said:
Hello and thanks for the reply. I have the snapdragon version, but all I'm asking is how am I supposed to flash the lazyflasher without accessing the recovery? Through adb?
Click to expand...
Click to collapse
Firstly, enter fastboot mode on your device. Connecting to pc and flashing the twrp for mido. "fastboot flash recovery twrp-mido.img". Then boot to it using " fastboot boot twrp-mido.img". Then you will enter the recovery (twrp) in a second. Copy the lazyflasher into your phone (enable mtp first in Mount option in twrp) that you downloaded from pc. Just flash the lazyflasher.zip and reboot.
And why you don't want to flash lazyflasher when it very easy to flash it using recovery twrp? adb? You mean android debugging? Actually, you cant flash a .zip file into your system partition except through fastboot mode. However, fastboot mode (in cmd) only recognize a .img file. I just try to tell you the easier method to make your device boot up.
Dyt199412syam said:
Firstly, enter fastboot mode on your device. Connecting to pc and flashing the twrp for mido. "fastboot flash recovery twrp-mido.img". Then boot to it using " fastboot boot twrp-mido.img". Then you will enter the recovery (twrp) in a second. Copy the lazyflasher into your phone (enable mtp first in Mount option in twrp) that you downloaded from pc. Just flash the lazyflasher.zip and reboot.
And why you don't want to flash lazyflasher when it very easy to flash it using recovery twrp? adb? You mean android debugging? Actually, you cant flash a .zip file into your system partition except through fastboot mode. However, fastboot mode (in cmd) only recognize a .img file. I just try to tell you the easier method to make your device boot up.
Click to expand...
Click to collapse
As I said above, I can only access the fastboot, and I get errors in the adb when I try to flash the twrp image.
fionik said:
As I said above, I can only access the fastboot, and I get errors in the adb when I try to flash the twrp image.
Click to expand...
Click to collapse
Share your error please.
Try fastboot boot twrp.img