Hello
Here is attached link to TWRP 2.8.7.0 for Qualcomm's version of 64bit htc_a51ul and htc_a51tuhl. Not sure if it will work with htc_a51dtul (dual sim version for India/Asia) but if someone want to test, please do.
To flash phone, use below fastboot as HTC was change version for 64bit bootloader, so if You use Linux on Your PC, get My version, put together with recovery.img in same folder, restart phone into bootloader and execute:
Code:
chmod 755 fastboot
Code:
./fastboot flash recovery recovery.img
NOTE that dot and slash are IMPORTANT. If You skip it, will not use My fastboot but other which probably not work and You will get error flashing.
If You are on windows, please use latest version of fastboot for windows.
As usual, TRWP sources are on Omnirom github, device sources are on My github.
NOTE THAT YOU NEED TO HAVE 64bit BOOTLOADER (Lollipop installed on device)
Happy rooting
CAUTION: I am not responsible if You delete and/or brick Your device!!!
DOWNLOAD
EDIT1: attach removed due to bug inside. Will attach new one asap fix bug and recompile.
EDIT2: attach attached back
RESERVED
Screenshoots
Thank you fergy!
I will test a51_dtul!
Working
HTC Desire 820 cihazımdan Tapatalk kullanılarak gönderildi
Works great. Thank You!
Now i can backup to ext. sdcard and restore from ext. sdcard. Big evolution.
@fergy:
Great work.
No adb. Is it disabled in the build?
tomal said:
@fergy:
Great work.
No adb. Is it disabled in the build?
Click to expand...
Click to collapse
No adb? Hmm... Wasnt disable it...try to unpack and check please as i am not home atm.
Htc_a51dtul test is normal, but still the same problem, choose to "reboot to recovery" will be Repeated restart to recovery!
kinghunki said:
Htc_a51dtul test is normal, but still the same problem, choose to "reboot to recovery" will be Repeated restart to recovery!
Click to expand...
Click to collapse
I prefer to disable "reboot to recovery" (until there is a fix). It will save many user.
tomal said:
I prefer to disable "reboot to recovery" (until there is a fix). It will save many user.
Click to expand...
Click to collapse
Yes That's what I think!
I think the cause of the problem may be HBOOT!
@fergy,I added the Chinese language
Hi, where I can find 64bit sources?
@kinghunki Can you provide me original english xml? I want to translate it into polish
en.xml
Skorupa123 said:
Hi, where I can find 64bit sources?
@kinghunki Can you provide me original english xml? I want to translate it into polish
Click to expand...
Click to collapse
Here are en.xml
Skorupa123 said:
Hi, where I can find 64bit sources?
@kinghunki Can you provide me original english xml? I want to translate it into polish
Click to expand...
Click to collapse
No 64bit sources. HTC push OTA's but not release sources on htcdev.com, what is very unusual as GPL say that they MUST to release sources. Nevermind, We can handle that part soon with reverse engineering.
Only what is, let say, close to a51 Qualcomm hardware is sources for Desire 826 (a52) but with lots of changes and patches.
Thank You, tested on A51_UL EU. Works great!
kinghunki said:
Htc_a51dtul test is normal, but still the same problem, choose to "reboot to recovery" will be Repeated restart to recovery!
Click to expand...
Click to collapse
Ya, thank You for that, but I think that here is not problem with device but with twrp.
I can fix that problem but I am not maintainer of omnirom, so not My or Your problem.
If anyone have a time and wish, can participate in omnirom gerrit
Qoneek said:
Thank You, tested on A51_UL EU. Works great!
Click to expand...
Click to collapse
can you please tell if it solves the recovery problem as mentioned here? this problem is driving me crazy...
erany1 said:
can you please tell if it solves the recovery problem as mentioned here? this problem is driving me crazy...
Click to expand...
Click to collapse
What problem You have with recovery? This replace original HTC recovery and You can root, change OS etc..
fergy said:
Hello
Here is attached link to TWRP 2.8.7.0 for Qualcomm's version of 64bit htc_a51ul and htc_a51tuhl. Not sure if it will work with htc_a51dtul (dual sim version for India/Asia) but if someone want to test, please do.
To flash phone, use below fastboot as HTC was change version for 64bit bootloader, so if You use Linux on Your PC, get My version, put together with recovery.img in same folder, restart phone into bootloader and execute:
Code:
chmod 755 fastboot
Code:
./fastboot flash recovery recovery.img
NOTE that dot and slash are IMPORTANT. If You skip it, will not use My fastboot but other which probably not work and You will get error flashing.
If You are on windows, please use latest version of fastboot for windows.
As usual, TRWP sources are on Omnirom github, device sources are on My github.
NOTE THAT YOU NEED TO HAVE 64bit BOOTLOADER (Lollipop installed on device)
Happy rooting
CAUTION: I am not responsible if You delete and/or brick Your device!!!
DOWNLOAD
EDIT1: attach removed due to bug inside. Will attach new one asap fix bug and recompile.
EDIT2: attach attached back
Click to expand...
Click to collapse
Hello.
I tried once to change my stock recovery img but I ended up with a non compatible one and it has been impossible to find a good one.
I can only use my PC and ADB to flash one.
I'm using windows 10 and this model htc_a51tuhl. I have ADB and everything installed.
When i try to flash the recovery you posted: CMD "fastboot flash recovery recovery.img", it says "invalid sparse file format". I assume that the file is too big, but why?
Isn't it supposed to work? or it's only for linux users? Can someone inlight me please.
I'm struggling to find a working recovery to root my phone and so if someone share a working one for me, that would be very very nice.
Related
Hi everybody!
On our 4pda.ru forum we are struggling with this phone in two ways- rootin it and unlocking in order to update manually to 2.0 and even 2.2; and other way- working android (already have beta rom which is exact copy of rom from another alcatel 6014x which runs android and similar to our Fire E 6015x).
if there are any enthusiasts about android, i can translate the guide for you and share the needed files and programs. Almost everything works except sim-card(when there is no one- phone asks to insert it, when there is one- phone says its not registered) but we are working on it
i came over a https://www.soeren-hentzschel.at/mo...ch-verteilt-firefox-os-2-0-und-firefox-hello/ that states that in Germany some people already received 2.0 update on their Fire E. Here arises my question- are here people who own updated Fire E? I mean update to 2.0.
If there are ones, would you be so kind to make a copy of your rom for our little development? I can provide you with guides and software on how to do it.
I can post guides for making this an android phone.
Hi my dear russian brother - greetings from Germany.
I do have an updated 6015x device to FFOS2.0 and I could dump the rom for U. Just gimme links to the needed info. My russian is not one of my strength, but I think I can manage it - I'm a bulgarian after all.
hej, i also have a 6015X (fire e) with firefox os 2.0 running
tell me how to make a rom which i can send to you
root
After few months of waiting my phone get the forefoxos2.0 update
01008d yes it is fine but how to root it?
cybervitexud said:
After few months of waiting my phone get the forefoxos2.0 update
01008d yes it is fine but how to root it?
Click to expand...
Click to collapse
Look, please, do you have in System settings parameters of russian language on your FFOS 2.0.
HOWTO ROOT ALCATEL OT 6015X:
1. Download CWM recovery image made for 6014x.
https:// yadi.sk/d/BIdXndcbfR2Gm
2. Download Install-SuperSU.
download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
3. Turn your phone to bootloader mode anyway.
4. Run modrecovery:
Code:
fastboot boot my_recovery.img
5. In CWM menu follow "install zip" -> "install zip from sideload"
6. On pc:
Code:
adb sideload UPDATE-SuperSU-v2.46.zip
7. reboot phone
I am sure lowlevel utilities from android's SuperSU are working fine on any FFOS (because FFOS based on Android now).
WBR
Alcatel's stock ROM for the Fire E has been published at sourceforge.net in the Alcatel project.
dermartinac said:
Alcatel's stock ROM for the Fire E has been published at sourceforge.net in the Alcatel project.
Click to expand...
Click to collapse
I wonder how do you use it though, can you build it on its own? The B2G by Mozilla still hasn't got an option for this device.
Svinka said:
Look, please, do you have in System settings parameters of russian language on your FFOS 2.0.
HOWTO ROOT ALCATEL OT 6015X:
1. Download CWM recovery image made for 6014x.
https:// yadi.sk/d/BIdXndcbfR2Gm
2. Download Install-SuperSU.
download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
3. Turn your phone to bootloader mode anyway.
4. Run modrecovery:
Code:
fastboot boot my_recovery.img
5. In CWM menu follow "install zip" -> "install zip from sideload"
6. On pc:
Code:
adb sideload UPDATE-SuperSU-v2.46.zip
7. reboot phone
I am sure lowlevel utilities from android's SuperSU are working fine on any FFOS (because FFOS based on Android now).
WBR
Click to expand...
Click to collapse
I tried your recovery image but it doesn't seem to work. There is no error but after booting the image, the device isn't visible in fastboot or adb. For that reason, I'm unable to sideload the Su zip update.
sybiam said:
I tried your recovery image but it doesn't seem to work. There is no error but after booting the image, the device isn't visible in fastboot or adb. For that reason, I'm unable to sideload the Su zip update.
Click to expand...
Click to collapse
Flashing the recovery image works though, then sideloading the SU image works from clock work mode recovery.
Ok, here's some news. I built a boot image that enables adb as root. All you need is to flash it on the boot partition and reboot the phone. I made a few changes to the boot image.
default.prop
Code:
ro.secure = 0
ro.debuggable = 1
To flash:
Code:
fastboot flash boot boot3.img
and replaced /sbin/adbd by an adbd built with "ALLOW_ADBD_ROOT". (I used the sources fetched using b2g repo).
Cool thing..wish I am able
Sent from my SM-G7102 using XDA Free mobile app
Hi. Update firefox os 3.0?
lirondeespaña said:
Hi. Update firefox os 3.0?
Click to expand...
Click to collapse
As far as i know even Firefox OS 2.2 is not officially released yet.
There are only pre Versions.
Has anybody else troubles with FFOS 2.0 on the Alcatel Fire E?
The phone sometimes hangs completely while it was sleeping. (Can´t wake up or even call the phone)
Only if i press the start button for some seconds the phone starts again.
I hope someone builds a FFOS 2.2 Rom for the Fire E --> Copy and paste :good:
How can I switch this piece of **** called smartphone to bootloader mode?
Softbricked 6015x
Hey guys,
I got stuck with creating the boot.img and figured out that the backed up one doesn't work.
Does anybody have a working boot.img for the 6015x, NOT the 6014x?
I tried also getting the venezuelian one, but those TLDs are not reachable anymore - all gone.
The custom boot images from the russian 4pda forum are also not working.
I currently have only access to ADB, the TWRP recovery mod (temporarily) and fastboot, so I need a fastboot working image.
The Mobile Upgrade Q / TCL Updater / QDST distribution updater is Windows only - and crawling the binaries for URLs is a dead-end. The tool also requires
a fully booted OS, so it's pretty much the dumbest update tool out there and not practical to use. As I don't have Windows, the imgc files for the eMMC flashing tool are also a dead-end.
I really need only the boot.img file.
I really need only the boot.img file.
Click to expand...
Click to collapse
Did you try my boot img?
sybiam said:
Did you try my boot img?
Click to expand...
Click to collapse
Yes, my device constantly reboots and fails to initialize the display (seems like an Xorg alike error to me) when trying to figure out what logcat shows.
Due to the constant reboots I can't debug it using adb, because of constantly lost connections. That's why I'm asking for an OEM boot.img file.
I started to collect the working stuff over at github.com/martensms/alcatel-6015x (cant post links -_-)
cmartensms said:
Yes, my device constantly reboots and fails to initialize the display (seems like an Xorg alike error to me) when trying to figure out what logcat shows.
Due to the constant reboots I can't debug it using adb, because of constantly lost connections. That's why I'm asking for an OEM boot.img file.
I started to collect the working stuff over at github.com/martensms/alcatel-6015x (cant post links -_-)
Click to expand...
Click to collapse
Did you try to boot with fastboot or did you flash it to the boot partition. I had no success booting with fastboot but flashing works. That said, you have to install a custom recovery image.
Also, I'm working on building FFOS from sources but as won't be home for a month, it's kind of slow.
sybiam said:
Did you try to boot with fastboot or did you flash it to the boot partition. I had no success booting with fastboot but flashing works. That said, you have to install a custom recovery image.
Also, I'm working on building FFOS from sources but as won't be home for a month, it's kind of slow.
Click to expand...
Click to collapse
Both. Didn't work. As I said, I have no functioning boot image available. All boot images, from everywhere including your one, don't work.
I don't know what's so hard to understand. NO custom boot.img works. Seriously. None. Simple as that. I tried 9 different boot.img out, I even tried extracting the eMMC boot.img which obviously failed.
Again, third time, I just need an OEM boot.img in order to get further debugging my device because I can't debug my device in 3 second disconnect intervals from ADB.
edit: I unbricked my device now and made backup images of all OEM partitions - github.com/martensms/alcatel-6015x
cmartensms said:
Both. Didn't work. As I said, I have no functioning boot image available. All boot images, from everywhere including your one, don't work.
I don't know what's so hard to understand. NO custom boot.img works. Seriously. None. Simple as that. I tried 9 different boot.img out, I even tried extracting the eMMC boot.img which obviously failed.
Again, third time, I just need an OEM boot.img in order to get further debugging my device because I can't debug my device in 3 second disconnect intervals from ADB.
edit: I unbricked my device now and made backup images of all OEM partitions - github.com/martensms/alcatel-6015x
Click to expand...
Click to collapse
That's weird, my custom boot works on my own phone. 6015x, it's a russian phone. Firmware revision: 01005, hardware revision 01, platform version: 28. Firefox OS 1.3.0.0 .
I guess, if you had a newer version of Firefox, there could be something wrong with the boot image.
can anyone help me how to root my nubia z11 mini s NX549J ? and how to flash twrp in nubia ? and also i want to update to latest andoid version ? please give links to download if needed in this procedure.
ravisoni999 said:
can anyone help me how to root my nubia z11 mini s NX549J ? and how to flash twrp in nubia ? and also i want to update to latest andoid version ? please give links to download if needed in this procedure.
Click to expand...
Click to collapse
Look here:
https://cloud.mail.ru/public/9346/QZnnNkU2f
There is a link for TWRP and SuperSU inside, TWRP can be flashed using adb, i won't explain how to flash it with adb because there is plenty of guides that can help you (use google to search "how to flash TWRP with ADB ).
in TWRP flash SuperSU to have root.
For Custom ROMs and to upgrade to latest Android version:
Inside the link i gave you, there is a folder named CM, inside it, there is a file with the name (lineage-14.1-20170310 UNOFFICIAL-nx549j.zip) that is the latest LineageOS 14.1 rom with android 7.1.1, you can flash it in recovery with a compatible gapps of course.
The link i gave you has many other useful stuff, you can check it out.
And take a look at this thread, i found the links inside it and you may find more things there:
https://forum.xda-developers.com/general/rooting-roms/root-nubia-z11-mini-s-nx549j-t3506407/
If i helped you, please press "thanks" button
MigoMujahid said:
Look here:
https://cloud.mail.ru/public/9346/QZnnNkU2f
There is a link for TWRP and SuperSU inside, TWRP can be flashed using adb, i won't explain how to flash it with adb because there is plenty of guides that can help you (use google to search "how to flash TWRP with ADB ).
in TWRP flash SuperSU to have root.
For Custom ROMs and to upgrade to latest Android version:
Inside the link i gave you, there is a folder named CM, inside it, there is a file with the name (lineage-14.1-20170310 UNOFFICIAL-nx549j.zip) that is the latest LineageOS 14.1 rom with android 7.1.1, you can flash it in recovery with a compatible gapps of course.
The link i gave you has many other useful stuff, you can check it out.
And take a look at this thread, i found the links inside it and you may find more things there:
https://forum.xda-developers.com/general/rooting-roms/root-nubia-z11-mini-s-nx549j-t3506407/
If i helped you, please press "thanks" button
Click to expand...
Click to collapse
link you have given is redirect to me site having language other than english that i don't know so its not working for me please give any google link .
ravisoni999 said:
link you have given is redirect to me site having language other than english that i don't know so its not working for me please give any google link .
Click to expand...
Click to collapse
you can simply use google translate to translate a full page, and the files have English names, what file can't you download?
It's just a one click download, you choose the file and you press the big blue button that has a white arrow looking down
MigoMujahid said:
Look here:
https://cloud.mail.ru/public/9346/QZnnNkU2f
There is a link for TWRP and SuperSU inside, TWRP can be flashed using adb, i won't explain how to flash it with adb because there is plenty of guides that can help you (use google to search "how to flash TWRP with ADB ).
in TWRP flash SuperSU to have root.
For Custom ROMs and to upgrade to latest Android version:
Inside the link i gave you, there is a folder named CM, inside it, there is a file with the name (lineage-14.1-20170310 UNOFFICIAL-nx549j.zip) that is the latest LineageOS 14.1 rom with android 7.1.1, you can flash it in recovery with a compatible gapps of course.
The link i gave you has many other useful stuff, you can check it out.
And take a look at this thread, i found the links inside it and you may find more things there:
https://forum.xda-developers.com/general/rooting-roms/root-nubia-z11-mini-s-nx549j-t3506407/
If i helped you, please press "thanks" button
Click to expand...
Click to collapse
hi friend thanks for quick reply but i wanted to know is twrp , super su and lineage-14.1-20170310 will compatible to my nubia z11 mini s . are you sure it will not brick my phone as i follow your steps properly.:good::good:
ravisoni999 said:
hi friend thanks for quick reply but i wanted to know is twrp , super su and lineage-14.1-20170310 will compatible to my nubia z11 mini s . are you sure it will not brick my phone as i follow your steps properly.:good::good:
Click to expand...
Click to collapse
Yes I'm pretty sure because they're all for the same model number as yours and the title of that russian page and the files names' are all with the same model number which is NX549J.
And for more sure, the xda thread i linked in my first post is talking about your phone and it's where i got the links, Don't Worry
MigoMujahid said:
you can simply use google translate to translate a full page, and the files have English names, what file can't you download?
It's just a one click download, you choose the file and you press the big blue button that has a white arrow looking down
Click to expand...
Click to collapse
please reply my previous thread
ravisoni999 said:
please reply my previous thread
Click to expand...
Click to collapse
I already replied to you here:
https://forum.xda-developers.com/an...ash-twrp-update-android-t3580990/post71640400
MigoMujahid said:
Yes I'm pretty sure because they're all for the same model number as yours and the title of that russian page and the files names' are all with the same model number which is NX549J.
And for more sure, the xda thread i linked in my first post is talking about your phone and it's where i got the links, Don't Worry
Click to expand...
Click to collapse
well i have indian english version nubia with play store already installed. i am using twrp.zip file but there are also other two file twrp name .img what it is for? i found lot important files in your link can you give me quick review how and which file will i use to customize my phone without any bugs .
MigoMujahid said:
I already replied to you here:
https://forum.xda-developers.com/an...ash-twrp-update-android-t3580990/post71640400
Click to expand...
Click to collapse
please reply to my previous thread
ravisoni999 said:
well i have indian english version nubia with play store already installed. i am using twrp.zip file but there are also other two file twrp name .img what it is for? i found lot important files in your link can you give me quick review how and which file will i use to customize my phone without any bugs .
Click to expand...
Click to collapse
Use this TWRP:
https://cloud.mail.ru/public/9346/QZnnNkU2f/twrp_3.0.2-0_NX549J_20161125.img
When you flash TWRP, make a factory wipe (system, data, cache, dalvik cache) and install this LineageOS 14.1 i told you about if you want a pure rom without any customizations, and flash gapps from Opengapps.org (ARM>7.1>Pico), if you want a rom with customizations, use this Resurrection Remix Marshmallow rom and flash gapps that is (ARM>6.0>Pico).
ravisoni999 said:
please reply to my previous thread
Click to expand...
Click to collapse
i tried to flash twrp but got error while giving commmand " flashboot device " and " flash recovery twrp.img " as i do not get any response from phone and i got respone " waiting for device " . please upload indepth steps or video of twrp flashing . i already follow the steps said in xda developer forum method .
MigoMujahid said:
Use this TWRP:
https://cloud.mail.ru/public/9346/QZnnNkU2f/twrp_3.0.2-0_NX549J_20161125.img
When you flash TWRP, make a factory wipe (system, data, cache, dalvik cache) and install this LineageOS 14.1 i told you about if you want a pure rom without any customizations, and flash gapps from Opengapps.org (ARM>7.1>Pico), if you want a rom with customizations, use this Resurrection Remix Marshmallow rom and flash gapps that is (ARM>6.0>Pico).
Click to expand...
Click to collapse
]
i tried to flash twrp but got error while giving commmand " flashboot device " and " flash recovery twrp.img " as i do not get any response from phone and i got respone " waiting for device " in pc . please upload indepth steps or video of twrp flashing . i already follow the steps said in xda developer forum method
ravisoni999 said:
]
i tried to flash twrp but got error while giving commmand " flashboot device " and " flash recovery twrp.img " as i do not get any response from phone and i got respone " waiting for device " in pc . please upload indepth steps or video of twrp flashing . i already follow the steps said in xda developer forum method
Click to expand...
Click to collapse
You have to rename the TWRP to twrp.img and then enable usb debugging in your phone and connect it to pc, and proceed with the rest of the guide.
"Waiting for device" can be fixed by installing PDANet from Pdanet.co
Download it and install it then disconnect your phone and reconnect it to pc and start over.
Ps: there is no commands like the one said above, the right commands are "adb reboot bootloader" and "fastboot flash recovery twrp.img" there is a step by step guide here:
https://forum.xda-developers.com/showthread.php?p=32965365
Follow the instructions under Install Via ADB section.
These instructions are the easiest available and there is no way i can explain easier.
MigoMujahid said:
You have to rename the TWRP to twrp.img and then enable usb debugging in your phone and connect it to pc, and proceed with the rest of the guide.
"Waiting for device" can be fixed by installing PDANet from Pdanet.co
Download it and install it then disconnect your phone and reconnect it to pc and start over.
Ps: there is no commands like the one said above, the right commands are "adb reboot bootloader" and "fastboot flash recovery twrp.img" there is a step by step guide here:
https://forum.xda-developers.com/showthread.php?p=32965365
Follow the instructions under Install Via ADB section.
These instructions are the easiest available and there is no way i can explain easier.
Click to expand...
Click to collapse
i downloaded pdanet and also installed but both adb and pdanet are not working at same time see the the video that i follow procedure in my pc connect with nubia https://youtu.be/imbdDXMquJk . can you send me solution of this problem . make video and send it with youtube link.
ravisoni999 said:
i downloaded pdanet and also installed but both adb and pdanet are not working at same time see the the video that i follow procedure in my pc connect with nubia
. can you send me solution of this problem . make video and send it with youtube link.
Click to expand...
Click to collapse
I can't make a video and i can't use my pc because it's my las year in high school, so it's forbidden from me.
Try asking those guys in here:
https://forum.xda-developers.com/general/rooting-roms/root-nubia-z11-mini-s-nx549j-t3506407/
They might be able to help you.
Edit: i found something in the thread
Enable usb debbuging, enter fastboot via volume - and Power....probably volume down
Type: fastboot flash recovery twrp.img in cmd window that you opened in the twrp folder.
twrp.img file needs to be in the same folder as adb
Try it and let me know
MigoMujahid said:
Look here:
https://cloud.mail.ru/public/9346/QZnnNkU2f
There is a link for TWRP and SuperSU inside, TWRP can be flashed using adb, i won't explain how to flash it with adb because there is plenty of guides that can help you (use google to search "how to flash TWRP with ADB ).
in TWRP flash SuperSU to have root.
For Custom ROMs and to upgrade to latest Android version:
Inside the link i gave you, there is a folder named CM, inside it, there is a file with the name (lineage-14.1-20170310 UNOFFICIAL-nx549j.zip) that is the latest LineageOS 14.1 rom with android 7.1.1, you can flash it in recovery with a compatible gapps of course.
The link i gave you has many other useful stuff, you can check it out.
And take a look at this thread, i found the links inside it and you may find more things there:
https://forum.xda-developers.com/general/rooting-roms/root-nubia-z11-mini-s-nx549j-t3506407/
If i helped you, please press "thanks" button
Click to expand...
Click to collapse
can u pkaese help me with volte issue, i tried mokee and rr , both dont support volte, i have 64gb indian model... can u please confirm that volte not working or its only having this issue. any way to make it work
Mohan0004 said:
can u pkaese help me with volte issue, i tried mokee and rr , both dont support volte, i have 64gb indian model... can u please confirm that volte not working or its only having this issue. any way to make it work
Click to expand...
Click to collapse
I can't help you with that sorry, I don't have the phone.
Mohan0004 said:
can u pkaese help me with volte issue, i tried mokee and rr , both dont support volte, i have 64gb indian model... can u please confirm that volte not working or its only having this issue. any way to make it work
Click to expand...
Click to collapse
How did u install TWRP? My device is not being detected under fastboot.. adb drivers are installed.. I can see my device when I give adb devices.. But I can't find my device when I type fastboot devices. I tried installing universal Google drivers.. but I got error code 10 the device can't start..
Please help
Ravis_n said:
How did u install TWRP? My device is not being detected under fastboot.. adb drivers are installed.. I can see my device when I give adb devices.. But I can't find my device when I type fastboot devices. I tried installing universal Google drivers.. but I got error code 10 the device can't start..
Please help
Click to expand...
Click to collapse
1. put device in fastboot mode but dont connect
2. open device manager in pc(assuming u have windows 10)
3.now connect device , as soon as u connect device u will see unrecognised fastboot device
4. double click it and install fastboot drivers
(u should have universal adb and fastboot installed already)
Before moving forward, you must understand that if anything happens with your device, I'm not to be blamed on, you choose to flash this
Hey guys, so a friend of mine bricked his OnePlus2 to a state that his recovery wasn't working (wiped) and also his ROM was bootlooping. So I thought of this little trick to convert the latest full OTA zip file into fastboot flashable stock ROM files by converting the system.new.dat into system sparse image. Though my friend recovered his phone by flashing recovery and sideloading zip. I still think it would be a good idea to share here
Download: OOS 3.5.8
Requirements: must have fastboot
Must have fastboot drivers
Must have knowledge on how to use these commands
Note: this is not rooted or tampered with, with this system firmware you should be able to get OTAs
Happy unbricking!
Nice, might become useful
Thanks
MZO said:
Before moving forward, you must understand that if anything happens with your device, I'm not to be blamed on, you choose to flash this
Hey guys, so a friend of mine bricked his OnePlus2 to a state that his recovery wasn't working (wiped) and also his ROM was bootlooping. So I thought of this little trick to convert the latest full OTA zip file into fastboot flashable stock ROM files by converting the system.new.dat into system sparse image. Though my friend recovered his phone by flashing recovery and sideloading zip. I still think it would be a good idea to share here
Download: OOS 3.5.8
Requirements: must have fastboot
Must have fastboot drivers
Must have knowledge on how to use these commands
Note: this is not rooted or tampered with, with this system firmware you should be able to get OTAs
Happy unbricking!
Click to expand...
Click to collapse
Got a
no file in this folder
Click to expand...
Click to collapse
when clicking the link.
casual_kikoo said:
Got a
when clicking the link.
Click to expand...
Click to collapse
Try again, the file seemed to be removed because something happened to the backend servers of AFH
Hey man. Can I still do this if my device is locked. Whenever I try to flash twrp recovery it will display unable to patch image device is locked.
Hope you can help me Bro. Thank you! ?
conqueror_25 said:
Hey man. Can I still do this if my device is locked. Whenever I try to flash twrp recovery it will display unable to patch image device is locked.
Hope you can help me Bro. Thank you! [emoji4]
Click to expand...
Click to collapse
No you can't flash images while you're locked, use fastboot oem unlock to unlock your bootloader
Thank you for your prompt response mate.
Please allow me to post my problem here with my phone.
* Hi everyone. Hope somebody can help me restore my phone again. I have successfully unlocked the bootloader of my phone but I cannot boot to Rom. Every time I power on the phone it will boot to CM stock recovery. Tried to flash TWRP recovery but unable to write image. Device is locked. Did some research and found out the reason behind this is I did not unable update to CM Recovery in Developer Options.
What is the best way to resolve this issue? I still have access to Fastboot and can do ADB commands but device is locked.
Will sideloading a stock CM OP2 Rom will fix the issue? I'm also concerned with the draining of the battery, if I cannot turn on because no more charge already.
I'm using Mac computer but I can borrow a windows laptop to fix this.
Any help will be highly appreciated..
Thank you very much in advance guys!
God bless!
conqueror_25 said:
Thank you for your prompt response mate.
Please allow me to post my problem here with my phone.
* Hi everyone. Hope somebody can help me restore my phone again. I have successfully unlocked the bootloader of my phone but I cannot boot to Rom. Every time I power on the phone it will boot to CM stock recovery. Tried to flash TWRP recovery but unable to write image. Device is locked. Did some research and found out the reason behind this is I did not unable update to CM Recovery in Developer Options.
What is the best way to resolve this issue? I still have access to Fastboot and can do ADB commands but device is locked.
Will sideloading a stock CM OP2 Rom will fix the issue? I'm also concerned with the draining of the battery, if I cannot turn on because no more charge already.
I'm using Mac computer but I can borrow a windows laptop to fix this.
Any help will be highly appreciated..
Thank you very much in advance guys!
God bless!
Click to expand...
Click to collapse
This is weird. You should start a new thread about ut
I already did. Thanks man. Appreciate your reply. ?
Where is the fastboot command it is not visible
niteshnandi said:
Where is the fastboot command it is not visible
Click to expand...
Click to collapse
You have to install fastboot and adb from
https://forum.xda-developers.com/showthread.php?t=2588979
[TOOL] [WINDOWS] ADB, Fastboot and Drivers -… | Android ...
Hi @MZO,
After downloading https://androidfilehost.com/?w=files&flid=169179, the file seemed corrupted, since it seems that the file could not be fully extracted.
Please kindly verify it.
Thanks.
This guide will show you how to root your Nokia 4.2. This has been tested on TA-1157 and is working fine.
**Important** - If fastboot does not recognise your device In step 5, You need to download a driver. Here is the link: Download Driver (by Beebom)
Search up how to install custom driver and install it to the “Android” device.
Requirements:
Nokia 4.2 with unlocked bootloader
USB Cable
ADB/Fastboot.
Python
Your current ROM file
Internet.
Downloads:
ADB Installer (by Snoop05 on xda) : Download
Python : Download
Payload Dumper (vm03 on github): Download ( Click on code and select "download ZIP")
Magisk APK (on your phone) : Download APK ( Scroll down and you will find the APK file)
Code:
** I have only tested this on TA-1157. Other models may not work, but technically they should work.**
** Your warranty is now Void**
Step 1
Enable USB debugging on your phone. If you do not know how to do this, Search it up. It is easy.
Once that's enabled, Connect your phone to your PC/Laptop and open the command prompt (cmd) and type adb devices. It should show your device in the list.
Step 2
Locate the Python folder. To do this, simply type "python" in the start menu and click open file location. Then, Right click on "python.exe" and open properties. Then click open file location.
Once the folder opens, make sure to not close it.
Download the payload dumper.py which I have linked in the downloads section. Extract it and place the contents of the file in the Python folder.
Step 3
Download the ROM file. If you are using lineage OS on your Nokia 4.2, Download that file. If you are using the Stock rom, Download that. It should be a .zip file.
Extract the stuff from that file and take payload.bin and move it to the python folder.
Now, Open cmd in that directory by right clicking and opening cmd. Then, Type the following commands,
Code:
python -m pip install -r requirements.txt
then type,
Code:
python payload_dumper.py payload.bin
Once it is done extracting, Open the "output" folder. There you will find the "boot.img" file
Step 4
Use your USB cable or Google drive to transfer the "boot.img" to your phone. Once you have done that, Download the Magisk APK on your phone and install the app. (APK link in downloads section)
Once you have installed Magisk, open it and click "Install". Select the file from your phone and wait a few minutes for magisk to patch the "boot.img" file.
Once Magisk is finished patching, there will be a new file which magisk has created. Transfer the patched file to your computer via the USB cable or Google drive and make sure to rename it as "magisk_patched.img"
Step 5
You are almost done! Open CMD in the folder where you saved the "magisk_patched.img" and type
Code:
adb reboot bootloader
then type
Code:
fastboot flash boot magisk_patched.img
Once done, Reboot your phone and Voila! Your phone is now rooted. Make sure to open the magisk app and check it.
If you need any help or you get any errors, post it down here below.
Also, If this helped you, consider liking the post!
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
RZavala_2003 said:
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
Click to expand...
Click to collapse
Cool!
If you have any problems, let me know.
Geoperson8 said:
Cool!
If you have any problems, let me know.
Click to expand...
Click to collapse
I'm typing this reply, in my 4.2 with LOS 20 and root with Magisk 25, this guide was too easy to understand, thanks a lot!
RZavala_2003 said:
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
Click to expand...
Click to collapse
Bro i would be very thankful if you told me how you installed lineage os 20 i have the stock ROM rooted
Love from India
thecubernoober said:
Bro i would be very thankful if you told me how you installed lineage os 20 i have the stock ROM rooted
Love from India
Click to expand...
Click to collapse
I could help you with that
Geoperson8 said:
I could help you with that
Click to expand...
Click to collapse
Yes please i would be very thankful
Geoperson8 said:
I could help you with that
Click to expand...
Click to collapse
Please tell me how to install lineage os 20 in Nokia 4.2
King root not work connection problem
___za_x4_pan___ said:
King root not work connection problem
Click to expand...
Click to collapse
Personally, I do not recommend Kingroot as it is not very reliable and safe. Instead, you can follow this guide or follow other guides on youtube.
hello @Geoperson8 I have currently installed lineage os 20 on my nokia 4.2
But i am facing an issue with rooting my phone when I flash the patched boot.img it asks me for factory reset after factory reset one important part of flashing lineage os is flashing the vendor image but when I flash teh vendor image after flashing magisk my wifi does not work and that's what happens when you don't flash the vendor image but my wifi does not work even after flashing teh vendor image so please help me with rooting my nokia 4.2
RZavala_2003 said:
I'm typing this reply, in my 4.2 with LOS 20 and root with Magisk 25, this guide was too easy to understand, thanks a lot!
Click to expand...
Click to collapse
did you have to format you os
thecubernoober said:
did you have to format you os
Click to expand...
Click to collapse
No bro, i only read this guide and i rooted successfully!
thecubernoober said:
hello @Geoperson8 I have currently installed lineage os 20 on my nokia 4.2
But i am facing an issue with rooting my phone when I flash the patched boot.img it asks me for factory reset after factory reset one important part of flashing lineage os is flashing the vendor image but when I flash teh vendor image after flashing magisk my wifi does not work and that's what happens when you don't flash the vendor image but my wifi does not work even after flashing teh vendor image so please help me with rooting my nokia 4.2
Click to expand...
Click to collapse
I would recommed to flash the vendor image before doing any modifications on your phone. Hope this helps.
RZavala_2003 said:
I will try this in my Nokia 4.2 (TA-1149) I have unlocked bootloader and I have LineageOS 20
Click to expand...
Click to collapse
Can you tell me where did you find the vendor for that model? I have the same
imthetoadXD said:
Can you tell me where did you find the vendor for that model? I have the same
Click to expand...
Click to collapse
I can reply to that
So I found the firmware from the lineage os page section where it says switch back to stock and there is the firmware given for Android 11
Nokia 4.2 ROMs, Kernels, Recoveries, & Other Devel
Improve your Nokia 4.2's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
Refer this page for the link of stock firmware
Just so you guys know, If you need any help. Feel free to ask me.
thecubernoober said:
I can reply to that
So I found the firmware from the lineage os page section where it says switch back to stock and there is the firmware given for Android 11
Nokia 4.2 ROMs, Kernels, Recoveries, & Other Devel
Improve your Nokia 4.2's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
Refer this page for the link of stock firmware
Click to expand...
Click to collapse
Is your lineage OS and root working fine?
TWRP FOR THE A52 5G! (With issues)
Help needed!
Are you someone that has ported TWRP before without any issues?
Or are you someone that knows how to fix any problem that has been listed in the 'Additional Notes' section?
PM me. We can work together to fix the issue(s)
Note
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about doing this to your device
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Additional Notes
Code:
THIS RECOVERY IS NOT FULLY TESTED!
There are atleast these issues:
1. MTP Does NOT work. (Not with computer or with OTG)
2. NO access to your SD cards
3. Incorrect resolution (TWRP is 1080x1920, phone is 1080x2400)
4. Temperature sensor doesn't work.
THERE MIGHT BE MORE ISSUES I DO NOT KNOW OF! FLASH AT YOUR OWN RISK.
How to install?
First of all you need an unlocked BL. This is extremely easy to do and there are a lot of guide online.
Download recovery.tar (TWRP) from this post.
Select the AP slot in Odin
Disable auto reboot in Odin
Flash
Credits
TeamWin Recovery Project
Source code:
Minimal TWRP AOSP: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_aosp
Device Tree for the a52 5g: Can't upload because of 25mb+ kernel file. Will make a custom kernel soon
Thank you so much for your work on TWRP. Waited for it a year
GiulianoB said:
Thank you so much for your work on TWRP. Waited for it a year
Click to expand...
Click to collapse
No problem.
Hi,
Firstly, thanks for doing this!
Secondly, I've been trying to flash a zip (BluetoothLibraryPatcher) but I cannot find a way to get TWRP to read a zip file. Things I've tried:
From the device itself: The data partition is encrypted. twrp decrypt (in the TWRP terminal) says "No crypto support was compiled into this build".
From ADB Sideload: It gets stuck on "Starting ADB sideload feature..." for 5 minutes, then fails.
From MTP/USB OTG: As you say in your post, neither MTP from PC nor from a USB flash drive works.
Would you have any idea of how I can get TWRP to read a zip file to install?
Thanks!
ByteSizedBit said:
Hi,
Firstly, thanks for doing this!
Secondly, I've been trying to flash a zip (BluetoothLibraryPatcher) but I cannot find a way to get TWRP to read a zip file. Things I've tried:
From the device itself: The data partition is encrypted. twrp decrypt (in the TWRP terminal) says "No crypto support was compiled into this build".
From ADB Sideload: It gets stuck on "Starting ADB sideload feature..." for 5 minutes, then fails.
From MTP/USB OTG: As you say in your post, neither MTP from PC nor from a USB flash drive works.
Would you have any idea of how I can get TWRP to read a zip file to install?
Thanks!
Click to expand...
Click to collapse
Hey, you can use commands by just being on the home screen of TWRP. ADB push <file location and name> /sdcard
ByteSizedBit said:
Hi,
Firstly, thanks for doing this!
Secondly, I've been trying to flash a zip (BluetoothLibraryPatcher) but I cannot find a way to get TWRP to read a zip file. Things I've tried:
From the device itself: The data partition is encrypted. twrp decrypt (in the TWRP terminal) says "No crypto support was compiled into this build".
From ADB Sideload: It gets stuck on "Starting ADB sideload feature..." for 5 minutes, then fails.
From MTP/USB OTG: As you say in your post, neither MTP from PC nor from a USB flash drive works.
Would you have any idea of how I can get TWRP to read a zip file to install?
Thanks!
Click to expand...
Click to collapse
Btw, afaik the encryption problem isn't something I can remove.
This is fantastic to see! Nice work.
Have you tried any custom ROMs with this? Do any of the current custom ROMs (like Lineage OS) support A52 5G, or are we still a far way away from that?
biscuitpants said:
This is fantastic to see! Nice work.
Have you tried any custom ROMs with this? Do any of the current custom ROMs (like Lineage OS) support A52 5G, or are we still a far way away from that?
Click to expand...
Click to collapse
Hey. I've not started a custom ROM yet. I've been busy with school mostly. I will probably start developing Lineage OS as the first custom rom.
Things405 said:
Hey. I've not started a custom ROM yet. I've been busy with school mostly. I will probably start developing Lineage OS as the first custom rom.
Click to expand...
Click to collapse
Good luck and thanks again for your effort
Hey! I found this on GitHub and I was wondering if it's you. Your post is still saying "Will upload in a minute". Thanks!
MeowNyaaa said:
Hey! I found this on GitHub and I was wondering if it's you. Your post is still saying "Will upload in a minute". Thanks!
Click to expand...
Click to collapse
Yep thats me. I can't upload a kernel file on github as its 25mb+ So the device tree won't be complete without it. I'll change the post.
Things405 said:
Yep thats me. I can't upload a kernel file on github as its 25mb+ So the device tree won't be complete without it. I'll change the post.
Click to expand...
Click to collapse
I recommend using Git LFS for that, more info about it here: https://git-lfs.github.com/
I created a device tree myself long time ago as well, was just missing the kernel
I may sell my U1 for the Dual Sim model so I can root. I need parts of this lol
Any progress?
I just can't wait for LineageOS
@Things405 I have GitHub pro if you want someone to host the device tree on there... I'm on https://github.com/SImPilotAdamT/
Also by A52 5G do you mean the A526B?
Also for some reason I can't unlock the bootloader in my device... I have the A526B international model. https://forum.xda-developers.com/t/unable-to-unlock-the-bootloader-a52-5g-sm-a526b.4476861/
TWRP 3.7.0 is out with the support for decryption on Android 12 to be able to backup firmware. Pls update, thx
I'm sorry to have left you guys hanging! I've been too busy with personal stuff but I will get back on this as soon as possible.
flashed in A526BXXU1AUAH, when press buttons for recovery, it freeze on boot logo
does this also work for the a52s 5g version?
LuzzyKins said:
does this also work for the a52s 5g version?
Click to expand...
Click to collapse
No, the version you should be looking at is: https://forum.xda-developers.com/t/recovery-official-twrp-3-7-0-2-for-galaxy-a52s-5g.4488419/