I'm getting closer to biting the bullet on getting a Z5C, but wanted some opinions from owners:
- What color? I'm considering black/gray or yellow/"coral". How does the yellow look in real life?
- Recommendations on either a case or decent glass protection for front and back? Is it even necessary?
Thanks!
I went with black (had a white Z3c, wanted a change) a generic tempered glass screen protector, and Orzly FlexiSlim case. Very pleased with this case, barely noticeable and decent protection.
I had a red Z3C which I thought was pretty good looking.
Tried the coral and yellow one, but both of them look very cheap in my opinion. The coral is, to be honest, just pink so you gotta see if thats your style.
I'll highly recommend using any generic screen protector (or skin) on both sides since it will, as far as I have witnessed, reduce the possibility of a cracked screen significantly.
I bought a black one and will put a nice looking red dbrand skin on the back.
Thanks for the feedback. I was considering yellow just because it's so different and would stand out. If it looks cheap though, I think I'll pass. Once I figure out my tax refund amount, I'll pull the trigger on a new phone I think
Black one, so classic and so "James Bond"
No protectors, naked for its full beauty !
miilas said:
Black one, so classic and so "James Bond" [emoji14]
No protectors, naked for its full beauty !
Click to expand...
Click to collapse
Black is always my choice. Unfortunately this phone is gray on the back so I got a matte black Dbrand skin for the back.
scottjb said:
Black is always my choice. Unfortunately this phone is gray on the back so I got a matte black Dbrand skin for the back.
Click to expand...
Click to collapse
I have a black Z5C with no case and bought a Dbrand carbon fiber skin, but I never put it on. The phone gets so hot that I thought putting something else on it wouldn't help at all. I'm afraid it'll run even hotter.
I've got a black with a case-mate tough (the one with two layers) and Nillikin tempered glass screen protector.
I had the same combination on my Z3c and never suffered a broken screen or back so hopefully it'll be a good combo this time around too!
scottjb said:
Black is always my choice. Unfortunately this phone is gray on the back so I got a matte black Dbrand skin for the back.
Click to expand...
Click to collapse
Can we have photo of your z5 with Dbrand skin ? Pleease
For the protection I recommend you "IMAK series 2" crystal clear hard case.
-cheap.
-really slim from the sides.
-Not slippery (like phone's sides and back)
- crystal clear (its beautiful whatever is your phone color)
- adds good distance to the back camera.
I think it's better than a tempered glass because the phone is really slippery.
Sent from my E5823
miilas said:
Can we have photo of your z5 with Dbrand skin ? Pleease
Click to expand...
Click to collapse
Here you go. It's the matte black skin.
Related
Bought the fusion crystal case from Ringke:
GOOD:
- Completely transparent to show off Z5P's sexy back
- Grip is pretty solid
- Caps for both the headphone jack and the USB port provides additional protection for when you have that occasional dip in the pool.
- Looks premium; doesn't look cheap
- Has these four little bumpers at the back to prevent the case from being scratched when put on a flat surface
- Volume rocker and power rubbers can be easily pressed
- Scratch-resistant (so far)
- Comes with free screen protectors for both front and back
BAD:
- Fingerprint magnet (so you need to wash it after a hard day's use)
How is that and where did you get it from?
I have this one as well. Ordered from Amazon. Took forever to arrive, I think it is just becoming available. Very happy with it. Really zero complaints. Came with front and rear PET screen cover that work nicely to protect the back (didn't use it on the front, already had another screen protector). The insert said this was to prevent visual artifacts. It's a nice bonus.
Lad said:
How is that and where did you get it from?
Click to expand...
Click to collapse
i'm from canada so i bought it at amazon.
kcteun said:
I have this one as well. Ordered from Amazon. Took forever to arrive, I think it is just becoming available. Very happy with it. Really zero complaints. Came with front and rear PET screen cover that work nicely to protect the back (didn't use it on the front, already had another screen protector). The insert said this was to prevent visual artifacts. It's a nice bonus.
Click to expand...
Click to collapse
didn't use the screen protectors as i also already have my front screen protector and i don't want to cover the glass effect at the back. the back protector was matte so it covers the mirror back and i've always used the back as a mirror.
when i put on the back protector is clear as i can still see the mirror, after removing the top layer sticker which is part (2) my back protector goes matte. i suddenly feel so disappointed. the matte back looks nice but i still prefer the mirror back. im struggling should i remove the back protector as it is a very good quality and when i stick it on theres very little bubble and easy to take out those bubble.
Lawliet918 said:
didn't use the screen protectors as i also already have my front screen protector and i don't want to cover the glass effect at the back. the back protector was matte so it covers the mirror back and i've always used the back as a mirror.
Click to expand...
Click to collapse
Really? The back tempered glass of Rignke removes the glass effect in the back side?
U should test with another screen protector like Nillkin or Rhidon
I also have this case. My Chrome z5p looks gorgeous in this. Quality
Transparent with 1 year
Enviado de meu E6853 usando Tapatalk
Hi everyone, I am using Ringke Fusion Smoke Black for my Sony Xperia Z5 Premium. I have selected smoke black after reading some online reviews & some fitting issue, as after some time clear one gets yellowing. I am happy with smoke black.
ill be getting the smoked black one in the mail soon will report back with a small review
do this case makes the phone a lot hotter ?
otaolaurruchi said:
do this case makes the phone a lot hotter ?
Click to expand...
Click to collapse
No it does not make the phone hotter
Too thick for my taste...
Sent from my Xperia Z5 Premium!
Got a scratch 1st day... And I have a too big gap at the back around the cam so dust comes in between the case and the phone. Annoying on a black phone... Good fit besides that
Infraaa said:
Really? The back tempered glass of Rignke removes the glass effect in the back side?
U should test with another screen protector like Nillkin or Rhidon
Click to expand...
Click to collapse
No it doesn't. I am using a Ringke case with the back screen protector now and it's a perfect mirror.
It's not actually a tempered glass screen protector it's a very thin layer that (supposedly) prevents a rainbow effect occurring if you use the Ringke case - but of course it also provides some protection as well.
No idea what this person did ... maybe they somehow forgot to remove the protective packaging?
diji1 said:
No it doesn't. I am using a Ringke case with the back screen protector now and it's a perfect mirror.
It's not actually a tempered glass screen protector it's a very thin layer that (supposedly) prevents a rainbow effect occurring if you use the Ringke case - but of course it also provides some protection as well.
No idea what this person did ... maybe they somehow forgot to remove the protective packaging?
Click to expand...
Click to collapse
Got mine yesterday, smoke black, and my pone looks great. You have to use the back cover and everything will work and look as intended. Good qualiy case but a bit pricy
This is the best case for z5p. Its not over protected, but just enough. Also fits perfect.
Huge fan of Ringke Fusion cases in general, as I used them on few of my past phones. I will go as far as saying this is probably the best case of this clear/hybrid type in general, beating even the Spigen Ultra Hybrid which is quite hyped case. I find Ringe Fusion extremely precisely built, with perfect cutouts, and also the button cover sections are very easy to press, and you perfectly feel the "click" underneath. One more thing I like, is that the surface is so gentle to wipe, and not sticky at all, like some kind of oleophobic coating for plastic is there. I'm using the smoke black version on my Z5P, and I love it, along with matt protector for back side which takes away some of the mirror effect, but also reduces smudges and dust visibility.
Sent from my E6833 using Tapatalk
I am using this too, protection is superb, design details are satisfying, well considerate,
Hey guys gals im having a hard time deciding on what case to use with my limited edition blue pixel XL. I'm steering towards clear TPU or even Google's clear Snap-on.
Would you mind posting pictures of what use on yours?
Thanks!
http://forum.xda-developers.com/pix...el-xl-case-t3491845/post69410013#post69410013
Ordered a slickwraps distressed tan leather back, probably wont install it.
Bear motion gray, save it for later.
Goospery Yellow tpu, once the blue back novelty fades.
Nillkin brown and gray. This will be my main. Brown is like an already yellow clear tpu
Atleast 7 clear ultra think slim (yea right) clear tpu..
Xtemeguard full body skin, will most probably install the back, as these phones get scratched looking at them..
clockcycle said:
Xtemeguard full body skin, will most probably install the back, as these phones get scratched looking at them..
Click to expand...
Click to collapse
How do do slickwraps naked matte compare to xtremeguard back protector. Anyone has any experience?
Thanks in advance.
I've went through:
Slickwraps naked glossy
Slickwraps naked matte
Rhinoshield Bumper
Cimo Clear Case
Spigen Clear case
The slickwraps are very difficult to install, suggests using their video (which doesn't exist, by the way; they have install videos for other devices, none for the pixel) and I couldn't deal with it. Material felt pretty decent, would recommend the matte over glossy.
Cimo is good, like the large single cutout on the back for camera / sensors. Doesn't have the beveled edges of the Spigen.
Spigen is also decent, feels better in the hand than the Cimo because of the edges, but it's already yellowing around the inside edges after 2 weeks.
Rhinoshield is currently my favorite. It definitely adds a good bit of width to the phone, but at least the blue isn't hidden or dulled.
Not super pleased with the clear cases to be honest, the blue is quite dull through the clear TPU.
Have a Caseology Waterfall on order, should be here tomorrow. Considering ordering the Nillkin Clear and maybe a couple other clear <$10 cases off amazon until I find one that I don't think dulls the blue so much.
I'm using the red shield clear TPU the one that's open cut out for the sensor camera LED section it's really nice doesn't add Too Much bulk to the phone still much too thick for my liking and when it's brand new it's a little slippery
I use it til my orders get delivered
I used the Spigen Liquid Crystal for a few weeks but I could tell that it was starting to yellow. Felt great though. Using the Ringke Fusion right now (smoke borders) and that looks pretty decent and still shows off the blue back.
Caseology Waterfall came in. Definitely my favorite of the clear cases. It's quite grippy compared to the Cimo and Spigen. Cutouts are good (one long cutout by the back camera so no focus issues).
Still dulls the blue a little, but I'm resigned to the fact that all of them will do that. Probably going to stop looking for cases now.
remedy1419 said:
Caseology Waterfall came in. Definitely my favorite of the clear cases. It's quite grippy compared to the Cimo and Spigen. Cutouts are good (one long cutout by the back camera so no focus issues).
Still dulls the blue a little, but I'm resigned to the fact that all of them will do that. Probably going to stop looking for cases now.
Click to expand...
Click to collapse
Got pictures?
It's definitely hard to choose a clear case which can protect the phone while falling down to the ground.
So an issue was brought to my attention yesterday, my current clear case has two cut outs for cam and led, when using the flash taking pictures it crates a a halo glare on the photos.
I remedied this by cutting the center between the led and cam and no longer interferes.
clockcycle said:
Got pictures?
Click to expand...
Click to collapse
Sorry, got a bit busy.
Potato quality pictures, but all I have is an old S5. The corner shot with those 3 bumper edges are on every corner, not sure if it's for grip on the phone or drop protection. Cutouts are all really nice.
The buttons are really great, better than all the other cases I have. Fit right on and are very clicky. Kind of like diztronic buttons if you've ever had their TPU cases.
It's more rigid than the Spigen liquid crystal, probably more in line with the Ultra hybrid. It's bendy still, not a hard case, but stronger feeling than the liquid crystal I have. Wouldn't worry about any regular, non-extreme case drops with the case on. Feels really solid.
There is a little edge along the back where it has that little cutout curve by the rear glass and then goes down as a rectangle along the bottom and edges. It's kind of like a plastic seam. It could bug some people, but I grip my phone by the edges so never really feel it.
Bear Motion, in Gray
Generic Ultra Slim Thin Clear TPU from eBay 0.8mm thick
Slickwraps Natural Series Distressed Tan Leather
Generic Clear Hard PC SnapOn back protector
It seems that Ringke FUSION is a good option for real blue, clear back with bumper protect, isn't it
I am going to buy official SAMSUNG GALAXY S7 Clear View Case Cover, but I am struggling whether to get a silver or a black case for my black S7. It's really hard to determine from the pictures what is the difference, because they always present silver version of S7 with with silver case and black version of S7 with black case. Which one would look better on the black version?
I got the silver one on a silver S7. Looks and snaps on superb and it's not obstructive on the keyboard.
On a black S7, personally I would go for the case with a black rim. If you like the bling, go for the silver one.
In my opinion, don't ever buy this case. It did micro scratchs on the top of the screen and a few on the right edge after less than one week. The reason is that if tiny particles got trapped between the cover and the screen, then they will damage your screen. You are warned now.
syla said:
In my opinion, don't ever buy this case. It did micro scratchs on the top of the screen and a few on the right edge after less than one week. The reason is that if tiny particles got trapped between the cover and the screen, then they will damage your screen. You are warned now.
Click to expand...
Click to collapse
which case do u recommend? i ordered the spigen thin fit, hope its good (dont want a case which makes the phone too bulky)
destz0r said:
which case do u recommend? i ordered the spigen thin fit, hope its good (dont want a case which makes the phone too bulky)
Click to expand...
Click to collapse
I got the Rugged Armor from Spigen, really good material and fits really well. Also ordered a Yootech screen protector. It's not tempered glass cause it seems because of the 2.5D screen it's almost impossible to fit a tempered glass effectively on it. Gorilla Glass 4 should be resistant enough anyway...
syla said:
In my opinion, don't ever buy this case. It did micro scratchs on the top of the screen and a few on the right edge after less than one week. The reason is that if tiny particles got trapped between the cover and the screen, then they will damage your screen. You are warned now.
Click to expand...
Click to collapse
I confirm that. I bought this case for my wife in 1 week appeared several scratches at the top of the screen. I was VERY BRAVE. As Samsung makes a cover that scratches the screen of your cell phone. RIDICULOUS.
I like white black
On Jul 3rd I pre-ordered two dBrand skins for my OP5 and they arrived on Jul 6th. The two skins were the Mahogany wood (back and camera lens cover) and the Hyperblack Titanium (back with red camera lens cover and red 1+ logo). Even though I wanted to add the front Mahogany skins the fact that I've also ordered the Ozly tpsp screen protector made me realized I'd have issues whenever I needed to replace the screen cover.
Attached are pictures of both skins with accessories un-applied and the Mahogany skins applied including the camera lens cover. Notice that the two Mahogany skins have different wood patterns. Running your finger over each skin I realized that the Mahogany adds almost no additional grip to the slippery naked OP5 while the Hyperblack Titanium skin has more texture which I believed would add more grip. This is not to say that once applied the Mahogany skin did not reduce the overall slipper feel of a naked OP5, as it did. In the future I'll likely try the Hyperblack Titanium but right now I really like the Mahogany's overall look the best.
I still bought a cheap clear plastic case which is currently on a slow boat from China. I'll use it when I'm going someplace where accidents are more likely such as camping or a party. These skins are so thin that I don't anticipate putting the case on to be an issue.
This is the first time I've every bought or applied a skin as I've previously only gone with bumper cases. Over all I think the application went well but I certainly don't have the corner flaps applied as well as seen on dBrand's OP5 application video. Most definitely you need a hairdryer during application as I had a bubble under the skin and heating that section and the bubble's path to the outside saved having to peal the skin off to start again. It works much like you push bubbles out from a clear plastic screen protector. Getting the initial bottom alignment applied properly is the key to the rest of the application. Mess that up and you alignment issues multiply. Heating and stretching the skin is dangerous and only helps with the tiniest of misalignment.
The dBrands fit overall and specifically around the buttons is as perfect as a mass produced item can be. In conclusion, if you choose to use a skin you'd be hard pressed to find a brand with a more accurate fit.
P.S. For grip the Carbon Fiber would likely be your best bet but I thought it was butt ugly so went another way.
Edit: Added top, bottom, right and left side pictures.
Hyperblack comes along with the white 1+ logo? Or is it just the packaging design?
I am thinking of buying Black Dragon.
Usually, when is the Dbrand Sale? Any idea?
Thanks
observingi said:
Hyperblack comes along with the white 1+ logo? Or is it just the packaging design?
I am thinking of buying Black Dragon.
Usually, when is the Dbrand Sale? Any idea?
Thanks
Click to expand...
Click to collapse
No, what appears on the Hyperblack picture as a white 1+ logo is just the skin's backing tape. The Hyperblack I picked has a cut out of the 1+ logo then I ordered the red colored logo cut out to fill in the skin's logo cut out. On the Mahogany skin I chose not to have any 1+ logo so the skin was solid (no logo cut out at all). The Black Dragon skin was already available when I purchased my skins. I was tempted to get that instead of the Hyperblack.
I have no idea when there will be a sale. I didn't feel the price was too excessive. In fact I would have only bought the Mahogany at this time but the added $5 for shipping meant that a second skin only cost me an extra $6 and the shipping on both skins became free. That's much like how Amazon prices small items to be just under the free shipping costs to get you to buy one more item. In this case I went for it as a Hyperblack skin also tempted me.
I just got the black dragon skin with orange logo and camera cutout. I previously used the titanium and the hyperblack on my Nexus 6p and I can say that the dragon skin has a very similar texture than the hyperblack. IN terms of looks, I have to say that it looks similar to the hyperblack except for the cracked look/texture and the slight silver highlights in certain areas. All in all, I think it looks amazing on this device.
Im looking to grab one of the Mah Wood one and having it under my Orzly flexi case. It looks pretty amazing with the wood skin. Would you be able to show off the sides of the phone? I would love to see the fit on the sides
dBrand sure do make some precision skins! Let us know once you installed them!
Here is mine! Just finished. Marble with cement logo
A Guy Called Revive said:
Im looking to grab one of the Mah Wood one and having it under my Orzly flexi case. It looks pretty amazing with the wood skin. Would you be able to show off the sides of the phone? I would love to see the fit on the sides
Click to expand...
Click to collapse
I added pictures of both side and top and bottom to the original post. Don't be too harsh of my corner imperfections, I was a rookie
hmph @3DSammy don't I know you from my tab s threads?
Yep, new device new forum visits
Not Dbrand, but Gadgetshieldz. This is a carbon Flat Back.
HueleSnaiL said:
I just got the black dragon skin with orange logo and camera cutout. I previously used the titanium and the hyperblack on my Nexus 6p and I can say that the dragon skin has a very similar texture than the hyperblack. IN terms of looks, I have to say that it looks similar to the hyperblack except for the cracked look/texture and the slight silver highlights in certain areas. All in all, I think it looks amazing on this device.
Click to expand...
Click to collapse
Looking good!! I've ordered mine but with red logo cutout. Is there good grip with the black dragon skin? My only quirk with this device so far is how slippy the back is and was hoping the black dragon skin would sort that out for me..
wedgess said:
Looking good!! I've ordered mine but with red logo cutout. Is there good grip with the black dragon skin? My only quirk with this device so far is how slippy the back is and was hoping the black dragon skin would sort that out for me..
Click to expand...
Click to collapse
From what dBrand have been saying, the dragon skins look to be quite grippy. I'd love to use skins over cases but don't trust myself enough
DarkExistence said:
From what dBrand have been saying, the dragon skins look to be quite grippy. I'd love to use skins over cases but don't trust myself enough
Click to expand...
Click to collapse
I don't trust myself either!! Thinking of getting one of the rhinoshield bumpers so I can keep it looking nice, on the back at least :victory: Hopefully that along with the tempered glass SP I have one will protect it.. and so long as the skin is grippy I hopefully shouldn't drop it.
wedgess said:
I don't trust myself either!! Thinking of getting one of the rhinoshield bumpers so I can keep it looking nice, on the back at least :victory: Hopefully that along with the tempered glass SP I have one will protect it.. and so long as the skin is grippy I hopefully shouldn't drop it.
Click to expand...
Click to collapse
Just be careful with that combo on a Rhino Shield. they can rip off Tempered glass and the cases lately have been so tight getting them on with even a skin on is really hard and taking it off is even worse. I damaged my OP3 trying to get the Rhino Shield off when using a skin. best results is to cut the skin so it doesn't go up and down the sides or corners of the phone.
I still remember ordering that case there was no warning on the prouduct page about it not working with tempered glass and when I complianed and got nowhere a sudden disclaimer went up :/
wedgess said:
Looking good!! I've ordered mine but with red logo cutout. Is there good grip with the black dragon skin? My only quirk with this device so far is how slippy the back is and was hoping the black dragon skin would sort that out for me..
Click to expand...
Click to collapse
It definitely has some texture that helps the phone be less slippery but not as much as I expected. But it certainly help add a decent amount of grip, especially on the sides of the phone which are very thin and rounded.
Roxas598 said:
Just be careful with that combo on a Rhino Shield. they can rip off Tempered glass and the cases lately have been so tight getting them on with even a skin on is really hard and taking it off is even worse. I damaged my OP3 trying to get the Rhino Shield off when using a skin. best results is to cut the skin so it doesn't go up and down the sides or corners of the phone.
I still remember ordering that case there was no warning on the prouduct page about it not working with tempered glass and when I complianed and got nowhere a sudden disclaimer went up :/
Click to expand...
Click to collapse
Ye my mate was saying the RhinoShield on his OP3t is way too tight and difficult to get off. I saw one on a S8 and looks a fair bit looser, hoping it's a bit looser on the OP5 and fits.
Thanks for the heads up though:good:
HueleSnaiL said:
It definitely has some texture that helps the phone be less slippery but not as much as I expected. But it certainly help add a decent amount of grip, especially on the sides of the phone which are very thin and rounded.
Click to expand...
Click to collapse
Thanks, so long as it adds some amount of grip I'll be happy. If not I might just end up getting a case:good:
wedgess said:
I don't trust myself either!! Thinking of getting one of the rhinoshield bumpers so I can keep it looking nice, on the back at least :victory: Hopefully that along with the tempered glass SP I have one will protect it.. and so long as the skin is grippy I hopefully shouldn't drop it.
Click to expand...
Click to collapse
never had a bumper but always heard rhinoshield were the best, saw some youtube videos of them being dropped from 10 ft and surviving haha
I went with the dragon back myself...
ThaFranchize15 said:
I went with the dragon back myself...
Click to expand...
Click to collapse
So it does actually look as good in real life as in the renders then eh? How does it feel?
I know DBrand are big state side but with the phone not being available for our American counterparts it'd doubtful they'll do a skin for the P20 Pro so I've order a brushed slate skin via xtreamskins. Cost me £6.50 which I didn't think was too bad. I can post picture and give an overview of how easy/difficult it is to fit and photo's of how it looks if there's much interest from folks on here? https://www.xtremeskins.co.uk/products/huawei-p20-pro-skins?variant=8065942650908
Deano1889 said:
I know DBrand are big state side but with the phone not being available for our American counterparts it'd doubtful they'll do a skin for the P20 Pro so I've order a brushed slate skin via xtreamskins. Cost me £6.50 which I didn't think was too bad. I can post picture and give an overview of how easy/difficult it is to fit and photo's of how it looks if there's much interest from folks on here? https://www.xtremeskins.co.uk/products/huawei-p20-pro-skins?variant=8065942650908
Click to expand...
Click to collapse
I was just looking at this today. Instead I ordered a few cases off eBay. They look like they better protect the cameras. https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/112914026578
I'd appreciate that
Got my skin from these guys today. It's not that great of a product but works for the price. Application is pretty straight forward but a pain getting it to align with the cameras and flash. The good part is that you can peal and reapply and it doesn't affect the stickiness of the skin. The edges don't stick down at the rounded corners so you definitely need a case over this or it will peal off
Ereckson said:
Got my skin from these guys today. It's not that great of a product but works for the price. Application is pretty straight forward but a pain getting it to align with the cameras and flash. The good part is that you can peal and reapply and it doesn't affect the stickiness of the skin. The edges don't stick down at the rounded corners so you definitely need a case over this or it will peal off
Click to expand...
Click to collapse
Looks kinda cool with the case, but then again I got the blue colour so don't think I want to cover that up anyway.
DaveP2611 said:
Looks kinda cool with the case, but then again I got the blue colour so don't think I want to cover that up anyway.
Click to expand...
Click to collapse
The only issue I have with this is the edges not sticking down. Let me know your thoughts on the blue skin.
Heat it on with a hairdryer dude
Ereckson said:
The only issue I have with this is the edges not sticking down. Let me know your thoughts on the blue skin.
Click to expand...
Click to collapse
Ah sorry I meant I picked up the Midnight Blue P20 so wouldn't put a skin over it anyway.
Damn, was hoping to get a skin so i can use it without a case and keep the back scratch free
The edges not sticking down is unfortunately a deal breaker there
Check out https://www.xtremeskins.co.uk
I'm currently running their carbon Fibre skin on my S8+ and it sticks great. Even around the edges. No issues whatsoever and good scratch protection. Can only recommend them. Just ordered a black camo one for my P20 pro.
Heat it
Neo_Sk8eR said:
Damn, was hoping to get a skin so i can use it without a case and keep the back scratch free
The edges not sticking down is unfortunately a deal breaker there
Click to expand...
Click to collapse
You need to heat skins on if the edges are curved.....get your mums hairdryer on it
I had same ssue with mine. Emailed Xtream Skins who offered to send out a replacement (I've gone for camo this time as slate doesn't look as good as on photo render).
They sad that they've changed the design and after looking back at their website you can see that the the skins now wrap around the sides of the phone.
Regards the sides not sticking. I put the case on over the skin and over night the skin stuck completely due to pressure from case. Beats the hairdryer technique that didn't work for me.
Thewarroom said:
You need to heat skins on if the edges are curved.....get your mums hairdryer on it
Click to expand...
Click to collapse
I'm a grown ass man.....
I'll get the Mrs hairdryer
Got a skin from them, fits and sticks perfectly. Definitely reccomended. Black camo looks great...
Neo_Sk8eR said:
I'm a grown ass man.....
I'll get the Mrs hairdryer
Click to expand...
Click to collapse
Any photo that I can take a look and decide to buy one? I interested in the black camo
I have got this one from 7layerskinz.com. Fits very nice.
Got my black camo skin from Xtreme in the UK. Came within 2 days. The video instructions are really straight forward, I got the back glass one only.
Would take a pic, don't have a spare phone at the minute to do so! Was cheap too. £6.99
Fitting was easy, the key is to activate the glue by using some gentle heat and pressure. No lifts on any corners or sides. No bubbles as it's got air release channels in the back, but you gotta push the air out before you seal the sides! Made that mistake on my iPhone seven last year.
It's definitely less slippy now with a skin on.
Are there any clear skins available state side? I got the Twilight color so would prefer not to hide it but still need some protection.
ajamils said:
Are there any clear skins available state side? I got the Twilight color so would prefer not to hide it but still need some protection.
Click to expand...
Click to collapse
Check out the SlickWraps man, they offer naked wrap with gloss and matte options, I am planning on getting the twilight color next month as well!! Quick question for yall, anyone has screen latency issue on this device? seems to be a common issue.
ajamils said:
Are there any clear skins available state side? I got the Twilight color so would prefer not to hide it but still need some protection.
Click to expand...
Click to collapse
Do remember that the application for clear skins will be problematic if it is not a wet install. With skin installation, generally you would have to handle the adhesive with your fingers and that means imparting fingerprints on it. With non-clear skins that isn't an issue as you will not be able to see the smudges. With clear skins you will and the only way to prevent this is to perform a wet install.