Related
All Further updates will be handled in this other thread
Pre Req:
1) Make sure to install Pantech PC Suite as it will install the correct drivers you WILL need
2) Install ADB and Fastboot
How to gain Root
jcase said:
and here is root, you need fastboot and adb
androidpolice.com/2012/04/09/pantech-burst-rooted-and-the-process-is-stupid-easy/
IOMonster saved the day here, without him you would have to wipe your phone and install modified leaked firmware to get root.
Very glad we decided to not release the initial root, sorry
If IOMonster wants to explain he can, I would prefer not to however.
Details
goo.im/devs/jcase/prestoroot.img
adb reboot bootloader
fastboot boot prestoroot.img
once phone boots, reboot it again, install superuser from the market
Click to expand...
Click to collapse
How to Install Clockwork Recovery
Originally Posted by attn1
tau.shadowchild.nl/files/cwm-5.0.2.7-presto.img.zip
unzip
adb reboot bootloader
fastboot flash recovery cwm-5.0.2.7-presto.img
fastboot reboot
Click to expand...
Click to collapse
Press Volume Down and Power when booting to get into recovery
I have no come up with any of this information. I just gathered from the previous post to make it easier to search. I will try and keep this updated that way we can have a quick reference post at the beginning of the thread
Saved for future use
***Will have a Links section once this gets established***
Using adb with Ubuntu Linux - forum.xda-developers.com/showpost.php?p=28041279&postcount=641
Step by Step Root Guide - androidpolice.com/2012/04/09/pantech-burst-rooted-and-the-process-is-stupid-easy/
***Special Thank you goes to:***
jcase
Attn1
IOMonster
bulletproof1013
903tex
jackattack79
sandix
mr72
and everyone I didn't get *will update as we go*
from marcusmarcus
marcusmarcus said:
Here is what I did to get root on mine, maybe it will clear up things for others.
*Note, I am on 64bit Windows so folders will be different on 32bit windows.
On phone:
go to settings > Applications > Development > turn on USB Debugging
On Computer:
1-Download and install Pantech PC Suite from c724062.r62.cf2.rackcdn.com/PantechPCSuite_1.0.10.3314.exe
2-Launch Pantech PC Suite and update if it asks. When PC Suite is fully updated, plug phone into computer until device is recognized.
3-Download and install Android SDK from developer.android.com/sdk/index.html
4-Start SDK Manager and check the box next to “Android SDK Platform-tools” and install package.
5-Download prestoroot.img from dl.dropbox.com/u/9772722/XDA%20Forums/prestoroot.img and save it to “C:\Program Files (x86)\Android\android-sdk\platform-tools”
6-Download cwm-5.0.2.7-presto.img from tau.shadowchild.nl/files/cwm-5.0.2.7-presto.img.zip and save it to “C:\Program Files (x86)\Android\android-sdk\platform-tools” as well
7-Now open your command line and navigate it to “C:\Program Files (x86)\Android\android-sdk\platform-tools” folder
Run the following command
Code:
adb reboot bootloader
When the bootloader screen shows up on your phone then wait a few seconds to make sure your phone is recognized by the computer then run the following command
Code:
fastboot boot prestoroot.img
After phone reboots itself, shut the phone down and turn it back on again.
Then run the following command
Code:
adb reboot bootloader
When the bootloader screen shows up again then type the following commands
Code:
fastboot flash recovery cwm-5.0.2.7-presto.img
fastboot reboot
8-When the phone boots up this time, download the play.google.com/store/apps/details?id=com.noshufou.android.su superuser app[/URL] from Google Play
---------- Post added at 09:10 PM ---------- Previous post was at 09:06 PM ----------
FYI,
I've tried uot.dakra.lt UOT Kitchen couple times so far and have been ale to change the font of the device and the color of the glow for overscrolling but my time and other icons up in the status bar disappeared (the "AT&T" still shows up there though). The Backup and Restore in CWM does work nicely though to get me back to before I installed the zip from UOT Kitchen. I'll try 1 mod at a time using UOT kitchen and see which is making the icons and time disappear from my status bar.
EDIT: I did notice one issue with CWM backups. The backup I did today saved the folder name as "1970-02-22.03.14.56". Some reason the date is wrong in the file naming, should have started with "2012-04-13", right?
Click to expand...
Click to collapse
I hope this helps
For those having trouble with a missing driver I followed the below instructions and installed PDAnet (I did so while in fastboot mode so I could see the drivers install) as soon as it installed and the drivers showed installed. I went back and uninstalled pdanet (leaving the needed drivers behind)
hawkwind212 said:
I solved my problem by referencing to part II of the following page:
theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/Describe
Be sure to download two programs PDANet and USBView (which you may not really need but it's a nice little program).
It's suppose to be "stupid easy" to root PANETCH Burst, but who ever said that left out that it's not so easy if you don't have all the proper driver on your computer. Anyway, so soon after the fastboot mode is brought up, you should notice the computer is telling you a new hardware is found. This is when the burst switches from PANTECH's ADB driver to something else, and only way for the command "fastboot boot prestoroot.img" to work is to find the proper driver for the new hardware call "Android" in the device manager. Now you want to install PDANet, and as soon as the installation process begin, it'll find the driver for the device "Android." and install the driver for you. Once the driver is installed, the installation process will tried to install whole bunch other things into your phone, but I really don't think it can install them in fastboot mode, so you'll probably want to terminate the process. Now type command "fastboot devices" and you should see some kind of output telling you that it's recognize the "Android" device. Now, and only now you can follow the rest of "stupid easy" rooting instruction.
Click to expand...
Click to collapse
Spoiler Alert: Noob question.
Does this method unlocks the phone SIM also?? If not, there is a method to do it??
Thank you
tremeree said:
Spoiler Alert: Noob question.
Does this method unlocks the phone SIM also?? If not, there is a method to do it??
Thank you
Click to expand...
Click to collapse
This method doesnt but sim unlock is currently also being worked on.
Is there a Mac version of any of this software?
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
tfranzman said:
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
Click to expand...
Click to collapse
What software? Root..?
Cwm?...drivers? Carrier unlock for another provider? Pdl? I'm confused on what your asking...
Sent from my PantechP9070 using xda premium
bulletproof1013 said:
What software? Root..?
Cwm?...drivers? Carrier unlock for another provider? Pdl? I'm confused on what your asking...
Click to expand...
Click to collapse
I think tfranzman is referring to Pantech PC Suite and Android SDK. The Android SDK I believe has a Mac version but I do not think the Pantech PC Suite has a Mac version.
<QUOTE>Download software installed on PC : Click Here
Download MyPhoneExplorer Client App which software installed on Pantech Burst/ Breakout. You must find this from android market or you can read my previous post to get this : Click here
Connect your Pantech Burst/ Breakout device using your USB Cable Data
Please restart your phone and your Computer
After restarting finished, Now launch the installed MyPhoneExplorer Client app on your Pantech Burst/ Breakout and click on OK or Enable and it will connect to the PC Automatically,
Note :
If connection doesnt start or error you can choose another Sync software like Android Sync Manager WiFi.
If you are want Pantech Burst/ Breakout to connect on Mac OS X please follow my previous post : iSync for Mac OS X . I hope you are enjoy with this software.If any problem for downloading ,please contact me anytime</QUOTE>
I don't have a mac so I haven't tested this but this is what I found with google
Any news on CM7/9?? Im already rooted and im just playing around with UOT Kitchen
Let me know, thanks
No news as of yet. there have been people stating they are working on this but we haven't recieved any updates in awhile that I know of atleast. Anyone else reading this please feel free to correct me
All Further updates will be handled in this other thread
tfranzman said:
Is there a Mac version of any of this software. I understand all of this started on a PC but does that mean Mac users are forever out in the cold ? I own a Pantech Burst and a MacBook Air. I don't have access to a PC nor will I in the future, in so far as being able to use any of the software referenced here.
Any suggestions?
Click to expand...
Click to collapse
There is only Windows version of Pantech PC suite. proof
Finn81 said:
There is only Windows version of Pantech PC suite. proof
Click to expand...
Click to collapse
they were asking if any of the software we are using would work on a mac. the answer is yes depending on what software you are refering too. the pantech suite (which has been useless to me with the exception it installed the drivers for me) is windows only. I had actually gotten the drivers originally at work by using pda net. The information I gave above is what I came up with after a quick google search. I'm not sure if that or pdanet for mac would have those drivers.
and again this thread has ended. please follow the links in my Signature (Burst love for discussion or burst essentials for rooting information
I keep tring to root this phone but phone gets stuck in the fastboot mode and does nothing what can i do for this?
sounds like you don't have the fastboot driver installed. all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
kagedws6 said:
sounds like you don't have the fastboot driver installed. all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
Click to expand...
Click to collapse
Can you point me to the right place to get the fastboot driver's please
mobgod said:
Can you point me to the right place to get the fastboot driver's please
Click to expand...
Click to collapse
kagedws6 said:
all futher questions should be pointed to http://forum.xda-developers.com/showthread.php?p=32885146
Click to expand...
Click to collapse
install PDAnet on your computer. it will install the drivers
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Try root for HaiPai I9220. For me it works.
Having the same problem here, Superoneclick freezes on step 7 iirc.
HaiPai didn't work for me either
So that: http://forum.xda-developers.com/showthread.php?t=1923764
There you will find this: http://www.mediafire.com/view/?othd1gf76pa97zg
It is 100% functional, but need more knowledge and skill.
Ok, I came a lot further this time, but still stuck.
As soon as I let Cygwin `patch` the recovery.img, it does the patching and stuff, but it doesn´t create a new recovery.img for some reason..
If you check page 13 of that PDF manual: I get all the same messages in Cygwin, except for that "Repacking" bit.
Any Idea why it isn't repacking?
Losing my nerves a bit because of Cygwin, what a horrible program to get to work properly. Installation went on beyond 100%, till about 2000% and then just started to count further in negatives >____<
You must have installed 7-zip archive program.
SuperOneClick should work for this device. You may try this:
1) unmount the sd-card, turn ON usb-debugging
2) turn OFF usb-debugging
3) connect device to PC
4) click "Root"
5) when "Waiting for Device" appear turn ON usb-debugging
6) when "Starting ADB Server..." turn OFF usb-debugging
7) then turn it back ON
8) and back OFF
9) repeat this while "Waiting for Device" appears again.
@Stovka: I have 7zip installed, the unpacking/extracting of the recovery.img goes fine in Cygwin, but for some reason it just skips the repack part.
@AndreyETO: As soon as I disable debugging mode, superoneclick stops the procedure, so I didn't get far with that
So sorry, I don't really know what is the problem...
It was all ok for me - the one problem was that I had not installed 7-zip, but after installing it worked exactly according to instructions.
If it were successful: after recording recovery.img to the phone is first necessary to go into CWM mode (no run phone) and install the root file attached. End CWM recovery mode is classically done by clicking on "reboot system now", but after the first time there appears one more option (just I don't know what name), which must be confirmed! Otherwise, when you restart the phone again, then will be loaded the original file and the recovery process must be repeated - upload modified recovery.img and then root file via CWM.
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
Hey, i also tried this, and it didn't work, after clicking on restore that the device restared and than on the comand promp console it said error: device not found, i tried repeating the process several times but it didn't work, any other ideeas?
Neither of those above work for me either.. So... any other suggestions?
Confirmare
sics3th said:
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Click to expand...
Click to collapse
( for P5 allview mtk6577 4.0.4 ics2 )
Search this Root_with_Restore_by_Bin4ry_v15.7 on the forum. It works like a charm (both on linux and windows ).
It use restore feature on the phone.
The link is here http://forum.xda-developers.com/showthread.php?t=1886460
http://forum.xda-developers.com/attachment.php?attachmentid=1398011&d=1350123242
Anyone found a safe way to root this phone? Or maybe a custom rom for this one?
I think it is a great phone which should has a place into xda forum
Root_with_Restore_by_Bin4ry_v15
i have downloaded version 15 of this, because v17 for some reason did not worked...
so go ahead and enjoy.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
i can confirm that this works.
now, can anyone tell how i can make a nandroid for this phone? couldn't find any image to boot with so i can see the partitions and use linux dd
U all can use this metod:http://forum.xda-developers.com/showthread.php?t=1886460 for rooting P5 Mini.
And watch this video tutorial:http://forum.xda-developers.com/showthread.php?p=33470626#post33470626
I rooted my P5 Mini with "Root_with_Restore_by_Bin4ry_v15" and it works fine.
works for P6 also
Flapperbol said:
Found another way to root, and it worked .
Click to expand...
Click to collapse
Same experience on Allview P6 Stony (P6_0201_V1179 software build). This method works for me - similarly I had to run the script (and the reboot cycle) 2x before it had an effect.
As pointers for others, before you try this method you need to make sure you have ADB drivers installed. Trying to install stock google drivers didn't work at all for me, what worked for me was installing latest PdaNet drivers (pdanetZ350.exe) from here: junefabrics.com/android/download.php *
Don't forget to install OTA Rootkeeper app afterwards and run it once - hopefully saves you the hassle of rooting again if the P6 should receive an incremental update.
Enjoy, thanks Flapperbol!
(*= sorry Im not allowed to post links)
Version 18 also works
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
neelz said:
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
Click to expand...
Click to collapse
u can install a new home launcher.i use nova launcher 2.0 prime and u can download icon package and install in nova
[ISSUE HAS BEEN SOLVED! - Download and use "ROOT Genius" to root this particular brand of tablet. I have personally tested it and can confirm it works on Firmware revisions: v1.0.07 and v1.0.9! Thanks to "brugos" for finding the fix and bringing it to my attention!]
Hey guys
I do hope I have posted this question in the correct forum, if not I do apologise.
As you can probably tell from the title, I am looking for a way to root my 9.7 inch Prestigio MultiPad 4 Quantum 9.7 tablet (Model: PMP5297C_QUAD).
I have been looking for a way to root this since December, and even though I have found several articles (non English) explaining how to root this device (and have been through all the relevant threads I could find regarding my device on XDA), all of the guides have been for firmware v1.0.3 - my tablet is v1.0.7. I went ahead and tried it anyway, and although CWM installed and launched fine, installing the SuperSU binary via CWM did nothing. It installs, but nothing appears in Android when I reboot, and installing SuperSU from Play Store alerts me that the SuperSU binaries are not installed.
I tried "Kingo Android ROOT" and that wouldn't even detect the device, which isn't surprising as it isn't listed on their website. However somebody on a similar thread (on XDA) suggested that the OP (who has the same tablet as myself) at least try it. I did try it, and sadly it doesn't work.
Device information:
Prestigio MultiPad 4 Quantum 9.7" Tablet
Model Number: PMP5297C_QUAD
Firmware: v1.0.7 (December 2013)
FW Build Number: PMP5297C_QUAD_20131204_V1.0.7
Android Version: 4.2.2
If there is anybody out there who has any idea what to try, then I am willing to listen. If anybody needs any other information, I am more than willing to give it
Cheers guys
Prestigio multipad 4 quantum 9.7
The same here..trying to find a way to root for the new firmware...still haven't got anything...
Yeah... doesn't seem to be a very popular brand of tablet :/ Which is a shame as its pretty damn snappy with the v1.0.7 firmware. I wanna get a resolution changer to work, but none I have tried will work without rooting. Only wanna drop the res for better gaming framerates lol
yeah agree...doesn't seem very popular... I guess we should wait some time more.... did you try rooting with the old firmware and then updating to the new firmware? I guess it wouldn't work anyway....
Nope... from past experience rooting phones updating the firmware breaks the root as v1.0.7 replaced the entire OS if I remember...
Tried the root for v1.0.3 while using v1.0.7... ClockWorkMod installed and works fine, but the SuperSU binary doesn't work/install It was a gamble incase it screwed anything up but luckily it didn't - however, it also didn't work
And yeah, looks like we will need to wait a while longer... I do hope someone out there somewhere knows what to do lol Just gotta find them or wait for them to find us lol
Hey dude...you still haven't find root? If not try with root genious... I got root now on my tablet...running the latest firmware 1.0.9
Regards!
Ah man! You are AMAZING! lol
I almost gave up trying to find a root - until now!
I had no idea that there was a new FW released a few weeks back, just updated it and downloaded "ROOT Genius" - worked first time!
Excellent work there dude, thank you so much and thank you for taking the time to share it with me, and the rest of the people out there who have been in the same situation as us who are still looking for a fix!
Now we have it! Excellent work!
You welcome!
Just curious what are you going to do to your tablet having root now?
Do you know if there is any posibility to install any rom or something like that?
Also knowing Prestigio I guess would be hard to find some updates hmmm
Hey man
Well the main reason I wanted to root first of all was to adjust the resolution of the display, it has a beautiful high resolution display as you know but some games... the FPS leave a lot to be desired. After doing some reading, some posts suggested lowering the display resolution to increase FPS - and the only way to do that was to root the device.
I did try one app, but it went a bit wrong lol. I was hoping it would readjust the resolution and resize the interface accordingly... instead it ended up changing the resolution, but the interface stayed MASSIVE. The device was inoperable and keep getting a "UI Error" constantly popping up making it unusable at all lol. Had to reflash and re-root so I am looking for another option
Beyond that, I have used custom ROMs in the past on my Android phones, but as far as I know, I believe there is only one ROM out there for our tablet and its based on CyanogenMOD I think... I may be wrong, but I thought I read something somewhere about it. Apart from that though, I am not really sure what else I will do now it is rooted Will open the door to some other apps for certain, but the OS itself seems fine and since the new firmware (v1.0.9) - it feels even faster than before!
What do you have in mind?
Yeah I noticed the issue of FPS in some games.... Well I didn't do many things yet I instaled Xposed and some modules.... and also I removed the navingation bar...is just that I dont like the way the navigation bar and status bar are together... thats why I was searching for another rom also which could have not the Ice cream sandwich bar.
I've found this: crewrktablets.arctablet.com where there are some roms with kit kat that may be work for our tablet but nothing confirmed yet...so I'm not sure if I'm gonna try it
and yeah with the new firmware is much faster thats cool.... but I'm almost sure will be forever in 4.2.2
It worked with MULTIPAD 4 QUANTUM 10.1PMP5101C-QUAD with last firmware too.
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
DyXen said:
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
Click to expand...
Click to collapse
Same problem. I can't get working driver for windows 10. Is it even posssible to upgrade my firmware on win 10? And btw DyXen there is already version 1.0.9 , maybe try that one. http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip
Tnx for this update
but its also useless cuz first i need to install drivers :S
DyXen said:
Tnx for this update
but its also useless cuz first i need to install drivers :S
Click to expand...
Click to collapse
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
yoyo97 said:
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
Click to expand...
Click to collapse
Ok, i tried those drivers too but no success. I think maybe i need other OS.
I have developers options ON and USB debugging turned ON. (I think that should be turned ON)
P.S. I changed to mass storage and program did recognize the tablet but when i clciked switch (tablet turned OFF) and then it did not recognize anymore - i think problems with drivers.
Update to 1.0.9
Hello again,
I finally made it
Here is the thing:
1) Download this update (1.0.9): http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip from @yoyo97 (thanks)
2) Dont use drivers in folder /Drivers_x32 or /Drivers_x64
Instead go to /tools/Driver (and use this one x86 or x64 - depends on your OS)
3) Follow instructions in manual:
start RKBatchTool.exe and if icon is not green click Switch. Wait for tablet to shutdown and you should get green icon. (if this doesnt help turn off your tablet manualy and press AND hold volume + button for about 6-7 seconds DONT release and plug in USB cable then you should get notification on windows and green icon in RKBatchTool.exe)
4) Choose the firmware image and click upgrade.
5) let the software do the trick
6) profit
7) for rooting i used an android app called kingo root https://www.kingoapp.com/ just download the app on tablet. When you start it just click root and let the app do the trick.
After around 2-4min your tablet should be rooted.
I was using windows 7 (x86)
If you need any information please let me know and I will be glad to help
Have a nice day,
DyXen
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
hyderaly said:
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
Click to expand...
Click to collapse
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Please help
kompjuterija said:
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Click to expand...
Click to collapse
Could you solve it? Cause I have the same problem
Welcome to my tutorial !
You can find others tutorials related to the Cube i6 :
Install windows 10
Install Android 4.4.4 (Stock & RemixOS)
I received the magnificent AllDoCube i6 Air 3G last week, and i've been struggling since to get updates,
firmware flashing and all of that working, I searched the whole web and the drivers/Firmwares are nowhere to find,
but on some chinese proxy-needed sites sometimes, or baidu which is a pain in the a** to download from.
So I decided to share the ways to update this tablet at all costs (heh, no worries, -NORMALLY- it wont brick)
Disclamer: This process might contain ROM hacking, this is for advanced users.
THIS TUTORIAL HAS BEEN TESTED ON i632GB1537XXXXXXX MODEL, AND WORKS ON IT,
WHEREAS IT HAS BEEN REPORTED THAT i632GB1522XXXXXXX MODEL BRICKED UPON DOING IT,
SO PLASE DO IT CAREFULLY, IF THE INSTALL VERSION IS 202 YOU SHOULD THINK ABOUT IT BEFORE TRIYING AS IT COULD BRICK!
Software included may be subject to copyright.
Flash your device at your own risk. Developer is not responsible for what you do on your device.
What you need:
Cube i6 Air (3G or Wifi)
Flash Drive (256Mo +)
OTG cable
USB Hub (3 Ports recommended)
EFI BIOS Firmware
DOWNLOAD THE FIRMWARE BEFORE STARTING SO EVERYTHING IS AVAILABLE WHEN YOU DO IT
https://drive.google.com/folderview?id=0B8YPw4HjmqNCZktOZy1OTEN2ZVE&usp=sharing
Get on the drive, go to your device folder, select the wanted version inside BIOS folder
What to do :
1.) Start by plugging the usb drive into your computer, and format it to FAT32 using any formatting tool
2.) Now you need to uncompress the downloaded firmware :
you will find a "Firmware_X.X.X" folder inside, take all of its content, and extract it to your freshly formatted drive.
here's what looks like the root of your usb:
3.) Your USB Drive is ready, now just plug the OTG cable to your tablet, plug your HUB onto that OTG
and fill it with your keyboard and the USB Drive just created.
4.) Press power button until you see the screen backlight, when you see it repeatidely smash "Esc" key on the connected keyboard.
You will see the bios 6 square configuration screen.
Hit "Boot Manager" and select your USB in the list.
5.) The tablet should now boot from your USB, booting to a UEFI Shell. Depending on your device, it might be either 64 or IA32.
Now you just let startup.nsh script do the firmware flashing init, it should drive you to a flashing BIOS screen.
6.) Follow instructions on screen and let the tool flash your BIOS automatically.
Once done, the tablet will shut down.
Congrats! You successfully updated your BIOS !
It is my first tutorial, i will post some photos of steps in the future so come back, the guide will be better soon !
Regards,
Max.
Hi,
I have bought the Cube i6 Air 3G a week ago and i'm still waiting for it to arrive.
Have you update the win 8.1 to win 10?
Does everything works correctly?
Regards
re
Hi, I successfully updated the BIOS as of now,
I changed the bootloader animation to nexus one on Cube ROM.
I also manager to boot on Android x86 but it had too many drivers issues.
Still, 4.4.4 stock cube is working and i reflashed to a new partition scheme of 9Go
and i'm currently testing some win10 pen drives for install, will keep you updated.
Édit: oh you were asking about thé tablet? Weil jack has default, charging takes hours, glass is plastic, firmware is pain but hell this is a goodamn good tablet for its price !
regards,
Max
stalker2106 said:
i'm currently testing some win10 pen drives for install, will keep you updated.
Click to expand...
Click to collapse
I achieved installing Win10 x32 Pro on Cube i6 Through hacking WinPE installation environnement, but now i'm struggling finding the drivers. touchscreen, battery and vital things like hd graphics are not working as of now. Will post a tutorial on how to install Win10 in given time when i'll get out of this mess!
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
gtbr said:
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
Click to expand...
Click to collapse
I did not try anything as i like "stock" versions of my windows, but tonight i got it working all the way !
My cube i6 is running perfectly windows 10 and oh my god what a paradise it is ! The tablet experience got way better onto that version.
Can you try to update from the icon you are talking about ? i'd be curious if it works. anyway, i'm currently writing+uploading for the win10
tutorial for this tablet, so you'll be able to flash it late tonight, or tomorrow.
EDIT: The dpi is correct in android, only the status bar icons and some other are not in correct dpi but that is KitKat issue I guess. still interested in resolving that though. I'm currently hacking android lollipop ROM also, i'll keep you tuned on that. For rooting, i used KingRoot, it worked, but after a reboot, it tells me "root" is wrecked, so i guess there is some investigation to do there, but I was mainly focused on getting windows 10 ENGLISH STOCK version running to share it with you guys.
EDIT2: Still uploading, but tutorial is here: http://forum.xda-developers.com/android/help/guide-how-to-install-windows-10-t3252042 and it should work on any Z37xx powered device. Enjoy !
Hello,
I'm using this tablet from 2 days now. great !
But, i got wifi problem after sleep : wifi chip cut and never found network anymore.
has to reboot, and all goes right.
same in win and android.
Did you hear about this ? many poeple complain about this.
Any trick or advice ? Is this bios correct this ? Is your bios work on i6 3g dual-boot ? (there is 2 bios for dual boot ?...)
Thanks !
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
gtbr said:
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
Click to expand...
Click to collapse
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
tysonpower said:
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
Click to expand...
Click to collapse
Check windows 10 Post, there is no need to update BIOS to fix this error, your USB has to be in GPT partition style, check answer on the other thread
But usually the bios update should work, as it did on my tablet. But why bother taking risk if you can get it working without it
Hi,
I have sucessfully updated to win10
I have bios 203 in my cube and serial i632gb1510xxxxxxxxxxx, does anybody have tried to update to 206 on such setup ?
What are the chances that I will brick my device ?
I have downloaded latest Cube i6 roms from cube site (may 2015) . There are two bios-es which have to be installed in chronological order.
Shall I do it first, and then try to update to 206 ?
Edit: I was not patient and tried it on my own.I have successfully updated bios and tablet has started to both android and windows
I will perform some functional tests afterwards.
Actual steps :
I have first downgraded bios to 201(provided here )
Flashed bios1 from link provided
Flashed bios2 from link provided
Flashed bios 206 from guide in first post
Edit2:
I have tested basic functionalities like : Gyro-sensors, WIFI, GPS, 3G network and yet everything works like charm.
Maybe a placebo, however I have the feel that android runs like two times faster
I do suggest to update the windows, however I take no responsibility if you will brick your device. Even if the setup is like mine, neither if it differs
Regards
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Many thanks and question
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
jan-netherlands said:
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
Click to expand...
Click to collapse
The truth is, the 206 BIOS provided is hacked off i6 remix repository from cube, so i guess there is no big deal flashing it on your device as it works on regular i6.
Moreover, you can use any version of the flash tool as long as you flash a correct rom for your device, which i would suggest to download from official cube repository or geekbuying or so.
Android Geecbuying
Hello Stalker,
Ok. Thank you!
I will try Geecbuying.
Hopefully the windows drivers will function.
There isn't a way to flash from USB I suppose?
Greetings
Hi, well, actually, you should flash over USB with à windows computer. MFT by Intel is recommended. I shall make some tutorial about Android installation and partition resizing.
flash and resize partitions
That is super. When you want to do so.
I was indeed wondering or there would be one android partition on the tablet or two partitions (one for android, one for windows).
I also questioned myself how to see that there are partitions.
In earlier times when I was working with a pc, i use F-disk or partition-magic for this kind of work.
But on the tablet I do not have a clue...
So if you could make me wiser on this, I would be very thankful.
Maybe you could boot on some gparted liveusb? Or inside efi shell some commands could help
bluefish007 said:
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Click to expand...
Click to collapse
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
thermoska said:
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
Click to expand...
Click to collapse
Ok thanks for the answer! So i can upgrade from 203 at 206 at one part or what do you think?
Here was a Guide. Someone said people don't care about Me or My Work so...
This doesnt work on US model of Xperia 5 IV ( XQ-CQ62) because Sony isnt allowing bootloader unlock in USA.
Meaning you cannot get unlock codes for your phone thru sony website ,thats a crucial step in this guide.
hello, i've tried flashing the patched file onto my device but it just seems to bootloop, i'm currently running 64.1.a.0.857
viper. said:
This doesnt work on US model of Xperia 5 IV ( XQ-CQ62) because Sony isnt allowing bootloader unlock in USA.
Meaning you cannot get unlock codes for your phone thru sony website ,thats a crucial step in this guide.
Click to expand...
Click to collapse
Wow......glad I got the JP version of a new phone for once! Otherwise it's still blowing my mind that Sony itself isn't scrutinizing root like damn-near every other manufacturer as of late.
It's been more than 7 years since I rooted my last phone. Now is everything very different. Thanks for the thread, I know what I will do this weekend.
Just got my 5IV (UK) and exactly the guide I was looking for but just a simple question
My last personal Sony was the Z3C and unlocking bootloader/rooting that had drm issues with the official camera etc
Does unlocking bootloader with 5IV have any app issues, do the camera apps all work exactly as before and any other imporant Sony apps?
Will I be able to use Sony OTA updates?
If all good, I'll be unlocking and rooting this weekend, cant wait.
Thanks
rawdealer said:
It's been more than 7 years since I rooted my last phone. Now is everything very different. Thanks for the thread, I know what I will do this weekend.
Click to expand...
Click to collapse
Bruh! You and me both!! I finally rooted my Asus Zenphone 6 this past October. A bunch of reading and forums lol. Also back 7-8 years ago there were plenty of Youtube videos. Now not so much! My Zenphone 6 just died today and I am 90% sure I'll be getting the Xperia 5IV which I was eyeing since announced. I was hoping my Zenphone would have given me one more year, but alas. I'm visiting here to get the scoop on rooting this in the event I want to. I feel your pain!
smudgy636 said:
hello, i've tried flashing the patched file onto my device but it just seems to bootloop, i'm currently running 64.1.a.0.857
Click to expand...
Click to collapse
HI, not sure if you solved it, had the same issue. So, as it gave an option to do full user reset (or something like that) I chose it. It then rebooted and I was back into the phone with the initial setup again.
I then re-installed the latest magisk app and it showed that magisk/root is installed.
As a test, I then installed f-droid and installed Adaway. I chose to configure in root mode,
the 'grant access' dialogue popped up and boom, root access provided.
Btw, if you do want to install Adaway too, enable systemless host in magisk preferences.
Trying it now... It's a bit of a hassle, but that's on Sony.
Edit: yep, works an absolute treat. One little remark: Wiping after installing Magisk isn't neccesary, afaict. Perhaps make it optional "in case of weird problems".
thany2 said:
Trying it now... It's a bit of a hassle, but that's on Sony.
Edit: yep, works an absolute treat. One little remark: Wiping after installing Magisk isn't neccesary, afaict. Perhaps make it optional "in case of weird problems".
Click to expand...
Click to collapse
So, no need to wipe all user data or?
how to hide root from GooglePay?
So I'm getting stuck on the OEM unlock bit. After entering the command I get this:
...
FAILED (remote: Command not supported in default implementation)
finished. total time: 0.004s
Click to expand...
Click to collapse
Any Ideas?
hasztagL said:
how to hide root from GooglePay?
Click to expand...
Click to collapse
Why would you need to? Play works perfectly fine with non-hidden root.
Either way, try enabling Zygisk in the Magisk manager. You might also have to check to enforce the DenyList, and check the Play app on the DenyList.
But really it's not neccesary in my experience. The only app that refuses to work properly is my banking app. In their infinite stupidity they demote rooted users to a PIN code instead of fingerprint, even though on a rooted device, the fingerprint is still more secure. But I digress, sorry.
Skv012a said:
So, no need to wipe all user data or?
Click to expand...
Click to collapse
I guess it was a catchall. Maybe if you've already been tinkering a lot, it might be a good idea to "start over", since Magisk can completely fluff up you phone if it's being interfered with. However, my phone was completely stock, other than being bootloader-unlocked, so in my case the answer is no, not needed.
No promises though. Just give it a go. Do have a backup ready.
thany2 said:
Why would you need to? Play works perfectly fine with non-hidden root.
Either way, try enabling Zygisk in the Magisk manager. You might also have to check to enforce the DenyList, and check the Play app on the DenyList.
But really it's not neccesary in my experience. The only app that refuses to work properly is my banking app. In their infinite stupidity they demote rooted users to a PIN code instead of fingerprint, even though on a rooted device, the fingerprint is still more secure. But I digress, sorry.
Click to expand...
Click to collapse
Google Wallet not work with root. With DenyList still not work.
Matrixclonk said:
So I'm getting stuck on the OEM unlock bit. After entering the command I get this:
Any Ideas?
Click to expand...
Click to collapse
It looks like you started fastboot mode. You should enter bootloader mode for the fastboot command for some reason
Also I had a problem in bootloader mode and had to manually update the driver in Windows for the phone.
When I was in bootloader, the adb devices and fastboot devices commands did not return anything, meaning the phone wasn't found.
So if someone else's phone isn't recognized in fastboot/bootloader mode you could try installing the driver manually like so:
Open the Device Manager in Windows and under under Other devices (probably), there will be a device named Android with a question mark (meaning no driver or problem with it.)
Then right click on it -> Update driver -> Browse my computer for drivers -> Let me pick from a list of available drivers... (you should have installed the drivers from windows (in file explorer, right click, install on the .inf file))
Then there under Android, from Google I had the ADB Interface driver which I selected and Installed it forcefully.
And after that fastboot comand worked normally.
alexdo said:
It looks like you started fastboot mode. You should enter bootloader mode for the fastboot command for some reason
Also I had a problem in bootloader mode and had to manually update the driver in Windows for the phone.
When I was in bootloader, the adb devices and fastboot devices commands did not return anything, meaning the phone wasn't found.
So if someone else's phone isn't recognized in fastboot/bootloader mode you could try installing the driver manually like so:
Open the Device Manager in Windows and under under Other devices (probably), there will be a device named Android with a question mark (meaning no driver or problem with it.)
Then right click on it -> Update driver -> Browse my computer for drivers -> Let me pick from a list of available drivers... (you should have installed the drivers from windows (in file explorer, right click, install on the .inf file))
Then there under Android, from Google I had the ADB Interface driver which I selected and Installed it forcefully.
And after that fastboot comand worked normally.
Click to expand...
Click to collapse
Thanks man, I was in fastboot because when I went to bootloader I always got the message waiting for device. Also weird I had to reinstall the driver each time i went into bootloader :S
@Miustone Hey. I rooted my phone following your guide and I have a question.
Sony have released an update was wodnering if I flash the latest update, will my settings/data be intact? Apparaently the update is only small, just wish I could flash that...not the whole 3.3GB
Thanks
After getting said from some Stock Tree ROM Cookers that People wont miss Me around Xperias (and that i havent developed that much), i just decided to take My Work offline and to remove also My Guides. Sorry for everyone who apprecciated My Contributions but You will get Stock FW based ROMs instead (one Day)! It wont have the quality or safeness of a good old SODP based ROM (since they refuse to work with it on a disrespectful way) but hope You will be fine with it somehow!
All the Best for the future,
Miu
Miustone said:
After getting said from some Stock Tree ROM Cookers that People wont miss Me around Xperias (and that i havent developed that much), i just decided to take My Work offline and to remove also My Guides. Sorry for everyone who apprecciated My Contributions but You will get Stock FW based ROMs instead (one Day)! It wont have the quality or safeness of a good old SODP based ROM (since they refuse to work with it on a disrespectful way) but hope You will be fine with it somehow!
All the Best for the future,
Miu
Click to expand...
Click to collapse
sad. i love your work.