Hey guys,
I have searched all over internet but could not find a complete guide for unbricking my phone type, so I came here asking experts about this
My Phone is OPPO Mirror 5 (MSM8916)+16GB, and I want to be sure that i can unbrick my phone if needed. Since I don't have a factory rom for my phone, I think the only way to unbrick it, is to have a raw copy from my eMMC to restore my phone health, am I right? And to apply this scenario I need to make my phone to enter "Qualcomm HS-USB Diagnostics 9006" mode using 8916_msimage.mbn, MPRG8916.mbn, rawprogram0.xml, and patch0.xml.
1- Can I use "8916_msimage.mbn, MPRG8916.mbn, rawprogram0.xml, and patch0.xml" from other MSM8916 + 16GB phones? Or are these files phone specific?
2- Can I generate or extract "8916_msimage.mbn, MPRG8916.mbn, rawprogram0.xml, and patch0.xml" from my phone using some tool? Or not?
Thanks in advance...
Any help will be appreciated.
MomenMamdouh said:
Hey guys,
I have searched all over internet but could not find a complete guide for unbricking my phone type, so I came here asking experts about this
My Phone is OPPO Mirror 5 (MSM8916)+16GB, and I want to be sure that i can unbrick my phone if needed. Since I don't have a factory rom for my phone, I think the only way to unbrick it, is to have a raw copy from my eMMC to restore my phone health, am I right? And to apply this scenario I need to make my phone to enter "Qualcomm HS-USB Diagnostics 9006" mode using 8916_msimage.mbn, MPRG8916.mbn, rawprogram0.xml, and patch0.xml.
1- Can I use "8916_msimage.mbn, MPRG8916.mbn, rawprogram0.xml, and patch0.xml" from other MSM8916 + 16GB phones? Or are these files phone specific?
2- Can I generate or extract "8916_msimage.mbn, MPRG8916.mbn, rawprogram0.xml, and patch0.xml" from my phone using some tool? Or not?
Thanks in advance...
Click to expand...
Click to collapse
How did you go with this i have a 9008 Bricked Mirror 5s too so any help be great..
MomenMamdouh said:
Hey guys,
I have searched all over internet but could not find a complete guide for unbricking my phone type, so I came here asking experts about this
My Phone is OPPO Mirror 5 (MSM8916)+16GB, and I want to be sure that i can unbrick my phone if needed. Since I don't have a factory rom for my phone, I think the only way to unbrick it, is to have a raw copy from my eMMC to restore my phone health, am I right? And to apply this scenario I need to make my phone to enter "Qualcomm HS-USB Diagnostics 9006" mode using 8916_msimage.mbn, MPRG8916.mbn, rawprogram0.xml, and patch0.xml.
1- Can I use "8916_msimage.mbn, MPRG8916.mbn, rawprogram0.xml, and patch0.xml" from other MSM8916 + 16GB phones? Or are these files phone specific?
2- Can I generate or extract "8916_msimage.mbn, MPRG8916.mbn, rawprogram0.xml, and patch0.xml" from my phone using some tool? Or not?
Thanks in advance...
Click to expand...
Click to collapse
You can search and download the stock rom from OPPO Website..just Google-ing it..
And I already twice root the phone..use KingRoot..and use Oppo Tools..
Aaaah.. QHSUSB_BULK..
Read this attachment document. There is not really a lot of thing about Oppo Mirror 5 on the web..
Nothing new good news??
Related
hello everybody,
The phone in question:
K-Touch U86 owns a 4.5-inch QHD screen with 960*540 pixel display, and QRD MSM8625Q SKUD Quad Core 1.2GHz processor, 1GB RAM, and 4GB storage. K-Touch U86 installs Android 4.1 OS.
Problem so far i was tring to root the phone with the cherry os rooting method and i made a serious mistake with this phone
I connected it to my laptop and was on the qopst mode "power + vol -" windows asked to format a disk and stupidly i did just that formatted the drive now the phone wont turn on with or without battery and when connected to a charger/laptop usb nothing on-screen
however when connecting to usb the following happens In device manager under (COM & LPT)
Qualcomm HS-USB QDLoader 9008 (COM 11)
Is there any way i can unbrick this phone and get it to boot up and make it live again?
P.S.I tried to reseach the issue online google, duck duck go and metacrawler however the results come out in several eastern languages i am unable to read, and in this forum it comes out with unrelated topics
thank you in advaced for any help you can provide
I have now got the QPST Tools does any one know what files i can use to re-flash recover my k-touch u86
pedromap said:
hello everybody,
The phone in question:
K-Touch U86 owns a 4.5-inch QHD screen with 960*540 pixel display, and QRD MSM8625Q SKUD Quad Core 1.2GHz processor, 1GB RAM, and 4GB storage. K-Touch U86 installs Android 4.1 OS.
Problem so far i was tring to root the phone with the cherry os rooting method and i made a serious mistake with this phone
I connected it to my laptop and was on the qopst mode "power + vol -" windows asked to format a disk and stupidly i did just that formatted the drive now the phone wont turn on with or without battery and when connected to a charger/laptop usb nothing on-screen
however when connecting to usb the following happens In device manager under (COM & LPT)
Qualcomm HS-USB QDLoader 9008 (COM 11)
Is there any way i can unbrick this phone and get it to boot up and make it live again?
P.S.I tried to reseach the issue online google, duck duck go and metacrawler however the results come out in several eastern languages i am unable to read, and in this forum it comes out with unrelated topics
thank you in advaced for any help you can provide
I have now got the QPST Tools does any one know what files i can use to re-flash recover my k-touch u86
Click to expand...
Click to collapse
You can use EMMC_DownLoad_V1.2.3 to redownload the bootloader.
tj_style said:
You can use EMMC_DownLoad_V1.2.3 to redownload the bootloader.
Click to expand...
Click to collapse
thank you will do a quick google search for the downloader will update as soon as i get results.
pedromap said:
thank you will do a quick google search for the downloader will update as soon as i get results.
Click to expand...
Click to collapse
Download this tool:
EMMC_DownLoad_V1.2.3.rar
Also this Baseband:
593115_8654_WCDMA_V2011.zip
1. Extract EMMC_DownLoad_V1.2.3.rar and 593115_8654_WCDMA_V2011.zip
2. Go to EMMC_DownLoad_V1.2.3 folder ad run EMMC_DownLoad_V1.2.3.exe
3. On EMMC_DownLoad_V1.2.3 interface click "SELPATH" button, point the path to 593115_8654_WCDMA_V2011.
4. Tick the DownLoad Bootloader options
5. Above the Download buuton enter the COMPORT number. In your case is COM11, so just write down "11".
6. Connect the phote to PC, and Press Download Button.
7. When the download process is finish, just continue to flashing the system with QUALFAST.
sorry for the delay but i am getting the following errors:
5x FastDownLoad Fail-11-time:26s
not sure why & does not provide a reason why, just repeats the same error in the following style path + error code
any other strategies tools out there?
pedromap said:
sorry for the delay but i am getting the following errors:
5x FastDownLoad Fail-11-time:26s
not sure why & does not provide a reason why, just repeats the same error in the following style path + error code
any other strategies tools out there?
Click to expand...
Click to collapse
Are you sure you have right COMPORT number?
tj_style said:
Are you sure you have right COMPORT number?
Click to expand...
Click to collapse
yes it is the right number, however after that fail code the COM11 port changes status from qdloader to none, after removing and re-inserting the cable re-displays COM11 qdloader.
not sure why that happens looks like it is unrecoverable at present, well i shll wait until next mobile phone in the mean time back to the huawei ascend Y100 for now
pedromap said:
hello everybody,
The phone in question:
K-Touch U86 owns a 4.5-inch QHD screen with 960*540 pixel display, and QRD MSM8625Q SKUD Quad Core 1.2GHz processor, 1GB RAM, and 4GB storage. K-Touch U86 installs Android 4.1 OS.
Problem so far i was tring to root the phone with the cherry os rooting method and i made a serious mistake with this phone
I connected it to my laptop and was on the qopst mode "power + vol -" windows asked to format a disk and stupidly i did just that formatted the drive now the phone wont turn on with or without battery and when connected to a charger/laptop usb nothing on-screen
however when connecting to usb the following happens In device manager under (COM & LPT)
Qualcomm HS-USB QDLoader 9008 (COM 11)
Is there any way i can unbrick this phone and get it to boot up and make it live again?
P.S.I tried to reseach the issue online google, duck duck go and metacrawler however the results come out in several eastern languages i am unable to read, and in this forum it comes out with unrelated topics
thank you in advaced for any help you can provide
I have now got the QPST Tools does any one know what files i can use to re-flash recover my k-touch u86
Click to expand...
Click to collapse
All greetings!
The same situation, prompt people kind what to do?
given up on that restrictive phone and binned it and then bought myself a jiayu G3T and after that a star z2
agan TJ-STYLE.... boleh minta file EMMC_DownLoad_V1.2.3.rar dan file 593115_8654_wcdma_v2011.zip. link di atas sudah ga aktif
terimakasih
Hi guys, i really hope you can help me, i m so deseperate...
After OTA Update my CATERPILLAR S30 bricked into bootloop, i can access to the stock recovery (wipe data/factory not fix it) and bootloader show me ; "DC CHECK"
I read that it could be my bootloader (emmc) wich it's corrupted...
The chipset is a Qualcomm Snapdragon MSM8909, of course USB debugging is disabled and i can't find any stock rom, backup for this phone....
Please HELP ME...i work hight in the mountain and if i cant communicate it will become....quite dangerous for me...
If someone has a backup (EU AREA), a stock rom or any solution for me ill be gratefull
Bye
Nobody can upload me OTA file (wich i ll .zip), boot.img, backup or any kind of solution please...?
AnY-One said:
Nobody can upload me OTA file (wich i ll .zip), boot.img, backup or any kind of solution please...?
Click to expand...
Click to collapse
What software version are you on?
Chuggers said:
What software version are you on?
Click to expand...
Click to collapse
Hello there and thanks helping me...
I'm AnY-One but i can't log in with; i dont know why...
I dont know what is my software version i only can say to you that the last update i tried to install came about 10-12/01 (EU France) and i bought this phone the 24/12 and i already did a first update.
So my phone stuck in bootloop (Qualcomm HS-USB QDLoader 9008 recognized) when i tried to install the 2nd update 10-12/01 so...
I have all qualcomm developpers tools with qualcomm flash utility and i can access to stock recovery...perhaps just a boot.img should work...
Pleassse help guys...
"and...as you can read; SORRY FOR MY ENGLISH"
---------- Post added at 05:32 PM ---------- Previous post was at 04:52 PM ----------
an update.zip that i can flash from recovery should be welcome
---------- Post added at 06:19 PM ---------- Previous post was at 05:32 PM ----------
Got it, i think software version (viewing in recovery mode) is LTE_D0201121.0_S30_0.017.01
Zi0nlive said:
-snip-
Click to expand...
Click to collapse
Is warranty not an option?
nagalun said:
Is warranty not an option?
Click to expand...
Click to collapse
it is but it takes time...and i like to fix my mistakes by my self...
Have you a solution for me? can you upload the OTA files or a backup rom .zip?
Zi0nlive said:
it is but it takes time...and i like to fix my mistakes by my self...
Have you a solution for me? can you upload the OTA files or a backup rom .zip?
Click to expand...
Click to collapse
You can access recovery?
Usually when you see "Qualcomm HS-USB QDLoader 9008" it is because the phone can't load the bootloader (bios), so I am a bit confused about the state of your phone.
You likely need more files than the OTA has.
nagalun said:
You can access recovery?
Usually when you see "Qualcomm HS-USB QDLoader 9008" it is because the phone can't load the bootloader (bios), so I am a bit confused about the state of your phone.
You likely need more files than the OTA has.
Click to expand...
Click to collapse
That's a good question ; yes i can access to QDloader HS-USB 9008 with qualcomm drivers ; I CAN ONLY acces to
recovery holding VOL+ then plugin in USB. Phone off then : POWER + VOL+ doesnt boot recovery.
Wipe Data/factory seems to work, adb sideload; device is regognized in adb shell but most of commands answer are: "FAILED (remote: unknown command)" when i choose reboot in bootloader it's the boot screen with 'DC CHECK MODE' left corner..
Is there someone reading me who has the same phone?
Is there someone able to upload me .img (system, boot ...) that i can flash with QPST Tools? Stock Firmware? Nandroid Backup?
Is there someone who can guide me to repair that phone stuck in bootscreen? I think the problem come from my stupidity fogetting to unroot (Kingoroot apk replaced by SuperSU) before OTA update.
How extract my proper firmware
Hello
How extract the om from the device
Help Me
Same problem...
I have the same problem too... Please help
sharing my experience in a similar quest
Hello ! You probably must have resolved the issue by now. Like you, I too had a similar issue ( Reliance Jio Lyf Wind4 - Haier L51)
In my nooby quest for a solution have made some progress. The learning is:
One needs : Mprg8909.hex, 8909_msimage.mbn, rawprogram0.xml, patch0,xml to recover.
If you can get hold of a phone similar to yours, you can dump all the partitions. That can then be used to get the required information to make your unique rawprogram0.xml. The process of dumping becomes very easy if the phone is root and you are running an insecure boot. Using basing Linux commands like fdisk,gparted,proc you can get and idea of your partition details. The dd command will help you dump the partitions.
Yes the tools to use is from the QPST suite or look for the stand alone emmcdl.exe
As your phone is showing the QUSB 9008 mode you need to be able to switch the phone to Emergency Download Mode after which you can use MIflash or similar tool to flash the ROm from the dumped images. Thats where the rawprogram0.xml comes in. It details partition information required to revive the phone.
Havent succeeded yet, but am feeling encouraged. Probably need to resolve syntax errors creating the rawprogram0.xml and figure out if just this much is enough to switch the phone to EDL.
After lurking here for months, this is my first post, therefore I request indulgence in case I have inadvertently erred
TooSour
AnY-One said:
Hi guys, i really hope you can help me, i m so deseperate...
After OTA Update my CATERPILLAR S30 bricked into bootloop, i can access to the stock recovery (wipe data/factory not fix it)
and bootloader show me ; "DC CHECK"
I read that it could be my bootloader (emmc) wich it's corrupted...
The chipset is a Qualcomm Snapdragon MSM8909, of course USB debugging is disabled and i can't find any stock rom, backup for this phone....
Please HELP ME...i work hight in the mountain and if i cant communicate it will become....quite dangerous for me...
If someone has a backup (EU AREA), a stock rom or any solution for me ill be gratefull
Bye
Click to expand...
Click to collapse
You will need:
Hi
I have a similar issue with a different phone (Reliance LYF LS 5014 - a.k.a. Haier HL-L51) Service centres will claim that the motherboard needs to be changed (and charge you an arm and a leg ;p) Even if you get the firmware image it wont help. Thats becuase if you are bricked and in the QLoader 9008 , you first have to get the phone in EDL (emergency download mode) only then can you use MI Flash et al to flash your ROM.
The route I am taking is as follows: got hold of a similar phone and dumped all the partitions using the dd command. Then getting hold of all partition information using gdisk/parted/df et al This is so that I can create a partition.xml. From this I could run a Python script ( PartitionTool.py) to get rawprogram0.xml, patch0.xml. Using emmcldl and partiton.xml I can create the 8909_msimage.mbn . Hopefully, armed with these and QPST /Miflash I should be able to revive my phone. I have read that one needs the mprg8909.hex to kick the phone into EDL but am not convinced that without it I will remain stuck. That file seems to be guarded like a state secret by phone manufacturers.
ALl this I have learnt the hard way over almost a fortnight. I confess that I do fall into the "noob" category and cant program/develop to save my life. Therefore it should be easy for anyone with the right amount of enthu
Cheers
Zi0nlive said:
Is there someone reading me who has the same phone?
Is there someone able to upload me .img (system, boot ...) that i can flash with QPST Tools? Stock Firmware? Nandroid Backup?
Is there someone who can guide me to repair that phone stuck in bootscreen? I think the problem come from my stupidity fogetting to unroot (Kingoroot apk replaced by SuperSU) before OTA update.
Click to expand...
Click to collapse
on continuing my quest for a solution
Havent given up yet.
Discovered two really useful utilities: emmcdl and fh_loader both work from the DOS command prompt and are useful to download images and partitions to the phone.
Managed to create a rawpartition0.xml which I think is for my phone ( LYF Wind 4 a.k.a Haier HL L51 and LS5014) For this I used a similar phone and after rooting it managed to extract start sector and size in kilobytes info for each of the partitions.
Also used EFS Professional to get a backup of emcc firmware.
Have successfully downloaded all the partitions but am failing at the bootloader (emmc firmware) part. Continuing my quest for a solution and will share whatever I figure.
Cheers
Vonageext4ts said:
Havent given up yet.
Discovered two really useful utilities: emmcdl and fh_loader both work from the DOS command prompt and are useful to download images and partitions to the phone.
Managed to create a rawpartition0.xml which I think is for my phone ( LYF Wind 4 a.k.a Haier HL L51 and LS5014) For this I used a similar phone and after rooting it managed to extract start sector and size in kilobytes info for each of the partitions.
Also used EFS Professional to get a backup of emcc firmware.
Have successfully downloaded all the partitions but am failing at the bootloader (emmc firmware) part. Continuing my quest for a solution and will share whatever I figure.
Cheers
Click to expand...
Click to collapse
1. Why can't you go to the Rjio service center and get it flashed? Just tell them it got screwed after an update.
2. How did you manage to root the phone? Mine is Flame1 which has same MSM8909 chipset.
I am very not happy with the stock ROM but I don't think anyone has come up with a custom ROM for this cheap chipset.
I have bricked my CAT S30 too. Is there someone who have a solution? Or can somehow make a ROM copy so I can somehow flash it to the phone? I made a lot of searching and can not figure out how to make the phone work again.
hello I need firmware for S30 because I lightened too much after the root and I deleted something I should not, is now locked in the home screen CAT, but I can get into fastboot and bootloader.
thank you guys
file for CAT S30
Hello
I purchased another CAT S30 which has just lit downloaded a system update and I extracted from the cache, now the load so you can work on it.
if you need other things tell me how can I copy them from working phone.
my I crashed after I canceled the DownloadProviderUi.apk files and perhaps I put not compatible. now I can only access the fastboot or DC CHECK mode.
I tried to flash the .zip program but by mistake, I tried to flash the update and installs it by error although it says it has been installed, and still does not start, remains in the white screen CAT
https://www.dropbox.com/s/trqfxvnp90qt8vn/__FUMO.zip?dl=0
Vonageext4ts said:
Havent given up yet.
Discovered two really useful utilities: emmcdl and fh_loader both work from the DOS command prompt and are useful to download images and partitions to the phone.
Managed to create a rawpartition0.xml which I think is for my phone ( LYF Wind 4 a.k.a Haier HL L51 and LS5014) For this I used a similar phone and after rooting it managed to extract start sector and size in kilobytes info for each of the partitions.
Also used EFS Professional to get a backup of emcc firmware.
Have successfully downloaded all the partitions but am failing at the bootloader (emmc firmware) part. Continuing my quest for a solution and will share whatever I figure.
Cheers
Click to expand...
Click to collapse
Hi.. i have a CAT S30 stuck in logo, how i can use your file? thanks
Hi got this same phone only two weeks ago, and broke it trying to root it, got stuck on Bootscreen, however I found an unofficial rom for the device, loaded into an SD card and applied via recovery and boom, its a working phone again.
If you still need help, let me know so I send you a link to the ROM.
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Costi979 said:
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Click to expand...
Click to collapse
So use ZTE tool studio emmc tool to unbrick your android.
Follow guide of Androidbrick.com.
The tool posted on these site is actually a ZTE tool studio tool by name of Androidbrick tool.
Just Google and download it from torforum.org
Already tried,not working.I cannot swich phone in download mode
Costi979 said:
Already tried,not working.I cannot swich phone in download mode
Click to expand...
Click to collapse
These tool unbrick your android when no fastboot, no recovery, not booting by anyways. Just detects in 9008 port. I am sure it's better than Qfil.
That`s the problem with port detection
How does this happened ?
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Barnabe02 said:
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Click to expand...
Click to collapse
Sorry if u have issues to. My problem started when i erased via adb one partition . Twrp works fine
Hi guys,
I have a problem with my Nubia z9 max (nx512j), I brick it and now it's only detected on my pc as Emmc mode (Qualcomm usb bulk ...) and pop lots of partitions to format.
So I need the rom stock with the files to restore it with the studio tool of Qualcomm. But I don't know where find it. I am looking for the rawprogram0.xml patch0.xml and files .mbn . If anybody has an idea or know where find that I am interesting !! Thank you very much for all
me too
Get_Get said:
Hi guys,
I have a problem with my Nubia z9 max (nx512j), I brick it and now it's only detected on my pc as Emmc mode (Qualcomm usb bulk ...) and pop lots of partitions to format.
So I need the rom stock with the files to restore it with the studio tool of Qualcomm. But I don't know where find it. I am looking for the rawprogram0.xml patch0.xml and files .mbn . If anybody has an idea or know where find that I am interesting !! Thank you very much for all
Click to expand...
Click to collapse
Here there are roms for your device, just in chinese http://www.romzj.com/list/nubia_nx512j.htm also there are some custom roms.
But to unbrick it you need to put your device in qualcomm hs-usb qdloader 9008 first in download mode
hello everyone, just that someone gave me a samsung galaxy express 2 phone, put it on the battery and the next day did not start, I connected it to the pc and my pc says Qualcomm HS-USB QDloader 9008 (com6) how can i fix it?
Of course I need a firmware (QFIL) with the phone even if I can not find the firmware to make it go in 9006 mode, if not, someone who has the file debrick.img to upload it here on site exactly for this the phone is urgent, the phone has the factory software and no change has been made!
I know now that it's too late and I apologize if I did not post where I should be new on this site
thank you
laurentiu340 said:
hello everyone, just that someone gave me a samsung galaxy express 2 phone, put it on the battery and the next day did not start, I connected it to the pc and my pc says Qualcomm HS-USB QDloader 9008 (com6) how can i fix it?
Of course I need a firmware (QFIL) with the phone even if I can not find the firmware to make it go in 9006 mode, if not, someone who has the file debrick.img to upload it here on site exactly for this the phone is urgent, the phone has the factory software and no change has been made!
I know now that it's too late and I apologize if I did not post where I should be new on this site
thank you
Click to expand...
Click to collapse
Have exactly the same problem, is there any solution outside?
Thanks!
skrotschu said:
Have exactly the same problem, is there any solution outside?
Thanks!
Click to expand...
Click to collapse
No, only a debrick image from another model write debrick.img file on sd card and write full firmware with odin!
can some one please share debrick image from hes working phone
Guide how to make it :
create a Debrick IMG :
-you need to have a rooted device
-need to install busybox
-need a terminal
-open terminal type
su
busybox dd if=/dev/block/mmcblk0 of=/sdcard/200mb.img bs=4096 count=50000
Then upload 200mb.img its in your sdcard
loonbg said:
can some one please share debrick image from hes working phone
Guide how to make it :
create a Debrick IMG :
-you need to have a rooted device
-need to install busybox
-need a terminal
-open terminal type
su
busybox dd if=/dev/block/mmcblk0 of=/sdcard/200mb.img bs=4096 count=50000
Then upload 200mb.img its in your sdcard
Click to expand...
Click to collapse
I think this problem has a lot of them but there is no way to solve than the debrick image and if the phone would go into download mode we still could not overwrite the firmware in this place it would be because of the error emmc_read_fail I saw in many people the error this would be a way to put the phone in sd card mode and from there the bootloader would copy on emmc i saw this thing at s3:
https://smyl.es/samsung-galaxy-iii-...ocument-how-to-repair-soft-bricked-galaxy-s3/
laurentiu340 said:
I think this problem has a lot of them but there is no way to solve than the debrick image and if the phone would go into download mode we still could not overwrite the firmware in this place it would be because of the error emmc_read_fail I saw in many people the error this would be a way to put the phone in sd card mode and from there the bootloader would copy on emmc i saw this thing at s3:
https://smyl.es/samsung-galaxy-iii-...ocument-how-to-repair-soft-bricked-galaxy-s3/
Click to expand...
Click to collapse
the method that you show is with USB JIG and then they show short on one of resistor on S3 is R313 .. but no idea what will be on SM-G3815 if even need to do that on it
loonbg said:
the method that you show is with USB JIG and then they show short on one of resistor on S3 is R313 .. but no idea what will be on SM-G3815 if ever need to do that on it
Click to expand...
Click to collapse
yes ... I understand, the only solution remains debrick.img, if it does not work, I do not know what else we can do!