Related
So, my emails arrive late, the stock messaging app doesn't show new texts unless you scroll down when you open it (!!!), replacement sms apps have been wonky as well,... In general things just aren't updating correctly. I've made sure to go through the power management menus to allow apps to do what they need to but no go.
Anyone else had this problem? The battery life, size, and tethering capabilities are nice, but I just put my sim back in the Note 2 as those problems are making using this too unreliable.
Same problem here
I also have this problem, and I believe several people mentioned this in different places, so following is what I have done so far, not sure if this help your case, I am still monitor my phone since I just change my settings a few days back.
Standard steps includes:
("the app" below mean the application you have problem receive notification)
1. Set the app as protected in the Battery Saving settings.
2. Allow the app run in background.
3. In Wifi advanced settings, set to "always" during sleep.
4. Set power saving mode from "Smart" to "normal" .
I still have problem after all above steps, so I have make following attempt:
1) Disabled/Freeze "Phone Manager" system app.
2) Another app is "Power Genie", this app still run even I freeze it. So I have to use Root Explorer to rename them
under /system/app, rename HwPowerGenieEngine3.apk to HwPowerGenieEngine3.apkk, and rename HwPowerGenieEngine3.odex to HwPowerGenieEngine3.odexx
then reboot to recovery, clear cache, and dalvik cache, then reboot.
Again I am still testing this... HTH.
Just want to write a update, I think this resolved app got killed issue in my phone.
I think I found what was messing with my texts. I had mysms installed to backup and send texts to my N7. There's no way to select the stock app as the default messaging app. I ended up deleting mysms and only downloading it when I switch the sim into my Note 2.
The bigger problem is with Spotify. Even with it saved as a protected app it turns off about two minutes after the screen turns off, rendering the app almost useless. Wtf??
Mine works idk. it has to be a setting. hmm. you sure you have wifi on when screen is off. it is it's own setting on this phone
My notifications seem to quit working at times and I notice when using root explorer that my ext SD isn't showing
I wonder why my phone is working with notification (I even have ac display working to turn the screen on for 10 seconds when receiving a text message or email from work) I also use Spotify every day since I'm a premium member. No issues at all. I'm even able to change the volume and skip track and play and pause from my LG Tones
---------- Post added at 09:14 AM ---------- Previous post was at 09:13 AM ----------
make sure Spotify is set to run in background not just a protected app otherwise when you shut your phone off it will end the app. that might be your problem.
xordos said:
I also have this problem, and I believe several people mentioned this in different places, so following is what I have done so far, not sure if this help your case, I am still monitor my phone since I just change my settings a few days back.
Standard steps includes:
("the app" below mean the application you have problem receive notification)
1. Set the app as protected in the Battery Saving settings.
2. Allow the app run in background.
3. In Wifi advanced settings, set to "always" during sleep.
4. Set power saving mode from "Smart" to "normal" .
I still have problem after all above steps, so I have make following attempt:
1) Disabled/Freeze "Phone Manager" system app.
2) Another app is "Power Genie", this app still run even I freeze it. So I have to use Root Explorer to rename them
under /system/app, rename HwPowerGenieEngine3.apk to HwPowerGenieEngine3.apkk, and rename HwPowerGenieEngine3.odex to HwPowerGenieEngine3.odexx
then reboot to recovery, clear cache, and dalvik cache, then reboot.
Again I am still testing this... HTH.
Click to expand...
Click to collapse
I can't modify or remane the two files
caymal said:
I can't modify or remane the two files
Click to expand...
Click to collapse
Yeah root is required to rename system apps.
xordos said:
Yeah root is required to rename system apps.
Click to expand...
Click to collapse
yeah, there's not root for the moment for my model (mt2l05 4.4.2 EMUI 3)
but, did it work ?
it works in my phone. But you know, some mate2 owners don't have this issue at all.
May be an issue with APN settings. What I had when I first got the phone and what my settings are now seem much better especially when breaking up data and MMS into two different it independent panes. Once set to fast.t-Mobile.com and APN type default,supl,hipri the second selectable APN labeled for MMS as APN type and everything else identical and all hand offs via WiFi or mobile data are seamless. I was having various network issues prior to changes made to build.prop and default APN and once phone went to sleep it would not get alerts or transition to active/awake very well.
bob60626 said:
So, my emails arrive late, the stock messaging app doesn't show new texts unless you scroll down when you open it (!!!), replacement sms apps have been wonky as well,... In general things just aren't updating correctly. I've made sure to go through the power management menus to allow apps to do what they need to but no go.
Anyone else had this problem? The battery life, size, and tethering capabilities are nice, but I just put my sim back in the Note 2 as those problems are making using this too unreliable.
Click to expand...
Click to collapse
Yup yup, same here. I'm using Nova Launcher + TeslaUnread Plugin. Also stopped using my previous favorite 3rd party SMS replacement, Chomp, and now I'm back on stock SMS. The plugin seems very stable to me, I get a little number bubble on my SMS app on the homescreen, even if the notification doesn't come through on the status bar. Not exactly a fix, but it's been a decent workaround for me.
Huawei Ascend Mate2 problem solved
xordos said:
it works in my phone. But you know, some mate2 owners don't have this issue at all.
Click to expand...
Click to collapse
I was able to get my phone to connect with my surge hr Fitbit. Just wasn't reading directions correctly. The Surge hr is a nice product, now if I could only squeak out more time between charges. Roughly 3 days is the most I get between charges. I turn off the notifications when not needed.
I haven't posted in a while, but I've run into a problem.
I recently got the Aplus GV18 smartwatch. The watch requires an app called BTNotification to be on my phone; the app pushes notifications from my phone to the watch. However, if I leave the phone for any length of time then the app turns off and I don't get notifications.
I downloaded the app on another phone of mine and it stayed connected overnight. So it isn't the watch. I've tried just about everything I've found. I have:
-Changed the battery mode to "Normal"
-Disabled "Phone Manager" and the "Power genie" thing
-Fiddled with the # of background processes in the Dev options
-Changed the WIFI to stay on even with the screen off
-Other things in various threads
Any ideas??
Gir357 said:
I haven't posted in a while, but I've run into a problem.
I recently got the Aplus GV18 smartwatch. The watch requires an app called BTNotification to be on my phone; the app pushes notifications from my phone to the watch. However, if I leave the phone for any length of time then the app turns off and I don't get notifications.
I downloaded the app on another phone of mine and it stayed connected overnight. So it isn't the watch. I've tried just about everything I've found. I have:
-Changed the battery mode to "Normal"
-Disabled "Phone Manager" and the "Power genie" thing
-Fiddled with the # of background processes in the Dev options
-Changed the WIFI to stay on even with the screen off
-Other things in various threads
Any ideas??
Click to expand...
Click to collapse
Did you make it a Protected App?
I did, it didn't work.
I ended up disabling the entire "Phone Manager" app.
Sent from my MT2L03 using XDA Free mobile app
Huawei rooting
xordos said:
Yeah root is required to rename system apps.
Click to expand...
Click to collapse
Yes - notification problems actually cost me a job.... I received a phone message notification nearly 2 days after it was left on my phone.
I'm going back to the forum to to follow unlock instructions after getting the unlock code just today. I want to root the phone.
I am having problems with disappearing navigation keys. Once I go
to an app, I cannot get out of it. I have to constantly restart my phone. Do you have a solution?
Ever since I got the most software update earlier July 2017 on my Zenwatch 2, my Zenwatch 2's battery is horrible, it barely last 10 hours with a little usage with brightness set to lowest. I did factory reset hope to fix the issue, after I did factory reset I was trying to download my watch face back to my watch, I noticed it is not showing up at all so I try download any other watch faces and none of it are showing on the Android Wear app. Currently I am stuck using only stock watch faces. Anyone else having similar issue?
You have to add the custom watch faces in face designer on the watch. Swipe left and tap add more watch faces at the right hand end of the list of watch faces. You need to also have the custom watch face app or apps installed on both your phone and watch.
You will need to go into your play store on the watch and add the custom face apps to the watch. You should see any app that is on your phone and which has a complimentary watch app in the list at the bottom of the scroll called apps on your phone.
autosurgeon said:
You have to add the custom watch faces in face designer on the watch. Swipe left and tap add more watch faces at the right hand end of the list of watch faces. You need to also have the custom watch face app or apps installed on both your phone and watch.
You will need to go into your play store on the watch and add the custom face apps to the watch. You should see any app that is on your phone and which has a complimentary watch app in the list at the bottom of the scroll called apps on your phone.
Click to expand...
Click to collapse
I did do that, before the new update any watch faces I download show up in the Android Wear app, right now none of the custom watch faces I download are showing in Android Wear.
They won't. It works a bit different now. You have to use the app that comes with each one to manage them and then add them to your watch as I detailed.
Read a better explanation at the provided link. https://support.google.com/androidwear/answer/6140435?hl=en
autosurgeon said:
They won't. It works a bit different now. You have to use the app that comes with each one to manage them and then add them to your watch as I detailed.
Read a better explanation at the provided link. https://support.google.com/androidwear/answer/6140435?hl=en
Click to expand...
Click to collapse
I noticed only the watch faces I download directly from the Watch's Play store showed up on my watch and my Android Wear app, but any watch faces I download from Play store on my phone is not showing up on neither my watch or Android Wear, so base on what I found out is that if any of my previous purchase of watch faces didn't found on the app store on my watch that basically mean it is not supported in the latest version of Android Wear.
That could bead well. Just like anything the app developer has to update his or her app to work with aw 2.0
henban89 said:
I noticed only the watch faces I download directly from the Watch's Play store showed up on my watch and my Android Wear app, but any watch faces I download from Play store on my phone is not showing up on neither my watch or Android Wear, so base on what I found out is that if any of my previous purchase of watch faces didn't found on the app store on my watch that basically mean it is not supported in the latest version of Android Wear.
Click to expand...
Click to collapse
You must go on the "PlayStore" app on YOUR watch and look at the section "app from phone" to install faces/apps wich is yet on your phone. With Wear 2, phone faces/apps are not automatically installed on the watch. Users must install all or only the one they want.
dersie said:
You must go on the "PlayStore" app on YOUR watch and look at the section "app from phone" to install faces/apps wich is yet on your phone. With Wear 2, phone faces/apps are not automatically installed on the watch. Users must install all or only the one they want.
Click to expand...
Click to collapse
If that the case then I will say I HATE this update, it used to be so easier if I want to download watch face on my watch I can download on my phone Play Store then it will automatically add to my watch. Also I quite sure new update rendered my Zenwatch's battery unusable, my battery drop 100% to 5% within 10 hours, I used to get to able through almost 2 full days without charging it.
Have you performed a factory reset on the watch?
autosurgeon said:
Have you performed a factory reset on the watch?
Click to expand...
Click to collapse
Yes, twin already. Didn't helped for now I am force to turned off ambient mode and set brightness to lowest just get watch with usable battery life again though still no luck getting back the watch face "LED Time" I purchased download to my watch. I am currently addressing this issue to the developer who made that face watch so hopefully that issue can be fixed from the developer who design the watch face. I am extremely irritated with new update that screw up my watch. By the way trying find watch face on my watch by typing in name with small tiny screen was fun! (sarcasm). I wish someone would make those developers who released the latest Android Wear update to type on their Smartwatch with their life depend on it.
Turn off automatic wifi as that uses lots of power and likely you did not have that turned on with 1.5
My battery life was pretty bad for a few days after the update, but once I let it run down completely and die, then charge to 100% it was back to normal.
neezy13 said:
My battery life was pretty bad for a few days after the update, but once I let it run down completely and die, then charge to 100% it was back to normal.
Click to expand...
Click to collapse
I hope that is the case, I charge my watch to 100% took it off the charger around 1pm by 11pm my battery life down to 5%. Since I turn ambient mode off battery seen to getting better even though I previously had ambient turn on the entire time before the update and my watch managed to last almost 2 full days.
autosurgeon said:
Turn off automatic wifi as that uses lots of power and likely you did not have that turned on with 1.5
Click to expand...
Click to collapse
Actually I did have my wifi turn on as well as ambient turn on before 2.0 update. that was my setting and it lasts me almost 2 days. I don't use my watch to make call or send text message, I mainly use it just to check a few notification though out the day and obviously to tell time so I don't have heavy usage on it.
The latest update to the Android Wear app on your phone.should allow watch face modding and changes once again from the app.
So, I just received my watch today and I was excited to set it up, but one thing didn't work. The Watch Face Settings inside the Mi Fit app doesn't seem to do anything in the sense that when I try to access it, there is a blue line showing something is loading, but then I am greeted with a blank page.
It need active internet connection to load the watchfaces.
Check your phone Internet connection.
ebeldamasta said:
It need active internet connection to load the watchfaces.
Check your phone Internet connection.
Click to expand...
Click to collapse
I'm connected over Wi-Fi. I should probably try on 4g.
Adrosmart said:
So, I just received my watch today and I was excited to set it up, but one thing didn't work. The Watch Face Settings inside the Mi Fit app doesn't seem to do anything in the sense that when I try to access it, there is a blue line showing something is loading, but then I am greeted with a blank page.
Click to expand...
Click to collapse
I have the same problem
I've been having the same issue since I bought the watch. It's pretty frustrating, since I am not a big fan of the stock watch faces. I've already tried clearing the data of the app and setting up the watch from scratch.
Ni4y said:
I've been having the same issue since I bought the watch. It's pretty frustrating, since I am not a big fan of the stock watch faces. I've already tried clearing the data of the app and setting up the watch from scratch.
Click to expand...
Click to collapse
Did it help? Yesterday I restored my watch and mifit app to factory settings but this did not help
hello , to all
to use Watch Face Settings you can try to use some VPN software to change location to Hong Kong for example...
- sometimes here are problems with connecting to amazfit server from non-china locations((
I tried using HonkKong server using Turbo VPN(android app), doesn't seem to be working. If it works for anyone do let us know
Can't check it now... I have this problem earlier.
Now watch face settings is working (Mifit 3.2.3.1 LolexMod, Bip FW v0.1.0.43)
I try to use Honk kong VPN
And.. The same problem, i cant see watch faces... My version is 3.2.7.2
Same problem. Installed a new watch face through the application notify & fitness for amazfit
Fixed
I managed to fix the error by connecting the Bluetooth clock and being connected, erase the cache and that's it.
I hope it will be helpful.:good:
Stovetoplime said:
I managed to fix the error by connecting the Bluetooth clock and being connected, erase the cache and that's it.
I hope it will be helpful.:good:
Click to expand...
Click to collapse
Just got my bip today and can't see anything on "Watch face settings" page.
Please can you explain your fix in a little more detail please. I tried turning bluetooth on and off, and having wifi on/off but no luck. When you say erase the cache how do I get to that screen? Thanks
I've the same issue. Not yet solved.
Marco1015 said:
I've the same issue. Not yet solved.
Click to expand...
Click to collapse
Seems to be working now, strange
If you login with FB or Google Account please sign out then try to login using Mi Account. That's work for me
riyadibr said:
If you login with FB or Google Account please sign out then try to login using Mi Account. That's work for me
Click to expand...
Click to collapse
1. Unpair Amazfit
2. Sign out Mifit
3. Sign in with Mi Account
4. Pairing Amazfit
5. Done, open Watchface Settings
riyadibr said:
1. Unpair Amazfit
2. Sign out Mifit
3. Sign in with Mi Account
4. Pairing Amazfit
5. Done, open Watchface Settings
Click to expand...
Click to collapse
This doesnt work. It seems something is broken on the page that gives all the list of watch faces. I have another app for custom watch faces which shared a message about something on similar lines.
Solution
I had the same issue, "Local watch faces" is not showing anything, but they seem to be loaded under "Online watch faces". So download a new watch face, for example with "Amazfit Bip & Cor WatchFaces" app, remember the watch face your are substituting. Then go to "Online watch faces", choose the watch face you have substituted (which will still show the original image, not the new watch face!!!) and there you go, your chosen watch face will be loaded to the watch, not the original one.
Quiet confusion really, took me a while to realize this.
Solved blank watch face settings for Amazfit cor
Hello,
I deleted all watch faces downloaded for my amazfit cor. I reinforced to close my Mi app.
I reopened Mi app and reopened Watch Face Settings. It worked again to me.
Hopefully it helps you guys with the same issues as mine.
I hope someone can help, I have installed watch droid on both watch and phone, however when I try to run watch droid, it detects my watch and then informs me that I have and update. +++ then a big green tick appears.
When the watch tries to update I get a message . "your watch has blocked the update for security purposes" then the connection drops out.
Then i only get an option to press agree, if I press disagree or the 'X' I get "install failed" message and the loop starts again.
I was really hoping for Watch Droid phone to work as it seemed like the most useful app for the Amazfit so far.
Any suggestions would be greatly appreciated!!!
Thanks internet people.
you need to install manually the apk, or use this installer:
https://youtu.be/-3jpsPJTrWg
Watch wear assistant / phone app
I was attempting to use this app with a KW88 smartwatch. Downloaded fine to the watch but here is my problem. I have an iPhone. Is there a way or alternative app for iPhone? Thanks!
Forjas said:
I was attempting to use this app with a KW88 smartwatch. Downloaded fine to the watch but here is my problem. I have an iPhone. Is there a way or alternative app for iPhone? Thanks!
Click to expand...
Click to collapse
Nope, if you wan't 3rd party devices to work correctly with you smartphone you should have bought an Android phone. If you want a smartwatch that works correctly with an iPhone your options are the apple watch, the apple watch or the apple watch.
KW88 smartwatch
If there is an option to make calls and respond to text messages on the KW88 then which app needs to be downloaded? WII watch does not offer those options. KW88 connects to both android and OIS.
QUOTE=shadowcaster666;76196223]Nope, if you wan't 3rd party devices to work correctly with you smartphone you should have bought an Android phone. If you want a smartwatch that works correctly with an iPhone your options are the apple watch, the apple watch or the apple watch.[/QUOTE]
Forjas said:
If there is an option to make calls and respond to text messages on the KW88 then which app needs to be downloaded? WII watch does not offer those options. KW88 connects to both android and OIS.
Click to expand...
Click to collapse
If your watch's companion app on iOS doesn't do what you need, then there is not much you can do. Watch Droid works only with Android (you can infer that from its name). It should work with KW88, but you'd better try to get some help from the watch's specific forum or some Watch Droid forum (I don't know if there is one for it here on XDA). Good luck.
Works perfectly with a DM2018 (except it increases battery consumption quite a lot if you stay connected 24/24): it is the only one I found that keep the BT connection stable (the recommended FunDo in its standard version just didn't accept my phone number -that of the SIM card- as a valid one. The pro version did but did not maintain a stable BT connection. If you install from apk you must first authorize installation from 3rd party sources. I tested BT Connection and a few others: same instability.
treeml1 said:
I hope someone can help, I have installed watch droid on both watch and phone, however when I try to run watch droid, it detects my watch and then informs me that I have and update. +++ then a big green tick appears.
When the watch tries to update I get a message . "your watch has blocked the update for security purposes" then the connection drops out.
Then i only get an option to press agree, if I press disagree or the 'X' I get "install failed" message and the loop starts again.
I was really hoping for Watch Droid phone to work as it seemed like the most useful app for the Amazfit so far.
Any suggestions would be greatly appreciated!!!
Thanks internet people.
Click to expand...
Click to collapse
You need to authorize 3rd party apks. Check settings;
Hello. I have some problems with watch droid. With incoming calls, I have a standard call on my watch, not a watchdroid call. How to disable the standard display of a call. In the Amazphite application, I disabled the push notifications. I forbade the Amazite to work in the background and stopped it and now the call goes through the watchdroid, but as soon as I start the amazfit all over again, and I need to go to the settings of the phone to stop it again. Each time there is no desire to do this. Can everything be made easier? And immediately the second question: how do I respond to incoming calls using watchdroid? Now only 3 buttons: without sound, reject, paper airplane (printed answer).
Thank you.
quick question...can i have both amazfit app and watch droid connected? It seems i can only have one or the other
hello, i was changing the watchfaces for cutom ones, and after trying one, the GTS was freezed in succesfull synced or installed watchface, i dont remember the message, is the one after change the watchface in the app amazfit. well after that i decide to tunr off it pressing the bottom, i restarted it and after the animation message off amazfit it was black. after being black and not response during like 30s its restart itself, and that in loop. restart, aniamtin, black, restart, aniamtion, etc..... pls someone know how to fix it???? i tried to charge it and its charges prefect, its appears the anaimation of charging etc, but the problem is taht, is in bootlloop xd. pls someone who know who to fix it answer me pls :crying::crying::crying::crying:
its fixed. for fix it, put to charge. go to amazfit app and change the watchface for one of the app and it fixed itself. use this if someone have this problem
Hi, thanks for posting your fix.
Mine got rebooting in a loop after freezing when changing the watchface.
I though it was a problem with the watch itself...
Tried changing the watchface while charging like you sugegsted. It doesn't work at the first time, neither resetting to the default view on the device from Notify app, but setting a watchface from the app repositository did the magic !
Now I am playing with watchfaces again, in a regular operative device thanks to you sharing your issue and fix.
hi, i habe the same Problem with the boot loop. but how can you connect to the watch while charging? thx
Thank you for sharing the solution! Had the same problem and fixed it within minutes after reading your post.
Simply connect to the charger, GTS switches to stock charging watchface, and you use the official app to upload an official watchface! Simple as that.
I try it, but my phone can't connect to gts I put it to charge it's working, but when i open the amazfit app, can't see the watch.
rquattro said:
Thank you for.
sharing the solution! Had the same problem and fixed it within minutes after reading your post.
Simply connect to the charger, GTS switches to stock charging watchface, and you use the official app to upload an official watchface! Simple as that.
Click to expand...
Click to collapse
Same problem with GTS watch face
EJIS said:
hello, i was changing the watchfaces for cutom ones, and after trying one, the GTS was freezed in succesfull synced or installed watchface, i dont remember the message, is the one after change the watchface in the app amazfit. well after that i decide to tunr off it pressing the bottom, i restarted it and after the animation message off amazfit it was black. after being black and not response during like 30s its restart itself, and that in loop. restart, aniamtin, black, restart, aniamtion, etc..... pls someone know how to fix it???? i tried to charge it and its charges prefect, its appears the anaimation of charging etc, but the problem is taht, is in bootlloop xd. pls someone who know who to fix it answer me pls :crying::crying::crying::crying:
Click to expand...
Click to collapse
I has the same issue and fixed it by throwing it on the charge and changing the watch face through the Amazfit app.
Amazfit GTR 47 mm Boot Loop Error
Hey Guys!
I have encountered same problem many times. The reason behind this error is incompatible 3rd party watch faces. Don't worry I have the solution as well. Follow below steps and you are good to go.
1. Connect your watch to the charger.
2. Open the app and connect the watch.
3. After successful connection please select the smallest watch face.
4. Install the selected watch face on your Amazfit GTR 47 mm.
5. After installing the watch face, your watch is alive again.
Imran Nazir
i too have experienced same problem. amazefit logo is not going from the screen even on after putting it on charge the amazefit logo is not disappearing from the screen. please someone help me out
@imran___nazir said:
Hey Guys!
I have encountered same problem many times. The reason behind this error is incompatible 3rd party watch faces. Don't worry I have the solution as well. Follow below steps and you are good to go.
1. Connect your watch to the charger.
2. Open the app and connect the watch.
3. After successful connection please select the smallest watch face.
4. Install the selected watch face on your Amazfit GTR 47 mm.
5. After installing the watch face, your watch is alive again.
Imran Nazir
Click to expand...
Click to collapse
Buddy, this is absolutely senseless))) How you can connect watch to app if watch constantly in bootloop mode?! You really think it is possible? ))
hello there, have a boot loop problem with Amazfit GTR-47 and somehow I uninstall the app so now I cant connect the watch to the application ...any suggestion, or I have to check hard durability.
Please any advice from someone who has solved the same problem.
here too. Gts infinity boot loop! help
EJIS said:
its fixed. for fix it, put to charge. go to amazfit app and change the watchface for one of the app and it fixed itself. use this if someone have this problem
Click to expand...
Click to collapse
Thankyou so much! worked on Amazfit X too
I have the same problem and nothing I do, makes the clock start.
May be you try this way:
1. You delete all bluetooth devices from phone
2. Install Zepp APP and open it.
3. Open your gps function in your phone
4. login or register Mi web account
5. Go to devices section in your Zepp APP
6. If there are any devices, delete it.
7. Than add new smart watch
8. Zepp APP finds your GTS device
9. Pair your GTS
10. Probably Zepp APP will upload new firmware
11. Thats all.
When the watch is stuck on amazfit logo, how should I connect the watch with the application, watch is still showing logo and application is stuck on connecting.
AbdullahManaz said:
May be you try this way:
1. You delete all bluetooth devices from phone
2. Install Zepp APP and open it.
3. Open your gps function in your phone
4. login or register Mi web account
5. Go to devices section in your Zepp APP
6. If there are any devices, delete it.
7. Than add new smart watch
8. Zepp APP finds your GTS device
9. Pair your GTS
10. Probably Zepp APP will upload new firmware
11. Thats all.
Click to expand...
Click to collapse
Then. I've tried all tips. I believe I need to rewrite the stock firmware. Has anyone tried?
The firmware is i guess corrupted and customer service of Amazfit is not responding.
dude...
do
farazhasan said:
When the watch is stuck on amazfit logo, how should I connect the watch with the application, watch is still showing logo and application is stuck on connecting.
Click to expand...
Click to collapse
you resolve the issue...
I'm facing the same
can you contact on mail,
[email protected]
farazhasan said:
The firmware is i guess corrupted and customer service of Amazfit is not responding.
Click to expand...
Click to collapse
dude,
could you resolve the issue???
I'm facing the same issue, mine is Amazfit GTR 47mm
can you contact in mail
[email protected]