Finally guys wait is over here i am presenting twrp for doodle 4 its have been hard time....for us...but dont worry
Credits----
Dsbhai.
Version--3.0
Try & tell me about recovery.. Hit thanx as much u can
Link..new.......https://drive.google.com/file/d/0BznFkza4EFpLem5sQ1FURXk3Q3M/view?usp=docslist_api (working)
I tried this but it not working.......
Pranz... said:
I tried this but it not working.......
Click to expand...
Click to collapse
Whats the problem occurs
Sadly when I rebooted into recovery I was welcomed with a black screen its a brick of some kind I think the recovery is not compatible so long story short I am stuck how do I go back to my previous recovery or can you guys provide me with a compatible recovery image.
Pranz... said:
Sadly when I rebooted into recovery I was welcomed with a black screen its a brick of some kind I think the recovery is not compatible so long story short I am stuck how do I go back to my previous recovery or can you guys provide me with a compatible recovery image.
Click to expand...
Click to collapse
We will re working ong on recovery till then u should flash stock recovery
Pranz... said:
Sadly when I rebooted into recovery I was welcomed with a black screen its a brick of some kind I think the recovery is not compatible so long story short I am stuck how do I go back to my previous recovery or can you guys provide me with a compatible recovery image.
Click to expand...
Click to collapse
Problem is fixed u can try now
Same problem has been occurred......
Pranz... said:
Same problem has been occurred......
Click to expand...
Click to collapse
Wait till 1 april I will surely give u recovery
sir
Its 2 April... wen we can expect custom recovery for q931...
Waiting eagerly for it....
siddtejas said:
Its 2 April... wen we can expect custom recovery for q931...
Waiting eagerly for it....
Click to expand...
Click to collapse
Working very hard for it will provide u tomorrow 100℅
super thanks sir...
dsbhai said:
Working very hard for it will provide u tomorrow 100℅
Click to expand...
Click to collapse
May ur hard work gets 1000% successful...
Thank You.. :good:
Guys pls provide me ur system in zip extension so that i can can complete my work... sorry for delay busy in pmt examinations....
Done twrp 3.0 new with no bugs
dsbhai said:
Done twrp 3.0 new with no bugs
Click to expand...
Click to collapse
Bravoo....... Kudos To You..... Can U share the file
siddtejas said:
Bravoo....... Kudos To You..... Can U share the file
Click to expand...
Click to collapse
Cilck on link and flash it with rashr
https://drive.google.com/file/d/0BznFkza4EFpLem5sQ1FURXk3Q3M/view?usp=docslist_api
Great work DSBHAI
Just found the below post:
http://forum.xda-developers.com/and...-doodle-4-twrp-recovery-t3366938/post66565022
Who is the actual developer ? Awesome work by the Original Developer.
thanks DSBHAI, for bumping the topic, had been waiting for a Custom Recovery for the Q391 since December 2015.
the custom recovery works, only through RASHR and not through SPFlash TOOLS.
(Can you please create a RECOVERY.IMG file to flash via SPFlash TOOLS ?)
Will ROMs or KERNELs follow ??
raptordynamics said:
Just joined the forum to thank DSBHAI, had been waiting for a Custom Recovery for the Q391 since December 2015.
the custom recovery works, only through RASHR and not through SPTOOLS.
(Can you please create a RECOVERY.IMG file to flash via SPTOOLS ?)
Awesome work bro.
Will ROMs or KERNELs follow ??
Click to expand...
Click to collapse
Will inform u as soon i finish it...
dsbhai said:
Will inform u as soon i finish it...
Click to expand...
Click to collapse
working man thnx for recovery now start porting a ROM
[email protected] said:
working man thnx for recovery now start porting a ROM
Click to expand...
Click to collapse
Yup.... i tried temasek unofficial rom but it didnt boot up their is some problem with kernel as soon i finish it i will upload it...☺☺
raptordynamics said:
Just found the below post:
http://forum.xda-developers.com/and...-doodle-4-twrp-recovery-t3366938/post66565022
Who is the actual developer ? Awesome work by the Original Developer.
thanks DSBHAI, for bumping the topic, had been waiting for a Custom Recovery for the Q391 since December 2015.
the custom recovery works, only through RASHR and not through SPFlash TOOLS.
(Can you please create a RECOVERY.IMG file to flash via SPFlash TOOLS ?)
Will ROMs or KERNELs follow ??
Click to expand...
Click to collapse
wow cool thier is a bump of my project i will report it....my project is older than this but dont worry i will prove it.. first of all tried to port temasek unofficial rom when it is not turning on then i asked for help in other threads
Related
well i wanna know if our device support those mobile odin? i don't have pc right now. so, if i my star support those mobile odin i can flash recovery key combo fix directly from my device. so that i will be able to tweak my star without worrying of messing it.. well im so excited to use mobile odin if supported... anyone who had test please tell me
kima09 said:
well i wanna know if our device support those mobile odin? i don't have pc right now. so, if i my star support those mobile odin i can flash recovery key combo fix directly from my device. so that i will be able to tweak my star without worrying of messing it.. well im so excited to use mobile odin if supported... anyone who had test please tell me
Click to expand...
Click to collapse
maybe... but i don;t know about it..
but if you only want to flash already recovery key combo fix and have cwm installed and is rooted.. i may provide you with cwm flashable fix..
psych.half said:
maybe... but i don;t know about it..
but if you only want to flash already recovery key combo fix and have cwm installed and is rooted.. i may provide you with cwm flashable fix..
Click to expand...
Click to collapse
Its made by chainfire so it will most probably work
psych.half said:
maybe... but i don;t know about it..
but if you only want to flash already recovery key combo fix and have cwm installed and is rooted.. i may provide you with cwm flashable fix..
Click to expand...
Click to collapse
yeah my phone is already rooted and have cwm install. if you could provide me flashable zip, it would be sooo great....
yea thank you in advance
T3snake said:
Its made by chainfire so it will most probably work
Click to expand...
Click to collapse
i think it will just say "Device not supported" or something like that.. :|
kima09 said:
yeah my phone is already rooted and have cwm install. if you could provide me flashable zip, it would be sooo great....
yea thank you in advance
Click to expand...
Click to collapse
i will upload to the same fix thread in general section.. will ya test it.?. O__O
Buddy, Mobile Odin is not supported for our s5282, but u can test it by downloading apk from google.com , if it works then post here
psych.half said:
i think it will just say "Device not supported" or something like that.. :|
i will upload to the same fix thread in general section.. will ya test it.?. O__O
Click to expand...
Click to collapse
yeah sure... i had tested the first fix post but not working. i think that odin flashable file will be better than the first one. which need to flash as bootloader...
ill test your file if you upload
kima09 said:
yeah sure... i had tested the first fix post but not working. i think that odin flashable file will be better than the first one. which need to flash as bootloader...
ill test your file if you upload
Click to expand...
Click to collapse
you mean in the orginal dev thread? that is same as stock.. infact it doesn't even have init.d support.. >_>
okay.. uploading it right now.. do test and report.. check my thread in the General section
psych.half said:
you mean in the orginal dev thread? that is same as stock.. infact it doesn't even have init.d support.. >_>
okay.. uploading it right now.. do test and report.. check my thread in the General section
Click to expand...
Click to collapse
yeah, just test it. it works perfectly..oh, i can't say how thankful i am to you.....
Sorry @suhas.holla posting this on new thread you locked yours thread but I found fix regarding yours miui v6 ROM reboots issue
we are following wrong procedure.
We need to use cwm recovery to flash ROM
My ROM details before flashing:-
I'm on stock ROM with thunderzap kernel and cwm custom recovery flashed.
updated
we need to follow following procedure:-
1) boot on cwm recovery.
2)factory wipe/reset.
3)then goto mount and storage option.
4)then mount everything except system and ext sdcard format the only system. (Updated step reported by @furiouskid )
5)Then flash miuiv6 ROM by suhas.Reboot
6)then option came rom will flash stock recovery when boot select No.
It will boot surely
If ROM boots then flash gapps I used Paco version
I'm attaching screenshot below of my working rom
please feedback below or PM the developer
updated
help
can u explain 7th point again???
and formatting system will wipe all data ryt???
Dev has done really appreciable work by develiping MIUI V6 but he should not close the thread and should use negative comments as knowledge enhancer!
sanjeev7 said:
can u explain 7th point again???
and formatting system will wipe all data ryt???
Click to expand...
Click to collapse
Yeap bro
first take backup of current ROM bro
7 step display when u reboot system after all step done.
just click yes disable it
formatting system will wipe all system partition data.
DGEEEK said:
Yeap bro
first take backup of current ROM bro
7 step display when u reboot system after all step done.
just click yes disable it
formatting system will wipe all system partition data.
Click to expand...
Click to collapse
This method is not working.....I m not able to install rom wen system is UNMOUNTED.....m getting status 7 error
and wen i try mounting....i was able to flash...but RANDOM REBOOTS AGAIN.....so request someone to try...if not working please remove this thread
working for me.... nice rom :victory:
sanjeev7 said:
This method is not working.....I m not able to install rom wen system is UNMOUNTED.....m getting status 7 error
and wen i try mounting....i was able to flash...but RANDOM REBOOTS AGAIN.....so request someone to try...if not working please remove this thread
Click to expand...
Click to collapse
Bro don't know what is happening but I successfully flashed apply ios8 theme quite a stable rom.thanks for feedback
I attached some pictures of working rom
DGEEEK said:
Bro don't know what is happening but I successfully flashed apply ios8 theme quite a stable rom.thanks for feedback
I attached some pictures of working rom
Click to expand...
Click to collapse
This may sound weird...but PLEASE TRY PUTTING SIM CARD...the ROM may not work......as m back to my previous ROM i cant check
sanjeev7 said:
This may sound weird...but PLEASE TRY PUTTING SIM CARD...the ROM may not work......as m back to my previous ROM i cant check
Click to expand...
Click to collapse
am not sure what's the logic behind this. I did a system wipe on twrp itself and tried flashing but there was no difference. So it looks like not a partition or recovery issue as long as flashing is successful.
sanjeev7 said:
This may sound weird...but PLEASE TRY PUTTING SIM CARD...the ROM may not work......as m back to my previous ROM i cant check
Click to expand...
Click to collapse
Look out below pictures bro..
There is No issue after putting Sim card if you thinking modem is the problem you are wrong brother.
Use only cwm recovery.
DGEEEK said:
Look out below pictures bro..
There is No issue after putting Sim card if you thinking modem is the problem you are wrong brother.
Use only cwm recovery.
Click to expand...
Click to collapse
Can you pls try and create a flashable nandroid backup zip for system and boot partition? if that's feasible.
Tried your method step by step more than 4 times still no luck...phone is rebooting after 9-10sec like before.
DGEEEK said:
Look out below pictures bro..
There is No issue after putting Sim card if you thinking modem is the problem you are wrong brother.
Use only cwm recovery.
Click to expand...
Click to collapse
if possible take a nandroid backup and share
baseband
DGEEEK said:
Look out below pictures bro..
There is No issue after putting Sim card if you thinking modem is the problem you are wrong brother.
Use only cwm recovery.
Click to expand...
Click to collapse
bro could you plz confirm on witch baseband u r on.
and have u inserted memmory card
shomil49 said:
bro could you plz confirm on witch baseband u r on.
and have u inserted memmory card
Click to expand...
Click to collapse
sanjeev7 said:
if possible take a nandroid backup and share
Click to expand...
Click to collapse
i don't have any permission from developer bro sorry
he is working on it..
shomil49 said:
bro could you plz confirm on witch baseband u r on.
and have u inserted memmory card
Click to expand...
Click to collapse
im using the modem/baseband of 28 jan version which is came with incremental update
sanjeev7 said:
if possible take a nandroid backup and share
Click to expand...
Click to collapse
i don't have any permission from developer bro sorry
he is working on it..
Use this cwm recovery
I FLASHED 5 TIMES EVERY TIME IT WORKS
PLEASE USE THIS RECOVERY GIVE A TRY AND REPLY http://d-h.st/OCLu
@freakzapster @Akhilendra Gadde @spikywits @sanjeev7 @furiouskid
DGEEEK said:
I FLASHED 5 TIMES EVERY TIME IT WORKS
PLEASE USE THIS RECOVERY GIVE A TRY AND REPLY http://d-h.st/OCLu
@freakzapster @Akhilendra Gadde @spikywits @sanjeev7 @furiouskid
Click to expand...
Click to collapse
Bro I was on cwm recovery when I flashed the ROM as you explained in op.
But not working for me.
Sent from my AO5510 using XDA Free mobile app
Appreciated :thumbup:
Sent from my AO5510
blackyz said:
Appreciated :thumbup:
Sent from my AO5510
Click to expand...
Click to collapse
Worked for u???
---------- Post added at 01:13 PM ---------- Previous post was at 01:06 PM ----------
DGEEEK said:
I FLASHED 5 TIMES EVERY TIME IT WORKS
PLEASE USE THIS RECOVERY GIVE A TRY AND REPLY http://d-h.st/OCLu
@freakzapster @Akhilendra Gadde @spikywits @sanjeev7 @furiouskid
Click to expand...
Click to collapse
Can u check once again about the mount / unmount which u mentioned on OP is correct o not .
Tried with the recovery which u gave,,,,,no solution
Hi
I'm tired of searching working custom Recovery for Micromax Canvas juice 2 aq5001.........So i'm starting this thread to let the developers know this and port a working custom recovery for this phone........
I searched for it on xda and what i got is carliv touch recovery based on cwm developed by @beingtejas sir.....but this is not fully working.....and the google drive link on it also not working......
So, please if anyone have a working recovery kindly post it here so that this noob(me) can do some development on my phone
Thank You
A big sorry for let you waiting. I lost my xda password and mail-id by mistake
Shikhar_Singh said:
Hi
I'm tired of searching working custom Recovery for Micromax Canvas juice 2 aq5001.........So i'm starting this thread to let the developers know this and port a working custom recovery for this phone........
I searched for it on xda and what i got is carliv touch recovery based on cwm developed by @beingtejas sir.....but this is not fully working.....and the google drive link on it also not working......
So, please if anyone have a working recovery kindly post it here so that this noob(me) can do some development on my phone
Thank You
Click to expand...
Click to collapse
Did you got it or you still need , by the way there are twrp available on google if you search
It's been a long day reply to this sorry
Already got it .
Thank you
Shikhar_Singh said:
It's been a long day reply to this sorry
Already got it .
Thank you
Click to expand...
Click to collapse
Can you share me a link to it? And suggest me some good ROMs ? Thanks in Advance
Many roms available already
adityadtr said:
Can you share me a link to it? And suggest me some good ROMs ? Thanks in Advance
Click to expand...
Click to collapse
Hey ,
Now there are enough ROMS available for this device ,
Even Nougat roms are available.
Just google it or you want the link ?
Shikhar_Singh said:
Hey ,
Now there are enough ROMS available for this device ,
Even Nougat roms are available.
Just google it or you want the link ?
Click to expand...
Click to collapse
r u sure for that?
Leon1d said:
r u sure for that?
Click to expand...
Click to collapse
Yes bro
Shikhar_Singh said:
Hey ,
Now there are enough ROMS available for this device ,
Even Nougat roms are available.
Just google it or you want the link ?
Click to expand...
Click to collapse
Yes Please give me link
adityadtr said:
Yes Please give me link
Click to expand...
Click to collapse
Here is the TWRP(Team Win Recovery Project)img link for your device which comes with OTG support & many more features,
http://www.mediafire.com/file/cvidvi...y_Hanuma40.img
adityadtr said:
Yes Please give me link
Click to expand...
Click to collapse
Here you go -
https://www.google.com/amp/s/custom...17/05/10/all-custom-rom-links-for-aq5001/amp/
Please lock the thread.
Yeh I can see how the C4 folder could cause such a lot problems for C5 owners :laugh:
If it works on the 5.1 then it will work on 6.0 (Rooted) It will never boot on the 6.0 Stock.
Sony ROM's don't do kernel version checking like the standard Mediatek ROM's do.
"Other Stuff" :laugh:
bigrammy said:
Yeh I can see how the C4 folder could cause such a lot problems for C5 owners :laugh:
If it works on the 5.1 then it will work on 6.0 (Rooted) It will never boot on the 6.0 Stock.
Sony ROM's don't do kernel version checking like the standard Mediatek ROM's do.
"Other Stuff" :laugh:
Click to expand...
Click to collapse
Gonna do kernel change in boot and then upload later i was using urs then i was using this :laugh:
gsser said:
Gonna do kernel change in boot and then upload later i was using urs then i was using this :laugh:
Click to expand...
Click to collapse
That's what I am saying, you do not need to do any kernel change it will still work.
bigrammy said:
That's what I am saying, you do not need to do any kernel change it will still work.
Click to expand...
Click to collapse
Yep it worked
Its not like your twrp port has problems, but its kinda annoying to me saving files into c4 dir and new ui looks lovely to me
yoho :fingers-crossed: lol hehe
the new one will be TWRP 3.0.2-7
This is a test kernel compiled if anyone can test please do test it Drive
This is a zImage or boot.img-kernel you need to unpack your boot.img and repackwith this
EDIT: TESTED IT HAS BUG
Friends, why does not this recovery run on android 6.0? https://drive.google.com/file/d/0BzygkfkwTgZ-d2xwTTdlR2NfSlE/view
gsser said:
Here is the newer twrp recovery, for 5.1 or 6.0 if you use @bigrammy s recovery, taking backups saves it to c4 folder. This will save as c5 with a brand new ui
WARNING
Your previous backups will not work if you flash this. You need to backup again.
Flash it from image as recovery
Credits:
@bigrammy for unlocking bootloader and other stuff
@sandeep.sethi for porting and fixing the recovey
5.1 and 6.0--->Drive (Tested-E5553)
Try at your own risk.
People can use this port in their work nor threads but just give credits.. Its just for respect..
Click to expand...
Click to collapse
thank in first but pls upload file again pls the link is down
Google drive link is dead
Google drive link is dead , is there anywhere else to download this tool?
Thanks!
Followup: I found several recovery images on the net, NONE of them work with Android 6.
gsser said:
Here is the newer twrp recovery, for 5.1 or 6.0 if you use @bigrammy s recovery, taking backups saves it to c4 folder. This will save as c5 with a brand new ui
WARNING
Your previous backups will not work if you flash this. You need to backup again.
Flash it from image as recovery
Credits:
@bigrammy for unlocking bootloader and other stuff
@sandeep.sethi for porting and fixing the recovey
5.1 and 6.0--->Drive (Tested-E5553)
Try at your own risk.
People can use this port in their work nor threads but just give credits.. Its just for respect..
Click to expand...
Click to collapse
thank in first but pls upload file again pls the link is down any one there
basherx444 said:
thank in first but pls upload file again pls the link is down any one there
Click to expand...
Click to collapse
its been 1 year, not even saying about appreciating the work, also dont have the files
Welcome
Today i present my ported recovery for Fire 2 lte i will share with you friends
I port it from Innjoo 2 lte Phone
First
Link of Download : http://www.mediafire.com/file/8gwbn643wy67g6c/recovery.img
Instructions
- Copy the download recovery.img to your internal memory
- Download kingroot and install it
- Root your device with kingroot
- install Rashr Application Link : https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools&hl=en
- First make a backup for your Recovery and then Flash the New Recovery
- Reboot to recovery Mode
- Enjoy
Tested Phones
-Innjoo Fire 2 Lte 2+16 (16GB ROM+2GB RAM)
IF you Like my work Press thanks and donate If you can
Credit
- Mediatek Phones
- MohammadEmbaby for his Twrp
soon it will be cm12.1 for this device
what useful
usefulWhy it should be useful if installed custom recovery and still no custom roms! !anyways thanks
boldheart0070 said:
usefulWhy it should be useful if installed custom recovery and still no custom roms! !anyways thanks
Click to expand...
Click to collapse
i manage to port cm12.1 but i need to fix some bugs
SO Stay tune
Shadow Of Leaf said:
i manage to port cm12.1 but i need to fix some bugs
SO Stay tune
Click to expand...
Click to collapse
Hope you do it quick
Good LUck
Any news about cm12.1 rom. :fingers-crossed:
Help MT6797 Innjoo Pro 2
Hello
I have purchased Innjoo pro 2 MT6797 but I cannot root it I am in bad luck.
Could you help me to make a custom recovery for my phone MT6797 Innjoo Pro 2.
I tried your ways but it seems not working in my phone and that because after successful flashing using SP flash tool it goes back to the factory recovery. like nothing happened.
also I cannot use bootloader because my phone is locked, and I couldn't find any way to unlock it. I cannot press volum up for "yes" to confirm the unlocking.
I appreciate in advance for your kind support
majedtech said:
Hello
I have purchased Innjoo pro 2 MT6797 but I cannot root it I am in bad luck.
Could you help me to make a custom recovery for my phone MT6797 Innjoo Pro 2.
I tried your ways but it seems not working in my phone and that because after successful flashing using SP flash tool it goes back to the factory recovery. like nothing happened.
also I cannot use bootloader because my phone is locked, and I couldn't find any way to unlock it. I cannot press volum up for "yes" to confirm the unlocking.
I appreciate in advance for your kind support
Click to expand...
Click to collapse
hello im glad to help
send me stock recovery.img to port a twrp for you ok
and as far as i know mediatek doesnt lock his bootloader weirdo
mirozeman said:
Any news about cm12.1 rom. :fingers-crossed:
Click to expand...
Click to collapse
i didn't find any mt6735 cm12.1 32bit support stable so i don't have any attend to port a bugged rom
Shadow Of Leaf said:
hello im glad to help
send me stock recovery.img to port a twrp for you ok
and as far as i know mediatek doesnt lock his bootloader weirdo
Click to expand...
Click to collapse
Thank you very much I appreciated
Really weird bro, when I try to execute the command on ADB "fastboot oem unlock" it gave me a manufacture warning for the unlocking and the choices are select yes to confirm or no doing it by pressing up or down volume, however, when I select yes by pressing up volume no response but when I press no it send me back to the recovery mode.
Something else, is when I try to flash the custom recovery from ADB, its give me a message that my device is locked.
Also, when I try to flash the custom recovery from "SP flash tool" it works, but I cannot boot to the custom recovery its like the OS refusing the flashed image and replace it with the factory one.
I have sent you privet message with the link of my public folder in google drive that contain the official recovery file, but its MT6757 not what I mentioned in the previous post
I couldn't post it here because I am still new in the forum.
majedtech said:
Thank you very much I appreciated
Really weird bro, when I try to execute the command on ADB "fastboot oem unlock" it gave me a manufacture warning for the unlocking and the choices are select yes to confirm or no doing it by pressing up or down volume, however, when I select yes by pressing up volume no response but when I press no it send me back to the recovery mode.
Something else, is when I try to flash the custom recovery from ADB, its give me a message that my device is locked.
Also, when I try to flash the custom recovery from "SP flash tool" it works, but I cannot boot to the custom recovery its like the OS refusing the flashed image and replace it with the factory one.
I have sent you privet message with the link of my public folder in google drive that contain the official recovery file, but its MT6757 not what I mentioned in the previous post
I couldn't post it here because I am still new in the forum.
Click to expand...
Click to collapse
ok thanks when i finish porting recovery
i will send you a link
Shadow Of Leaf said:
ok thanks when i finish porting recovery
i will send you a link
Click to expand...
Click to collapse
You have missed the link in your privet message
Mistake
majedtech said:
You have missed the link in your privet message
Click to expand...
Click to collapse
Hahahha im sorry i forgot to send you the link
this is the link http://www.mediafire.com/file/zw6dt6h6cdglkq1/TWRP+for+Innjoo+2+PRO.rar
sorry again hahahaha
Shadow Of Leaf said:
Hahahha im sorry i forgot to send you the link
this is the link http://www.mediafire.com/file/zw6dt6h6cdglkq1/TWRP+for+Innjoo+2+PRO.rar
sorry again hahahaha
Click to expand...
Click to collapse
Thank you Man
Its booted to the customer recovery, but I have problem the touch screen not responding I cannot swipe or do anything!!!!
majedtech said:
Thank you Man
Its booted to the customer recovery, but I have problem the touch screen not responding I cannot swipe or do anything!!!!
Click to expand...
Click to collapse
Weird touchscreen not working
let me do some changes and give you another recovery port
Shadow Of Leaf said:
Weird touchscreen not working
let me do some changes and give you another recovery port
Click to expand...
Click to collapse
Thanks bro
Just FYI, I have read in the web that there is same issue with some phones using TWRP V 3.0.3.
I am waiting for you .....
majedtech said:
Thanks bro
Just FYI, I have read in the web that there is same issue with some phones using TWRP V 3.0.3.
I am waiting for you .....
Click to expand...
Click to collapse
here it is http://www.mediafire.com/file/zw6dt6h6cdglkq1/TWRP+for+Innjoo+2+PRO.rar
try this
Shadow Of Leaf said:
here it is http://www.mediafire.com/file/zw6dt6h6cdglkq1/TWRP+for+Innjoo+2+PRO.rar
try this
Click to expand...
Click to collapse
The file you gave me not booting to the custom recovery, its keep looping .
The first file you provided me yesterday is booting but no .
Shadow Of Leaf said:
i didn't find any mt6735 cm12.1 32bit support stable so i don't have any attend to port a bugged rom
Click to expand...
Click to collapse
Yeaaahh Finally I port Mokee Os Stable for Our phone
see Screenshots in attachements
majedtech said:
The file you gave me not booting to the custom recovery, its keep looping .
The first file you provided me yesterday is booting but no .
Click to expand...
Click to collapse
Im sorry to not answer you i didnt find a twrp for mt6757 to port it
I will try to port mt6753 twrp for you ok
Sorry again