Someone please post How to flash infocus m2 3g mobile...
I am stuck in bootloop...
I cannot goto recovery mode... because i flashed it with CWM from(find the link in text file in attachment) using mobileuncleTools.apk(both are available in attachments)...after this only I got this problem...
I can only getinto Fastboot mode only...(tried with combination of Vol+ and Power Button while putting the usb cable)
I tried with Vol- & Power button combination... Still BootLoop
I tried SP FlashTool but always says timeout....
Its a Locked Bootloader so cannot flash anything via fastboot mode...It always says "Security Deny - Err:0x2017"
and I tried to Unlock Bootloader by Entering command "Fastboot -i 0x0489 oem unlock"... its also failed and result is "Unknow Command"
Please some on Tell me How to Entirely Flash with Locked Bootloader.......
HI
TigerDhana017 said:
Someone please post How to flash infocus m2 3g mobile...
I am stuck in bootloop...
I cannot goto recovery mode... because i flashed it with CWM from(find the link in text file in attachment) using mobileuncleTools.apk(both are available in attachments)...after this only I got this problem...
I can only getinto Fastboot mode only...(tried with combination of Vol+ and Power Button while putting the usb cable)
I tried with Vol- & Power button combination... Still BootLoop
I tried SP FlashTool but always says timeout....
Its a Locked Bootloader so cannot flash anything via fastboot mode...It always says "Security Deny - Err:0x2017"
and I tried to Unlock Bootloader by Entering command "Fastboot -i 0x0489 oem unlock"... its also failed and result is "Unknow Command"
Please some on Tell me How to Entirely Flash with Locked Bootloader.......
Click to expand...
Click to collapse
Link gives CMW recovery for Infocus M2 ..not for 3g
of course infocus m2 3g is factory locked bootloader...so u cant flash recoveries
wait any unlocker
hi vivek has ur problem with m2 being solved?
hi all
thanx to all of u guys at xda i was able to get my infocus working again.here's what i did:-
1) downloaded stock ROM from needrom.com the one m mentioning here by the name @"LSO-2260-0-00WW-A02-update"
2) transfer it in the root of SD Card.
3)get into recovery mode,power hold alongwith volume increase and USB attached to PC.
4) The moing ment INFOCUS logo comes up leave the power buttton.
5)keep the volume increase pressed untill recovery screen pops up(you'll be able to make out it's recovery coz of the deceased android logo with exclamation mark in it's chest) or the screen changes color,if nothing comes written on the screen after recovery screen comes( ie the deceased android logo with exclamation mark in it's chest) plz press the power button
6)recovery menu will definitely pop up.
7) select install from SD card.
8) select the zip file from the drop down menu and install.
9) reboot then and wait it''l set up the way it sets up for the first time.
10) mind it it was for the INFOCUS M2 3G INDIA version
rgds n once again thanx.
it says the scatter file is missing.what to do?
gauravinvouge said:
hi all
thanx to all of u guys at xda i was able to get my infocus working again.here's what i did:-
1) downloaded stock ROM from needrom.com the one m mentioning here by the name @"LSO-2260-0-00WW-A02-update"
2) transfer it in the root of SD Card.
3)get into recovery mode,power hold alongwith volume increase and USB attached to PC.
4) The moing ment INFOCUS logo comes up leave the power buttton.
5)keep the volume increase pressed untill recovery screen pops up(you'll be able to make out it's recovery coz of the deceased android logo with exclamation mark in it's chest) or the screen changes color,if nothing comes written on the screen after recovery screen comes( ie the deceased android logo with exclamation mark in it's chest) plz press the power button
6)recovery menu will definitely pop up.
7) select install from SD card.
8) select the zip file from the drop down menu and install.
9) reboot then and wait it''l set up the way it sets up for the first time.
10) mind it it was for the INFOCUS M2 3G INDIA version
rgds n once again thanx.
Click to expand...
Click to collapse
I downloaded the LSO-2260-0-00WW-A02-update from serioushackguid4u.blogspot.com for my Indian version.but it says the scatter file is missing.what should I do now?please send me the link
.
Bro...i rooted my Infocus M350 and then i ran a ota update..but atlast i get an error..then my phone was in bootloop..
then i installed cwm recovery mode through fastboot mode and flashes the stock rom(dwnloded from xda's site) and then lollipopupdate.zip..
But samething happens..the bootlogo was according to lollipopupdate.zip but still i was in a bootloop..then i reflashes the stock(kitkat.zip) and when i rebooted my phone then there was a lighted black screen with no symbols and no logo...but it is connecting to pc and fastboot mode can be accessed but android screen is blackened with nothing showing...plz help..i m in a big trouble and Thanks in Advance
Sent from my GT-S7582 using XDA Free mobile app
What help u need
my infocus m2 during a update getting error and now when i switch on the phone then the sign of infocus view and then after showing that sign its again swich off
please help what can i do .....
reply must
recovery mode 'no command''
Bro i have Infocus m2 3g version . I forgot my password then i was go to the recovery mode there are show's 'no command' pls help me thanxx in advance
krtbc11 said:
Bro i have Infocus m2 3g version . I forgot my password then i was go to the recovery mode there are show's 'no command' pls help me thanxx in advance
Click to expand...
Click to collapse
User mobile is cwm no comment found show on logo just press volume up button and down button press it two time your phone opended on cwm recovery
Is there is any way to update infocus m2 3g in a latest android version?????
plzz answer soon.
Hi guys. Please help me. . My m2 3g is already rooted. Then i download Software update lastnight. I install it but error. Then after a few minutes. My m2 is stuck in a logo and no command. I don't have a backup... I already tried to fix it in my pc. But not connected. Please help me. (sorry for my bad english) need help guys.
its showing invalid ota missing sctter file installation aborted error
what should i do please help me
i am also facing same problem so plzzz send me that zip file or link for infocus m2 3g on my mail id "[email protected]" plzzz
[/YOUTUBE]
TigerDhana017 said:
Someone please post How to flash infocus m2 3g mobile...
I am stuck in bootloop...
I cannot goto recovery mode... because i flashed it with CWM from(find the link in text file in attachment) using mobileuncleTools.apk(both are available in attachments)...after this only I got this problem...
I can only getinto Fastboot mode only...(tried with combination of Vol+ and Power Button while putting the usb cable)
I tried with Vol- & Power button combination... Still BootLoop
I tried SP FlashTool but always says timeout....
Its a Locked Bootloader so cannot flash anything via fastboot mode...It always says "Security Deny - Err:0x2017"
and I tried to Unlock Bootloader by Entering command "Fastboot -i 0x0489 oem unlock"... its also failed and result is "Unknow Command"
Please some on Tell me How to Entirely Flash with Locked Bootloader.......
Click to expand...
Click to collapse
how to stop adds on infocus m2 3g as i am getting frequently on browsing on wifi
{reopen} infocus m2 4g need help
fastboot solution please.
fastboot boot cwm.img commang works but my device's bootloader stucks as it is showing download mode at left corner.
when i hold power button it simply restarts.
it isnt because of, i tried to flash that custom recovery .but my device is not permanantly flashable.
at that time it bricked and goes to a qualcomm qdloader something driver state.
when i overcome that problem , now i unable to go to cwm again.
before the problem of qdloader qualcomm driver ,my device easily accepts the cwm img . now it wont.
sorry for bad english
i recently rooted my moto e but when i tried to install a rom it failed...now the biggest problem is that i cant seem to get to my recovery mode since there is no rom...when its on its stuck on the bootloader page. "warning your bootloader is unlocked " can someone plz help me get to the reccovery mode
prince11rahul10 said:
i recently rooted my moto e but when i tried to install a rom it failed...now the biggest problem is that i cant seem to get to my recovery mode since there is no rom...when its on its stuck on the bootloader page. "warning your bootloader is unlocked " can someone plz help me get to the reccovery mode
Click to expand...
Click to collapse
Do this... first turn on the phone.
The phone will show the Warning logo, and will keep on showing that.
Long press vol down and Power at the same time for a long time.... about 10 secs.... U'll enter the bootloader mode.
From there, flash TWRP, and do a full system wipe.
Install any ROM of ur choice.
Hope this helps.
Hello,
I have CM13 running on my Samsung Galaxy S4 and I installed SuperSu from the playstore (I know that was dumb).
The app told me that the SU binary has to be updated and as this failed, it recommended me to go into recovery and update it from there.
After that I was stuck on the boot animation.
I also can't boot into the custom recovery anymore. When I hold down POWER+VOLUME UP+HOME until I see the blue text saying "recovery booting" (or something like that) the phone restarts and starts to boot into CM again.
Do you guys have any ideas what I could do to solve this problem?
Greetings
Thomton
Restore your phone with Odin. CM13 is already rooted. On some versions, you have to enable it in Developer Options.
Thomton said:
Hello,
I have CM13 running on my Samsung Galaxy S4 and I installed SuperSu from the playstore (I know that was dumb).
The app told me that the SU binary has to be updated and as this failed, it recommended me to go into recovery and update it from there.
After that I was stuck on the boot animation.
I also can't boot into the custom recovery anymore. When I hold down POWER+VOLUME UP+HOME until I see the blue text saying "recovery booting" (or something like that) the phone restarts and starts to boot into CM again.
Do you guys have any ideas what I could do to solve this problem?
Greetings
Thomton
Click to expand...
Click to collapse
Install twrp by Odin .Back up data (only) by twrp.Flash cm 13 again .Restore ur data.
Thank you
Thank you guys for your help.
Hello guys,
my phone ( Xiaomi Redmi note 3 Pro ) is bootlooping after flashing SuperSU.
I am using Nitrogen OS 7.1 and stuck in the logo.
I readed about booting the phone into recovery by pressing Volume +/- with power button.
But my phone did not respond to them even after pressing for a long time.
I hope you guys can help me
EDIT : I can enter to TWRP now but can I just use UnSU script to remove the flashed SuperSU that made my phone bootloop to fix the problem or do I need to factory reset it?
A Q R I N said:
Hello guys,
my phone ( Xiaomi Redmi note 3 Pro ) is bootlooping after flashing SuperSU.
I am using Nitrogen OS 7.1 and stuck in the logo.
I readed about booting the phone into recovery by pressing Volume +/- with power button.
But my phone did not respond to them even after pressing for a long time.
I hope you guys can help me
EDIT : I can enter to TWRP now but can I just use UnSU script to remove the flashed SuperSU that made my phone bootloop to fix the problem or do I need to factory reset it?
Click to expand...
Click to collapse
wipe everything and flash rom again.
A Q R I N said:
Hello guys,
my phone ( Xiaomi Redmi note 3 Pro ) is bootlooping after flashing SuperSU.
I am using Nitrogen OS 7.1 and stuck in the logo.
I readed about booting the phone into recovery by pressing Volume +/- with power button.
But my phone did not respond to them even after pressing for a long time.
I hope you guys can help me
EDIT : I can enter to TWRP now but can I just use UnSU script to remove the flashed SuperSU that made my phone bootloop to fix the problem or do I need to factory reset it?
Click to expand...
Click to collapse
Why still using SU?, use Magisk.
pritamdutt said:
wipe everything and flash rom again.
Click to expand...
Click to collapse
Are there another ways without flashing everything from the start?
So today I was tring to root my Blackview S6 and I unlocked the bootloader but I think I installed incompatible CWM recovery and now I think it tries to automatically boot into recovery but I installed incompatible one. I tried holding power button, power and volume down button (every combination) and it still doesn't stop bootlooping. And my device has unremovable battery so I cant stop it from booting. And when its in the boot screen it says:
Orange state
Your device has been unlocked and can't be trusted
Your device will boot in 5 seconds
Thank you who will help me because I can't do anything now.:crying::crying:
EDIT: I know I need to clear data and cache but how do I do that?
This happens because when I unlocked bootloader I didn't reboot and instantly tried to flash custom recovery but I flashed an incompatible one so I don't have recovery and I don't know how to fix this.
I have the same problem
I have the same problem with my LeEco x620 , looking for help too, cannot do anything due to reboot every 5 second ..