Related
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Get a case.
Sent from my PG86100 using XDA App
e_town said:
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Click to expand...
Click to collapse
A high gloss polish would look too iphoney (2g/3g variants.)
And a brushed metal style would look too similar to LG line of current phones. In my opinion.
But.. To me. I like how roughed up metal looks. So, some worn paint, maybe some rust spots would look kinda bad ass to me. Lol.
Sent from my PG86100 using Tapatalk
novanosis85 said:
Get a case.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Thank you for adding value to this thread.
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Xencer said:
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Well thats the thing I have NEVER dropped my E3D and it has been in a Otterbox Defender since the day I bought it. I pulled it out to clean it and make sure there was no dust in there and I noticed the paint chips.
I am not kidding, use a sharpie marker, looks damn good.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I did but it doesn't stay... :|
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
hchavarria said:
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
Click to expand...
Click to collapse
Answer: No, it's not a problem, it's normal wear and tear.
OP, you could definitely try your idea. But in addition to that, I put any coins I have in my other pocket. Nothing goes in the same pocket as my 3D except maybe a piece of paper on occasion.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I've dropped my phone where the metal bezel has a scratch and now is bare. Using a sharpie marker works but the marker wears off after a while. I used a sharpie marker and then used a tpu case. The problem solved.....for now.
Jeremiah239 said:
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
Click to expand...
Click to collapse
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Noiro said:
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Click to expand...
Click to collapse
I do have OCD and I have had a Otterbox Defender on my phone since the day I bought it! So I think its gonna keep happening no matter what I do!
I'm still in my 30 days and I also have dust under the screen so I might get a replacement anyway.
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
I've got a small dot exposing the metal on mine. Its not that noticeable but just in case I now have a case on it.
Well as luck would have it I noticed something white on one of the corners of the phone do I rubbed it with my thumb and some of the black paint came off, same thing happened with the bottom corner. This phone is just 5 days old! I haven't had many of the problems manifest as discussed in other threads so I wouldn't want to return it but I am certainly contemplating it.
R2D2 631 said:
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
Click to expand...
Click to collapse
Yep it doesn't matter how careful you its gonna happen! Even with a case it happened to me then I took my case off for 3 days and another one showed up and I treat my phone like gold I am actually way over protective with it. I'm thinking of taking it back and getting the NS4G! I have dust under my screen now the paint is chipping and my rear speaker sounds like ****, I'm just scared the problems I have now are only gonna get worse.
Wow another problem. I too have paint chipping on the left side on the lower part by the screen. I rubbed it thinking it was dust and now it's silver. It also looks like the plating is slightly bent. And I also have a small white dot right under the sense on the metal part. Looked at my Shift and 4G and I see nothing like this and I used the hell out of those. As opposed this one, which is already a replacement for other issues.
Its 3 days old ffs. I've barely used it. Exchanging it is useless, its the build quality. It's going to happen to all EVO 3Ds sooner or later, even with a case and super care. Within a few months it will look like crap.
Oh well, I'm definitely returning this, but I'll do it after I have some fun with it. I hope the SGS2 has superior build quality, I think I can live without Sense from now on.
My wife has never dropped hers. But its bad. I dropped my phone once on some rocks. Small silver scratch on the face.
Sent from my PG86100 using XDA Premium App
I bought this white back for the phone to see what i could do with it. I took the letters off because they were not stuck on there good. They came off with a dust can.
Decided to paint it a sliver color to match the frame as close as possible. I hand painted the inside of the letters black. I don't know what to do about the "M" yet, if i'm going to put one on there or not. Maybe something else, idk.
This is what I have so far. It looks like it has a brushed look to it. After I painted it, I scuffed it with a dish scrubber to give it that look.
Last thing I do, will be spray a satin clear.
That thread title though.
Looks good.
I thought I was on p&*#hub for a second...
EmperorX said:
I thought I was on p&*#hub for a second...
Click to expand...
Click to collapse
lol
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
dcemtp1 said:
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
Click to expand...
Click to collapse
I'm going to see how this one holds up first. I have some ideas for other covers lol
just cleared it a bit ago. ended up using a matte clear. just going to let it dry really good and maybe polish it a lil before installing it.
looks pretty good
Would be nice to see it on your phone!
I like it
I just got around to installing it.
pics
Looks great
albert1500 said:
I just got around to installing it.
pics
Click to expand...
Click to collapse
I'd buy one from you if you decide to sell it
Definitely a cool option to have something unique like that.
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
literadesign said:
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I used rust-o-leum paint and clear. I'm not worried about the bending. I'm taking this one off in the next few days.
I started another one with a different silver. I wont be reusing the current one.
FYI they make paint for plastic (bendable) it's mostly for bumpers on cars
I took the cover off earlier and the paint held up very well, i didnt bend the cover a whole lot to begin... i wasnt going to use it again so i decided it to test how much bend it would take and i had to bend it a lot in order for the paint to wrinkle.
I tried doing something similar for my daughter that got bored by the same old phone sleeve/case that was partially clearly transparent and partially frosted look.
I decided to paint the frosted part using RAL 9005 matte black spray paint. I haven't clear coated it yet as it was just an experiment. If it turns out to be ok I may coast it using some not so rigid coat to avoid cracking due to the rubbery nature of this sleeve.
She likes the end result. Me too. Unfortunately I'm not able to add images to my posts (haven't posted enough posts to XDA - apparently)
images.tapatalk-cdn.com/15/04/23/2214dce5a324e57d152757f716f672b9.jpg
Sent from my Galaxy Nexus using Tapatalk
How did you stick the back cover back on?
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
lotus49 said:
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
Click to expand...
Click to collapse
Uuhm... i had thought the idea of seeing more than one back cover in some of the more recent photo's would have indicated it... but also in the first post he says he bought a white back cover a while ago to see what he could do with it. He didn't remove and replace the same back cover. Pretty sure that's NOT possible due to the adhesive... or at least risks the ability to put it back on firmly and smoothly.
This phone is tough I don't know why people are claiming it is bending or breaking easily.
Last night I dropped my phone from face height onto concrete. A loud bang as it hit the ground and the Sim card came flying out. I assumed it was dead.
Picked up the phone and no broken glass anywhere. Not even a scratch.
Popped the sim back in and it is working fine.
Only two little chips in the paint job on one corner of the phone from that brutal drop. Posted pics of the little cosmetic damage on top right of phone.
Tested camera and no issues. Can't believe this huge screen and the camera glass survived a five+ foot drop onto concrete in the rain!
Sorry photo quality is lacking. I had to use my wife's iPhone to take the pics
mine folded in half then did a back spin and blew up into a million pieces, this was after a lighter was put to the screen accidentally just before i dropped it
On a serious note, good to see that it can withstand a bit of damage! I have mine in a case and a glass screen protector so hopefully im covered
ant78 said:
mine folded in half then did a back spin and blew up into a million pieces, this was after a lighter was put to the screen accidentally just before i dropped it
On a serious note, good to see that it can withstand a bit of damage! I have mine in a case and a glass screen protector so hopefully im covered
Click to expand...
Click to collapse
You won ?????
Sent from my Nexus 6P using Tapatalk
nonnasmyladie said:
This phone is tough I don't know why people are claiming it is bending or breaking easily.
Click to expand...
Click to collapse
For the same reason you just claimed it's tough. There's lucky, unlucky, and somewhere in between. One thing I've learned about the internet is no one likes the middle option. Either the phone is durable, or the phone is trash, but never the middle. Things are assumed based on one event on either side of the spectrum.
That's good to see actually but I'm still too worried to use it without a case. It looks like it was a corner drop too, those are the worst!
Still rockin' that serial number sticker though... heh.
teknomar7 said:
Still rockin' that serial number sticker though... heh.
Click to expand...
Click to collapse
That's how you know it's real
I've dropped mine three times so far.
Twice onto carpet and once onto floorboards probably from about two feet each time.
Haven't got a mark..
Not saying its indestructible but its definitely not delicate
So you're telling me you dropped you phone and it didn't shatter the gorilla glass, or bent in half as a result.
This will surely drive those people freaking out about the quality of the build nuts. Lol
Sent from my LG-H815 using Tapatalk
I've dropped mine 3-4 times from 1m. Back glass has a crack in the middle now not visible very good but the glass panel in the back definetely splitted in 2. No influence on function and it holds in olace for now...
Gesendet von meinem Nexus 6P mit Tapatalk
I smell a conspiracy, I bet you're secretly being paid by Huawei and or Google to counteract all the recent bending & shattering hysteria ?
Sent from my Nexus 6P using Tapatalk
To be honest I really think it's media fueled hysteria. They should just check the numbers and statistics. If it's 1 in 10000 devices then it's just nohing...
Gesendet von meinem Nexus 6P mit Tapatalk
teknomar7 said:
Still rockin' that serial number sticker though... heh.
Click to expand...
Click to collapse
All the cool kids keep the stickers on the phone. It's like the nerd equivalent of keeping the sticker on your baseball hat.
you are in good luck, i will put on a case as soon as i get mine
But interwebs sez fone desentigrates on contakt.
I think since the front glass is recessed a bit it would take a big drop directly on the glass to shatter. So basically you have to be unlucky
I dropped mine yesterday onto the kitchen floor from at least 4 feet, probably higher. No damage at all, not even a scratch. I have a case and screen protector on order, but they haven't arrived yet.
It seems like I drop every phone I get before I can get a case on it.
midas69 said:
I dropped mine yesterday onto the kitchen floor from at least 4 feet, probably higher. No damage at all, not even a scratch. I have a case and screen protector on order, but they haven't arrived yet.
It seems like I drop every phone I get before I can get a case on it.
Click to expand...
Click to collapse
This happened to me once. I had a Nexus 5 and MotoX 2013. Was testing them to decide which I liked best. I was using the twist to launch feature showing off to some friends and the Moto slipped from my hands as I was saying something about how grippy it was. Little did I know, the case I ordered was delivered that day and was sitting in my mailbox. MotoX was fine just dinged on the corner.
Since then I've gotten all my cases before the phones arrived. My 6P. Hasn't been naked since I unboxed it. I just slide part of the case open when I sim swap lol
Sent from my Nexus 6P
Are you sure your gorilla glass 4 on your visor didnt spontaneously break right after? I mean right after you dropped it but then decided to place it on the table. When you walked away you didnt hear it crack on its own?
I bought a Nexus hoping that this device will last me for years to come.
But I am having doubts that if it will last long without a cover.
I decided not to put a cover on the phone just to make the phone always look good and not be one of those people who are always scared of getting scratches on their phone. However, just after 1 month of usage, the phone is literally having marks and scratches everywhere on the phone (including the visor) except the screen.
Even my 5 and 4 year old Samsung Galaxy 3 and Note 1 which never had a cover either don't have these many scratches, even today.
Why you let me down Huawei?
Is putting a cover the only option I have got?
Hi there,
I have my 6P for 10 months now with case 100% of the time.
Does it help? No.
When I take out the phone, I can see small scratches and dents. This is because some dust particles get in from time to time. This way when the case and the phone move a little touching each other, the surface of the phone is scratched.
It is disappointing.
I have my note 3 which haven't been in a case and it's more than 3 years old now, and does not have so many marks in the back.
This trend to make devices all metal is the dummest thing ever. At least they can put on some coating on the metal or something. :/
This is by far the most fragile phone I've ever had.
I've had mine since Nov 9th 2015. It's been in a case and a tempered glass screen protector since then. Just took it out and it's still mint. No scratches or anything. I also got the graphite.
Agreed, fragile AF!!!! LOL bent two of them in pocket without even doing anything extreme and i dont even wear jeans i wear comfy chinos. LOL so yeah got replacements for those.
TBH i've never seen anyone able to keep their phone in pristine condition with no case. granted they're probably more careful. But AFAIK, the moment they drop it there goes the phone. personally, I'm clumsy enough to warrant a case so i invested in a good Spigen one (see signature) and promptly dropped it on rough tarmac a week into ownership. I'd say if i had no case on, I'd have lost this phone.
Regarding your scratches on your phone, yes. This is aluminum. It's a soft metal. What are you expecting? Have you seen a pristine no case iPhone? This isn't really a "fault". A little bit of adjusting of expectations is in order. I personally like the polycarbonate that I had on my HTC one X of old. Even Samsung's plastic doesn't hold as well against the strength of polycarbonate.
Okay maybe 6p is not the toughest phone around, but comparing it with old samsung devices made of plastic is plain stupid. Its fricking aluminium, soft metal, show me one metal phone without scratches, i can assure you, you cant.
Better to have marks than totally broken phone. I dont use or even have case and I have dropped mine a few times and its not bad. A few marks here on the edges and there and tempered glass has saved the screen once. I have noticed I have much better luck with screens being ok after drops with aluminum phones than I had with plastic ones that always got broken screen when dropped even from low height.
I agree is a bit sensitive, a little flower if you wanna go there.
But it's our responsibility to keep it safe knowing this. I also wanted to use mine naked as it looks better and lighter this way, but it's so prone to on falling and hitting on something that I won't take the chance.
You can get good looking cases as well, Spigen for example looks good and protects it good.
Yeah kills a bit the aspect and gets slightly heavier, but it adds to protection and it's worth it.
Occasionally remove it and clean it to dust it off particles that enter occasionally.
shuckeru said:
TBH i've never seen anyone able to keep their phone in pristine condition with no case. granted they're probably more careful. But AFAIK, the moment they drop it there goes the phone. personally, I'm clumsy enough to warrant a case so i invested in a good Spigen one (see signature) and promptly dropped it on rough tarmac a week into ownership. I'd say if i had no case on, I'd have lost this phone.
Regarding your scratches on your phone, yes. This is aluminum. It's a soft metal. What are you expecting? Have you seen a pristine no case iPhone? This isn't really a "fault". A little bit of adjusting of expectations is in order. I personally like the polycarbonate that I had on my HTC one X of old. Even Samsung's plastic doesn't hold as well against the strength of polycarbonate.
Click to expand...
Click to collapse
True, but the old phones were quite sturdy, and by old I don't mean Nokia 3310, I mean Androids that came out till the 4.4 era.
Check out the photo of my attached I5800.
Not a single scratch on the screen, only the silver plating has come off.
[email protected] said:
True, but the old phones were quite sturdy, and by old I don't mean Nokia 3310, I mean Androids that came out till the 4.4 era.
Check out the photo of my attached I5800.
Not a single scratch on the screen, only the silver plating has come off.
Click to expand...
Click to collapse
I dont agree. In the past I always had to change my screen once or phone was full of marks if I didnt cover phone in some kind of casing. Now I dont even bother using a case as the last time I broke a screen from a phone was with Note 2 that I dropped into a puddle on asphalt. For example I had really really bad luck with my M8 like slipping a couple of times and it flew many meters high and landed face down and nothing. A few tempered screens but nothing else than some cosmetic marks. I feel the newer are much much better built than the phones like SGS2, Galaxy Nexus, Desire series etc etc.
[email protected] said:
True, but the old phones were quite sturdy, and by old I don't mean Nokia 3310, I mean Androids that came out till the 4.4 era.
Check out the photo of my attached I5800.
Not a single scratch on the screen, only the silver plating has come off.
Click to expand...
Click to collapse
that silver plating that has come off is the equivalent to any scratches you find on the back of the phone from putting/taking out of your pockets. It's just normal wear and tear. We need to keep in mind the material strength of the metal/plastic/polycarbonate/glass. The 6p's screen uses Corning gorilla glass 4. That stuff is virtually unscratchable from normal use. Of course you're not going to find much scuffs there compared to its soft aluminum body.
[email protected] said:
True, but the old phones were quite sturdy, and by old I don't mean Nokia 3310, I mean Androids that came out till the 4.4 era.
Check out the photo of my attached I5800.
Not a single scratch on the screen, only the silver plating has come off.
Click to expand...
Click to collapse
Wait a minute. I'm confused lol. You said the 6P is the most fragile phone you've ever used but now the damage or color loss in that pic is clearly worse. Not sure if trolling or...
shuckeru said:
that silver plating that has come off is the equivalent to any scratches you find on the back of the phone from putting/taking out of your pockets. It's just normal wear and tear. We need to keep in mind the material strength of the metal/plastic/polycarbonate/glass. The 6p's screen uses Corning gorilla glass 4. That stuff is virtually unscratchable from normal use. Of course you're not going to find much scuffs there compared to its soft aluminum body.
Click to expand...
Click to collapse
I am not talking about the screen, that thing is literally unscratched.
The rest of the phone is pretty weak though.
RoyJ said:
Wait a minute. I'm confused lol. You said the 6P is the most fragile phone you've ever used but now the damage or color loss in that pic is clearly worse. Not sure if trolling or...
Click to expand...
Click to collapse
Mate, that's a 5 year old phone.
This is a 1 month old phone.
Well as mentioned it is aluminum. By nature, it's a very soft metal. Think soda can. Obviously it isn't going to be indestructible like some older plastic phones you mentioned earlier. If you're looking for a tank of a phone, maybe you should have considered something else. Nexus line was never really meant to be "premium" and has always been cheaper than other highly marketed flagships. Like mentioned earlier, maybe managing expectations based on this info which has always been the case is in order. I get that you don't like it, so maybe your best bet is to sell and get another phone? I can't speak to the Nexus 6, but I've had my Nexus 5 since launch 2013 and it is still in mint condition. For that I only use the bumper case (wraps around the phone, doesn't cover the back) and still no small wear and tear scratches. Just one big one that I accidentally did with a razor blade.
[email protected] said:
I am not talking about the screen, that thing is literally unscratched.
The rest of the phone is pretty weak though.
Click to expand...
Click to collapse
It's no different from any other aluminum phone. you can't expect it to be as resistant as plastic... we've been trying to tell you this. I really am not sure what you are expecting an aluminum body to be.
RoyJ said:
Well as mentioned it is aluminum. By nature, it's a very soft metal. Think soda can. Obviously it isn't going to be indestructible like some older plastic phones you mentioned earlier. If you're looking for a tank of a phone, maybe you should have considered something else. Nexus line was never really meant to be "premium" and has always been cheaper than other highly marketed flagships. Like mentioned earlier, maybe managing expectations based on this info which has always been the case is in order. I get that you don't like it, so maybe your best bet is to sell and get another phone? I can't speak to the Nexus 6, but I've had my Nexus 5 since launch 2013 and it is still in mint condition. For that I only use the bumper case (wraps around the phone, doesn't cover the back) and still no small wear and tear scratches. Just one big one that I accidentally did with a razor blade.
Click to expand...
Click to collapse
Yes, I get it now.
shuckeru said:
It's no different from any other aluminum phone. you can't expect it to be as resistant as plastic... we've been trying to tell you this. I really am not sure what you are expecting an aluminum body to be.
Click to expand...
Click to collapse
Titanium.
[email protected] said:
Titanium.
Click to expand...
Click to collapse
Well in that case it would be exactly as expensive as other flagships. :silly:
Little heavier, too.
[email protected] said:
Titanium.
Click to expand...
Click to collapse
i would jump on that phone LOL
RoyJ said:
Well in that case it would be exactly as expensive as other flagships. :silly:
Little heavier, too.
Click to expand...
Click to collapse
Doesn't matter. **** will be the best phone ever.
shuckeru said:
i would jump on that phone LOL
Click to expand...
Click to collapse
I would sell everything I have for it.
[email protected] said:
Doesn't matter. **** will be the best phone ever.
I would sell everything I have for it.
Click to expand...
Click to collapse
You also have to take into account that Titanium isn't as effective as aluminum when it comes to heat transfer, so you'd have a warmer phone which would suffer from higher amounts of thermal throttling.
Hey guys!
So I received my FlexiCase for the OnePlus 5 today! I can finally move away from my custom case.. (a oneplus 3 case with the camera slot cut out!) I am delighted to see that Orzly are one of the first big-name brands with their cases out! I had the FlexiCase for my OnePlus 3 last year and loved it, so purchased this one the moment I saw it up for pre-order on amazon.
Now lets get into the review!
One of the first things you see in the package when you open it is a letter from the companies co-founder, hoping that you like the product!
http://imgur.com/a/TpGJG
Now onto the packaging, its similar to other products. Dead front you can see through the clear piece of plastic a part of your case, and the rest of the white, orange and gray packaging is surrounding it. The back of it houses some information about Orzly, some social media handles and tells you how you can win some free prizes!
Taking the case out of the packaging, it is a flexible gel case, as the name implies. All the buttons are covered by the case, and the case has protruding areas, along with a gap between the volume up and down buttons to help you determine which is which!
Putting the phone into the case, all the ports, including the camera and alert slider line up perfectly as you can see in the images below! None of the microphones are covered, which is great seeing as I had read of a few companies had covered the one by the camera at the back! Speaker lines up perfectly, and there is ample room for your dash charge cable and headphone jack to fit in, without pushing up the case. The alert slider has a nice little touch, there is a little bit of a space behind it so that your thumb can fit in nicely, without having to struggle! It is actually very useful and you will be able to see it in the images where I compare it with the OnePlus3/3t FlexiCase. Around the back in the bottom right there is a small bit of Orzly branding, which isn't really too obtrusive and is very small.
http://imgur.com/a/wNlwp
There is a lip around the screen, which would be able to protect your device should you drop it and will help to protect you from scratches!
http://imgur.com/a/wEg9a
My opinions? This case is great for anybody who loves the thinness of the OnePlus 5. It sits nearly flush with the back, yet protects the camera. Even though it is thin, it protects the screen which is great! I personally got the clear one, but they do have other matte colours should you want them such as black, red and blue! A link to buy can be found here! (change .co.uk to .com or whatever depending on your location!)
If you have any questions about this case, feel free to ask below and I will reply!
Mine also arrived, pretty standard, good quality and it's nice to be able to see the phone!
I like the oneplus original cases they look that good to me that I spent a extra 100 on Cases. I like every one. They case is OK too though
Mine also arrived today seems pretty good
Rebel7022 said:
I like the oneplus original cases they look that good to me that I spent a extra 100 on Cases. I like every one. They case is OK too though
Click to expand...
Click to collapse
$100 on cases? Wow thats dedication! haha
nadejo said:
Mine also arrived today seems pretty good
Click to expand...
Click to collapse
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
DarkExistence said:
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
Click to expand...
Click to collapse
I think the one from spigen i used on op3 is much better as it is a more hybrid material. Meaning the plastic at the edges is more solid. The edges on the orzly one are too soft so they are moving easily, i dont think it can protect the edges from high impact. Im sure if you dropp it on a edged surface like the edges of some stairs, the edges will bend back and the screen or edges will be f***ed for sure. I will buy a spigen hybrid crytal clear as soon as they pop up on amazon germany.
nadejo said:
I think the one from spigen i used on op3 is much better as it is a more hybrid material. Meaning the plastic at the edges is more solid. The edges on the orzly one are too soft so they are moving easily, i dont think it can protect the edges from high impact. Im sure if you dropp it on a edged surface like the edges of some stairs, the edges will bend back and the screen or edges will be f***ed for sure. I will buy a spigen hybrid crytal clear as soon as they pop up on amazon germany.
Click to expand...
Click to collapse
Ah yeah, this is the flexicase its a bit different. I used the orzly fusion bumper case mainly on my op3 last year, which would be an equivalent to that spigen i believe
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
DarkExistence said:
Awesome! Let me know your experience with it soon! Would like to see if its similar to mine
Click to expand...
Click to collapse
I have had the cases since early drop. I can tell you about the Karbon, red & black tpu, the ebony
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason
Click to expand...
Click to collapse
Sooo much this. You'll need to replace this case monthly if you want to keep enjoying it. It'll look like crap soon.
Only way I'll get a clear case is if the back is hard plastic that won't discolor and the edges need to be a solid color TPU.
biglilsteve said:
Sooo much this. You'll need to replace this case monthly if you want to keep enjoying it. It'll look like crap soon.
Only way I'll get a clear case is if the back is hard plastic that won't discolor and the edges need to be a solid color TPU.
Click to expand...
Click to collapse
Have to say the one case thats nearly clear which doesn't discolour (noticeably) is the Tech 21 variants, they have a mesh so it's no completely apparent.
But yea I learned long ago that clear cases are a no no, nicotine brown is not a good look.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others i've seen. hoping this stays the same!
DarkExistence said:
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others i've seen. hoping this stays the same!
Click to expand...
Click to collapse
Aye it does go bad after a while, I had one years ago when i smoked and put two and two together, but it's just grime that it picks up, stick with smokey ones now or black.
Supposed they still get filthy but cant' see it as much.
Worst thing about it is they look amazing when you first get them
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Well if your interested it think they also do solid colour version of the case.
A Guy Called Revive said:
Well if your interested it think they also do solid colour version of the case.
Click to expand...
Click to collapse
nice one.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
A Guy Called Revive said:
Well if your interested it think they also do solid colour version of the case.
Click to expand...
Click to collapse
They do but those aren't even shipping yet. When I ordered my black case on Amazon back on June 24th the listing said shipping would start on July 13th. I've already dropped my slippery OP5 once and have a small dent to show for it. I hope the case arrives while I still have something to protect with it.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Same here. I loved the concept of a clear case to show off a nice phone. First time using a clear case was the one that came with my OPx. Didn't take long for it to start turning that nicotine brownish yellow color. (my bad smoking habit didn't help much of course) Got a black spigen case after that and haven't looked back.
I'm waiting for spigen to come out with one for the OP5 and hopefully they do so quickly. I nearly had a heart attack when I dropped it onto the concrete while exiting my work van. (chevy 3500 so It fell from a pretty good distance) Landed screen first but luckily the gorilla glass 5 held up. Ive also got one of the official OP wooden cases which has so far saved the metal finish from some minor scrapes and dings here and there.
dladz said:
That's going to be a nice shade of nicotine brownish yellow in about a month.. Whether you smoke or not.
Will never buy a clear case again for this reason.
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yep I never buy perfectly clear cases anymore, they always go off colour and look dirty. I've gone with the Otterbox for my OP5 this time around, that might change if I start feeling it's too bulky. BUT I love the knowledge and reassurance of the protection it offers over other slim/flexi cases.
DarkExistence said:
Hopefully not! My 3/3t flexicase is still pretty clear, slighty more yellow but not as bad as others I've seen. hoping this stays the same!
Click to expand...
Click to collapse
Yeah, transparent plastic anything can vary quite alot I find. Some transparent stuff I've had discolors really easy, others last absolutely years without losing a single thing and still cooking crystal clear. (others, varying degrees in between). Have you got any pics of your 3T FlexiCase to show me how they hold up over the test of time? If it's not that bad, then I do like the idea of having transparent cases, because the phone itself seems pretty nice, so is nice to be able to see it through the case, especially stiff like the logo, etc.. But if it's bad, then would probably just go for a colored version instead.
Looks like even the colored ones are finally available now (even just yesterday, all but the transparent one were all showing on pre-order, so looks like t's a safe bet deliverywise for any of the colors either way now)
www.amazon.co.uk/dp/B072QX9H9G but I would still be keen to get your opinion on this, as transparent would have been my first choice, however it's a very good point that alot of people have raised, so I want to be extra specially careful to hear from real people who have used them before knowing which color to get. Main thing is I want it to look nice!
Thanks.