Latest TWRP v3.0.2-1 for the Samsung Galaxy SM-A510
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Flash with Odin 3.10.7 using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
TWRP should now boot.
twrp_3.0.2-1_sm-a510
TO ROOT
Flash the file below in twrp.
DO NOT LET TWRP ROOT YOUR DEVICE WHEN IT ASKS. USE ONLY THE FILE BELOW:
https://download.chainfire.eu/921/SuperSU
NOTE: ON SOME ANDROID 5.1.1 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Device Tree: Coming soon
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
root for Samsung Galaxy SM-A510FD
murtada_1989a said:
root for Samsung Galaxy SM-A510FD
Click to expand...
Click to collapse
Post #22
http://forum.xda-developers.com/showthread.php?p=65301392
Please guys can I have some feedback on this? I don't own this device.
A710F/FD already confirmed working.
I will try this but can i when it fails just use odin to go back to stock rom?
franzerelli said:
I will try this but can i when it fails just use odin to go back to stock rom?
Click to expand...
Click to collapse
Yep just odin back the stock firmware or you can wait until later and I will post the stock recovery.
It's highly likely you will have no issues however.
confirmed working. Thanx ashyx. You are the greatest.
franzerelli said:
confirmed working. Thanx ashyx. You are the greatest.
Click to expand...
Click to collapse
No worries thanks for the confirmation.
failed
flashed #twrp but failed with an error
"Custom Binary(Recovery) Blocked By Frp Lock"
You need to enable OEM unlock in developer settings.
Sent from my HTC One_M8 using XDA Free mobile app
Will this work on a510y?
Sent from my SM-A510Y using Tapatalk
ashyx said:
You to enable OEM unlock in developer settings.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
thanks for the reply.
but the device is already locked [FRP]
i tried OTG method.
it's not working out.
and i need twrp to perform FRP unlock.
please let me know if you know any other method to unlock FRP.
ZaaherAnsari said:
thanks for the reply.
but the device is already locked [FRP]
i tried OTG method.
it's not working out.
and i need twrp to perform FRP unlock.
please let me know if you know any other method to unlock FRP.
Click to expand...
Click to collapse
Flash the stock firmware that will get rid of the FRP Lock.
Then make sure you disable it in developer settings.
Is it possible to have TWRP 3.0.0-0 for GALAXY A7(2016) SM-A710Y? Thanks.
Samtinker said:
Is it possible to have TWRP 3.0.0-0 for GALAXY A7(2016) SM-A710Y? Thanks.
Click to expand...
Click to collapse
You're device has the same specs as the sm-a710f.
All the 710 models use the same device code a7xelte.
It highly likely that TWRP will work for any a710.
I only append the model number with F/FD as they are the only ones to have been tested.
If your worried then download the stock firmware first as a backup. However I'm quite confident you won't need it.
If you do go ahead post back with your results.
ashyx said:
You're device has the same specs as the sm-t710f.
All the 710 models use the same device code a7xelte.
It highly likely that TWRP will work for any T710.
I only append the model number with F/FD as they are the only ones to have been tested.
If your worried then download the stock firmware first as a backup. However I'm quite confident you won't need it.
If you do go ahead post back with your results.
Click to expand...
Click to collapse
Hi ashyx,
I succeeded to flash twrp_2.8.7.1_LL_5.1.1_t710.tar with Odin, but can't enter TWRP recovery. I got message "Recovery is not Seandroid Enforcing". Any other versions I can try? Thanks.
My firmware is A710YZTU1AOL8 Android 5.1.1.
---------- Post added at 03:41 PM ---------- Previous post was at 03:12 PM ----------
Samtinker said:
Hi ashyx,
I succeeded to flash twrp_2.8.7.1_LL_5.1.1_t710.tar with Odin, but can't enter TWRP recovery. I got message "Recovery is not Seandroid Enforcing". Any other versions I can try? Thanks.
My firmware is A710YZTU1AOL8 Android 5.1.1.
Click to expand...
Click to collapse
Hi ashyx,
I made the mistake. I flashed the wrong TWRP. Now it's no problem to enter TWRP 3.0.0-0 for sm-a710f. Thanks.
Everybody try this? I fear it's not working :'(
Samtinker said:
Hi ashyx,
I succeeded to flash twrp_2.8.7.1_LL_5.1.1_t710.tar with Odin, but can't enter TWRP recovery. I got message "Recovery is not Seandroid Enforcing". Any other versions I can try? Thanks.
My firmware is A710YZTU1AOL8 Android 5.1.1.
---------- Post added at 03:41 PM ---------- Previous post was at 03:12 PM ----------
Hi ashyx,
I made the mistake. I flashed the wrong TWRP. Now it's no problem to enter TWRP 3.0.0-0 for sm-a710f. Thanks.
Click to expand...
Click to collapse
You do realise you've posted in the sm-a510 thread and not sm-t710?
Can you post your success here:
http://forum.xda-developers.com/showthread.php?t=3314403
ashyx said:
You do realise you've posted in the sm-a510 thread and not sm-t710?
Can you post your success here:
http://forum.xda-developers.com/showthread.php?t=3314403
Click to expand...
Click to collapse
My device is A510FD and i flash TWRP 3.0.0 successed. But go to recovery it's show the fault Recovery is not Seandroid Enforcing
Tuanrangsut1 said:
My device is A510FD and i flash TWRP 3.0.0 successed. But go to recovery it's show the fault Recovery is not Seandroid Enforcing
Click to expand...
Click to collapse
That's not a fault it's normal.
Related
Latest TWRP v3.0.2-1 for the Samsung Galaxy SM-A310
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Flash with Odin 3.10.7 using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
TWRP should now boot.
twrp_3.0.2-1_sm-a310
TO ROOT
Flash the file below in twrp.
DO NOT LET TWRP ROOT YOUR DEVICE IF IT ASKS. USE ONLY THE LATEST VERSION BELOW:
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
NOTE: ON SOME ANDROID 5.1.1 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Device Tree: Coming soon
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Confirmed working by Rotkaeqpchen.
Also thanks to him for his donation. :thumbup: @Rotkaeqpchen, by the way I put a fix in your build for MTP. Does it work?
If you get a USB device not recognised error when enabling MTP then disable it and then quickly hit the button again to re-enable and it should work OK.
ashyx said:
Confirmed working by Rotkaeqpchen.
Also thanks to him for his donation. :thumbup: @Rotkaeqpchen, by the way I put a fix in your build for MTP. Does it work?
If you get a USB device not recognised error when enabling MTP then disable it and then quickly hit the button again to re-enable and it should work OK.
Click to expand...
Click to collapse
Works perfectly, thanks Ashyx!
thomekh said:
Works perfectly, thanks Ashyx!
Click to expand...
Click to collapse
Good, could you confirm something? How long does it take to boot to twrp?
Sure, from the Samsung Galaxy screen to the TWRP logo takes approx 2 seconds.
thomekh said:
Sure, from the Samsung Galaxy screen to the TWRP logo takes approx 2 seconds.
Click to expand...
Click to collapse
That's normal, thanks for confirming.
Worked flawlessly.
NB: If you get a FAP lock error in Odin, Enable OEM unlock in Developer options.
Do i go into download mode first or?
i tried the key combination... but with the combination i only can go into the stock recovery. but not in the download mode ???
is there any trick?
i've managed the flashing..
at first you must shotdown the phone (without connected usb calbe). then go to downloa dmode with vol down + home + power, than you can easyly flash the twrp image. after this go to twrp recovery with the key combination described in the first post and flash supersu.
thx
Does it support the "F" version?
SM-A310F
piroxi said:
Does it support the "F" version?
SM-A310F
Click to expand...
Click to collapse
ashyx said:
Unofficial release -TWRP recovery for the Galaxy A3 - SM-A310F/FD/Y/M Exynos7580
Click to expand...
Click to collapse
. .
ashyx said:
[...] TWRP v3.0.0-0 for the Samsung Galaxy SM-A310 [...]
Device Tree: Coming soon
Click to expand...
Click to collapse
Thanks for TWRP :good: & looking forward to the device tree for the A310 series :highfive:.
Rooted but xmodgames for coc not worked.
Thanks for this custom recovery !
I managed to install TWRP and to root the device.
... but I did not enable OEM unlock in developper options, so I can't boot the phone.
Here are the messages I get :
- "RECOVERY IS NOT SEANDROID ENFORCING"
- "Custom binary blocked by FRP lock"
I have to flash a stock firmware before I can reinstall TWRP.
Where can I get a stock firmware for SM-A310F ? Are the ones listed here safe to flash : http://forum.xda-developers.com/samsung-a-series/help/rom-stock-firmware-samsung-galaxy-a3-t3305861?nocache=1 ?
---------- Post added at 11:34 PM ---------- Previous post was at 11:01 PM ----------
sisssou said:
Thanks for this custom recovery !
I managed to install TWRP and to root the device.
... but I did not enable OEM unlock in developper options, so I can't boot the phone.
Here are the messages I get :
- "RECOVERY IS NOT SEANDROID ENFORCING"
- "Custom binary blocked by FRP lock"
I have to flash a stock firmware before I can reinstall TWRP.
Where can I get a stock firmware for SM-A310F ? Are the ones listed here safe to flash : http://forum.xda-developers.com/samsung-a-series/help/rom-stock-firmware-samsung-galaxy-a3-t3305861?nocache=1 ?
Click to expand...
Click to collapse
Tested one : these roms seem OK
Is there any CUSTOM Rom for the Samsung Galaxy A3 2016?
This is my first Samsung phone, and I would like to know whether there are a lot of updates via OTA or not !
Indeed I want to decide if I have to keep the phone rooted or not to catch these OTAs...
Thanks for your advices
sisssou said:
This is my first Samsung phone, and I would like to know whether there are a lot of updates via OTA or not !
Indeed I want to decide if I have to keep the phone rooted or not to catch these OTAs...
Thanks for your advices
Click to expand...
Click to collapse
Never believe in Samsung's update support. I bought an S5 mini and was promised android l. I got it after the release of android m.....
Any questions?
No more question ; -)
Thanks !
Zocker1304 said:
Never believe in Samsung's update support. I bought an S5 mini and was promised android l. I got it after the release of android m.....
Any questions?
Click to expand...
Click to collapse
Do you know if there are some custom rom for this device?
Attached in this thread is TWRP-3.1.1-0 repackaged for the SM-T285 built by @_mone from his SM-T280 build. Basically I packaged the latest gtexslte kernel with the ramdisk build by @_mone. I don't have time to build twrp myself so a big thanks to him.
Update August 20, 2017
==================
- Remove persdata error message when wiping
- fix properties to correctly use gtexslte instead of gtexswifi
Issues:
- Seems to start slower than the 3.0.1 build
For GPL compliance:
https://github.com/jedld/kernel_samsung_gtexslte.git
Sources:
Omni TWRP device tree is the same as the one @_mone is using but use the gtexslte kernel and skip the DTB boot image header shenanigans that the SM-T280 uses.
See thread
INSTALLATION INSTRUCTIONS:
This installation instruction is only for the LTE enabled version of the Samsug galaxy tab A 7" 2016 (SM-T285). If you have a wifi-only version (SM-T280) go to this thread instead.
Disclaimer: I am not responsible for bricked devices and provide no warranty, make sure you made the proper backups and contingencies before you do this procedure. Make sure you have a stock firmware available as a contingency plan
Before going through this make sure your tablet is OEM Unlocked!. Make sure you have developer settings enable and there should be a setting there that says OEM unlock. That should be enabled, otherwise your SM-T285 will not accept firmware changes. Also make sure your tablet has sufficient charge and is not about to die.
1. Put your tablet in download mode (Turn off. holding POWER + HOME + VOL DOWN until download mode appears. There will be a warning that about custom firmware blah- blah-blah just hit volume up to proceed). Connect your tablet to your computer using the provided micro usb cable.
2. Flash with ODIN 3.10.7 in the AP slot. Uncheck Auto reboot. (If you are on Linux you can use Heimdall
3. Load the respective attached file (TWRP_3.1.1-0_SM-T285_20170501.zip) in this thread below into the AP slot and hit start.
4. After flashing when ODIN says PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.
Root and SuperSU
==============
1. Download the latest available SuperSu Zip from chainfire. Install Zip using TWRP. Reboot phone.
2.Your phone might reboot a couple of times, however at the end of the process you should be rooted.
Credits:
@_mone and @ashyx
hi, i can't install with odin v3.10.7. "md5 error! Binnary is invalid"
help please
oNuRs7 said:
hi, i can't install with odin v3.10.7. "md5 error! Binnary is invalid"
help please
Click to expand...
Click to collapse
reuploaded. see if it fixes things, make sure you extract the zip first though.
jedld said:
reuploaded. see if it fixes things, make sure you extract the zip first though.
Click to expand...
Click to collapse
it's work thanks.
I am getting a `Failed to mount '/persdata' (Invalid argument)`. What does this mean? Is it harmful? My device is softbricked atm, but I am unsure if it's related.
EDIT: Whoops, my bad. Wrong topic. Can someone delete this?
Binero said:
I am getting a `Failed to mount '/persdata' (Invalid argument)`. What does this mean? Is it harmful? My device is softbricked atm, but I am unsure if it's related.
Click to expand...
Click to collapse
This should be fine.
TWRP-3.1.1-0 repackaged for the SM-T285 build
Hi
Does the TWRP-3.1.1-0 repackaged for the SM-T285 build kernel allow for USB OTG host and simultanious charging mode?
TWRP 3.2.3-0
twrp-3.2.3-0-gtexslte.img
twrp-3.2.3-0-gtexslte.tar
I used my device tree that I created from _mone's android-6.0 gtexswifi device tree and jedld's omni-6.0 gtexslte source.
Bootloader and modem
T285XXU0ARB1_T285XXU0AQD1.tar
You might as well update these while you're trying out the new TWRP Use Odin's "AP" button.
@acornkenya, @barani kumar, @User_99: you guys thanked my post above. Does that mean my twrp build works?
ripee said:
@acornkenya, @barani kumar, @User_99: you guys thanked my post above. Does that mean my twrp build works?
Click to expand...
Click to collapse
The bootloader and modem work perfectly, but the TWRP failed to boot. I apologize for not informing you sooner; I have been very busy.
---------- Post added at 11:03 PM ---------- Previous post was at 11:01 PM ----------
ripee said:
@acornkenya, @barani kumar, @User_99: you guys thanked my post above. Does that mean my twrp build works?
Click to expand...
Click to collapse
The bootloader and modem work perfectly, but the TWRP failed to boot. I apologize for not informing you sooner; I have been extremely busy.
acornkenya said:
The bootloader and modem work perfectly, but the TWRP failed to boot. I apologize for not informing you sooner; I have been very busy.
---------- Post added at 11:03 PM ---------- Previous post was at 11:01 PM ----------
The bootloader and modem work perfectly, but the TWRP failed to boot. I apologize for not informing you sooner; I have been extremely busy.
Click to expand...
Click to collapse
No problem at all, just curious. I'll take another look later.
ripee said:
@acornkenya, @barani kumar, @User_99: you guys thanked my post above. Does that mean my twrp build works?
Click to expand...
Click to collapse
Currently not. Need the device. No time for playing.
I have one will boot to tarp 3.1.1 but that's all cant get roms to load...
Here's Repack of the stock kernel
with dm-verity
SONY RIC off
SperSU EnableD
Working on Z4 Tablet (SGP771 - SGP712) 7.1.1 FW 32.4.A.0.160
DOWNLOAD:
SECOND POST
HOW TO INSTALL :
1. Extract zip file And Flash in Fastboot
2. Install TWRP 3.1.1.0 From Here
3. Then Flash SuperSU.zip From Here
4. Done You Get ROOT
Download section
Changelog :
SGP712 aded
dm-verity is Disabled
Sony RIC is Disabled
SR1-SuperSU-v2.82-SYSTEMMODE.zip Installed
busybox Installed
@IlariJ Now Done
Nimadroid said:
@IlariJ
Click to expand...
Click to collapse
THANKS!! :victory:
May i ask, ... would it be possible for you to make a kernel for the SGP712 - Wifi only version too?
Nimadroid said:
@IlariJ Now Done
Click to expand...
Click to collapse
The device boots fine (no longer infinite bootloop), but once it has powered up, the touchscreen doesn't work.
I have rebooted several times and no help.
In TWRP even the touch works.
Can You fix this? @Nimadroid
IlariJ said:
The device boots fine (no longer infinite bootloop), but once it has powered up, the touchscreen doesn't work.
I have rebooted several times and no help.
In TWRP even the touch works.
Can You fix this? @Nimadroid
Click to expand...
Click to collapse
Flash Stock ftf
Then Flash kernel
If don't change I make another one for you
Mr. Schnabel said:
May i ask, ... would it be possible for you to make a kernel for the SGP712 - Wifi only version too?
Click to expand...
Click to collapse
Provide me the kernel.sin from lastest FTF of your device
And i update this poet for you with your device kernel
@Nimadroid -> Send ya a PM
Nimadroid said:
Flash Stock ftf
Then Flash kernel
If don't change I make another one for you
Click to expand...
Click to collapse
Didn't help.:crying:
@ Mr. Schnabel : Goog idea
@ Nimadroid : Thanks in advance for the SGP772 version
ilarij said:
didn't help.:crying:
Click to expand...
Click to collapse
steevou said:
@ mr. Schnabel : Goog idea
@ nimadroid : Thanks in advance for the sgp772 version
Click to expand...
Click to collapse
post updated new device aded
Nimadroid said:
post updated new device aded
Click to expand...
Click to collapse
Kernel works, thanks
---------- Post added at 07:07 PM ---------- Previous post was at 07:02 PM ----------
SGP712 should use this recovery
https://www.androidfilehost.com/?fid=673368273298956222
Nimadroid said:
post updated new device aded
Click to expand...
Click to collapse
Works, thanks!! :victory:
Upgrade from 7.0
Hi,
quick question:
I am on 7.0 with root and DRM fix comming from here: "[Guide] Nougat with DRM fix, root and TWRP* (SGP771)".
Can I simply flash kernel and TWRP as you described on top of these or do I have to restart with any TFT's on 7.11?
Thanks a lot and best regards
Hi guys, i need your help!
Flashed new tft .160 via Flashtool - check
Flash boot via ADB - check
Flash Twrp via ADB - check
Reboot into recovery - nope nope nope ...
No matter what or how i flash i simply cannot boot into recovery
Tried older Twrp versions, in ADB shell everything is ok, no error, .....
simply don´t know what to do anymore hmmmmm ....
Mr. Schnabel said:
Hi guys, i need your help!
Flashed new tft .160 via Flashtool - check
Flash boot via ADB - check
Flash Twrp via ADB - check
Reboot into recovery - nope nope nope ...
No matter what or how i flash i simply cannot boot into recovery
Tried older Twrp versions, in ADB shell everything is ok, no error, .....
simply don´t know what to do anymore hmmmmm ....
Click to expand...
Click to collapse
If you're using SGP712 you need to flash the proper recovery for that device, the one in OP is for SGP771
This one is the correct one (also linked 3 posts above): https://www.androidfilehost.com/?fid=673368273298956222
Well .. actually OP and your´s in 3rd post and here are all 3 the same
Like said tried these here, from androPlus thread, etc etc ...
Flash via fastboot is working but cannot enter recovery after flashing
Tried to access via Power button, volume button, adb command, ... i dont even have a led signal at power on
Mr. Schnabel said:
Well .. actually OP and your´s in 3rd post and here are all 3 the same
Like said tried these here, from androPlus thread, etc etc ...
Flash via fastboot is working but cannot enter recovery after flashing
Tried to access via Power button, volume button, adb command, ... i dont even have a led signal at power on
Click to expand...
Click to collapse
oh, didn't notice, although I'm pretty sure the one in OP was different
It's booting on my device, but the first time I tried it didn't. I think it booted when I accidentally flashed it on the boot partition instead of the recovery one maybe you can try that.
but before, try hot booting it with:
Code:
fastboot boot ~/Downloads/TWRP-3.1.1-lineageos-karin_windy-20170520.img
Hotboot endet in an Bootloop but flashing recovery to Boot helped! Many many Thanks
€dit: Ok my bad didnt work ....
Hotboot didnt work
Flashing recovery to boot did boot up Twrp - Wiped cache/dalvik, flashed SU, Tablet constanty reboot into TWRP instead of system
Flashed Kernel/Boot to Boot - Tab boots into system but no root
Tried to reboot into recovery - no luck
Android 10 was released today for Galaxy M30 (INS) ,
Here i am posting 2 links
1. For users Who Just Want Stock Rom as it is
2. For Users Who Need rooted stock rom
Steps :
1. Download Zip and Extract
2. For without root users just flashing via odin would be enough
3. Progress if you wana root
4. when your done with setting up your stock rom , go into Software info and activate developer option
5. Turn on OEM unlock and turn off Auto Update System
6. Boot into download mode again
7. open odin and turn off auto reboot
8. Choose the magisk patched zip and extract
9. In Odin under AP choose this tar and flashed
10. now be careful and press volume down and power till your device boots and quickly press volume up and power to boot into recovery mode
11. Wipe Data in stock recovery and reboot and your good to go
So Here's a Grive Link
Both Firmwares need to be extracted and flashed via odin
Unrooted Stock Firmware
Stock Unrooted
Magisk Rooted
Magisk Rooted
XDAevDB Information
ANDROID 10 (ONEUI 2) Stock Firmware and Rooted (M305FDDU3CSL4), ROM for the Samsung Galaxy M30
Contributors
Er. Aditya
ROM OS Version: Android 10
Thanks to ,
Samsung For Firmware
topjohnwu for magisk
reserved just in case
last one
Sorry for ignorance, but... how do I flash the stock unrooted firmware using Odin?
shrmp said:
Sorry for ignorance, but... how do I flash the stock unrooted firmware using Odin?
Click to expand...
Click to collapse
unzip the zip file and there u will find these files
AP_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship_meta_RKEY_OS10.tar.md5
BL_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
CP_M305FDDU3CSL1_CP14521597_CL17406009_QB27626610_REV00_user_low_ship.tar.md5
CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
in odin on your right you will find slots to select files
under BL choose BL_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
under AP choose AP_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship_meta_RKEY_OS10.tar.md5
under CP choose CP_M305FDDU3CSL1_CP14521597_CL17406009_QB27626610_REV00_user_low_ship.tar.md5
under CSC choose HOME_CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
make sure ur phone is in download mode and you have your drivers installed
I see, does updating with Odin erase userdata?
---------- Post added at 22:05 ---------- Previous post was at 21:08 ----------
Nevermind, I just tried flashing the update but it does not work with the SM-M305M variant. Back to waiting...
Er. Aditya said:
7. open odin and turn off auto reboot
8. Choose the magisk patched zip and extract
9. In Odin under AP choose this tar and flashed
Click to expand...
Click to collapse
But, in Magisk here, it states:
Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
Will it be any issues, if we just flash the AP?
Thanks. Flashed Magisk now.
Can i simply falsh it with twrp??
i did everything correctly i'm stuck on Samsung Boot Logo
help
zer0C00L...... said:
i did everything correctly i'm stuck on Samsung Boot Logo
help
Click to expand...
Click to collapse
these steps have been tested alot of times so make sure you dont miss any
Prxtek said:
Can i simply falsh it with twrp??
Click to expand...
Click to collapse
Nope. Plus this phone does not have a TWRP for Q as of now. Moreover, please do not try any TWRP as of now.
Use ODIN only.
---------- Post added at 00:48 ---------- Previous post was at 00:46 ----------
Er. Aditya said:
these steps have been tested alot of times so make sure you dont miss any
Click to expand...
Click to collapse
By any chance you have a list of bloatwares to remove?
vdbhb59 said:
Nope. Plus this phone does not have a TWRP for Q as of now. Moreover, please do not try any TWRP as of now.
Use ODIN only.
---------- Post added at 00:48 ---------- Previous post was at 00:46 ----------
By any chance you have a list of bloatwares to remove?
Click to expand...
Click to collapse
with root you can simply use titanium backuo and remove according to you
Er. Aditya said:
with root you can simply use titanium backuo and remove according to you
Click to expand...
Click to collapse
I tried, and I end up in bootloop, millions of times..
Trouble is, some inbuilt apps are bound with /system, and unable to get through. Moreover, you cannot imagine, I have been into bootloop 11 times since last evening.
So, if a list is present, I would be happy.
Last thing, did you notice, even if you have not logged into google account, it still keeps installing those 5 bloody recommended apps.
vdbhb59 said:
I tried, and I end up in bootloop, millions of times..
Trouble is, some inbuilt apps are bound with /system, and unable to get through. Moreover, you cannot imagine, I have been into bootloop 11 times since last evening.
So, if a list is present, I would be happy.
Last thing, did you notice, even if you have not logged into google account, it still keeps installing those 5 bloody recommended apps.
Click to expand...
Click to collapse
thats google preload stuff but happens just once , i havent faced this issue yet between make a list of apps your removing il take a look
and il work on a debloated version once i get some time
Please upload to one of the alternative sites (google quota block)
Whats the deal with U3, U4, U5 and greater version of bootloaders with Exynos chipset?
I know Samsung has locked bootloaders of USA snapdragon variants, but can all exynos chip-set ones be unlocked?
Or till U2 bootloader can be unlocked and can have root but above U3 cannot be rooted?
It's so confusing, Please someone Help me
Posted for the latest Patched Magisk here: https://forum.xda-developers.com/ga...d-firmware-t4026819/post81336955#post81336955
---------- Post added at 01:52 ---------- Previous post was at 01:52 ----------
For guides: https://forum.xda-developers.com/galaxy-m30/how-to/guide-galaxy-m30-recovery-edl-modes-t4020231
The M305M variant firmware with Android 10 can be found on sammobile. Can it be flashed without regard for the country it was made for or it has to be the same as the original firmware?
kesleyf said:
The M305M variant firmware with Android 10 can be found on sammobile. Can it be flashed without regard for the country it was made for or it has to be the same as the original firmware?
Click to expand...
Click to collapse
Can be used. However ensure you have mounted system.
You may lose data due to that. So ensure to have a backup.
Unlocking Bootloader1. Make sure you have a sim and active mobile data. Then go to about phone tap build number 7-8 times. After that go to advanced settings > developer options > turn on OEM unlocking and then check if this device is secure and click add account and device.
2. Download Mi unlock tool from here. Extract it and paste it in C:/unlock. or else your device won't be recognized for unlocking.
3. Open Mi unlock tool and then enter the Mi account which was on your device. Put your device in fastboot mode by pressing vol- and power and then connect to PC. Press unlock and if it tells you to wait you have no other option but to wait. If your mi flash tool shows connect your device even after you have connected it. Follow this guide here.
4. After you have unlocked your bootloader reboot your phone.
Flashing TWRP and Rooting via magisk
1. Download this TWRP image here. Thanks to the original developer mauronofrio.
2. Download adb and fastboot tools here and install it.
3. Now put your phone in fastboot mode and connect it with your pc. Now where you have downloaded the TWRP file rename it to TWRP.img and open a CMD window there if you don't know how just google.
4. Type the following commands
1. fastboot devices
2. fastboot flash recovery TWRP.img
3. fastboot reboot recovery.
Click to expand...
Click to collapse
5. Your phone will boot into TWRP now. But TWRP will be overwritten by stock miui recovery to stop that you need to flash Magisk. Download this zip move it to internal storage then flash by tapping on install and swipe to flash. Reboot your device. Reboot to recovery again to check if TWRP is present.
Now your device is rooted
OR
Flash latest OrangeFox Recovery if you don't want magisk.
Flashing A rom
1. Download.
2. Flash.
3 Format Data.
Done
Feel free to ask any questions. And don't point a finger at me for messing your device.
My mi unlock tool says can't get info. I using Indian version miui 12
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
igeekyayush said:
My mi unlock tool says can't get info. I using Indian version miui 12
Click to expand...
Click to collapse
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Doombuggie85 said:
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
Click to expand...
Click to collapse
Yes, it does.
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
LoadOP2 said:
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Click to expand...
Click to collapse
igeekyayush said:
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
Click to expand...
Click to collapse
Okay keep the sim inserted and use the device for 7 days. And if it doesn't work try using older version of unlock tool.
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
I've unlocked the bootloader using the unlock tool and waited for 7 days,
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Skip the flashing a rom part and you will be good to go.
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
Click to expand...
Click to collapse
You can flash twrp and then check if it persists. If not flash magisk again their is no thing as magisk colliding lol. Just make sure you flash a newer version. And if nothing works flash stock rom and then twrp.
If you have the stock boot IMG flash it and then intsall twrp and magisk.
smsry said:
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
Click to expand...
Click to collapse
LoadOP2 said:
Skip the flashing a rom part and you will be good to go.
Click to expand...
Click to collapse
Haha, makes sense! Thank you for your answers
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
smsry said:
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
Click to expand...
Click to collapse
Yes, If you use a lock screen enter that password it will be decrypted. You will have to format data if you decide to flash any other rom anyway.
flashed twrp but not able to boot into recovery.
igeekyayush said:
flashed twrp but not able to boot into recovery.
Click to expand...
Click to collapse
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Sir ive used xiaomi flashtool v2 after that and it worked. Thanks sir. After that i updated to latest twrp from that chinese one.
LoadOP2 said:
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Click to expand...
Click to collapse
Joyeuse
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
rfguy said:
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
Click to expand...
Click to collapse
Yes Unified means all Snapdragon 720g Devices which include Joyeuse, Curtana, Gram, Excalibur.
Hey buddy, thank you for this quick step-by-step guide. I flash ROMs since 2012 and you know what? It helped me the same. Having all stuff needed for go from stock to custom concentrated in one place (plus some useful tip like the Magisk flash at the end) it's always useful and time-saving. Thank you
2 Micro-notes about fastboot btw:
- write 'fastboot (with lowered 'f'): it may confuse some newbie
- it's 'reboot' instead of 'boot'