Hi guys
I'm trying to port CWM recovery to my phone since it doesn't have one.
So I read some tutorials, "MTK Droid Tools", all that we already know...
I made the CWM, ok, but when I'll "test" the CWM using [fastboot boot recovery.img] the screen freezes in "transferring" and ADB in "booting..."
However when I try to boot the stock recovery the same thing happens.
So guys, maybe the only way is flash it (mobile uncle...) and see what will result?
Please, help me hehe
I want to enable OTG support by the kernel, believing that all MTK phones shares the same PMIC. What do you think about? :good:
I got USB otg but didn't get CWM... Õ.ô
let mtk droid tools do the job for you (it worked for me) , use your boot.img from your device, the softare will create it and flash it then in a single hit
BrainBooster said:
let mtk droid tools do the job for you (it worked for me) , use your boot.img from your device, the softare will create it and flash it then in a single hit
Click to expand...
Click to collapse
Hey hey hey man
Do you have an iNew V1?
Look, I've tried a loot of tools to port, believe me, but NOTHING works.
I used MTK Droid Tools to create the CWM and Mobile Uncle Tools to flash it, but did it work? Didn't, of course. Because this I'm here... hahaha
So man tell me your magic.
Many people said "do not flash using mtk droid tools, use mobile uncle, it's better".
Anyway... help me?
i have an mt6582 device and i did everything by using mtk droid tools
just make a full backup then let it create the recovery by using your own boot.img an the end of the procedure let it flash the just created recovery and reboot your phone, that's it
BrainBooster said:
i have an mt6582 device and i did everything by using mtk droid tools
just make a full backup then let it create the recovery by using your own boot.img an the end of the procedure let it flash the just created recovery and reboot your phone, that's it
Click to expand...
Click to collapse
mt6582... Ok.
What is the Android version of your phone?
My phone runs KK and as I had read in chinaphonearena is necessary update some file/files (by rua1) in path "files" inside MTK Droid Tools folder.
Well, I noticed that recovery.img and boot.img are inside mmcblk0.
Mobile Uncle apparently doesn't consider scatter file to flash the recovery. Perhaps it use "dd if=* of=*" method to flash, which can result in brick.
Now I want to enable self powered otg support on this device. Maybe changing more deeper the software I can get this.
mine is a tablet and it runs JB, i wouldn't advice you to use mobileuncle to flash anything as it is not meant to do that even if it can.
use mtkdroid tools or sp flashtool
BrainBooster said:
mine is a tablet and it runs JB, i wouldn't advice you to use mobileuncle to flash anything as it is not meant to do that even if it can.
use mtkdroid tools or sp flashtool
Click to expand...
Click to collapse
Uhu! It worked
Thanks man for your help...
####
EDIT
####
Now how can I get a touch recovery?
Great !
about the touch stuff... start taking a look here http://forum.xda-developers.com/showthread.php?t=2748169
BrainBooster said:
Great !
about the touch stuff... start taking a look here http://forum.xda-developers.com/showthread.php?t=2748169
Click to expand...
Click to collapse
I tried all "Easy Magic'" tools and all of them return an error when try to repack the recovery.img...
Related
Hi!
1. I would like to flash ClockworkMod Recovery (or any other recovery method) on my Tianji i9220 device, because the phone hasn't got too many features, if i push volume+ +power button the Factory menu has only tests and reboot option, but i would like to flash another rom on the device, but i don't want to try until i haven't got a recovery option. If someone can help me, it would be nice! (I installed goomanager and i can enter to cwm recovery mode from it, but if i would like to flash the cmw to the phone, idk which version sould i choose)
The device is already rooted, with this tutorial: http://forum.xda-developers.com/showthread.php?t=1872072 (the webtrickz one)
2. If do you now any other method to backup and restore my ROM it would be good to me! I found a tool called Smart Phone Flash tool. I think it can do it, but i don't know how. Correct me if this program has other purposes.
(If anyone has some patience and would like to help me, you can add me on msn or skype by kanduur_patrik[.-at-.]hotmail.com thanks!)
patrik2991 said:
Hi!
1. I would like to flash ClockworkMod Recovery (or any other recovery method) on my Tianji i9220 device, because the phone hasn't got too many features, if i push volume+ +power button the Factory menu has only tests and reboot option, but i would like to flash another rom on the device, but i don't want to try until i haven't got a recovery option. If someone can help me, it would be nice! (I installed goomanager and i can enter to cwm recovery mode from it, but if i would like to flash the cmw to the phone, idk which version sould i choose)
The device is already rooted, with this tutorial: http://forum.xda-developers.com/showthread.php?t=1872072 (the webtrickz one)
2. If do you now any other method to backup and restore my ROM it would be good to me! I found a tool called Smart Phone Flash tool. I think it can do it, but i don't know how. Correct me if this program has other purposes.
(If anyone has some patience and would like to help me, you can add me on msn or skype by kanduur_patrik[.-at-.]hotmail.com thanks!)
Click to expand...
Click to collapse
Just before I begin, Patrik: would you understand written German for the some of the links that made me understand the Flash Tool are German?
And do you still need help on flashing CWM Recovery on your Tinji?
Flashing CWM recovery on a Tinji GT-i9220 MTK6577
patrik2991 said:
Hi!
1. I would like to flash ClockworkMod Recovery (or any other recovery method) on my Tianji i9220 device, because the phone hasn't got too many features, if i push volume+ +power button the Factory menu has only tests and reboot option, but i would like to flash another rom on the device, but i don't want to try until i haven't got a recovery option. If someone can help me, it would be nice! (I installed goomanager and i can enter to cwm recovery mode from it, but if i would like to flash the cmw to the phone, idk which version sould i choose)
The device is already rooted, with this tutorial: http://forum.xda-developers.com/showthread.php?t=1872072 (the webtrickz one)
2. If do you now any other method to backup and restore my ROM it would be good to me! I found a tool called Smart Phone Flash tool. I think it can do it, but i don't know how. Correct me if this program has other purposes.
(If anyone has some patience and would like to help me, you can add me on msn or skype by kanduur_patrik[.-at-.]hotmail.com thanks!)
Click to expand...
Click to collapse
Well, you know what, you might as well forget about the German
1.) download the flash tool here: http://sdrv.ms/SVnuBD to the folder c:\users\[your username]\SP_Flash_Tool_v3.1.222.00
2.) run c:\windows\System32\hdwwiz.exe.
3.) choose "Choose hardware manually from a list"
4.) choose "Show all devices"
5.) choose "Disk..." , point to the c:\users\[your username]\Downloads\SP_Flash_Tool_v3.1.222.00\MTK6577 VCOM USB Driver\usb2ser_Win7_864.inf
6.) choose "MediaTek PreLoader USB VCOM Port"
7.) accept to install a non-signed driver even if Windows warns you to do it
8.) remove your Tinji's battery
9.) run the flash tool
10.) click on "Scatter-loading" and open the "MT6577_Android_Scatter_emmc" scatter file
11.) untick "BOOTIMG" and "ANDROID", double-click on "RECOVERY"
12.) choose the "cwm_recovery.img" file
13.) click on "Download"
14.) ignore the "Download Warning"
15.) re-insert the battery, press "Vol Up" [or "Vol Down"]on your Tinji and connect it with the computer
16.) the flash tool should start flashing the modified recovery.img, you might keep pressing "Vol Up", it's not necessary, but anyway the flashing doesn't take long
17.) done!
You can now restart your Tinji anytime you want in recovery, either from Goo Manager or from ROM Manager (funnily enough, pressing "Vol Down" on starting the phone didn't work anymore lately).
Whenever you need your original ("Android system recovery <3e>") recovery, you'll find it under c:\users\[your username]\Downloads\SP_Flash_Tool_v3.1.222.00\recovery.img to re-flash it. [Edit 4/12/12: does for some reason not seem to work, AC]
If there's still problems on installing the driver under 6.) and/or you are running Windows other than 7 or 8 and/or other than x64 [64 bit], let me know.
In case of any other problems, feel free to ask!
Thank you!
I will try it, do you know which roms working well with this phone?
Tinji GT-i9220 custom ROMs
patrik2991 said:
Thank you!
I will try it, do you know which roms working well with this phone?
Click to expand...
Click to collapse
Hey Patrik,
as far as I know there's only one.
Try here: http://forum.xda-developers.com/showthread.php?t=1885919 and then you'll find the link in post #5.
Alex
TWRP recovery for our Tinji!
patrik2991 said:
Hi!
1. I would like to flash ClockworkMod Recovery (or any other recovery method) on my Tianji i9220 device, because the phone hasn't got too many features, if i push volume+ +power button the Factory menu has only tests and reboot option, but i would like to flash another rom on the device, but i don't want to try until i haven't got a recovery option. If someone can help me, it would be nice! (I installed goomanager and i can enter to cwm recovery mode from it, but if i would like to flash the cmw to the phone, idk which version sould i choose)
The device is already rooted, with this tutorial: http://forum.xda-developers.com/showthread.php?t=1872072 (the webtrickz one)
2. If do you now any other method to backup and restore my ROM it would be good to me! I found a tool called Smart Phone Flash tool. I think it can do it, but i don't know how. Correct me if this program has other purposes.
(If anyone has some patience and would like to help me, you can add me on msn or skype by kanduur_patrik[.-at-.]hotmail.com thanks!)
Click to expand...
Click to collapse
Now there's even Team Win Recovery Project out for our Tinji!
It's right here:
http://sdrv.ms/Xya8gA
Big thanks go out to javum from forum.china-iphone.ru!
hello, I'm Italian, sorry for my bad english ...
I have a tinij i9220 (rooted) and I would like to load the recovery, I downloaded your TWRP, which contains the file recovery.img. To load it on my tinij, I use a tool that I found in the market: mobileuncle Tools, in the menu of the application, there is a function to overwrite the stock recovery: Recovery Update. In this way it would be easier than using SP FLASH TOOL.
you think it's dangerous? I DO NOT HAVE THE BACKUP of my phone.
thanks for everything.
Massimo
SP Flash Tool
maxim2000spa said:
hello, I'm Italian, sorry for my bad english ...
I have a tinij i9220 (rooted) and I would like to load the recovery, I downloaded your TWRP, which contains the file recovery.img. To load it on my tinij, I use a tool that I found in the market: mobileuncle Tools, in the menu of the application, there is a function to overwrite the stock recovery: Recovery Update. In this way it would be easier than using SP FLASH TOOL.
you think it's dangerous? I DO NOT HAVE THE BACKUP of my phone.
thanks for everything.
Massimo
Click to expand...
Click to collapse
Hey Massimo,
I'm German sorry for my bad Italian...and for your prime minister too, hehe...
I just don't know about mobileuncle - the screenshots were all Chinese, I never downloaded it.
Became addicted to SP Flash Tools - you might notice my signature
First thing I did I backed up my phone - did not work for the recovery which I don't need anymore anyway but worked fine for the system.img and boot.img.
Have bricked my phone since then a hundred times and SP always made my day saving me in the end.
I think it's dangerous to not have a backup. But not for you as have have *my* backup (of system.img + boot.img) which you might download at any time.
I never wrote what happened after installing TWRP - I like it very much, and it's easier than Clockworkmod and it has touch screen functionality and I knew it from my ZTE Skate before but - believe it or not it does not work with the fact that the Tinji has an internal SD card.
I mean maybe I just did not find the option, but I backuped (on the internal SD card) and then was unable to restore for TWRP couldn't find the internal SD much different than Clockworkmod.
So I reflashed Clockworkmod and keep sticking to it ever since.
Have fun,
Alessandro
thanks for the quick reply, so you advise me to use SP FLASH TOOL and CWM, right? To do my first backup I first load the CWM, I do not think there is a way to backup without CWM ...
See you soon
maxim2000spa said:
thanks for the quick reply, so you advise me to use SP FLASH TOOL and CWM, right? To do my first backup I first load the CWM, I do not think there is a way to backup without CWM ...
See you soon
Click to expand...
Click to collapse
Well, how would you get the CWM on the phone if not with SP Flash Tool?
By just downloading the ROM Manager from Google Play - that was my idea, did not work
Me, I recommend SP, but that's strictly personal.
Whenever you flashed the CWM recovery, you can happily start backuping!
Alex
Hi Alex, I tried to download your Flash SP Toll unsuccessful, you can check your skydrive? Thank you and good evening.
Massi
SP Flash Tool
maxim2000spa said:
Hi Alex, I tried to download your Flash SP Toll unsuccessful, you can check your skydrive? Thank you and good evening.
Massi
Click to expand...
Click to collapse
Hey Massimo,
I'll re-pack it and send it to you by private message.
If not, you can find it on the net - I downloaded it from www.chinamobiles.org which is 1.) German and where 2.) you have to be a member.
Alex
---------- Post added at 09:46 PM ---------- Previous post was at 09:29 PM ----------
maxim2000spa said:
Hi Alex, I tried to download your Flash SP Toll unsuccessful, you can check your skydrive? Thank you and good evening.
Massi
Click to expand...
Click to collapse
Hmm, either I'm totally dumb or one can just not send attachement with private messages!
Anyway, here it is.
[There's an 11,81 MB maximum for *.zip uploads. This will never work. What a mess]
Alex
you can send to my account : [email protected]
Thanks
maxim2000spa said:
you can send to my account : [email protected]
Thanks
Click to expand...
Click to collapse
Just to let everyone know, I did.
And I sold my Tinji, from now on all is written from memory.
Alex
Sent from my e1911_v77_gq2000_a41_6628_v20 using xda app-developers app
Anyone can help will be very much appreciated.
It is this model = http://www.lelong.com.my/zte-v793-a...alcatel-hidamari-129512382-2014-05-Sale-P.htm
I also have this phone and still looking for a working method to root it. Please share the info if you know. Thank you.
ZTE V793 rooted
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
zte v793
kokokranc said:
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
Click to expand...
Click to collapse
1. Can u teach me how to root zte v793 step by step and give also download link?
2. I also have another problem : after update zte v793 my phone keep restarting...
kokokranc said:
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
Click to expand...
Click to collapse
Hi
Can you teach us step by step to root zte v793 and the link to download the software you use.
kokokranc said:
rooted my zte v793 successfully
i used the SP Flash tool to obtain scatter file and use that file to modify CWM from zte blade using MTK Droid tools. Then i flash the recovery image to the phone using SPF tool.
then using CWM, i flashed Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip to the phone.
Then i use Link2SD and partitioned my sdcard to offload files from the meagre 100MB limitation
i will put the detailed procedure and the customised CWM for v793 if that's needed so you don't have to mess around with those files.
thanks
Click to expand...
Click to collapse
edit: I also in need of usb driver for this phone because whenever I switch off phone for Flash tool, my XP laptop always ask for drivers of which I don't have.
Thank you in advance. I'll wait for your files and guidance to do it. :good:
Dear all,
my method ultimately becomes obselete now. to root, you can just use one of these 2 methods:
1. Ishuaji
2. e-root
the supersu included is in chinese, so you might need to flash CWM to change to english supersu.
as for flashing CWM, you can find tutorials using Mobileuncle.
thanks!
First, disclaimer:
WE TAKE NO CREDIT FOR ANY WORK THAT COMES ASSOCIATED WITH THESE BUILDS UNLESS SPECIFIED OTHERWISE. THANKS FOR KEEPING THINGS OPEN!
OFFICIAL DISCLAIMER
PHP Code:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about this custom CWM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
All the files needed are in this google drive folder:
https://drive.google.com/folderview?id=0BzFjevWXftUyY3RQUlZjZ2s1QjA
Detail of files:
1. zte_mtk6573_drivers_cdc+vcom+adb_v1.1136.0.zip
USB VCOM driver. needed when you want to flash the phone (This is when you strip the battery off the phone and connect it to USB). this driver is unsigned, so for win8 users, pls google how to install unsigned drivers.
2. SP Flash Tool v3.1216.05.7z
Flashing tool. you need this to flash the custom CWM attached.
3. MT6575_Android_scatter.txt
Device-specific memory map. we need this to tell SP flash tool where to put the custom CWM when flashing.
4. ZTE-V793_130615__recovery_130802-123951.img
Custom CWM generated from my phone (ZTE V793) bought from Happy Mobile (DiGi) under SKMM package.
DISCLAIMER: this is generated from my phone's settings and intended only for my phone's usage. I will not be responsible for any damage caused by your act of flashing this file onto your phone.
I successfully generated the file using the tutorial from a russian site
http://forum.china-iphone.ru/viewtopic.php?p=496116#p496116
also an xda tutorial here
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
You can generate your own CWM using tutorials above, but if you agree with the disclaimer, you can use the custom recovery attached. With no warranties, of course.
5. Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip
The rooting tool to be installed by our custom CWM to the phone to obtain root
Click to expand...
Click to collapse
Method:
This can be divided into several process:
1. Download all related files
2. Install Driver
3. Flash custom CWM
4. Install Root & Busybox zip file using CWM
Click to expand...
Click to collapse
1. Download all related files
Pretty self explanatory. Download and extract all files.
First, download and install USB Driver:
http://www.mediafire.com/download/f7h1f7i7skggmtg/ZTE+Driver.rar
2. Install Driver
We need 2 drivers to be installed:
- ZTE_Handset_USB_Driver.exe
- JoinMe_for_Android.exe
the Joinme driver is needed when flashing custom CWM. However, it didn't work for me. so I installed zte_mtk6573_drivers_cdc+vcom+adb_v1.1136.0.zip manually. To install it, remove battery from phone, connect to usb. Wait for computer to start searching for drivers, select Browse for drivers and select the vcom drivers downloaded.
3. Flash custom CWM
1. Open Flash_tool.exe from SP Flash Tool v3.1216.05 folder extracted earlier.
2. Click "Scatter-loading". Select "MT6575_Android_scatter.txt" that you downloaded earlier.
View attachment 2159248
3. Click to deselect ALL checkboxes in the list. ONLY TICK RECOVERY.
View attachment 2159266
4. Double click on the word RECOVERY and select "ZTE-V793_130615__recovery_130802-123951.img" downloaded earlier
View attachment 2159267
5. Click Download. A warning will pop up "Not ALL images are correctly loaded blah blah blah". just click Yes.
View attachment 2159283
6. If you see below the application, it will say "Searching" next to NAND. Time to plug in your phone. DON'T FORGET TO REMOVE THE BATTERY BEFORE PLUGGING IN YOUR PHONE.
View attachment 2159284
View attachment 2159285
7. Now you're done flashing, it's time to boot into CWM. Unplug the phone from USB. Put on battery. Press Vol+ & Power Button simultaneously. When ZTE logo appear, RELEASE ALL BUTTON.
8. Let's hope you boot straight into CWM
If you have this, then CONGRATULATIONS! you are now a step away from root!
4. Install Root & Busybox zip file using CWM
1. Copy the "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" onto the root of SD Card on your phone as normally you would (I wouldn't elaborate since this is android 101 knowledge)
2. Boot into Clockworkmod (CWM) recovery. To do this, turn off your phone normally. 5 seconds after the phone vibrates (fully off), press volume up (vol+) and power button. Wait until ZTE logo appears, then release both buttons.
If you do this correctly, you will see "CWM v 5.5.0.4 for ZTE V"
to navigate, use volume up (vol+) & volume down (vol-). to select, use power button.
3. Select "install zip from SD CARD" > "Choose zip from sdcard" > Look for "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip". REMEMBER: Navigate using volume button, select using power button.
then, confirm by selecting "Yes - Install Root_Superuser_" and pressing power button.
when completed, go back to main menu and select reboot.
if nothing goes wrong, you will see SuperUser and busybox icon in your App drawer.
UPDATE:
12082013 - finished 4th item - install root & busybox
todo - revise SP Flash tool version
kokokranc said:
4. Install Root & Busybox zip file using CWM
Can I continue next time? wow, doing this is such a pain. i never knew that. kudos to all the gurus who are willing to spend their time making guides and walkthroughs.
thanks
Click to expand...
Click to collapse
Hi kokokranc..appreciate if you could continue
Will Try
kokokranc said:
First, disclaimer:
If you have this, then CONGRATULATIONS! you are now a step away from root!
4. Install Root & Busybox zip file using CWM
Can I continue next time? wow, doing this is such a pain. i never knew that. kudos to all the gurus who are willing to spend their time making guides and walkthroughs.
thanks
Click to expand...
Click to collapse
want to try it after buaka puasa :laugh:
error
got this error
maybe it because my pc just detects then undetects preloader drivers
my phone cannot power after format using spf tools
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Cannot On
pendaflour said:
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Click to expand...
Click to collapse
same here
saifudinbesoot said:
got this error
maybe it because my pc just detects then undetects preloader drivers
Click to expand...
Click to collapse
When the red bar reaches 100% just disconnect and reconnect phone before timeout.
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 02:54 AM ---------- Previous post was at 02:49 AM ----------
pendaflour said:
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Click to expand...
Click to collapse
saifudinbesoot said:
same here
Click to expand...
Click to collapse
Log file from spf tool?
Sent from my GT-I9500 using xda app-developers app
thanks bro
all success after i use latest Flash_tool.exe from SP Flash Tool
it also solve this guy prob bec mine also like him
saifudinbesoot said:
got this error
maybe it because my pc just detects then undetects preloader drivers
Click to expand...
Click to collapse
pls continue to Install Root & Busybox zip file using CWM
sadmanex said:
thanks bro
all success after i use latest Flash_tool.exe from SP Flash Tool
it also solve this guy prob bec mine also like him
pls continue to Install Root & Busybox zip file using CWM
Click to expand...
Click to collapse
do u manage to get into CWM like the last screenshot above?
Sent from my ZTE V793 using xda app-developers app
Error 8038
Please help, my phone is still OK, can ON, but I got this error. I've tried another version of SP Flash Tool but still got the same error..
Root Success
kokokranc said:
First, disclaimer:
WE TAKE NO CREDIT FOR ANY WORK THAT COMES ASSOCIATED WITH THESE BUILDS UNLESS SPECIFIED OTHERWISE. THANKS FOR KEEPING THINGS OPEN!
OFFICIAL DISCLAIMER
PHP Code:
Code:
#include
/*
* Your warranty is now void.
*
.
.
.
.
[COLOR="Red"][B]4. Install Root & Busybox zip file using CWM[/B][/COLOR]
Can I continue next time? wow, doing this is such a pain. i never knew that. kudos to all the gurus who are willing to spend their time making guides and walkthroughs.
thanks[/QUOTE]
Of course you can. Btw, I successfully root my phone using your recovery.img and scatter file. The only thing I need to change is SP Flash Tool. I downloaded new version SP_Flash_Tool_v3.1224.01, because your provided version doesn't work for me.
Anyway, thank you very much for all the files.
Click to expand...
Click to collapse
kokokranc said:
do u manage to get into CWM like the last screenshot above?
Sent from my ZTE V793 using xda app-developers app
Click to expand...
Click to collapse
yes
and can on/start my phone normally
just use new SP_Flash_Tool_v3.1224.01 (download at softpedia)
cannot on phone
some have link to download PRELOADER image?plzzz share...my phone cannot on after flash format...
saifudinbesoot said:
same here
Click to expand...
Click to collapse
pendaflour said:
TQ for your full tutorial but i having problem after formating using spf tools....my phone zte v793 cannot turn on...can u help me plzz...
Click to expand...
Click to collapse
remove your battery and replace it again, and then turn on. I got the same problem back then and those steps worked for me.
So. I deceided to join this forum in order to ask for some help from all those people I saw while searching the net.
I have to admit I am quite a noob with mobile systems, although I have gone way too far the last 3 days!
Here is the problem: I have an mt6575 processor phone in which want to add Greek Language settings. I have downloaded a folder form the manufacture's site, but it didn't contain any instructions. Just some .bin files (ALICE.BIN VIVA.bin, SANSTAR50_6464_11B_BOOTLOADER_V005_MT6250_MAUI_11B_W11_32_SP_V1.bin and ZIMAGE_ER.bin)and a scatter file that can not be read by flash tool (scatSANSTAR50_6464_11B.txt).
After a lot of reading around here and a lot of other forums and sites I realised that in order to do anything, I had to root my phone. I wasn't able to do it through superclick or mtk droid tools so I followed the instructions I found here:
http://forum.xda-developers.com/showthread.php?t=2160490&styleid=18
However, I am stuck on the final step.. I can't seem to get my phone on cwm mode... In fact I am not sure I know what exactly this is. I manage to open my phone on the android recovery utility but I am not able to make any choice. Everytime I press some of the menu's choises an android robot with an exclamation mark fills the screen and nothing happens...
Anyway..even if I manage to finalize the rooting process.. I still don't know what to do with the files I have... should I use them somehow on flash tool?
By the way.. The files come with a tool called Multiport Download Flash Tool which looks like Sp flash tool but has too many port options.
I'd be glad if someone helped me with this!
Thank you in advance,
Irene
1. Dump your stock recovery image then make a cwm or twrp (preferably twrp) from yueweng's thread for mediatek devices via old cwm or twrp port tool
2. Flash it via sp flash tool (download MTK 6575 scatter from internet)
3. Then reboot into recovery and if in twrp then reboot and it will ask you to root it or not
Or
If in cwm then download supersu Flash zip file and flash it
You have root access now
Press thanks if helped
Please help me I want to install custom recovery on my karbonn titanium MACHFIVE.
This phone running on lollipop 5.0. & it have MediaTek MT6582 1.3 GHz Quad-core processor
&2GB of RAM & 16GB internal memory.
have you rooted your fone
need root
i know machfive is new in the market but really need at least rooting method for it cause it have some bugs though pls pls pls developers we are relaying on you for this
Yes
farhanfarhan32 said:
have you rooted your fone
Click to expand...
Click to collapse
I have rooted phone.
I root with kingroot
mukulkumars13 said:
I have rooted phone.
I root with kingroot
Click to expand...
Click to collapse
kingo root does not worked for me
Use iroot it worked for me
Need recovery for it man..... Xposed is also need to flash zip n i dont hav recovery damn!!
ajju akm said:
Use iroot it worked for me
Click to expand...
Click to collapse
kingo root , iroot , towel root, every thing failed:crying::crying:
I just rooted with iroot windows application.
ashish128 said:
I just rooted with iroot windows application.
Click to expand...
Click to collapse
which version of iroot you used?
root with kingroot
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
ajju akm said:
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
Click to expand...
Click to collapse
king root 4.0 worked:laugh:
farhanfarhan32 said:
king root 4.0 worked:laugh:
Click to expand...
Click to collapse
Hi
Just bought this phone for my friend. While trying to root with kingroot v4 and 4.5 its does not works.. Can u tell me ur frmware version number ?
Is there any recovery for this phone Karbonn Titanium Machfive.
Thanks in advance.
Sent from my MACHFIVE using Tapatalk
phone stuck in boot loop after kingroot 4.5. what to do?
model karbonn mach five.
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Kingroot 4.0 worked. Rooted successfully
Sent from my MACHFIVE using Tapatalk
Recover KARBONN TITANIUM MACHFIVE
rockybilla007 said:
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Click to expand...
Click to collapse
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
greentoy said:
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
Click to expand...
Click to collapse
Sir thank you so much for replying have been waiting for weeks for the solution..
1)Downloaded the files
2)Installed drivers
3)Started flash tool and loaded scatter file
4)Clicked on download
5)Powered off phone and connected via usb
6)Flashing process started
7)Flashing finished and green ring appeared!!!
8)Device booted after some time.
Thanks again for the solution :good::good::good:
Thanks for the guide.
Did anyone made custom recovery for this phone yet. If anyone has a recovery kindly share here.
Sent from my MACHFIVE using Tapatalk
Since there is no way to root this phone using known root apps or MTK Droid Tools (which won't even make proper scatter file) is there at least some CWM / TWRP available? MTK DT says there is a way to root this phone from CWM but I have no idea where to look for it. I found something for Doogee x5 which has MT6580 (without M) but I'm afraid of doing it, I'm not sure how much different MT6580 and MT6580M are
keminekoo said:
Since there is no way to root this phone using known root apps or MTK Droid Tools (which won't even make proper scatter file) is there at least some CWM / TWRP available? MTK DT says there is a way to root this phone from CWM but I have no idea where to look for it. I found something for Doogee x5 which has MT6580 (without M) but I'm afraid of doing it, I'm not sure how much different MT6580 and MT6580M are
Click to expand...
Click to collapse
Root it with the KingRoot app. Don't forget that you must turn USB Debugging on BEFORE you attempt to root it. Once it is rooted, leave USB Debugging on. Also, you should then install Busy Box X from the Play Store. Run Busy Box X and elect to install the busybox.
Then install Flashify from the Play Store. Flashify will not work properly unless you completed the installation of busybox in the system. With Flashify, you can back up the stock boot image (also referred to as the kernel image) and the stock recovery image. Save a copy of the back up files on your computer for safekeeping.
Then go back to MTK Droid Tools (make sure USB Debugginh is still on). Now select the Root, Backup, Recovery tab. Then click on the big button that says "Recovery and Boot." This will make the custom recovery for you. During the process, you will be asked to select the boot image file. Just point to the backup you made of the BOOT image from Flashify.
When the MTK Droid is done its thing, you will now have a CWM recovery for your phone. You will find it in the subfolder called "recovery" under the MTK Droid Tools folder. You will also find a "boot patched" image. You can now flash the new CWM recovery image and the new boot image to your phone by copying those files to your SD card and using Flashify to flash the images. Be careful! Do not make a silly error such as flashing the recovery image to the boot partition or you will soft-brick your phone. Flash recovery image to recovery and boot image to boot.
Don't forget to thank me by clicking the Thanks button if I have helped you. And feel free to follow up with any questions.
I'd like this to be so easy but any root app either PC or android version is failing to root this phone. Only SRSROOT is showing that phone is rooted successful but of course it's not true. I checked with Root checker and it says that root it's not properly installed and SU won't install since there is no root at all.
Also MTK Droid Tools won't detect my chipset in 100%. Won't let me root it there or show those tabs you mentioned. Someone somewhere said that MT6580 isn't fully supported yet and I guess it's true. I can modify config files so program will detect my phone that's why I could use option to make scatter file (which wasn't right one anyway).
Guess I will have to wait little longer to finally get root and recovery for this phone. But it's kinda strange that there is no way to actually root MT6580M but DOOGEE x5 with MT6580 has cwm and root already. I was thinking of using this DOOGEE things to root my phone but at the end I passed. Not worth bricking my only phone.
No way to root lenny2 with KingoRoot...
I´m looking forward to use my Lenny 2 with CM or MIUI... but i think.... it´s only a dream...
Echse27 said:
No way to root lenny2 with KingoRoot...
I´m looking forward to use my Lenny 2 with CM or MIUI... but i think.... it´s only a dream...
Click to expand...
Click to collapse
Use the KINGROOT app. Read what is written CAREFULLY. It is not the kingOroot app. These are two completely different root apps. KingRoot will root you Wiko Lenny 2. KingoRoot will NOT. So, no, you don't have to keep dreaming. Just do it!
Sent from my Nexus 7 using XDA Free mobile app
Thank´s CVAngelo....
You´re right... i only tested the KingoRoot... Now i have tested the KingRoot App too, but also without success...
USB debugging is on but at this time there is no progress to root the lenny2... KingRoot says...
Also the PC-Variant is not successfull...
Firmware Flash Tool https://mega.nz/#!IVNiVRqC!Q4hNfgIqzeCxw3Hopy_jS7zovL1oGtop3Ip2pmpWgDI
Echse27 said:
Thank´s CVAngelo....
You´re right... i only tested the KingoRoot... Now i have tested the KingRoot App too, but also without success...
USB debugging is on but at this time there is no progress to root the lenny2... KingRoot says...
Also the PC-Variant is not successfull...
Click to expand...
Click to collapse
Sorry to hear that. In that case, you may have to do it the hard way.
Use MTK Droid to extract the scatter.txt file (assuming it can get a clear, meaningful scatter). Then use SP Flash Tool to read back a full ROM dump of the phone. Process the ROM dump with MTK Droid. During that process you can create the CWM for the phone. If you have the CWM recovery image, then flash it back to the phone using SPF. Finally, boot into recovery and flash the SuperSu v2.46 zip from your SD card and it should be fully rooted.
This whole process will take the major part of 2 hours. The key is getting the scatter.txt and CWM for the phone. If you are able to do it, post those two files so others can benefit.
Of course, all of this depends on whether the MTK 6580 chipset is compatible with MTK Droid and with SP Flash.
Anyone wanna volunteer check whether the phone works with MTK Droid and SP Flash...then giving the process a go if the compatibility checks out? There's always the risk of bricking the phone at the point you flash the custom recovery or when you install SuperSu from the zip. But you can easily revive it with the firmware backup you make with SP Flash.
Sent from my Nexus 7 using XDA Free mobile app
---------- Post added at 10:46 AM ---------- Previous post was at 10:37 AM ----------
hanuma said:
TWRP Recovery LENNY2 http://d-h.st/4xqq
Install using Flash Tool
Firmware Flash Tool https://mega.nz/#!IVNiVRqC!Q4hNfgIqzeCxw3Hopy_jS7zovL1oGtop3Ip2pmpWgDI
Click to expand...
Click to collapse
Well here it is folks...Hanuma has posted the TWRP for the phone! So no need to root the phone the hard way as indicated in my last post. Also, perhaps SP Flash is compatible with the phone (there is firmware and a flash tool provided in a link by Hanuma...not sure if that's SP Flash or some other flash tool). @hanuma...can you provide some clarity here?
So the EASY way to get root is to flash the TWRP recovery to the phone (you'll need the scatter.txt file to use with SP Flash...or use the flash tool cited by Hanuma). Once you flash this custom recovery, download the SuperSu v2.46 to your SD card, and install it from the SD. You should be fully and properly rooted after that.
Remember to first make a BACKUP of your ROM with the flash tool before anything else. This way, you can recover if you make a mistake.
Could someone please post the scatter.txt for the Lenny 2? And confirm whether the flash tool in that link is SP Flash. Good luck.
Sent from my Nexus 7 using XDA Free mobile app
I will give it a try...
I will report later...
hanuma said:
TWRP Recovery LENNY2 http://d-h.st/4xqq
Install using Flash Tool
Firmware Flash Tool https://mega.nz/#!IVNiVRqC!Q4hNfgIqzeCxw3Hopy_jS7zovL1oGtop3Ip2pmpWgDI
Click to expand...
Click to collapse
The second link is only a ROM-Build... i can´t find a flashtool or something looks like a tool... there are only *.img files for recovery, system, etc.... (screenshot attached!!!)
Where i can find a flash tool?
SP Flash Tool http://www.needrom.com/download/sp-flash-tool-v5-1424-00/
Drivers http://www.needrom.com/download/mtk-driver-auto-installer-v5-1453-03/
I flashed the recovery succsessfully first time but the touchscreen was without function... so i flashed the recovery a second time but the touch screen don´t react, too ... now i tested it the third time with the same result...
i can´t "swipe to allow the modification" of the TWRP... So the recovery is not permanent and i can´t flash the SuperSU.zip...
Echse27 said:
I flashed the recovery succsessfully first time but the touchscreen was without function... so i flashed the recovery a second time but the touch screen don´t react, too ... now i tested it the third time with the same result...
i can´t "swipe to allow the modification" of the TWRP... So the recovery is not permanent and i can´t flash the SuperSU.zip...
Click to expand...
Click to collapse
Do the volume buttons, home key, back button all not work?
Sent from my Nexus 7 using XDA Free mobile app
CVAngelo said:
Do the volume buttons, home key, back button all not work?
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
The only thing i can do is longpressing the powerbutton to shutdown the device... but no other things are working, no touch on screen, no buttons... nothing...
Echse27 said:
The only thing i can do is longpressing the powerbutton to shutdown the device... but no other things are working, no touch on screen, no buttons... nothing...
Click to expand...
Click to collapse
Not good! Why is nothing as easy as it should be? That's one reason I hate touch recoveries.
Well since you have all the stock firmware files for the phone, it should now be a trivial task to create your own CWM recovery. Just fire up MTK Droid Tools and connect your phone to the computer via USB cable (make sure USB Debugging is on).
When MTK sees your phone, simply click on the Root, Backup, Recovery tab and the big button (called Recovery and Boot) and MTK Droid will make the CWM recovery image for you. Make sure the little radio button marked "To choose the boot.img file" is checked. During the process, it will ask you to select the boot.img from that firmware folder. It needs that kernel to create the perfect custom recovery for your phone.
Then flash only the new CWM recovery to the phone using the SP Flash Tool, just as you did with the TWRP recovery. Once you've got CWM on there, you can flash the SuperSu zip (this CWM recovery uses only the buttons).
Please post the CWM recovery image, the stock recovery and the scatter.txt file after you've confirmed that it works. That way others on the thread can flash the CWM and root their phones without having to download the huge set of firmware files.
Sent from my Nexus 7 using XDA Free mobile app
Thank´s CVAngelo...
i will give it a try later... because my working machine blocks the .exe file with it´s virusdefinition...
So i have to use my virtual machine at home... nomally i only use ubuntu or debian...
So, i will give a report...
CWM Recovery https://mega.nz/#!JYEDgCKA!K_4WBt_1CQ6Wf21bdCTrmG4fxlFT-6gxVybc3_cQYfk
hanuma said:
CWM Recovery(Test) http://d-h.st/rBJv
Click to expand...
Click to collapse
I will test this one tomorror... Thank you hanuma...
Gesendet von meinem LENNY2 mit Tapatalk
Flashing the CWM file works problemless...
CWM and navigation with buttons works great too........but...... i have flashed the SuperSU_2.46 successfully.... after that the phone stucks on Bootlogo "LENNY2"... (i wait around 20min)
Nothing works after that, so i decides that it´s a goog idea to flash the hole rom V14 ... the device need a loog time to boot (ca. 15min) and now i have to rebuild my settings and apps... but thats ok...
Greetz
Echse
Echse27 said:
Flashing the CWM file works problemless...
CWM and navigation with buttons works great too........but...... i have flashed the SuperSU_2.46 successfully.... after that the phone stucks on Bootlogo "LENNY2"... (i wait around 20min)
Nothing works after that, so i decides that it´s a goog idea to flash the hole rom V14 ... the device need a loog time to boot (ca. 15min) and now i have to rebuild my settings and apps... but thats ok...
Greetz
Echse
Click to expand...
Click to collapse
That's great progress. At least you're back up and running! Good for you. After you're done rebuilding settings and so on, flash the SuperSu zip again. Then let us know if you're rooted.
Sent from my Nexus 7 using XDA Free mobile app