how to make korean Grand max lollipop firmware - Android Q&A, Help & Troubleshooting

First of all I'm so sorry about my broken English.
I am using galaxy grand max g720n0 (Korean Ver.)
Korean version is not on 5.1.1.(India Ver. is on lollipop)
So I want to use India version firmware. Booting was successful when I just leave boot.img, cache.img.ext4, recovery.img, system.img.ext
And everything works fine but no wifi, call, message, data network, no sound(not working speaker)
What can I do with this Kor and Ind firmware? can anybody help?

I want to know too . I also got a G720N0 and it still works on Android 4.4.4 can it update by ourselves?:crying:

Related

Need Firmware for Chinese Tab w/ Spreadtrum Chip&Board ID is S706 -MIPI V2.0 (SC5735)

Need Firmware for Chinese Tab w/ Spreadtrum Chip&Board ID is S706 -MIPI V2.0 (SC5735)
I've managed to find out the firmware for this tab on below link.. It Flashed successfully on my tab (Ikon model ik-787). But I don't see anything on display after flashing the firmware on my tab.... The Number YK150731128 Doesn't match with the board with the firmware I downloaded.. Can anyone please get me a firmware for this tab or tell me how to get my display working with this firmware????
The firmware that I've mentioned earlier downloaded from : http://yun.baidu.com/share/link?sha...06(5735)V2.0%20%20%E5%8D%95%E5%8F%B7150625081
Hello ! Try to flash Digma Optima Prime 3G TT7000PG
It works for me ( Texet 7896, board S706-MIPI V2.0 (SC5735) ), but the camera does not work
IKON-IK787 firmware
ikon ik-787 firmware original is available absolutely free.contact me at [email protected]. FREE.

How to install other region firmware on Galaxy Tab E SM-T560 - US 7.1.1 on EU 4.4.4

Hi,
I have a Norwegian Tab E 9.6 (SM-T560) with Kitkat 4.4.4.
The US/Canadian version SM-T560NU has got official upgrade to Nougat 7.1.1.
I have downloaded the XAC Canada version and I am trying to install it using Odin, without success.
I load the firmware file using the PDA file tab, but the installation will not go through. Connection ok, but odin stops either and NAND Write or earlier.
From what I understand it should be perfectly possible to install an official stock firmware from another region (I did so once on my asian Samsung S7 Edge), but not working here.
What could be the reason for this not working? Do I need to change CSC or something? If so how without rooting and without using the dialer code trick (as there is no dialer on a WIFI only unit).
Or some special settings in Odin? I only have the default settings marked.
I have tried many versions of Odin, from the latest to the earliest.
Please help or point me in the right direction.
messus

S9 plus G965N (South Korea sk) - how to flash Europe F and increase partition size

Hello everyone,
I have a south Korea:
Device spec:
S9 plus G965M with Exynos 9810 and says SK Telecom in the start but I think it's unlocked because I have my Portuguese sim card inside and it's working here in Portugal
Band name Ron : G965N KSU 1ARJ1
This
I've went thru a lot of threads but I got flooded with so many information that I'm afraid of the steps to do.
Main goal:
1. Use the phone in Europe / Portugal
2. Change the ROM because even with reset and English chosen, Android has a lot of menus in Korean
3. Even boot loader for Odin is Korean.
4. Install Android pie 9.0 and continue to receive updates. This phone is stopped in October patch. I think it won't update unless I put a Korean sim
Since the current official ROM 9.0 with oneUI and Pie is for 965F and not 965N (mine), and since N partition is smaller, where should I start or how?
10. Should I start with CSC change? Will that change partition also? To what CSC then?
11. Root? TWRP? Custom ROM?
12. I don't care about Samsung pay, but will I lose VoltLTE?
Thanks a lot for your time.
Hi folks,,,
At first excuse my language just plz try to keep up with me to get help
So I bought an used S9 plus Duos, inside its G965F...software info, build number its also G965F,, outside on the back G965F made in Vietnam,,, i discovered that's there is root and its on February security patch i tried to unroot it using Odin,,,the where i discovered its G965N!!!! Tried to continue by downloading official g965N firmware (pie 9) ... when the device restarted after using odin the phone working or showing just one sim even it was working just fine and even I used pie firmware its went back to oreo!!!
Plz ... Biiiig plz I need advices and solutions,,, I want to clean the root, I want to get updates ... and I want to get both of sim 1 and sim 2 work
Vapochilled said:
Hello everyone,
I have a south Korea:
Device spec:
S9 plus G965M with Exynos 9810 and says SK Telecom in the start but I think it's unlocked because I have my Portuguese sim card inside and it's working here in Portugal
Band name Ron : G965N KSU 1ARJ1
This
I've went thru a lot of threads but I got flooded with so many information that I'm afraid of the steps to do.
Main goal:
1. Use the phone in Europe / Portugal
2. Change the ROM because even with reset and English chosen, Android has a lot of menus in Korean
3. Even boot loader for Odin is Korean.
4. Install Android pie 9.0 and continue to receive updates. This phone is stopped in October patch. I think it won't update unless I put a Korean sim
Since the current official ROM 9.0 with oneUI and Pie is for 965F and not 965N (mine), and since N partition is smaller, where should I start or how?
10. Should I start with CSC change? Will that change partition also? To what CSC then?
11. Root? TWRP? Custom ROM?
12. I don't care about Samsung pay, but will I lose VoltLTE?
Thanks a lot for your time.
Click to expand...
Click to collapse
1: cool, super easy and it sounds like you got it taken care of anyways
2: it’s a Exynos processor, so you should be able to root it and throw whatever ROM you want on it
3: if it’s a Korean model it should accept a G965F firmware flash in Odin which isnt a korean bootloader, and even if its not compatible, Odin will just fail out on the flash unless you have the modded version of Odin that is designed to ignore version mismatch errors and flash anyways
4: manually update it with Odin and don’t fiddle with the carrier specific needs for updates
What happened to 5 through 9?? (kidding, I can read between the lines)
10: CSC stands for country specific product code, or something like that. It tells the phone what market it is supposed to be intended for
11: sure, if you want, but youll trip knox if you do. sure. if youd like to, youre welcome to do that
12: SPay can be wonky depending on your CSC, but voLTE is a firmware/carrier specific. I have a regular S9 that i purchased from Cricket (united states MVNO carrier) and it had voLTE when i got it, but i flashed the G960U1 firmware (the "U1" iteration is the snapdragon unbranded version) and voLTE and WiFi calling are now both gone from my menu
---------- Post added at 10:31 AM ---------- Previous post was at 09:46 AM ----------
oh, and youre not gonna change the partition size to anything bigger than it came with. When you Odin flash the firmware, it wont change the amount of internal storage available unless you inadvertently shrunk it with a firmware flash of a smaller storage base phone, which seems unlikely. This was more common in the standard 16gb internal storage days. If the internal storage amnt is incorrect after a firmware flash, factory reset it in stock recovery and that should correct the issue
Hesni said:
Hi folks,,,
At first excuse my language just plz try to keep up with me to get help
So I bought an used S9 plus Duos, inside its G965F...software info, build number its also G965F,, outside on the back G965F made in Vietnam,,, i discovered that's there is root and its on February security patch i tried to unroot it using Odin,,,the where i discovered its G965N!!!! Tried to continue by downloading official g965N firmware (pie 9) ... when the device restarted after using odin the phone working or showing just one sim even it was working just fine and even I used pie firmware its went back to oreo!!!
Plz ... Biiiig plz I need advices and solutions,,, I want to clean the root, I want to get updates ... and I want to get both of sim 1 and sim 2 work
Click to expand...
Click to collapse
I am suffering the same now... did u find the silution then? Pls help me bro
I.zubair said:
I am suffering the same now... did u find the silution then? Pls help me bro
Click to expand...
Click to collapse
Hello!
Im sorry to tell you that a I didnt find solution ?

baseband help request

at the origin, there was firmware HC 3.0.1 ver. XXKI1 (Vodafone).
later I downloaded original samsung firmware P7500XXLQ8_P7500OXALQ8_P7500XXLQ8_HOME.tar.md5 (4.0.4 ITV) and table works fine, I browse in 3G really fine.
later I needed Nougat, then I updated my device by following thread:
https://forum.xda-developers.com/ga...stable-7-1-setup-google-voice-bigger-t3768344
tablet is rooted, twrp 3.11 installed.
almost everything works fine, the modem hooks the carrier of Vodafone Italy but only in GSM mode and I can receive only SMS.
nothing to do for browsing in 3G.
does a solution exist to browsing in 3G with Nougat with Vodafone Italy?
does a nice person exist who suggests me a work-around, an engineering code to modify baseband or have I to resign?
thanks, thanks, thanks

Question Nord 2 Device model number changed to 2103, how can i change it to D2101?

hello,
I am using Nord 2 pacman edition (A.20) indian version(D2101) . recently i flashed pacman's firmware file with mtk client. Everyting was fine.
But recently i noticed that my device model number changed from D2101 to D2103.
i have Giovix92's backup zip file.
please help me , is there any way to change model Number without root??
The PacMan Firmware that you flashed was European so the only way to go back to 2101 would be to give up the pacman firmware until someone finds the indian pacman firmware

Categories

Resources