{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 13 for the Samsung Galaxy Tab 4 7.0 LTEBy Hennymcc and CTXz
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Before you start
This ROM is only for the T235 and T235Y
Code:
*
* Your warranty will be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
Special Thanks
@hennymcc For his huge effort and contributions on Exynos 3470 related devices
@tyktak For the testing
And of course the entire CyanogenMod team!
What is Fixed
Incoming Calls
Red flashy frames
Lock Screen
CM setup Wizard
Google Setup Wizard
RIL (SIM Detection)
Youtube
Videos
Wifi
What is not working
Auto Rotate stops working after some time
Unswitchable preffered networks (Stuck on 3g but actually LTE)
SElinux
Instructions
How to install CM 13
If you don't have TWRP yet, get it from here : TWRP 3.0.0 for Samsung Galaxy Tab 4 7.0 LTE
Download the ROM and the Gapps that are located below on to your device
Reboot into TWRP by holding VOL UP + POWER + HOME on boot
In case things go wrong make a backup
After the backup has completed return to home
WARNING : The next three steps WILL delete all your your data but not your internal storage
Select Wipe and then Advanced Wipe
Now ONLY tick Dalvik Cache, System, Data and Cache
After ticking those, Swipe below to wipe
Once the wipe has completed return to home
Select install and locate the ROM zip
After you selected the ROM select add more zips and select your Gapps zip
Finally swipe to install
When all of this is done, reboot into system, wait, and enjoy CyanogenMod 13 on your Galaxy Tab 4 7.0 LTE
How to ROOT
In CM 13, enable the developer options
Select Root access
Select Apps Only (Or Apps and ADB if you use ADB)
Done
Downloads
Lastest recommended CyanogenMod release for the Galaxy Tab 4 7.0 LTE T235 : ROM
All my releases can be found here : Android File Host
Gapps : Open Gapps
Questions and bug reporting
The following questions will be ignored
Inappropriate questions
Requests for other devices
Forced orders, EX. : "PLS FIX!!!!!!"
ETA's
Often repeated questions usually by the same user
Requests that are out of CM's framework (Ex. Adding Samsung Apps)
How to report a bug/issue
Explain exactly what happens
Mention a log if you can (Please use hastebin or any other paste site to keep the thread clean)
If you can't mention a log, explain as precise as possible when, why and where it occurs!
Change Log
Code:
2016/3/19
- Fixed incoming calls
- Synced to newest CM sources
2016/3/13
- Synced to newest CM sources
2016/3/13
- Fixed RIL (SIM detection)
- Updated to Lollipop Kernel
2016/3/10
- Fix Crash on CM and Google setup Wizzard
2016/2/28
- Switch from -eng to -userdebug
- Fixed Wifi
- Fixed CM Wizzard crash
- Fixed Lockscreen (Crash after entering sleep)
- Fixed Youtube Videos Crashing
- Fixed Videos freezing device
- Removed Flashy frames (By switching from -eng to -userdebug)
2016/2/27 - CM released
Screen Shots
XDA:DevDB Information
CyanogenMod 13 For Samsung Galaxy Tab 4 7.0 LTE, ROM for the Samsung Galaxy Tab 4
Contributors
CTXz, hennymcc
Source Code: https://github.com/cm-3470
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-02-27
Last Updated 2016-03-19
Reserved
Q&A
Q: Will this work on T2XX
A: This build is ONLY for the LTE variant of the 4 inch tab. I have not tried if this rom works on the T235Y (should probably work though). However the LTE version has an Exynos 3470 where else the Wifi version has a Marvell chip (I have some bad experience with that chip *cough* attempt to get CM working on it *cough*). PLEASE DO NOT TRY TO FLASH THIS ON ANY OTHER DEVICE THAN THE T235 OR T235Y.
Q: What about the T230!!!
A: As mentioned in my TWRP thread. Sub77 will send me a T230, and I can give it a shot again to build at least CM11 on it.
Q: How long till <insert issue here> gets fixed
A: ETA's (Short for Estimated Time of Arrival) aren't tolerated that well on XDA. Please remember that this is only a hobby!
Reserved
Looking forward to run this on my SM-T235. Only if it isn't Monday tomorrow, i would test run this ROM.
New build released, links have been updated!
Code:
2016/2/28
- Switch from -eng to -userdebug
- Fixed Wifi
- Fixed CM Wizzard crash
- Fixed Lockscreen (Crash after entering sleep)
- Fixed Youtube Videos Crashing
- Fixed Videos freezing device
- Removed Flashy frames (By switching from -eng to -userdebug)
If RIL isn't working yet, i assume one won't be able to make call. Correct?
Gandicela said:
If RIL isn't working yet, i assume one won't be able to make call. Correct?
Click to expand...
Click to collapse
Not via phone, however you can call via wifi (skype etc)
I have been looking forward to this ROM for a while and I really appreciate your effort in this. Thank you very much!
Flashed it and deleted the setupwizard.apk as suggested but the CM setup wizard still crashes after pressing skip on "SIM card missing" tab. Any suggestions how to bypass this?
Any possibility for kernel with overclocking CPU and GPU functions for our tab?
Raido182 said:
I have been looking forward to this ROM for a while and I really appreciate your effort in this. Thank you very much!
Flashed it and deleted the setupwizard.apk as suggested but the CM setup wizard still crashes after pressing skip on "SIM card missing" tab. Any suggestions how to bypass this?
Any possibility for kernel with overclocking CPU and GPU functions for our tab?
Click to expand...
Click to collapse
Hey, i'll fix that issue in my next build, however I need to get my PC running again before I can start anything new
CTXz said:
Hey, i'll fix that issue in my next build, however I need to get my PC running again before I can start anything new
Click to expand...
Click to collapse
I'm patiently waiting, Mate. Quality work takes time. Thanks hugely for supporting our device.
So excited!
I have 2 SM-T230's for my boys, If you need someone to test something please let me know. (I am hoping that this will have the Marshmallow feature to use the SDcard as internal memory)
Thanks Andi
therealbroxy said:
I have 2 SM-T230's for my boys, If you need someone to test something please let me know. (I am hoping that this will have the Marshmallow feature to use the SDcard as internal memory)
Thanks Andi
Click to expand...
Click to collapse
Sorry mate, this thread is t235 only
CTXz said:
Sorry mate, this thread is t235 only
Click to expand...
Click to collapse
I know but...... you mentioned someone was sending you a 230, you might have time in the future, this might be the closest I get to seeing 6 on my Tab 7, A slim chance is still a chance! so I am still excited
I'm looking for someone to test my new build, my tester seems to be away at the moment, PM me if you're willing to test
CTXz said:
I'm looking for someone to test my new build, my tester seems to be away at the moment, PM me if you're willing to test
Click to expand...
Click to collapse
Is it for the 20160308 degaslte build? I've downloaded it and i try to find time to test tonight. Or is it another built?
Gandicela said:
Is it for the 20160308 degaslte build? I've downloaded it and i try to find time to test tonight. Or is it another built?
Click to expand...
Click to collapse
Hey, thanks but my tester returned, I'll update the OP
CTXz said:
Hey, thanks but my tester returned, I'll update the OP
Click to expand...
Click to collapse
No problem
I've dirty flashed the actual build over last lp build by hennymmc. Generally the last build works well but ril doesn't work with boh7 baseband. The camera preview hang up after taking a photo. If you take a new picture, the photo shows in gallery but the preview doesn't work.
New build released, links have been updated
Code:
2016/3/10
- Fix Crash on CM and Google setup Wizzard
CTXz said:
New build released, links have been updated
Code:
2016/3/10
- Fix Crash on CM and Google setup Wizzard
Click to expand...
Click to collapse
@CTXz
Thanks very much indeed for this ROM. It's running good, however i just want to point out 2 really minor things (aside from the RIL stuff).
1. Sensitive notification drawer, as from my hlte CM12.1, "Contents hidden" for any apps in the notification drawer
2. Quick unlock option inside Lockscreen menu
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Omni?
Omni Gerrit Review
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
This is only for the P605/P607T (Qualcomm) variants only, due to the SM-P600 having an Exynos SoC
Full list of supported variants:
Code:
[CENTER]*P605 - lt03ltexx
*P605M
*P605S
*P605V - lt03ltevzw
*P607T - lt03ltetmo[/CENTER]
ROM:
4.4.4 - omni-4.4.4-20150220-lt03lte-HOMEMADE.zip
5.1.1 (not stable for daily use) - https://www.androidfilehost.com/?fid=23991606952595910
Gapps: Whatever you can find. I personally use Banks Gapps
Omni only supports TWRP recovery, use any alternate recovery at your own risk.
Source
OmniROM Source
Kernel Source
XDA:DevDB Information
Omni for Galaxy Note 10.1 (2014), ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
jakew02, xplodwild
Source Code: https://www.github.com/omnirom/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Alpha
Created 2014-10-27
Last Updated 2015-05-04
Important Notes
Omni does NOT provide root by default. You MUST flash SuperSU in recovery for any type of root
Please direct QUESTIONS to the Q&A Thread (link at top) and DEVELOPMENT + BUG REPORTS, WITH APPROPRIATE LOGS here
Kitkat Version ONLY:
The Menu hardware key lights up as the notification led
The Back hardware key is the charging indicator
Reserved
A-w-e-s-o-m-e.
That's very interesting. I always wanted to try a stock or rather google inspired rom in my Note but was never given the chance. Your download links are down though, overloading my anticipation
edit: You write "all variants download here". Do you mean that you support both P600, P601 and P605?
Stevethegreat said:
That's very interesting. I always wanted to try a stock or rather google inspired rom in my Note but was never given the chance. Your download links are down though, overloading my anticipation
edit: You write "all variants download here". Do you mean that you support both P600, P601 and P605?
Click to expand...
Click to collapse
My server is currently down. I have the file locally, I am in the process of uploading to a temporary mirror as I type this.
This is ONLY for P605/P607T variants, I have updated the OP with a full list of the supported models.
OP Updated with a temporary mirror
Update:
Next beta will have reworked device trees and additional cpufreq features and updates
Gunna go pick up this tab today when tmobile opens will let you know how it went
Toneman07 said:
Gunna go pick up this tab today when tmobile opens will let you know how it went
Click to expand...
Click to collapse
I was able to root using towelroot and install twrp with TWRP Manager from jmz (a personal friend) before I left the T-Mobile parking lot :good:
jakew02 said:
I was able to root using towelroot and install twrp with TWRP Manager from jmz (a personal friend) before I left the T-Mobile parking lot :good:
Click to expand...
Click to collapse
Cool stuff just got back with mine installed twrp through odin and used SuperSU zip to root. Just downloaded and about to flash. Wanted to get a preloaded recovery first with all my normal apps. Thanks for the Rom look forward to it!
Everything is up and running. I had issues getting SuperSu - ended up having to reflash that through TWRP. The only thing i have noticed so far is the inability to take screenshots. I might be missing something - but i believe the only way was to hold down the button and touch the screen. Once i finish setting up i will check if the phone is even responding to spen button
Came across an interesting error couldn't use hangouts dialer to video call. Grant it I didn't test it on stock it worked on the tab 4 I had its not a necessity I was just trying to break things lol
Screenshot is volume down + power
Screen record is volume up + power
I know about the hangouts problem. Also I know that headphones don't work. I will fix it next chance I get. My professors are laying the papers and assignments on hard this past week (its the same thing I had to do for the note 3)
Also if you read the OP 2nd post you would see that I specifically stated that Omni does NOT include root or su binary by default.
Some good info:
A great tool for this is the app Syslog from the play store. If you have a bug, simply open the app and select the type of logs to collect. Just keep in mind that the logs must be collected after the bug and before a reboot (unless you're getting logs for a random reboot, in which case you would collect a last_kmsg). This app makes collecting logs as easy as its ever been :good:
jakew02 said:
Screenshot is volume down + power
Screen record is volume up + power
I know about the hangouts problem. Also I know that headphones don't work. I will fix it next chance I get. My professors are laying the papers and assignments on hard this past week (its the same thing I had to do for the note 3)
Also if you read the OP 2nd post you would see that I specifically stated that Omni does NOT include root or su binary by default.
Some good info:
A great tool for this is the app Syslog from the play store. If you have a bug, simply open the app and select the type of logs to collect. Just keep in mind that the logs must be collected after the bug and before a reboot (unless you're getting logs for a random reboot, in which case you would collect a last_kmsg). This app makes collecting logs as easy as its ever been :good:
Click to expand...
Click to collapse
Thanks for the info
I wanted to clarify on the supersu I originally flashed it with the rom and gaps first and it didn't take took a second flash to get it to work. As is its great for a daily thanks for the great work
Toneman07 said:
Thanks for the info
I wanted to clarify on the supersu I originally flashed it with the rom and gaps first and it didn't take took a second flash to get it to work. As is its great for a daily thanks for the great work
Click to expand...
Click to collapse
Ah, I see. For Omni, SuperSU was integrated into Settings if it's installed, there won't be an icon in the app drawer.
Tap Build Number a few times to enable Developer Options and you should see SuperSU above About Phone in settings :good:
Hello, i used the rom for 4 hours now on art runtime and sometimes the screen doesn't wake up/device is very laggy four 1 minute.... But the rest of the rom is fine i like it and i'm happy about your development
LukLak19 said:
Hello, i used the rom for 4 hours now on art runtime and sometimes the screen doesn't wake up/device is very laggy four 1 minute.... But the rest of the rom is fine i like it and i'm happy about your development
Click to expand...
Click to collapse
Dont use ART. Its not supported by Google and therefore isn't support by Omni, and therefore not by me either. CM has hacked up some stuff to make ART work but Omni isn't doing that.
Best results will be with dalvik and stock kernel
I've been using it on campus for the past few days to take notes during class and write papers and haven't had any issues.
I just saw that you uploaded an update. Could you provide a changelog, since the changelog page shows an error (Error: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)) ?
I know now why, because it doesn't boot atleast for me.
OberstGrausam said:
I just saw that you uploaded an update. Could you provide a changelog, since the changelog page shows an error (Error: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)) ?
I know now why, because it doesn't boot atleast for me.
Click to expand...
Click to collapse
A good rule of thumb: don't flash things i don't link to from the OP. :good:
Hi rom devloper
i was wondering if u could support the p600 for ur omni rom. Also, is it possible if i install the p605 rom on my p600 it will work.. i know that is the case for some roms.
thanx in advance
Shawn5162 said:
i was wondering if u could support the p600 for ur omni rom. Also, is it possible if i install the p605 rom on my p600 it will work.. i know that is the case for some roms.
thanx in advance
Click to expand...
Click to collapse
P600 is the QUALCOMM wifi-only variant, correct? If it is QUALCOMM then I can certainly look into it. Shouldn't be much more difficult than just removing the telephony and ril stuff
If it is Exynos there is no way.
The p600 is exynos but but I do know that many p605 roms work flawlessly on the p600... could u please try to support the p600
Thank so much for trying to help
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Kernel source code Github repo.
Device path for CM Github repo.
Vendor path for CM Github repo.
Downloads
ROM: Here
Google Apps: Here
What works?
Setup
Bluetooth
Data (2g, 3g and 4g)
Calling
Camera
Torch
Installation of Gapps
Known Issues
Tell me
Installation
Make a backup!
Install one of the recoveries found here
Reboot into recovery
Wipe data (You may get a "staus 7" error if you fail to wipe.)
[*]Install the ROM
[*]Install SuperSU
[*]Boot phone into normal mode, enable wifi.
[*]Reboot recovery
[*]Optionally install Gapps
Most of Android/CyanogenMod is licensed under the Apache License with other small parts licensed under other open-source licenses. Which means that you may modify and redistribute without asking for permission as long as the proper credits is given and it is not misappropriated as being the official CyanogenMod.
Thanks
- The CyanogenMod team for providing a great ROM. Without all the compatibility work which went into it, this ROM would've been much harder to make
XDA:DevDB Information
[ROM][GT-I9195I][UNOFFICIAL][4.4.4] CyanogenMod 11, ROM for the Samsung Galaxy S 4 Mini
Contributors
DroidKing18, Danil_e71
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2016-06-08
Created 2016-05-19
Last Updated 2016-07-14
Reserved
Changelog:
Testing v 1 (5/18/2016): Initial release
Beta v 1 (6/3/2016): Fixed external storage error, fixed Gapps error, fixed calling error, fixed camera error
Beta v 2 (6/8/2016): Added NFC, All app cache is saved in microSD, added FM radio, added auto brightness, video playing (not 720p)
The ROM is beta and works pretty well. There are a few bugs here and there, but the dev is busy killing them .
I would like to thank the community for donating enough money for the dev to get an i9195i
Also, I wanted to say that if you wanted to be added to the Viber group about this development, PM me with your phone number
@DroidKing18, good job for getting the ball rolling!
May I ask how much you require in order to purchase a GT-I9195I device?
Best of luck!
JimmyRay said:
@DroidKing18, good job for getting the ball rolling!
May I ask how much you require in order to purchase a GT-I9195I device?
Best of luck!
Click to expand...
Click to collapse
Thank you! (Although I didn't actually do the porting) .. The main dev requires around $200 to buy the phone. So far we haven't raised anything, but I'm hoping we will soon so we can get it bug-free.
Sent from my GT-I9195I using XDA-Developers mobile app
Okay, best of luck!
I believe it may be possible to purchase an unlocked GT-I9195I for a little less than that (e.g. Amazon: $180 new, ~$100 used), but I'm not sure where the main developer is based.
Cheers!
Ok, awesome, I'll check. He's based in Russia. Thanks
Sent from my GT-I9195I using XDA-Developers mobile app
i bought my phone for 130,- EUR from here http://www.amazon.de/gp/offer-listi...LikeNew?ie=UTF8&f_new=true&f_usedLikeNew=true - but i don't know it is possible to send to russia?
In order to choose the right Gapps.
Our phone has ARM platform or x86?
Sorry Im spamming that much.
gb_12 said:
In order to choose the right Gapps.
Our phone has ARM platform or x86?
Sorry Im spamming that much.
Click to expand...
Click to collapse
Arm, SoC Qualcomm Snapdragon 410
---------- Post added at 07:26 AM ---------- Previous post was at 07:24 AM ----------
danoiz said:
i bought my phone for 130,- EUR from here http://www.amazon.de/gp/offer-listi...LikeNew?ie=UTF8&f_new=true&f_usedLikeNew=true - but i don't know it is possible to send to russia?
Click to expand...
Click to collapse
Delivery to Russia will also cost money. So the phone will cost about 200 usd here in Russia, i can buy new one here for 200 usd.
so i tested the rom (ok the boot animation ) but the volume button are in function "yeah" i still waiting for the next build, how can i help you except with a donation
danoiz said:
so i tested the rom (ok the boot animation ) but the volume button are in function "yeah" i still waiting for the next build, how can i help you except with a donation
Click to expand...
Click to collapse
next build will be today's evening
OyyO said:
next build will be today's evening
Click to expand...
Click to collapse
ok - I'm curious :good:
thank you for rom
Hi all)i'm know about error(com.android.phone). Now i'm making some changes and will be upload update.
Danil_e71 said:
Hi all)i'm know about error(com.android.phone). Now i'm making some changes and will be upload update.
Click to expand...
Click to collapse
update ?
sezerkoc28 said:
update ?
Click to expand...
Click to collapse
There was an update yesterday that was tested, and also didn't work. A new update will come soon
We are able to do a language change.
If you "Pull down" the screen at the top, you can see "residuals" from the Dual Sim version still there, on the bottom of the screen.
Indications are that nothing is recognised yet. neither Sim or Internet.
System "Setup Wizard" stops before anything has happened.
Pressing OK leaves the screen blank except for the notification bar with the numbers 1 2 and circular battery indicator at top right go screen.
Be aware that, this issue appears to be caused by the GApps package suggested being installed with the CM11 Zipfile which appears to halt the startup process after the Welcome Screen.
Installing CM11 without GApps is better and CM11 opens well.
What Works, and, what does NOT work yet.
What Works ( as far as I can tell ).
1 Setup to main screen.
2 Bluetooth Scanning for Devices
Pairing with Devices
Sending files to a Paired Device
3 Terminal app
4 Gallery - Photo View and Video playback.
5 Browser app
6 Phone app
7 Message app
8 Apollo app
9 Sound Recorder app
What does NOT work yet :-
1 SIM card recognition and AutoSetup
2 Telephony
3 Camera - cannot connect to camera.
4 Torch
Residuals to remove
Any references to a second SIM Card from :-
Pull down menu
Settings - SIM cards
These are the few bits and pieces I have checked. there may well be other issues but,
once Sim card recognition issue has been sorted out and the Dual Sim references are removed, at least then it will look like our very own CM11.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Official Build of madOS ( based on AOSP Oreo ) for Coolpad Note 3 lite with MTK 6735 SoC
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download ROM from M.A.D. Facebook
Download OpenGapps nano or pico from here: http://opengapps.org/
Backup
Flash new mandatory new Oreo TWRP: new oreo twrp, if this one isn't working...please try using this: alternate twrp
Boot to the new TWRP recovery
full Wipes (dont come crying if you didn't .. ;p )
Install rom (optionally following by GAPPS if you use them)
Optional: go to: wipe --> Advanced Wipe, tick 'cache' and click 'repair or change File System' --> change File System --> F2FS --> swipe to the right (hit back several times, and proceed the same way with 'data').
Reboot System
Working:
RIL (Calls /SMS, Data connection, etc)
Wifi
Bluetooth
FM Radio
All Sensors (including fingerprint)
Lights; HW Keys
Both storages & MTP
HW de/encoding
Camera (photos and video)
GPS & aGPS
Audio
madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)
Not working:
VoLTE
XDA:DevDB Information
madOS_O_CPN3_LITE, ROM for the CoolPad Note 3
Contributors
DerTeufel1980, superdragonpt, fire855
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: twrp
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 2.1
Stable Release Date: 2017-12-31
Created 2017-12-31
Last Updated 2018-03-29
Reserved
General F.A.Q.
Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.
Q: Which recovery should I use for this ROM?
A: Latest M.A.D. TWRP 3.2.1-0 recovery for OREO 8.1.0
--> Check xda Download Section
Q: How do i flash new recovery ?
A:
1: You can flash it with a scatter file
2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
Reboot to recovery to use new one
Q: Do i need to make full wipes?
A: YES, dont come crying at me, if you didn't .... ;p
Q: What is "full wipes" ?
A: To Wipe : Cache; System; DATA ...
Q: What should i use f2fs or ext4?
A: Both are supported, choose the one you desire
Q: Does this rom have any Theme support
A: Yup, We have working Theme Engine (madOS extras)
Update: On Oreo 8.1.0:
- We have extended Theme support even further ( madLauncher, messaging, etc)
- As well as many fixs
Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).
Q: I want to report a bug(s) do you have an issue tracker?
A: Yeah... madOS issue tracker
Q: What's working ?
A: Check first Post for current status
Q: App "x" doesn't work, why?
A: Probably not compatible with OREO yet, feedback is welcome
Q: Is the rom rooted?
A: NO, But you can easily root with :
1: Magisk ( v14 onwards.)
2: Super SU ( v2.82 onwards)
IF there are problems in rooting, you need to report it to the root-threads...There's nothing we can do
Q: Should i root together with rom ?
A: Not advised.. mainly the Magisk that gives some weird issues...
Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method
Q: Does xposed work?
A: Is there Xposed for O? ... then no ;p
Q: How is battery life with Oreo?
A: Pretty awesome
Q: Does this build support Vulcan?
A: No....duh! v
Q: Does doze work in this build?
A: Yup
Q: when will (feature/issue here) be fixed?
A: NO ETA , please
Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well
G.APPS F.A.Q.
Q:What GAPPS package should I use?
A: openGapps arm64 nano/pico
Q: How to properly install GAPPS?
A:Flash Rom + Flash Gapps at once
CREDITS and Thanks
madOS Team
Our translators, credits list here
A.O.S.P.
Pure Nexus
AOSPA
DU (Dirty Unicorns)
Omni
HELP supporting madOS
We do this on our free time, however we do have costs on maintaining this :/
Any donation is highly appreciated
You can donate by using
this link
If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]
About madOS Proprietary Apps
You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases
@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...
Reserved
Changelog 25th March 2018:
madOS version: 2.1.2
Build number: OPM1.171019.021 - March 2018 Security Patch Level
fixed video playback issues
improved camera quality
improved overall smoothness
tons of new options added
https://www.facebook.com/notes/mad/rom-810-official-mados-coolpad-note3-lite-mt6735/1647717181978715/
Changelog 4th January 2018:
madOS version: 2.1.1
Improved GSM/LTE signal handling
Fixed GSM/LTE signal with GPS enabled
Fixed Settings crash
Fixed LED notification
Added option to set QuickSettings background transparency
Fixed alarms
Fixed wallpaper scrolling setting in madLauncher
Improvements in bluetooth for A2DP
Updated included APNs list
Thank You MAD team for releasing this ROM
HAPPY NEW YEAR!!!
Thanks for the oreo, you had fixed camera bug, network switching bug, file system bug. But got some problems. gps works fine but if gps is on while data network is on, which causes a reset for both sims, leads to frequent disconnection and unstable network ( when ever any app request for location). second the brightness is very low in front camera video recording mode, you can see clear differnce if you switch to photo mode. Also camera got stuck while recording videos in instagram, it's deadlock only force quit intagram is the only option to make camera work again. Please fix these asap
Also problem while sending videos via instagram , videos become black and white , i think problem with hardware encoding
To avoid the ril crash with GPS, you/one needs to delete system/vendor/bin/mtk_agpsd.
You need to be rooted for this...
Sent from my uhans h5000, running Android 8.0.0
DerTeufel1980 said:
To avoid the ril crash with GPS, you/one needs to delete system/vendor/bin/mtk_agpsd.
You need to be rooted for this...
Sent from my uhans h5000, running Android 8.0.0
Click to expand...
Click to collapse
Thanks that works but after reboot network dropped two time but recovered instantly. Please also check - if one sim's signal gone it resets and scans for network but i think it resets the second SIM for no reason even if it has full signal.
anoop.rajasekharan said:
Thanks that works but after reboot network dropped two time but recovered instantly. Please also check - if one sim's signal gone it resets and scans for network but i think it resets the second SIM for no reason even if it has full signal.
Click to expand...
Click to collapse
Network is going to be much better in next release, independent from the GPS bug.
Sent from my uhans h5000, running Android 8.0.0
YouTube crashes
YouTube and camera crashes automatically , what should I do?
nitish2121 said:
YouTube and camera crashes automatically , what should I do?
Click to expand...
Click to collapse
Provide a log please. I don't face this behavior
Sent from my uhans h5000, running Android 8.0.0
update available:
https://www.facebook.com/notes/mad/...s-coolpad-note3-lite-mt6735/1561935003890267/
YouTube app freezes
The ROM is good. However, YouTube freezes after sometime and the phone just hangs. Need to force reboot somehow in order to solve this issue. YouTube is practically unusable now. Please look into this issue.
After 4th Jan update.. whether I play video in full-screen after some time screen freezes . Force restart is only option after that. Same with WhatsApp video call.
Volte
Do I expect volte support in future update of this rom?
HARISHFIRKE said:
Do I expect volte support in future update of this rom?
Click to expand...
Click to collapse
If you expect anything in future then wait for it in the future itself! Present generation can't think or predict about the future.
I'd say stay happy with what you have right now at this very moment. Coolpad got oreo being a mtk device is in itself a nice thing, hardly a bunch of mtk devices have development support.
With regards
Kubersharma :laugh:
Works with all ROM Kernel: Linux 3.x? 'cause I have 3.18.19+
Some bugs I found
- Phone freezes after some time while in fullscreen on YouTube.
- Hide quick settings on secure lockscreen not working.
Some feature requests
- Immersive mode quick tile.
- Stay awake quick tile.
- 180° rotation support.
Some features which I think are not right
- All the info in status bar (clock, battery) are a little off the edge of screen. Don't know why but, it makes the notification icons overlap.
Some questions I have
- What is MAD mode?
- I am a heavy android user who does HD gaming and browsing all day. Are the kernel settings optimised for that kind of use or should I tweak them to squeeze more battery?
1Nomintan said:
Thanks for your (MAD Team) hard work.
Keep going:good:
Click to expand...
Click to collapse
Nice that you appreciate their work, but do not qoute the whole OP thread, hope you understand [emoji3]
Sent from my Z2 Plus using Tapatalk
Not able to add call... if I touch add call it mutes instead. Also if I get a second call my phone it just gives me the beep sound of second call and doesn't wake the screen. I have to wake it and see whose calling and if I answer it by swiping upward the call is received but the screen continues to show incoming call receive screen. Phone basically hangs into that incoming call receive screen. I have to do a soft reboot to come out of it.
This project is currently on pause and will not resume for Android 9. Active development is taking place for Exynos7420 devices on Android 10, and Renouveau v10 will pick up once these developments are finalized and ready for testing. Renouveau also will no longer be based on ResurrectionRemix, as they are no longer continuing with Android 10. If a moderator sees this, I ask that they close this thread. No further help will be provided for Renouveau v9. Thank you!
Code:
/*Your warranty is now void, not that you had one anyway.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* A lot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
Renouveau is an aftermarket Android firmware designed to renew your Android experience, with popular bases driving it all for customization, performance, and stability.
AOSP
↓
LineageOS
↓
ResurrectionRemix
↓
Renouveau
Renouveau has only existed for a few months now, so please be patient as the kinks get worked out and everything you could ever want and more is brought to the surface for your eyes to see (on your phone anyway).
Source Code
All the source code for Renouveau is available from the Renouveau GitHub organization. Any changes made from the original ResurrectionRemix and LineageOS bases can be found here.
Additionally, the source code for the prebuilt kernel (soon to be included as part of Renouveau) can be found here.
Known Issues:
In-call audio on US-variant devices (see Patches down below)
MTP May be fixed now according to some users, needs testing and feedback
GateKeeperService (currently cannot be acquired by LockSettingsService, which prevents users from using security methods such as PINs and therefore prevents users from enrolling biometrics such as fingerprints) May be fixed now according to some users, needs testing and feedback
If you install a recent OpenGApps build, Google's Setup Wizard may crash while adding the finishing touches
Pre-installed Firefox will always crash (due to a bug Mozilla has yet to fix when the context of the app is in /system/priv-app until you update the app via a more recent APK or the Play Store)
F-Droid still exists (oops)
ViperFX will still want to install its driver despite the driver shipping with Renouveau, just give it root access to reinstall the driver and then you can revoke root access again if you wish
Working:
Audio
Bluetooth
Camcorder
Camera
Capacitive Buttons
Data
Fingerprint (only if you have previously-enrolled biometrics from before the GateKeeperService bug was introduced) (see above)
GPS
HWC
Microphone
Notification LED
Rotation
S-Pen
Sensors
Torch
Video Playback
Wi-Fi
Wi-Fi Hotspot (both 2.4GHz and 5GHz)
Supported Models:
SM-G920F
SM-G928X
SM-N920T/W8/P
SM-N920X
SM-N9208
Experimental: G92XUS devices
Experimental: G92X devices
If your model is not listed as being supported above but the ROM works for your variant of the SM-N920* series or the SM-G92** series, please tell me! I'll be happy to support it.
Install Instructions:
NOTE: Before downloading Renouveau, please check to make sure your device is an SM-N920T. If it is not, you will have to follow an additional set of steps in order to be able to flash the downloaded ZIP. Otherwise, you will receive an error about this ROM not being for your device.
The additional steps, to be done after downloading the latest version of Renouveau:
Open the downloaded ZIP file in your favorite archive software (such as 7-Zip, WinRAR, or good ol' File Explorer)
Inside of the ZIP, navigate to /META-INF/com/google/android
Drag the updater-script file to someplace you can access easily (such as your desktop)
Open the extracted updater-script file with your favorite text editor (such as Notepad, Notepad++, Sublime Text 3, etc)
On the very first line, you should see some text that looks like this:
Code:
assert(getprop("ro.product.device") == "nobleltetmo" || getprop("ro.build.product") == "nobleltetmo" || abort("E3004: This package is for device: nobleltetmo; this device is " + getprop("ro.product.device") + "."););
Remove this line such that the first line instead says this:
Code:
ui_print("Target: Samsung/nobleltetmo/nobleltetmo:9/PQ3A.190801.002/eng.joshua.20190914.154326:userdebug/test-keys");
Save the file
Drag the edited file back into the same location inside of the ZIP, and overwrite the changes if it asks you to
Use this edited ZIP to finish the installation/update instructions
Download the latest version of Renouveau v9.0 from the given releases page
Download the latest version of the Helios for AOSP 9.0 kernel from the given releases page
Download the latest version of OpenGApps (ARM64/9.0/nano) or a synonymous microG package (optional)
Download the latest version of Magisk (optional)
Reboot into recovery mode (support for recovery issues will only be provided for TWRP)
Flash Renouveau
Flash OpenGApps/microG (optional)
Flash the prebuilt kernel (if you're not using SM-G920F)
Reboot into Renouveau and set up your device
Reboot back into recovery mode, flash Magisk, and then reboot back into Renouveau (optional, but recommended for additional functionality not available without Magisk)
Downloads:
Renouveau (SM-N920T): Releases for Renouveau
Kernel (SM-N920*/SM-G92**): Releases for Helios for AOSP9.0
Patches:
In-call audio patch for US-variant N920* devices: nobleus audio test.zip
In-call audio patch for US-variant G92** devices: zerous audio test.zip
Social Media (*):
Discord
Telegram
Twitter
Credits:
The ResurrectionRemix Team for their amazing work adding the great customizations that Renouveau can extend upon
The LineageOS Project for the beautiful performance and stability introduced to the stock AOSP bases
@enesuzun2002 for bringing NexusOS to the Samsung Galaxy S6 Edge+, for which the Samsung Galaxy Note 5 wouldn't have such a stable infrastructure for custom ROMs
@ananjaser1211 for the original Helios kernel sources that I was able to port from OneUI to AOSP 9.0, as well as the patches being used for nobleus and zerous in-call audio testing
@Lunarixus for the flashable packaging of the nobleus and zerous in-call audio testing patches
@DqrKn3Zz for the flashable packaging of the Helios for AOSP9.0 kernel
XDA:DevDB Information
Renouveau, ROM for the Samsung Galaxy Note 5
Contributors
JoshuaDoes
Source Code: https://github.com/RenouveauOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
Based On: ResurrectionRemix
Version Information
Status: No Longer Updated
Created 2019-06-23
Last Updated 2020-07-12
Please support for N920W8
Please add support for N920W8 canadian carrier, i will post you my boot.img or any file to help support the note 5 canadian model.
Thabks!
manikar said:
Please add support for N920W8 canadian carrier, i will post you my boot.img or any file to help support the note 5 canadian model.
Thabks!
Click to expand...
Click to collapse
It may be possible that it already works for you! The only way to find out is to attempt to follow the install instructions and see if it boots. Before doing so, make sure to back up your device and then wipe data, system, cache, and dalvik/art cache. If you get a stable install running and can do your usual daily tasks, I'll make sure to add the N920W8 to the list of supported devices.
Good luck!
Quick boot and smooth home launcher. But My device cant find the sim (Note 5 N920T - sim VIETNAMESE)
The Bluetooth works very well on the N920G in both Floyd V2 and my builds of crDroid and Resurrection Remix, I do not know why not on the N920T.
Btw, Enes bringed up AOSP 9 for the Galaxy S6, not the Edge+ version & Khoailang2005 was the first to bring AOSP 9 kernel for N5, so, JijonHyuni take his idea an continue with it.
SonXoan said:
Quick boot and smooth home launcher. But My device cant find the sim (Note 5 N920T - sim VIETNAMESE)
Click to expand...
Click to collapse
Are there any custom ROMs where your device can find the SIM? If so, a link to the custom ROM would be helpful!
iTzPr0o117 said:
The Bluetooth works very well on the N920G in both Floyd V2 and my builds of crDroid and Resurrection Remix, I do not know why not on the N920T.
Btw, Enes bringed up AOSP 9 for the Galaxy S6, not the Edge+ version & Khoailang2005 was the first to bring AOSP 9 kernel for N5, so, JijonHyuni take his idea an continue with it.
Click to expand...
Click to collapse
I'll go ahead and update the credits section, thank you!
JoshuaDoes said:
I'll go ahead and update the credits section, thank you!
Click to expand...
Click to collapse
No problem, also your rom boot and runs very well on this device.
iTzPr0o117 said:
No problem, also your rom boot and runs very well on this device.
Click to expand...
Click to collapse
Glad to hear it boots! One thing I am looking for is translators, I don't want an English-only translation for anything I add :c
JoshuaDoes said:
It may be possible that it already works for you! The only way to find out is to attempt to follow the install instructions and see if it boots. Before doing so, make sure to back up your device and then wipe data, system, cache, and dalvik/art cache. If you get a stable install running and can do your usual daily tasks, I'll make sure to add the N920W8 to the list of supported devices.
Good luck!
Click to expand...
Click to collapse
Hi,
It boots up when i flash the hyper kernel after flashing the rom.
bugs:
- In call audio is not working, when i call someone and its just blank no sound and hang up the Dialer with a beep and same with incoming call!
whats working:
-Bluetooth work fine on N920W8 and everything works fine except in-call audio.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
To do:
-I think the main culprit is with the kernel it is not designed for our mobiles but instead it is made for all other samsung note 5 models.
-Please make some changes or build kernel and add support for N920W8 & N920T.
manikar said:
Hi,
It boots up when i flash the hyper kernel after flashing the rom.
bugs:
- In call audio is not working, when i call someone and its just blank no sound and hang up the Dialer with a beep and same with incoming call!
whats working:
-Bluetooth work fine on N920W8 and everything works fine except in-call audio.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
To do:
-I think the main culprit is with the kernel it is not designed for our mobiles but instead it is made for all other samsung note 5 models.
-Please make some changes or build kernel and add support for N920W8 & N920T.
Click to expand...
Click to collapse
Thank you for the feedback!
Unfortunately I haven't self-developed any piece of the kernel behind this, but maybe I can try and work some things out, but who knows. I have some ideas I can experiment with, however I don't personally have service on my N920T for testing. I see you've joined the Discord server, so hopefully we can stay in contact on this issue and figure something out!
JoshuaDoes said:
Thank you for the feedback!
Unfortunately I haven't self-developed any piece of the kernel behind this, but maybe I can try and work some things out, but who knows. I have some ideas I can experiment with, however I don't personally have service on my N920T for testing. I see you've joined the Discord server, so hopefully we can stay in contact on this issue and figure something out!
Click to expand...
Click to collapse
thanks so much!
i appreciate it!
Could we get the support for N920C
Thankyou:laugh:
abdulraheem78655 said:
Could we get the support for N920C
Thankyou:laugh:
Click to expand...
Click to collapse
Try it and tell me if it works! I can't support things I can't test myself.
Hey JoshuaDoes. Awesome job. We need people like you here. Just a quick question. Does call audio work for n920T?
munirshah77 said:
Hey JoshuaDoes. Awesome job. We need people like you here. Just a quick question. Does call audio work for n920T?
Click to expand...
Click to collapse
I wish I could tell you if call audio worked or not for the N920T, but I don't have service at the moment and won't for a little while. Would you be able to test for me?
Hoping wifi tethering gets fixed. It's the only thing holding me back since I use that feature all the time.
@JoshuaDoes first of all thanks man for your great work your ROM working absolutely fine on s6 edge+ G928G with hyper kernal 2.6 no problem so far I m testing it right now but only one thing recent and back button are not working every thing else is working fine but I m still testing
I know you didn't support s6 edge+ but can you help me in regarding to back and recent keys
And thanks again for great
miatawnt2b said:
Hoping wifi tethering gets fixed. It's the only thing holding me back since I use that feature all the time.
Click to expand...
Click to collapse
Just so you know, WiFi tethering *appears* to be working fine for me on my SM-N920T. I can create the hotspot on both 2.4GHz and 5GHz bands. I can also connect to it from my laptop just fine. The only thing I am not sure about at the moment is whether or not internet connectivity will work as I don't currently have service on my phone to test.
sufian.ahmed2007 said:
@JoshuaDoes first of all thanks man for your great work your ROM working absolutely fine on s6 edge+ G928G with hyper kernal 2.6 no problem so far I m testing it right now but only one thing recent and back button are not working every thing else is working fine but I m still testing
I know you didn't support s6 edge+ but can you help me in regarding to back and recent keys
And thanks again for great
Click to expand...
Click to collapse
Thank you for the kind words!
I'm afraid I wouldn't know where to start with getting the back and recents keys working, however should you decide to stay on Renouveau (or any other ROM that uses the Hyper Kernel), your best bet would be to enable the navigation bar and treat your phone like a soft navigation phone. In Renouveau you can find this under Settings > Renouveau Tools > NAVIGATION.
Best of luck!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Cypher. An extension to pure Android. Cypher tries maintain the purity of Android while offering useful features for users. The goal is to give the highest level of performance whilst achieving Simplicity.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Get your builds and changelog from our website
get.cypheros.co
Note: Builds are updated as soon as possible. There is no build cycle. Information pertaining to your device is displayed Accordingly. The current build is the latest for your device. If your device is scheduled to release on a certain day, but the new build isn't displaying, contact your device maintainer for more information but wait at least 72 h. Please know builds are updated by 12am EST.
Special Thanks to matteo0026, who is maintaining the device sources and TWRP.
Become apart of our G+ community - JOIN
REMINDER
If you're having issues and want to submit a report (Logcat) please make sure you are reporting from the stock kernel, not a modified kernel. Modified kernels can break or fix, even improve things. It depends. I can't get a full clue of the issue when you're not running the original kernel.
Click to expand...
Click to collapse
Features:
- Status bar Customization
- Changeable icons
- Quick pulldown
- Smart pulldown
- Notification count
- Clock position
- Seconds in clock
- Date design
- Quick Settings
- Brightness slider
- Brightness icon
- Tile tap customization
- System
- Screenshot partial and full
- Scrolling cache customization
- Power menu customization
- One-handed mode
Credits
LineageOS
AICP
PureNexus
AOKP
Dirty Unicorns
Paranoid Android
and more..
Installation instructions :
Be sure to have installed the latest TWRP recovery (you can find it in downloads)
Download the latest build and GApps (ARM, 9.0, I advice pico package) and copy it to your external SD-Card
Make a full Backup of your Data and copy it to your external SD-Card or USB-OTG
Boot to recovery mode
Wipe > Advanced wipe > Select system, data, cache and dalvik/art cache (and, if you want to clean more, select even internal storage, which deletes all the content in /sdcard) and do swipe to wipe. Format /data. When it's finished go to home page
Install > select ROM zip file > swipe to flash and when it's finished go to home page
Do the same thing to flash GApps and Root (if needed)
Reboot > System
Update instructions :
Be sure to have installed latest TWRP build
Download the latest build
Boot to recovery mode
Install > select ROM zip file > swipe to flash and, when it's finished go to home page
Reboot > System
Known issues
Mirror Screen maybe broken
Uplink to Chromecast maybe broken
Downloads (ROM)
matisse (10.1) devices: Androidfilehost, Mega
millet (8.0) devices: Androidfilehost, Mega
Matisse and Millet via Github
Other Stuff
TWRP Recovery Matisse and Millet: XDA, Mega, Matisse, Millet
GApps: https://opengapps.org/ (ARM, 11, Best to use is Nano or Pico) or
GApps: MindTheGapps
Magisk: https://github.com/topjohnwu/Magisk
Contributors:
crazydrive22, matteo0026 and all the S3NEO devs that provided the base for developing Pie on Tab 4
Source Code:
https://github.com/lineageos for samsung msm8226 common device and kernel source, with some patches coming from Gerrit for device source
https://github.com/s3neo for matisse and millet and specific variants device and vendor source
Thread started at 2021-09-24
Thread updated at 2022-01-20
New Updates for CypherOS are online.
Changelog
-Security Patch October '21
-Synced with LOS-Source
-A lot of work under the Hood from @matteo0026
Wonderful rom sir. My first issue is that Im not able to sign into playstore when or get past "Getting tablet ready" it always says "Couldnt connect" Not sure if its the rom or the gapps but im using opengapps. Anyway, thank you so much for the hard work that you have done with this rom. Extremely impressed. Thank you so much and looking forward to see more of your work.
Dvalin21 said:
Wonderful rom sir. My first issue is that Im not able to sign into playstore when or get past "Getting tablet ready" it always says "Couldnt connect" Not sure if its the rom or the gapps but im using opengapps. Anyway, thank you so much for the hard work that you have done with this rom. Extremely impressed. Thank you so much and looking forward to see more of your work.
Click to expand...
Click to collapse
Are you sure Wifi is connected?
If yes, try a different package of Gapps or try to restore a older backup (/data only) from a different ROM, if you have. Also be aware, that our tablets cannot connect to Routers with WPA3.
This will be fixed in one of the next builds.
crazydrive22 said:
Are you sure Wifi is connected?
If yes, try a different package of Gapps or try to restore a older backup (/data only) from a different ROM, if you have. Also be aware, that our tablets cannot connect to Routers with WPA3.
This will be fixed in one of the next builds.
Click to expand...
Click to collapse
I tested mindthegapps from this link https://www.cyanogenmods.org/downloads/mindthegapps-11-0-download/ its letting me setup, so it just opengapps that is the issue. Will share more later
Dvalin21 said:
I tested mindthegapps from this link https://www.cyanogenmods.org/downloads/mindthegapps-11-0-download/ its letting me setup, so it just opengapps that is the issue. Will share more later
Click to expand...
Click to collapse
Aye. Sometimes the Setup Wizard is causing troubles.
logcat and kernel logs. Also, the button for the camera is so low on the screen its cut off. I tried to make a phone call earlier, but it would just end the call immediately. Im able to get on the internet with 4G though
Dvalin21 said:
logcat and kernel logs. Also, the button for the camera is so low on the screen its cut off. I tried to make a phone call earlier, but it would just end the call immediately. Im able to get on the internet with 4G though
Click to expand...
Click to collapse
Hi. I´ve tested the Issues you mentioned.
The Camera App seems to be broken or has a wrong resolution. That´s nothing i can fix but i´ll report it to the devs. As a workaround install Open Camera. This App is working normal.
I tested phonecalls (in and out) with 4G and Edge. Both are working for me.
Maybe there´s an issue with your local provider. If the problem persists, i would suggest to dl ROM and Gapps again (maybe a file is corrupted), delete your ROM in TWRP + format /data and do a clean install of both, ROM and Gapps. Often this will fix those errors.
Your logcat is looking not too bad except a crash of firebase, what definetly could cause the trouble. But we´ll see it, if you´ve done a clean and fresh installation.
Hi, I got the SM-T531 tablet and I'm going to download this ROM and see how it behaves I will do all the possible tests I can do, to contribute. There's no way the 3g works right, just connections right?
Utherbone said:
Hi, I got the SM-T531 tablet and I'm going to download this ROM and see how it behaves I will do all the possible tests I can do, to contribute. There's no way the 3g works right, just connections right?
Click to expand...
Click to collapse
Yes, unfortunately 3g isn't working at any ROM from 9 to 11.
Matteo is working on it but with no success so far.
New Files are up!
-synced with LOS-Source
-Security Patch November 2021
-all Devices are now able to use WPA3
Hi @crazydrive22 . I'll take the opportunity and ask you a question of mine. I'm having trouble flashing any SM-T531 compatible roms. I will list the steps I followed.
1 - Flasing twrp with heimdall. At first I tried here: https://twrp.me/samsung/samsunggalaxytab4101.html but ta off the link there.
I downloaded it here on the XDA forum: https://forum.xda-developers.com/t/recovery-3-5-2_9-unified-matisse-millet-twrp-recovery.4019831/ ;
2 - full wipe and format;
3 - Flashing this rom (with or without gapps) Resulting: Loop in Samsung logo or should I wait too long?
Thanks for working.
Utherbone said:
Hi @crazydrive22 . I'll take the opportunity and ask you a question of mine. I'm having trouble flashing any SM-T531 compatible roms. I will list the steps I followed.
1 - Flasing twrp with heimdall. At first I tried here: https://twrp.me/samsung/samsunggalaxytab4101.html but ta off the link there.
I downloaded it here on the XDA forum: https://forum.xda-developers.com/t/recovery-3-5-2_9-unified-matisse-millet-twrp-recovery.4019831/ ;
2 - full wipe and format;
3 - Flashing this rom (with or without gapps) Resulting: Loop in Samsung logo or should I wait too long?
Thanks for working.
Click to expand...
Click to collapse
Hi.
First boot can take a lot of time. If it's not booting i would suggest to flash Stock 5.0.2 and start again from scratch. It's nescessary to had 5.0.2 installed once to make sure, that the Bootloader is updated. The Bootloader from KitKat (4.x) is not working with LineageOS 9 or newer and it's forks like crDroid or Cypher. The TWRP from Matteo is good, it's the lastest one and working well. But i can't tell you anything about Heimdall. I'm using Odin only to flash Stock or TWRP.
crazydrive22 said:
Hi.
First boot can take a lot of time. If it's not booting i would suggest to flash Stock 5.0.2 and start again from scratch. It's nescessary to had 5.0.2 installed once to make sure, that the Bootloader is updated. The Bootloader from KitKat (4.x) is not working with LineageOS 9 or newer and it's forks like crDroid or Cypher. The TWRP from Matteo is good, it's the lastest one and working well. But i can't tell you anything about Heimdall. I'm using Odin only to flash Stock or TWRP.
Click to expand...
Click to collapse
Thanks for the answer, it must be the 4.4.x bootloader, I didn't even ask if I had the 5.x.x one, I'm flashing the 5.0.2 About haimdall. It's wonderful, a point that can be negative is that the process is more manual, you must select each file for its respective partition, the good thing is that with it you can capture the pit file, it is very rare for an error to occur except if there is a problem on the PC or cable. It works on Linux and Windows and Mac OS X. I will return with news.
This is working amazing on my SM-T530NU, far better than whatever Nook bloat that was running before.
Installed and tested in matisselte, very good rom, very fluid. Everything works perfectly,
I will continue using this rom, very happy with how it works.
I hope you continue with the updates. Great job
groulo said:
Installed and tested in matisselte, very good rom, very fluid. Everything works perfectly,
I will continue using this rom, very happy with how it works.
I hope you continue with the updates.
Click to expand...
Click to collapse
THX.
Updates every Month ca. 15th, maybe earlier.
Hello again @crazydrive22. I tested this rom, conclusions, this rom in my normal use, very usable with tricks in developer options "disable animations scale and enable acceleration 2d". Overall is good.
Sorry. I stay practice English, on this time don,t use translator
New Builds are up.
Changelog
-synced with LOS-Source
-Security Patch December 2021
I need help, I have a problem, I have gone to update and I have restarted in recovery mode, but the tablet does not start, it is in a loop restarting all the time. I have disconnected the battery and the problem continues.
What I can do?