SW Check fail. device 3 binary 2. NEED HELP PLEASSEEE!!! - Galaxy S6 Edge Q&A, Help & Troubleshooting

So I wanted to install the new Android 6.0 for a few days ago. I accidentally installed the 6.0 bootloader first, and the phone i just stuck. I have installed the newest TWRP recovery and tried flashing stock rom ANDROID 5.1.1 , i also tried use smart manager to emeregency recover the phone... nothing semms to work, please help me. Every time im trying to flash a new rom in odin i just says NAND WRITE START!! FAIL!!

Well make sure that your is usb is ok, try on diffrent computer that your device has not been connect because the marshmallow diffrent set of drives , Try re download the copy of the firmware it might get damaged during downloading. Try to use the old tested kies it is more stable...

Related

[Q] help stuck in bootloader backup odin tells me every .tar file bad binary help

sd card got corrupted lost twrp backup and cant flash any new roms in twrp says md5 bad and odin wont let me flash new firmware says bad binary just rooted phone with cf auto root tried can get in to twrp and download but nothing i have tried works please help
Did you get the firmware from Sammobile?
yes tries several times
Are you able to do a fresh install with kies? That's always been my turn to when I have wacked issues....

Stuck in Bootloop

Hi together,
i need a little help... I flashed TWRP on my Edge that is Running Stock 5.1.1 at the moment. Wanted to Flash Hacker Kernel but forgot to put it on the device before flashing . Now im in a Bootloop. Download Mode and TWRP working. Tried to push the Kernel File via ADB but it's not working. I think because i didn't activate USB Debugging. Also tried to Reflash Stock Recovery but get a Fail in Odin... Also tried Smart Switch but got an Error while installing... (Device showed "an error has occured while updating the device software. Use the emergency..."). Than i flashed TWRP again with Odin and that's the point where i am... Any Suggestions for me?
Cheers
Basler
Read my guide using smart switch then flash 5.1.1 unibase kernel then boom ur in

HELP, semibrick Galaxy Alpha

Hi,
the other day, trying to install an official ROM by ODIN , I jumped a failure halfway through the process . The phone would not start and I can only access the mode Downloading ... I tried to install other official ROMs by ODIN, android 4.4.4 and 5.0.2 unsuccessfully always it hangs just as it begins to install system .
The most we have achieved is , after installing the PIT , install TWRP Recovery and access. But I can not do anything , if I try to do wipes fails in all partitions , I can not copy files by connecting the mobile to the PC, or I can not view files by OTG to install a ROM .
I appeal to your wisdom to rescue the mobile and try not to spend more for my bad hands
Hi i would like to help but first you should give more detailed information about your phone and if it is carrier locked or anything

"Soft-Bricked" SM-G935F

So, I was using my SM-G935F for some time when it just got stuck at bootloop(it was rooted with twrp)
So, I tried to flash the same firmware again to get it out of the bootloop... But when I flashed on the Odin, the flash somehow got failed and I am right now stuck at "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" I tried all of the old versions of smart switch to recover it but they always failed and I cannot get into either a bootloop or the recovery mode, just the download mode. (I was using Android 8.0 with TWRP and the firmware was Switzerland whic I downloaded from sammobile)
What I have already tried:
-Used all of the different Odin versions I had
-Tried flashing different android 8 firmwares
-Tried reflashing TWRP
-Tried to use heimdall but it doesnt recognize the device
-When I try to flash anything, it takes ages to go on and always fails.
AND I stıupidly tried to flash PIT files but none of them worked so it might even be Bricked rather then being Soft-Bricked...
Thanks for anyone caring to help me... (And since this had occured i searched all over the forums but cannot get to an end result so I hope that I am not making a mistake after reading the XDA rules )

OEM Unlocking Samsung J7 perx experiment

Ive noticed when I flashed the newer version of rom for Oreo 8.1 , I had to use twrp backup to restore it to earlier version . I liked earlier one cause could edit the apn settings . Well when I tried to flash earlier rom through odin it would say something like "fail aboot binary 6>5 "
Thats why I used twrp backup . I had my phone with the mods I wanted so had the idea if I turned off OEM unlocking in developer would it then make my phone safer since it was already rooted and I happen to lose it .
So I did then my phone wouldnt start up just flashed green screen with red letters saying unauthorized binary on phone.
I didnt have my computer at time and couldnt go into safe mode .
I did get computer and tried flashing bootloader , that didnt work . I then flashed newest version Oreo 8.1 through Odin , phone loaded back up . I then put back into download mode flashed twrp 3.3.1.1 and installed Magisk 19.2 . Phone then said it needed to reset because integrity authentication failed and needed factory reset . I did and it booted into recovery and I reset and it failed.
The benefit of doing this that may help others flash earlier versions of roms or diff roms is that Odin was able to flash that earlier version without a binary fail ! This may work on other models , it may not work but worth a try if you know how to flash stock firmware .

Categories

Resources