Related
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
I used the Incipio Feather for a few months. I really liked the "low-profile" but it was very fragile. I ended up cracking two of them just from taking them off to do battery pulls. As far as grip goes, it was generally nice to hold but doesn't offer that much more grip then the phone by itself. I've also used the Ballistic SG and while it was too bulky for me it had excellent grip. I was able to put it on my lap, back facing down, while driving and it never moved.
Currently I use the Speck Candyshell and it holds up pretty well. Grip can become an issue if your palms get sweaty as the exterior is all hard plastic.
Maringer said:
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
Click to expand...
Click to collapse
I had the feather. After two drops on different corners, the case had cracks. I expected as much and the case did its job. I got the Incipio silicrylic case as a replacement, which has a silicon cover AND a hard cover. It's slightly bulkier than the feather, but it still looks good and is definitely more sturdy. Case is grippy but not overly grippy where you have a tough time putting the phone in your pocket. I can remove the case without fear of cracking it, unlike the feather.
I had one of the Incipio Feather's also. It lasted about 2 months before it completely fell apart. Is is a nice case and I really liked the feel and look of it and it will fit in the car dock with a little modification. But it is not rugged enough for me to recommend. I am using a TPC case now. Does the job. Easy to remove to put in my Car Dock, LapDock or Standard Dock. It feels much better than the Atrix does by itself. But it is kinda ugly. But I have dropped it a few times and it keeps my Atrix safe.
The Seidio Active was my choice and I like it a lot. Two pieces - rubber with hard shell skeleton protects it nicely.
I can remove it (to dock) in seconds and replace it quickly too. Got it at Amazon: http://www.amazon.com/gp/product/B004WKIEF2/ref=oh_o03_s00_i01_details
That's the sapphire blue one, but they have other colors.
I'm using the otterbox commuter case. I got it off of Amazon.com for only 20 bucks on Saturday. So far it's been amazing
Sent from my MB860 using XDA App
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Of all the experiences I have read about cases and their compatibility with docks, the only one that I have heard that works is the Incipio Feather (or somehting similar) when taking in the consideration of actually not removing the case.
troycarpenter said:
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Click to expand...
Click to collapse
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Yes, I have read that people just simply remove the insert that is in the docks and it fits just fine. I have seen pics before too but can't remember where I saw them. Maybe I can try to find them.
troycarpenter said:
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Click to expand...
Click to collapse
---------- Post added at 11:29 AM ---------- Previous post was at 11:16 AM ----------
Here is a thread about a mesh cover (which is essentially the Feather but with a mesh look) and the second link is a post of someone in that thread showing the Atrix in the car dock with the case on.
Thread:
http://forum.xda-developers.com/showthread.php?t=1194096
Post with pics:
http://forum.xda-developers.com/showpost.php?p=16704009&postcount=27
Here is another thread discussing (and maybe confirming) the Feather working with docks:
http://forum.xda-developers.com/showthread.php?t=982574
The Incipio feather will fit in the car dock with the cardock insert removed, but the latch wont close. It has a ridge that comes over the face of the phone, but sits on top of the feather case. It will work if you make sure you have it inserted firmly all of the way in. I take corners pretty fast and had it fall out a couple of times. I modified mine to make the latch close pretty easily. Put it in the cardock and marked the outline with a X-acto knife. Used diagonal cutters to cut the 2 short vertical cuts. Scored the Horizontal mark with the X-acto knife and snapped the piece off with some lineman pliers. Now that these are $10 apiece I am tempted to get another one (or 2). Just was not worth the 25 bucks I paid 6 months ago.
Thanks for the various comments about cases.
I've looked at the various recommended cases and think I'll probably have to give the Incipio Feather a miss if it is as fragile as others have mentioned. I'm based in the UK so I'd have to order the case from the US (can't locate a UK seller) and this would cost me the equivalent of around US $ 45.00 which is a bit too much for something which won't last long!
Various other hard cases aren't available in the UK either (or not at decent prices) and, for me, the most important thing is to have a case lacking in bulk.
The Otterbox Commuter is the only one I get can get reasonably cheaply from within the UK (about US $ 20) but I'm not taken by the look of this.
Therefore, I think I've settled on the Seidio Surface which looks to have good reviews and will hopefully be the sort of slimline case I can deal with. I can obtain this via Amazon UK from a US seller for a mere US 36.00!
Incidentally, in the monster "Ruggedized battery cover" thread, there was mention that the Seidio Surface fits the lapdock and can be easily removed for the car dock:
http://forum.xda-developers.com/showpost.php?p=16600986&postcount=379
I don't own either dock so this isn't really of relevance to me!
I started looking for a discrete case for the same reason (battery door is way too slippery.)
There were some Chinese-made rubberized battery door replacements that seemed popular a while back. Most of the mobile accessory sites that carried them sold out, though I found and ordered one on eBay. The seller seems to have more:
http://www.ebay.com/itm/Back-Cover-...ltDomain_0&hash=item415bd6c69c#ht_2880wt_1085
I just got my yesterday. Fitment is surprisingly accurate, no misaligned cutouts or anything, and the added bulk is acceptable. Feels much better in hand now, too, when typing in landscape mode. It takes a deliberate effort to free the phone from the case, as it has a couple of tabs that clip into the retaining slots used by the factory battery door. Haven't noticed it snagging or coming loose as it goes in and out of my pocket either.
edit:
I just noticed the "dock fitment" discussion going on in this thread. I can't say anything about this case + docks since I don't own any docks.
I fashioned a case out of 3M carbon vinyl wrap. Keeps that Carbon Fibre effect on the back case whilst making it much more grippy (never dropped it since) and much more aesthetically pleasing as it gives off a 3D carbon fibre effect.
I can post pics if you like
Also worth mentioning you can pick this stuff up dead cheap off eBay - http://www.ebay.co.uk/itm/30x20cm-G...arParts_SM&hash=item4cf189dd66#ht_1792wt_1163
This sheet will give you a few attempts at it. It took me 2 to get mine the way I liked it
If you are just looking for grip without affecting aesthetics the Zagg Total protection is a great option. Clear is nearly impossible to tell it is on there. It is the same material and install as the screen protector. So no residue when removed. Make sure you read/watch the install tips from Zagg. I have been using it since April without a drop.
I have; however, decided to get a case and am trying the Seidio Active. The wife got the Incipio Silicrylic. both indeed fit in the HD/Standard Dock with the insert removed, I'm curious about whether there is enough support from the back of the dock though. As mentioned, I'm guessing the car dock will not close due to the extra couple millimeters, but will try it out and reply if it does indeed work.
Well, the Seidio Surface winged its way across the Atlantic reasonably quickly and I received it earlier this week.
It is very slightly bulkier than I expected but it is still very slimline so this isn't a problem as it still fits in my pocket easily. A little more difficult to take the phone out of my pocket than previously but again, not really a problem.
The surface of case itself isn't as 'grippy' as I expected, either, but it is a great improvement to the usual slick battery cover and I haven't juggled with it yet this week! I can now operate the phone using one hand if necessary without fear that I will lose my grip and drop it.
There are a few small imperfections on the back of the case - it would seem as though there were a few specks of dust or some other substance on the case before it was covered with the rubberised coating as a few tiny bumps can be felt. Not enough of a problem for me to bother returning it all the way to the US, however!
It is slightly tricky to take the Seidio Surface off the phone - it seems to come off easily sometimes but remain stubbornly in place at others. I think I'll need to practice taking it on and off the phone a bit more until I get the knack.
Overall, I'm reasonably impressed with the case and would give it an 8/10. It would have received a higher score had it not been so ridiculously expensive for me to buy here in the UK - Amazon.com are selling it at approximately half the price I paid!
Purchased the SiKai MicroFiber case for the Lenovo IdeaPad K1 Tablet. Delivery was within the UK and didn't take too long, about 5 days including the weekend.
I paid £15.19 delivered from Ebay UK Item number: 200647561882
The case is made from a strange type of plastic material, it's quite soft and flexible. Am kind of glad rather than faux leather. It is very thin and light, but seems sturdy enough to protect the tablet around the house. I have a 10" netbook bag that I keep it in when travelling to add extra protection.
I like it since it makes it easy to carry around with you and doesn't add bulk to it. I would say the case is lighter than my official HP Touchpad case and similar in strength, although a different material. I can only compare it to the ROOCASE Multi-Angle Leather Case and can say it is much thinner and lighter than that.
There is only one angle that the case allows for, but since it is an Android tablet you can flip the whole thing round and get a lower angle. Its fine for watching at night when streaming video so its not an issue for me.
Price wise the only options available to me at the time were the faux leather ones for about £9.99 or the official case from the Lenovo website coming in at a hefty £34.99 once you add the crazy £10 delivery charge! Not many options in the UK unfortunately but am glad I did some research and found this case.
Other things that you might notice in the photos (sorry poor camera phone ones) there is a place to put a pen, all cut outs seem correct and I love the fact that I can charge it without having the case open, also the hdmi port is free.
Not sure how long it will last but considering the few days usage of it, the minor things like the tablet can slide a tiny bit inside the case so would have preferred a tighter fit (although will try and adjust the velcro again that closes once you slip the tablet inside), the cut out by the front facing button could be a bit lower, and the magnetic clasps to be quite weak I will give this case an 8/10 and can recommend it.
http://www.ebay.co.uk/itm/SiKai-MicroFiber-case-Lenovo-IdeaPad-Tablet-K1-case-/200647561882
great case! I bought this sikai case too and actually prefer it more than the original lenovo K1 case.
This covers all ports, and also has a great microfiber texture that is slightly grippy, while remaining smooth to the touch. does not attract dust at all and keeps the K1 snug (if it feels loose, readjust the velcro tighter).
recommended!
Yeh have tightened it a bit more, doesn't move as much.... Glad I chose this over the cheaper cases and the official one which was more than double the cost here in the UK.
Can't believe how dead this forum is for this tablet, going to see if there are anymore forums with more support....
Just got this tab last week and love it so far. Looking for a good case but hate the leather, faux leather look.
Please let me know if you find more forums as I have looked and am surprised how little I've found....
I know of one other decent one, google "lenovo community K1"
viggs74 said:
Just got this tab last week and love it so far. Looking for a good case but hate the leather, faux leather look.
Please let me know if you find more forums as I have looked and am surprised how little I've found....
I know of one other decent one, google "lenovo community K1"
Click to expand...
Click to collapse
Cool will do.
This case is pretty good if you want something thin and light, there are stronger/more protective cases out there but they add bulk and I don't want that since I use this round the house...... Still glad I bought this case and find it better in that respect to the Roocase.....
Thanks, will google what you said.....
Got the SiKai for my TPT. Everyting else looks bulky in comparison. It is extremely thin (I''ve tried a lot of gadget cases over the years), and although it's screamingly vinyl, it doesn't look really cheap since it fits so well. Leather like this might come off as over-the-top (not that I wouldn't probably sucker into that if I could find it). It's got the seam around the edge where it cushions a drop, and the magnetic closure on the flap is a great touch, not too powerful, but it stays closed well enough.
My gripes are with the screen cover flap: it leaves two stripes on my matte screen protector where the fold places rub off the grease I thought I cleaned off last night, it doesn't hold the tablet vertical enough to really use, and it's busy looking on the front. If I had a choice in the design, I would leave off the "stand" capabilities and leave it flat. If it's open, it's really floppy; it would be easier to manage if it were entirely rigid. I might add a hide-able tether & a knob/button so you could stand it up on its other edge more vertically instead.
All in all, for the price I paid (US$26-ish), I'm very happy with it. If Piel Frama comes up with something, though, I might check that out, if only to drool. I still love my old Wizard case, and my Advantage case from them, too. Very lovely, solid product, and they've been keeping customers happy for a long time.
Addendum: After a couple of months with it, mine is holding together just fine. I had to trim a bit of vinyl fringe, butvall vinyl does that ( it frays a bit after it's freshly cut, but after you trim it once, unless it's cut really crooked, you're done). I have noticed that after a bit of stretching from the daily+ in & out I do to use the dock, it's loose enough to partially obscure the rear camera, not to mention trying to take pics with the flap cover is a huge PITA. If I used this camera a lot, I'd be totally fed up with this case. I may also be melting a bigger hole for the speaker (whch is hard-core disappointing to begin with). All in all, though, that's it for my complaints, which is pretty rare for me.I plan on cloud storage sync and a great cam on my next phone to use the tab for pviewing,
To be fair the official HP Touchpad case does the same thing to my Touchpad so it's one of those things.
I use the same case for my Thinkpad Tablet, and it's the best I've encountered so far, albeit with some flaws of it's own: Some of the stitching on the inside of the cover is already beginning to fall apart after ~1 Month of usage :-/
Stitching has been fine on mine, maybe tell the reseller to exchange it?
Wow cool.... but its little bit expensive
Just received the new Gumdrop Droptech case for my Prime.
I was surprised by the weight of the Fedex box that the case came in, as soon as I opened it I understood why. The Prime itself is no lightweight, and the Gumdrop case probably weighs half what the Prime does. There are no installation instructions included with the case, I didn't need any, I have owned a couple of Otterbox cases for my phones, if you are familiar with the way things are generally done in a multi-layer case it's not hard to puzzle out. However I think Gumdrop may be giving the general public a bit too much credit here, it wouldn't hurt to slip some simple graphical instructions into the box. The front layer which includes the integral screen protector snaps on to the Prime and the silicon rubber layer enfolds everything. Spend thirty seconds making sure the tabs are seated in the slots and you are finished. Installation takes less than a minute.
The Screen protector is great, I didn't bother removing my old screen protector before putting it in the gumdrop, and there's really no need. The screen works perfectly through both layers. I didn’t notice any diminution of image quality or responsiveness .
Silicon rubber tends to be tacky and pick up lint like a magnet. I was pleasantly surprised by the texture of the Gumdrop, it's not nearly as tacky as I have come to expect silicon rubber too be, the texture of the rubber is quite smooth, and I really don't expect to see it picking up lint like it's on sale. The case is HEAVILY molded however in almost a tire tread pattern, the treads make picking up and handling the Prime very sure, I don't feel like I am going to drop it, and the extra girth makes the tablet easier to hold.
All ports, including the MicroSD port are accessible by prying up little rubber flaps. The flaps fit into molded tabs in the poly carbonate front piece. If I had to rate them on a scale of 1-10, 1 being very easy to lift and 10 being very difficult to accidentally dislodge, I'd say they are about a 4.
Also worth noting, you cannot use the KB dock with the Gumdrop case in place, and the front polycarbonate part of the case does interfere with your thumbs hitting the spacebar when typing on the soft KB with the device completely flat on a table or your lap. Elevate the upper edge of the device an inch or so and the problem goes away.
In terms of protection, I would have to rate the case, as very protective of the device, say 7.5 on a scale of 1-10. Everyone is different in their expectations, but I expect the case to add excellent impact protection and good casual splash protection. It's not going to add any structural strength to the Prime, but I feel the device itself is pretty rigid, so I don't worry much about that. With the protection comes a significant increase in girth and weight, and here is where I think some people will probably get heartburn. Again, this is a case of different expectations and purposes I travel a LOT on the job, I bought a 64Gb Prime because I wanted a Tegra3 Hotrod with a lot of storage to replace my laptop, MP3 player and Kindle. The fact that it's very thin and somewhat light, really didn't even come into consideration for me. If thin and light is a big consideration for you and you use your tablet in a fairly controlled environment then this case probably isn’t your cup of tea. If on the other hand, like me, you drag the thing all over the country, weekly, and use it everywhere from planes trains and automobiles, and are looking to add some heavy duty protection then the Gumdrop case is a great option, and I think right now it's the only option for the Prime. At $59 plus $7 shipping, the price of admission is pretty salty. But when you compare it to the cost of replacing your investment, then it starts to look a lot more reasonable.
Hope this is helpful to anyone considering one of these cases.
QBall16 said:
The Prime itself is no lightweight, and the Gumdrop case probably weighs half what the Prime does.
Click to expand...
Click to collapse
As 10" tablets go, I would disagree.
I would disagree as well for the weight of the Prime. Also, the BOX ITSELF has instructions on how to assemble the unit inside of the case. This case is SPECTACULAR for the price as it protects every aspect of your device. I, personally, have two cases, one business( a Roocase Folio) and then also I have the new version of the Gumdrop case for when I am out hiking(yes, I bring Optimus with me in to the woods) and when I am out having fun.
I have to agree that the cost of the case is worth protecting your investment.
Hi , There .
My name is Ben Hoffman , if you are familian with A C forum you will know i am the formed Admin and i was quite good at accessories.
I just joined this forum a couple days ago . So here we go , let us talk about cases
1 Famous UAG Case
This is my fifth Urban Armor Gear case, and they only keep getting better with each iteration. I first discovered them for my Galaxy S3, and was very impressed with the style, durability, and quality. Once I got my S7, I immediately blind purchased this case with confidence based on my previous experiences.
First of all, I really love how they have expanded the color selection. I usually have gotten the plain black versions, but this time I got the translucent red-black 'magma' case because it just looked so cool. And once I got it and saw it in person on my phone, I was not disappointed. I uploaded several photos of my case on and off my phone so you can judge for yourself, but I *really* love how this case looks and feels.
The case fits perfectly on my S7, and is precision cut to perfectly align with all necessary inputs and openings: audio jack, mic, speaker, camera, LED, volume & power buttons, and so on.
The main material on the back is glossy and slick, but the black parts around the edges, corners, and buttons, are a nice rubbery material that grips well and makes me much less worried about my phone slipping out of my hand since it is quite slippery case-less.
One area I'm always happy to see improvements with is the physical footprint of this case. My first one looked cool but did add significant bulk. This one has improved the design to stay very protective and stylish but without adding quite as much bulk as before. Any case worth buying will add some width to your phone, but this one strikes a good balance between size and protection.
The only thing I'm not looking forward to is seeing the case do its job and absorb scratches, spills, falls, and wear & tear because it just looks so nice out of the box. But better on a replaceable case than directly on your expensive phone.
I do miss when UAG used to include screen protectors with their cases. I hope they decide to reintroduce that again in the future given the relatively higher price. I was always very happy with the cut and quality of their included screen protectors, but sadly this one does not include one.
* Summary *
Pros:
[+] Very durable and protective, none of my UAG-protected phones have failed to survive scrapes, scuffs, and falls
[+] Precision cut to allow access to all ports, inputs, and buttons
[+] Fits phone like a glove, without adding a massive amount of bulk
[+] Great material and very happy with the grip of the rubbery corners, edges, and buttons
[+] Great brand with a history of quality and good customer support
[+] Opinion, but I seriously think these are the best-looking and stylish Galaxy cases currently on the market
Cons:
[-] UAG no longer includes screen protectors like they used to
[-] One of the pricier lines of cases on the market
Other:[*] I wish they had a couple more color options so I could get my wife more interested in this case - previous iterations offered a pink variety.
Link http://www.amazon.com/Samsung-Galax...ie=UTF8&qid=1462657422&sr=1-3&keywords=uag+s7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2nd Clear SLIM HEAVY DUTY SPECK CASE
My wife and I are split on this one. But I don't want to imply either one of us really likes the case; just that I dislike it much more than she does.
On the plus side, Speck makes nice products; I have had & continue to have them on my Mac laptops. So I'm not criticizing Speck quality. But quality doesn't necessarily translate into value or function....
At $27.99 (Amazon price at the time of this review) I don't see the value. I know Speck (on both the Amazon product page and in literature included with the Vine sample) goes to great lengths to tell the potential buyer/reviewer that there is more to this case than meets the eye. Maybe so, but (pardon the pun) I just don't see it. I'm certainly not going to drop my brand-new S7 to see if it really is "mil-grade," but if it is it certainly doesn't seem any more "mil grade" than other cases I have used (and were at cheaper price points). I wonder if "mil grade" is sort of an advertising "come-on" like "organic"; sounds great but could mean just about anything (not only do I know that from personal experience (30 years in the Army), but take a look at this comment from the Wikipedia article: "Because no commercial organization or agency certifies compliance, commercial vendors can create the test methods or approaches to fit their product"). I'm not accusing Speck of anything; only saying that "mil grade" sounds good, but might not mean anything.
As to function, both my wife and I found that it was much tougher to operate the side buttons (2 on left, 1 on right) than it was using two other cases we've bought and are playing around with. It's so tough as to be annoying. The included literature makes the point that the slim profile makes it easy to slide in and out of pockets. True, but we also found the acrylic pretty slippery too; which I guess on one hand is a good thing (helps getting phone in/out of pocket), but also a real danger (so slippery that we might find ourselves testing the case's impact resistance sooner and more frequently than we thought we would).
I also thought the case was a fingerprint magnet. We washed our hands prior to using the case and within minutes the case showed smudges, fingerprints, etc. True, we might be able to see the beauty of the phone through the case, but it really looks bad when there are so many smudges, etc.
Finally, an acquaintance had a version of this case (one generation back for an iPhone). Didn't like it as "it completely fell apart within a few months." So unless there have been significant improvements over their cases of less than a generation ago, I'm not sure that this case is something I can recommend.
I wanted to go 1-2 stars while my wife felt it was a 3-star case at best. So we essentially split the difference. In the end, I really don't feel like the case warrants the asking price, nor do I feel it performs better (or even as well) as some of the other cases we're using and/or looked at ( Slim Transparent Clear Case for S7 or Galaxy Note 5 Case, Verus [High Pro Shield][Crimson Red] - [Military Grade Protection][Slim Fit] For Samsung Note 5 (yes, I know it's for a Note 5, but I have it on my Note and am hoping it will also come available for the S7; I suggested it because Verus claims "mil grade" for this case) ($15.99), or the OtterBox COMMUTER SERIES Case for Samsung Galaxy S7 - Frustration-Free Packaging - BLACK ($31.99)).
I’m not going to use it (already off the phone and looking for a new home). So if I’m not going to use it I don’t feel comfortable recommending it to others. To each his/her own I guess, so I’m sure this case has its fans. I’m just not one of them. Sorry.
3rd Slim Clear Transparent Case for Samsung S7
This is my 23rd case so far for my S7 (I like to change it up!), and so far the most durable/protective and best fitting one I have tried yet.Also it can show off your S7 with Transparent Back
The phone fits into the case very tightly, almost to the point where you can start to feel like it's not going to fit, but then you get it fully snapped in. The back is crystal clear and smooth, and has a good thickness to it -- not cheap or flimsy. I feel like this offers excellent protection against back side drops. The camera is recessed decently as well, which should keep it protected.
The sides are a more rigid plastic material that sits on top of the clear TPU material. Double protection is always welcome. I'm not sure that the rigidity will hold up to multiple drops -- but I'd rather the case take a hit than my phone, so again I feel safe in this case with side drops. The buttons (volume up/down and power) have cutouts so the clear TPU material is seen and used to press in. They fit perfectly and are very responsive.
The front of the case gives you a clear TPU raised border around the screen, so if sitting flat on a table, the screen will be raised up a bit off the table. This would protect again some screen-down drops, as long as the surface is flat without other object sitting on it that could poke the screen. This is as protective as cases get -- you'd want to get a screen protector of some sort to really protect your screen.
Overall, I'm really happy with the look and feel of this case. It doesn't look cheap, and feels solid and sturdy in the hand. I'm definitely a fan.
I was given a discount on the purchase of this product, but my review is based on the regular price of the item. This is a solid case that shows off your phone through the clear back, but gives it some style with the colored edges and trim. The gold color is very light, almost a cross between silver and gold, and doesn't look cheap. This is a fantastic case for the price!
$15.98 at amazon http://www.amazon.com/Artech-21-Scr...6&sr=8-3&keywords=artech+21+clear+case+for+s7
Use Artech21 ,get 20% off
3rd Easy grip slim cover
Lets consider this review tentative based on the release of the device. Seeing as how the phone isn't released yet, I can't really speak for how perfectly it might fit, etc. So with that being said, let me review this case based solely on material and design.
Typically with sleek cases, the level of protection is often compromised. For example, Otterbox cases are probably one of the best in terms of protection, but they are extremely thick in size and does not necessarily scream "fashion" to anyone. This Artech 21 case is as beautiful in person as seen in the renders. The cut-outs are created with extreme precision, and the gunmetal has a slight bit of gloss to demonstrate its elegance.
Pro:
- I've used previous Artech 21 cases. You can expect the cases to feel strong and well built.
- Dual material design. A soft but sturdy TPU cushion, and hard plastic frame. The TPU will handle the impact well but the plastic frame helps the case feel solid and strong.
- Thick enough without adding too much bulk.
- PRICE. I've owned a lot cases, some bought from carrier stores, and many from Amazon. You wont find case quality like this at this price from most sellers. PERIOD.
Con
- The design isn't for me. While I'm sure the ridged design will add grip to the already slippery glass on the S7, I would have liked it to be a smooth finish on the back.
Amazon : http://www.amazon.com/Artech-21-Sho...=1462658433&sr=8-25&keywords=slim+case+for+s7
15.99 dollars, artech21 can have your 20% off
4 Otterbox and Little Rock comparison
This case comes as a 2 piece clamshell, top part containing the built in screen protector and the bottom having a rigid back and flexible sides that secure it to the top piece. The top half is a secured in place screen protector made of a clear and rigid plastic sheet with a cutout for the action button. The phone is snapped into this portion first where it makes a snug and secure fitment. The bottom half is thicker and possesses the bulk of the padding, seen in the honeycomb ridges and thick sidewalls. This half receives the top where it snugs into the flexible sidewalls.
The power and headphone jacks are covered with flaps, speaker and the volume and power buttons are firm but still responsive. The sides of the case are beveled above and below and are textured with a crosshatch design which makes it easy to pick up from a flat surface and have a secure grip. The rear of the case is branded with the company logo and an industrial design. The area around the camera is not very beveled which provides poor access to the Heart Rate Monitor. In testing with 2 OEM and one branded wireless Qi charger pads, the phone charged fine and no undue heat was detected.
In comparing this product with a direct competitor and king of the hill, Otterbox Defender, a few differences stand out. While both items have similar port cover designs, the hinge side on the Otterbox is to the front of the case where the silicone has the greatest flexibility and the Little Rock case is hinged toward the rear of the case where the silicone has greater stability. In my opinion the silicone on the Artech case will not stretch out around the port covers as easily as the Otterbox could. The Otterbox has a more accessible design around the Heart Rate Monitor than the Artech case does. The shape and texture of the silicone on the Artech case makes it appear slimmer and feel more secure than the Defender.
The biggest negative to the Artech case in my opinion in comparison to the Otterbox case; is the lack of a holster. A device this size in a thick case isn’t as convenient in a pocket. This is a personal preference however, I know many people that do not use a holster. It would be nice if a holster for the Artech was available as an add-on item.
The greatest perk to the Artech case is it is 25% of the price of the Otterbox. A second or third one could be purchased as a backups and still come out under the cost of one Defender.
Link for Otterbox S7 defnder case :
http://www.amazon.com/OtterBox-DEFE...eywords=otterbox+defender+case+for+samsung+s7 $42
Little Rock http://www.amazon.com/Artech-21-Mil...64&sr=8-3&keywords=rugged+case+for+samsung+s7 19.99 dollars
Spigen Neo Hybrid Case
Nice case, but too slippery for one-handed use
1) Sufficiently protect the phone from accidental drops.
2) Not be too slippery so that I can easily pick it up, hold it, and use it one-handed.
3) Have a headphone jack opening big enough for my Etymotic ER4P headphones.
4) Slim so that it's pocket-able and easy to hold.
5) No outlandish designs and colors.
This case meets requirements 1, 4, and 5 but unfortunately fell short for 2 and 3.
Here are my thoughts on how this case met or didn't meet my requirements:
1) While I didn't actually drop my phone to test this, the case seems well-made so that it would protect the phone in most situations. I worry about a face-down drop since I've cracked screens twice like that, but this is probably a concern with most cases anyway.
2) The Polycarbonate frame gives the case a nice look, but unfortunately it makes the case too slick for my preference. This, combined with the relatively slick TPU (Thermoplastic Polyurethane) that surrounds the phone, makes me want to stop using this case. If I remove the polycarbonate frame, then I can grab the case much better on the sides and back, but then I lose the added protection that the TPU provides. I have been using the case without the frame lately because I just don't feel comfortable holding the phone with it on.
3) Because I listen to music so often on my phone, it's essential that I can use my good set of headphones with whatever case I have on my phone. Because the Etymotic ER4P headphones have a slightly bulkier rounded connector, I can't plug them into the phone while the polycarbonate frame is on the case. I can plug them in when only the TPU is around the phone, but the clearance around the frame just isn't enough to allow the connector to plug in. This case is probably designed for the standard, basic headphones that come with the phone, but it doesn't work for me.
4) I really like the slimness of this case because it hardly adds any bulk to the phone. Because the Galaxy S7's width is already the max for my own preference, a slim case that doesn't add much additional width is important to me.
5) When deciding on cases I typically look for basic, black or dark-colored designs that aren't too flashy. I am not a fan of the reflective/shiny lines that run horizontally across the top and bottom of the TPU, and I would have preferred a black frame, but overall the subdued style meets my needs.
Conclusion: The case’s slippery feel and inability to accommodate my headphones serve as deal-breakers for me. I can make this case work without the frame if necessary, but it's just not ideal for me. The search continues. If anyone has better recommendations on which cases meet my requirements, I'm all ears!
Otterbox Symmetery Case
I purchased the otterbox symmetry case in Eden teal. I wanted the floral pond design but it never seems to be in stock. The design on Eden teal is very cute. It reminds me somewhat of lilly Pulitzer or Vera Bradley designs. The case itself is fairly lightweight and a one piece construction. It Is hard plastic with a rubber lining and seal around the face.
The rubber lining around the face has a raised beveled edge. I'm not sure what the purpose of this is, but I do know it attracts dirt like crazy. Just a few moments in the pocket of my black pants and it picked up the color. It will probably continue to get dirty with use, but maybe regular wiping down with some alcohol or cleaner will help. It somewhat did today after I noticed the dye transfer. Also, the rubber seal has a little play.
The buttons are very firm but I hope they'll break in eventually. It's a little difficult to reach the mute switch, and I have very petite fingers. If you have large fingers, good luck!
I think it's pretty easy to get this case on and off. I didn't feel like I was gonna break my phone in two trying to get it off like my Speck Candyshell case.
I have a tempered glass screen protector on my phone and this case JUST BARELY clears it on the sides. It has plenty of room at the top and bottom.
I haven't dropped my phone yet to attest its protection. Then again, I really don't want to find out. Lol
I don't think this case was worth $40. Just seems a little steep for what it is. $25 is more reasonable. But hey, you pay for the name.
Overall, it's an okay case that hopefully provides more protection than you average run-of-the-mill snap on case.
Brief Review for Lazer S7 case
This is a great phone case for protection. It also look rugged which is a plus. There is a variety of colors so this case can suit anyone.The gunmetal/black looks great on the s7 , and this is the type of case you'd want to be sporting if you dropped your phone. The corners feel super rugged so it has nice corner protection. Heres a list of some pros and cons as to why you might or might not want the case.
PROS:
- super sturdy
- slim profile compared to other protection cases. (this is also a 2 part case)
- protects your camera from surface scratchs
- buttons are very tactile and responsive
- doesnt attract fingerprints
- corners seem super rugged
- the sides have dotted texture so you can get a better grip .
- on the back, the case itself has elevated lips so even your case wouldnt get that scratched up.
- no ridiculous labeling
CONS:
- this isnt much of a problem, but the volumes arent elevated. it might bother some people, so definitely keep this in mind.
Overall, I recommend this case to anyone who is looking for a sturdy case to provide your s7 with protection. Most cases that provide this much protection is super thick, but this case has a slim profile which is a huge benefactor. If you want a slim case to protect your phone look into getting this one!
Link at amazon http://www.amazon.com/Artech-21-Sho...&qid=1462658917&sr=8-26&keywords=slim+s7+case
15.98 dollars , use coupon artech21 get extra 20% off
Obliq Case
I still agree with the overall sentiment that the protection and size, the two most important characteristics of a phone case in my opinion, is a perfect balance. I would also retract that speaker distortion criticism, I think it may have been a placebo because I can't tell a difference between the two anymore.
However, I've found the lack of grip problematic; though it's less slippery than the phone itself, I think ridges on the side of any phone case is a necessity, or at least some sort of sticky texture; the case is much too smooth, and I feel like it's more prone to slip out of my hand than a case like the Speck CandyShell Grip (a fine case, but I prefer the aesthetics and strength of this case). Also, I found that the buttons are slightly harder to press than I originally thought, and the lack of tactile feedback (compared to the plain phone) is disappointing. For those two reasons, I've changed my review from 5 stars to 4 stars. All other previous pros and cons have remained the same.
Pros:
- I intentionally dropped my phone a few times (with the case on) from waist and torso height onto hardwood floor to stimulate an actual accidental drop. Phone was fine, case didn't receive any visible scratches.
- Because the phone fits well into the case and the lip covers the glass front, the touchscreen did not receive any scratches either. I also love the lip because when using the phone without the case, parts of my hand would get read by the touchscreen, so scrolling webpages with just one hand wouldn't be smooth; now, only my thumb will touch the screen.
- It's easy to put in and remove the phone from the case.
- The case only adds a few millimeters in thickness, so it's not too bulky in pockets. I think it's the right amount of thickness for comfort and protection.
- I like the sleek design of the case and its minimalism, but this is totally subjective. I also like the subtle logo instead of a big ugly logo. Absolutely no trouble with charging or headphone jack.
Cons:
- The buttons aren't too hard to press, but they don't give the same satisfying click that you get from the phone without a case.
- Though the case doesn't have any ridges or sticky/rubbery material, it eliminates some of the slipperiness of the phone, making it easier to hold and use with one hand compared to just the phone itself. However, you sacrifice some grip with the sleek design; I'd prefer ridges on the sides so it's even easier to hold with one hand.
- Speaker is ever so slightly muffled/distorted compared to no case (after a couple times comparing music with and without the case, I noticed a very tiny amount of distortion).
Normally I'd recommend being wary of some of the early reviews because some to many of the reviews were paid for, but I actually really like the product, and I wasn't compensated in any way. I will try to update this review after a week, after a few months, and at least a year following this first initial review to let you know how the case holds up over time.
Case Mate Glitter Case for my wife
I have a few complaints about this phone. I have the Samsung Galaxy S7 and yes, it's an amazing phone but has some quirks about the sensitivity of the edge. So if you are texting with your thumbs and your palm hits the edge you can easily erase words or hit the enter button...not a deal breaker, just something to be aware of.
Therefore, it is really important to get a case that has a bit of a edge that stands out from the phone so your palms aren't able to touch the screen when you type. I excitedly bought this case without realizing the quirk about the phone but after a few days of using it, the edges don't stand out enough from the phone so I have a lot of trouble texting when this phone case is on.
Secondly, the glue that keeps the jewels on is potent and will leave a smell on your hands. I thought it would mellow out but it has not and has remained just as strong smelling as the day I got it.
Thirdly, the phone case is weighty and there is no grip! So, it will slip and slide around in your hands and the extra weight is noticeable after texting or writing an email...my hands actually started to ache from holding this for too long due to the extra weight. It is also bulky so your nice thin, lightweight phone now turns thick and heavy and it is noticeable especially in a sweatshirt pocket, in your purse or in your pants pocket.
Lastly, an odd complaint is that it picks up every little hair and piece of lint...they will stick up off the back of the phone. So anytime you put in your pocket or in your sweatshirt pocket, it comes out with little hairs sticking up all over the back of it. Plus I have cats and even their hair gets stuck in it. I am constantly picking them off! Super annoying! The back isn't' a smooth texture at all...it's pretty rough and not that comfortable to hold in your hands and it catches on everything.
Overall, I am just not pleased. I looked at other reviews from other phone models that use the same case like the iphone 6 etc and there are many negative reviews stating that if you drop the phone, the case isn't sturdy and your phone will break. This is just not a chance I am willing to take on such an expensive phone. I am returning this after giving it a fair shot. I have found the Speck case to be wonderful and just what I need. Is it as glitzy? Not at all but it is lightweight, thin, good grips on the side so it won't fall out of my hand and a good edge that stands away from the phone edge so my palms don't touch the side of the phone when texting. I would highly recommend that case over this one. The design of this case is beautiful but it only goes skin deep...there are too many other flaws that outweigh how pretty it is. Be warned!
Spigen® [Tough Armor]
First of all, I am pretty excited to get my hands on this specific model of the Spigen line. I have used Spigen's Slim Armor case ever since the LG G2 from a few years ago. I simply love the protection I can get with no real added bulkiness, and the idea that you can change out the hard outer shell for a totally different color to suit your mood for whichever day of the week it is.
If you have seen my review of the Spigen Slim Armor series, then you already have a slight idea of the technology behind this 'air cushion' design. The corners are designed to have what appears to be air added in between the rubber, allowing for a softer impact if you ever drop the device. The case comes in a few different pieces. First of all, you have the outer shell, which is a hard plastic. You might think that the Slim Armor series is a hard plastic, but the Tough Armor series actually does not bend like the Slim Armor does. This part, unfortunately, does scratch in time. I went ahead and took the liberty to scratch it with my keys, because often times I may have a few coins and perhaps my keys in my pocket. I did purposely carve my keys into my case, which hopefully you will not do under normal circumstances. The second part is the rubber or TPU inside, which gives it a very soft feeling to not scratch the phone as it sits inside the case. This inner shell is the majority of where your hand actually touches. It surrounds much of the sides, top, and bottom. If you have ever used the old school HTC phones, this is the exact type of TPU that prevents finger prints and gives it a really firm grip when you are holding the phone. The S7 is a very slippery phone without a case, which I am sure you know if you are looking for a case! This removes any worries that I truly have. Another difference between this and the Slim Armor is that there is no kickstand. After trying the Slim Armor, I do like the kickstand feature. Unfortunately, the kickstand did not make it to the Tough Armor series.
Overall, this is still my favorite Spigen product. The only "down" side is that I love the back of the S7, and I feel like the clear cases that Spigen carries can show off the back so much more. This case does not interfere with charging. The cutout ports are also very nicely done. There is no cutout for the sim card tray, but hopefully you are not taking that in and out often. The buttons feel clicky and responsive.
Straight out of the box the case is very attractive in coffee brown. The S7 fits in the holder perfectly and seems to be very secure. The magnetic clasp works well. All the cutouts are very generous. The overall look and feel are very nice and I am satisfied with my purchase with the following caveats:
VRS Design Wallet Folio Case
http://www.amazon.com/Galaxy-Design..._UL160_SR160,160_&refRID=028JFGRBSB4K0J2J85Y9
My particular case does not work with my wireless charger. If that is an issue avoid this case. Others can chime in if it's just me.
This will not replace a wallet completely. When you load up the case with cards and cash it does not sit well on the phone when closed. The three cards that I am am using don't sit that well either, but I feel they will be fine once the case is broken in a little more. Once broken in the front cover will have a curve to it for sure.
If you are the type not to use any screen protection, the case can potentially scratch the glass. The front flap has some give, so it will slide back and forth a bit. Also the edges of the cards come in direct contact with the screen.
A few stitches are not that tight. They have the potential to come loose with wear.
The "leather" has a few fine marks after a few hours in pocket. They are minor and hard to notice with a casual inspection. I am uncertain whether or not they will buff themselves out with wear or get worse. I will post a long term review at some point.
The front cover will press the home button while in pocket. There is a setting on the s7 to prevent this.
I know this sounds like a negative review, but I definitely do like the case. My logic when buying this case was that I would use it as a low profile wallet/case for occasions such as a night out or whenever I might want to minimize the bulk of carrying two items. If my caveats don't bother you too much than this may be the case for you.
If you have more cases , you can also add them into this thread
a lots of people contacted me about reviewing the cases , just simple contact the manufactory tell them what you can do for them,And you will have your answer
hey , i am going to add more reviews as i was contacted by some cases company , please add your review or tell me what you want to know
Spigen Wallet CASE
I really like this case. It's sleek and looks nice.
Pros
1. Phone fits snugly
2. Raised lips at top and bottom for extra protection
3. Look good
4. Holds up to 3 cards and easy to open
5. Buttons line up perfectly.
6. Double lining case for extra protection
Cons
1. Screen protector doesn't stay on due to tight fittings. (Solution: file down edges with file or scissors)
2. Card slot is very tight
3. Compared to my Onway case, this feels cheaper and more malleable.
4. Card slot could be a tad bigger.
Overall, it's a very nice case and I highly recommend it especially for someone who doesn't like carrying their wallet.
i am going to review a leather case , just trying to add more accurate description , let me know which case you want to know
any case that doesnt cover the buttons on the sides ?
dallasmanic said:
Otterbox Symmetery Case
I purchased the otterbox symmetry case in Eden teal. I wanted the floral pond design but it never seems to be in stock. The design on Eden teal is very cute. It reminds me somewhat of lilly Pulitzer or Vera Bradley designs. The case itself is fairly lightweight and a one piece construction. It Is hard plastic with a rubber lining and seal around the face.
The rubber lining around the face has a raised beveled edge. I'm not sure what the purpose of this is, but I do know it attracts dirt like crazy. Just a few moments in the pocket of my black pants and it picked up the color. It will probably continue to get dirty with use, but maybe regular wiping down with some alcohol or cleaner will help. It somewhat did today after I noticed the dye transfer. Also, the rubber seal has a little play.
The buttons are very firm but I hope they'll break in eventually. It's a little difficult to reach the mute switch, and I have very petite fingers. If you have large fingers, good luck!
I think it's pretty easy to get this case on and off. I didn't feel like I was gonna break my phone in two trying to get it off like my Speck Candyshell case.
I have a tempered glass screen protector on my phone and this case JUST BARELY clears it on the sides. It has plenty of room at the top and bottom.
I haven't dropped my phone yet to attest its protection. Then again, I really don't want to find out. Lol
I don't think this case was worth $40. Just seems a little steep for what it is. $25 is more reasonable. But hey, you pay for the name.
Overall, it's an okay case that hopefully provides more protection than you average run-of-the-mill snap on case.
Click to expand...
Click to collapse
Was this review just copied and pasted from an iPhone case review? Or does the S7 have a mute switch that I'm not aware of?
Relayers said:
any case that doesnt cover the buttons on the sides ?
Click to expand...
Click to collapse
i have not found yet
I've been using the RhinoShield Crashguard for about a week now, and wanted to post a review of my experiences so far. FULL DISCLOSURE: I received my crashguards for free from the manufacturer for evaluation purposes. That said, this review is 100% my opinion and is no way influenced by anyone or anything other than my own personal experiences.
Phone: Google Pixel
Items: Red and Black RhinoShield CrashGuard (CG from here on out, since I'm already sick of typing the full name...) and Screen Protector
Size: Overall, the case adds quite a bit of width to an otherwise moderately sized phone (at least in today's phablet-laden market). From my rough measurements, the case is about 3-1/8" wide. This makes the phone feel much larger than it is. The CG is very sturdy, though, and there's no slipping of the phone in the case. It's a thick bumper, as you would expect for what it's designed to do. It does have a sizable ridge on the back side, which took a little getting used to. I must say, I haven't had a strict bumper case ever on any phone, so it felt a bit unnatural for me to widen the phone so much without any corresponding thickness added. The CG made the phone take up much more room in my pocket than I expected, and made one-handed use a bit awkward. It just didn’t feel right to have such an effectively-wide but relatively thin device.
Protection: Undoubtedly, this case adds great protection. I haven't put it through the gamut of tests, but did once drop the phone onto a hardwood floor from 36"-48" without any issue. I thought (feared) for sure the glass would have been cracked, but it was totally fine. There's more than plenty of front and back lip/raise to leave me feeling very comfortable to toss the phone on my desk or end table face-up or face-down without any concern. I felt like the phone was well protected given the design. Keep in mind, this is not at all an Otterbox, but outside of dropping on jagged rocks of the corner of something blunt, I feel very confident the CG will keep the phone safe on normal falls.
Look/Feel: I tried out both the red and the black CGs, and the black is my preference. The red was a bit more "neon" than I expected, a sort of salmon-y/orange-ish red. At first I was little surprised, but I suppose this makes total sense since the CG is a matte plastic. You can see more in the expanded imgur album at the link below. It added a little grip, but not much. I had saw someone suggest the case's grip made it hard to get the phone out of their pocket, that was not my experience at all. This case weighs basically nothing, so it was really awesome that you get some protection with essentially zero added weight. Overall, really like that you still see the phone's construction with just a bumper, but I’m still split on whether or not the odd aesthetic is worth it here.
Other General:
The case seemed to heavily dampen the phone's already average vibrate. I frequently did not recognize notification vibrations with the phone on my desk while in the CG. Phone calls were clearly noticeable, though.
Another item is that the charge port is not large enough for my i-Orange and Cable Matters aftermarket cables. On the black one, I could shove them in and eventually get a charge, but no luck with the red. The stock Google charge cable fit perfectly fine, as did the stock cable from my 5X.
I had no issues with the headphone jack opening, but given that the case is quite thick around the edge, I could see some headphones with a thicker plastic casing, or potentially with an angled plug, not fitting perfectly. YMMV, and again, my Amazon Premium/Fire headphones fit perfectly well.
ScreenGuard: As noted in detail in my imgur link, the screenguard seems to be about 1-1.5mm too narrow for the phone. Interestingly, this was the exact same problem my brother noticed with his Zagg screen protector on his Pixel Xl, so I'm not at all convinced yet this is RhinoShield's fault. Nonetheless, it's worth noting. It has no real functional impact on the device, and the front camera, sensor, and earphone holes align perfectly. I do with the screenguard was a bit wider, though. Not necessarily due to the small gap, but more due to the thickness of the protector causing quite a sharp ridge along the edge of the screen, which you'll constantly scrape across when swiping from left to right for menus and google now. If the protector was wider, this would be somewhat minimized. The surface is slick, too, which is nice...I didn’t feel any added physical resistance when swiping around, and there was no added delay to screen responsiveness. I never use screen protectors since i personally find them useless given how well gorilla glass has evolved, but am overall fairly happy with this one. I'll likely be keeping it on which, for me, says a lot...before I put it on I thought for sure I'd be getting rid of this in a day or two.
Pic: A couple attached, and lots of pics here: http://imgur.com/a/3khHx
Overall, I'm up in the air on if I'll continue to use the CG bumper. I'm not sure if I value the awesome fall protection over some of the functional aspects that it alters (ergonomics, feel, vibration dampening, overall size, etc), but it no doubt will keep the phone quite safe on a daily basis. I'm going to keep cycling between the CG and my Maxboost slim case to see which direction I want to go. It's definitely a nice bumper, and seems quite durable, but I still haven't decided if it's right for me. Here's a link to a bunch of pictures of the red and black cases, as well as my slim case for comparison.
Cheers
I bought the RhinoShield bumper and screen protector and have been using them for a few days ago.
Because my bare phone felt SO slippery in my hands, even basic one handed use was basically impossible and now I can use the phone with one hand quite effectively. Google Keyboard's one handed mode is helpful, but I can also grip by the side and reach to the top half of the screen.
Like this! (See pic)
Therefore, ergonomics is much improved, and I'm not bothered with the width. My hands aren't small and my fingers are long, and because it's definitely not feeling like a phablet yet.
As soon as the guard was on (over the sofa) I was tossing the phone and flipping it on my hand.... Grip!!! I could hold my phone haha.
Sent from my sailfish using XDA Labs
At this point, which case would you say has been better: the rhino or Max?
For what it's worth, I was chatting with Rhinoshield's Customer service to explain my issues with the CG for Pixel (not XL), and was informed that a revision 2 is currently in the works and expected to be ready in January/February.
Issues they are addressing:
- fitment on the volume rocker side to remove the bulge
- easier to press buttons
- enlarging the charge port cutout to better accommodate third party cables.
Honestly, with the amount of width this bumper adds, I would only recommend it as an alternative for users that normally look to buy LifeProof or Otterbox cases. This is definitely not what I'd call a low profile case. With the CG on, my phone is as wide as the Nexus6P.
I personally have switched to a Ringke Fusion as my daily driver and will use the CG only if I know I'll be needing some added protection.
Sent from my Pixel using Tapatalk