Related
I just book the 8G nook tablet. I comes with 1.4.2 so from reading different threads I thought the it would be easier to root with 1.4.0 so I tried the 1.4.0 SDcard.
Ever since my tablet won't turn on. I even tried http://forum.xda-developers.com/showthread.php?t=1470910 But no luck.
Any ideas or suggestions of what to try?
hold n and power button till it turns on. make sure sd card is ejected
Sent from my sensation 4G
nba1341 said:
hold n and power button till it turns on. make sure sd card is ejected
Click to expand...
Click to collapse
I held them for over a min, no response.
ajprog said:
I held them for over a min, no response.
Click to expand...
Click to collapse
Will the unit still boot from the 1.4.0 sd card? If so, you could try to reflash that again. Otherwise, I would keep trying to hold down both of those buttons (without the sd card in) for even longer. I had some instances where I thought mine was bricked (I have the 16 gb model), but eventually it came around. No real rhyme or reason to it.
Bob
Well assuming by this thread that Adam's 1.4.0 Booted and trashed your system.... you'll either have to try taking it back in and playing real real stupid, like too stupid to program the vcr stupid, or you'll just have to wait until someone makes recovery for the 8GB nooks.
Let me explain, the Boot Loader files for 1.4.0 are designed to run for the 16GB devices only, it wasn't until 1.4.2 (which is available for both devices) that B&N modified the Boot Loader files to run on both 16GB and 8GB. Therefore when MLO tries to initiate memory it's trying to initiate for the 16GBs 1GB memory as opposed to the 512MB of the 8GB device, this will cause the device not to boot.
the boot sd methods for 16gb dont
even work for 8gb so how could you even mess anything up? you sure you removed sd card?
Sent from my sensation 4G
I'm guessing you had SD in there and connected usb cable, it attempted to boot form sd and locked up with nothing happening on screen. Just tried it on the 8gb that I have here (just opened box this minute)
If thats the case all you need do is remove sd card, remove USB cable and hold power for 15 seconds. Then wait a couple of secs and power it back on with the power button again. If like mine it will boot back up fine and isn't bricked.
CelticWebSolutions said:
I'm guessing you had SD in there and connected usb cable, it attempted to boot form sd and locked up with nothing happening on screen. Just tried it on the 8gb that I have here (just opened box this minute)
If thats the case all you need do is remove sd card, remove USB cable and hold power for 15 seconds. Then wait a couple of secs and power it back on with the power button again. If like mine it will boot back up fine and isn't bricked.
Click to expand...
Click to collapse
Ok so there is a simple solution to this with the SD Root that is provided by Indirect. After you have a CWM SD Card by using winimaging (or what ever its called)take the MLO and the u-boot.bin from the 1.4.2 update package and place them inplace of the MLO and u-boot.bin on the SD Card. Once you have done that get the update.zip from B&N and flash that. That should fix most of your problems.
PS. The reson that he cannot get it to work is that the update.zip's uboot and MLO are form 1.4.0 which did not support the correct addressing.
Loglud said:
Ok so there is a simple solution to this with the SD Root that is provided by Indirect. After you have a CWM SD Card by using winimaging (or what ever its called)take the MLO and the u-boot.bin from the 1.4.2 update package and place them inplace of the MLO and u-boot.bin on the SD Card. Once you have done that get the update.zip from B&N and flash that. That should fix most of your problems.
Click to expand...
Click to collapse
I was about to do that but was also going to compile a new kernel. You reckon it will work without the new kernel do you? I best have a go
CelticWebSolutions said:
I'm guessing you had SD in there and connected usb cable, it attempted to boot form sd and locked up with nothing happening on screen. Just tried it on the 8gb that I have here (just opened box this minute)
Click to expand...
Click to collapse
No nothing is in there, when you use the 1.4.0 SDcard it loads the update image and replaces the current image. I thought there would be check so it wouldn't put a bad image that wouldn't work in place but I guess there isn't any safety checks on the built in update firmware routine.
Loglud said:
Ok so there is a simple solution to this with the SD Root that is provided by Indirect. After you have a CWM SD Card by using winimaging (or what ever its called)take the MLO and the u-boot.bin from the 1.4.2 update package and place them inplace of the MLO and u-boot.bin on the SD Card. Once you have done that get the update.zip from B&N and flash that. That should fix most of your problems.
PS. The reson that he cannot get it to work is that the update.zip's uboot and MLO are form 1.4.0 which did not support the correct addressing.
Click to expand...
Click to collapse
Are the new files posted yet with the correct addressing for the 8G? Or is there instructions on how to get them from clean 8G?
This is what I did to brick my NT. http://forum.xda-developers.com/showthread.php?t=1402190
Yes my NT is bricked, I have tried numerous times to shut it down (incase the screen was blacked instead of off) and turning it back on.
I have tried both the factory reset (power and home) and just the power button.
I as much as I can guess, when I did the firmware update above I messed up the internal booting. So I need to have the files for 8G so I can boot off of an SDcard.
I checked the B&N website if they had the 1.4.2 files (MLO and u-boot.bin) but they only have one updates file which I figure is for 16G.
Yup you're screwed take it into B&N and hope they'll replace it.
We have a working 8G SD boot!!!
http://forum.xda-developers.com/showthread.php?t=1517513
Thanks to bauwks and AdamOutler I now have some life (not fully restore yet) but it is progress.
probably many others would like to know what you did
Just looking at a few other threads, I think several people have made the same mistake and are looking for solutions on this. If you can give some additional details as to what you had to do to get going again, it would be helpful.
It still isn't working, but we have the first step done which is getting the 8GB to boot off the SDcard, they are now working on the Ubuntu recovery SDcard.
I will post back here when there is any more progress.
drt4nrg said:
Just looking at a few other threads, I think several people have made the same mistake and are looking for solutions on this. If you can give some additional details as to what you had to do to get going again, it would be helpful.
Click to expand...
Click to collapse
ajprog said:
We have a working 8G SD boot!!!
http://forum.xda-developers.com/showthread.php?t=1517513
Thanks to bauwks and AdamOutler I now have some life (not fully restore yet) but it is progress.
Click to expand...
Click to collapse
I jast passed a copy of all the internal partitions onto Adam so you should now be able to completely restore you're 8GB NT back to stock. Or if you now have adb access via SD card I posted the files on the forum so you could quite easily restore the system completely yourself.
CelticWebSolutions said:
I jast passed a copy of all the internal partitions onto Adam so you should now be able to completely restore you're 8GB NT back to stock. Or if you now have adb access via SD card I posted the files on the forum so you could quite easily restore the system completely yourself.
Click to expand...
Click to collapse
Unfortunately I don't know of any full images for SDcards that have be released yet for 8GB. I only know of the 2uboot which "crashes" when it reads the internal image to create the menu.
If anyone can help me get something else to work like maybe CWM that would be appreciated.
I'm out all day today (uk and I'm on way to work) but I'll happily help you later when I'm home.
HELP!!!
i was attempting to downgrade the software back to 1.4.0 with the acclaim download and my nook tablet went to black screen. now the only thing it does is occasionaly bing when i plug it to the computer. i cant tell if the thing is on or off. What do i do?
send it back to b&n and tell them it won't boot. that what I did and they gave me a new one. if you search thru the forum, you'll see that I missed the warning too and bricked. posted a warning after that and you missed it too.
Damn google search and my lazy ass, went straight for the fix.
Hey Guys,
I just got my 16gb NT during ebay's $199 sale. I'm having a serious problem getting the thing to boot off of an SD card. It came stock with 1.4.1, but I think something's different because I've tried:
Restoring back to 1.4.0 with the acclaim_update.zip:
http://forum.xda-developers.com/showthread.php?t=1402190
And the NT root SD card
Nook Tablet Root SD Cards
No mater what I do, I can't get it to boot off of the SD card via the zip or into CWM, all I get are factory reset screens instead of CWM. I've tried 3 different SD cards.
I'm going to give this a shot next:
http://forum.xda-developers.com/showthread.php?t=1470910
I don't know if it's going to work, so any help would be greatly appreciated. What's stopping my NT from booting off of the SD?!
why go back to 1.4.0 you don't need to. use indirect method using his image writer tool supplied if your on windows it sounds like you are not formatting the sd card
nba1341 said:
why go back to 1.4.0 you don't need to. use indirect method using his image writer tool supplied if your on windows it sounds like you are not formatting the sd card
Click to expand...
Click to collapse
I've tried formatting the cards both using windows and the NT internal tool. I've also tried writing the image file both directly to the SD and to the SD mounted in the nook.
I'll try indirect's method first.
I wanted to go to 1.4.0 to snowball.
It is my understanding that BN made a change in the new 8 gig NT that somehow prevents booting from the sdcard. Check other threads. No one so far has been able to boot from sdcard. Making some changes in Indirect's setup may solve it so I read on one of the threads. good luck.
Singingdrum said:
It is my understanding that BN made a change in the new 8 gig NT that somehow prevents booting from the sdcard. Check other threads. No one so far has been able to boot from sdcard. Making some changes in Indirect's setup may solve it so I read on one of the threads. good luck.
Click to expand...
Click to collapse
Not an 8gig - full 16 gig.
nba1341 said:
use indirect method using his image writer tool supplied if your on windows it sounds like you are not formatting the sd card
Click to expand...
Click to collapse
Doesn't work. Formatted through the nook, connected through the nook, wrote the image through the nook, etc. Went to go boot up (power+n, screen on/off, eject/reinsert card, power on) - all I got was a factory reset option instead of CWM.
Something is amiss.
Singingdrum said:
It is my understanding that BN made a change in the new 8 gig NT that somehow prevents booting from the sdcard. Check other threads. No one so far has been able to boot from sdcard. Making some changes in Indirect's setup may solve it so I read on one of the threads. good luck.
Click to expand...
Click to collapse
That change is the bootloader locking up because it's the wrong bootloader.
AdamOutler said:
That change is the bootloader locking up because it's the wrong bootloader.
Click to expand...
Click to collapse
Again, this is a 16gb nook tablet, not an 8gb. It looks like, very very briefly, I may be getting something other than the factory reset screen - I see what looks like the start of the nook bootup animation, then a green arrow that flashes quickly, before I get the factory reset screen.
I bought the NT from the Ebay sale last week as well. Have you heard of anyone else having issues booting off the SD card?
I was planning to book the NT tomorrow. Sounds like I might be returning mine if that doesn't work...
Nikkie
Try turning it off completely, inserting the SD card, and plugging it into your computer.
Sent from my Nook Tablet using Tapatalk
so to clarify things. you put the acclaim update zip on the sd card. and did you let it reset your nook to 1.4.0 or not? Also you don't have the acclaim update zip on your memory card when you are trying to boot off the sd card do you?
It did not try to reset it. It didn't do anything other than boot normally.
I know it sees SD cards because i can look at files, but it did not boot from it.
ok. wipe your sd card. put on ONLY the acclaim update zip. nothing else. stick that in your nook then turn it off. (in that order) then when it powers back on, let it update your nook
once it's updated, turn your wifi off and check what version you are on. then delete the acclaim update zip from your sd card and report back. KEEP IN MIND. it's NOT "booting off the sd" for this. it's just resetting the software to 1.4.0. if you think it's supposed to boot off a sd for this, think again. expect to see something along the lines of a factory update. that's what it's supposed to do whenever the acclaim update zip is on your sd card.
pissinguoff247 said:
Again, this is a 16gb nook tablet, not an 8gb. It looks like, very very briefly, I may be getting something other than the factory reset screen - I see what looks like the start of the nook bootup animation, then a green arrow that flashes quickly, before I get the factory reset screen.
Click to expand...
Click to collapse
Yeah, you're not affected by it. Your problem is operator error. They can't change hard-coded IROM with a firmware update.
I don't know what I did but I finally got acclaim to wipe me back to 1.4.0.
I had 3 different SD's formatted in various ways through the pc, through the tablet, etc. Each time it was ONLY acclaim on there. 158th time's the charm, I guess.
Now to tackle the apk parse errors while trying to sideload stuff.
Parse errors are caused by selecting the first button option just once when installing an app and then the second option button which is the only one you should ever select will give you parse error as well. If you do a search on parse errors you will see it.
All the Best
I was having issues with my SD card not booting last night during my CM7 install. After checking my work in Gparted I knew it was OK. Finally I unzipped the files into the upper root and it booted. I know I had it boot with the zip before but this time I could not get it to work?
pepi4 said:
I was having issues with my SD card not booting last night during my CM7 install. After checking my work in Gparted I knew it was OK. Finally I unzipped the files into the upper root and it booted. I know I had it boot with the zip before but this time I could not get it to work?
Click to expand...
Click to collapse
What exactly do you mean by "upper root?" I'm trying to get CWM and CM7 installed now that I know this thing will boot something off of the SD but I'm back to square 1
pissinguoff247 said:
What exactly do you mean by "upper root?" I'm trying to get CWM and CM7 installed now that I know this thing will boot something off of the SD but I'm back to square 1
Click to expand...
Click to collapse
If you are on 1.4.0, go to http://nook1.adamoutler.com then nook2 and 3
Choose package installer. Then use some adb root
AdamOutler said:
If you are on 1.4.0, go to http://nook1.adamoutler.com then nook2 and 3
Choose package installer. Then use some adb root
Click to expand...
Click to collapse
Nice.
Finally got CWM using the APK. This is a f!cking nightmare. I swear this thing is messing with me.
I'm going to root a B&N tablet for a friend of mine and I need to know the best way to set him up here. I think rooting it should be fine, building the SD card doesn't seem too rough, but when I give it back to him he really only wants access to Google Play and all the internal storage so he can drop some video files and a few games for his kid on it. Help me out here and let me know if I should drop a new rom or would it be better to just put the Play Store on it?
Edit:
Obviously I'm having a moment here. I can only get this nook to ask me if I want to format it or not when I reboot. Any ideas?
scuzzo500 said:
I'm going to root a B&N tablet for a friend of mine and I need to know the best way to set him up here. I think rooting it should be fine, building the SD card doesn't seem too rough, but when I give it back to him he really only wants access to Google Play and all the internal storage so he can drop some video files and a few games for his kid on it. Help me out here and let me know if I should drop a new rom or would it be better to just put the Play Store on it?
Edit:
Obviously I'm having a moment here. I can only get this nook to ask me if I want to format it or not when I reboot. Any ideas?
Click to expand...
Click to collapse
Personally I'd put cm7 + gapps on it and let him use it like a normal android tablet. I'd also repartition it or have B&N do it so that he has more access to the internal storage.
scuzzo500 said:
I'm going to root a B&N tablet for a friend of mine and I need to know the best way to set him up here. I think rooting it should be fine, building the SD card doesn't seem too rough, but when I give it back to him he really only wants access to Google Play and all the internal storage so he can drop some video files and a few games for his kid on it. Help me out here and let me know if I should drop a new rom or would it be better to just put the Play Store on it?
Edit:
Obviously I'm having a moment here. I can only get this nook to ask me if I want to format it or not when I reboot. Any ideas?
Click to expand...
Click to collapse
I agree completely with Cubanluke88. One reason I don't run stock is the white on white problems when running rooted stock. That one problem is enough to make me very use cm7.
One of the reasons a lot of people stayed with stock, if memory serves, was for the B&N magazines.
Play Store has magazines now
There are few reasons left to stay with the stock OS.
Grrrr. I've tried flashing images from both NT_Sdcard.zip and CWM_SD_Flash.zip to a 2gb microsd card followed by placing the CWM.zip over to the sd card and each time I try to boot the nook into the SD card all I can get is asked if I want to reformat. Help me here.
@OP,
If I was you and I knew I wouldn't always be there to troubleshoot if something with to go wrong with your friend's NT, I would just run the CM7 ROM directly from an SD card. That way, your friend would always have the stock ROM to use if something fails on the custom ROM.
scuzzo500 said:
Grrrr. I've tried flashing images from both NT_Sdcard.zip and CWM_SD_Flash.zip to a 2gb microsd card followed by placing the CWM.zip over to the sd card and each time I try to boot the nook into the SD card all I can get is asked if I want to reformat. Help me here.
Click to expand...
Click to collapse
Are you actually burning the .img files to it? And have you tried booting with the cable plugged in as well?
Yes on the .img file, no on the cable.
Try the cable. Some models need it to boot from sd.
No one knows exactly why unfortunately (mine never had this problem).
Let me make sure I'm doing this correctly before I go home and waste any more time.
I'm stuck using Windows Vista right now until I can get my Ubuntu box running so if I'm reading correctly what I need to do is d/l CWM_SD_flash_and_exe.zip and use Win32DiskImager.exe to flash cwm_sd_flashing_boot.img to my 2gb microSD card.
Then d/l NT-CWM-SD.zip and make sure the files in that .zip file are in the root folder of the SDcard then boot my NT by holding the power and n(home) button until the nook turns on and off. Plug in the SDcard and boot the NT and I should be loaded into CWM. Flash update.zip from the SDcard and I have root.
God as my witness if I had time to prep a live CD I would but I'm working two jobs and have a lot going on between jobs so I don't have time to get my linux box going right now. It would be so much easier if I had quick access to gparted.
This is the only thread you should be using.
Extract, burn image, boot into cwm (might need to be plugged in), install zip from sd, choose the zip that is in there and boom, rooted.
Well apparently I was sent to the wrong forum (NOOK COLOR) I thought the color and tab's used the same stuff. Apparently not. I have CM7 working on a 32GB SD card and will have one on a 16GB SD card in a few minutes for my fiancee's NT. I have all my apps that are linked to my Google account installed on my NT now what?
I have noticed the remaining SD card space is small. Surely I didn't use up all 32GB already. I assume the windows writing software made a small partition on the SD card for CM7 so how do I gain that space back or make the NT use the extra space for installations of apps etc?
Do apps have to come just from the app store or is this considered a rooted OS now where I can put apps on the SD card from anywhere and is there a special way to do this?
Just popped the 16GB SD card in my fiancee's nook and powered it on for the first time. I saw the Team-B screen then it went black. Apparently it rebooted and loaded up the stock nook OS. I suppose a re-write is in order on the SD card?
The SD ROM that you made is already rooted. It can do...root things.
As for the rest of your storage space on the microSD card, you'll have to do a little repartitioning. Looks like you're using Windows, so I recommend the freeware called MiniTool Partition Wizard. The user interface is every simple to understand.
All you want to do is resize the last partition on your SD card to consume all of the unallocated space that was left over. Then you will have access to your entire SD card space.
EDIT: Just saw your second post. Turn the NT off completely and plug it into the wall charger. Let it power on and see if it boots all the way through to CM7. If not try rewriting the ROM to the card. Or you may need to use a different SD card. I know I had problems with a 16GB PNY Class 10 card.
That is correct. I'm on windows 7
This is normal correct?
Solar.Plexus said:
EDIT: Just saw your second post. Turn the NT off completely and plug it into the wall charger. Let it power on and see if it boots all the way through to CM7. If not try rewriting the ROM to the card. Or you may need to use a different SD card. I know I had problems with a 16GB PNY Class 10 card.
Click to expand...
Click to collapse
I drug the bar all the way to the right on the last block on the SD card. Plopped it back in my nook and its booting to Nook stock.
Now for the above edit Its on a 16GB PNY C4 hmmmm.......
Would it have anything to do with not being fully charged yet being plugged into the wall though?
So now both are fubared for the second only booting to nook stock. LOL This was going so well about an hour ago and here I'm worried about what bells and whistles can be done and things can be added and how to add them. Sheesh I can't even keep CM7 working.
Both don't even try to boot from SD anymore? You might have to try and remake the ROM and switch to a different card.
Got another question. Just full of them I suppose.
Is there a way to have a boot menu on start up vs pulling out the SD card to get to the stock NT OS?
I would say CM7 also but it seems its not supported yet for SD booting.
Easiest way to get your boot menu would be to flash fattire's Cyanoboot. It's a second bootloader that allows you to choose from where you would like to boot at each power up.
Yea pulled the sd out of my fiancee's and it wont even boot into nook os wtf.
Plugged in or not.
Mine is booting fine into either again kinda weird.
Did the N/Power 20 seconds thing and got her NT powered back up without the SD card in. So it went into Vanilla nook with video and all since it is a new unit. Running the img file over the SD card again to see if it was just a hiccup and not an issue with the PNY SD.
I'm going to chock it up for the nook doesn't like class 4 pny 16gb cards since I re-wrote the sd card and I get the same problem.
It boots showing the N then flashed to the team-b loading screen then goes black for a while then shows the N and then loads nook stock.
So I'll go over to Frys and pick up another Patriot 32GB Class 4 card and give that a whirl. (It's what is running in mine just fine.)
That might be all it needs. Lots of people have success with SanDisk Class 4 SD cards, too.
Solar.Plexus said:
That might be all it needs. Lots of people have success with SanDisk Class 4 SD cards, too.
Click to expand...
Click to collapse
Since the NT is technically rooted via the SD card on mine how do I go about putting apps on it? Is there a certain place they need to go etc?
Not talking about apps from the Play Store either.
Meaning files like *.apk
So this is exactly how I run my nook tablet, and thankfully, I've had only one issue with SD cards and formating it with https://www.sdcard.org/downloads/formatter_3/ helped.
As for the rest, depending on the image that you used, it may or may not have Google Play Store installed, if it is, great, if not, you need to get it onto the card.
If it's already installed (and it most likely should be) then you just go into the Google Play store and download whatever you want.
You just need to be registered with a Google Account on the device.
Any more specific questions, just let me know, as I said I run the same thing for my nook, so I'm fairly familiar with it.
scgt1 said:
Since the NT is technically rooted via the SD card on mine how do I go about putting apps on it? Is there a certain place they need to go etc?
Not talking about apps from the Play Store either.
Meaning files like *.apk
Click to expand...
Click to collapse
If you're talking about sideloading apps, just put the .apk files on your SD card and open them with a file manager/explorer, then it will prompt you to install the app.
Your NT should mount the 1st (boot) partition of the SD card, unless you go into the vold.fstab and tell it otherwise.
Sent from my Slider SL101.
Solar.Plexus said:
If you're talking about sideloading apps, just put the .apk files on your SD card and open them with a file manager/explorer, then it will prompt you to install the app.
Your NT should mount the 1st (boot) partition of the SD card, unless you go into the vold.fstab and tell it otherwise.
Sent from my Slider SL101.
Click to expand...
Click to collapse
Sounds easy enough lol. I'll mess around with that after I watch the evening tv shows and my fiancee lays down. I still need to search for the dual boot thing you told me about earlier so I can choose where to boot to instead of pulling out the sd card. (What a terrible design where they put it. They could have just put a slot in the bottom or something instead of hiding it in the cut out area so you can't maneuver it around.)
Can the APK files be deleted off the SD card once they are installed?
Ok so made a folder and put all apk files in it on the SD card
I open the file manager on android and that folder can't be found???
I just tried to put the apk files on the root of the SD card now its just loading the stock nook OS.
So obviously putting the apk's in the root isn't a good idea.
scgt1 said:
Ok so made a folder and put all apk files in it on the SD card
I open the file manager on android and that folder can't be found???
I just tried to put the apk files on the root of the SD card now its just loading the stock nook OS.
So obviously putting the apk's in the root isn't a good idea.
Click to expand...
Click to collapse
what file manager are you using? you should be using something like es file explorer or root explorer. the standard file manager that comes with android is useless when it comes to sideloading apk's
ShinnAsuka said:
what file manager are you using? you should be using something like es file explorer or root explorer. the standard file manager that comes with android is useless when it comes to sideloading apk's
Click to expand...
Click to collapse
Using ES File Explorer now. :good:
This is prolly a stupid question, but it can’t hurt to ask . . .
I want to use CM9 on my Nook tablet. I current run CM7 on an sd card. Will the CM7 card be a sufficient back up just in case? I don’t have a ton of stuff on the NT to lose, but not having a back up stinks. Anyone?
vstarjewel said:
This is prolly a stupid question, but it can’t hurt to ask . . .
I want to use CM9 on my Nook tablet. I current run CM7 on an sd card. Will the CM7 card be a sufficient back up just in case? I don’t have a ton of stuff on the NT to lose, but not having a back up stinks. Anyone?
Click to expand...
Click to collapse
You mean using a different SD card to run CM9, and just use the old SD with CM7 as a back up ROM? That would work fine.
Soooo....does the fact that I'm using a new sd card cut out any of the steps of doing the Cm9 upgrade (http://forum.xda-developers.com/showthread.php?t=1534192). I'm thinking no but want to be sure before starting.
Wait, so you want to run flash CM9 internally and use the old SD card for more storage + a backup ROM?
OR
do you want to run CM9 from a different SD card?
Sent from my Slider SL101
Ideally I would love to run CM9 from an sd card, but i thought i read in a thread that CM9 only runs internally?? No matter how it's installed I want to keep the sd card with CM7 on it.
vstarjewel said:
Ideally I would love to run CM9 from an sd card, but i thought i read in a thread that CM9 only runs internally?? No matter how it's installed I want to keep the sd card with CM7 on it.
Click to expand...
Click to collapse
It is possible to run CM9 or even CM10 from an external SD card. It's a little bit if work, but not too complicated. If you choose that route, you'll definitely need another SD card.
Let me know what you decide, and I'll try and point you in the right direction.
I would love to do the sd card route. Any pushes in the right direction would be great!
vstarjewel said:
I would love to do the sd card route. Any pushes in the right direction would be great!
Click to expand...
Click to collapse
Have a read through succulent's blog instructions here. If you get stuck, report back. It can get a little tricky if you're new to some of it.
And here is the page with the files that apply to the newest version of CM9.
I tried the install but have a feeling the sd format wasnt done correctly. I tried to look where I thought it should be but didnt see anything obvious. How can I tell if the card partitioned correctly?
To see how the card is currently partitioned, plug your SD card into your PC and open up the MiniTool Partition Wizard software. It will display all the partitions on the card.
I have had an interesting evening. Final score: me: 0. Nook Tablet 332 (or more, I've lost count).
I checked the SD card with the partition program. For whatever reason, the third partition listed didn't get formatted on the SD card. I follow the instructions to add the partition. Doesn't work. I try to delete the partitions. Again, no go. I try and find the SD card as an external device, and it's not there. At this point I figure that maybe the card is bad, so I go out and purchase a sandisk 4 gb card. The partition program can find it, but it isn't listed as a external device. So even if the card IS partitioned correctly, I can't find it to copy the files to.
I've been trying to make this happen since Saturday, and I'm thinkin I'm done. I didn't have any problems getting the CM7 going, maybe I should just stick with it. Too frustrating. I hate to quit, but the sanity line is getting close to being crossed. I do want to thank you for taking the time to try and help me out . . . maybe someone else might see this post and it will help them (not sure how, but hey, stranger things have happened).
vstarjewel said:
I have had an interesting evening. Final score: me: 0. Nook Tablet 332 (or more, I've lost count).
I checked the SD card with the partition program. For whatever reason, the third partition listed didn't get formatted on the SD card. I follow the instructions to add the partition. Doesn't work. I try to delete the partitions. Again, no go. I try and find the SD card as an external device, and it's not there. At this point I figure that maybe the card is bad, so I go out and purchase a sandisk 4 gb card. The partition program can find it, but it isn't listed as a external device. So even if the card IS partitioned correctly, I can't find it to copy the files to.
I've been trying to make this happen since Saturday, and I'm thinkin I'm done. I didn't have any problems getting the CM7 going, maybe I should just stick with it. Too frustrating. I hate to quit, but the sanity line is getting close to being crossed. I do want to thank you for taking the time to try and help me out . . . maybe someone else might see this post and it will help them (not sure how, but hey, stranger things have happened).
Click to expand...
Click to collapse
Before you give up, how are you connecting your microSD card to your PC? Try using a microSD-USB or SD-USB adapter. Sometimes just SD adapters don't work so well and don't get recognized.
Learning these things is part of the fun of Android. We'll get it going, don't worry!
I took your advice and tried the sd card reader on another laptop at home. And I got all the way to the "Copy the rom and cm9.img inside the pX folder onto your sdcard." :laugh:. Here I am stuck. I looked at the files to try and stumble on the correct one, but didn't see anything that I thought was the correct file. And there is NO WAY I'm messing this up now . . . . This is the most progress I've made all week.
HELP! I am not turning this computer off until I hear back from someone . . . LOL.
vstarjewel said:
I took your advice and tried the sd card reader on another laptop at home. And I got all the way to the "Copy the rom and cm9.img inside the pX folder onto your sdcard." :laugh:. Here I am stuck. I looked at the files to try and stumble on the correct one, but didn't see anything that I thought was the correct file. And there is NO WAY I'm messing this up now . . . . This is the most progress I've made all week.
HELP! I am not turning this computer off until I hear back from someone . . . LOL.
Click to expand...
Click to collapse
If I'm remembering correctly, ROM refers to the official CM9 ROM that you downloaded (withe the modified updater script inside).
And again, I'd I'm remembering, cm9.img refers to the boot.img file included.
Let me know if that make sense.
I kinda thought the boot.img file was the correct image file . . . as far as the rom thing, is that the entire zip file I downloaded? I downloaded the update-cm9-acclaim-alpha0.06.1-fullofbugs.zip file. When I opened the zip file it looks like the attachment I added . . .
Okay, so "Copy the ROM and cm9.img inside the pX folder onto your sdcard."
ROM refers to the file you have called update-cm9-acclaim-alpha0.06.1-fullofbugs.zip (after you replaced the updater-script).
cm9.img refers to the file called boot.img located inside the p2 folder of the file called "update-cm9-acclaim-alpha0.06.1_sd_hd_8_19.zip"
Ok . . . when I put the acclaim files on the sd card it asked if I wanted to merge the META and system files with the ones that were already on the card. I said yes. Please tell me that was the right answer . . .
Some of the files asked if I wanted to replace them with the acclaim files, I said no, to keep both the files on the card. . . .
vstarjewel said:
Some of the files asked if I wanted to replace them with the acclaim files, I said no, to keep both the files on the card. . . .
Click to expand...
Click to collapse
I'm not sure which files would be being overwritten when you transfer to the root of your SD. When you think you're finished, just make sure you have all the correct files and number of files in the root of your card.