Dead XPeria X10 Mini after flashing bad rom from flashing tool. Hard bricked? :( - Sony Ericsson XPERIA X10 Mini

Hello everyone!
Need some help, I'm totally new to android hacking stuff and think messed up my phone, it's sure an old one but I loved it so much I don't want it to die.
So here's the point, yesterday I rooted it, worked fine, after that I unlocked the bootloader, always fine, but the problems began when I tried installing a custom recovery, didn't find a suitable one for the phone so I found RecoverX, and installed the CWM-Based Recovery 5.0.2.7 (ICS), after it done installing the phone was never able to boot anymore, I got stuck on a bootloop so I was searching for the original firmware, I found one and it worked after that, except the touchscreen was not working, so after reading some threads I realised that I installed a firmware who's not made for my phone version. Then I tried flashtool again and installed the built-in version or don't know what it is just for seing if it was able to restore the firmware since it said "X10". After that the phone turned off and wasn't able to boot anymore, the power button doesn't respond, no vibration, no backlight, no LED, and it isn't detected but the computer anymore, I tried flash mode and all other thing but nothing.
Is it dead? Can't I repair it anymore? Based on some reasearch I think it's hard bricked but can't find a solution.
Please help. Can I repair it by myself by doing some testpoint stuff or I don't know, I'm just too new about this, I just began yesterday.
PS: sorry for my bad english.
Thanks for you answer.

Related

Help i dont know if i bricked my hero, please help!!

Okay so i rooted my hero some time ago and ive installed several custom roms on it fine without problems, but two days ago i tried to install a new rom and now my hero wont boot at all! i can enter recovery mode just fine and even flash new roms but nothing seems to work, when i turn it on it stays on the black htc screen. i did a nandroid backup and put it on my computer and back on my device but when i try and load it the device cant find it. So im going to sprint tomorrow cause i need a phone, but they will just tell me i voided the warranty.. can someone please help me!!
go into recovery, go through all the wipe options, flash the rom you want. then it will boot.

XPERIA x10 boot stuck

Hey everyone
I'm sorry for bringing this up if there's a post already out there the same as mine but i cant find a solution due to facts that others dont have and i do.
First of all i am a freshly noob when it comes to android because i have never had neither checked much how it is so i am not familiar with android.
Now my problem is that i have a xperia x10 that i bought from ebay...it had a broken screen, which i replaced it already.
And it came with this SE boot logo stuck too.
So how do i fix this?
I already checked the guide but my phone still wont show or install the drivers.
But i might missed out some points i think
What to do?!
I would suggest trying to go into recovery mode. I'm not sure how it is done on your phone, but recovery mode will have options.

[Q] Galaxy S2 GT-I9100 hard bricked

Hi guys, I`m new to this forum and I wouldn`t be posting this topic if I found a solution on other forums. If anyone had a problem like mine, or saw a thread before, I would appreciate if you pasted a link to the solution, or gave some kind of advice.
First of all, I`m new to rooting, custom roms, etc., so I guess that whatever I did, it was my fault. I got this Galaxy S2 (GT-I9100) as a gift, and since i already had a phone, I wanted to take a risk and take a shot at installing a lollipop rom. I watched a few tutorials, it seemed simple enough, so i thought why the hell not, but in the process something went wrong...
Sooo... here is what I`ve done:
1.) Rooted my phone with VROOT
2.) Flashed custom recovery with ODIN. I`m not sure which version of CWM it was, 6.0.4.5 I think (the file is named CWM KitKar compatible-I9100). When I flashed CWM, my phone didn`t boot up. All I got was a Samsung Galaxy logo and a yellow triangle for a few seconds before my screen went black again, but I could still access both recovery mode and download mode using the combination of keys.
3.) And then I did what I think screwed up my phone. I thought maybe flashing a lollipop rom through recovery would solve the issue (maybe the recovery is incopatible with my older stock rom and it`s the reason why my phone isn`t booting). So i flashed CM12 from galaxys2root.com. It`s called CM12.1S ROM for Galaxy S2 GT-I9100 (Andorid 5.1)
Not only it didn`t solve my problem, I still can`t get my phone to boot (now I get a samsung logo and a yellow triangle, but screen doesn`t go black after a few seconds, I left it in this state till the battery ran out and still nothing). And on the top of all things, I can`t get my phone to recovery mode anymore, all I get is the yellow triangle. I can still get it into download mode, but it doesn`t connect with my PC anymore. It charges, but I can`t connect it with ODIN anymore. And the weirdest thing is, when I connect it to PC, my other USB port goes crazy and disconnect my USB Wi-Fi adapter
What went wrong? Any advice is highly anticipated. :good:

ZTE Nubia Z11 Max NX523J Stuck in BootLoop after V1.43 Update Failure

Hi Folks,
The Phone is stuck at Nubia Logo, and just stays there. TWRP was successfully installed and phone was rooted. Before actually loading the update package, i performed a wipe (delvik, system, data) and flashed a Stock Recovery. It prompted for Reboot which i did and the bad luck started.
Now, Vol-Up+Power boots into stock Recovery but unfortunately i do not have a backup nor an official Nubia ROM for the handset & hence can't do anything. Vol-Down+Power boots into Bootloader in which all the options pretty much take me back to Stock Recovery.
I know i made a stupid mistake but it would be really really helpful if anyone could please help put an end to my misery and undo this error. I have already tried discharging completely and then trying to power it back on again but to no avail.
Thanks in advance
Guys, a little help here please!!
My laptop does not recognize the device, it doesn't even appear when connected via USB Cable, although it charges alright.
I tried installing Nubia Recovery Tool but unfortunately it was in Chinese and I could not understand one word of it.
Please HELP!!
Hi Goraya,
I get a lot of answers from Pesa1234, hi is from Italy so his English is not that good.
I use the ComboRom 4.2 and in principle it is good, although I don't have fast charging.

anyone please help me. i just bricked my phone

the phone's model is nubia Z5s mini nx404h. the thing is this model is only sold to Philippines and Russia and its pretty outdated its jelly bean 4.3 but the thing is i rooted it. flashed the suitable TWRP for my device. and i accidentally wiped cache/dalvik then it restarted to recovery thrice even if i choose to reboot to system. the information about this device is so scarce that i had to spend 29 hours just trying to find a way to unlock the bootloader. i succeeded but now this. after certain reboots to recovery i shut it down. and tried to restart it, next thing that's happened its stuck with ZTE logo. buttons dont work. the battery cannot be removed, and its past the 2 weeks handset warranty so im doomed. now every time i try to charge it and connect it into a computer logo will show, again. and it computer says usb not recognized, then thats it. buttons not working nothing is working. please help. im trying everything, almost everything. thanks to anyone who will be kind enough to help me.

Categories

Resources