Related
Introduction
I'm not really into writing long elaborate OP posts, so here it goes. This is an AOSP compiled, flashable ROM. This ROM is fast and smooth, it is not bloated with useless features. Lustrous ROM has features being added that make it even more useful. You need the 4.04 bootloader! I put a lot of work and love into this rom, if you like it show me some support by donating!
Downloads
ROM Download: Click here!
SuperSU: I'm using 2.40 found Here
First Time Install
Put the file onto your Internal Storage/USB-otg
Reboot into Recovery (CWM/TWRP)
"wipe data/factory reset"
"install zip" -> "install zip from sdcard" -> choose the .zip and confirm (Optional: Add the other zip to flash... TWRP Only I believe)
"Clear cache/bla bla bla"
Flash Gapps
"Clear cache/bla bla bla"
Reboot
first boot may take up to 10 minutes
Features
RRO built in (for Layers)
Super smooth
OTA Updates
Build.prop edits for stability and speed
Super close to stock AOSP
stock kernel
BUGS
I am not sure of any bugs, haven't come across any. If you find some let me know and I'll get it fixed right away!
Credits
Thanks to @sykopompos for being my mentor and helping me out with a lot of things
Thanks to @scrosler for some tidbits and ideas
Thanks to @Chainfire for root
Thanks to the Simple AOSP team for the new gapps
Disclaimer: I am not responsible for anything that may happen to your device, yourself or your family. Flash at your own risk!
XDA:DevDB Information
[ROM] [5.1.1_r1] [Deb]Lustrous Lollipop for Nexus 7 (2013) LTE, ROM for the Nexus 7 (2013)
Contributors
skiman10
ROM OS Version: 5.1.x Lollipop
Based On: AOSP
Version Information
Status: Beta
Created 2014-11-08
Last Updated 2015-06-02
Reserved
Reserved
Thanks for posting. Will update you after I install the ROM
Sent from my Nexus 7 2013 LTE using XDA Premium 4 mobile app
Sweet thanks. Downloading, going to give it a spin.
And yep, that SuperSU is the latest.
Thx @skiman10 will Test it in the evening.
@skiman10 Is this an updated permissive boot image?
great many thanks for your work! Finally lollipop has come to DEB!
Thanks for this ROM. Finally can use android 5.0 on my deb nexus 7.. Successfully flashed this and so far so good. No problem or force close yet. Haven't tried with sim. Everything's run smoother now.
I can confirm that the mobile data is working however I lost my TWRP recovery after flashing it
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Everything's working great except Earth and Google Maps, even if the location is ON in high accuracy mode.
Where do i get the 4.0.4 Bootloader for DEB? I only found it for FLO...
mkretzer said:
Where do i get the 4.0.4 Bootloader for DEB? I only found it for FLO...
Click to expand...
Click to collapse
Flash the FLO bootloader. It's OK.
is it only working as primary via multiRom recovery?
I installed it as secondary and it failed to boot.
Google+ still missing for me here
Just finished booting.
Root is no-go for me (says binaries not installed despite having installed supersu zip).
Gonna see if I can tinker around with it to make it work, but for now no root for me.
jayfallen said:
is it only working as primary via multiRom recovery?
I installed it as secondary and it failed to boot.
Click to expand...
Click to collapse
That is an affirmative.
Also after you install it as primary, you'll need to install a kexec kernel to be able to boot to your other (now secondary) rom.
ElementalX 3.00 should work fine for that.
Ambious said:
Just finished booting.
Root is no-go for me (says binaries not installed despite having installed supersu zip).
Gonna see if I can tinker around with it to make it work, but for now no root for me.
That is an affirmative.
Also after you install it as primary, you'll need to install a kexec kernel to be able to boot to your other (now secondary) rom.
ElementalX 3.00 should work fine for that.
Click to expand...
Click to collapse
root does not work
on this core
I flashed my deb to stock 4.4.4, installed twrp, followed all instructions in op, and I cannot root. Thus I second another user's experience with root not working/SuperSU saying there are no binaries installed. I did install the supersu zip in twrp.
Also can't install Google+ neither from Market nor APK.
Fixed by flashing newer gapps package found here.
hhairplane said:
@skiman10 Is this an updated permissive boot image?
Click to expand...
Click to collapse
I might have to update the boot.img more, I'm pretty sure it is in permissive mode right now. I'll check that out right now.
BladeRider said:
I can confirm that the mobile data is working however I lost my TWRP recovery after flashing it
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hmmm you shouldn't have lost your recovery.... I should have turned that off. Let me look. Also you still rock a Galaxy Nexus? Respect.
florynn2003 said:
Everything's working great except Earth and Google Maps, even if the location is ON in high accuracy mode.
Click to expand...
Click to collapse
Ok so GPS is a no go. Got it
hhairplane said:
Google+ still missing for me here
Click to expand...
Click to collapse
What gapps did you flash?
DeathmonkeyGTX said:
I flashed my deb to stock 4.4.4, installed twrp, followed all instructions in op, and I cannot root. Thus I second another user's experience with root not working/SuperSU saying there are no binaries installed. I did install the supersu zip in twrp.
Click to expand...
Click to collapse
I'll look into root right now. I might have missed something in the bootloader
Good morning everyone! I'm awake and ready to smash bugs!
This link is shared on miui's official forum...
So that other users can check and experiance this beta update...
The latest beta build based on android lollipop 5.1.1...
China dev version..
here is the link...
http://b6fbb1.l44.yunpan.cn/lk/creQiyGCbXmLS
Note.
1. this will not lock your bootloader because it is 32-bit OS...and the bootloader will be locked after getting 64-bit OS....
2. You can not install any recovery which are available tthis time because in this update your recovery partition is changed....
3. for root access ...
install any app like RE, es file explorrer, flashify...
then go to security app then click on permission then root access and then enable root access for the app...
4. Use this only on redmi 2 prime...I am having redmi 2 prime and not tested on redmi 2 1gb version...
So if you are going to flash this, then it is on you whatever happen to your device your responsibilty...
thank you very much ..shall i directly flash the rom via twrp recovery ?
hypras55 said:
thank you very much ..shall i directly flash the rom via twrp recovery ?
Click to expand...
Click to collapse
twrp recovery will not work...you need STABLE miui rom 7.1.1.0 (recommended)...
theen use updater app...
is there anyway to get TWRP working?,
if not, how to back to miui kk?
zieruchan said:
is there anyway to get TWRP working?,
if not, how to back to miui kk?
Click to expand...
Click to collapse
use fastboot rom and flash it using fastboot method...or use mi flash tool.........
Just curious about something. [emoji28]
Did you use whatsapp or any other app with immersive status bar in this rom? Does the status bar change color in whatsapp or hike?
Don't we have global lollipop update rom lollipop
---------- Post added at 10:06 AM ---------- Previous post was at 10:05 AM ----------
Yes it's changes that's api included in android lollipop any phone any rom with android 5 and above all have immersed status bar
thakurneel said:
Just curious about something. [emoji28]
Did you use whatsapp or any other app with immersive status bar in this rom? Does the status bar change color in whatsapp or hike?
Click to expand...
Click to collapse
yes
please tell the flashing procedure ..i have stable 7.1.1.0 rom and stock recovery
Any one have global zip not Chinese
Somebody tried on a 1gb redmi2 ?
walterfr said:
Somebody tried on a 1gb redmi2 ?
Click to expand...
Click to collapse
I did. Don't try it. There's some graphic glitch. Slower than current miui kitkat rom. Mess up your recovery. I had to fastboot flash kitkat miui rom, restore twrp recovery, and restore back nandroid backup.
Sent from my 2014811 using Tapatalk
Any one have global rom miui 7 lollipop 6.1.26
androidnandroid said:
Any one have global rom miui 7 lollipop 6.1.26
Click to expand...
Click to collapse
not released
zieruchan said:
is there anyway to get TWRP working?,
if not, how to back to miui kk?
Click to expand...
Click to collapse
to get the recovery, use the latest twrp by kumajaya..
http://forum.xda-developers.com/redmi-2/development/recovery-recovery-built-source-inside-t3277621
Don't try this redmi 2
I flashed 1 gb redmi 2,,, I had so many problems,,, now I cleared with fastboot rom ,,, still I have a problem ,,, I cannot make call with all custom rom,,, but miui rom working fine,,, plzz don't try this rom in 1 gb redmi 2
Signature verification failed
How to solve Signature Verification Failed using Stock Mi Recovery ?
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
We are waiting for AD release. At least a beta?
mido25 said:
We are waiting for AD release. At least a beta?
Click to expand...
Click to collapse
Don't you know how to use the JustArchi's github?
Wow, really helps. I wish I have my OnePlus2 now.
Guihardrock said:
Don't you know how to use the JustArchi's github?
Click to expand...
Click to collapse
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
mido25 said:
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
Click to expand...
Click to collapse
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Guihardrock said:
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Click to expand...
Click to collapse
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
mido25 said:
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Lost recovery
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
JustArchi said:
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
Click to expand...
Click to collapse
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
eswa1068 said:
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
Click to expand...
Click to collapse
Use fastboot to flash the recovery
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
Thank you Sir
Tierri said:
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
Click to expand...
Click to collapse
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
amit_sen said:
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Yes. See the images to help you.
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
It's around 900 mb zip..?
And did anyone try that build..?
Mohit31 said:
It's around 900 mb zip..?
And did anyone try that build..?
Click to expand...
Click to collapse
Its because of the aroma you can choose the gapps of your choice...
Guihardrock said:
Its because of the aroma you can choose the gapps of your choice...
Click to expand...
Click to collapse
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
This thing should be STICKY
Finally was able to install CM13 properly using this recovery without Google Services crashing.
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
Now i am in oos3 but when justarchi release archidroid i wont use any other rom, i had so great experience with this on my s3
Edit: i am gonna try it :3 yo made me do it
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
rom is smooth as h*ll and battery is better than in normal cm13 but as i said the backed dont work yet :3 and aroma is not fully functional with the bootanimation and root (but the rom has the cm superuser)
The official OTA is currently rolling out:
https://forums.oneplus.net/threads/oxygenos-3-0-2-mm-ota-update-will-start-soon-on-oneplus-2.448549/
OTA ZIP 3.0.1 > 3.0.2
http://otafs.coloros.com/patch/amaz...018-019_patch_1606041303_bd42fc5cc5cc4ab2.zip
Here are some of the highlights of this update:
Android 6.0.1 Marshmallow upgrade
Enhanced Doze mode for better battery life
System wide performance improvements
Improved fingerprint sensor performance and recognition
New OnePlus Camera UI and AF optimization
MaxxAudio and Tuner have been removed. We have integrated with Dirac HD Sound technology for the speaker so you get a great experience without the knobs and dials
Shelf UX has been improved. You can now long press to edit a board
You can now lock apps in recents so they won't be cleared away. We've also added clear process in addition to clear-all for those of you who want a better control of background processes
Network operator selection will now stick to your choice so you don't accidentally roam onto unintended networks
Swiftkey update to 6.3.3
How to update from oxygen OS 3.0.1 and rooted with twrp
ashmeet094 said:
How to update from oxygen OS 3.0.1 and rooted with twrp
Click to expand...
Click to collapse
Just wait for the zip file.
Never heard of Dirac HD before, anyone knows why oneplus switched that for maxxaudio?
ashmeet094 said:
How to update from oxygen OS 3.0.1 and rooted with twrp
Click to expand...
Click to collapse
Flash OOS3.0.2 Community build zip, right after that flah 3.0.1 > 3.0.2 ZIP.
Flash SuperSU, reboot
Or if you're able to wait, wait a few days for the full zip.
Razertje said:
Flash OOS3.0.2 Community build zip, right after that flah 3.0.2 > 3.0.3 ZIP.
Flash SuperSU, reboot
Or if you're able to wait, wait a few days for the full zip.
Click to expand...
Click to collapse
3.0.3?
The latest one and final version is 3.0.2 ?
So i have to flash 3.0.1 again removing root and then flash 3.0.1>3.0.2?
Ribery771 said:
Just wait for the zip file.
Never heard of Dirac HD before, anyone knows why oneplus switched that for maxxaudio?
Click to expand...
Click to collapse
It's a shame they removed Maxxaudio, was one of the "prime features". Never heard of Dirac HD, hopefully it will fix the background hiss in the speaker.
Also, did they finally fix that horrible Bluetooth sound?
ashmeet094 said:
3.0.3?
The latest one and final version is 3.0.2 ?
So i have to flash 3.0.1 again removing root and then flash 3.0.1>3.0.2?
Click to expand...
Click to collapse
Typo =)
Yes that's correct!
Razertje said:
Typo =)
Yes that's correct!
Click to expand...
Click to collapse
Thanks buddy
2015? I think we got 2016
Thanks
Is encryption working ?
Sent from my ONE A2003 using Tapatalk
What's the baseband version?
Razertje said:
Flash OOS3.0.2 Community build zip, right after that flah 3.0.1 > 3.0.2 ZIP.
Flash SuperSU, reboot
Or if you're able to wait, wait a few days for the full zip.
Click to expand...
Click to collapse
Witch super super did you flash on the latest beta I got bootloop
Verstuurd van mijn ONE A2003 met xda Forums PRO
cabanas1 said:
Witch super super did you flash on the latest beta I got bootloop
Verstuurd van mijn ONE A2003 met xda Forums PRO
Click to expand...
Click to collapse
Try this one: https://www.androidfilehost.com/?fid=24459283995309091
For all can't wait
Install clean OOS3.0beta 2 with hybrid twrp
Enable stock recovery at boot session
Boot into ROM
Download ota
Install ota in stock recovery
Boot into bootloader
Flash hybrid recovery from PC y fastboot
Reboot into hybrid recovery
Install modified SuperSU
Have fun.
I´ve downloaded the ota file via software updates, but i doesn´t installed it. I flashed the old full zip and after the ota one via trwp, but after reboot the notificactions and software updates menu says, i should install the new download.. Phone Information says i´ve installed 3.0.2 with june Security fixes
Who can i delete the ota system download-file?
Update
I´ve found it with a youtube video
/sdcard/ -> Android/data/com.oneplus.ota/files/.OnePlusOta/
californicated said:
What's the baseband version?
Click to expand...
Click to collapse
Same that 3.0.1
Any bug?
Has anyone gotten the OTA till now
So, if I'm on 3. 0.1 can I just wipe system, dalvik & cache and flash 3.0.2 with twrp?
Sent from my ONE A2001 using Tapatalk
If you have the signed zip from @Spanaa: yes
miui_MINote2_8.6.1_b364d59a57_8.0 (MIUI 10) BETA Version
LANGUAGES: CHINESE / ENGLISH
I have it installed a day ago and at the moment it's going very well
Google installer v2.0 to install google play services
DOWNLOAD GOOGLE INSTALLER: https://www55.zippyshare.com/v/PNflCoDB/file.html
DOWNLOAD miui_MINote2_8.6.1_b364d59a57_8.0 (MIUI 10) BETA Version: https://bigota.d.miui.com/8.6.1/miui_MINote2_8.6.1_b364d59a57_8.0.zip
REGARDS
I know it is in beta stage so it has bugs, but do you think it can be used as a daily driver rom?
any screen shots, how performs, any major bugs, overall experience.
FontesR said:
I know it is in beta stage so it has bugs, but do you think it can be used as a daily driver rom?
Click to expand...
Click to collapse
Sipi1302 said:
any screen shots, how performs, any major bugs, overall experience.
Click to expand...
Click to collapse
Been using it for like 2-3 hours,working pretty solid till now without encountering any bug. Battery is a little off compared to xiaomi.eu but I guess maybe because it is the first charge cycle. I haven't done any gaming yet,so not sure about the heating situation. Camera also works fine.
so in short,Yes it is usable as a daily driver.
Based on the file name it's still Oreo 8.0 based right?
Pantherx12 said:
Based on the file name it's still Oreo 8.0 based right?
Click to expand...
Click to collapse
Yes......
Is OTA available if I do not have a beta account?
Can I install it with TWRP ?
Sent from my MI Note 2 using Tapatalk
Naxxÿ said:
Can I install it with TWRP ?
Sent from my MI Note 2 using Tapatalk
Click to expand...
Click to collapse
Yes.......
Before installing by twrp, disable device search and close your xiaomi account in the mobile, then restart in twrp and make full wipes included internal memory and format data, restart again in twrp and install
vcx77 said:
Yes.......
Before installing by twrp, disable device search and close your xiaomi account in the mobile, then restart in twrp and make full wipes included internal memory and format data, restart again in twrp and install
Click to expand...
Click to collapse
Thanks but I'm on lineage 15.1 atm so I guess I only need the wipes [emoji6]
Sent from my MI Note 2 using Tapatalk
After two days with it, no failure and smooth operation, very good battery and the perfect camera, no problem with any application, routed with magisk-v16.4 beta without problems
Is there a new bokeh mode in the camera?
mindenfrak said:
Is there a new bokeh mode in the camera?
Click to expand...
Click to collapse
No.
That's for phones that support bokeh mode by default.
Installed last night, all went smooth. The performance is stellar and every is working fine. Only issue I had was that somehow my TWRP recovery was overwritten by Xiaomi recovery.
Oh btw you don't need any Google installer APK you can just download the installer from the included Mi app store.
I will test out the rom today but I think I will restore my Lineage backup till the EU version is out....... the rom is great but there is way to much Chinese bloatware [emoji6]
Sent from my FDR-A03L using Tapatalk
Naxxÿ said:
Installed last night, all went smooth. The performance is stellar and every is working fine. Only issue I had was that somehow my TWRP recovery was overwritten by Xiaomi recovery.
Click to expand...
Click to collapse
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
alexmanu1 said:
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
Click to expand...
Click to collapse
To me this official MIUI does not overwrite me the twrp
This rom encrypted and
erased my phone?
vcx77 said:
To me this official MIUI does not overwrite me the twrp
Click to expand...
Click to collapse
Interesting haha . Normally it should've flashed you the MI Recovery. Are you using the official TWRP?
maxraf21 said:
This rom encrypted and
erased my phone?
Click to expand...
Click to collapse
That is what official MIUI does ...
Always have a backup of your stuff not in the phone.
I do not use the official twrp, I use this https://forum.xda-developers.com/mi-note-2/development/twrpscorpio3-2-1-1tools-6blue-t3798956
So that there are no problems if you are in MIUI make a backup and before putting the rom deactivate from the mobile the device search and the account of xiaomi
once done reboot in twrp and make full wipes internal memory included and format data (if it gives montage error restart twrp again and perform again full wipes and format data) restart in twrp again and install, should not give you any problem with encryption
I do it like that and have never given me problems
and I do not overwrite the twrp either
alexmanu1 said:
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
Click to expand...
Click to collapse
Yeh might be but i never installed official MIUI ROMs before this one. Anyway took me 30 sec to hook up ADB and then Fastboot flash TWRP back. I rooted with Magisk and now all is perfect might even stay on this if i can tweak a few things to my liking.