Here i found a perfect way to root your Samsung Galaxy A8 (SM-A800F) on Lollipop 5.1.1 along with installing Xposed without installing TWRP.
Prerequisite :
1. CF Autoroot SM-A800F
2. Latest Odin
3. xposed-uninstaller-20160211.zip
4 .Xposed-v80.0-sdk22-arm-custom-build-by-wanam-20160211.zip
5. Flashfire on play store
Steps :
1. Extract CF Auto root to your PC
2. Copy Xposed to your phone internal SD-card
3. Enable Developer option on your device, and then enable OEM unlock
4. Turn off your phone
Then..
1. Go to download mode by pressing Volume Down + Home + Power at the same time
2. Plug in your USB cable
3. Open Odin, make sure Auto-Reboot and Reset time checked
4. Click AP, and choose CF-Auto-Root-a8elte-a8eltejv-sma800f.tar.md5
5. Press start., wait until finished then the phone reboot
6. You are rooted with SuperSu installed
7. Open Flashfire
8. Tap + at the bottom right
9. Choose “Flash ZIP or OTA” and leave “Auto-mount” option unchecked
10. Tap checkmark to continue
11. Tap Everoot and make sure all unchecked
12. Leave Reboot to Normal mode
13. Hit the lightning button to continue. It took about 1 - 2 minutes to complete.
14. And your phone is Xposed.
sthetix said:
Here i found a perfect way to root your Samsung Galaxy A8 (SM-A800F) on Lollipop 5.1.1 along with installing Xposed without installing TWRP.
Prerequisite :
1. CF Autoroot SM-A800F
2. Latest Odin
3. xposed-uninstaller-20160211.zip
4 .Xposed-v80.0-sdk22-arm-custom-build-by-wanam-20160211.zip
5. Flashfire on play store
Steps :
1. Extract CF Auto root to your PC
2. Copy Xposed to your phone internal SD-card
3. Enable Developer option on your device, and then enable OEM unlock
4. Turn off your phone
Then..
1. Go to recovery mode by pressing Volume Down + Home + Power at the same time
2. Plug in your USB cable
3. Open Odin, make sure Auto-Reboot and Reset time checked
4. Click AP, and choose CF-Auto-Root-a8elte-a8eltejv-sma800f.tar.md5
5. Press start., wait until finished then the phone reboot
6. You are rooted with SuperSu installed
7. Open Flashfire
8. Tap + at the bottom right
9. Choose “Flash ZIP or OTA” and leave “Auto-mount” option unchecked
10. Tap checkmark to continue
11. Tap Everoot and make sure all unchecked
12. Leave Reboot to Normal mode
13. Hit the lightning button to continue. It took about 1 - 2 minutes to complete.
14. And your phone is Xposed.
Click to expand...
Click to collapse
btw volume down+home+power button is called download mode. recovery mode is different. And also your tutorial mentions xposed uninstaller. how to use uninstaller if phone bootloops and we don't have twrp recovery? :/
Sorry, my fault. I have edit it to download mode. Thx for correcting.
I don't find any boot loop. And if you do, then you can try reflashing the phone back to stock.
the original recovery is still there.
you can as well install TWRP but you will find that red kernel error on boot (enforcing).
and you can only boot to TWRP by using NDR utils -- not with buttons.
its the 6th time am getting into bootloop
sthetix said:
Sorry, my fault. I have edit it to download mode. Thx for correcting.
I don't find any boot loop. And if you do, then you can try reflashing the phone back to stock.
the original recovery is still there.
you can as well install TWRP but you will find that red kernel error on boot (enforcing).
and you can only boot to TWRP by using NDR utils -- not with buttons.
Click to expand...
Click to collapse
am using galaxy a8(sm-a800f) tried so many times
downloaded the file from chainfire official site but still i ran into bootloop not booting in recovery nor the phone boots up stuck at a place where logo and red texts saying kernal isnot seandroid enforcing....
and sick of flashing stock whole again n again why amnot i succeding??
i aint any newbie to root or use odin but still....??
can anyone help me please,....... :crying::crying:
hey mate, any luck with rooting on 6.0.1?
I got the red recovery is not se enforcing error and it gets stuck there... to make matters worse sammobile is down today for maintenance and I cant download a stock firmware for now...
cant find other threads about rooting the A800F please let me know if there is any... thanks...
prince Niks said:
am using galaxy a8(sm-a800f) tried so many times
downloaded the file from chainfire official site but still i ran into bootloop not booting in recovery nor the phone boots up stuck at a place where logo and red texts saying kernal isnot seandroid enforcing....
and sick of flashing stock whole again n again why amnot i succeding??
i aint any newbie to root or use odin but still....??
can anyone help me please,....... :crying::crying:
Click to expand...
Click to collapse
sthetix said:
Sorry, my fault. I have edit it to download mode. Thx for correcting.
I don't find any boot loop. And if you do, then you can try reflashing the phone back to stock.
the original recovery is still there.
you can as well install TWRP but you will find that red kernel error on boot (enforcing).
and you can only boot to TWRP by using NDR utils -- not with buttons.
Click to expand...
Click to collapse
hey there, does this xposed work on A800F with 6.0.1 marshmallow?
or is it only for lollipop?
thanks
great need of help from you guys...
i have a samsung a8(sm a800f vietnam, android 5.0.0) from my aunt but she had this phone for almost 2 years and gave it to me. i wanted to make it faster and maybe have an android 6.0.0 on it(if possible). im a super noob on this process but i already tried this thread and ([ROOT][TWRP][Xposed][New] Samsung Galaxy A8 (A800F/A800I) on 6.0.0)<< this too. hope you guys could help me i would very well appreciate it.
Related
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
not screwed
promoking said:
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
Click to expand...
Click to collapse
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
hope he follows up with a thank you.
milindchitale said:
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
Click to expand...
Click to collapse
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hii,
Finally I reached on TWRP. Can I copy the Stock ROM Zip file in Memory Card and then install memory card on phone. And from Install in TWRP I can go the SD Card location and install it from there? Possible ?
Actually there was no battery on phone that is why the phone was not booting up to TWRP mode. Now I'm in TWRP and downloading Stock ROM. Hope it get fixed soon.
Many Thanks and Regards
promoking said:
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Click to expand...
Click to collapse
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
adfurgerson said:
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
Click to expand...
Click to collapse
Hi,
Now I'm downloading ...
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
I guess this is original ATT LG E970 Firmware. I will copy it into my external Memory Card and then will insert into phone. After that using TWRP I'll be going to use this Zip file and after that factory reset. Am I correct ? Do I need to follow different steps ?
Let me know. Moreover do I need to unlock Phone again? When I received it was already in Unlocked State. So installing the above link firmware will lock it again? Or should I proceed with the link I posted earlier, I mean this ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
And Rename File to .bin instead of .tot and Make ZIP it again ?
Please let me know.
PS ; I'm still Downloading The firmware from Ist link.
Regards
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hi, I tried these ROMS,
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
and downloaded today ..
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
Both are not working. ON TWRP it is saying ..
MD5 File NOT FOUND
ZIP File Signature VERIFICATION FAILED
Error in Flashing Zip
Please help?
Edit : I also tried Unticking ZIP File Verification. But still it says .. "Error in Flashing Zip"
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
pottyvick said:
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
Click to expand...
Click to collapse
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
promoking said:
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
Click to expand...
Click to collapse
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
pottyvick said:
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
Click to expand...
Click to collapse
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
promoking said:
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
Click to expand...
Click to collapse
in fast boot, what happens when you push the volume down button?
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
promoking said:
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
Click to expand...
Click to collapse
push the volume buttons, it will change the recovery mode to other options... Push the volume buttons on the handset...
pottyvick said:
in fast boot, what happens when you push the volume down button?
Click to expand...
Click to collapse
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
promoking said:
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
Click to expand...
Click to collapse
sorry, you're right... have you tried to manually get into download mode?
Poweroff phone>connect usb cable to phone (not to computer yet)>hold down (both) volume up/volume down>connect usb to computer (while holding down volume buttons)
pottyvick said:
It gives you only those 4 options? there is no other option>?
Click to expand...
Click to collapse
No Sir, I get only these 4 options above that Green Figure.
promoking said:
No Sir, I get only these 4 options above that Green Figure.
Click to expand...
Click to collapse
I edited my comment sorry...
How To Flash CWM Recovery On Samsung Galaxy Star Pro Dous GT-S7262
Hello Guys I'm back xD
And today i'm gonna show you how to flash CWM Recovery .....
i dont want to talk too much hahaha let's start
Downloads:
1. Recovery.tar
2. Odin
Flashing Recovery:
1. Download the above both files.
2. Extract the Odin zip file.
3. Open the Odin
4. Turn off your device.
5. Turn it on in download mode by pressing Volume Down + Power Button + Home Button at the same time, dont leave buttons until a Warning screen appears, leave the buttons when Warning screen appears, and then press Volume Up button to continue to Download Mode.
6. Connect Your device to PC via USB Cable.
7. Added! message will be shown in message box of Odin.
8. Now in Odin click on PDA and choose the Recovery.tar zip file.
9. Then click Start. Your device will be flashed with a custom recovery.
HIT THANKS
JAWAD TWAM
اخي شو مشان انو عم يطلعلي شاشة بيضا
كل ما ادخول عل ريكفري صار يطلعلي شاشة بيضا و ما عم اقدر اظبطوا لو سمحت تساعدني
Working CWM Recovery for S7262
Here is the Link . . . . .. . Flash with Odin
https://drive.google.com/file/d/0B6xAzFVJYc3YbXlaaWNyenlpNkU/view?pli=1
why is the screen going white and nothing showing up while booting into recovery mode ?
the flashing of the recovery was a succes acording to odin.
giliwawa: Maybe your recovery.tar was corrupted... You can try another one, or come back to the stock one which can be extracted from a firmware update.
Odin link .......
;53331428 said:
Click to expand...
Click to collapse
Odin link not working
@Jawad Twam IDK if I used this guide to flash twrp recovery on my s7262 or not, cause it's been a long time.
I just wanted to ask why one can't get into recovery mode by pressing the hardware keys. Is it cause I installed twrp or is there anything else I'm missing? I did got into recovery mode through advance reboot in developers options tho. And download mode was working as well through hardware keys.
Gurkirat_Singh said:
@Jawad Twam IDK if I used this guide to flash twrp recovery on my s7262 or not, cause it's been a long time.
I just wanted to ask why one can't get into recovery mode by pressing the hardware keys. Is it cause I installed twrp or is there anything else I'm missing? I did got into recovery mode through advance reboot in developers options tho. And download mode was working as well through hardware keys.
Click to expand...
Click to collapse
Maybe the recovery file you flashed, is corrupted. Also, what shows on screen after booting into recovery.?
@Yogesh1969 no it wasn't corrupted. I wasn't pressing the buttons in the right pattern, which I didn't even knew existed by going through the guides given online(even on xda's numerous posts). This video helped me out https://www.youtube.com/watch?v=MP-mglw46h4&t=83s
It's all about proper pattern and timing. And no one mentions it neither on XDA nor on any other website. I tried to find the video through google search but rather I got other BS videos than this helpful one. It's thanks to the history option in youtube I was able to locate it.
If you press all the buttons at the same time, nothing happens. But if you do the same thing in the case of download mode then it works. Like What?? Then when you flash a custom recovery or even root your device, the red warning symbol doesn't shows up on the top left corner of the screen when device boots up, making me to believe that whatever I was doing wasn't working. Unless you install a custom rom or a rom with a custom kernel, then only that warning sign shows up.
It's just all big steaming pile of sh** that samsung created and other forgot to address.
My Rogers S6 edge W8 got an OTA OG2 yesturday so I went back to stock to get the new update. Now I want to root back but somehow the previous method of installing TWRP in odin, then flash SU and nosleep fix just doesnt work...actually only the recovery doesnt want to install. Odin tells me everything was a success, the phone seems to have installed TWRP but when I boot into recovery, it goes back to stock again.
Any ideas what could have gone wrong?
Also please dont suggest usuing CF-Auto root because it brick my phone every single time.
Here are the instructions I followed, the first time the process went without a hitch.
1. Download ODIN v 3.10.6 from http://forum.xda-developers.com/show....php?t=2711451 and extract it to a folder.
2. Download TWRP v2 by eousphoros (Odin Flashable Version) from https://mega.co.nz/#!aQhTnQRR!k-M-j9...swZO3CWYi0mMtI
3. Download the latest SuperSu Beta from http://forum.xda-developers.com/apps...v2-05-t2868133 and transfer it to your internal storage on the phone.
4. Download Deep-Sleep flashable fix from http://forum.xda-developers.com/show...7&postcount=56 and transfer it ot your internal storage on the phone.
5. Put your phone into Download Mode. Power Off, then hold Power+Home+VolDown. At the warning press VolUp to continue.
6. Connect your phone to your computer via the USB cable.
7. Launch ODIN.
8. You will see the text Added! in the status panel (left side).
9. Checkmark the box beside AP and then click on AP.
10. Browse to the TWRP tar.md5 file you downloaded earlier and select it.
11. Wait a few seconds for MD5 check to finish successfully.
12. Press Start. You will see the progress bar at the top and when it's complete status window will have message "All Threads Complete (Succeed 1, Failed 0)".
13. Boot into TWRP (Button combination Power+Home+VolUp) and then flash/sideload SuperSu beta zip and then the deep sleep fix zip that you have on internal storage.
14. Reboot to system. Congratulations, your phone is now rooted.
Click to expand...
Click to collapse
Did you uncheck Auto Reboot when you flash the recovery in Odin?
There is no such option with the newer odin
Sent from my SM-G925W8 using Tapatalk
I have heard that this update also breaks ping-pong root. We'll have to wait and see if those are updated
Ok, i found a fix. The problem was when i flashed recovery with odin, the custom recovery was overwritten as soon as the phone would boot back to system. I was able to keep TWRP installed by pressing Volume Up + Power + Home the second the recovery installation was finished and kept holding until Samsung Galaxy S6 edge logo appeared, then it booted me right in TWRP where I was able to flash SU and Sleep Fix.
I am using 3.10.6 and it has the option on one of the tabs on the left side. Yea, that's what I meant not to let it auto reboot. Reboot by holding Volume Down + Power + Home. When the screen goes back, hold Volume Up + Power + Home to boot into Recovery.
ShermanCheng said:
I am using 3.10.6 and it has the option on one of the tabs on the left side. Yea, that's what I meant not to let it auto reboot. Reboot by holding Volume Down + Power + Home. When the screen goes back, hold Volume Up + Power + Home to boot into Recovery.
Click to expand...
Click to collapse
Yeah. Sorry bud i was so used to it being in plain vue i didnt even see the tabs
Sent from my SM-G925W8 using Tapatalk
polish_pat said:
Yeah. Sorry bud i was so used to it being in plain vue i didnt even see the tabs
Click to expand...
Click to collapse
No problem at all. I am glad that you found the solution. I am still waiting on Rogers to update the W8 bootloader.
What is TWRP?
I quote
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
WHAT IS THE USE OF INSTALLING TWRP?
TWRP is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM.
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
The above text was from
https://twrp.me/about/
Download TWRP version 3.2.1-0 from
http://www.mediafire.com/file/0bhuw8gw233c3wa/twrp-3.2.1-0-degas.img.tar
HOW DO I INSTALL THE RECOVERY?
1.Download Odin from http://www.mediafire.com/file/sbobzdpre78l569/Odin3_v3.12.3.zip
STEP 1:
Put your phone into download mode.
Press and hold these three buttons until you see a WARNING SCREEN! to enter into the Download mode:
Volume DOWN key + Power key + Home key
When you see the WARNING SCREEN press the volume UP key to continue into the Download mode.
STEP 2:
Open the ODIN application on your PC. Connect your phone(while it is still in the download mode) to the PC using a USB cable.
ODIN will show an Added! message on the message box.
Device Added on ODIN
STEP 3:
Click on the AP button on the ODIN application and select the twrp-x.x.x-x-codename.img.tar file.
Click on the AP button (PDA in many Odin versions) and select the CWM recovery file
STEP 4:
Select the appropriate options before flashing the recovery image.Make sure only the Auto Reboot and F. Reset Time are checked and all other boxes are un-checked.
Select the ODIN Options
STEP 5:
Select the Start button, which will start the flashing process. When you get the PASS message, then your phone will reboot automatically.
Click on Start and wait till it completes
Now your Samsung Device is flashed with the TWRP image and you may disconnect your phone. Your phone should restart by itself if not press and hold the power button. Boot into your recovery by holding together power-volume up-and home button.
HOW TO UPDATE YOUR RECOVERY?
Your TWRP recovery can be easily updated by flashing an image file. It's very simple and easy.
1.Download the latest version of twrp. Make sure it is a .img file
Download it from http://www.mediafire.com/file/1q0oq8s8yykcxov/twrp-3.2.1-0-degas.img
2.Boot into the TWRP recovery
3.Press on install and then press install image
4.Click on recovery
5.And follow the instructions and that's it.
If you found this helpful, please give me a thanks. Have a nice day. Enjoy
All these files were obtained from TWRP's official site and from samsung odin. I own nothing and does not claim authority over these files. These files were uploaded to MediaFire for ease of access and for educational purposes.
Samsung Odin https://odindownload.com/
TWRP https://twrp.me/
Thedark night in the dark said:
What is TWRP?
I quote
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
WHAT IS THE USE OF INSTALLING TWRP?
TWRP is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM.
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
The above text was from
https://twrp.me/about/
Download TWRP version 3.2.1-0 from
[url]http://www.mediafire.com/file/0bhuw8gw233c3wa/twrp-3.2.1-0-degas.img.tar
HOW DO I INSTALL THE RECOVERY?
1.Download Odin from http://www.mediafire.com/file/sbobzdpre78l569/Odin3_v3.12.3.zip
STEP 1:
Put your phone into download mode.
Press and hold these three buttons until you see a WARNING SCREEN! to enter into the Download mode:
Volume DOWN key + Power key + Home key
When you see the WARNING SCREEN press the volume UP key to continue into the Download mode.
STEP 2:
Open the ODIN application on your PC. Connect your phone(while it is still in the download mode) to the PC using a USB cable.
ODIN will show an Added! message on the message box.
Device Added on ODIN
STEP 3:
Click on the AP button on the ODIN application and select the twrp-x.x.x-x-codename.img.tar file.
Click on the AP button (PDA in many Odin versions) and select the CWM recovery file
STEP 4:
Select the appropriate options before flashing the recovery image.Make sure only the Auto Reboot and F. Reset Time are checked and all other boxes are un-checked.
Select the ODIN Options
STEP 5:
Select the Start button, which will start the flashing process. When you get the PASS message, then your phone will reboot automatically.
Click on Start and wait till it completes
Now your Samsung Device is flashed with the TWRP image and you may disconnect your phone. Your phone should restart by itself if not press and hold the power button. Boot into your recovery by holding together power-volume up-and home button.
HOW TO UPDATE YOUR RECOVERY?
Your TWRP recovery can be easily updated by flashing an image file. It's very simple and easy.
1.Download the latest version of twrp. Make sure it is a .img file
Download it from http://www.mediafire.com/file/1q0oq8s8yykcxov/twrp-3.2.1-0-degas.img
2.Boot into the TWRP recovery
3.Press on install and then press install image
4.Click on recovery
5.And follow the instructions and that's it.
If you found this helpful, please give me a thanks. Have a nice day. Enjoy
Click to expand...
Click to collapse
You can also download all these files together by using this link
http://www.mediafire.com/folder/c3cd4fzs1zqp8/Samsung_Galaxy_Tab_4
It works. Try it out
Thedark night in the dark said:
You can also download all these files together by using this link
http://www.mediafire.com/folder/c3cd4fzs1zqp8/Samsung_Galaxy_Tab_4
It works. Try it out
Click to expand...
Click to collapse
Please tell me if you found this helpful
Thedark night in the dark said:
Please tell me if you found this helpful
Click to expand...
Click to collapse
I just followed your upgrade instructions and was successfully able to upgrade from TWRP 2.7.x and it works great! Results were instant and I was also able to immediately successfully flash a custom ROM to my SM-T230NU. Thanks so much for posting this!
redivivus613 said:
I just followed your upgrade instructions and was successfully able to upgrade from TWRP 2.7.x and it works great! Results were instant and I was also able to immediately successfully flash a custom ROM to my SM-T230NU. Thanks so much for posting this!
Click to expand...
Click to collapse
You are welcome.
If you are going to install a rom try this
https://forum.xda-developers.com/tab-4/development/sm-t230-nu-unofficial-cm-11-based-t3648887
or
this
https://forum.xda-developers.com/tab-4/development/rom-tranchidakat-v1-0-t3302042
If you found any other rom. You can flash that.
If you need Gapps or any instructions tell me
Have a nice day
Only 1 AP button
Thedark night in the dark said:
Click on the AP button on the ODIN application and select the twrp-x.x.x-x-codename.img.tar file.
Click on the AP button (PDA in many Odin versions) and select the CWM recovery file
Click to expand...
Click to collapse
This is where you lost me.
I have Odin v3.12, and it only has one AP button, but no PDA button.
I clicked on AP button in Odin, and selected the twrp image.tar file. Check.
Then you tell me to click on the AP button again and select the CWM file, but if I do that, then the twrp file is no longer selected.
I'm afraid to guess because even though it's old, I don't want to brick this thing.
kamikazeedriver said:
This is where you lost me.
I have Odin v3.12, and it only has one AP button, but no PDA button.
I clicked on AP button in Odin, and selected the twrp image.tar file. Check.
Then you tell me to click on the AP button again and select the CWM file, but if I do that, then the twrp file is no longer selected.
I'm afraid to guess because even though it's old, I don't want to brick this thing.[/QUOTE
wow]
yeah I would like to know the exact same thing. SOMEONE ANYONE . a response would be greatly appreciated
Click to expand...
Click to collapse
To get TWRP on my device, I followed the instructions listed here: tab-4/orig-development/twrp-install-twrp-root-samsung-galaxy-t3111934
(I can't post links. Just put forum.xda-developers in front of that)
Instead of using TWRP 3.0.0 or 2.8, I used this newest verison with Odin 3.09 (instead of 3.12)
And it worked on my T230NU
"SOMEONE ANYONE" ...those mysterious instructions entries...
i probably qualify as an anyone, that is im doing this for the first time, though i have some experience with doing the same thing to my old HP Touchpad (tenderloin) device over and over again over the years, to keep it from throwing up alerts about apps stopping... So yes i was confused by the same glitches in the instructions since i dont want to brick my old tablet and try to follow instructions exactly:
A) in STEP 2:
"Device Added on ODIN"
>> no Odin doesnt actually print those words out, i think the op is sort of restating the sentence above it.
B) in STEP 3:
"Click on the AP button (PDA in many Odin versions) and select the CWM recovery file"
>> I think this is just a copy/paste error the op took from some other post and never cleaned up, presumably CWM refers to ClockWorkMod which is different recovery in itself, and i don't suspect you can have two recoveries installed, no? plus, its not mentioned anywhere else in this thread no link of anything, so i just ignored that line and proceeded according to the rest of the instructions.
C) STEP 4:
"Select the ODIN Options"
>> another instance of repeating whats already been instructed in the sentence above it.
So I just ignored the items noted above, the only other thing i did that is different from this thread is i had previously installed the samsung USB drivers noted as seemingly important in other threads, i dont know if that matters since ive never tried it without them, but anyways, I hit 'start' and it worked fine and said PASS in about 5 seconds, then a bit later rebooted, but took a couple minutes to get out of the Samsung logo boot screen -i almost thought it was bricked for a moment there- but it finally came through and it all seems okay. so now i can reboot into TWRP and see all of its options, so now im ready to give a try to install the Pixelized OS!
For my T230NU, TWRP reboots (crashes) reliably in the middle of the wiping-the-cache process:
The TWRPs i tried are "twrp-3.0.0-0-degas.img.tar", "twrp-3.2.1-0-degas.img.tar" , "twrp-3.3.0-0-degas.img.tar"
I selected the usual four items to wipe: "Dalvic cache", "cache", "system", "Data"
(the built-in one-swipe factory-reset wipe crashes just the same)
I installed them all with Odin 3.12.3
This older version seems just fine: "openrecovery-twrp-2.8.0.1-degas.tar"
Will this image work with Verizon Tablet SM-T537V?
Hey, will this work on degaswifi (regular SM-T230)?
slap happy gas pedal said:
For my T230NU, TWRP reboots (crashes) reliably in the middle of the wiping-the-cache process:
The TWRPs i tried are "twrp-3.0.0-0-degas.img.tar", "twrp-3.2.1-0-degas.img.tar" , "twrp-3.3.0-0-degas.img.tar"
I selected the usual four items to wipe: "Dalvic cache", "cache", "system", "Data"
(the built-in one-swipe factory-reset wipe crashes just the same)
I installed them all with Odin 3.12.3
This older version seems just fine: "openrecovery-twrp-2.8.0.1-degas.tar"
Click to expand...
Click to collapse
Flashed it successfully on my SM-T230NU, however I am also experiencing a crash during a built-in wipe. I reverted back to v3.0.0 and it seems to be working as expected. Thanks,
Thedark night in the dark said:
What is TWRP?
I quote
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
WHAT IS THE USE OF INSTALLING TWRP?
TWRP is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM.
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
The above text was from
https://twrp.me/about/
Download TWRP version 3.2.1-0 from
http://www.mediafire.com/file/0bhuw8gw233c3wa/twrp-3.2.1-0-degas.img.tar
HOW DO I INSTALL THE RECOVERY?
1.Download Odin from http://www.mediafire.com/file/sbobzdpre78l569/Odin3_v3.12.3.zip
STEP 1:
Put your phone into download mode.
Press and hold these three buttons until you see a WARNING SCREEN! to enter into the Download mode:
Volume DOWN key + Power key + Home key
When you see the WARNING SCREEN press the volume UP key to continue into the Download mode.
STEP 2:
Open the ODIN application on your PC. Connect your phone(while it is still in the download mode) to the PC using a USB cable.
ODIN will show an Added! message on the message box.
Device Added on ODIN
STEP 3:
Click on the AP button on the ODIN application and select the twrp-x.x.x-x-codename.img.tar file.
Click on the AP button (PDA in many Odin versions) and select the CWM recovery file
STEP 4:
Select the appropriate options before flashing the recovery image.Make sure only the Auto Reboot and F. Reset Time are checked and all other boxes are un-checked.
Select the ODIN Options
STEP 5:
Select the Start button, which will start the flashing process. When you get the PASS message, then your phone will reboot automatically.
Click on Start and wait till it completes
Now your Samsung Device is flashed with the TWRP image and you may disconnect your phone. Your phone should restart by itself if not press and hold the power button. Boot into your recovery by holding together power-volume up-and home button.
HOW TO UPDATE YOUR RECOVERY?
Your TWRP recovery can be easily updated by flashing an image file. It's very simple and easy.
1.Download the latest version of twrp. Make sure it is a .img file
Download it from http://www.mediafire.com/file/1q0oq8s8yykcxov/twrp-3.2.1-0-degas.img
2.Boot into the TWRP recovery
3.Press on install and then press install image
4.Click on recovery
5.And follow the instructions and that's it.
If you found this helpful, please give me a thanks. Have a nice day. Enjoy
All these files were obtained from TWRP's official site and from samsung odin. I own nothing and does not claim authority over these files. These files were uploaded to MediaFire for ease of access and for educational purposes.
Samsung Odin https://odindownload.com/
TWRP https://twrp.me/
Click to expand...
Click to collapse
I have a SM-T230NU (nook). It freezes at boot after the "nook" logo screed is displayed. When I power down it immediately reboots to the same logo screen and again freezes. I can't turn it off without taking the back off and unplugging the battery. When I plug the battery back in after a few minutes, it stays off until I try to boot again and the same cycle repeats itself. Any ideas how to fix this.
ok guys, this is the easiest method for u guys who own a320y (ds) , maybe works with a320f version.
i have read many threads here according to gaining root for this device, but i got problem with twrp after flashing rom with odin. twrp cant mount /data
okay, here is the solution for u guys who dont have external sd card.
(READ IT CAREFULLY)
1. Download stock firmware related to your device (in this case, a320y/DS. but i think i t will working fine for a320f version)
2. Download Latest odin version from here https://odindownload.com/, and intall on your pc
3. Make sure u have adb installed on your pc, and also have samsung usb driver installed too. u can find it here
4. connect your device to pc on download mode (hold volume down , home, and power button until you see blue screen and press volume up button to go to download mode)
5. extract your firmware you download wherever you want.
6. open odin and you will see your device there. (something like 0:[com6])
7. choose the file you extracted (AP - AP , CSC - HOME CSC , BL - BL , CP - CP) , then un-tick the auto-reboot.
8. press start.
----------------------------------
9. when its done, disconnect your device, and connect it again.
10. press reset on odin
11. press ap button and select twrp file (.tar) = u can download twrp for our device here
12. untick auto reboot option again
13. press start.
---------------------------------
14.. when its done, force restart your device by pressing and hold vol down , home , power button until the screen is gone black. and the device will reboot to system.
---------------------------------
15. finish the setup for the first time, and enable the developer setting (go to about phone, software information and press build number 5-10 times)
16. press back button 2 times, and u will see developer option on the lowest screen.
17. go to developer option and enable OEM UNLOCK, disable auto update system, ENABLE USB DEBUGGING. see your phone screen, it will asking for usb debugging authorization. press yes
18. now go back to TWRP turning off your device, after the screen goes off, hold volume up, home button, and power button until u get inside twrp again.
19. download magisk zip here
20. press advanced button, and press sideload and enable it.
21. disconnect and reconnect your device to pc.
22. open CMD (win + R , and type CMD), now in command screen, type this
adb sideload yourdownloaddirectory/magisk-v16.0.zip
Click to expand...
Click to collapse
23. after the progress done, u can reboot your phone.
24. download magisk manager here and install on your phone, give permission to install the .apk file.
25. now your device is ROOTED, WITHOUT ANY LAG ON LOCKSCREEN, AND WITHOUT ANY PROBLEM WITH TWRP RECOVERY.
==i make this tutorial because i myself had facing the problem when installing twrp. after flashing the firmware and straight reboot to twrp, the /data folder is still mounted, but after reboot to system and back to twrp, it cant mount the /data anymore. so i need to wipe the data again and again. but after installing twrp and flashing the magisk.zip file , the problem with /data is gone. i dont need to wipe /data anymore :victory: and some people are facing the lag while unlocking screen with secured lockscreen (pattern/password) after rooting using chainfire.zip . but with magisk.zip , the lagg is gone forever ==
sorry for my english, but i think u guys can understand it.
Feel Free to ask me if u guys facing problem with this tutorial, i will help!
because many people here are helped me a lot for every problem i had, so i think this time is my time to helping others too
Is this guide for Nougat or Oreo?
AK2H said:
Is this guide for Nougat or Oreo?
Click to expand...
Click to collapse
ah yeah sorry, this tutorial is for Nougat version.
have not try oreo because still not released for my country.
Can I still use fingerprint to unlock the screen when rooting this way?
leo31 said:
ok guys, this is the easiest method for u guys who own a320y (ds) , maybe works with a320f version.
i have read many threads here according to gaining root for this device, but i got problem with twrp after flashing rom with odin. twrp cant mount /data
okay, here is the solution for u guys who dont have external sd card.
(READ IT CAREFULLY)
1. Download stock firmware related to your device (in this case, a320y/DS. but i think i t will working fine for a320f version)
2. Download Latest odin version from here https://odindownload.com/, and intall on your pc
3. Make sure u have adb installed on your pc, and also have samsung usb driver installed too. u can find it here
4. connect your device to pc on download mode (hold volume down , home, and power button until you see blue screen and press volume up button to go to download mode)
5. extract your firmware you download wherever you want.
6. open odin and you will see your device there. (something like 0:[com6])
7. choose the file you extracted (AP - AP , CSC - HOME CSC , BL - BL , CP - CP) , then un-tick the auto-reboot.
8. press start.
----------------------------------
9. when its done, disconnect your device, and connect it again.
10. press reset on odin
11. press ap button and select twrp file (.tar) = u can download twrp for our device here
12. untick auto reboot option again
13. press start.
---------------------------------
14.. when its done, force restart your device by pressing and hold vol down , home , power button until the screen is gone black. and the device will reboot to system.
---------------------------------
15. finish the setup for the first time, and enable the developer setting (go to about phone, software information and press build number 5-10 times)
16. press back button 2 times, and u will see developer option on the lowest screen.
17. go to developer option and enable OEM UNLOCK, disable auto update system, ENABLE USB DEBUGGING. see your phone screen, it will asking for usb debugging authorization. press yes
18. now go back to TWRP turning off your device, after the screen goes off, hold volume up, home button, and power button until u get inside twrp again.
19. download magisk zip here
20. press advanced button, and press sideload and enable it.
21. disconnect and reconnect your device to pc.
22. open CMD (win + R , and type CMD), now in command screen, type this
23. after the progress done, u can reboot your phone.
24. download magisk manager here and install on your phone, give permission to install the .apk file.
25. now your device is ROOTED, WITHOUT ANY LAG ON LOCKSCREEN, AND WITHOUT ANY PROBLEM WITH TWRP RECOVERY.
==i make this tutorial because i myself had facing the problem when installing twrp. after flashing the firmware and straight reboot to twrp, the /data folder is still mounted, but after reboot to system and back to twrp, it cant mount the /data anymore. so i need to wipe the data again and again. but after installing twrp and flashing the magisk.zip file , the problem with /data is gone. i dont need to wipe /data anymore :victory: and some people are facing the lag while unlocking screen with secured lockscreen (pattern/password) after rooting using chainfire.zip . but with magisk.zip , the lagg is gone forever ==
sorry for my english, but i think u guys can understand it.
Feel Free to ask me if u guys facing problem with this tutorial, i will help!
because many people here are helped me a lot for every problem i had, so i think this time is my time to helping others too
Click to expand...
Click to collapse
Do I have to perform steps 1-8 if I'm already in Nougat?
Has someone tried this on an SM-A320FL with Android 8.0 and SD card inserted?
simple_s said:
Has someone tried this on an SM-A320FL with Android 8.0 and SD card inserted?
Click to expand...
Click to collapse
It's works fine.