Related
I've been having this weird problem recently.
I originally was running an AOKP JB rom for a bit, working fine with CWM recovery. I decided to go back to a rooted touchwiz with CWM. I booted up odin and flashed the SU update from rootgalaxynote.com, nothing happened. Tried again, Nothing happened. I apparently have superuser access, but no Superuser app.
So I grabbed a CWM from here and threw it through ODIN, flashed it, I held down VOL UP and VOL DOWN while it was booting, boila, CWM boots up and my flash my SU.zip.
Boot up, everything is kosher and I have root, but the problem is, every time I try to boot up recovery NOW, I get the damn 3e one that does hardly anything.
any advice on what to do? I don't like flying with no landing gear.
The stock TW rom included a script that auto installed the 3e recovery when a boot sector modification is made.
It's an annoying little perk that Sammy added into the framework.
The fix involves a boot at the proper time during the root process.
I believe the steps can be found in the super thread under the ICS root instruction threads.
Easy fix ..really annoying safety mechanism ....g
Figured as much. It's kinda hard coming from HTC, they don't seem to care what you do with your device.
You've been thanked.
steamdnt said:
Figured as much. It's kinda hard coming from HTC, they don't seem to care what you do with your device.
You've been thanked.
Click to expand...
Click to collapse
I stopped buying HTC phones because of their s-on and locked bootloader policy. Samsung is by far easier to modify. Its also very hard to brick (your recovery automatically reinstalling is an example)
Anyway, for your issue, after you get the green box from Odin, you do a battery pull to interrupt that script.
Thanks ranger ...
I remembered the script, but not the process ....
Old guy here ...LOL
Thank you Sir ...g
---------- Post added at 10:53 PM ---------- Previous post was at 10:47 PM ----------
steamdnt said:
Figured as much. It's kinda hard coming from HTC, they don't seem to care what you do with your device.
You've been thanked.
Click to expand...
Click to collapse
My last device was the inspire 4g...and if not for the famous "random reboot" issue, I'd still be using it...
They even have android 4.2 for it ......sigh
However ...the note 1 is impressive, and I have enjoyed this device more than the past 10 combined.
Thank you in return ....g
wish i could remember the exact process but i recall the i717M had a similar issue but it was resolved by pushing a different tar or image file onto it.
I recall stumbling on it either here; http://rootgalaxynote.com/
or in xda's i717m areas. good luck.
Be careful with that site. Many have come here after they flashed GB kernel onto ICS and vice-versa.
Make sure you read carefully.
The script only affects Canadian phones that were updated OTA. Here is the link to tell you how to get around the script.
http://forum.xda-developers.com/showthread.php?t=1775263
I have been trying to update my S4 (vruame7) to the latest. I'm willing to lose root. The issue I'm having though is one that NOBODY seems to have mentioned anywhere: It started where I couldn't update over the air as the update fails. So I tried to update it with Kies on my mac but the program says I need more memory on my phone even though I already have it. This prompted me to unroot my phone and do the update again, but the issue is still there. So I tried booting into recovery and that worked. I decided then to reboot my phone and add CWM touch via ROM toolbox Pro. It said it worked fine, but now I cannot boot into the recovery mode. It just goes straight into ODIN mode and it won't prompt me to confirm it or not. I get into a very soft boot loop if I try and reboot though Rom Toolbox Pro to go into the recovery. I will land in ODIN and then unless I tell the phone manually to go into ODIN and then NOT proceed than it will be in a soft boot loop. So far I've tried unrooting and using Kies, Rooting and trying to load CWM onto my phone and failing, causing OTA to not be able to even start installing, and I've yet tried to go into safe mode and try to reset my phone that way. I might have to do that. if anyone has any other ideas I am open to that.
Your on me7 so you half to use safestrap that's the on way you can have a recover...... You probably half to Odin your phone back to me7 for the update to work. You can't use cwm or twrp on me7, unless u have safetrap installed and the its a version of twrp in it
hyperdrive powered s4
ebsk8er06 said:
Your on me7 so you half to use safestrap that's the on way you can have a recover...... You probably half to Odin your phone back to me7 for the update to work. You can't use cwm or twrp on me7, unless u have safetrap installed and the its a version of twrp in it
hyperdrive powered s4
Click to expand...
Click to collapse
Thanks. I've got safestrap installed sucessfully (it was so easy), and I'm now trying to install the update by wiping my phone and then doing it. I'll see if that works.
Well, it looks like I may have wiped my phone too far as I'm stuck at the Samsung custom logo and It's not booting farther. i can get into odin but I have a mac, so what do I do?
beez1717 said:
Well, it looks like I may have wiped my phone too far as I'm stuck at the Samsung custom logo and It's not booting farther. i can get into odin but I have a mac, so what do I do?
Click to expand...
Click to collapse
Heimdall is like odin but its mac.compatible
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Use oden or Heimdall (guess its a Mac thing) to flash back to stock and then you can take the update. You haven't bricked yet but it sounds like you are getting close so be careful.
beez1717 said:
Well, it looks like I may have wiped my phone too far as I'm stuck at the Samsung custom logo and It's not booting farther. i can get into odin but I have a mac, so what do I do?
Click to expand...
Click to collapse
Sounds like you did a full wipe on non safe side "stock rom" of safestrap so your gonna have to flash a whole factory image cause it all gone the whole os
So after working for hoursx and hours, of working at it, I finally found http://sonofgeektalk.wordpress.com/2013/06/13/heimdall-on-a-mac/ <-- that webpage and it helped walk me through using Helmdall and it worked after much fiddling and discovering that I had to plug in my phone AFTER it got into odin but BEFORE I confirmed I wanted to be in odin. I then had to not wipe the phone clean but just do the install with the right files. It worked and I'm so happy. Now to see if I can update the darn phone. Don't know if I can or not but hey, I've got my phone back up and running and that's a GOOD thing.
I don't care about root as much as I care about getting the latest software if it provides enhancements I like, or security features I want. I think that root is fun, but it can be a pain in the butt as I just saw. Now that I know how to do the whole shtick, I should be able to do a lot more with my phone. I remember when I had to learn the ins and outs of my old Xperia Play. Horrible battery life and sub-par graphics chip but an awesome phone that had an awesome utility that could do just about anything with the phone with minimal work.
Looks like the system is updating itself just fine using OTA. What a LONG workaround I had to do. Thank you all for helping me teach myself a lot more about my phone
I'm having trouble trying to update as well. I unrooted and did a factory reset but the update still fails. What should I be trying?
Sent from my SCH-I545 using xda app-developers app
beez1717 said:
So after working for hoursx and hours, of working at it, I finally found http://sonofgeektalk.wordpress.com/2013/06/13/heimdall-on-a-mac/ <-- that webpage and it helped walk me through using Helmdall and it worked after much fiddling and discovering that I had to plug in my phone AFTER it got into odin but BEFORE I confirmed I wanted to be in odin. I then had to not wipe the phone clean but just do the install with the right files. It worked and I'm so happy. Now to see if I can update the darn phone. Don't know if I can or not but hey, I've got my phone back up and running and that's a GOOD thing.
I don't care about root as much as I care about getting the latest software if it provides enhancements I like, or security features I want. I think that root is fun, but it can be a pain in the butt as I just saw. Now that I know how to do the whole shtick, I should be able to do a lot more with my phone. I remember when I had to learn the ins and outs of my old Xperia Play. Horrible battery life and sub-par graphics chip but an awesome phone that had an awesome utility that could do just about anything with the phone with minimal work.
Click to expand...
Click to collapse
I think the problem here was that you tried to take an official update AFTER you messed with your phone... you should take this as a lesson to always flash back to stock before trying any 'official' updates, or better yet just have some patience for the updated files to show up here on the forums so you don't have to deal with OTAs at all. I don't really see the big rush to get the newest MI1 update anyway, it really doesn't provide any huge benefits at all and plus will possibly void your warranty through that stupid Knox thing if you try to root.
One thing I've learned is use patients dont jump the gun and if your not sure before you do something look here cause someone has already screwed up so the right way will be here somewhere and video will be on youtube!!
I'm gonna go out on a limb here & ask a question that's been on my mind for a while, so bear with me. But first, let me give you some background so there's no confusion & no unnecessary questions asked. I'm by no means a "pro" at modifying my Note 3, I just follow instructions carefully & then implement those directions to achieve results. That's how I rooted my Note 3 but could still care less that I tripped Knox in the end.
I have the 32 GB Sprint Galaxy Note 3 with an 8 GB microSD. It's rooted using Chainfire's method. I also have TWRP for a recovery, but I'm using the stock Sprint ROM that came with it. I have a few root apps installed (Titanium backup, AdAway & Root Explorer) but the rest are what Sprint (& Android) put in there, minus a few that are totally unnecessary for me...(chat apps, picture drawings, step counting & so on) that were removed with Titanuim. It's still on 4.3 Jellybean with PUBMJ4 baseband. I also have the Wi-Fi hotspot fixed through 2 file replacements using Root Explorer.
Now that you know what I have, onto the question...
I see many, many ROMs in other threads that I'd like to try out, but don't know how to go about doing this. Before you jump right in & answer, here's my problem. If I try a ROM but don't like it, or it doesn't suit my needs, how can I go about going back to what I have now in the best (& fewest) steps necessary? In other words, to go back to exactly what ROM I have now, the apps installed, baseband, the whole nine yards. Just like a computer backup, it's a bit-for-bit restore, completely mirroring the hard drive. Understand?
Maybe you could explain to me like I'm seven years old what apps I need, what procedures are taken, the order in which they happen & so on. If I need an app or two to do just this, I have approximately $20 Google Play credit left.
Can a DEV or an experienced person that's done just this help a fellow out? Don't get me wrong, the stock ROM I'm using works for me, but there's ROMs posted that look just awesome! It's all about "personalization", am I right?
Easy, since you have a custom recovery installed (twrp) , you simply do a "nandroid" backup (I personally like to backup to an external SD card, so get a bigger one) before wiping and installing something new. If you like what you got, fine. If you want to go back, wipe and restore! Easy Peasy!
Sorry, being a father means sometimes your time suddenly becomes unavailable. But believe me, it's really easy once you figure out twrp.
I'll let another fine member get more details if you actually need them. ?
Sent from my calculator watch.
So did you figure it all out?
Sent from my SM-N900P using Tapatalk
kingdazy said:
Easy, since you have a custom recovery installed (twrp) , you simply do a "nandroid" backup (I personally like to backup to an external SD card, so get a bigger one) before wiping and installing something new. If you like what you got, fine. If you want to go back, wipe and restore! Easy Peasy!
Sorry, being a father means sometimes your time suddenly becomes unavailable. But believe me, it's really easy once you figure out twrp.
I'll let another fine member get more details if you actually need them. ?
Sent from my calculator watch.
Click to expand...
Click to collapse
Doing a Nandroid backup as we speak! I didn't realize TWRP could do that. (duh! ) I only installed TWRP because I just liked the name of it. TWERP!! (gotta nice sound to it, doesn't it??) Thanks a bunch! :good:
tonyevo52 said:
So did you figure it all out?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
I did. I found a Youtube link on how to do a TWRP backup on the Sprint Note 3. Easy Peasy as said above! I'll try some ROMs this weekend (can't promise nuthin' cause it's gonna be 70 degrees this weekend & I'm itchin' to ride my mountainbike along the boardwalk at the Virginia Beach.)
But now that the hard part is outta the way, it's all easy street from here!
Just be sure to Please, oh god Please, read all instructions on any rom you decide to try. Doesn't hurt to read the last 10 pages of each too, get an idea of Current issues that may not be documented in the OP.
And don't get lazy, follow word for word. The only times I f*cked stuff up was when I didn't follow instructions (ie, thought my experience meant I knew best), or just got sloppy.
And, don't forget to wipe! (I wipe 3X, everytime, as a habit. Some people will give you reasons why that's unnecessary, but I can say confidently, if perhaps anecdotally, that I Never have the issues others have with bad flashes, softbricks, FCs, etc.)
Something to get comfortable with, even though you may never need it is ODIN. It's most common use is a utility for flashing stock ROMs and firmwares, great for recovery from bad things. Again, you may never need it, but have it ready in your Pc with a stock ROM file, just in case.
Finally, Titantium Backup can be your best friend, if used properly. It can also be a real pain, so don't become too dependant on it.
FIN
Sent from my calculator watch.
kingdazy said:
Just be sure to Please, oh god Please, read all instructions on any rom you decide to try. Doesn't hurt to read the last 10 pages of each too, get an idea of Current issues that may not be documented in the OP.
And don't get lazy, follow word for word. The only times I f*cked stuff up was when I didn't follow instructions (ie, thought my experience meant I knew best), or just got sloppy.
And, don't forget to wipe! (I wipe 3X, everytime, as a habit. Some people will give you reasons why that's unnecessary, but I can say confidently, if perhaps anecdotally, that I Never have the issues others have with bad flashes, softbricks, FCs, etc.)
Something to get comfortable with, even though you may never need it is ODIN. It's most common use is a utility for flashing stock ROMs and firmwares, great for recovery from bad things. Again, you may never need it, but have it ready in your Pc with a stock ROM file, just in case.
Finally, Titantium Backup can be your best friend, if used properly. It can also be a real pain, so don't become too dependant on it.
FIN
Sent from my calculator watch.
Click to expand...
Click to collapse
No worries! As I said in the OP, I follow directions carefully. I read everything.
Odin is my friend as well. I have it installed on my laptop. That's how I flashed basebands & deodexed stock rooted ROMs on my Galaxy S III. I also have the original stock Sprint ROM for this GN3 "just in case", in a folder sitting on my desktop with a few extra tools. I've never bricked a phone, unless you count using Samsung's online update (can't think of the name at the moment). It said 4.3 was available, so I downloaded it. It flashed, rebooted, but stuck there. Never finished the boot, just gave me an error code. Samsung's own update killed my GS3 & was unrecoverable. Believe me, I tried everything. What was strange, was the ROM was 4.3 but the baseband was the previous version, not the newer one, so the phone just puked. It never updated the baseband so it bricked. Now, I tried (and used) different radios with no problems before the update. Everything worked in harmony. Go figure!
Time for sleep my friend. Gotta work in the morning!
This is a Backup of the PH1 ROM's system and modem partitions. This is a Pre-Rooted ROM with the SD Card write permissions fix. This is different from my other post in those two differences.
You will need a custom recovery to install this ROM. (http://forum.xda-developers.com/note...lipop-t3089382)
Always perform the appropriate backups and other steps just in case something messes up. If you are on Lollipop, you should be able to just flash and go without any data loss (except custom system apps), but no promises.
Extract the folder (ES File Explorer or 7 Zipper) to "extsdcard/TWRP/backups/[serial number]" then boot into recovery and restore the image. The easiest way to get this folder is to simply perform a backup first, then unzip this folder next to the one for the backup you just created.
I didn't factory reset prior to this backup because it's just system partitions, so let me know if there's anything weird.
https://drive.google.com/open?id=0B2iEgzRTFjrQa2JEbE1DSE9qNHM
Here's the Odin ROM:
http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178/page1
Here's my non-rooted TWRP ROM:
http://forum.xda-developers.com/not...stom-recovery-rom-stock-rooted-t3449321/page1
Still 5.0 this is probably just a security update
RDF
http://device.sprintpcs.com/Samsung/SM-N900P-SPRINT/PH1.rdf
evilvoice said:
Still 5.0 this is probably just a security update
RDF
http://device.sprintpcs.com/Samsung/SM-N900P-SPRINT/PH1.rdf
Click to expand...
Click to collapse
Yep, just a security update most likely. Looks like some of the stock (Sprint) apps may have been updated as well . The update file was only about 190 megabytes if I remember correctly.
Quick question on updating modem & firmware.. I'm stock rooted ok2, and i dont have this update yet. I am working toward flashing the newly released and highly anticipated DL Modded N5N7 v4 which requires the PH1 updated firmware.
Do I need to ODIN flash the update files from the other PHI ROM thread or can I just do a full wipe and flash this backup with TWRP?
Thanks in advance.
Sent from my SM-N900P using XDA Labs
MeAtKeRtN said:
Quick question on updating modem & firmware.. I'm stock rooted ok2, and i dont have this update yet. I am working toward flashing the newly released and highly anticipated DL Modded N5N7 v4 which requires the PH1 updated firmware.
Do I need to ODIN flash the update files from the other PHI ROM thread or can I just do a full wipe and flash this backup with TWRP?
Thanks in advance.
Sent from my SM-N900P using XDA Labs
Click to expand...
Click to collapse
You can just flash the rom you want and keep your current bootloader/modem. But it's always suggested to keep current with any bootloader/modem, that the OP mentioned. That way if there is a issue with the install, it wouldn't be that.
Sent from my Nexus s using XDA-Developers mobile app
jhunt75 said:
You can just flash the rom you want and keep your current bootloader/modem. But it's always suggested to keep current with any bootloader/modem, that the OP mentioned. That way if there is a issue with the install, it wouldn't be that.
Sent from my Nexus s using XDA-Developers mobile app
Click to expand...
Click to collapse
The preferable answer would have been 'NO' or 'I'M NOT SURE' as a direct answer to my very specific question... as I now have a phone that doesn't make phone calls.
MeAtKeRtN said:
The preferable answer would have been 'NO' or 'I'M NOT SURE' as a direct answer to my very specific question... as I now have a phone that doesn't make phone calls.
Click to expand...
Click to collapse
Hey, I've seen you in a few threads and figured I ask before I made the same mistake. I'm looking to upgrade to DL Modded N5N7 v4 like yourself. I have a exploding Note 7 still and I'm anticipating being blacklisted at some point. As crazy as it sounds I like my Note 3's snappiness and everything else over the 7. My issue is my Note 7 radio gets 4g in my job and my Note 3 radio is 3g or spotty. I'm sure my modem and baseband is outdated and may help being updated
I'm on a older Moars Rom Baseband Nk4 android version 4.4.2. Did you figure out where things went bad. I was thinking of following these instructions http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178 don't want to mess this up.
What did you use and what should you have used?
Thanks
Lyvewire said:
Hey, I've seen you in a few threads and figured I ask before I made the same mistake. I'm looking to upgrade to DL Modded N5N7 v4 like yourself. I have a exploding Note 7 still and I'm anticipating being blacklisted at some point. As crazy as it sounds I like my Note 3's snappiness and everything else over the 7. My issue is my Note 7 radio gets 4g in my job and my Note 3 radio is 3g or spotty. I'm sure my modem and baseband is outdated and may help being updated
I'm on a older Moars Rom Baseband Nk4 android version 4.4.2. Did you figure out where things went bad. I was thinking of following these instructions http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178 don't want to mess this up.
What did you use and what should you have used?
Thanks
Click to expand...
Click to collapse
My mistake was following bad advice and flashing the TWRP Backup of PH1 in the OP of this thread instead of ODIN flashing the full ROM-ODIN-PH1- Update- t3463178.
I was able to get TWRP to restore my backup to OK2. From there I did a full wipe 3x and ODIN flashed the full PH1 update, immediately rooted with CFautoroot and reinstalled TWRP 2.8.7.0.
From there I followed the OP instructions in the DL Modded N5N7 thread which require the ROM, Kernel Cleaner, MVNO Buzbee2, Sprint VVM, and I installed the DL MM UIX Kernel.
The ROM and kernel are both really well put together except my mobile network connection to Sprint has been intermittent... the phone was stuck roaming and was connecting in spurts with Verizon, sprint, or the network was unavailable.
I just dirty flashed the Rom, Kernel, and MVNO fix an hour or so ago and the APNs seem to be sticking now. We'll see.
I have three Note 3's and each has its own quirky 'personality'- not especially playing nicely with most of the Port ROMs available these days. Hope this answers your questions and helps someone else trying to keep their Note 3 thriving.
MeAtKeRtN said:
The preferable answer would have been 'NO' or 'I'M NOT SURE' as a direct answer to my very specific question... as I now have a phone that doesn't make phone calls.
Click to expand...
Click to collapse
I am not trying to start any trouble, but from reading your comment it seems you are suggesting I gave you bad or wrong advice. So I want to explain myself just in case it was a misunderstanding. All roms are capable of being flashed with older bootloaders and modems. But the proper thing to do, is to always be up to date with all bootloader/modem files. This way you will not run into any problems. Now I didn't mention anything about flashing the OP'S twrp backup method. I figured you may have been experienced enough to flash these BL/modem files from a source like sammobile. Then proceed to flash your rom of choice. As you experienced you lost your signal. It may have been a few reasons why this happen. 1. The way the OP mentioned to flash wasn't meant for your phone. Every phone response differently. 2. The rom for whatever reason can only be used if you dirty flashed over your current system. This will not be the only time you may have to do it this way. So instead of being sarcastic with your reply, maybe try and ask the one who is helping you to explain themselves more. We are all here to help each other, and by no means was my response to your question was meant to harm your phone.
Sent from my SM-N920C using XDA-Developers mobile app
jhunt75 said:
I am not trying to start any trouble, but from reading your comment it seems you are suggesting I gave you bad or wrong advice. So I want to explain myself just in case it was a misunderstanding. All roms are capable of being flashed with older bootloaders and modems. But the proper thing to do, is to always be up to date with all bootloader/modem files. This way you will not run into any problems. Now I didn't mention anything about flashing the OP'S twrp backup method. I figured you may have been experienced enough to flash these BL/modem files from a source like sammobile. Then proceed to flash your rom of choice. As you experienced you lost your signal. It may have been a few reasons why this happen. 1. The way the OP mentioned to flash wasn't meant for your phone. Every phone response differently. 2. The rom for whatever reason can only be used if you dirty flashed over your current system. This will not be the only time you may have to do it this way. So instead of being sarcastic with your reply, maybe try and ask the one who is helping you to explain themselves more. We are all here to help each other, and by no means was my response to your question was meant to harm your phone.
Click to expand...
Click to collapse
No misunderstanding here... I asked a specific either/or question directly related to the thread topic (twrp custom recovery version) and you either misunderstood my question or decided it required an answer other than a 'yes or no' As a result of your longwinded answer, I lost several hours working through how to get a signal back on my phone. Was pretty annoying.
MeAtKeRtN said:
No misunderstanding here... I asked a specific either/or question directly related to the thread topic (twrp custom recovery version) and you either misunderstood my question or decided it required an answer other than a 'yes or no' As a result of your longwinded answer, I lost several hours working through how to get a signal back on my phone. Was pretty annoying.
Click to expand...
Click to collapse
I never knew giving someone detailed information was a problem. It's funny how I never had an issue with the install, but you did. It seems you lack enough experience to realize a few things. But I will make it a point to never help you again. Whether that's to long-winded or not for you, oh well.
Sent from my SM-N920S using XDA-Developers mobile app
MeAtKeRtN said:
No misunderstanding here... I asked a specific either/or question directly related to the thread topic (twrp custom recovery version) and you either misunderstood my question or decided it required an answer other than a 'yes or no' As a result of your longwinded answer, I lost several hours working through how to get a signal back on my phone. Was pretty annoying.
Click to expand...
Click to collapse
Did you get it all figured out?
I did get it figured out. Wasn't much more than an unnecessary inconvenience that someone else might be able to avoid.
Ok, so something weird...
Im running KK4.4.2 with the NC5 baseband on Sprint.
I upgraded my TWRP to 2.780 to flash the recovery both first time 'dirty flashing' and the 2nd time doing a facory wipe.
I removed the battery after the flash.
When I reboot, the phone stays on the Yellow Sprint screen and the LED pusles blue slowly. So far been doing it for 15 mintues.
What am I missing?
Dave
Unidave199 said:
Ok, so something weird...
Im running KK4.4.2 with the NC5 baseband on Sprint.
I upgraded my TWRP to 2.780 to flash the recovery both first time 'dirty flashing' and the 2nd time doing a facory wipe.
I removed the battery after the flash.
When I reboot, the phone stays on the Yellow Sprint screen and the LED pusles blue slowly. So far been doing it for 15 mintues.
What am I missing?
Dave
Click to expand...
Click to collapse
Give it 30 minutes? It seriously takes a long time. Are you sure you want to upgrade to lollipop? In just asking because you've been on Kit Kat long after support for lollipop or this phone has long stopped. I'd suggest downloading the latest Odin and flashing that instead, unless there is something here you wanted? I'm rooted on PL1 and have no issues other than my phone being as old as it is and how many times it's been flashed.
evilvoice said:
Give it 30 minutes? It seriously takes a long time. Are you sure you want to upgrade to lollipop? In just asking because you've been on Kit Kat long after support for lollipop or this phone has long stopped. I'd suggest downloading the latest Odin and flashing that instead, unless there is something here you wanted? I'm rooted on PL1 and have no issues other than my phone being as old as it is and how many times it's been flashed.
Click to expand...
Click to collapse
30 minutes? Woah that is a long time. Ok I will give it a try sometime when I go to bed.
I am mainly trying to get the PL1 update and not mess with Odin if I can get around it. I would like to try and port the Darklord Marshmellow ROM and take advantage of built in google assistant
So I thought I would try them. And always get back if I need to but wanted to keep the PL1 modem updates.
I only have one problem with one other phone user... She doesnt always get my texts and I dont always get hers. I dont know if others arent getting them and just dont know but my 1 friend I text a lot so she notices when there is a gap.
Anyways. Just feeling out how I can maximize this phone's performance. NO plans on changing phones anytime soon.
Unidave199 said:
30 minutes? Woah that is a long time. Ok I will give it a try sometime when I go to bed.
I am mainly trying to get the PL1 update and not mess with Odin if I can get around it. I would like to try and port the Darklord Marshmellow ROM and take advantage of built in google assistant
So I thought I would try them. And always get back if I need to but wanted to keep the PL1 modem updates.
I only have one problem with one other phone user... She doesnt always get my texts and I dont always get hers. I dont know if others arent getting them and just dont know but my 1 friend I text a lot so she notices when there is a gap.
Anyways. Just feeling out how I can maximize this phone's performance. NO plans on changing phones anytime soon.
Click to expand...
Click to collapse
I still use my note 3. Granted not for main phone as I switched to iPhone, but I use it every day. I don't really know the hesitation of using Odin, but to each their own. If you did decide to use Odin, I'd flash the ROM, boot it, go to download mode again, flash TWRP, boot recovery (so it sticks and doesn't go back to stock recovery), flash SuperSU, done. You're rooted on PL1. Hopefully you have already backed up your text messages and other various things to either SDCard or something else. I'm not sure if that survives whether you wipe and flash clean or Odin. Depending on provider, that could be your issue with text messages. If you're with Sprint, check that you are on latest PRL. If not, make sure APN settings are correct.
If you're only looking for Assistant, I had it running on stock PL1. XDA did a blog post about enabling it in Lollipop, so once you upgrade, check it out. I couldn't stay on Marshmallow. Being that these are ports and not specifically built for our phone, I ran into issue with every single ROM either not being able to place calls, text (MMS actually), or wireless/data not working. No matter what I changed APN to, I would always have issues. Some do not. I just can't recommend a port when they haven't worked for me. Some roms have been abandoned, which meant if I found one that I could at least handle, it was so outdated that it was unusable (issues had arisen and the developer had moved on so they weren't being fixed). By handling a rom, I mean that after I upgraded to iPhone, I only needed wireless to work (to connect to hotspot) and it not go into a boot loop or crash all the time (some do). Those roms I have no idea if calls or text work because I wasn't using that. A lot have issues with wireless working.
One more thing you can try is to do a flash, wait about 30 minutes. If it still doesn't boot, pull the battery and reboot into recovery. Wipe data and cache and reboot again. It should boot. It'll still take a long time. Make sure you wait the 30 minutes before pulling the battery (it should have finished upgrading your system by then). Do note that first boot from now on will take forever no matter if it's a port or stock. Lollipop and higher take a long time to upgrade. I've only had 1 or 2 roms take around 5 minutes and that's because they were minimalist and without Google apps. The phone does get a little warm and uses a lot of battery, so I'd keep it plugged in.
Please report back if you got it to work and how. Like I said, I still use mine. I still visit this forum every day even though I've had an s5 and an s7 edge. I love this phone. I need to get mine replaced because I've worn it out: broken charger port so I have to make sure the cable is plugged in a certain way and I can't touch the phone while charging, side molding is broken off in places, some of my partitions can't be changed which means the memory is failing (not even Odin flashes correctly anymore let alone custom roms). But, it still keeps on ticking.
evilvoice said:
I still use my note 3. Granted not for main phone as I switched to iPhone, but I use it every day. I don't really know the hesitation of using Odin, but to each their own. If you did decide to use Odin, I'd flash the ROM, boot it, go to download mode again, flash TWRP, boot recovery (so it sticks and doesn't go back to stock recovery), flash SuperSU, done. You're rooted on PL1. Hopefully you have already backed up your text messages and other various things to either SDCard or something else. I'm not sure if that survives whether you wipe and flash clean or Odin. Depending on provider, that could be your issue with text messages. If you're with Sprint, check that you are on latest PRL. If not, make sure APN settings are correct.
If you're only looking for Assistant, I had it running on stock PL1. XDA did a blog post about enabling it in Lollipop, so once you upgrade, check it out. I couldn't stay on Marshmallow. Being that these are ports and not specifically built for our phone, I ran into issue with every single ROM either not being able to place calls, text (MMS actually), or wireless/data not working. No matter what I changed APN to, I would always have issues. Some do not. I just can't recommend a port when they haven't worked for me. Some roms have been abandoned, which meant if I found one that I could at least handle, it was so outdated that it was unusable (issues had arisen and the developer had moved on so they weren't being fixed). By handling a rom, I mean that after I upgraded to iPhone, I only needed wireless to work (to connect to hotspot) and it not go into a boot loop or crash all the time (some do). Those roms I have no idea if calls or text work because I wasn't using that. A lot have issues with wireless working.
One more thing you can try is to do a flash, wait about 30 minutes. If it still doesn't boot, pull the battery and reboot into recovery. Wipe data and cache and reboot again. It should boot. It'll still take a long time. Make sure you wait the 30 minutes before pulling the battery (it should have finished upgrading your system by then). Do note that first boot from now on will take forever no matter if it's a port or stock. Lollipop and higher take a long time to upgrade. I've only had 1 or 2 roms take around 5 minutes and that's because they were minimalist and without Google apps. The phone does get a little warm and uses a lot of battery, so I'd keep it plugged in.
Please report back if you got it to work and how. Like I said, I still use mine. I still visit this forum every day even though I've had an s5 and an s7 edge. I love this phone. I need to get mine replaced because I've worn it out: broken charger port so I have to make sure the cable is plugged in a certain way and I can't touch the phone while charging, side molding is broken off in places, some of my partitions can't be changed which means the memory is failing (not even Odin flashes correctly anymore let alone custom roms). But, it still keeps on ticking.
Click to expand...
Click to collapse
Come back to Android! We miss you!!!!
Yes I am backed up and also have a Titanium Backup of everything so I am pretty much covered... I have even backed up the backups to my PC!
You have much wisdom in what you are saying. I thought I would play around with some other ROM's and see what the potential is.
I hear good things about the Darklord Reborn by Midevil and JCorderno so thought I would investigate.
I am not opposed to using Odin, but I was at work, and no access to a computer so wanted to see if I could do the upgrade 'on the fly' since I am already rooted and with recovery.
Man, waiting 30 minutes for a phone to boot sounds like a anxiety attack waiting to happen! But still wanna give it a try.
As to your USB port. Have you thought of going wireless charging? I did and haven't looked back! You can get a wireless charging back and a case that will fit at...
for the charging back
https://smile.amazon.com/Samsung-Ga...=8-2&keywords=samsung+note+3+wireless+charger
for the case
https://smile.amazon.com/gp/product/B00F3KP156/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Clone Wars....
Just wanted to put out a big THANKS for this.. I broke my Note 3 after 2,433 days (long story) but had bought a stock spare on Ebay last year... Making the switch now, but your PH1 Flashable update is making it super easy!
To let everyone who needs to use this nowdays... you will need to Flash an older TWRP (I used 2.7.8) in order to allow the Modem partition to be overwritten. Then you can flash up to 3.x to load a Android 10 based rom.
Currently, I'm using TWRP 3.2.1-0 and I managed to get it to flash a ROM only once so far. I've already done some searching on what this error means which apparently just says that it fails checking for the proper make/model of the device so that it won't flash something its not suppose to. Except, I have a ROM for the device...
When I first flashed, I had no choice but to do a factory reset which is really a given anyway. But now... its another story. Trying to flash a an updated LineageOS ROM for instance to the latest nightly for instance, will always result in an Error 7. I don't really want to do a factory reset again if I can help it though, even though I do have two points of backup just in case... Not sure if anyone else is having issues about this or not, but figured I'd point it out for now.
TwinShadow said:
Currently, I'm using TWRP 3.2.1-0 and I managed to get it to flash a ROM only once so far. I've already done some searching on what this error means which apparently just says that it fails checking for the proper make/model of the device so that it won't flash something its not suppose to. Except, I have a ROM for the device...
When I first flashed, I had no choice but to do a factory reset which is really a given anyway. But now... its another story. Trying to flash a an updated LineageOS ROM for instance to the latest nightly for instance, will always result in an Error 7. I don't really want to do a factory reset again if I can help it though, even though I do have two points of backup just in case... Not sure if anyone else is having issues about this or not, but figured I'd point it out for now.
Click to expand...
Click to collapse
Downgrade to twrp 3.1.1-0 and try again...
No dice. Actually this was the second time I tried doing it like that. Doesn't matter which recovery I use be it 3.1.1, or 3.2.1. Both results in the same error regardless. Its like TWRP downgraded after it hit v3 because never once had I ever encountered a problem when I used it back on 2.8.7 (or 2.8.6, I can't recall back when Moto X (ghost) was my main device).
TwinShadow said:
No dice. Actually this was the second time I tried doing it like that. Doesn't matter which recovery I use be it 3.1.1, or 3.2.1. Both results in the same error regardless. Its like TWRP downgraded after it hit v3 because never once had I ever encountered a problem when I used it back on 2.8.7 (or 2.8.6, I can't recall back when Moto X (ghost) was my main device).
Click to expand...
Click to collapse
What is your exact model - what's written on the box and what is the model shown in Settings on your stock firmware (if you remember).
I have a sneaking suspicion that it may not be the exactly same device as ours - E5823, creating a conflict somewhere between Firmware/Recovery. Generally, it should get the device data from prop files but you never know I guess...
Here is what you can try: Install latest firmware for E5823 from XperiFirm in Flashtool and wipe everything. If you don't wipe old files are still going to stay! Also, make a backup of all your stuff so you don't lose it. There are guides how to do it here and what things to not wipe in any case.
The device model is indeed a E5823. This has been reported as such in the official firmware as well.
Currently I don't have any of the official firmware files, and I would like to avoid having to set up my phone again if I can help it; even with a nandroid of my current install handy... Its simply just a pain to get all that done.
The last 2 nightlys don't work properly!! I have clean installed, wiped everything and gone back to stock and tried and tried again and again!! 20180318 is the one that is true!! Try flashing that build!!
TwinShadow said:
The device model is indeed a E5823. This has been reported as such in the official firmware as well.
Currently I don't have any of the official firmware files, and I would like to avoid having to set up my phone again if I can help it; even with a nandroid of my current install handy... Its simply just a pain to get all that done.
Click to expand...
Click to collapse
The thing is some partitions get updated only in that way - like baseband for example. Ensuring everything is the latest version and on a clean slate will remove the chance of weird bugs that nobody knows about or can help you with.
Well, here's the irony. I reflashed your TWRP again, twice for that matter.. (I've had random cases where fastboot won't flash it the first time even though it said it did) and all of a sudden it started working. Android never ceases to amaze me when things want to work, and when things don't...
TwinShadow said:
Well, here's the irony. I reflashed your TWRP again, twice for that matter.. (I've had random cases where fastboot won't flash it the first time even though it said it did) and all of a sudden it started working. Android never ceases to amaze me when things want to work, and when things don't...
Click to expand...
Click to collapse
Lol. I have never had that :d and that is from years and years of use and multiple Sony devices...
My guess is a bad flash. That happens rly rarely but maybe u have a bad PC or cable that makes an unreliable connection...
Same thing happened on my old Moto X (2013) on my last system and the new tower I built. For some reason its something to do with fastboot for me, I really don't know. Either that, or its just Windows trying to fight me every which way it possibly can before something wants to work. Its a daily thing I have to deal with, no idea why. Must be my disdain for Windows perhaps..
TwinShadow said:
Same thing happened on my old Moto X (2013) on my last system and the new tower I built. For some reason its something to do with fastboot for me, I really don't know. Either that, or its just Windows trying to fight me every which way it possibly can before something wants to work. Its a daily thing I have to deal with, no idea why. Must be my disdain for Windows perhaps..
Click to expand...
Click to collapse
You might wanna ensure you have the latest fastboot drivers installed under 'Disable driver verification' mode.