I made a very cool tool that I need help testing...
I need 9 testers to try out my app...
What my app does is installs the xposed framework WITHOUT a recovery...
Why would I do this?
well NOT every device has a custom recovery & this tool will allow more devices to utilize xposed....
All I need to know is if it works or not for each set of device
right now it's in its beta stage & I hope to release it to google play if the test are successful...
so just comment your device sdk & cpu varient & I will send you a link to the app
I need to test the following:
sdk21 arm device
sdk21 arm64 device
sdk21 x86 device
sdk22 arm device
sdk22 arm64 device
sdk22 x86 device
sdk23 arm device
sdk23 arm64 device
sdk23 x86 device
here's the following things for beta testers to look for:
1. if the download & unzipping is successful or not
2. if the correct package has been downloaded or not
3. if the xposed framework installed correctly or not
4 if rebooting works & successfully enabled the framework
5. if the xposed framework has been ininstalled or not
6. any other errors such as misspelling/grammar...
ALSO BACKUP your device with a custom recovery or rooted app just in case anything happens before you try my app....
you HAVE been warn!
Related
Mod Edit: Thread closed by @Darth . Pay per click links are not permitted on XDA.
XPOSED FOR LOLLIPOP (CM 12.1 AND BASED ROMS)
XPOSED FOR LOLLIPOP (CM 12.1 AND BASED ROMS)
Step 1: Download Necessary Files
There are two core elements to Xposed—one is the Xposed Framework, which lays all of the groundwork, and the other is the Xposed Installer app, which allows you to download and manage modules. First up, grab a copy of the Installer from the following link:
Xposed Installer APK
In these early stages of Lollipop development, the Framework will have to be flashed in custom recovery. There are 3 different version of the Framework, and they each correspond to a different type of processor (ARM, ARM 64, x86). If you're not sure about the type of processor your Android device uses, check the spec sheet on a site like GSMArena, then download the corresponding ZIP file from one of these three links:
Xposed Framework ZIP
Step 2: Boot into Custom Recovery
When the files have finished downloading, the next step is to boot into custom recovery. To do that, start by powering your device completely off. This next part may vary, but for most devices, press and hold the volume down and power buttons simultaneously.
This will bring up Android's Bootloader menu. From here, use the volume down button to highlight "Recovery mode," then press the power button to select it.
Step 3: Install the Framework in Custom Recovery
Before you flash anything in custom recovery, it's always a good idea to make a full NANDroid backup. That's extra important in this case, since the Xposed Framework is in its early stages and may cause issues with some devices. Do not skip this step!
Then, to get started, go ahead and tap the "Install" button from TWRP's main menu. Next, navigate to your device's Download folder, then select the Xposed ZIP file that you downloaded in Step 1.
After that, just swipe the slider at the bottom of the screen to install the Framework, and when that's finished, tap "Reboot System."
Your device will take longer than normal to boot up here. This is because the Xposed Framework ZIP had to clear away some library files, which will need to be restored. Expect this process to take at least 10 minutes.
Step 4: Install the Xposed Installer App
When you get back up, it's time to install the actual Xposed Installer app. Tap the Download Complete notification for the "XposedInstaller_3.0-alpha3.apk" file, then press "Install" and "Open" on the next two menus.
At this point, you should be looking at that familiar Xposed interface we all know and love. Head to the "Download" section to begin browsing modules, but keep in mind that some may not work on Lollipop.
links to download
credits : to all those who helped me and xda members who made these files
XDA:DevDB Information
xposed module for cm 12.1 and other based roms, Xposed for all devices (see above for details)
Contributors
manhar2108
Source Code: REMOVED BY MODERATOR
Xposed Package Name:
Version Information
Status: Alpha
Current Beta Version: 4
Created 2015-07-15
Last Updated 2015-08-22
@manhar2108
why do we need another forum page the xposed devs page is here
http://forum.xda-developers.com/showthread.php?t=3034811
toolhas4degrees said:
@manhar2108
why do we need another forum page the xposed devs page is here
http://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
not for sdk 22 devices sir
this is for sdk 22 mtk 6592 and other mtk65** devices
Xposed for Lollipop is finally here.
Keep in mind that this is still an alpha version and for Lollipop on ARMv7+ devices just.
Kindly install it only if you want to take the threat of boot loops. Simply due to the fact that it’s working fine and steady for me does not imply it will work for everyone the very same method.
Downloads
xposed-arm-*. zip: Must be flashed with a custom recovery to set up the framework.
XposedInstaller_3.0-alpha *. apk: Have to be set up to handle set up modules
No, it’s not using product design yet. Yes, there are more crucial topics for now.
XposedBridgeApi-20150213. jar: The API for module developers, in case they want to make use of some new features. Could be altered slightly up until the steady release!
Understood concerns
It seems to boot loop on Samsung stock ROMs! Update: Samsung has altered many things in their version of ART. It will certainly take more time to adjust Xposed for it.
Xposed 3.0 alpha 4
It repairs bootloops and crashes on some ROMs, particularly on Sony devices. In the logs, there made use of to be “Too many open files” mistakes.
You just have to flash the ZIP again, the Xposed Installer app remains the same (and for that reason still shows version alpha2). If XposedBridge.jar has variation 64 after a reboot, the brand-new variation is active.
Feature
Framework v70
It turned out that some LG gadgets (at least G2 mini and G Pad 8.3) are utilizing encrypted precompiled (odex) apps. These have to be dealt with in a different way than apps which consist of simply the encrypted dex file. With framework version 70, Xposed supports both encrypted dex and odex files. Again, clearing the Dalvik cache might be necessary. If you do not have an LG device or don’t get FCs, you can skip this upgrade.
How to Install?
Download Apk (link below).
On your Android device, go to settings > security > allow unknown sources.
Find downloaded APK on your phone and install it.
All Done. Enjoy!
Mod Edit: Ad infested link removed
PRESS THANK YOU
XDA:DevDB Information
Xposed Installer 3.0 alpha 4 v70, Xposed for all devices (see above for details)
Contributors
GaneshXDA
Xposed Package Name:
Version Information
Status: Alpha
Created 2015-08-15
Last Updated 2015-08-15
The word of the day is chutzpah.
@rovo89
OP,
I'm a little disappointed. This is not your work, no credits given to the creator of xposed.... And your download link sent me into an ad/spam spiral that I had to reboot to end. (well, that was the easiest stop anyway)
Thread closed. And watch for incoming private message.
Darth
Forum Moderator
What is Kali Nethunter?
Kali Nethunter is an Android ROM overlay that includes a robust Mobile Penetration Testing Platform. It can be used to carry out attacks such as; Wireless 802.11 frame injection, one-click MANA Evil Access Point setups, HID keyboard attack, as well as BadUSB MITM attacks.
READ FULL POST BEFORE FLASHING!
Preparing ur device.
>Make sure u are rooted.
>Have twrp recovery installed. If not, no worries, just download and use FlashFire app from playstore or from here. CWM recovery is not supported but must still be installed. However Philz CWM Touch Recovery works.
>Note the kernel version ur downloading for ur device. Kernel version can be found in settings>about device. Downloads in 3rd post.
>[IMPORTANT] Take full backup with mtktools in case of any problem.
How to install Nethunter on ur Mediatek Device.
Since u prepared ur device, it time to install.
[IMPORTANT] No need to wipe system data or anything. This is an overlaying rom which is meant to flash over an existing android rom.
For TWRP users:
>Download the correct nethunter zip sorted by kernel version form 3rd post below and place it in the root of ur internal/external(sdcard) of ur device.
>boot into ur TWRP recovery, tap "install", select the zip file from sd card/internal storage (according where u saved it) and swipe to flash.
>once done just reboot normally.
Thats'it
Completing setup:
>Now that u have flashed and rebooted successfully, (don't open any app yet) open "Nethunter" app and grant su permissions.
>Go to "Kali Chroot Manager"and grant permission, than tap "INSTALL KALI CHROOT", tap "Download Latest, and select Full/Minimal chroot according to ur storage space.
>It will download. After download select "INSTALL KALI CHROOT" and it will install.
>Once done, reboot.
That's all. You have installed Kali Nethunter on ur mediatek device.
>For atheros chip based adapter users who are unable to get their wlan1 up or even shown in the terminal follow these instructions:
1- goto "nethunter terminal" app and tap on "Kali"
2- type "apt-get update"
3- type "apt-get install firmware-atheros"
4- check "airmon-ng" after re-plugging your adapter
Device : Lava Iris X8
Chipset : MT6592
Kernel : 3.10.72
Android Version : 5.1
SDK : 22
Download
This Xposed is only for Android 9 Pie. It is named EDXposed in which you can able to install as a magisk module. And you must install Riru Core before installing since it is based on this Riru core Module.
Your Samsung Galaxy M30s must be Rooted with Magisk, If not visit this link how to root it:
https://forum.xda-developers.com/ga...e-samsung-galaxy-m30s-sm-m307f-video-t4008641
Download EDXposed Installer ( EdXposedInstaller_v2.2.5-release.apk ):
https://github.com/solohsu/XposedInstaller/releases
Copy EdXposedInstaller_v2.2.5-release.apk to your phone on Download folder
Open Magisk manager and head over to the Download section through the menu
Search for Riru - Core and install it
Search Riru - EdXposed ( SanHook ) and install it
tap Reboot on Modules section
Install EdXposedInstaller_v2.2.5-release.apk
Done!
Watch this video how to do it:
does safetynet break after xposed
shamsud said:
does safetynet break after xposed
Click to expand...
Click to collapse
SafeNet does not break after installed Xposed: ctsProfile:True, basicIntegrity: True
Bootloop after installing Riru Core
Anyone facing bootloop after installing Riru Core?
Isn't EdXposed manager Recommended?
From https://android.stackexchange.com/q...d-on-android-10-without-triggering-safety-net
"Note that EdXposed installer may work but it is not recommended by developers and secondly does not prompt update alerts."
SM-J600G on android 9.
On the framework tab of Xposed installer, there is a red text that reads, "No matching zip were found, it seems like your device is currently not supported"
Is there an alternative that supports my device? Thanks
you can use virtual exposed or taichi
both of them are modded version of xposed that doesn't require root
https://virtualxposed.com/download
https://taichi.cool/
LOKSTED said:
SM-J600G on android 9.
On the framework tab of Xposed installer, there is a red text that reads, "No matching zip were found, it seems like your device is currently not supported"
Is there an alternative that supports my device? Thanks
Click to expand...
Click to collapse
U can grab edxposed from here just flesh it with magisk.
I have a rooted OnePlus 5 Android 10 and I'm facing this problem please help