Hello my friends
i have problem with my huawei honor 5x (L21). When he ran and logged into a Google account, the phone is switched off and grabbed bootloop. I went to recovery I did a full wipe and now i cant turn on my phone. What i can do now? I know that i can install rom by ADB or by download mode but i cant went to fastboot mode and i cant do anything.
Help me please
Mitlex said:
Hello my friends
i have problem with my huawei honor 5x (L21). When he ran and logged into a Google account, the phone is switched off and grabbed bootloop. I went to recovery I did a full wipe and now i cant turn on my phone. What i can do now? I know that i can install rom by ADB or by download mode but i cant went to fastboot mode and i cant do anything.
Help me please
Click to expand...
Click to collapse
sounds like you got a bad phone
easy way to get to bootloader is power + volume down - this will bring up fastboot mode where you can flash TWRP
then power + volume up till the phone shuts off and switch to power + volume down again should boot to TWRP
once TWRP loads you have a bunch of options - restore a backup - flash a rom - format the partitions ...lots of thing you can do their
clsA said:
sounds like you got a bad phone
easy way to get to bootloader is power + volume down - this will bring up fastboot mode where you can flash TWRP
then power + volume up till the phone shuts off and switch to power + volume down again should boot to TWRP
once TWRP loads you have a bunch of options - restore a backup - flash a rom - format the partitions ...lots of thing you can do their
Click to expand...
Click to collapse
But problem is there, i can't turn on this phone
sometimes when connecting to a charge ignites me the red LED (this is rare). usually even when I connect the phone to the charger, there is no reaction.
Mitlex said:
But problem is there, i can't turn on this phone
sometimes when connecting to a charge ignites me the red LED (this is rare). usually even when I connect the phone to the charger, there is no reaction.
Click to expand...
Click to collapse
yeah it's broken, get a refund or return it to Honor for repair
are you sure?this is the ultimate way to repair this phone? maybe i will have happiness and I will turn on this phone
Mitlex said:
are you sure?this is the ultimate way to repair this phone? maybe i will have happiness and I will turn on this phone
Click to expand...
Click to collapse
you can try charging it overnight and see if it boots up
Sent from my KIW-L24 using Tapatalk
okay I will do this and we will see...
if i havent warranty, i can throw away the phone??
Mitlex said:
okay I will do this and we will see...
if i havent warranty, i can throw away the phone??
Click to expand...
Click to collapse
theirs not much you can do for a phone that doesn't turn on
I think I can throw away this phone. Maybe this phone have uncharged battery and now by the lack of system files, the phone can not be charged? you ever thought about that?
if I change the motherboard, the phone will work, right?
okay! I called to the site Huawei, they told me that the phone has a manufacturer's warranty by the IMEI number. I am from the Polish and if my phone was bought in Europe, I can make a phone warranty.
For all who will have the same problem, IMEI number can be found on the SD card slot.
Related
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
vipinlahoti said:
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
Click to expand...
Click to collapse
first question, can you boot to bootloader/fastboot?
w1040 said:
first question, can you boot to bootloader/fastboot?
Click to expand...
Click to collapse
No, cant,
no bootloader just led on when attaching cable.
and PC detects as "unknown device attached"
vipinlahoti said:
No, cant,
no bootloader just led on when attaching cable.
and PC detects as "unknown device attached"
Click to expand...
Click to collapse
I think your only option is to restore it via RIFF JTAG... I don't know another way...
vipinlahoti said:
Hi,
I was just above to flash stock rom to receive JB update,
switched my desire then not able to boot into hboot, unable to boot into os.
led is turning on while attaching usb.
please help.
Click to expand...
Click to collapse
Is ur device booting in Qualcomm diagnostic mode.....?
If ur phn does then there is a possibility of flashing stock Rom
If u don't know..just Google it.....!
Sent from my ST25i using Tapatalk 2
@ OP, did you charge it?
Sent from my awesome fridge
yes, from last 2 hrs its on charging.
I donno what is RIFF JTAG and Qualcomm diagnostic mode
googling it....
If you haven't done it yet, pull out the battery, put it back in and try to get into bootloader or recovery. (the pulling out the battery part is important)
by the way, what exactly is happening when you try to boot? please describe step by step what is happening. And what do you mean by boot "into hboot"?
And how did you try to go back to stock? Did you even get into the stock rom. Didn't you just forgot to flash the boot.img when going back to stock?
DeXeS said:
If you haven't done it yet, pull out the battery, put it back in and try to get into bootloader or recovery. (the pulling out the battery part is important)
by the way, what exactly is happening when you try to boot? please describe step by step what is happening. And what do you mean by boot "into hboot"?
And how did you try to go back to stock? Did you even get into the stock rom. Didn't you just forgot to flash the boot.img when going back to stock?
Click to expand...
Click to collapse
to flash a rom I
1. Switched off my phone,
2. hold power + vol down (to boot into bootloader recovery), just blank screen no boot.
3. hold power button + vol up, again just blank screen no boot.
4. when us connected led lights up, and PC detects as "unknown device found".
not booting at all.
vipinlahoti said:
to flash a rom I
1. Switched off my phone,
2. hold power + vol down (to boot into bootloader recovery), just blank screen no boot.
3. hold power button + vol up, again just blank screen no boot.
4. when us connected led lights up, and PC detects as "unknown device found".
not booting at all.
Click to expand...
Click to collapse
but did you remove the battery and put it back in or not? If so and it still does not want to go into bootloader, it really is bricked.. Bring it to a service center for repair..
DeXeS said:
but did you remove the battery and put it back in or not? If so and it still does not want to go into bootloader, it really is bricked.. Bring it to a service center for repair..
Click to expand...
Click to collapse
Tried already but no luck,
Damn mine is rooted and bootloader not sure whether they repair or not
vipinlahoti said:
Tried already but no luck,
Damn mine is rooted and bootloader not sure whether they repair or not
Click to expand...
Click to collapse
If its hard bricked ,they wouldn't no.
..
navmad
mate maybe the screen of your phone has the problem...thats why it shows only blank...
mhb92 said:
mate maybe the screen of your phone has the problem...thats why it shows only blank...
Click to expand...
Click to collapse
That depends, if the device doesn't even shake, then it's not the screen.
Sent from my awesome fridge
Guys, I dont think having any screen problem, bcoz, no vibration during powering on, just a blank screen btw I have given to service center,
just finger crossed
Ok, I just want to know if my phone is hard bricked, or if I still have a chance...
I tried to install an update (121 to 170 for plk-l01) on my rooted phone, with local update. It didn't worked, twrp show errors everywhere, and after turning off know i can't access the recovery. when I press on vol+/- and power for 10-15 second, it vibrate but nothing else.
Is there anything I can do ? my phone isn't recognized by my computer, by the way...
Why you did that? You can't update rooted phone
Idiocrate said:
Ok, I just want to know if my phone is hard bricked, or if I still have a chance...
I tried to install an update (121 to 170 for plk-l01) on my rooted phone, with local update. It didn't worked, twrp show errors everywhere, and after turning off know i can't access the recovery. when I press on vol+/- and power for 10-15 second, it vibrate but nothing else.
Is there anything I can do ? my phone isn't recognized by my computer, by the way...
Click to expand...
Click to collapse
Try to boot into fastboot (phone turned off - connect with data usb to the computer - vol down + power on). Extract rom which is currently installed or higher (for your respective model) and flash from it:
fastboot.exe flash boot BOOT.img
fastboot.exe flash recovery RECOVERY.img
fastboot.exe flash cust CUST.img
fastboot.exe flash system SYSTEM.img
Reboot.
piskr said:
Try to boot into fastboot (phone turned off - connect with data usb to the computer - vol down + power on). Extract rom which is currently installed or higher (for your respective model) and flash from it:
fastboot.exe flash boot BOOT.img
fastboot.exe flash recovery RECOVERY.img
fastboot.exe flash cust CUST.img
fastboot.exe flash system SYSTEM.img
Reboot.
Click to expand...
Click to collapse
Thanks, but unfortunately, it just 'boot' as others reboots. it vibrates, doesn't get recognize and doesn't turn on...
If anyone have any clue on how to force recognizing the phone storage, it might really help ^^
That is what my phone is doing, I tried to upgrade to marshmallow though with no root!! I put the zip in the dload folder and went through the upgrade process everything went through the phone rebooted and now its dead. Blank screen and if you hold power after a few seconds it will vibrate but that is it. I presume its hard bricked? no matter what combo of buttons I press I cannot get it in to fastboot.
james194zt said:
That is what my phone is doing, I tried to upgrade to marshmallow though with no root!! I put the zip in the dload folder and went through the upgrade process everything went through the phone rebooted and now its dead. Blank screen and if you hold power after a few seconds it will vibrate but that is it. I presume its hard bricked? no matter what combo of buttons I press I cannot get it in to fastboot.
Click to expand...
Click to collapse
ok I'm looking for a solution for hours now... so I just lokked how works our phone and I think the trouble must be in the preloader, because I can't even make my phone being recognized by any computer and I can't access to recovery.
I found this :
http://www.droidgyan.com/soft-brick-vs-hard-bricked-vs-broken/
Which could help. I'll leave that topic on for some days (if it could help someone) and I'll open a new one to know if there is any easier solution ! thanks and good luck.
I sorted mine, it was only 2 days old so I got it replaced by the shop I bought it on. I would say it was something like a pre loader from what I saw. I have never bricked an Android phone and I must have had 15-20 of them since my first HTC Magic and before that Windows Mobile which again I messed with tons reloading with all sorts of ROM's!! These phones are wayyyy too sensitive to being messed with, I always remember though that you never mess with the boot loaders, but it looks like these updates do to get it bricked to that point.
Idiocrate said:
Thanks, but unfortunately, it just 'boot' as others reboots. it vibrates, doesn't get recognize and doesn't turn on...
If anyone have any clue on how to force recognizing the phone storage, it might really help ^^
Click to expand...
Click to collapse
Do you have adb debugging activated on the phone? Did you try to hold phone buttons long enough?
piskr said:
Do you have adb debugging activated on the phone? Did you try to hold phone buttons long enough?
Click to expand...
Click to collapse
Euuum..... maybe yes ? I used fastboot but I don't think it really matters now, there's nothing working on it. And I've sometimes hold the buttons for 30-40 second while praying lol
korenisko said:
Why you did that? You can't update rooted phone
Click to expand...
Click to collapse
local update
I just hard bricked my Honor 7 the same way. Is there really no solution? Other China-Phones are pretty much unbrickable, since you can always fix it via the preloader. No such luck here? Back to the shop and hope they actually replace it? While I admit it was stupid to just hastily start the OTA while having twrp and not stock recovery (no root, though), this is a terrible design flaw on Huaweis side.
Anyway... any hope or no chance?
i just hard bricked my honor 7 PLK-L01
it the same thing it is doing . not recognized by the computer
tried all the combination of buttons. but no hope
and it only vibrates when tried to turn on
Need urgent help please
@Idiocrate try to boot into bootloader mode just by pressing Vol DOWN button and simultaneously connecting it to a PC, don't press Power button, if it boots into it, then follow the method given by @piskr in third post.
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
kuhaku319 said:
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
Click to expand...
Click to collapse
If there is no other way you can always open the phone and charge the battery manually(if you have the equipment to do that). I had to do that to my phone yesterday(my battery was so low that it wouldn't boot).
BlAckXpeRia said:
If there is no other way you can always open the phone and charge the battery manually(if you have the equipment to do that). I had to do that to my phone yesterday(my battery was so low that it wouldn't boot).
Click to expand...
Click to collapse
how can i remove the case to get the battery out of the phone? its not removable right?
uh. no one?
kuhaku319 said:
how can i remove the case to get the battery out of the phone? its not removable right?
Click to expand...
Click to collapse
You have to use a hairdryer. There are tutorials on YouTube.
kuhaku319 said:
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
Click to expand...
Click to collapse
The phone should also be able to charge in recovery. Try that.
Btw. I recently flashed a Z2 via flashtool with an unplugged battery (usb power was enough), so you could also try flashing it now although it's empty.
Sent from Note 3, Xiaomi Redmi Note 3.
mr.loverlover said:
You have to use a hairdryer. There are tutorials on YouTube.
The phone should also be able to charge in recovery. Try that.
Btw. I recently flashed a Z2 via flashtool with an unplugged battery (usb power was enough), so you could also try flashing it now although it's empty.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
kuhaku319 said:
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
Click to expand...
Click to collapse
I would first try to flash just like it is now, without opening the back cover.
Opening the back panel is the last option I would consider, but only if everything else fails.
The thing with opening back cover is, that you will most likely damage you back panel, and you will have to order some new, fake raplecement + the phone won't be waterproof anymore.
And if you can get your phone into fastboot mode (and you've got unlocked bootloader) then just use "adb fastboot flash boot boot.img" command to flash some kernel with recovery.
Sent from Note 3, Xiaomi Redmi Note 3.
kuhaku319 said:
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
Click to expand...
Click to collapse
Have you tryied to plug it in and then press power and volume up continiusly until you fell three vibrations? i think this is for reseting the phone if you continue to press until another vibration it will shut down and maybe then it will charge. Also this thread had helped me before http://forum.xda-developers.com/showthread.php?t=1849170
NatNikos said:
Have you tryied to plug it in and then press power and volume up continiusly until you fell three vibrations? i think this is for reseting the phone if you continue to press until another vibration it will shut down and maybe then it will charge. Also this thread had helped me before http://forum.xda-developers.com/showthread.php?t=1849170
Click to expand...
Click to collapse
Thanks you for the reply
i tried the vol up + power only one time until it vibrates 3 times for the first time and its off, but when i plugged the charger its continues on bootloop cycles thus battery not filling up.
i guess im gonna try until another vibration and see what happen.
and thank you for the link, im gonna give it a try too later, im not home right now, cheers.
kuhaku319 said:
Thanks you for the reply
i tried the vol up + power only one time until it vibrates 3 times for the first time and its off, but when i plugged the charger its continues on bootloop cycles thus battery not filling up.
i guess im gonna try until another vibration and see what happen.
and thank you for the link, im gonna give it a try too later, im not home right now, cheers.
Click to expand...
Click to collapse
Maybe you should try it while plugged in also.
mr.loverlover said:
I would first try to flash just like it is now, without opening the back cover.
Opening the back panel is the last option I would consider, but only if everything else fails.
The thing with opening back cover is, that you will most likely damage you back panel, and you will have to order some new, fake raplecement + the phone won't be waterproof anymore.
And if you can get your phone into fastboot mode (and you've got unlocked bootloader) then just use "adb fastboot flash boot boot.img" command to flash some kernel with recovery.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
yeah i tried flashing it but the phone is totally dead, pc wont detect the phone because the phone is dead. that's the issue im facing now :silly:
NatNikos said:
Maybe you should try it while plugged in also.
Click to expand...
Click to collapse
tried, still bootlooped, when i hold power + vol up while plugged in, its powered on again and started bootlooping again
im just wondering. did u use flashtool to flash the ftf again?
Dilesh Perera said:
im just wondering. did u use flashtool to flash the ftf again?
Click to expand...
Click to collapse
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
kuhaku319 said:
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
Click to expand...
Click to collapse
ok try like this
1 put phone off ( u can press the little red button inside the left side flap till it vibrate 3 times )
2 disconnect the cable from Pc
3 open flashtool and select FLASHMODE select the ftf u going to flash
4 once the flashtool request to connect the phone connect the phone while keep on pressing the vol button
it should flash the ftf
kuhaku319 said:
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
Click to expand...
Click to collapse
It won't probably charge in fastboot/flashmode.
But it's very strange that the PC won't detect your phone when trying to enter flashmode.
Because, as I said earlier, I was able to get Z2 into flashmode without any power (battery taken out).
There should be some change in device manager when you connect the device.
Are you sure all the drivers are installed on your PC?
Dilesh Perera said:
ok try like this
1 put phone off ( u can press the little red button inside the left side flap till it vibrate 3 times )
2 disconnect the cable from Pc
3 open flashtool and select FLASHMODE select the ftf u going to flash
4 once the flashtool request to connect the phone connect the phone while keep on pressing the vol button
it should flash the ftf
Click to expand...
Click to collapse
mr.loverlover said:
It won't probably charge in fastboot/flashmode.
But it's very strange that the PC won't detect your phone when trying to enter flashmode.
Because, as I said earlier, I was able to get Z2 into flashmode without any power (battery taken out).
There should be some change in device manager when you connect the device.
Are you sure all the drivers are installed on your PC?
Click to expand...
Click to collapse
Solved
Apparently the driver is acting weird, but i uninstalled all z2 driver and reinstall them, all working and can be flashed
Thank you guys for helping me :fingers-crossed::highfive:
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Atalephinio said:
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Click to expand...
Click to collapse
You can reflash the rom with realme flash tool。（https://androidmtk.com/realme-flash-tool) ----Sorry for making a mistake earlier
Have you tried it?
yiyinglaohu said:
You can reflash the rom with MIFLASH。（https://c.mi.com/oc/miuidownload/detail?guide=1 ）or (http://www.miui.com/shuaji-393.html)
Click to expand...
Click to collapse
but the problem is that it is connecting and disconnecting every few seconds
Atalephinio said:
but the problem is that it is connecting and disconnecting every few seconds
Click to expand...
Click to collapse
Try to get into fastboot mode first . Your situation seems to be that the ADB driver is not fully installed
you can find it on google
yiyinglaohu said:
Try to get into fastboot mode first . Your situation seems to be that the ADB driver is not fully installed
Click to expand...
Click to collapse
how??? it is not responding when I am pressing on the buttons. It is hard bricked.
no fastboot no recovery. nothing - just black screen.
Atalephinio said:
hello,
I bought a CN version of gt, I unlocked the bootloader and changed the rom. Then I got again in twrp and pressed on reboot - then my phone bricked. It is not responding, and when I connect it to my pc, it connects and disconnects every 10 seconds while the cable still plugged in.
I don't know what to do, I spent 400$ on something that I can't use...
thanks.
Click to expand...
Click to collapse
try vol "down" +" power" button, if it'll go to recovery stable you can use adb commands
or
vol "up"+"down"+"power" (3 buttons in total) and when you see chinese letters just relesease them. if its succesful, you'll see bootloader menu
grown_man said:
try vol "down" +" power" button, if it'll go to recovery stable you can use adb commands
or
vol "up"+"down"+"power" (3 buttons in total) and when you see chinese letters just relesease them. if its succesful, you'll see bootloader menu
Click to expand...
Click to collapse
I wish it was my situation... I tried it nothing happens.
Atalephinio said:
I wish it was my situation... I tried it nothing happens.
Click to expand...
Click to collapse
then i suggest official repair services
Atalephinio: "but the problem is that it is connecting and disconnecting every few seconds""no fastboot no recovery. nothing - just black screen"
You probably only have EDL mode active. I think only MSM Download Tool will help you. However, but this is a paid service.
This is my opinion, but maybe someone more experienced should have a say.
Try to press three buttons (vol up- vol down- power) during 40 seconds aprox....
May only use 9008 mode.
I solved it. The only solution is to pay to someone who got msmtool.
This problem happens when you flash another rom through twrp on gt, it erases the recovery of the phone and then when the phone is trying to go to recovery it becomes bricked .
If you want to avoid it use the commands of adb and fastboot through the computer (not through the phone itself).
I paid 15$ to @hoangzk9 he solved the problem.
Big thanks.
Atalephinio said:
I solved it. The only solution is to pay to someone who got msmtool.
This problem happens when you flash another rom through twrp on gt, it erases the recovery of the phone and then when the phone is trying to go to recovery it becomes bricked .
If you want to avoid it use the commands of adb and fastboot through the computer (not through the phone itself).
I paid 15$ to @hoangzk9 he solved the problem.
Big thanks.
Click to expand...
Click to collapse
As I know that realme gt dont public the flash tool so we need contact to the services to get they help.
Same with you, I have some problem when I tried to flash twrp to realme phone. No luck and my phone became hard brick. But you can send an email to eu services of realme, they can help without any paid.
Good to know.
also i found many TWRP recovery for the same SoC (https://unofficialtwrp.com/download-twrp-3-3-1-mediatek-mt6765/ (Mediatek Helio P35 (MT6765))), will it work if I flash it with it?
thanks
horasmichael said:
also i found many TWRP recovery for the same SoC (https://unofficialtwrp.com/download-twrp-3-3-1-mediatek-mt6765/ (Mediatek Helio P35 (MT6765))), will it work if I flash it with it?
thanks
Click to expand...
Click to collapse
You will not no unless you try it
hi does yours work?
totalnewbielinux said:
hi does yours work?
Click to expand...
Click to collapse
do you have the same phone as him if so yes it will work as it is the same chipset t your phone mine is unofficial more like ported twrp
I am newbie but flashed samsung j7 before, yes I have oppo A15S, however the chipset I am not sure since the phone is come with the maxis/hotlink package that addon a few RM get free phone.
if possible I want official but asked chat GPT and google sadly no result+dead link.
totalnewbielinux said:
I am newbie but flashed samsung j7 before, yes I have oppo A15S, however the chipset I am not sure since the phone is come with the maxis/hotlink package that addon a few RM get free phone.
Click to expand...
Click to collapse
Mediatek MT6765 Helio P35 (12nm) is the chipset of your phone and also if you want an official version youcan compile your own twrp for your self
totalnewbielinux said:
if possible I want official but asked chat GPT and google sadly no result+dead link.
Click to expand...
Click to collapse
here there is an unofficial twrp for your chipset ---------> https://unofficialtwrp.com/download-twrp-3-3-1-mediatek-mt6765/
Hi my experience flash 1 phone before and that phone at least can boot into (normal mode) > now my oppo can only boot into recovery mode. Is there any way to enable developer mode?
totalnewbielinux said:
Hi my experience flash 1 phone before and that phone at least can boot into (normal mode) > now my oppo can only boot into recovery mode. Is there any way to enable developer mode?
Click to expand...
Click to collapse
what do you mean that your phone is stuck at recovery mode? if not you can enable the developers option this is the steps
1.) Go to setting
2.) Go to About phone
3.) tap the build number 7 times
4.) now quit the setting then open it again
5.) scroll down then choose the developers option
thats how you open developers option
basically when I reboot turn off> it will "never" boot into normal mode. My phone is so broken that pressing power button only still boot into recovery mode, wipe data and reboot still into recovery mode.
totalnewbielinux said:
basically when I reboot turn off> it will "never" boot into normal mode. My phone is so broken that pressing power button only still boot into recovery mode, wipe data and reboot still into recovery mode.
Click to expand...
Click to collapse
can you give a picture of your phone or video while doing it so i know what s the problem?
Sorry for late reply basically my volume key stuck and a week later it can use so I JUST IGNORE NOW WORSE. just now I power off my phone and now I cannot power on my phone (just now charging no problem) now charging does not show anything and my phone bricked...
totalnewbielinux said:
Sorry for late reply basically my volume key stuck and a week later it can use so I JUST IGNORE NOW WORSE. just now I power off my phone and now I cannot power on my phone (just now charging no problem) now charging does not show anything and my phone bricked...
Click to expand...
Click to collapse
your phone seems to be new which means that your volume keys are still new and good so thats not our problem here your phone didin't boot right? did you do something to your system phone like flashing or something? because if you do there is a big chance that you screw up something in your phone resulting it to be like that. now your phone can still be charge right there might be still a hope we just need to reflash your whole firmware ( if the problem is really a firmware) you said before you cant boot right then there must be a problem in the booting process, i tested this on my phone before i clean wipe my whole phone and that include system partition so when i tried to boot my phone it wont and when i charge it no logo would appear just like yours so im guessing that you phone partition is gone and like you said to its bricked now. if thats the case we need to flash the whole firmware
Anonymous V said:
your phone seems to be new which means that your volume keys are still new and good so thats not our problem here your phone didin't boot right? did you do something to your system phone like flashing or something? because if you do there is a big chance that you screw up something in your phone resulting it to be like that. now your phone can still be charge right there might be still a hope we just need to reflash your whole firmware ( if the problem is really a firmware) you said before you cant boot right then there must be a problem in the booting process, i tested this on my phone before i clean wipe my whole phone and that include system partition so when i tried to boot my phone it wont and when i charge it no logo would appear just like yours so im guessing that you phone partition is gone and like you said to its bricked now. if thats the case we need to flash the whole firmware
Click to expand...
Click to collapse
Thanks for reply>to avoid confusion no I did not do anything/flashing/even enable usb debugging to my OPPO A15S. I am total newbie that I flash Samsung J7 once only. The Oppo A15S yes it is 1-2 years only, volume key clicking works fine but after system update via setting>Official Oppo coloros things. My phone kinda messed up volume key not working<google results say because a lot of phone cannot boot up because of volume key. So should I pry open my phone to see the volume key? Or just wait until 1 day scheduled power up happens?
Logs:
Wednesday 5am my phone auto boot up in recovery mode.I press restart and the screen black nothing happens.
Thursday 5am no boot up
Friday no boot up too.
So I assume it is my phone power is low and somehow my auto scheduled power on force my phone to boot up? and that time system auto update causes my phone die in midway?
totalnewbielinux said:
So I assume it is my phone power is low and somehow my auto scheduled power on force my phone to boot up? and that time system auto update causes my phone die in midway?
Click to expand...
Click to collapse
hmm i see you didnt do anything in your phone but you did say that you updated it right? while updating you phone did something happen? like rebooting? if so there might be a chance that it became corrupted because of ,that while in the case of your power button what kind of problem does it have? does it work correctly? or you cant click it like its stuck or something? or maybe the button is working correctly and your phone just doesnt boot up? if the button is really problem like google stated ----->
Why is my OPPO always in Recovery mode?
One of the most common causes is that [B]one of the buttons used to access android system recovery is defective or malfunctioning[/B]. Now, you should first check if the physical buttons are responding properly, especially the volume buttons, before trying to get rid of the Android Recovery Mode.
you should probably check you physical button because that might be a problem and i just remembered i have the same problem in my sisters phone vivo y53 its always stuck in recovery mode and we are confused why did it happen so we bring it to our technician friend and let him fix it and he really fix it he he told me that if something happen like this again check all the buttons correctly. Now there is really problem in you button and you cant just pry in you phone you might break something you should let the professional do it like technician after you fix your button try to boot up again and if its still black screen or recovery then the problem is in the phone system and you can comeback here so we can help you fix it.