Just got the update from Wind in Canada. Still Android 5.1, don't know what's new.
Plzzz check any side effects on the camera quality.
most likely just the April security update
US Generic has update too.
I tried to flash the new firmware using flashtool. It gave errors and now the phone has been softbricked. I don't know what happened. Flashtool doesn't recognises the phone now and asks to install drivers for the device. I installed the drivers from sony's website but the issue persists.
Please help.
arjun.arora said:
I tried to flash the new firmware using flashtool. It gave errors and now the phone has been softbricked. I don't know what happened. Flashtool doesn't recognises the phone now and asks to install drivers for the device. I installed the drivers from sony's website but the issue persists.
Please help.
Click to expand...
Click to collapse
Try Sony Phone Companion.
mingkee said:
Try Sony Phone Companion.
Click to expand...
Click to collapse
Nothing works buddy. PC companion doesn't recognize the phone. It's not going in fastboot or flashmode, the red light turns on whenever I attach it to the laptop, nothing else happens.
arjun.arora said:
Nothing works buddy. PC companion doesn't recognize the phone. It's not going in fastboot or flashmode, the red light turns on whenever I attach it to the laptop, nothing else happens.
Click to expand...
Click to collapse
You need to press the "Vol -" on your phone before plugging it on the USB. Make sure you DIDN'T update the Flashtool to last version. You have to use the version 0.9.19.8 and before you flash, select the buffer size to 128K. I bricked my phone once and I could recover it.
I hope this revives your phone. Good luck!
BugKiller89 said:
You need to press the "Vol -" on your phone before plugging it on the USB. Make sure you DIDN'T update the Flashtool to last version. You have to use the version 0.9.19.8 and before you flash, select the buffer size to 128K. I bricked my phone once and I could recover it.
I hope this revives your phone. Good luck!
Click to expand...
Click to collapse
As I mentioned earlier buddy, it doesn't go into flash mode or fast mode. Flashtool doesn't recognize the device.
Mine is rooted and update via OTA fail. Tried PC companion and updated successfully. As expected, root lost. Android security update is for Feb only. Cant tell any difference from the previous firmware.. softkey doesnt change either, annoying flicker is still there before playing a video if u had adjusted the colour manually .. Not sure if its a worthy "update".... going to try root again via kingroot.
scpion said:
Mine is rooted and update via OTA fail. Tried PC companion and updated successfully. As expected, root lost. Android security update is for Feb only. Cant tell any difference from the previous firmware.. softkey doesnt change either, annoying flicker is still there before playing a video if u had adjusted the colour manually .. Not sure if its a worthy "update".... going to try root again via kingroot.
Click to expand...
Click to collapse
I can tell battery is improved.
Easy 4 hours screen on time.
mingkee said:
I can tell battery is improved.
Easy 4 hours screen on time.
Click to expand...
Click to collapse
the battery improvement i got it when shifting from 5.0 to 5.1 (29.1.b.0.87)
i can easily with full battery reach > 7 hours screen on time till 20% of battery
hope to get more improvemnt yet
mingkee said:
I can tell battery is improved.
Easy 4 hours screen on time.
Click to expand...
Click to collapse
Erm.. 4hrs is quite terrible.. What have u been with your phone... :/
scpion said:
Erm.. 4hrs is quite terrible.. What have u been with your phone... :/
Click to expand...
Click to collapse
What do you think?
Note: I played about an hour of Candy Crush Saga.
mingkee said:
What do you think?
Note: I played about an hour of Candy Crush Saga.
Click to expand...
Click to collapse
I would like to report that king root still works for this device after the update. So does switching over to supersu.
scpion said:
I would like to report that king root still works for this device after the update. So does switching over to supersu.
Click to expand...
Click to collapse
It didn't work out at first and the phone had problems, but I run Sony Companion to update once more and it went through perfectly. After that, everything went smoothly.
mingkee said:
What do you think?
Note: I played about an hour of Candy Crush Saga.
Click to expand...
Click to collapse
u should calibrate ur battery. it seems that battery doesnt replaced at all(%100) i get 5 hours till %40
arjun.arora said:
As I mentioned earlier buddy, it doesn't go into flash mode or fast mode. Flashtool doesn't recognize the device.
Click to expand...
Click to collapse
I'm in the same boat too. Now my C5 Ultra only has a red light when I plug it into the USB and nothing can bring it back to life.
Any help much appreciated please, please.....:crying:
flightsimmer01 said:
I'm in the same boat too, made the mistake of not reading this first. Flashed it using 09.20.0 and now my C5 Ultra only has a red light when I plug it into the USB and nothing can bring it back to life.
Any help much appreciated please, please.....:crying:
Click to expand...
Click to collapse
I had to take it to sony service center, they didn't asked me many questions. I told them I was trying to update it using pc companion and it just went dead. They fixed the phone in 5 days and returned it. The funny thing is that I had unlocked its bootloader a long time ago so it should've been out of warranty, also, the IMEI numbers have changed and the drm keys and functions have been restored. Can't believe my luck...
Related
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
soldiers33 said:
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
Click to expand...
Click to collapse
Repair using SEUS.
it wont work. just says I already have latest software
Even if you have "the lastest software installed" you can reinstall it.
soldiers33 said:
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
Click to expand...
Click to collapse
The new flash tool 0.2.5, will flash both 1.6 and 2.1. It works a little different, you will need to read through 1st.
ive tried the new flash tool and the old. neither work. The old one flashes but same problem but new one wont even let me select the firmware to flash so i cant even try it out properly. and sues just lets me exit it doesnt let me repair like usual
soldiers33 said:
ive tried the new flash tool and the old. neither work. The old one flashes but same problem but new one wont even let me select the firmware to flash so i cant even try it out properly. and sues just lets me exit it doesnt let me repair like usual
Click to expand...
Click to collapse
1. Try PC companion.
2. Read this guide.
You need to create the ftf file from the sin files, under advanced see bundle creation.
Read the how to.
pc companion wont work as I need to have usb storage but my phone wont even turn on. I have created the ftf files and now flashing, hopefuly it works.
still the same . could it be that the cable got disconnected half way through the process? sorry i forgot to mention this. My brother pulled it out. am i doomed?
soldiers33 said:
still the same . could it be that the cable got disconnected half way through the process? sorry i forgot to mention this. My brother pulled it out. am i doomed?
Click to expand...
Click to collapse
No you are not doomed. Calm down
1. Repair using SEUS (even if it says you have the latest software, reinstall it)
2. If that does not work, try PC companion.
3. If that does not work then use the flash tool. You can use the old version if the new one is not working out for you.
Before you do all of the above, take out the battery and wait 10 seconds. Then, reinstall the battery and try the SEUS. Good luck!
the thing is sues wont letme repair it just says exit. Normally you can repair but now it just says exit.
soldiers33 said:
the thing is sues wont letme repair it just says exit. Normally you can repair but now it just says exit.
Click to expand...
Click to collapse
OK. Then try the older version of the flash tool. You can find it here.
Does it also say install? If so, press that button. If that doesn't work install PC Companion and try that method.
thank you very much everyone for the help. Its finally working. I used the flash unbrick and its fixed im so happy i thought that my money went down the drain.
soldiers33 said:
thank you very much everyone for the help. Its finally working. I used the flash unbrick and its fixed im so happy i thought that my money went down the drain.
Click to expand...
Click to collapse
Glad it's sorted out. Take deep breaths now and enjoy your phone!
My Xperia X10 is currently not working (see previous thread http://forum.xda-developers.com/showthread.php?t=993785) and I still haven't been able to fix it.
I'm trying to use Flashtool to flash the generic X10 Firmware to my phone although
it's taking up to 4+ hours and then my phone battery dies and the flash is unsuccessful.
Why is Flashtool taking so long to flash a firmware to my X10? I've tried a few different computers and still the same problem.
Please Help. Thank you.
Have you checked, >development >USB debugging in the applications menu?
gogogu said:
Have you checked, >development >USB debugging in the applications menu?
Click to expand...
Click to collapse
I cannot access my phone as of now, it's pretty much a brick. Holding the on button brings only a vibrate and thats it.
what about flashing a rom that you know worked on your phone, making sure you flash the right Baseband for that particular rom first.
EDIT: Sorry just read through you posts and you have probably tried this if you have flashed a rom to it!
gogogu said:
what about flashing a rom that you know worked on your phone, making sure you flash the right Baseband for that particular rom first.
EDIT: Sorry just read through you posts and you have probably tried this if you have flashed a rom to it!
Click to expand...
Click to collapse
Is it possible to turn USB Debugging on without accessing the device??
not assuming you're silly. but you are making sure you have your finger firmly on the back button when you plug in the phone when flashing yeah? the simplest are often the ones that get you.
gogogu said:
not assuming you're silly. but you are making sure you have your finger firmly on the back button when you plug in the phone when flashing yeah? the simplest are often the ones that get you.
Click to expand...
Click to collapse
Yes, It's not that lol. So where do I go from here, my phones pretty much bricked then?
it wont charge via usb or regular charger?
aval1392 said:
it wont charge via usb or regular charger?
Click to expand...
Click to collapse
Read previous thread in original post.
The phone has crashed for some reason whilst using the FreeX10 Beta4 Rom and I cannot access the phone. It charges fine although I cannot turn on/access my phone.
not sure why the flash is taking so long. attempt to flash a different firmware possibly? Also do you have the latest flashtool?
Impossible to brick so you're not out of luck yet. Try flashing with latest flashtool 2.9.1
I'll attempt now with the Flashtool 2.9.1 beta. It's a shame that as soon as they unlock the bootloader my X10 decides to stop working.
EDIT:
'turn on Unknown Sources and Debugging' - It's impossible to access my phone to turn on USB debugging and unknown sources. What do I do now?
bump, anyone??
Attempt repairing your phone via Sony Ericsson Update Service. If that fails put a compatible basebrand and firmware on your phone. Make sure user data is wiped
aval1392 said:
Attempt repairing your phone via Sony Ericsson Update Service. If that fails put a compatible basebrand and firmware on your phone. Make sure user data is wiped
Click to expand...
Click to collapse
Sony Ericsson Update Service does not recognise the product.
Not that I haven't attempted this but I put a compatible baseband and firmware and it took 7 hours in which it only flashed 4 items and then the rest flashed instantly which the phone displays blinking red light.
It's not working. Whats wrong???
Bump for resolution.
foxhound494 said:
Bump for resolution.
Click to expand...
Click to collapse
mine does exactly same as yours, every time is prompt Error Flashing, aborted.....alway stop at kernel.sin or boot.sin
I cannot access my phone as of now, it's pretty much a brick. Holding the on button brings only a vibrate and thats it.
Click to expand...
Click to collapse
Try to use SEUS to repair phone if you can't boot your phone. Do not use PC Companion cause' it will try to detect your phone everytime you use it but your phone can't boot so PC Companion now useless. If you can't repair your phone, you have to bring it to SE service.
Sony Ericsson Update Service does not recognise the product.
Click to expand...
Click to collapse
It will not detect your phone dude. You must select your phone from the list supported. It will tell you to plug your phone in while holding BACK key and after searching for update, you will have a notice about update or repairing.
hello !! i got this z ultra a month ago... rooted it with the help of Vroot... and unfortunately.. today, i was using an app called android tweaker.. used some settings there like GPU rendering, Multitasking & Touch sensitivity enhancer.. it asked for a hard reboot... there you go.. struck .. shows up sony logo and reboots... thats all.... i have flash tools, i have Backup TA .. i dont have cmw on the phone nor the titanium backup... kindly help me .... i tried to repair with pc companion.. but it fails to dect the phone as its not completely booting up... tried to get it detected in fastboot ... but it says something like S1 fastboot drivers not found ... !! requesting expwert advice.. i was with the latest version of update .. something like 510 or 526... i've not unlocked bootloader at all... :good::good:
GauthamD said:
hello !! i got this z ultra a month ago... rooted it with the help of Vroot... and unfortunately.. today, i was using an app called android tweaker.. used some settings there like GPU rendering, Multitasking & Touch sensitivity enhancer.. it asked for a hard reboot... there you go.. struck .. shows up sony logo and reboots... thats all.... i have flash tools, i have Backup TA .. i dont have cmw on the phone nor the titanium backup... kindly help me .... i tried to repair with pc companion.. but it fails to dect the phone as its not completely booting up... tried to get it detected in fastboot ... but it says something like S1 fastboot drivers not found ... !! requesting expwert advice.. i was with the latest version of update .. something like 510 or 526... i've not unlocked bootloader at all... :good::good:
Click to expand...
Click to collapse
You need to install the ADB sony drivers... 's1fastboot' requires these. Do a search on google and they will pop up.
actually here are the drivers:
HSPA+ http://developer.sonymobile.com/downloads/drivers/xperia-z-ultra-driver/
LTE http://developer.sonymobile.com/downloads/drivers/xperia-z-ultra-c6833-c6806-c6843-driver/
If PC companion still doesnt work then you will need to use 'flashtool' and can then flash an FTF firmware file.
flashtool: http://dfiles.eu/files/lbbuacfhe
.532 firmware: https://docs.google.com/file/d/0B_rMaA9i_MUSRi1zWlpCOXV4RUE/edit?usp=sharing
I was thinking of making a video on how to do all of these steps, however I have to fly out in a couple of hours so wont have time until next week...
thank you .... !! i will try all these ... i have a slow internet..
hamdogg said:
You need to install the ADB sony drivers... 's1fastboot' requires these. Do a search on google and they will pop up.
thanks thanks .... ill try these and let you know .. soon... my internet will lwt mw do these in a week hopefully ... thank you again... :good:
Click to expand...
Click to collapse
Next time, don't try to tweak a stock kernel. If you're not sure how stuff works, don't mess with it. If you're not sure about something then ask us before you do stuff like this. There's a reason why we're all here.
Sent from my Z Ultra, using XDA Premium 4
the driver package that i downloaded doesnt really has a .exe or .bat file... how do i get it installed ... really confused ...
GauthamD said:
the driver package that i downloaded doesnt really has a .exe or .bat file... how do i get it installed ... really confused ...
Click to expand...
Click to collapse
I emailed you this, but may have gone to spam..
they are just driver ini files and system config settings.
1) right click on my computer
1a) properties
2) device profile
3) look for devices without drivers
4) update driver
5) advanced/
6) have disk
7) use the unzipped folder as the location
8) yes continue with unsigned driver version
done
i may have missed a step as I only have access to my Ultra at the moment, but thats what you need to do
Been there 3 times now getting used to my xzu being bricked lol, just ploug your phone into your computer using the usb lead then click on sony pc companion click on the start on support click update phone / tablet then click REPAIR MY PHONE after that follow the instructions that will bring her back from the dead
Sonic1981 said:
Been there 3 times now getting used to my xzu being bricked lol, just ploug your phone into your computer using the usb lead then click on sony pc companion click on the start on support click update phone / tablet then click REPAIR MY PHONE after that follow the instructions that will bring her back from the dead
Click to expand...
Click to collapse
Sonic 1981: Professional Bricker since 2013.
Order some business cards ASAP
LordManhattan said:
Sonic 1981: Professional Bricker since 2013.
Order some business cards ASAP
Click to expand...
Click to collapse
When I hold down the volume down and plug. The green led blinks and goes off.. but fast boot is working fine. . I've ftf file. Which cannot be flashed in fast boot. Fast boot asks for .img or .sin files. Doesn't accept ftf.* . . My phone is into boot loop. . Can't use Sony pc companion as it restarts b4 the pc companion can install the drivers. . I need to use fast boot exclusively. ..
GauthamD said:
When I hold down the volume down and plug. The green led blinks and goes off.. but fast boot is working fine. . I've ftf file. Which cannot be flashed in fast boot. Fast boot asks for .img or .sin files. Doesn't accept ftf.* . . My phone is into boot loop. . Can't use Sony pc companion as it restarts b4 the pc companion can install the drivers. . I need to use fast boot exclusively. ..
Click to expand...
Click to collapse
The correct for fastboot is blue led always on
When using S1 mode the green led blinks then no led if im right
And use flashtool instead, much easier
Sonic1981 said:
Been there 3 times now getting used to my xzu being bricked lol, just ploug your phone into your computer using the usb lead then click on sony pc companion click on the start on support click update phone / tablet then click REPAIR MY PHONE after that follow the instructions that will bring her back from the dead
Click to expand...
Click to collapse
I did this but PC companion says : the device has software modified than it cant be repear.
What else cn i do?
natispain said:
I did this but PC companion says : the device has software modified than it cant be repear.
What else cn i do?
Click to expand...
Click to collapse
Flash with flashtool i suppose.
herogjan said:
Flash with flashtool i suppose.
Click to expand...
Click to collapse
First, it didnt work. I installed and uninstalled many times flashtool and different versiont of flashtool and finally I dont know how but it worked.
Hi,
I have a UK Sony Xperia Tab Z, WiFi only 32G, it was running 4.1.2 stock with root. After a very long wait of sitting on the fence because of the loss of Tab UI (now sorted with phab7), I finally plucked up the courage to update my Tab Z to the latest Jelly Bean 4.3, using my MAC I ran Sony Bridge, it detected my device and offered to do the update. The whole update downloaded ok but it failed to install with an error about the update engine.
My worse nightmare ...... I'm not that familiar with advanced Android OS issues so please forgive my ignorance. first I tried the update again - multiple times in fact using different USB ports but always the same error. So then I tried running the Sony Update Service under Windows, It found the device and downloaded the update again but again it failed to install the up date (I tried both install options - SW Update only / Data Reset and Update) - I followed the on screen instructions correctly but always the same problem, again I tried different ports.
Starting to panic now ....
Looking through these forums and others for help ....
I've tried holding down the PWR & VOL_UP button for 10 seconds, and letting go, I tried it and then released the PWR button after 10 secs but keep VOL_UP held down, but no matter what i do it wont start up. Some times the SONY logo appears then fades to black after a few seconds....
I really don't understand what could have gone wrong, the device was working fine and the battery was 100% charged. I've tried the button combos with it in and out of the dock and connected by USB but still same result.
I cant believe that something that should work WITHOUT-FAIL does not work, I've always been an IOS/MAC man and the Sony Tab Z has been my one and only Android Device, I like the device for its design and lightness but this sort of catastrophic failure has been the thing thats aways put me off Android, it just should not happen - sure IOS sometimes can get corrupted but you can just about always get out of the problem in DSM mode, is there such a mode with Android & Xperia TAB Z. Can anybody help ?
Update: If I now put the Tab in the Charging Cradle, it seems to be stuck in a loop, first the charge led is orange, then after a few seconds it turns red and the backlight switches on, the SONY logo appears for a few seconds then it looks like it resets, the backlight turns off and after a few seconds it repeats the sequence ... continuously ?
Thanks in Advance
Jay
Try to run sony update service again after some time
nick2crete said:
Download sus ,install it and follow the procedure ,good luck!
Click to expand...
Click to collapse
Thanks for the tim but i already tried SUS as i explained -:
So then I tried running the Sony Update Service under Windows, It found the device and downloaded the update again but again it failed to install the up date (I tried both install options - SW Update only / Data Reset and Update) - I followed the on screen instructions correctly but always the same problem, again I tried different
Click to expand...
Click to collapse
ports.
Cheers
Jay
jay.monkey said:
Thanks for the tim but i already tried SUS as i explained -:
ports.
Cheers
Jay
Click to expand...
Click to collapse
Sorry i saw it after ,ive edited ,leave it for some time and try again ,its very hard to brick xperia devices ,try again
nick2crete said:
Sorry i saw it after ,ive edited ,leave it for some time and try again ,its very hard to brick xperia devices ,try again
Click to expand...
Click to collapse
Thanks for your advice.
I tried SUS again and this time it started to install but the progress bar stopped around 30% and i got the same message, so i tried again and it bombed out after around the same amount of time so i swapped the USB cable for the one it came with (normaly used to connect the changing cradle) and it worked......Phew was really starting to think the thing was bricked. I guess this proves that all USB cables are not equal ?, strange though as i've used the same cable for a long time now with loads of other devices (camera, kindle, SD reader, label printer ..etc) and have not had any issues but it worked soon as I changed the cable .... maybe Sony cable is better screened as it is a bit thicker than the other.
Everyday a School day ....
So now I have got 4.3 stock running what is best method to get root back ?
Cheers
Jay
jay.monkey said:
Thanks for your advice.
I tried SUS again and this time it started to install but the progress bar stopped around 30% and i got the same message, so i tried again and it bombed out after around the same amount of time so i swapped the USB cable for the one it came with (normaly used to connect the changing cradle) and it worked......Phew was really starting to think the thing was bricked. I guess this proves that all USB cables are not equal ?, strange though as i've used the same cable for a long time now with loads of other devices (camera, kindle, SD reader, label printer ..etc) and have not had any issues but it worked soon as I changed the cable .... maybe Sony cable is better screened as it is a bit thicker than the other.
Everyday a School day ....
So now I have got 4.3 stock running what is best method to get root back ?
Cheers
Jay
Click to expand...
Click to collapse
Glad to read that
check this out
http://forum.xda-developers.com/showthread.php?t=2588442
find the files for your device and follow the procedure if the guide confuses you look this from XZ but dont mess the files
http://forum.xda-developers.com/xperia-z/development?nocache=1&z=6559581532359532
Thank you for the link but I dont understand why I need to reflash?
Is there not a direct way to gain root?
To get root on 4.2.2 I just had to run a script and reboot
Ive read throgh those instructions and it looks like I have to install unlocked bootloader and then flash modified firmware
I thought that if boot loader is unlocked some of the Sony features no longer work?
Is there no way to gain root on stock 4.3 with locked BL?
Cheers Jay
Sent from my SGP312 using XDA Premium HD app
I am like u. I am on 4.3 and want root I have the ftf files of 4.2.2 on my pc what I am affraid of is: if I reflashed the 4.2.2 again I will lose my apps and data or everything will remain unchanged?
Sent from my SGP311 using xda app-developers app
Miro24h said:
I am like u. I am on 4.3 and want root I have the ftf files of 4.2.2 on my pc what I am affraid of is: if I reflashed the 4.2.2 again I will lose my apps and data or everything will remain unchanged?
Sent from my SGP311 using xda app-developers app
Click to expand...
Click to collapse
I recommend this thread to you guys it worked for me (sgp311)...
Make sure to back up all your apps and data before doing this...
http://forum.xda-developers.com/showthread.php?t=2588442
4.3 Root ?
donedos said:
I recommend this thread to you guys it worked for me (sgp311)...
Make sure to back up all your apps and data before doing this...
http://forum.xda-developers.com/showthread.php?t=2588442
Click to expand...
Click to collapse
So No way of applying Root to locked 4.3 then ?
Jay
jay.monkey said:
So No way of applying Root to locked 4.3 then ?
Jay
Click to expand...
Click to collapse
No root exploit for 4.3 yet but the method mentioned previously worked fine for me on a locked BL.
Sent from my C6603 using xda app-developers app
hello
i have issues in my phone ( Xperia C5 Ultra Duel )
i downloaded marshmallow to my phone and after i downloaded it i get many issues es
first problems in sim network many times i disconnect from network
second cant charge my phone and now phone is turn off i try use many charges & cables and not charging only red lamp turn in .
finally i try many times to log in flashmode or Fastboot but failed ( using flash tool prog. )
please help me and need solve to this problem
Thanks
AdrianBej said:
Alright mate, have you tried getting into recovery by pressing the Volume Down (-) button while plugging the phone into your computer? The little LED light in the upper left corner should light up indicating it is on flashmode. If not, I suspect it might be a hardbrick.
What programme did you use to get Marshmallow, Emma or Flashtool? If you used Flashtool you can not use the lastest version of it because it bricks the device. Every flashing must be done with 0.19.xx versions.
Click to expand...
Click to collapse
thx for replay
first yes i did that already , and nothing happen just little LED light be RED only
second i get marshmallow from ( update software ) in phone
Setting >> About Phone >> Update Software and the size of this update is 900M.b
i did not use any program to get marshmallow only by phone
Magicor said:
thx for replay
first yes i did that already , and nothing happen just little LED light be RED only
second i get marshmallow from ( update software ) in phone
Setting >> About Phone >> Update Software and the size of this update is 900M.b
i did not use any program to get marshmallow only by phone
Click to expand...
Click to collapse
Have u tried factory reset? Do factory reset and check if its still having issues then using flashtool flash MM firmware..it might help..
sauaditi said:
Have u tried factory reset? Do factory reset and check if its still having issues then using flashtool flash MM firmware..it might help..
Click to expand...
Click to collapse
i do it many time and stiill have problems
AdrianBej said:
Hmm could be a hardbrick, but I can not see how an OTA update could hardbrick a phone unless it is modified
Is the bootloader unlocked? Do you have root? Is Xperia Theft Protection activated?
Plug the phone into a wall and let it charge overnight, then do the thing I told you to do before and come back.
Click to expand...
Click to collapse
i did nt do root for my phone and i did not do any thing with bootloader