Hello please help i have a big problem on my NEO N003 1/4g T13
I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room
i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes
after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)
but the phone still freezing and restarting ...black screen ......
after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing
in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error (look at the picture)
please help me i use the phone only 1 month please help me
this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Please Help Help !!!!!
Help me For God Sake I am going Crazy !!!!!
benladen said:
Hello please help i have a big problem on my NEO N003 1/4g T13
I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room
i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes
after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)
but the phone still freezing and restarting ...black screen ......
after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing
in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error (look at the picture)
please help me i use the phone only 1 month please help me
this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Click to expand...
Click to collapse
benladen said:
Help me For God Sake I am going Crazy !!!!!
Click to expand...
Click to collapse
Why no one try to Help me please
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Up up up
help !!!!
benladen said:
Up up up
help !!!!
Click to expand...
Click to collapse
help
benladen said:
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Click to expand...
Click to collapse
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
you help me a lot man !!!!!
oscarblue48 said:
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
Click to expand...
Click to collapse
Thank you so much man you help me a lot !!!
This how i get preloader
1-remove the battery
2-connect the phone to usb but before windows detect the device put the battery back
windows will detect preloder driver !!that's great
Now must go to my office i have windows 7 there to flash the phone with stock room and i will put the result later here
because i have win8.1 at home i get a lot of problem flashing this phone on it .
thank's again Peace.
oscarblue48 said:
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
Click to expand...
Click to collapse
Hello, I can't Flash the phone over the preloder i have try 2 pcs and 2 diffrent drivers no luck the sp tool give me errors 4010... 2020
after trying many times i got flashed over the mediatek usb port ....
then the usb disconnect and the MediaTek DA USB VCOM connect and the flash begin utill 100%
but the phone not starting just black screen
try to format , upgrade , download nothing try 23 stock roms the old and the new nothing
please help help !!!
Do you see the preloader driver in device manager when you connect your phone as I described above?
Which build of SPflashtool are you using? the tool is quite buggy and sometimes helps to try another version
oscarblue48 said:
Do you see the preloader driver in device manager when you connect your phone as I described above?
Which build of SPflashtool are you using? the tool is quite buggy and sometimes helps to try another version
Click to expand...
Click to collapse
I don't see preloader driver i see just mediatek usb port
I am using SP Flash Tool v3.1328.0.183 and other versions
Now the flash not working again stop at the red bar 100% and give error 4032
i am sick with that error
i read some people get they phones alive with an loading an other preloader and the flash get throw !!!
look at this
thank you for responding man.
any One what i can do now ??!!!
Help for god sake !!
Ok, i think the only way your going to unbrick your phone is to flash the exact correct rom for it, Do you have a copy of the stock rom for your phone suitable for SPflashtool?
The link that you show is for a Feiteng H9500, that is very unlikely that it will work on your phone, the reason your phone is bricked is because you have probably flashed the wrong preloader block, and that is whats causing the trouble, you need to make sure you have the correct rom for your device before you start.
I think the only time you had a little success is when you accidentally entered preloader mode and if it were my phone I would concentrate on getting the preloader driver installed. There are some tutorials on here to install the drivers, it can be a bit tricky, and not all mediatek devices are the same, so a bit of trial and error may be needed
Once you have the Preloader usb vcom drivers installed I would then attempt to flash just the preloader and dsp_bl blocks initially from the correct rom for your phone, and then if successful flash the remainder of the rom, without preloader and dsp_bl
If you flash the wrong preloader/dsp_bl you will almost certainly brick your phone, so it must be either from a backup you have made of your original rom or from the exact stock rom for your phone.
oscarblue48 said:
Ok, i think the only way your going to unbrick your phone is to flash the exact correct rom for it, Do you have a copy of the stock rom for your phone suitable for SPflashtool?
The link that you show is for a Feiteng H9500, that is very unlikely that it will work on your phone, the reason your phone is bricked is because you have probably flashed the wrong preloader block, and that is whats causing the trouble, you need to make sure you have the correct rom for your device before you start.
I think the only time you had a little success is when you accidentally entered preloader mode and if it were my phone I would concentrate on getting the preloader driver installed. There are some tutorials on here to install the drivers, it can be a bit tricky, and not all mediatek devices are the same, so a bit of trial and error may be needed
Once you have the Preloader usb vcom drivers installed I would then attempt to flash just the preloader and dsp_bl blocks initially from the correct rom for your phone, and then if successful flash the remainder of the rom, without preloader and dsp_bl
If you flash the wrong preloader/dsp_bl you will almost certainly brick your phone, so it must be either from a backup you have made of your original rom or from the exact stock rom for your phone.
Click to expand...
Click to collapse
Thank you for you respond ,
i have Preloader usb vcom inslalled on my PC i have 3x stock roms from the NEO website all does not working always red bar 100% and get error 4032 on SP flash tool
Do you want to say that i will contact someone have the same model of my phone and tell him to make backup to his phone and upload it for me ? is it right ?
i have lenovo P780 when i turn it off and plug it to usb he detect it preloader mediatek then Disappears , thats what the NEO N003 must be :crying:
any way if some one have a rom work with my phone plz upload it for me
thank you again peace.
benladen said:
Thank you for you respond ,
i have Preloader usb vcom inslalled on my PC i have 3x stock roms from the NEO website all does not working always red bar 100% and get error 4032 on SP flash tool
Do you want to say that i will contact someone have the same model of my phone and tell him to make backup to his phone and upload it for me ? is it right ?
i have lenovo P780 when i turn it off and plug it to usb he detect it preloader mediatek then Disappears , thats what the NEO N003 must be :crying:
any way if some one have a rom work with my phone plz upload it for me
thank you again peace.
Click to expand...
Click to collapse
So the preloader vcom driver is installed ok on your pc, but you do not see it when you connect your phone, maybe you need to connect in a different way, on my phone I have to connect switched off phone with the battery removed, and when the battery is put in, then you see preloader driver pop up in device manager, there are many different MTK phones and different ways to connect.
The stock rom you have should be fine as long as it is the correct one for your device.
oscarblue48 said:
So the preloader vcom driver is installed ok on your pc, but you do not see it when you connect your phone, maybe you need to connect in a different way, on my phone I have to connect switched off phone with the battery removed, and when the battery is put in, then you see preloader driver pop up in device manager, there are many different MTK phones and different ways to connect.
The stock ROM you have should be fine as long as it is the correct one for your device.
Click to expand...
Click to collapse
the phone does not start at all not logo no no nothing is just black screen i have try this before connect the device then put the battery on it when it connect it's work first time the preloader device show , but i can not flash the ROM with it the sp flash tool give me error
i was able the flash it with mediatek usb port but the phone does not start black screen
, now i can't enter to the preloader device or even flash it with mediatek usb port !!!!!
yes its correct ROM i flash the phone with it before ...i brick the phone by root it by software name GENO the phone just stop working
i have use all the combination button but not luck i am stuck at mediatek usb port and sp tool give me error 4032....
:crying::crying::crying:
benladen said:
the phone does not start at all not logo no no nothing is just black screen i have try this before connect the device then put the battery on it when it connect it's work first time the preloader device show , but i can not flash the ROM with it the sp flash tool give me error
i was able the flash it with mediatek usb port but the phone does not start black screen
, now i can't enter to the preloader device or even flash it with mediatek usb port !!!!!
yes its correct ROM i flash the phone with it before ...i brick the phone by root it by software name GENO the phone just stop working
i have use all the combination button but not luck i am stuck at mediatek usb port and sp tool give me error 4032....
:crying::crying::crying:
Click to expand...
Click to collapse
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
oscarblue48 said:
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
Click to expand...
Click to collapse
ok thank you i will see what i can do !!
oscarblue48 said:
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
Click to expand...
Click to collapse
Hello, man can you Help me to find Test point
look at the picture down here
thank you.
benladen said:
Hello, man can you Help me to find Test point
Click to expand...
Click to collapse
As I said, Ive never done this myself, only read about it and have no idea where the test point is on your phone, they all appear to be in different places, on an mt6577 I had previously it was easy to find, just by the sim slot, there was no need to even strip the phone down, but on most other models they all seem to be less accessible. It will be somewhere on the main board I would imagine, usually, but not always, a small round brass dot about 2mm accross, and I noticed while searching that some are marked 'KCOLO' or similar. I believe also from what I've read that the manufacturers use this method to input the factory rom, so it must be there somewhere, its just a question of locating it. The best method to find it apparently is by testing different points with a multimeter to find one that corresponds with your battery output.
some more info here... http://forum.xda-developers.com/showpost.php?p=32424838&postcount=616
and a link to rua1's russian thread on the subject, translation with google chrome is not very good but there are some pics throughout the thread that might be helpful.... http://forum.china-iphone.ru/test-pointi-dlya-proshivki-preloader-na-mt6573-75-77-t22559.html
Hi guys,
I was recently trying to recover my IMEIs, I have formatted my device using SP Flash tool and when I tried to flash stock ROM after format, my PC is unable to recognize my device, I went to device manager and when I disconnected and reconnected my device to PC it is not showing any Preloader MT65xx, some "Alcatel .................." hardware is showing.
Please guide me how can make my Preloader visible in device manager. Please do not direct me to a tutorial of Installing VCOM driver, I know how to install VCOM driver, here I am unable to see my Preloader in the device manager.
dead_calm said:
Hi guys,
I was recently trying to recover my IMEIs, I have formatted my device using SP Flash tool and when I tried to flash stock ROM after format, my PC is unable to recognize my device, I went to device manager and when I disconnected and reconnected my device to PC it is not showing any Preloader MT65xx, some "Alcatel .................." hardware is showing.
Please guide me how can make my Preloader visible in device manager. Please do not direct me to a tutorial of Installing VCOM driver, I know how to install VCOM driver, here I am unable to see my Preloader in the device manager.
Click to expand...
Click to collapse
GUIDE TO RE FLASH/RECOVER/FIX IMEI (TESTED ON MICROMAX CANVAS HD A116)
If your problem is still not solved, the follow these steps:
1. Download SP flash tools, USB driver for your device, stock rom for your device.
2. Install usb drivers (no need to istall preloader etc.)
3. Run sp flash tools.
4. In scatter file, give path from stock rom (downladed as said above).
5. Remove battery, sim, and memory card all from your device.
6. On sp tools, click format and select whole flash.
7. Now keeping power button and volume buttons pressed, connect your device to pc/laptop. HOLD THE PHONE AS IS TILL SP TOOLS SAYS OK WITH GREEN CIRCLE.
8. Disconect your device after green signal on sp tool.
9. Click download on sp tools, and then follow step 7 as is. DO NOT RELEASE BUTTONS OR DISCONNECT PHONE TILL GREEN SUGNAL COMES.
10. Now install battery, sim n all. and reboot phone. Now if it stuck in boot loop. then install custom rom via recovery.
After rebooting your phone, got to engg mode and type your IMEI number and reboot andENJOY
HELP FROM WAVE RIDER
Hello
I have trouve flashing twrp on my leagoo z5 mt6580 with Android 6.0
Kingroot doesn't work
And there is a file on needrom for twrp but i can't flash it. Maybe because i don't understand sp flash tool
If some one could be so nice to explain to me how to get it working.
I tried many thing. But sp flash doesn't do anything when i press download...
Thanks in advance.
reggiexp said:
Hello
I have trouve flashing twrp on my leagoo z5 mt6580 with Android 6.0
Kingroot doesn't work
And there is a file on needrom for twrp but i can't flash it. Maybe because i don't understand sp flash tool
If some one could be so nice to explain to me how to get it working.
I tried many thing. But sp flash doesn't do anything when i press download...
Thanks in advance.
Click to expand...
Click to collapse
SP Flash Tool works through preloader. Usually when you power up your phone, preloader kicks in first and sets up it's own device on USB port. You have a split second to start talking to it, otherwise it will load the next part of software, which will set up another device on the port.
What do you have to do:
Double-check your USB cable! Cable problems can lead to weird errors in SPF tool.
Shut down your phone completely, remove/insert the battery after it to be 100% sure that the phone is shut down.
Set up SPF Tool, hit download button
Connect your phone to PC via USB cable
At this step, your phone should power up, but if it doesn't in reasonable time (say, 10 seconds), press the power button to switch it on
If everything done right, the following happens:
Your PC finds "mediatek preloader" device or something similar
Red progress bar starts running in SPF tool, it means DL helper firmware is being transferred to the phone
Blue (or green) progress bar starts running, indicating your data being downloaded
A window with green circle appears, your data has been uploaded successfully
FLASHED 2.DUMP_ROM [SPFT][ROOTED] FROM All About CherryMobile Flare 4 AFTER IT SAYS FLASHING IS DONE 100% WITH CHECK MARK THEN MY PHONE DIDNT RESTART I WAITED FOR ABOUT 15 MINUTES TO SEE IF THERE'S SOMETHING MIGHT HAPPEN BUT NOTHING ONLY BLACK..
SO I PULLED THE USB CONNECTOR, THEN PLUG IT BACK. THE ONLY THING THAT I SAW IS UNRECOGNIZED USB. NO CHARGING LOGO OR ANDROID OR ANYTHING EVEN THE LED INDICATION OF CHARGING IS NOT BLINKING.
I HOPE SOMEONE CAN HELP ME :crying::crying::crying::crying::crying::crying::crying:
UP
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
AlexanderBabansky said:
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
Click to expand...
Click to collapse
thanks bro.
now it show dram fail (4032)