Any one know of a way to run Java phone applications
in the Xda ? I am interested to run the Stock Watch application in this link:
http://wap.digi.com.my/
I have DL the file to My Document folder.
What do I do now?
There is no problem browsing the site with PIE or EzWAP.
Yes, there are some providers of JRE for the Pocket PC.
"Personal Java" by Sun should be free of charge.
Check:
http://java.sun.com/j2me/
regards,
Tks koponet.
But java is just TOO HARD.
I hv work round by using mulitple windows in
ftxPBrowser for my favorites.
Dont think theres a j2me for pocket pc anyway.
there are j2me for pocketpc
http://www.comp.lancs.ac.uk/computing/users/fittond/ppcjava.html
http://mindprod.com/jgloss/pocketpc.html
Actually Ive got SuperWaba installed and runing on the Xda. But I am a complete dote with java. What do I do with these two files to install and run it:
stockwatch.jad and stockwatch.jar :roll:
Hi Gurus
I have downloaded .NET CF2 from Microsoft to my PC. How do I install it to my SPV. Its 37MB in size and is a .msi file. Do I install it on my PC and will it install on SPV on next connect ??
All help appreciated.
Asif
Somebody must know from amonst you gurus how to do this.
Dont be shy now.
Install that downloaded msi file onto your desktop PC. If you want to grab it manually the cab file for your PPC is in one of the folders it creates in Program Files. Can't remember which.
Thanx Chunkymonkey
Presumabley, once installed on my PC it will be migrated to my SPV on next connect.
Regards
Asif
When I installed it I made sure that my phone was connected and synced to my pc before installing the msi file to my pc then it did both automatically.
Cheers
Barney
hello
i have samsung ativs i8750 windows 8 phone
can i change my os to android jelly bean...?
it is possible to use android jelly?
Convert your Windows Mobile into Android
There are two mobile operating systems that rule the portable world now a days, one is Apple iPhone OS and another is Google’s Android, both are unique in their own way. So if you have any Windows mobile and desire for an Android one, needn’t to go and buy from your pocket, instead follow some simple steps as the following and u can use Android OS in the mobile.
Technically A Windows Mobile has all the requirements of any Android Device, to convert you just have to install the OS and use it. As the primary OS is Windows and integrated into the mobile, android can’t be used directly by replacing the Windows or emulating via any software, instead we will use a Boot Loader named HaRET to reboot the mobile into Android Operating System.
To get started, several files are needed to be downloaded. First, Android files for your Phone Type is required to boot in the ROM, and then the HaRET application will use the android files to load the Android Operating System Environment after rebooting. Current GSM sets will work fine whereas old CDMA seta may not be able to boot into Android OS at all.
Search Google for the phone type with the model number to get the Google Android files, which may come in a compressed single file or a set of files listed in a type directory. While choosing the files, make sure the following files are included :
ü zImage (System kernel)
ü rootfs.img (root image file)
ü Initrd.gz (Initialization file to load Android)
ü system.sqsh (pack of Android System files)
ü default.txt (System Information & Settings)
ü HaRET.exe (Boot Loader Application)
Download these files, unpack if it comes in archived format and put all of them in a single directory. Then Connect the mobile with the PC or laptop in which these files are stored via USB or Bluetooth or Wi-Fi whichever required. Before connecting, it’s safe to format the mobile and remove any Memory Stick, that will decrease chance of confliction. Then transfer all these files from the folder on the Root Folder of the Mobile. For most of the Windows mobile, it is ‘My Device’ but check if this folder is under anything or the root folder.
After arranging, it’s time to change the mobile setting into Android compatible one. Open the default.txt file and change settings according to device hardware specifications. A little searching and working will do the trick, and the task is not so difficult, like great intelligence is not needed to understand that mddi.width = 320 & mddi.height = 480 are the default screen resolutions and you will need to change them according to your mobile. The following picture will help you out a lot.
After changing all the settings, or which u require, disconnect the device from PC or Laptop. Now go to the file explorer to open the HaRET.exe which will reboot your Windows Device into Android One using the files you put in the root folder.
If you want to load the Windows Operating System again, just press & hold the End button or hard Reboot, that will do the trick. Risk is not much involved in this process but problems may occur if u have a Unlocked SIM, that have to be Unlocked again in Android, which is not so tough task to do.
Source: Tiptopelectronics.com.au
samsung ativs i8750 android os
amitpurwar88 said:
There are two mobile operating systems that rule the portable world now a days, one is Apple iPhone OS and another is Google’s Android, both are unique in their own way. So if you have any Windows mobile and desire for an Android one, needn’t to go and buy from your pocket, instead follow some simple steps as the following and u can use Android OS in the mobile.
Technically A Windows Mobile has all the requirements of any Android Device, to convert you just have to install the OS and use it. As the primary OS is Windows and integrated into the mobile, android can’t be used directly by replacing the Windows or emulating via any software, instead we will use a Boot Loader named HaRET to reboot the mobile into Android Operating System.
To get started, several files are needed to be downloaded. First, Android files for your Phone Type is required to boot in the ROM, and then the HaRET application will use the android files to load the Android Operating System Environment after rebooting. Current GSM sets will work fine whereas old CDMA seta may not be able to boot into Android OS at all.
Search Google for the phone type with the model number to get the Google Android files, which may come in a compressed single file or a set of files listed in a type directory. While choosing the files, make sure the following files are included :
ü zImage (System kernel)
ü rootfs.img (root image file)
ü Initrd.gz (Initialization file to load Android)
ü system.sqsh (pack of Android System files)
ü default.txt (System Information & Settings)
ü HaRET.exe (Boot Loader Application)
Download these files, unpack if it comes in archived format and put all of them in a single directory. Then Connect the mobile with the PC or laptop in which these files are stored via USB or Bluetooth or Wi-Fi whichever required. Before connecting, it’s safe to format the mobile and remove any Memory Stick, that will decrease chance of confliction. Then transfer all these files from the folder on the Root Folder of the Mobile. For most of the Windows mobile, it is ‘My Device’ but check if this folder is under anything or the root folder.
After arranging, it’s time to change the mobile setting into Android compatible one. Open the default.txt file and change settings according to device hardware specifications. A little searching and working will do the trick, and the task is not so difficult, like great intelligence is not needed to understand that mddi.width = 320 & mddi.height = 480 are the default screen resolutions and you will need to change them according to your mobile. The following picture will help you out a lot.
After changing all the settings, or which u require, disconnect the device from PC or Laptop. Now go to the file explorer to open the HaRET.exe which will reboot your Windows Device into Android One using the files you put in the root folder.
If you want to load the Windows Operating System again, just press & hold the End button or hard Reboot, that will do the trick. Risk is not much involved in this process but problems may occur if u have a Unlocked SIM, that have to be Unlocked again in Android, which is not so tough task to do.
Source: Tiptopelectronics.com.au
Click to expand...
Click to collapse
thanx for the replay can i have link for samsung ativs i8750 android os plzzzz
Where do i get this files?
Hm?..
Sounds funny
this is complete bull****, you can't put android on the ativ s, discussion closed
Hello Everyone,
I am assigned into a new project which is based on Oracle Mobile Supply Chain Architecture(MSCA), our client is using Motrolla MC9091 and the OS is (Windows 6.5).
I need to Start a .exe file automatically when the device gets started, my friends suggested me that it can be achieved using .bat file but in this forum i found that its not possible to create a batch file in windows mobile.
So , please tell me any idea. How to run .exe file automatically when the device gets started and can we write a .bat file in windows 6.5.
Thanks in Advance
put a shortcut to the .exe in the windows startup folder.
If have more complex commands you want run use mortscript to create a script (bit like batch) to complete required functions & add this script via a link to startup folder .
hi, I'm a newbie on android.
I'm building AOSP on a remote server and cannot run emulator on it due to I have only ssh access. So I want to copy the system images I built to my local Windows PC to run.
I installed Android Suite on my local Windows PC and install AVD manager, I can run google images with the emulator.
But my problem is I can not run with my images on my Windows PC.
What I did is just replace the system.img in "C:\Users\MYACCOUNT\AppData\Local\Android\Sdk\system-images\android-29\google_apis\x86_64" with the system-qemu.img (renamed to system.img）.
P.s.：The system.img I built is also "aosp_x86_64-eng".
Can anybody give me any guide what should I do on this? Thansk in adv.